Fix path for nfs mounts, and correct sysctl
[dragonfly.git] / etc / rc.firewall
1 #!/bin/sh
2 # Copyright (c) 1996  Poul-Henning Kamp
3 # All rights reserved.
4 #
5 # Redistribution and use in source and binary forms, with or without
6 # modification, are permitted provided that the following conditions
7 # are met:
8 # 1. Redistributions of source code must retain the above copyright
9 #    notice, this list of conditions and the following disclaimer.
10 # 2. Redistributions in binary form must reproduce the above copyright
11 #    notice, this list of conditions and the following disclaimer in the
12 #    documentation and/or other materials provided with the distribution.
13 #
14 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 # ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 # SUCH DAMAGE.
25 #
26 # $FreeBSD: src/etc/rc.firewall,v 1.30.2.16 2003/02/10 05:45:06 trhodes Exp $
27 # $DragonFly: src/etc/rc.firewall,v 1.2 2003/06/17 04:24:45 dillon Exp $
28 #
29
30 #
31 # Setup system for firewall service.
32 #
33
34 # Suck in the configuration variables.
35 if [ -z "${source_rc_confs_defined}" ]; then
36         if [ -r /etc/defaults/rc.conf ]; then
37                 . /etc/defaults/rc.conf
38                 source_rc_confs
39         elif [ -r /etc/rc.conf ]; then
40                 . /etc/rc.conf
41         fi
42 fi
43
44 ############
45 # Define the firewall type in /etc/rc.conf.  Valid values are:
46 #   open     - will allow anyone in
47 #   client   - will try to protect just this machine
48 #   simple   - will try to protect a whole network
49 #   closed   - totally disables IP services except via lo0 interface
50 #   UNKNOWN  - disables the loading of firewall rules.
51 #   filename - will load the rules in the given filename (full path required)
52 #
53 # For ``client'' and ``simple'' the entries below should be customized
54 # appropriately.
55
56 ############
57 #
58 # If you don't know enough about packet filtering, we suggest that you
59 # take time to read this book:
60 #
61 #       Building Internet Firewalls, 2nd Edition
62 #       Brent Chapman and Elizabeth Zwicky
63 #
64 #       O'Reilly & Associates, Inc
65 #       ISBN 1-56592-871-7
66 #       http://www.ora.com/
67 #       http://www.oreilly.com/catalog/fire2/
68 #
69 # For a more advanced treatment of Internet Security read:
70 #
71 #       Firewalls & Internet Security
72 #       Repelling the wily hacker
73 #       William R. Cheswick, Steven M. Bellowin
74 #
75 #       Addison-Wesley
76 #       ISBN 0-201-63357-4
77 #       http://www.awl.com/
78 #       http://www.awlonline.com/product/0%2C2627%2C0201633574%2C00.html
79 #
80
81 setup_loopback () {
82         ############
83         # Only in rare cases do you want to change these rules
84         #
85         ${fwcmd} add 100 pass all from any to any via lo0
86         ${fwcmd} add 200 deny all from any to 127.0.0.0/8
87         ${fwcmd} add 300 deny ip from 127.0.0.0/8 to any
88 }
89
90 if [ -n "${1}" ]; then
91         firewall_type="${1}"
92 fi
93
94 ############
95 # Set quiet mode if requested
96 #
97 case ${firewall_quiet} in
98 [Yy][Ee][Ss])
99         fwcmd="/sbin/ipfw -q"
100         ;;
101 *)
102         fwcmd="/sbin/ipfw"
103         ;;
104 esac
105
106 ############
107 # Flush out the list before we begin.
108 #
109 ${fwcmd} -f flush
110
111 ############
112 # Network Address Translation.  All packets are passed to natd(8)
113 # before they encounter your remaining rules.  The firewall rules
114 # will then be run again on each packet after translation by natd
115 # starting at the rule number following the divert rule.
116 #
117 # For ``simple'' firewall type the divert rule should be put to a
118 # different place to not interfere with address-checking rules.
119 #
120 case ${firewall_type} in
121 [Oo][Pp][Ee][Nn]|[Cc][Ll][Ii][Ee][Nn][Tt])
122         case ${natd_enable} in
123         [Yy][Ee][Ss])
124                 if [ -n "${natd_interface}" ]; then
125                         ${fwcmd} add 50 divert natd all from any to any via ${natd_interface}
126                 fi
127                 ;;
128         esac
129 esac
130
131 ############
132 # If you just configured ipfw in the kernel as a tool to solve network
133 # problems or you just want to disallow some particular kinds of traffic
134 # then you will want to change the default policy to open.  You can also
135 # do this as your only action by setting the firewall_type to ``open''.
136 #
137 # ${fwcmd} add 65000 pass all from any to any
138
139
140 # Prototype setups.
141 #
142 case ${firewall_type} in
143 [Oo][Pp][Ee][Nn])
144         setup_loopback
145         ${fwcmd} add 65000 pass all from any to any
146         ;;
147
148 [Cc][Ll][Ii][Ee][Nn][Tt])
149         ############
150         # This is a prototype setup that will protect your system somewhat
151         # against people from outside your own network.
152         ############
153
154         # set these to your network and netmask and ip
155         net="192.0.2.0"
156         mask="255.255.255.0"
157         ip="192.0.2.1"
158
159         setup_loopback
160
161         # Allow any traffic to or from my own net.
162         ${fwcmd} add pass all from ${ip} to ${net}:${mask}
163         ${fwcmd} add pass all from ${net}:${mask} to ${ip}
164
165         # Allow TCP through if setup succeeded
166         ${fwcmd} add pass tcp from any to any established
167
168         # Allow IP fragments to pass through
169         ${fwcmd} add pass all from any to any frag
170
171         # Allow setup of incoming email
172         ${fwcmd} add pass tcp from any to ${ip} 25 setup
173
174         # Allow setup of outgoing TCP connections only
175         ${fwcmd} add pass tcp from ${ip} to any setup
176
177         # Disallow setup of all other TCP connections
178         ${fwcmd} add deny tcp from any to any setup
179
180         # Allow DNS queries out in the world
181         ${fwcmd} add pass udp from ${ip} to any 53 keep-state
182
183         # Allow NTP queries out in the world
184         ${fwcmd} add pass udp from ${ip} to any 123 keep-state
185
186         # Everything else is denied by default, unless the
187         # IPFIREWALL_DEFAULT_TO_ACCEPT option is set in your kernel
188         # config file.
189         ;;
190
191 [Ss][Ii][Mm][Pp][Ll][Ee])
192         ############
193         # This is a prototype setup for a simple firewall.  Configure this
194         # machine as a named server and ntp server, and point all the machines
195         # on the inside at this machine for those services.
196         ############
197
198         # set these to your outside interface network and netmask and ip
199         oif="ed0"
200         onet="192.0.2.0"
201         omask="255.255.255.240"
202         oip="192.0.2.1"
203
204         # set these to your inside interface network and netmask and ip
205         iif="ed1"
206         inet="192.0.2.16"
207         imask="255.255.255.240"
208         iip="192.0.2.17"
209
210         setup_loopback
211
212         # Stop spoofing
213         ${fwcmd} add deny all from ${inet}:${imask} to any in via ${oif}
214         ${fwcmd} add deny all from ${onet}:${omask} to any in via ${iif}
215
216         # Stop RFC1918 nets on the outside interface
217         ${fwcmd} add deny all from any to 10.0.0.0/8 via ${oif}
218         ${fwcmd} add deny all from any to 172.16.0.0/12 via ${oif}
219         ${fwcmd} add deny all from any to 192.168.0.0/16 via ${oif}
220
221         # Stop draft-manning-dsua-03.txt (1 May 2000) nets (includes RESERVED-1,
222         # DHCP auto-configuration, NET-TEST, MULTICAST (class D), and class E)
223         # on the outside interface
224         ${fwcmd} add deny all from any to 0.0.0.0/8 via ${oif}
225         ${fwcmd} add deny all from any to 169.254.0.0/16 via ${oif}
226         ${fwcmd} add deny all from any to 192.0.2.0/24 via ${oif}
227         ${fwcmd} add deny all from any to 224.0.0.0/4 via ${oif}
228         ${fwcmd} add deny all from any to 240.0.0.0/4 via ${oif}
229
230         # Network Address Translation.  This rule is placed here deliberately
231         # so that it does not interfere with the surrounding address-checking
232         # rules.  If for example one of your internal LAN machines had its IP
233         # address set to 192.0.2.1 then an incoming packet for it after being
234         # translated by natd(8) would match the `deny' rule above.  Similarly
235         # an outgoing packet originated from it before being translated would
236         # match the `deny' rule below.
237         case ${natd_enable} in
238         [Yy][Ee][Ss])
239                 if [ -n "${natd_interface}" ]; then
240                         ${fwcmd} add divert natd all from any to any via ${natd_interface}
241                 fi
242                 ;;
243         esac
244
245         # Stop RFC1918 nets on the outside interface
246         ${fwcmd} add deny all from 10.0.0.0/8 to any via ${oif}
247         ${fwcmd} add deny all from 172.16.0.0/12 to any via ${oif}
248         ${fwcmd} add deny all from 192.168.0.0/16 to any via ${oif}
249
250         # Stop draft-manning-dsua-03.txt (1 May 2000) nets (includes RESERVED-1,
251         # DHCP auto-configuration, NET-TEST, MULTICAST (class D), and class E)
252         # on the outside interface
253         ${fwcmd} add deny all from 0.0.0.0/8 to any via ${oif}
254         ${fwcmd} add deny all from 169.254.0.0/16 to any via ${oif}
255         ${fwcmd} add deny all from 192.0.2.0/24 to any via ${oif}
256         ${fwcmd} add deny all from 224.0.0.0/4 to any via ${oif}
257         ${fwcmd} add deny all from 240.0.0.0/4 to any via ${oif}
258
259         # Allow TCP through if setup succeeded
260         ${fwcmd} add pass tcp from any to any established
261
262         # Allow IP fragments to pass through
263         ${fwcmd} add pass all from any to any frag
264
265         # Allow setup of incoming email
266         ${fwcmd} add pass tcp from any to ${oip} 25 setup
267
268         # Allow access to our DNS
269         ${fwcmd} add pass tcp from any to ${oip} 53 setup
270         ${fwcmd} add pass udp from any to ${oip} 53
271         ${fwcmd} add pass udp from ${oip} 53 to any
272
273         # Allow access to our WWW
274         ${fwcmd} add pass tcp from any to ${oip} 80 setup
275
276         # Reject&Log all setup of incoming connections from the outside
277         ${fwcmd} add deny log tcp from any to any in via ${oif} setup
278
279         # Allow setup of any other TCP connection
280         ${fwcmd} add pass tcp from any to any setup
281
282         # Allow DNS queries out in the world
283         ${fwcmd} add pass udp from ${oip} to any 53 keep-state
284
285         # Allow NTP queries out in the world
286         ${fwcmd} add pass udp from ${oip} to any 123 keep-state
287
288         # Everything else is denied by default, unless the
289         # IPFIREWALL_DEFAULT_TO_ACCEPT option is set in your kernel
290         # config file.
291         ;;
292
293 [Cc][Ll][Oo][Ss][Ee][Dd])
294         setup_loopback
295         ;;
296 [Uu][Nn][Kk][Nn][Oo][Ww][Nn])
297         ;;
298 *)
299         if [ -r "${firewall_type}" ]; then
300                 ${fwcmd} ${firewall_flags} ${firewall_type}
301         fi
302         ;;
303 esac