kernel - Limit tags allocated to reads or writes for CAM/scsi/ahci disks
[dragonfly.git] / sys / bus / cam / cam_queue.h
1 /*
2  * CAM request queue management definitions.
3  *
4  * Copyright (c) 1997 Justin T. Gibbs.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  *
28  * $FreeBSD: src/sys/cam/cam_queue.h,v 1.6 1999/12/29 04:54:26 peter Exp $
29  * $DragonFly: src/sys/bus/cam/cam_queue.h,v 1.3 2004/03/15 01:10:30 dillon Exp $
30  */
31
32 #ifndef _CAM_CAM_QUEUE_H
33 #define _CAM_CAM_QUEUE_H 1
34
35 #ifdef _KERNEL
36
37 #include <sys/queue.h>
38
39 /*
40  * This structure implements a heap based priority queue.  The queue
41  * assumes that the objects stored in it begin with a cam_qentry
42  * structure holding the priority information used to sort the objects.
43  * This structure is opaque to clients (outside of the XPT layer) to allow
44  * the implementation to change without affecting them.
45  */
46 struct camq {
47         cam_pinfo **queue_array;
48         int        array_size;
49         int        entries;
50         u_int32_t  generation;
51         u_int32_t  qfrozen_cnt;
52 };
53
54 TAILQ_HEAD(ccb_hdr_tailq, ccb_hdr);
55 LIST_HEAD(ccb_hdr_list, ccb_hdr);
56 SLIST_HEAD(ccb_hdr_slist, ccb_hdr);
57
58 struct cam_ccbq {
59         struct  camq queue;
60         int     devq_openings;
61         int     dev_openings;   
62         int     dev_active;
63         int     held;
64         struct  ccb_hdr_tailq active_ccbs;
65 };
66
67 struct cam_ed;
68
69 struct cam_devq {
70         struct  camq alloc_queue;
71         struct  camq send_queue;
72         struct  cam_ed *active_dev;
73         int     alloc_openings;
74         int     alloc_active;
75         int     send_openings;
76         int     send_active;
77         int     refcount;
78         int     max_openings;
79 };
80
81
82 struct cam_devq *cam_devq_alloc(int devices, int openings);
83
84 int              cam_devq_init(struct cam_devq *devq, int devices,
85                                int openings);
86 void             cam_devq_reference(struct cam_devq *devq);
87 void             cam_devq_release(struct cam_devq *devq);
88 u_int32_t        cam_devq_resize(struct cam_devq *camq, int openings);
89 void             cam_devq_set_openings(struct cam_devq *devq, int openings);
90
91         
92 /*
93  * Allocate a cam_ccb_queue structure and initialize it.
94  */
95 struct cam_ccbq *cam_ccbq_alloc(int openings);
96
97 u_int32_t       cam_ccbq_resize(struct cam_ccbq *ccbq, int devices);
98
99 int             cam_ccbq_init(struct cam_ccbq *ccbq, int openings);
100
101 void            cam_ccbq_free(struct cam_ccbq *ccbq);
102
103 void            cam_ccbq_fini(struct cam_ccbq *ccbq);
104
105 /*
106  * Allocate and initialize a cam_queue structure.
107  */
108 struct camq     *camq_alloc(int size);
109
110 /*
111  * Resize a cam queue
112  */
113 u_int32_t       camq_resize(struct camq *queue, int new_size);
114
115 /* 
116  * Initialize a camq structure.  Return 0 on success, 1 on failure.
117  */
118 int             camq_init(struct camq *camq, int size);
119
120 /*
121  * Free a cam_queue structure.  This should only be called if a controller
122  * driver failes somehow during its attach routine or is unloaded and has
123  * obtained a cam_queue structure.
124  */
125 void            camq_free(struct camq *queue);
126
127 /*
128  * Finialize any internal storage or state of a cam_queue.
129  */
130 void            camq_fini(struct camq *queue);
131
132 /*
133  * cam_queue_insert: Given a CAM queue with at least one open spot,
134  * insert the new entry maintaining order.
135  */
136 void            camq_insert(struct camq *queue, cam_pinfo *new_entry);
137
138 /*
139  * camq_remove: Remove and arbitrary entry from the queue maintaining
140  * queue order.
141  */
142 cam_pinfo       *camq_remove(struct camq *queue, int index);
143 #define CAMQ_HEAD 1     /* Head of queue index */
144
145 /* Index the first element in the heap */
146 #define CAMQ_GET_HEAD(camq) ((camq)->queue_array[CAMQ_HEAD])
147
148 /*
149  * camq_change_priority: Raise or lower the priority of an entry
150  * maintaining queue order.
151  */
152 void            camq_change_priority(struct camq *queue, int index,
153                                      u_int32_t new_priority);
154
155 static __inline int
156 cam_ccbq_pending_ccb_count(struct cam_ccbq *ccbq);
157
158 static __inline void
159 cam_ccbq_take_opening(struct cam_ccbq *ccbq);
160
161 static __inline void
162 cam_ccbq_insert_ccb(struct cam_ccbq *ccbq, union ccb *new_ccb);
163
164 static __inline void
165 cam_ccbq_remove_ccb(struct cam_ccbq *ccbq, union ccb *ccb);
166
167 static __inline union ccb *
168 cam_ccbq_peek_ccb(struct cam_ccbq *ccbq, int index);
169
170 static __inline void
171 cam_ccbq_send_ccb(struct cam_ccbq *queue, union ccb *send_ccb);
172
173 static __inline void
174 cam_ccbq_ccb_done(struct cam_ccbq *ccbq, union ccb *done_ccb);
175
176 static __inline void
177 cam_ccbq_release_opening(struct cam_ccbq *ccbq);
178
179
180 static __inline int
181 cam_ccbq_pending_ccb_count(struct cam_ccbq *ccbq)
182 {
183         return (ccbq->queue.entries);
184 }
185
186 static __inline void
187 cam_ccbq_take_opening(struct cam_ccbq *ccbq)
188 {
189         ccbq->devq_openings--;
190         ccbq->held++;
191 }
192
193 static __inline void
194 cam_ccbq_insert_ccb(struct cam_ccbq *ccbq, union ccb *new_ccb)
195 {
196         ccbq->held--;
197         camq_insert(&ccbq->queue, &new_ccb->ccb_h.pinfo);
198 }
199
200 static __inline void
201 cam_ccbq_remove_ccb(struct cam_ccbq *ccbq, union ccb *ccb)
202 {
203         camq_remove(&ccbq->queue, ccb->ccb_h.pinfo.index);
204 }
205
206 static __inline union ccb *
207 cam_ccbq_peek_ccb(struct cam_ccbq *ccbq, int index)
208 {
209         return((union ccb *)ccbq->queue.queue_array[index]);
210 }
211
212 static __inline void
213 cam_ccbq_send_ccb(struct cam_ccbq *ccbq, union ccb *send_ccb)
214 {
215
216         TAILQ_INSERT_TAIL(&ccbq->active_ccbs,
217                           &(send_ccb->ccb_h),
218                           xpt_links.tqe);
219         send_ccb->ccb_h.pinfo.index = CAM_ACTIVE_INDEX;
220         ccbq->dev_active++;
221         ccbq->dev_openings--;           
222 }
223
224 static __inline void
225 cam_ccbq_ccb_done(struct cam_ccbq *ccbq, union ccb *done_ccb)
226 {
227         TAILQ_REMOVE(&ccbq->active_ccbs, &done_ccb->ccb_h,
228                      xpt_links.tqe);
229         ccbq->dev_active--;
230         ccbq->dev_openings++;   
231         ccbq->held++;
232 }
233
234 static __inline void
235 cam_ccbq_release_opening(struct cam_ccbq *ccbq)
236 {
237         ccbq->held--;
238         ccbq->devq_openings++;
239 }
240
241 #endif /* _KERNEL */
242 #endif  /* _CAM_CAM_QUEUE_H */