1 /* $FreeBSD: head/sys/dev/usb/wlan/if_rum.c 276701 2015-01-05 15:04:17Z hselasky $ */
4 * Copyright (c) 2005-2007 Damien Bergamini <damien.bergamini@free.fr>
5 * Copyright (c) 2006 Niall O'Higgins <niallo@openbsd.org>
6 * Copyright (c) 2007-2008 Hans Petter Selasky <hselasky@FreeBSD.org>
8 * Permission to use, copy, modify, and distribute this software for any
9 * purpose with or without fee is hereby granted, provided that the above
10 * copyright notice and this permission notice appear in all copies.
12 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
13 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
15 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
16 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
17 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
18 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
22 * Ralink Technology RT2501USB/RT2601USB chipset driver
23 * http://www.ralinktech.com.tw/
26 #include <sys/param.h>
27 #include <sys/sockio.h>
28 #include <sys/sysctl.h>
31 #include <sys/kernel.h>
32 #include <sys/socket.h>
33 #include <sys/systm.h>
34 #include <sys/malloc.h>
35 #include <sys/module.h>
37 #include <sys/endian.h>
43 #include <net/if_arp.h>
44 #include <net/ethernet.h>
45 #include <net/if_dl.h>
46 #include <net/if_media.h>
47 #include <net/if_types.h>
48 #include <net/ifq_var.h>
51 #include <netinet/in.h>
52 #include <netinet/in_systm.h>
53 #include <netinet/in_var.h>
54 #include <netinet/if_ether.h>
55 #include <netinet/ip.h>
58 #include <netproto/802_11/ieee80211_var.h>
59 #include <netproto/802_11/ieee80211_regdomain.h>
60 #include <netproto/802_11/ieee80211_radiotap.h>
61 #include <netproto/802_11/ieee80211_ratectl.h>
63 #include <bus/u4b/usb.h>
64 #include <bus/u4b/usbdi.h>
67 #define USB_DEBUG_VAR rum_debug
68 #include <bus/u4b/usb_debug.h>
70 #include <bus/u4b/wlan/if_rumreg.h>
71 #include <bus/u4b/wlan/if_rumvar.h>
72 #include <bus/u4b/wlan/if_rumfw.h>
75 static int rum_debug = 0;
77 static SYSCTL_NODE(_hw_usb, OID_AUTO, rum, CTLFLAG_RW, 0, "USB rum");
78 SYSCTL_INT(_hw_usb_rum, OID_AUTO, debug, CTLFLAG_RW, &rum_debug, 0,
82 #define N(a) ((int)(sizeof (a) / sizeof ((a)[0])))
84 static const STRUCT_USB_HOST_ID rum_devs[] = {
85 #define RUM_DEV(v,p) { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
86 RUM_DEV(ABOCOM, HWU54DM),
87 RUM_DEV(ABOCOM, RT2573_2),
88 RUM_DEV(ABOCOM, RT2573_3),
89 RUM_DEV(ABOCOM, RT2573_4),
90 RUM_DEV(ABOCOM, WUG2700),
91 RUM_DEV(AMIT, CGWLUSB2GO),
92 RUM_DEV(ASUS, RT2573_1),
93 RUM_DEV(ASUS, RT2573_2),
94 RUM_DEV(BELKIN, F5D7050A),
95 RUM_DEV(BELKIN, F5D9050V3),
96 RUM_DEV(CISCOLINKSYS, WUSB54GC),
97 RUM_DEV(CISCOLINKSYS, WUSB54GR),
98 RUM_DEV(CONCEPTRONIC2, C54RU2),
99 RUM_DEV(COREGA, CGWLUSB2GL),
100 RUM_DEV(COREGA, CGWLUSB2GPX),
101 RUM_DEV(DICKSMITH, CWD854F),
102 RUM_DEV(DICKSMITH, RT2573),
103 RUM_DEV(EDIMAX, EW7318USG),
104 RUM_DEV(DLINK2, DWLG122C1),
105 RUM_DEV(DLINK2, WUA1340),
106 RUM_DEV(DLINK2, DWA111),
107 RUM_DEV(DLINK2, DWA110),
108 RUM_DEV(GIGABYTE, GNWB01GS),
109 RUM_DEV(GIGABYTE, GNWI05GS),
110 RUM_DEV(GIGASET, RT2573),
111 RUM_DEV(GOODWAY, RT2573),
112 RUM_DEV(GUILLEMOT, HWGUSB254LB),
113 RUM_DEV(GUILLEMOT, HWGUSB254V2AP),
114 RUM_DEV(HUAWEI3COM, WUB320G),
115 RUM_DEV(MELCO, G54HP),
116 RUM_DEV(MELCO, SG54HP),
117 RUM_DEV(MELCO, SG54HG),
118 RUM_DEV(MELCO, WLIUCG),
119 RUM_DEV(MELCO, WLRUCG),
120 RUM_DEV(MELCO, WLRUCGAOSS),
121 RUM_DEV(MSI, RT2573_1),
122 RUM_DEV(MSI, RT2573_2),
123 RUM_DEV(MSI, RT2573_3),
124 RUM_DEV(MSI, RT2573_4),
125 RUM_DEV(NOVATECH, RT2573),
126 RUM_DEV(PLANEX2, GWUS54HP),
127 RUM_DEV(PLANEX2, GWUS54MINI2),
128 RUM_DEV(PLANEX2, GWUSMM),
129 RUM_DEV(QCOM, RT2573),
130 RUM_DEV(QCOM, RT2573_2),
131 RUM_DEV(QCOM, RT2573_3),
132 RUM_DEV(RALINK, RT2573),
133 RUM_DEV(RALINK, RT2573_2),
134 RUM_DEV(RALINK, RT2671),
135 RUM_DEV(SITECOMEU, WL113R2),
136 RUM_DEV(SITECOMEU, WL172),
137 RUM_DEV(SPARKLAN, RT2573),
138 RUM_DEV(SURECOM, RT2573),
142 static device_probe_t rum_match;
143 static device_attach_t rum_attach;
144 static device_detach_t rum_detach;
146 static usb_callback_t rum_bulk_read_callback;
147 static usb_callback_t rum_bulk_write_callback;
149 static usb_error_t rum_do_request(struct rum_softc *sc,
150 struct usb_device_request *req, void *data);
151 static struct ieee80211vap *rum_vap_create(struct ieee80211com *,
152 const char [IFNAMSIZ], int,
153 enum ieee80211_opmode,
154 int, const uint8_t [IEEE80211_ADDR_LEN],
155 const uint8_t [IEEE80211_ADDR_LEN]);
156 static void rum_vap_delete(struct ieee80211vap *);
157 static void rum_tx_free(struct rum_tx_data *, int);
158 static void rum_setup_tx_list(struct rum_softc *);
159 static void rum_unsetup_tx_list(struct rum_softc *);
160 static int rum_newstate(struct ieee80211vap *,
161 enum ieee80211_state, int);
162 static void rum_setup_tx_desc(struct rum_softc *,
163 struct rum_tx_desc *, uint32_t, uint16_t, int,
165 static int rum_tx_mgt(struct rum_softc *, struct mbuf *,
166 struct ieee80211_node *);
167 static int rum_tx_raw(struct rum_softc *, struct mbuf *,
168 struct ieee80211_node *,
169 const struct ieee80211_bpf_params *);
170 static int rum_tx_data(struct rum_softc *, struct mbuf *,
171 struct ieee80211_node *);
172 static void rum_start(struct ifnet *, struct ifaltq_subque *);
173 static int rum_ioctl(struct ifnet *, u_long, caddr_t,
175 static void rum_eeprom_read(struct rum_softc *, uint16_t, void *,
177 static uint32_t rum_read(struct rum_softc *, uint16_t);
178 static void rum_read_multi(struct rum_softc *, uint16_t, void *,
180 static usb_error_t rum_write(struct rum_softc *, uint16_t, uint32_t);
181 static usb_error_t rum_write_multi(struct rum_softc *, uint16_t, void *,
183 static void rum_bbp_write(struct rum_softc *, uint8_t, uint8_t);
184 static uint8_t rum_bbp_read(struct rum_softc *, uint8_t);
185 static void rum_rf_write(struct rum_softc *, uint8_t, uint32_t);
186 static void rum_select_antenna(struct rum_softc *);
187 static void rum_enable_mrr(struct rum_softc *);
188 static void rum_set_txpreamble(struct rum_softc *);
189 static void rum_set_basicrates(struct rum_softc *);
190 static void rum_select_band(struct rum_softc *,
191 struct ieee80211_channel *);
192 static void rum_set_chan(struct rum_softc *,
193 struct ieee80211_channel *);
194 static void rum_enable_tsf_sync(struct rum_softc *);
195 static void rum_enable_tsf(struct rum_softc *);
196 static void rum_update_slot(struct ifnet *);
197 static void rum_set_bssid(struct rum_softc *, const uint8_t *);
198 static void rum_set_macaddr(struct rum_softc *, const uint8_t *);
199 static void rum_update_mcast(struct ieee80211com *);
200 static void rum_update_promisc(struct ieee80211com *);
201 static void rum_setpromisc(struct rum_softc *);
202 static const char *rum_get_rf(int);
203 static void rum_read_eeprom(struct rum_softc *);
204 static int rum_bbp_init(struct rum_softc *);
205 static void rum_init_locked(struct rum_softc *);
206 static void rum_init(void *);
207 static void rum_stop(struct rum_softc *);
208 static void rum_load_microcode(struct rum_softc *, const uint8_t *,
210 static void rum_prepare_beacon(struct rum_softc *,
211 struct ieee80211vap *);
212 static int rum_raw_xmit(struct ieee80211_node *, struct mbuf *,
213 const struct ieee80211_bpf_params *);
214 static void rum_scan_start(struct ieee80211com *);
215 static void rum_scan_end(struct ieee80211com *);
216 static void rum_set_channel(struct ieee80211com *);
217 static int rum_get_rssi(struct rum_softc *, uint8_t);
218 static void rum_ratectl_start(struct rum_softc *,
219 struct ieee80211_node *);
220 static void rum_ratectl_timeout(void *);
221 static void rum_ratectl_task(void *, int);
222 static int rum_pause(struct rum_softc *, int);
224 static const struct {
228 { RT2573_TXRX_CSR0, 0x025fb032 },
229 { RT2573_TXRX_CSR1, 0x9eaa9eaf },
230 { RT2573_TXRX_CSR2, 0x8a8b8c8d },
231 { RT2573_TXRX_CSR3, 0x00858687 },
232 { RT2573_TXRX_CSR7, 0x2e31353b },
233 { RT2573_TXRX_CSR8, 0x2a2a2a2c },
234 { RT2573_TXRX_CSR15, 0x0000000f },
235 { RT2573_MAC_CSR6, 0x00000fff },
236 { RT2573_MAC_CSR8, 0x016c030a },
237 { RT2573_MAC_CSR10, 0x00000718 },
238 { RT2573_MAC_CSR12, 0x00000004 },
239 { RT2573_MAC_CSR13, 0x00007f00 },
240 { RT2573_SEC_CSR0, 0x00000000 },
241 { RT2573_SEC_CSR1, 0x00000000 },
242 { RT2573_SEC_CSR5, 0x00000000 },
243 { RT2573_PHY_CSR1, 0x000023b0 },
244 { RT2573_PHY_CSR5, 0x00040a06 },
245 { RT2573_PHY_CSR6, 0x00080606 },
246 { RT2573_PHY_CSR7, 0x00000408 },
247 { RT2573_AIFSN_CSR, 0x00002273 },
248 { RT2573_CWMIN_CSR, 0x00002344 },
249 { RT2573_CWMAX_CSR, 0x000034aa }
252 static const struct {
284 static const struct rfprog {
286 uint32_t r1, r2, r3, r4;
288 { 1, 0x00b03, 0x001e1, 0x1a014, 0x30282 },
289 { 2, 0x00b03, 0x001e1, 0x1a014, 0x30287 },
290 { 3, 0x00b03, 0x001e2, 0x1a014, 0x30282 },
291 { 4, 0x00b03, 0x001e2, 0x1a014, 0x30287 },
292 { 5, 0x00b03, 0x001e3, 0x1a014, 0x30282 },
293 { 6, 0x00b03, 0x001e3, 0x1a014, 0x30287 },
294 { 7, 0x00b03, 0x001e4, 0x1a014, 0x30282 },
295 { 8, 0x00b03, 0x001e4, 0x1a014, 0x30287 },
296 { 9, 0x00b03, 0x001e5, 0x1a014, 0x30282 },
297 { 10, 0x00b03, 0x001e5, 0x1a014, 0x30287 },
298 { 11, 0x00b03, 0x001e6, 0x1a014, 0x30282 },
299 { 12, 0x00b03, 0x001e6, 0x1a014, 0x30287 },
300 { 13, 0x00b03, 0x001e7, 0x1a014, 0x30282 },
301 { 14, 0x00b03, 0x001e8, 0x1a014, 0x30284 },
303 { 34, 0x00b03, 0x20266, 0x36014, 0x30282 },
304 { 38, 0x00b03, 0x20267, 0x36014, 0x30284 },
305 { 42, 0x00b03, 0x20268, 0x36014, 0x30286 },
306 { 46, 0x00b03, 0x20269, 0x36014, 0x30288 },
308 { 36, 0x00b03, 0x00266, 0x26014, 0x30288 },
309 { 40, 0x00b03, 0x00268, 0x26014, 0x30280 },
310 { 44, 0x00b03, 0x00269, 0x26014, 0x30282 },
311 { 48, 0x00b03, 0x0026a, 0x26014, 0x30284 },
312 { 52, 0x00b03, 0x0026b, 0x26014, 0x30286 },
313 { 56, 0x00b03, 0x0026c, 0x26014, 0x30288 },
314 { 60, 0x00b03, 0x0026e, 0x26014, 0x30280 },
315 { 64, 0x00b03, 0x0026f, 0x26014, 0x30282 },
317 { 100, 0x00b03, 0x0028a, 0x2e014, 0x30280 },
318 { 104, 0x00b03, 0x0028b, 0x2e014, 0x30282 },
319 { 108, 0x00b03, 0x0028c, 0x2e014, 0x30284 },
320 { 112, 0x00b03, 0x0028d, 0x2e014, 0x30286 },
321 { 116, 0x00b03, 0x0028e, 0x2e014, 0x30288 },
322 { 120, 0x00b03, 0x002a0, 0x2e014, 0x30280 },
323 { 124, 0x00b03, 0x002a1, 0x2e014, 0x30282 },
324 { 128, 0x00b03, 0x002a2, 0x2e014, 0x30284 },
325 { 132, 0x00b03, 0x002a3, 0x2e014, 0x30286 },
326 { 136, 0x00b03, 0x002a4, 0x2e014, 0x30288 },
327 { 140, 0x00b03, 0x002a6, 0x2e014, 0x30280 },
329 { 149, 0x00b03, 0x002a8, 0x2e014, 0x30287 },
330 { 153, 0x00b03, 0x002a9, 0x2e014, 0x30289 },
331 { 157, 0x00b03, 0x002ab, 0x2e014, 0x30281 },
332 { 161, 0x00b03, 0x002ac, 0x2e014, 0x30283 },
333 { 165, 0x00b03, 0x002ad, 0x2e014, 0x30285 }
335 { 1, 0x00b33, 0x011e1, 0x1a014, 0x30282 },
336 { 2, 0x00b33, 0x011e1, 0x1a014, 0x30287 },
337 { 3, 0x00b33, 0x011e2, 0x1a014, 0x30282 },
338 { 4, 0x00b33, 0x011e2, 0x1a014, 0x30287 },
339 { 5, 0x00b33, 0x011e3, 0x1a014, 0x30282 },
340 { 6, 0x00b33, 0x011e3, 0x1a014, 0x30287 },
341 { 7, 0x00b33, 0x011e4, 0x1a014, 0x30282 },
342 { 8, 0x00b33, 0x011e4, 0x1a014, 0x30287 },
343 { 9, 0x00b33, 0x011e5, 0x1a014, 0x30282 },
344 { 10, 0x00b33, 0x011e5, 0x1a014, 0x30287 },
345 { 11, 0x00b33, 0x011e6, 0x1a014, 0x30282 },
346 { 12, 0x00b33, 0x011e6, 0x1a014, 0x30287 },
347 { 13, 0x00b33, 0x011e7, 0x1a014, 0x30282 },
348 { 14, 0x00b33, 0x011e8, 0x1a014, 0x30284 },
350 { 34, 0x00b33, 0x01266, 0x26014, 0x30282 },
351 { 38, 0x00b33, 0x01267, 0x26014, 0x30284 },
352 { 42, 0x00b33, 0x01268, 0x26014, 0x30286 },
353 { 46, 0x00b33, 0x01269, 0x26014, 0x30288 },
355 { 36, 0x00b33, 0x01266, 0x26014, 0x30288 },
356 { 40, 0x00b33, 0x01268, 0x26014, 0x30280 },
357 { 44, 0x00b33, 0x01269, 0x26014, 0x30282 },
358 { 48, 0x00b33, 0x0126a, 0x26014, 0x30284 },
359 { 52, 0x00b33, 0x0126b, 0x26014, 0x30286 },
360 { 56, 0x00b33, 0x0126c, 0x26014, 0x30288 },
361 { 60, 0x00b33, 0x0126e, 0x26014, 0x30280 },
362 { 64, 0x00b33, 0x0126f, 0x26014, 0x30282 },
364 { 100, 0x00b33, 0x0128a, 0x2e014, 0x30280 },
365 { 104, 0x00b33, 0x0128b, 0x2e014, 0x30282 },
366 { 108, 0x00b33, 0x0128c, 0x2e014, 0x30284 },
367 { 112, 0x00b33, 0x0128d, 0x2e014, 0x30286 },
368 { 116, 0x00b33, 0x0128e, 0x2e014, 0x30288 },
369 { 120, 0x00b33, 0x012a0, 0x2e014, 0x30280 },
370 { 124, 0x00b33, 0x012a1, 0x2e014, 0x30282 },
371 { 128, 0x00b33, 0x012a2, 0x2e014, 0x30284 },
372 { 132, 0x00b33, 0x012a3, 0x2e014, 0x30286 },
373 { 136, 0x00b33, 0x012a4, 0x2e014, 0x30288 },
374 { 140, 0x00b33, 0x012a6, 0x2e014, 0x30280 },
376 { 149, 0x00b33, 0x012a8, 0x2e014, 0x30287 },
377 { 153, 0x00b33, 0x012a9, 0x2e014, 0x30289 },
378 { 157, 0x00b33, 0x012ab, 0x2e014, 0x30281 },
379 { 161, 0x00b33, 0x012ac, 0x2e014, 0x30283 },
380 { 165, 0x00b33, 0x012ad, 0x2e014, 0x30285 }
383 static const struct usb_config rum_config[RUM_N_TRANSFER] = {
386 .endpoint = UE_ADDR_ANY,
387 .direction = UE_DIR_OUT,
388 .bufsize = (MCLBYTES + RT2573_TX_DESC_SIZE + 8),
389 .flags = {.pipe_bof = 1,.force_short_xfer = 1,},
390 .callback = rum_bulk_write_callback,
391 .timeout = 5000, /* ms */
395 .endpoint = UE_ADDR_ANY,
396 .direction = UE_DIR_IN,
397 .bufsize = (MCLBYTES + RT2573_RX_DESC_SIZE),
398 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
399 .callback = rum_bulk_read_callback,
404 rum_match(device_t self)
406 struct usb_attach_arg *uaa = device_get_ivars(self);
408 if (uaa->usb_mode != USB_MODE_HOST)
410 if (uaa->info.bConfigIndex != 0)
412 if (uaa->info.bIfaceIndex != RT2573_IFACE_INDEX)
415 return (usbd_lookup_id_by_uaa(rum_devs, sizeof(rum_devs), uaa));
419 rum_attach(device_t self)
421 struct usb_attach_arg *uaa = device_get_ivars(self);
422 struct rum_softc *sc = device_get_softc(self);
423 struct ieee80211com *ic;
425 uint8_t iface_index, bands;
429 wlan_serialize_enter();
430 device_set_usb_desc(self);
431 sc->sc_udev = uaa->device;
434 lockinit(&sc->sc_lock, device_get_nameunit(self), 0, LK_CANRECURSE);
436 iface_index = RT2573_IFACE_INDEX;
437 error = usbd_transfer_setup(uaa->device, &iface_index,
438 sc->sc_xfer, rum_config, RUM_N_TRANSFER, sc, &sc->sc_lock);
440 device_printf(self, "could not allocate USB transfers, "
441 "err=%s\n", usbd_errstr(error));
446 /* retrieve RT2573 rev. no */
447 for (ntries = 0; ntries < 100; ntries++) {
448 if ((tmp = rum_read(sc, RT2573_MAC_CSR0)) != 0)
450 if (rum_pause(sc, hz / 100))
454 device_printf(sc->sc_dev, "timeout waiting for chip to settle\n");
459 /* retrieve MAC address and various other things from EEPROM */
462 device_printf(sc->sc_dev, "MAC/BBP RT2573 (rev 0x%05x), RF %s\n",
463 tmp, rum_get_rf(sc->rf_rev));
465 rum_load_microcode(sc, rt2573_ucode, sizeof(rt2573_ucode));
468 ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211);
470 device_printf(sc->sc_dev, "can not if_alloc()\n");
476 if_initname(ifp, "rum", device_get_unit(sc->sc_dev));
477 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
478 ifp->if_init = rum_init;
479 ifp->if_ioctl = rum_ioctl;
480 ifp->if_start = rum_start;
481 ifq_set_maxlen(&ifp->if_snd, ifqmaxlen);
482 #if 0 /* XXX swildner: see c3d4131842e47b168d93a0650d58d425ebeef789 */
483 ifq_set_ready(&ifp->if_snd);
487 ic->ic_name = device_get_nameunit(sc->sc_dev);
488 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
490 /* set device capabilities */
492 IEEE80211_C_STA /* station mode supported */
493 | IEEE80211_C_IBSS /* IBSS mode supported */
494 | IEEE80211_C_MONITOR /* monitor mode supported */
495 | IEEE80211_C_HOSTAP /* HostAp mode supported */
496 | IEEE80211_C_TXPMGT /* tx power management */
497 | IEEE80211_C_SHPREAMBLE /* short preamble supported */
498 | IEEE80211_C_SHSLOT /* short slot time supported */
499 | IEEE80211_C_BGSCAN /* bg scanning supported */
500 | IEEE80211_C_WPA /* 802.11i */
504 setbit(&bands, IEEE80211_MODE_11B);
505 setbit(&bands, IEEE80211_MODE_11G);
506 if (sc->rf_rev == RT2573_RF_5225 || sc->rf_rev == RT2573_RF_5226)
507 setbit(&bands, IEEE80211_MODE_11A);
508 ieee80211_init_channels(ic, NULL, &bands);
510 ieee80211_ifattach(ic, sc->sc_bssid);
511 ic->ic_update_promisc = rum_update_promisc;
512 ic->ic_raw_xmit = rum_raw_xmit;
513 ic->ic_scan_start = rum_scan_start;
514 ic->ic_scan_end = rum_scan_end;
515 ic->ic_set_channel = rum_set_channel;
517 ic->ic_vap_create = rum_vap_create;
518 ic->ic_vap_delete = rum_vap_delete;
519 ic->ic_update_mcast = rum_update_mcast;
521 ieee80211_radiotap_attach(ic,
522 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap),
523 RT2573_TX_RADIOTAP_PRESENT,
524 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
525 RT2573_RX_RADIOTAP_PRESENT);
528 ieee80211_announce(ic);
530 wlan_serialize_exit();
534 wlan_serialize_exit();
536 return (ENXIO); /* failure */
540 rum_detach(device_t self)
542 struct rum_softc *sc = device_get_softc(self);
543 struct ifnet *ifp = sc->sc_ifp;
544 struct ieee80211com *ic;
546 wlan_serialize_enter();
547 /* Prevent further ioctls */
552 /* stop all USB transfers */
553 usbd_transfer_unsetup(sc->sc_xfer, RUM_N_TRANSFER);
555 /* free TX list, if any */
557 rum_unsetup_tx_list(sc);
562 ieee80211_ifdetach(ic);
565 lockuninit(&sc->sc_lock);
566 wlan_serialize_exit();
571 rum_do_request(struct rum_softc *sc,
572 struct usb_device_request *req, void *data)
578 err = usbd_do_request_flags(sc->sc_udev, &sc->sc_lock,
579 req, data, 0, NULL, 250 /* ms */);
583 DPRINTFN(1, "Control request failed, %s (retrying)\n",
585 if (rum_pause(sc, hz / 100))
591 static struct ieee80211vap *
592 rum_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
593 enum ieee80211_opmode opmode, int flags,
594 const uint8_t bssid[IEEE80211_ADDR_LEN],
595 const uint8_t mac[IEEE80211_ADDR_LEN])
597 struct rum_softc *sc = ic->ic_softc;
599 struct ieee80211vap *vap;
601 if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */
603 rvp = (struct rum_vap *) kmalloc(sizeof(struct rum_vap),
604 M_80211_VAP, M_INTWAIT | M_ZERO);
608 /* enable s/w bmiss handling for sta mode */
610 if (ieee80211_vap_setup(ic, vap, name, unit, opmode,
611 flags | IEEE80211_CLONE_NOBEACONS, bssid, mac) != 0) {
613 kfree(rvp, M_80211_VAP);
617 /* override state transition machine */
618 rvp->newstate = vap->iv_newstate;
619 vap->iv_newstate = rum_newstate;
621 usb_callout_init_mtx(&rvp->ratectl_ch, &sc->sc_lock, 0);
622 TASK_INIT(&rvp->ratectl_task, 0, rum_ratectl_task, rvp);
623 ieee80211_ratectl_init(vap);
624 ieee80211_ratectl_setinterval(vap, 1000 /* 1 sec */);
626 ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status);
627 ic->ic_opmode = opmode;
632 rum_vap_delete(struct ieee80211vap *vap)
634 struct rum_vap *rvp = RUM_VAP(vap);
635 struct ieee80211com *ic = vap->iv_ic;
637 usb_callout_drain(&rvp->ratectl_ch);
638 ieee80211_draintask(ic, &rvp->ratectl_task);
639 ieee80211_ratectl_deinit(vap);
640 ieee80211_vap_detach(vap);
641 kfree(rvp, M_80211_VAP);
645 rum_tx_free(struct rum_tx_data *data, int txerr)
647 struct rum_softc *sc = data->sc;
649 if (data->m != NULL) {
650 if (data->m->m_flags & M_TXCB)
651 ieee80211_process_callback(data->ni, data->m,
652 txerr ? ETIMEDOUT : 0);
656 ieee80211_free_node(data->ni);
659 STAILQ_INSERT_TAIL(&sc->tx_free, data, next);
664 rum_setup_tx_list(struct rum_softc *sc)
666 struct rum_tx_data *data;
670 STAILQ_INIT(&sc->tx_q);
671 STAILQ_INIT(&sc->tx_free);
673 for (i = 0; i < RUM_TX_LIST_COUNT; i++) {
674 data = &sc->tx_data[i];
677 STAILQ_INSERT_TAIL(&sc->tx_free, data, next);
683 rum_unsetup_tx_list(struct rum_softc *sc)
685 struct rum_tx_data *data;
688 /* make sure any subsequent use of the queues will fail */
690 STAILQ_INIT(&sc->tx_q);
691 STAILQ_INIT(&sc->tx_free);
693 /* free up all node references and mbufs */
694 for (i = 0; i < RUM_TX_LIST_COUNT; i++) {
695 data = &sc->tx_data[i];
697 if (data->m != NULL) {
701 if (data->ni != NULL) {
702 ieee80211_free_node(data->ni);
709 rum_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
711 struct rum_vap *rvp = RUM_VAP(vap);
712 struct ieee80211com *ic = vap->iv_ic;
713 struct rum_softc *sc = ic->ic_softc;
714 const struct ieee80211_txparam *tp;
715 enum ieee80211_state ostate;
716 struct ieee80211_node *ni;
719 ostate = vap->iv_state;
720 DPRINTF("%s -> %s\n",
721 ieee80211_state_name[ostate],
722 ieee80211_state_name[nstate]);
724 IEEE80211_UNLOCK(ic);
726 usb_callout_stop(&rvp->ratectl_ch);
729 case IEEE80211_S_INIT:
730 if (ostate == IEEE80211_S_RUN) {
731 /* abort TSF synchronization */
732 tmp = rum_read(sc, RT2573_TXRX_CSR9);
733 rum_write(sc, RT2573_TXRX_CSR9, tmp & ~0x00ffffff);
737 case IEEE80211_S_RUN:
738 ni = ieee80211_ref_node(vap->iv_bss);
740 if (vap->iv_opmode != IEEE80211_M_MONITOR) {
741 if (ic->ic_bsschan == IEEE80211_CHAN_ANYC) {
744 ieee80211_free_node(ni);
747 rum_update_slot(ic->ic_ifp);
749 rum_set_txpreamble(sc);
750 rum_set_basicrates(sc);
751 IEEE80211_ADDR_COPY(sc->sc_bssid, ni->ni_bssid);
752 rum_set_bssid(sc, sc->sc_bssid);
755 if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
756 vap->iv_opmode == IEEE80211_M_IBSS)
757 rum_prepare_beacon(sc, vap);
759 if (vap->iv_opmode != IEEE80211_M_MONITOR)
760 rum_enable_tsf_sync(sc);
764 /* enable automatic rate adaptation */
765 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
766 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE)
767 rum_ratectl_start(sc, ni);
768 ieee80211_free_node(ni);
775 return (rvp->newstate(vap, nstate, arg));
779 rum_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
781 struct rum_softc *sc = usbd_xfer_softc(xfer);
782 struct ifnet *ifp = sc->sc_ifp;
783 struct ieee80211vap *vap;
784 struct rum_tx_data *data;
786 struct usb_page_cache *pc;
790 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL);
792 switch (USB_GET_STATE(xfer)) {
793 case USB_ST_TRANSFERRED:
794 DPRINTFN(11, "transfer complete, %d bytes\n", actlen);
797 data = usbd_xfer_get_priv(xfer);
798 rum_tx_free(data, 0);
799 usbd_xfer_set_priv(xfer, NULL);
801 IFNET_STAT_INC(ifp, opackets, 1);
802 ifq_clr_oactive(&ifp->if_snd);
807 data = STAILQ_FIRST(&sc->tx_q);
809 STAILQ_REMOVE_HEAD(&sc->tx_q, next);
812 if (m->m_pkthdr.len > (int)(MCLBYTES + RT2573_TX_DESC_SIZE)) {
813 DPRINTFN(0, "data overflow, %u bytes\n",
815 m->m_pkthdr.len = (MCLBYTES + RT2573_TX_DESC_SIZE);
817 pc = usbd_xfer_get_frame(xfer, 0);
818 usbd_copy_in(pc, 0, &data->desc, RT2573_TX_DESC_SIZE);
819 usbd_m_copy_in(pc, RT2573_TX_DESC_SIZE, m, 0,
822 vap = data->ni->ni_vap;
823 if (ieee80211_radiotap_active_vap(vap)) {
824 struct rum_tx_radiotap_header *tap = &sc->sc_txtap;
827 tap->wt_rate = data->rate;
828 tap->wt_antenna = sc->tx_ant;
830 ieee80211_radiotap_tx(vap, m);
833 /* align end on a 4-bytes boundary */
834 len = (RT2573_TX_DESC_SIZE + m->m_pkthdr.len + 3) & ~3;
838 DPRINTFN(11, "sending frame len=%u xferlen=%u\n",
839 m->m_pkthdr.len, len);
841 usbd_xfer_set_frame_len(xfer, 0, len);
842 usbd_xfer_set_priv(xfer, data);
844 usbd_transfer_submit(xfer);
847 rum_start(ifp, NULL);
852 DPRINTFN(11, "transfer error, %s\n",
855 IFNET_STAT_INC(ifp, oerrors, 1);
856 data = usbd_xfer_get_priv(xfer);
858 rum_tx_free(data, error);
859 usbd_xfer_set_priv(xfer, NULL);
862 if (error != USB_ERR_CANCELLED) {
863 if (error == USB_ERR_TIMEOUT)
864 device_printf(sc->sc_dev, "device timeout\n");
867 * Try to clear stall first, also if other
868 * errors occur, hence clearing stall
869 * introduces a 50 ms delay:
871 usbd_xfer_set_stall(xfer);
879 rum_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
881 struct rum_softc *sc = usbd_xfer_softc(xfer);
882 struct ifnet *ifp = sc->sc_ifp;
883 struct ieee80211com *ic = ifp->if_l2com;
884 struct ieee80211_node *ni;
885 struct mbuf *m = NULL;
886 struct usb_page_cache *pc;
891 usbd_xfer_status(xfer, &len, NULL, NULL, NULL);
893 switch (USB_GET_STATE(xfer)) {
894 case USB_ST_TRANSFERRED:
896 DPRINTFN(15, "rx done, actlen=%d\n", len);
898 if (len < (int)(RT2573_RX_DESC_SIZE + IEEE80211_MIN_LEN)) {
899 DPRINTF("%s: xfer too short %d\n",
900 device_get_nameunit(sc->sc_dev), len);
901 IFNET_STAT_INC(ifp, ierrors, 1);
905 len -= RT2573_RX_DESC_SIZE;
906 pc = usbd_xfer_get_frame(xfer, 0);
907 usbd_copy_out(pc, 0, &sc->sc_rx_desc, RT2573_RX_DESC_SIZE);
909 rssi = rum_get_rssi(sc, sc->sc_rx_desc.rssi);
910 flags = le32toh(sc->sc_rx_desc.flags);
911 if (flags & RT2573_RX_CRC_ERROR) {
913 * This should not happen since we did not
914 * request to receive those frames when we
915 * filled RUM_TXRX_CSR2:
917 DPRINTFN(5, "PHY or CRC error\n");
918 IFNET_STAT_INC(ifp, ierrors, 1);
922 m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
924 DPRINTF("could not allocate mbuf\n");
925 IFNET_STAT_INC(ifp, ierrors, 1);
928 usbd_copy_out(pc, RT2573_RX_DESC_SIZE,
929 mtod(m, uint8_t *), len);
932 m->m_pkthdr.rcvif = ifp;
933 m->m_pkthdr.len = m->m_len = (flags >> 16) & 0xfff;
935 if (ieee80211_radiotap_active(ic)) {
936 struct rum_rx_radiotap_header *tap = &sc->sc_rxtap;
940 tap->wr_rate = ieee80211_plcp2rate(sc->sc_rx_desc.rate,
941 (flags & RT2573_RX_OFDM) ?
942 IEEE80211_T_OFDM : IEEE80211_T_CCK);
943 tap->wr_antsignal = RT2573_NOISE_FLOOR + rssi;
944 tap->wr_antnoise = RT2573_NOISE_FLOOR;
945 tap->wr_antenna = sc->rx_ant;
950 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
951 usbd_transfer_submit(xfer);
954 * At the end of a USB callback it is always safe to unlock
955 * the private mutex of a device! That is why we do the
956 * "ieee80211_input" here, and not some lines up!
960 ni = ieee80211_find_rxnode(ic,
961 mtod(m, struct ieee80211_frame_min *));
963 (void) ieee80211_input(ni, m, rssi,
965 ieee80211_free_node(ni);
967 (void) ieee80211_input_all(ic, m, rssi,
970 if (!ifq_is_oactive(&ifp->if_snd) &&
971 !ifq_is_empty(&ifp->if_snd))
972 rum_start(ifp, NULL);
977 if (error != USB_ERR_CANCELLED) {
978 /* try to clear stall first */
979 usbd_xfer_set_stall(xfer);
987 rum_plcp_signal(int rate)
990 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
998 case 108: return 0xc;
1000 /* CCK rates (NB: not IEEE std, device-specific) */
1003 case 11: return 0x2;
1004 case 22: return 0x3;
1006 return 0xff; /* XXX unsupported/unknown rate */
1010 rum_setup_tx_desc(struct rum_softc *sc, struct rum_tx_desc *desc,
1011 uint32_t flags, uint16_t xflags, int len, int rate)
1013 struct ifnet *ifp = sc->sc_ifp;
1014 struct ieee80211com *ic = ifp->if_l2com;
1015 uint16_t plcp_length;
1018 desc->flags = htole32(flags);
1019 desc->flags |= htole32(RT2573_TX_VALID);
1020 desc->flags |= htole32(len << 16);
1022 desc->xflags = htole16(xflags);
1024 desc->wme = htole16(RT2573_QID(0) | RT2573_AIFSN(2) |
1025 RT2573_LOGCWMIN(4) | RT2573_LOGCWMAX(10));
1027 /* setup PLCP fields */
1028 desc->plcp_signal = rum_plcp_signal(rate);
1029 desc->plcp_service = 4;
1031 len += IEEE80211_CRC_LEN;
1032 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) {
1033 desc->flags |= htole32(RT2573_TX_OFDM);
1035 plcp_length = len & 0xfff;
1036 desc->plcp_length_hi = plcp_length >> 6;
1037 desc->plcp_length_lo = plcp_length & 0x3f;
1040 rate = 2; /* avoid division by zero */
1041 plcp_length = (16 * len + rate - 1) / rate;
1043 remainder = (16 * len) % 22;
1044 if (remainder != 0 && remainder < 7)
1045 desc->plcp_service |= RT2573_PLCP_LENGEXT;
1047 desc->plcp_length_hi = plcp_length >> 8;
1048 desc->plcp_length_lo = plcp_length & 0xff;
1050 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
1051 desc->plcp_signal |= 0x08;
1056 rum_sendprot(struct rum_softc *sc,
1057 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate)
1059 struct ieee80211com *ic = ni->ni_ic;
1060 const struct ieee80211_frame *wh;
1061 struct rum_tx_data *data;
1063 int protrate, ackrate, pktlen, flags, isshort;
1066 RUM_LOCK_ASSERT(sc, MA_OWNED);
1067 KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY,
1068 ("protection %d", prot));
1070 wh = mtod(m, const struct ieee80211_frame *);
1071 pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN;
1073 protrate = ieee80211_ctl_rate(ic->ic_rt, rate);
1074 ackrate = ieee80211_ack_rate(ic->ic_rt, rate);
1076 isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0;
1077 dur = ieee80211_compute_duration(ic->ic_rt, pktlen, rate, isshort)
1078 + ieee80211_ack_duration(ic->ic_rt, rate, isshort);
1079 flags = RT2573_TX_MORE_FRAG;
1080 if (prot == IEEE80211_PROT_RTSCTS) {
1081 /* NB: CTS is the same size as an ACK */
1082 dur += ieee80211_ack_duration(ic->ic_rt, rate, isshort);
1083 flags |= RT2573_TX_NEED_ACK;
1084 mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur);
1086 mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur);
1088 if (mprot == NULL) {
1089 /* XXX stat + msg */
1092 data = STAILQ_FIRST(&sc->tx_free);
1093 STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1097 data->ni = ieee80211_ref_node(ni);
1098 data->rate = protrate;
1099 rum_setup_tx_desc(sc, &data->desc, flags, 0, mprot->m_pkthdr.len, protrate);
1101 STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1102 usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1108 rum_tx_mgt(struct rum_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
1110 struct ieee80211vap *vap = ni->ni_vap;
1111 struct ifnet *ifp = sc->sc_ifp;
1112 struct ieee80211com *ic = ifp->if_l2com;
1113 struct rum_tx_data *data;
1114 struct ieee80211_frame *wh;
1115 const struct ieee80211_txparam *tp;
1116 struct ieee80211_key *k;
1120 RUM_LOCK_ASSERT(sc, MA_OWNED);
1122 data = STAILQ_FIRST(&sc->tx_free);
1123 STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1126 wh = mtod(m0, struct ieee80211_frame *);
1127 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
1128 k = ieee80211_crypto_encap(ni, m0);
1133 wh = mtod(m0, struct ieee80211_frame *);
1136 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
1138 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1139 flags |= RT2573_TX_NEED_ACK;
1141 dur = ieee80211_ack_duration(ic->ic_rt, tp->mgmtrate,
1142 ic->ic_flags & IEEE80211_F_SHPREAMBLE);
1143 *(uint16_t *)wh->i_dur = htole16(dur);
1145 /* tell hardware to add timestamp for probe responses */
1147 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
1148 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP))
1149 flags |= RT2573_TX_TIMESTAMP;
1154 data->rate = tp->mgmtrate;
1156 rum_setup_tx_desc(sc, &data->desc, flags, 0, m0->m_pkthdr.len, tp->mgmtrate);
1158 DPRINTFN(10, "sending mgt frame len=%d rate=%d\n",
1159 m0->m_pkthdr.len + (int)RT2573_TX_DESC_SIZE, tp->mgmtrate);
1161 STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1162 usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1168 rum_tx_raw(struct rum_softc *sc, struct mbuf *m0, struct ieee80211_node *ni,
1169 const struct ieee80211_bpf_params *params)
1171 struct ieee80211com *ic = ni->ni_ic;
1172 struct rum_tx_data *data;
1176 RUM_LOCK_ASSERT(sc, MA_OWNED);
1177 KASSERT(params != NULL, ("no raw xmit params"));
1179 rate = params->ibp_rate0;
1180 if (!ieee80211_isratevalid(ic->ic_rt, rate)) {
1185 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0)
1186 flags |= RT2573_TX_NEED_ACK;
1187 if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) {
1188 error = rum_sendprot(sc, m0, ni,
1189 params->ibp_flags & IEEE80211_BPF_RTS ?
1190 IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY,
1192 if (error || sc->tx_nfree == 0) {
1196 flags |= RT2573_TX_LONG_RETRY | RT2573_TX_IFS_SIFS;
1199 data = STAILQ_FIRST(&sc->tx_free);
1200 STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1207 /* XXX need to setup descriptor ourself */
1208 rum_setup_tx_desc(sc, &data->desc, flags, 0, m0->m_pkthdr.len, rate);
1210 DPRINTFN(10, "sending raw frame len=%u rate=%u\n",
1211 m0->m_pkthdr.len, rate);
1213 STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1214 usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1220 rum_tx_data(struct rum_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
1222 struct ieee80211vap *vap = ni->ni_vap;
1223 struct ifnet *ifp = sc->sc_ifp;
1224 struct ieee80211com *ic = ifp->if_l2com;
1225 struct rum_tx_data *data;
1226 struct ieee80211_frame *wh;
1227 const struct ieee80211_txparam *tp;
1228 struct ieee80211_key *k;
1233 RUM_LOCK_ASSERT(sc, MA_OWNED);
1235 wh = mtod(m0, struct ieee80211_frame *);
1237 tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)];
1238 if (IEEE80211_IS_MULTICAST(wh->i_addr1))
1239 rate = tp->mcastrate;
1240 else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE)
1241 rate = tp->ucastrate;
1243 rate = ni->ni_txrate;
1245 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
1246 k = ieee80211_crypto_encap(ni, m0);
1252 /* packet header may have moved, reset our local pointer */
1253 wh = mtod(m0, struct ieee80211_frame *);
1256 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1257 int prot = IEEE80211_PROT_NONE;
1258 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold)
1259 prot = IEEE80211_PROT_RTSCTS;
1260 else if ((ic->ic_flags & IEEE80211_F_USEPROT) &&
1261 ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM)
1262 prot = ic->ic_protmode;
1263 if (prot != IEEE80211_PROT_NONE) {
1264 error = rum_sendprot(sc, m0, ni, prot, rate);
1265 if (error || sc->tx_nfree == 0) {
1269 flags |= RT2573_TX_LONG_RETRY | RT2573_TX_IFS_SIFS;
1273 data = STAILQ_FIRST(&sc->tx_free);
1274 STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1281 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1282 flags |= RT2573_TX_NEED_ACK;
1283 flags |= RT2573_TX_MORE_FRAG;
1285 dur = ieee80211_ack_duration(ic->ic_rt, rate,
1286 ic->ic_flags & IEEE80211_F_SHPREAMBLE);
1287 *(uint16_t *)wh->i_dur = htole16(dur);
1290 rum_setup_tx_desc(sc, &data->desc, flags, 0, m0->m_pkthdr.len, rate);
1292 DPRINTFN(10, "sending frame len=%d rate=%d\n",
1293 m0->m_pkthdr.len + (int)RT2573_TX_DESC_SIZE, rate);
1295 STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1296 usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1302 rum_start(struct ifnet *ifp, struct ifaltq_subque *ifsq)
1304 struct rum_softc *sc = ifp->if_softc;
1305 struct ieee80211_node *ni;
1309 if ((ifp->if_flags & IFF_RUNNING) == 0) {
1314 m = ifq_dequeue(&ifp->if_snd);
1317 if (sc->tx_nfree < RUM_TX_MINFREE) {
1318 ifq_prepend(&ifp->if_snd, m);
1319 ifq_set_oactive(&ifp->if_snd);
1322 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif;
1323 if (rum_tx_data(sc, m, ni) != 0) {
1324 ieee80211_free_node(ni);
1325 IFNET_STAT_INC(ifp, oerrors, 1);
1333 rum_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data, struct ucred *ucred)
1335 struct ieee80211com *ic = ifp->if_l2com;
1336 struct rum_softc *sc = ic->ic_softc;
1337 struct ifreq *ifr = (struct ifreq *) data;
1342 error = sc->sc_detached ? ENXIO : 0;
1350 if (ifp->if_flags & IFF_UP) {
1351 if ((ifp->if_flags & IFF_RUNNING) == 0) {
1352 rum_init_locked(sc);
1357 if (ifp->if_flags & IFF_RUNNING)
1362 ieee80211_start_all(ic);
1365 error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd);
1368 error = ether_ioctl(ifp, cmd, data);
1378 rum_eeprom_read(struct rum_softc *sc, uint16_t addr, void *buf, int len)
1380 struct usb_device_request req;
1383 req.bmRequestType = UT_READ_VENDOR_DEVICE;
1384 req.bRequest = RT2573_READ_EEPROM;
1385 USETW(req.wValue, 0);
1386 USETW(req.wIndex, addr);
1387 USETW(req.wLength, len);
1389 error = rum_do_request(sc, &req, buf);
1391 device_printf(sc->sc_dev, "could not read EEPROM: %s\n",
1392 usbd_errstr(error));
1397 rum_read(struct rum_softc *sc, uint16_t reg)
1401 rum_read_multi(sc, reg, &val, sizeof val);
1403 return le32toh(val);
1407 rum_read_multi(struct rum_softc *sc, uint16_t reg, void *buf, int len)
1409 struct usb_device_request req;
1412 req.bmRequestType = UT_READ_VENDOR_DEVICE;
1413 req.bRequest = RT2573_READ_MULTI_MAC;
1414 USETW(req.wValue, 0);
1415 USETW(req.wIndex, reg);
1416 USETW(req.wLength, len);
1418 error = rum_do_request(sc, &req, buf);
1420 device_printf(sc->sc_dev,
1421 "could not multi read MAC register: %s\n",
1422 usbd_errstr(error));
1427 rum_write(struct rum_softc *sc, uint16_t reg, uint32_t val)
1429 uint32_t tmp = htole32(val);
1431 return (rum_write_multi(sc, reg, &tmp, sizeof tmp));
1435 rum_write_multi(struct rum_softc *sc, uint16_t reg, void *buf, size_t len)
1437 struct usb_device_request req;
1441 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
1442 req.bRequest = RT2573_WRITE_MULTI_MAC;
1443 USETW(req.wValue, 0);
1445 /* write at most 64 bytes at a time */
1446 for (offset = 0; offset < len; offset += 64) {
1447 USETW(req.wIndex, reg + offset);
1448 USETW(req.wLength, MIN(len - offset, 64));
1450 error = rum_do_request(sc, &req, (char *)buf + offset);
1452 device_printf(sc->sc_dev,
1453 "could not multi write MAC register: %s\n",
1454 usbd_errstr(error));
1459 return (USB_ERR_NORMAL_COMPLETION);
1463 rum_bbp_write(struct rum_softc *sc, uint8_t reg, uint8_t val)
1468 DPRINTFN(2, "reg=0x%08x\n", reg);
1470 for (ntries = 0; ntries < 100; ntries++) {
1471 if (!(rum_read(sc, RT2573_PHY_CSR3) & RT2573_BBP_BUSY))
1473 if (rum_pause(sc, hz / 100))
1476 if (ntries == 100) {
1477 device_printf(sc->sc_dev, "could not write to BBP\n");
1481 tmp = RT2573_BBP_BUSY | (reg & 0x7f) << 8 | val;
1482 rum_write(sc, RT2573_PHY_CSR3, tmp);
1486 rum_bbp_read(struct rum_softc *sc, uint8_t reg)
1491 DPRINTFN(2, "reg=0x%08x\n", reg);
1493 for (ntries = 0; ntries < 100; ntries++) {
1494 if (!(rum_read(sc, RT2573_PHY_CSR3) & RT2573_BBP_BUSY))
1496 if (rum_pause(sc, hz / 100))
1499 if (ntries == 100) {
1500 device_printf(sc->sc_dev, "could not read BBP\n");
1504 val = RT2573_BBP_BUSY | RT2573_BBP_READ | reg << 8;
1505 rum_write(sc, RT2573_PHY_CSR3, val);
1507 for (ntries = 0; ntries < 100; ntries++) {
1508 val = rum_read(sc, RT2573_PHY_CSR3);
1509 if (!(val & RT2573_BBP_BUSY))
1511 if (rum_pause(sc, hz / 100))
1515 device_printf(sc->sc_dev, "could not read BBP\n");
1520 rum_rf_write(struct rum_softc *sc, uint8_t reg, uint32_t val)
1525 for (ntries = 0; ntries < 100; ntries++) {
1526 if (!(rum_read(sc, RT2573_PHY_CSR4) & RT2573_RF_BUSY))
1528 if (rum_pause(sc, hz / 100))
1531 if (ntries == 100) {
1532 device_printf(sc->sc_dev, "could not write to RF\n");
1536 tmp = RT2573_RF_BUSY | RT2573_RF_20BIT | (val & 0xfffff) << 2 |
1538 rum_write(sc, RT2573_PHY_CSR4, tmp);
1540 /* remember last written value in sc */
1541 sc->rf_regs[reg] = val;
1543 DPRINTFN(15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0xfffff);
1547 rum_select_antenna(struct rum_softc *sc)
1549 uint8_t bbp4, bbp77;
1552 bbp4 = rum_bbp_read(sc, 4);
1553 bbp77 = rum_bbp_read(sc, 77);
1557 /* make sure Rx is disabled before switching antenna */
1558 tmp = rum_read(sc, RT2573_TXRX_CSR0);
1559 rum_write(sc, RT2573_TXRX_CSR0, tmp | RT2573_DISABLE_RX);
1561 rum_bbp_write(sc, 4, bbp4);
1562 rum_bbp_write(sc, 77, bbp77);
1564 rum_write(sc, RT2573_TXRX_CSR0, tmp);
1568 * Enable multi-rate retries for frames sent at OFDM rates.
1569 * In 802.11b/g mode, allow fallback to CCK rates.
1572 rum_enable_mrr(struct rum_softc *sc)
1574 struct ifnet *ifp = sc->sc_ifp;
1575 struct ieee80211com *ic = ifp->if_l2com;
1578 tmp = rum_read(sc, RT2573_TXRX_CSR4);
1580 tmp &= ~RT2573_MRR_CCK_FALLBACK;
1581 if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan))
1582 tmp |= RT2573_MRR_CCK_FALLBACK;
1583 tmp |= RT2573_MRR_ENABLED;
1585 rum_write(sc, RT2573_TXRX_CSR4, tmp);
1589 rum_set_txpreamble(struct rum_softc *sc)
1591 struct ifnet *ifp = sc->sc_ifp;
1592 struct ieee80211com *ic = ifp->if_l2com;
1595 tmp = rum_read(sc, RT2573_TXRX_CSR4);
1597 tmp &= ~RT2573_SHORT_PREAMBLE;
1598 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
1599 tmp |= RT2573_SHORT_PREAMBLE;
1601 rum_write(sc, RT2573_TXRX_CSR4, tmp);
1605 rum_set_basicrates(struct rum_softc *sc)
1607 struct ifnet *ifp = sc->sc_ifp;
1608 struct ieee80211com *ic = ifp->if_l2com;
1610 /* update basic rate set */
1611 if (ic->ic_curmode == IEEE80211_MODE_11B) {
1612 /* 11b basic rates: 1, 2Mbps */
1613 rum_write(sc, RT2573_TXRX_CSR5, 0x3);
1614 } else if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) {
1615 /* 11a basic rates: 6, 12, 24Mbps */
1616 rum_write(sc, RT2573_TXRX_CSR5, 0x150);
1618 /* 11b/g basic rates: 1, 2, 5.5, 11Mbps */
1619 rum_write(sc, RT2573_TXRX_CSR5, 0xf);
1624 * Reprogram MAC/BBP to switch to a new band. Values taken from the reference
1628 rum_select_band(struct rum_softc *sc, struct ieee80211_channel *c)
1630 uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104;
1633 /* update all BBP registers that depend on the band */
1634 bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c;
1635 bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48;
1636 if (IEEE80211_IS_CHAN_5GHZ(c)) {
1637 bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c;
1638 bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10;
1640 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
1641 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
1642 bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10;
1646 rum_bbp_write(sc, 17, bbp17);
1647 rum_bbp_write(sc, 96, bbp96);
1648 rum_bbp_write(sc, 104, bbp104);
1650 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
1651 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
1652 rum_bbp_write(sc, 75, 0x80);
1653 rum_bbp_write(sc, 86, 0x80);
1654 rum_bbp_write(sc, 88, 0x80);
1657 rum_bbp_write(sc, 35, bbp35);
1658 rum_bbp_write(sc, 97, bbp97);
1659 rum_bbp_write(sc, 98, bbp98);
1661 tmp = rum_read(sc, RT2573_PHY_CSR0);
1662 tmp &= ~(RT2573_PA_PE_2GHZ | RT2573_PA_PE_5GHZ);
1663 if (IEEE80211_IS_CHAN_2GHZ(c))
1664 tmp |= RT2573_PA_PE_2GHZ;
1666 tmp |= RT2573_PA_PE_5GHZ;
1667 rum_write(sc, RT2573_PHY_CSR0, tmp);
1671 rum_set_chan(struct rum_softc *sc, struct ieee80211_channel *c)
1673 struct ifnet *ifp = sc->sc_ifp;
1674 struct ieee80211com *ic = ifp->if_l2com;
1675 const struct rfprog *rfprog;
1676 uint8_t bbp3, bbp94 = RT2573_BBPR94_DEFAULT;
1680 chan = ieee80211_chan2ieee(ic, c);
1681 if (chan == 0 || chan == IEEE80211_CHAN_ANY)
1684 /* select the appropriate RF settings based on what EEPROM says */
1685 rfprog = (sc->rf_rev == RT2573_RF_5225 ||
1686 sc->rf_rev == RT2573_RF_2527) ? rum_rf5225 : rum_rf5226;
1688 /* find the settings for this channel (we know it exists) */
1689 for (i = 0; rfprog[i].chan != chan; i++);
1691 power = sc->txpow[i];
1695 } else if (power > 31) {
1696 bbp94 += power - 31;
1701 * If we are switching from the 2GHz band to the 5GHz band or
1702 * vice-versa, BBP registers need to be reprogrammed.
1704 if (c->ic_flags != ic->ic_curchan->ic_flags) {
1705 rum_select_band(sc, c);
1706 rum_select_antenna(sc);
1710 rum_rf_write(sc, RT2573_RF1, rfprog[i].r1);
1711 rum_rf_write(sc, RT2573_RF2, rfprog[i].r2);
1712 rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7);
1713 rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10);
1715 rum_rf_write(sc, RT2573_RF1, rfprog[i].r1);
1716 rum_rf_write(sc, RT2573_RF2, rfprog[i].r2);
1717 rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7 | 1);
1718 rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10);
1720 rum_rf_write(sc, RT2573_RF1, rfprog[i].r1);
1721 rum_rf_write(sc, RT2573_RF2, rfprog[i].r2);
1722 rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7);
1723 rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10);
1725 rum_pause(sc, hz / 100);
1727 /* enable smart mode for MIMO-capable RFs */
1728 bbp3 = rum_bbp_read(sc, 3);
1730 bbp3 &= ~RT2573_SMART_MODE;
1731 if (sc->rf_rev == RT2573_RF_5225 || sc->rf_rev == RT2573_RF_2527)
1732 bbp3 |= RT2573_SMART_MODE;
1734 rum_bbp_write(sc, 3, bbp3);
1736 if (bbp94 != RT2573_BBPR94_DEFAULT)
1737 rum_bbp_write(sc, 94, bbp94);
1739 /* give the chip some extra time to do the switchover */
1740 rum_pause(sc, hz / 100);
1744 * Enable TSF synchronization and tell h/w to start sending beacons for IBSS
1745 * and HostAP operating modes.
1748 rum_enable_tsf_sync(struct rum_softc *sc)
1750 struct ifnet *ifp = sc->sc_ifp;
1751 struct ieee80211com *ic = ifp->if_l2com;
1752 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
1755 if (vap->iv_opmode != IEEE80211_M_STA) {
1757 * Change default 16ms TBTT adjustment to 8ms.
1758 * Must be done before enabling beacon generation.
1760 rum_write(sc, RT2573_TXRX_CSR10, 1 << 12 | 8);
1763 tmp = rum_read(sc, RT2573_TXRX_CSR9) & 0xff000000;
1765 /* set beacon interval (in 1/16ms unit) */
1766 tmp |= vap->iv_bss->ni_intval * 16;
1768 tmp |= RT2573_TSF_TICKING | RT2573_ENABLE_TBTT;
1769 if (vap->iv_opmode == IEEE80211_M_STA)
1770 tmp |= RT2573_TSF_MODE(1);
1772 tmp |= RT2573_TSF_MODE(2) | RT2573_GENERATE_BEACON;
1774 rum_write(sc, RT2573_TXRX_CSR9, tmp);
1778 rum_enable_tsf(struct rum_softc *sc)
1780 rum_write(sc, RT2573_TXRX_CSR9,
1781 (rum_read(sc, RT2573_TXRX_CSR9) & 0xff000000) |
1782 RT2573_TSF_TICKING | RT2573_TSF_MODE(2));
1786 rum_update_slot(struct ifnet *ifp)
1788 struct ieee80211com *ic = ifp->if_l2com;
1789 struct rum_softc *sc = ic->ic_softc;
1793 slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20;
1795 tmp = rum_read(sc, RT2573_MAC_CSR9);
1796 tmp = (tmp & ~0xff) | slottime;
1797 rum_write(sc, RT2573_MAC_CSR9, tmp);
1799 DPRINTF("setting slot time to %uus\n", slottime);
1803 rum_set_bssid(struct rum_softc *sc, const uint8_t *bssid)
1807 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24;
1808 rum_write(sc, RT2573_MAC_CSR4, tmp);
1810 tmp = bssid[4] | bssid[5] << 8 | RT2573_ONE_BSSID << 16;
1811 rum_write(sc, RT2573_MAC_CSR5, tmp);
1815 rum_set_macaddr(struct rum_softc *sc, const uint8_t *addr)
1819 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24;
1820 rum_write(sc, RT2573_MAC_CSR2, tmp);
1822 tmp = addr[4] | addr[5] << 8 | 0xff << 16;
1823 rum_write(sc, RT2573_MAC_CSR3, tmp);
1827 rum_setpromisc(struct rum_softc *sc)
1829 struct ifnet *ifp = sc->sc_ifp;
1832 tmp = rum_read(sc, RT2573_TXRX_CSR0);
1834 tmp &= ~RT2573_DROP_NOT_TO_ME;
1835 if (!(ifp->if_flags & IFF_PROMISC))
1836 tmp |= RT2573_DROP_NOT_TO_ME;
1838 rum_write(sc, RT2573_TXRX_CSR0, tmp);
1840 DPRINTF("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ?
1841 "entering" : "leaving");
1845 rum_update_promisc(struct ieee80211com *ic)
1847 struct rum_softc *sc = ic->ic_softc;
1849 if ((ic->ic_ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
1858 rum_update_mcast(struct ieee80211com *ic)
1860 static int warning_printed;
1862 if (warning_printed == 0) {
1863 ic_printf(ic, "need to implement %s\n", __func__);
1864 warning_printed = 1;
1872 case RT2573_RF_2527: return "RT2527 (MIMO XR)";
1873 case RT2573_RF_2528: return "RT2528";
1874 case RT2573_RF_5225: return "RT5225 (MIMO XR)";
1875 case RT2573_RF_5226: return "RT5226";
1876 default: return "unknown";
1881 rum_read_eeprom(struct rum_softc *sc)
1888 /* read MAC address */
1889 rum_eeprom_read(sc, RT2573_EEPROM_ADDRESS, sc->sc_bssid, 6);
1891 rum_eeprom_read(sc, RT2573_EEPROM_ANTENNA, &val, 2);
1893 sc->rf_rev = (val >> 11) & 0x1f;
1894 sc->hw_radio = (val >> 10) & 0x1;
1895 sc->rx_ant = (val >> 4) & 0x3;
1896 sc->tx_ant = (val >> 2) & 0x3;
1897 sc->nb_ant = val & 0x3;
1899 DPRINTF("RF revision=%d\n", sc->rf_rev);
1901 rum_eeprom_read(sc, RT2573_EEPROM_CONFIG2, &val, 2);
1903 sc->ext_5ghz_lna = (val >> 6) & 0x1;
1904 sc->ext_2ghz_lna = (val >> 4) & 0x1;
1906 DPRINTF("External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n",
1907 sc->ext_2ghz_lna, sc->ext_5ghz_lna);
1909 rum_eeprom_read(sc, RT2573_EEPROM_RSSI_2GHZ_OFFSET, &val, 2);
1911 if ((val & 0xff) != 0xff)
1912 sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */
1914 /* Only [-10, 10] is valid */
1915 if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10)
1916 sc->rssi_2ghz_corr = 0;
1918 rum_eeprom_read(sc, RT2573_EEPROM_RSSI_5GHZ_OFFSET, &val, 2);
1920 if ((val & 0xff) != 0xff)
1921 sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */
1923 /* Only [-10, 10] is valid */
1924 if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10)
1925 sc->rssi_5ghz_corr = 0;
1927 if (sc->ext_2ghz_lna)
1928 sc->rssi_2ghz_corr -= 14;
1929 if (sc->ext_5ghz_lna)
1930 sc->rssi_5ghz_corr -= 14;
1932 DPRINTF("RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n",
1933 sc->rssi_2ghz_corr, sc->rssi_5ghz_corr);
1935 rum_eeprom_read(sc, RT2573_EEPROM_FREQ_OFFSET, &val, 2);
1937 if ((val & 0xff) != 0xff)
1938 sc->rffreq = val & 0xff;
1940 DPRINTF("RF freq=%d\n", sc->rffreq);
1942 /* read Tx power for all a/b/g channels */
1943 rum_eeprom_read(sc, RT2573_EEPROM_TXPOWER, sc->txpow, 14);
1944 /* XXX default Tx power for 802.11a channels */
1945 memset(sc->txpow + 14, 24, sizeof (sc->txpow) - 14);
1947 for (i = 0; i < 14; i++)
1948 DPRINTF("Channel=%d Tx power=%d\n", i + 1, sc->txpow[i]);
1951 /* read default values for BBP registers */
1952 rum_eeprom_read(sc, RT2573_EEPROM_BBP_BASE, sc->bbp_prom, 2 * 16);
1954 for (i = 0; i < 14; i++) {
1955 if (sc->bbp_prom[i].reg == 0 || sc->bbp_prom[i].reg == 0xff)
1957 DPRINTF("BBP R%d=%02x\n", sc->bbp_prom[i].reg,
1958 sc->bbp_prom[i].val);
1964 rum_bbp_init(struct rum_softc *sc)
1968 /* wait for BBP to be ready */
1969 for (ntries = 0; ntries < 100; ntries++) {
1970 const uint8_t val = rum_bbp_read(sc, 0);
1971 if (val != 0 && val != 0xff)
1973 if (rum_pause(sc, hz / 100))
1976 if (ntries == 100) {
1977 device_printf(sc->sc_dev, "timeout waiting for BBP\n");
1981 /* initialize BBP registers to default values */
1982 for (i = 0; i < N(rum_def_bbp); i++)
1983 rum_bbp_write(sc, rum_def_bbp[i].reg, rum_def_bbp[i].val);
1985 /* write vendor-specific BBP values (from EEPROM) */
1986 for (i = 0; i < 16; i++) {
1987 if (sc->bbp_prom[i].reg == 0 || sc->bbp_prom[i].reg == 0xff)
1989 rum_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val);
1996 rum_init_locked(struct rum_softc *sc)
1998 struct ifnet *ifp = sc->sc_ifp;
1999 struct ieee80211com *ic = ifp->if_l2com;
2004 RUM_LOCK_ASSERT(sc, MA_OWNED);
2008 /* initialize MAC registers to default values */
2009 for (i = 0; i < N(rum_def_mac); i++)
2010 rum_write(sc, rum_def_mac[i].reg, rum_def_mac[i].val);
2012 /* set host ready */
2013 rum_write(sc, RT2573_MAC_CSR1, 3);
2014 rum_write(sc, RT2573_MAC_CSR1, 0);
2016 /* wait for BBP/RF to wakeup */
2017 for (ntries = 0; ntries < 100; ntries++) {
2018 if (rum_read(sc, RT2573_MAC_CSR12) & 8)
2020 rum_write(sc, RT2573_MAC_CSR12, 4); /* force wakeup */
2021 if (rum_pause(sc, hz / 100))
2024 if (ntries == 100) {
2025 device_printf(sc->sc_dev,
2026 "timeout waiting for BBP/RF to wakeup\n");
2030 if ((error = rum_bbp_init(sc)) != 0)
2033 /* select default channel */
2034 rum_select_band(sc, ic->ic_curchan);
2035 rum_select_antenna(sc);
2036 rum_set_chan(sc, ic->ic_curchan);
2038 /* clear STA registers */
2039 rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof sc->sta);
2041 rum_set_macaddr(sc, IF_LLADDR(ifp));
2043 /* initialize ASIC */
2044 rum_write(sc, RT2573_MAC_CSR1, 4);
2047 * Allocate Tx and Rx xfer queues.
2049 rum_setup_tx_list(sc);
2051 /* update Rx filter */
2052 tmp = rum_read(sc, RT2573_TXRX_CSR0) & 0xffff;
2054 tmp |= RT2573_DROP_PHY_ERROR | RT2573_DROP_CRC_ERROR;
2055 if (ic->ic_opmode != IEEE80211_M_MONITOR) {
2056 tmp |= RT2573_DROP_CTL | RT2573_DROP_VER_ERROR |
2058 if (ic->ic_opmode != IEEE80211_M_HOSTAP)
2059 tmp |= RT2573_DROP_TODS;
2060 if (!(ifp->if_flags & IFF_PROMISC))
2061 tmp |= RT2573_DROP_NOT_TO_ME;
2063 rum_write(sc, RT2573_TXRX_CSR0, tmp);
2065 ifq_clr_oactive(&ifp->if_snd);
2066 ifp->if_flags |= IFF_RUNNING;
2067 usbd_xfer_set_stall(sc->sc_xfer[RUM_BULK_WR]);
2068 usbd_transfer_start(sc->sc_xfer[RUM_BULK_RD]);
2076 rum_init(void *priv)
2078 struct rum_softc *sc = priv;
2079 struct ifnet *ifp = sc->sc_ifp;
2080 struct ieee80211com *ic = ifp->if_l2com;
2083 rum_init_locked(sc);
2086 if (ifp->if_flags & IFF_RUNNING)
2087 ieee80211_start_all(ic); /* start all vap's */
2091 rum_stop(struct rum_softc *sc)
2093 struct ifnet *ifp = sc->sc_ifp;
2096 RUM_LOCK_ASSERT(sc, MA_OWNED);
2098 ifp->if_flags &= ~IFF_RUNNING;
2099 ifq_clr_oactive(&ifp->if_snd);
2104 * Drain the USB transfers, if not already drained:
2106 usbd_transfer_drain(sc->sc_xfer[RUM_BULK_WR]);
2107 usbd_transfer_drain(sc->sc_xfer[RUM_BULK_RD]);
2110 rum_unsetup_tx_list(sc);
2113 tmp = rum_read(sc, RT2573_TXRX_CSR0);
2114 rum_write(sc, RT2573_TXRX_CSR0, tmp | RT2573_DISABLE_RX);
2117 rum_write(sc, RT2573_MAC_CSR1, 3);
2118 rum_write(sc, RT2573_MAC_CSR1, 0);
2122 rum_load_microcode(struct rum_softc *sc, const uint8_t *ucode, size_t size)
2124 struct usb_device_request req;
2125 uint16_t reg = RT2573_MCU_CODE_BASE;
2128 /* copy firmware image into NIC */
2129 for (; size >= 4; reg += 4, ucode += 4, size -= 4) {
2130 err = rum_write(sc, reg, UGETDW(ucode));
2132 /* firmware already loaded ? */
2133 device_printf(sc->sc_dev, "Firmware load "
2134 "failure! (ignored)\n");
2139 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
2140 req.bRequest = RT2573_MCU_CNTL;
2141 USETW(req.wValue, RT2573_MCU_RUN);
2142 USETW(req.wIndex, 0);
2143 USETW(req.wLength, 0);
2145 err = rum_do_request(sc, &req, NULL);
2147 device_printf(sc->sc_dev, "could not run firmware: %s\n",
2151 /* give the chip some time to boot */
2152 rum_pause(sc, hz / 8);
2156 rum_prepare_beacon(struct rum_softc *sc, struct ieee80211vap *vap)
2158 struct ieee80211com *ic = vap->iv_ic;
2159 const struct ieee80211_txparam *tp;
2160 struct rum_tx_desc desc;
2163 if (vap->iv_bss->ni_chan == IEEE80211_CHAN_ANYC)
2165 if (ic->ic_bsschan == IEEE80211_CHAN_ANYC)
2168 m0 = ieee80211_beacon_alloc(vap->iv_bss, &RUM_VAP(vap)->bo);
2172 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_bsschan)];
2173 rum_setup_tx_desc(sc, &desc, RT2573_TX_TIMESTAMP, RT2573_TX_HWSEQ,
2174 m0->m_pkthdr.len, tp->mgmtrate);
2176 /* copy the first 24 bytes of Tx descriptor into NIC memory */
2177 rum_write_multi(sc, RT2573_HW_BEACON_BASE0, (uint8_t *)&desc, 24);
2179 /* copy beacon header and payload into NIC memory */
2180 rum_write_multi(sc, RT2573_HW_BEACON_BASE0 + 24, mtod(m0, uint8_t *),
2187 rum_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
2188 const struct ieee80211_bpf_params *params)
2190 struct ifnet *ifp = ni->ni_ic->ic_ifp;
2191 struct rum_softc *sc = ni->ni_ic->ic_softc;
2194 /* prevent management frames from being sent if we're not ready */
2195 if (!(ifp->if_flags & IFF_RUNNING)) {
2198 ieee80211_free_node(ni);
2201 if (sc->tx_nfree < RUM_TX_MINFREE) {
2202 ifq_set_oactive(&ifp->if_snd);
2205 ieee80211_free_node(ni);
2209 IFNET_STAT_INC(ifp, opackets, 1);
2211 if (params == NULL) {
2213 * Legacy path; interpret frame contents to decide
2214 * precisely how to send the frame.
2216 if (rum_tx_mgt(sc, m, ni) != 0)
2220 * Caller supplied explicit parameters to use in
2221 * sending the frame.
2223 if (rum_tx_raw(sc, m, ni, params) != 0)
2230 IFNET_STAT_INC(ifp, oerrors, 1);
2232 ieee80211_free_node(ni);
2237 rum_ratectl_start(struct rum_softc *sc, struct ieee80211_node *ni)
2239 struct ieee80211vap *vap = ni->ni_vap;
2240 struct rum_vap *rvp = RUM_VAP(vap);
2242 /* clear statistic registers (STA_CSR0 to STA_CSR5) */
2243 rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof sc->sta);
2245 usb_callout_reset(&rvp->ratectl_ch, hz, rum_ratectl_timeout, rvp);
2249 rum_ratectl_timeout(void *arg)
2251 struct rum_vap *rvp = arg;
2252 struct ieee80211vap *vap = &rvp->vap;
2253 struct ieee80211com *ic = vap->iv_ic;
2255 ieee80211_runtask(ic, &rvp->ratectl_task);
2259 rum_ratectl_task(void *arg, int pending)
2261 struct rum_vap *rvp = arg;
2262 struct ieee80211vap *vap = &rvp->vap;
2263 struct ieee80211com *ic = vap->iv_ic;
2264 struct ifnet *ifp = ic->ic_ifp;
2265 struct rum_softc *sc = ic->ic_softc;
2266 struct ieee80211_node *ni;
2271 /* read and clear statistic registers (STA_CSR0 to STA_CSR10) */
2272 rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof(sc->sta));
2274 ok = (le32toh(sc->sta[4]) & 0xffff) + /* TX no-retry ok count */
2275 (le32toh(sc->sta[4]) >> 16) + /* TX one-retry ok count */
2276 (le32toh(sc->sta[5]) & 0xffff); /* TX more-retry ok count */
2277 fail = (le32toh(sc->sta[5]) >> 16); /* TX retry-fail count */
2279 retrycnt = (le32toh(sc->sta[4]) >> 16) +
2280 (le32toh(sc->sta[5]) & 0xffff) + fail;
2282 ni = ieee80211_ref_node(vap->iv_bss);
2283 ieee80211_ratectl_tx_update(vap, ni, &sum, &ok, &retrycnt);
2284 (void) ieee80211_ratectl_rate(ni, NULL, 0);
2285 ieee80211_free_node(ni);
2287 IFNET_STAT_INC(ifp, oerrors, fail); /* count TX retry-fail as Tx errors */
2289 usb_callout_reset(&rvp->ratectl_ch, hz, rum_ratectl_timeout, rvp);
2294 rum_scan_start(struct ieee80211com *ic)
2296 struct ifnet *ifp = ic->ic_ifp;
2297 struct rum_softc *sc = ic->ic_softc;
2301 /* abort TSF synchronization */
2302 tmp = rum_read(sc, RT2573_TXRX_CSR9);
2303 rum_write(sc, RT2573_TXRX_CSR9, tmp & ~0x00ffffff);
2304 rum_set_bssid(sc, ifp->if_broadcastaddr);
2310 rum_scan_end(struct ieee80211com *ic)
2312 struct rum_softc *sc = ic->ic_softc;
2315 rum_enable_tsf_sync(sc);
2316 rum_set_bssid(sc, sc->sc_bssid);
2322 rum_set_channel(struct ieee80211com *ic)
2324 struct rum_softc *sc = ic->ic_softc;
2327 rum_set_chan(sc, ic->ic_curchan);
2332 rum_get_rssi(struct rum_softc *sc, uint8_t raw)
2334 struct ifnet *ifp = sc->sc_ifp;
2335 struct ieee80211com *ic = ifp->if_l2com;
2338 lna = (raw >> 5) & 0x3;
2345 * NB: Since RSSI is relative to noise floor, -1 is
2346 * adequate for caller to know error happened.
2351 rssi = (2 * agc) - RT2573_NOISE_FLOOR;
2353 if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) {
2354 rssi += sc->rssi_2ghz_corr;
2363 rssi += sc->rssi_5ghz_corr;
2365 if (!sc->ext_5ghz_lna && lna != 1)
2379 rum_pause(struct rum_softc *sc, int timeout)
2381 usb_pause_mtx(&sc->sc_lock, timeout);
2385 static device_method_t rum_methods[] = {
2386 /* Device interface */
2387 DEVMETHOD(device_probe, rum_match),
2388 DEVMETHOD(device_attach, rum_attach),
2389 DEVMETHOD(device_detach, rum_detach),
2393 static driver_t rum_driver = {
2395 .methods = rum_methods,
2396 .size = sizeof(struct rum_softc),
2399 static devclass_t rum_devclass;
2401 DRIVER_MODULE(rum, uhub, rum_driver, rum_devclass, NULL, NULL);
2402 MODULE_DEPEND(rum, wlan, 1, 1, 1);
2403 MODULE_DEPEND(rum, usb, 1, 1, 1);
2404 MODULE_VERSION(rum, 1);