Merge from vendor branch TCPDUMP:
[dragonfly.git] / sys / conf / options
1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
2 # $DragonFly: src/sys/conf/options,v 1.72 2007/09/02 13:27:23 sephe Exp $
3 #
4 #        On the handling of kernel options
5 #
6 # All kernel options should be listed in LINT, with suitable
7 # descriptions.  Negative options (options that make some code not
8 # compile) should be commented out; LINT should compile as much code
9 # as possible.  Try to structure option-using code so that a single
10 # option only switch code on, or only switch code off, to make it
11 # possible to have a full compile-test.  If necessary, you can include
12 # "opt_lint.h" and check for COMPILING_LINT to get maximum code
13 # coverage.
14 #
15 # All new options shall also be listed in either "conf/options" or
16 # "<platform>/conf/options.<platform>".  Options that affect a single
17 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
18 # options that affect multiple files should either go in
19 # "opt_global.h" if this is a kernel-wide option (used just about
20 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
21 # only some files.  Note that the effect of listing only an option
22 # without a header-file-name in conf/options (and cousins) is that the
23 # last convention is followed.
24 #
25 # This handling scheme is not yet fully implemented.
26 #
27 #
28 # Format of this file:
29 # Option name   filename
30 #
31 # If filename is missing, the default is
32 # opt_<name-of-option-in-lower-case>.h
33
34 # Adaptec Array Controller driver options
35 AAC_DEBUG               opt_aac.h       # Debugging levels:
36                                         # 0 - quiet, only emit warnings
37                                         # 1 - noisy, emit major function
38                                         #     points and things done
39                                         # 2 - extremely noisy, emit trace
40                                         #     items in loops, etc.
41
42 # Adaptec aic7xxx SCSI controller options
43 AHC_ALLOW_MEMIO         opt_aic7xxx.h   # Allow PCI devices to use memory
44                                         # mapped I/O
45
46 AHC_TMODE_ENABLE        opt_aic7xxx.h   # Bitmap of units to enable
47                                         # targetmode operations.
48
49 AHC_DUMP_EEPROM         opt_aic7xxx.h   # Dump the contents of our
50                                         # configuration prom.
51
52 AHC_DEBUG               opt_aic7xxx.h   # Compile in Aic7xxx Debugging code.
53
54 AHC_DEBUG_OPTS          opt_aic7xxx.h   # Aic7xxx driver debugging options.
55                                         # See sys/dev/aic7xxx/aic7xxx.h
56
57 AHC_REG_PRETTY_PRINT    opt_aic7xxx.h   # Print register bitfields in debug
58                                         # output.  Adds ~15k to driver.
59
60 # Adaptec aic79xx SCSI controller options
61 AHD_DEBUG               opt_aic79xx.h   # Compile in Aic79xx Debugging code.
62
63 AHD_DEBUG_OPTS          opt_aic79xx.h   # Aic79xx driver debugging options.
64                                         # See sys/dev/aic7xxx/aic79xx.h
65
66 AHD_TMODE_ENABLE        opt_aic79xx.h   # Bitmap of units to enable
67                                         # targetmode operations.
68
69 AHD_REG_PRETTY_PRINT    opt_aic79xx.h   # Print register bitfields in debug
70                                         # output.  Adds ~15k to driver.
71
72 ADW_ALLOW_MEMIO         opt_adw.h       # Allow PCI devices to use memory
73                                         # mapped I/O
74 TWA_DEBUG               opt_twa.h
75 TWA_FLASH_FIRMWARE      opt_twa.h
76
77 #options for ACPI support
78 ACPI_DEBUG              opt_acpi.h
79 ACPI_NO_SEMAPHORES      opt_acpi.h
80 ACPI_QUIRK_VMWARE       opt_acpi.h
81
82 # Miscellaneous options.
83 COMPAT_DF12     opt_compatdf12.h
84 COMPAT_43       opt_compat.h
85 COMPAT_SUNOS    opt_compat.h
86 COMPILING_LINT  opt_lint.h
87 CY_PCI_FASTINTR
88 DDB
89 DDB_TRACE
90 DDB_UNATTENDED  opt_ddb.h
91 GDB_REMOTE_CHAT opt_ddb.h
92 HW_WDOG
93 KTRACE
94 LIBICONV
95 MD_NSECT        opt_md.h
96 MD_ROOT         opt_md.h
97 MD_ROOT_SIZE    opt_md.h
98 NSWAPDEV        opt_swap.h
99 NSWBUF_MIN      opt_swap.h
100 PPS_SYNC        opt_ntp.h
101 QUOTA
102 SUIDDIR         opt_suiddir.h
103 SYSVMSG         opt_sysvipc.h
104 SYSVSEM         opt_sysvipc.h
105 SYSVSHM         opt_sysvipc.h
106 SHMALL          opt_sysvipc.h
107 SHMMAX          opt_sysvipc.h
108 SHMMAXPGS       opt_sysvipc.h
109 SHMMIN          opt_sysvipc.h
110 SHMMNI          opt_sysvipc.h
111 SHMSEG          opt_sysvipc.h
112 SEMMAP          opt_sysvipc.h
113 SEMMNI          opt_sysvipc.h
114 SEMMNS          opt_sysvipc.h
115 SEMMNU          opt_sysvipc.h
116 SEMMSL          opt_sysvipc.h
117 SEMOPM          opt_sysvipc.h
118 SEMUME          opt_sysvipc.h
119 MSGMNB          opt_sysvipc.h
120 MSGMNI          opt_sysvipc.h
121 MSGSEG          opt_sysvipc.h
122 MSGSSZ          opt_sysvipc.h
123 MSGTQL          opt_sysvipc.h
124 UCONSOLE
125 ICMP_BANDLIM
126 VFS_AIO
127 DIRECTIO        opt_directio.h
128
129 # POSIX kernel options
130 P1003_1B                        opt_posix.h
131 _KPOSIX_PRIORITY_SCHEDULING     opt_posix.h
132 _KPOSIX_VERSION                 opt_posix.h
133
134 # Do we want the config file compiled into the kernel?
135 INCLUDE_CONFIG_FILE     opt_config.h
136
137 # Options for static file systems.  These should only be used at config
138 # time, since the corresponding lkms cannot work if there are any static
139 # dependencies.  Unusability is enforced by hiding the defines for the
140 # options in a never-included header.
141 EXT2FS          opt_dontuse.h
142 FDESC           opt_dontuse.h
143 MFS             opt_dontuse.h
144 MSDOSFS         opt_dontuse.h
145 NULLFS          opt_dontuse.h
146 PORTAL          opt_dontuse.h
147 PROCFS          opt_dontuse.h
148 UDF             opt_dontuse.h
149 NTFS            opt_dontuse.h
150
151 # These static filesystems has one slightly bogus static dependency in
152 # sys/platform/.../i386/autoconf.c.  If any of these filesystems are
153 # statically compiled into the kernel, code for mounting them as root
154 # filesystems will be enabled - but look below.  Boot-code is purposely
155 # unavailable for the LKM-based versions.
156 CD9660
157 FFS
158 NFS
159 NWFS
160 USERFS
161
162 # If you are following the conditions in the copyright,
163 # you can enable soft-updates which will speed up a lot of thigs
164 # and make the system safer from crashes at the same time.
165 # otherwise a STUB module will be compiled in.
166 SOFTUPDATES     opt_ffs.h
167
168 # Enable fast hash lookups for large directories on UFS-based filesystems.
169 UFS_DIRHASH     opt_ufs.h
170
171 # The above static dependencies are planned removed, with a
172 # <filesystem>_ROOT option to control if it usable as root.  This list
173 # allows these options to be present in config files already (though
174 # they won't make any difference yet).
175 FFS_ROOT        opt_ffs.h
176 NFS_ROOT        opt_nfsroot.h
177
178 # The union static file system has bogus static dependencies, so it isn't
179 # hidden yet.
180 UNION
181
182 # Options used only in subr_param.c.
183 HZ              opt_param.h
184 MAXFILES        opt_param.h
185 NBUF            opt_param.h
186 NMBCLUSTERS     opt_param.h
187 NMBUFS          opt_param.h
188 NSFBUFS         opt_param.h
189 VM_BCACHE_SIZE_MAX      opt_param.h
190 VM_SWZONE_SIZE_MAX      opt_param.h
191 MAXUSERS
192 DFLDSIZ         opt_param.h
193 MAXDSIZ         opt_param.h
194 MAXSSIZ         opt_param.h
195
196 # Generic SCSI options.
197 CAM_MAX_HIGHPOWER       opt_cam.h
198 CAMDEBUG                opt_cam.h
199 CAM_DEBUG_DELAY         opt_cam.h
200 CAM_DEBUG_BUS           opt_cam.h
201 CAM_DEBUG_TARGET        opt_cam.h
202 CAM_DEBUG_LUN           opt_cam.h
203 CAM_DEBUG_FLAGS         opt_cam.h
204 SCSI_DELAY              opt_scsi.h
205 SCSI_NO_SENSE_STRINGS   opt_scsi.h
206 SCSI_NO_OP_STRINGS      opt_scsi.h
207
208 # Options used only in cam/scsi/scsi_cd.c
209 CHANGER_MIN_BUSY_SECONDS        opt_cd.h
210 CHANGER_MAX_BUSY_SECONDS        opt_cd.h
211
212 # Options used only in cam/scsi/scsi_sa.c.
213 SA_IO_TIMEOUT           opt_sa.h
214 SA_SPACE_TIMEOUT        opt_sa.h
215 SA_REWIND_TIMEOUT       opt_sa.h
216 SA_ERASE_TIMEOUT        opt_sa.h
217 SA_1FM_AT_EOD           opt_sa.h
218
219 # Options used only in cam/scsi/scsi_pt.c
220 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
221
222 # Options used only in cam/scsi/scsi_ses.c
223 SES_ENABLE_PASSTHROUGH  opt_ses.h
224
225 # Options used in dev/sym/ (Symbios SCSI driver).
226 SYM_SETUP_LP_PROBE_MAP  opt_sym.h       #-Low Priority Probe Map (bits)
227                                         # Allows the ncr to take precedence
228                                         # 1 (1<<0) -> 810a, 860
229                                         # 2 (1<<1) -> 825a, 875, 885, 895
230                                         # 4 (1<<2) -> 895a, 896, 1510d 
231 SYM_SETUP_SCSI_DIFF     opt_sym.h       #-HVD support for 825a, 875, 885
232                                         # disabled:0 (default), enabled:1
233 SYM_SETUP_PCI_PARITY    opt_sym.h       #-PCI parity checking
234                                         # disabled:0, enabled:1 (default)
235 SYM_SETUP_MAX_LUN       opt_sym.h       #-Number of LUNs supported
236                                         # default:8, range:[1..64]
237
238 # Options used only in pci/ncr.c
239 SCSI_NCR_DEBUG          opt_ncr.h
240 SCSI_NCR_MAX_SYNC       opt_ncr.h
241 SCSI_NCR_MAX_WIDE       opt_ncr.h
242 SCSI_NCR_MYADDR         opt_ncr.h
243
244 # Options used only in pci/isp_pci.c
245 ISP_TARGET_MODE         opt_isp.h
246
247 # Options used in the 'ata' ATA/ATAPI driver
248 ATA_STATIC_ID           opt_ata.h
249
250 # Net stuff.
251 # altq stuff
252 ALTQ                    opt_global.h
253 ALTQ_CBQ                opt_altq.h
254 ALTQ_RED                opt_altq.h
255 ALTQ_RIO                opt_altq.h
256 ALTQ_HFSC               opt_altq.h
257 ALTQ_PRIQ               opt_altq.h
258 ALTQ_NOPCC              opt_altq.h
259 ALTQ_DEBUG              opt_altq.h
260
261 ACCEPT_FILTER_DATA
262 ACCEPT_FILTER_HTTP
263 BOOTP                   opt_bootp.h
264 BOOTP_COMPAT            opt_bootp.h
265 BOOTP_NFSROOT           opt_bootp.h
266 BOOTP_NFSV3             opt_bootp.h
267 BOOTP_WIRED_TO          opt_bootp.h
268 CARP                    opt_carp.h
269 ETHER_II                opt_ef.h
270 ETHER_8023              opt_ef.h
271 ETHER_8022              opt_ef.h
272 ETHER_SNAP              opt_ef.h
273 MROUTING                opt_mrouting.h
274 PIM                     opt_mrouting.h
275 INET                    opt_inet.h
276 INET6                   opt_inet6.h
277 IPSEC                   opt_ipsec.h
278 IPSEC_ESP               opt_ipsec.h
279 IPSEC_DEBUG             opt_ipsec.h
280 IPSEC_FILTERGIF         opt_ipsec.h
281 FAST_IPSEC              opt_ipsec.h
282 IPDIVERT
283 DUMMYNET                opt_ipdn.h
284 IPFILTER                opt_ipfilter.h
285 IPFILTER_LOG            opt_ipfilter.h
286 IPFILTER_DEFAULT_BLOCK  opt_ipfilter.h
287 IPFIREWALL              opt_ipfw.h
288 IPFIREWALL_VERBOSE      opt_ipfw.h
289 IPFIREWALL_VERBOSE_LIMIT        opt_ipfw.h
290 IPFIREWALL_DEFAULT_TO_ACCEPT    opt_ipfw.h
291 IPFIREWALL_FORWARD              opt_ipfw.h
292 IPV6FIREWALL            opt_ip6fw.h
293 IPV6FIREWALL_VERBOSE    opt_ip6fw.h
294 IPV6FIREWALL_VERBOSE_LIMIT      opt_ip6fw.h
295 IPV6FIREWALL_DEFAULT_TO_ACCEPT  opt_ip6fw.h
296 IPSTEALTH
297 IPX                     opt_ipx.h
298 IPXIP                   opt_ipx.h
299 IPTUNNEL                opt_ipx.h
300 LIBMCHAIN
301 NCP                     opt_ncp.h
302 NETATALK                opt_atalk.h
303 NS                      opt_ns.h
304 PPP_BSDCOMP             opt_ppp.h
305 PPP_DEFLATE             opt_ppp.h
306 PPP_FILTER              opt_ppp.h
307 SLIP_IFF_OPTS           opt_slip.h
308 TCPDEBUG
309 TCP_DROP_SYNFIN         opt_tcp_input.h
310
311 XBONEHACK
312 MBUF_STRESS_TEST        opt_mbuf_stress_test.h
313
314 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
315 # Each netgraph node type can be either be compiled into the kernel
316 # or loaded dynamically. To get the former, include the corresponding
317 # option below. Each type has its own man page, e.g. ng_async(8).
318 NETGRAPH
319 NETGRAPH_ASYNC          opt_netgraph.h
320 NETGRAPH_BPF            opt_netgraph.h
321 NETGRAPH_BRIDGE         opt_netgraph.h
322 NETGRAPH_CISCO          opt_netgraph.h
323 NETGRAPH_ECHO           opt_netgraph.h
324 NETGRAPH_EIFACE         opt_netgraph.h
325 NETGRAPH_ETHER          opt_netgraph.h
326 NETGRAPH_FRAME_RELAY    opt_netgraph.h
327 NETGRAPH_HOLE           opt_netgraph.h
328 NETGRAPH_IFACE          opt_netgraph.h
329 NETGRAPH_KSOCKET        opt_netgraph.h
330 NETGRAPH_LMI            opt_netgraph.h
331 NETGRAPH_L2TP           opt_netgraph.h
332 # MPPC compression requires proprietary files (not included)
333 NETGRAPH_MPPC_COMPRESSION       opt_netgraph.h
334 NETGRAPH_MPPC_ENCRYPTION        opt_netgraph.h
335 NETGRAPH_ONE2MANY       opt_netgraph.h
336 NETGRAPH_PPP            opt_netgraph.h
337 NETGRAPH_PPPOE          opt_netgraph.h
338 NETGRAPH_PPTPGRE        opt_netgraph.h
339 NETGRAPH_RFC1490        opt_netgraph.h
340 NETGRAPH_SOCKET         opt_netgraph.h
341 NETGRAPH_TEE            opt_netgraph.h
342 NETGRAPH_TTY            opt_netgraph.h
343 NETGRAPH_UI             opt_netgraph.h
344 NETGRAPH_VJC            opt_netgraph.h
345
346 # DRM options
347 DRM_DEBUG               opt_drm.h
348 DRM_LINUX               opt_drm.h
349
350 # ATM (HARP version)
351 ATM_CORE                opt_atm.h
352 ATM_IP                  opt_atm.h
353 ATM_SIGPVC              opt_atm.h
354 ATM_SPANS               opt_atm.h
355 ATM_UNI                 opt_atm.h
356
357 # XXX Conflict: # of devices vs network protocol (Native ATM).
358 # This makes "atm.h" unusable.
359 NATM                    opt_natm.h
360
361 # DPT driver debug flags
362 DPT_MEASURE_PERFORMANCE opt_dpt.h
363 DPT_HANDLE_TIMEOUTS     opt_dpt.h
364 DPT_TIMEOUT_FACTOR      opt_dpt.h
365 DPT_LOST_IRQ            opt_dpt.h
366 DPT_RESET_HBA           opt_dpt.h
367
368 # Misc debug flags.  Most of these should probably be replaced with
369 # 'DEBUG', and then let people recompile just the interesting modules
370 # with 'make CC="cc -DDEBUG"'.
371 CLUSTERDEBUG            opt_debug_cluster.h
372 DEBUG_1284              opt_ppb_1284.h
373 VP0_DEBUG               opt_vpo.h
374 LPT_DEBUG               opt_lpt.h
375 PLIP_DEBUG              opt_plip.h
376 LOCKF_DEBUG             opt_debug_lockf.h
377 LOUTB                   opt_debug_outb.h
378 NPX_DEBUG               opt_debug_npx.h
379 NETATALKDEBUG           opt_atalk.h
380 SI_DEBUG                opt_debug_si.h
381
382 # Fb options
383 FB_DEBUG                opt_fb.h
384 FB_INSTALL_CDEV         opt_fb.h
385
386 # ppbus related options
387 PERIPH_1284             opt_ppb_1284.h
388 DONTPROBE_1284          opt_ppb_1284.h
389
390 # smbus related options
391 ENABLE_ALART            opt_intpm.h
392
393 # These cause changes all over the kernel
394 BLKDEV_IOSIZE           opt_global.h
395 DEBUG                   opt_global.h
396 DEBUG_LOCKS             opt_global.h
397 DEBUG_CRIT_SECTIONS     opt_global.h
398 DIAGNOSTIC              opt_global.h
399 INVARIANTS              opt_global.h
400 SIMPLELOCK_DEBUG        opt_global.h
401 VFS_BIO_DEBUG           opt_global.h
402 DEBUG_INTERRUPTS        opt_global.h
403 SOCKBUF_DEBUG           opt_global.h
404 PANIC_DEBUG             opt_global.h
405 MBUF_DEBUG              opt_global.h
406
407 # Sample system/interrupt PC
408 DEBUG_PCTRACK           opt_pctrack.h
409
410 # These are VM related options
411 NO_SWAPPING             opt_vm.h
412 PQ_CACHESIZE            opt_vmpage.h
413
414 # Standard SMP options
415 SMP                     opt_global.h
416
417 # sys/netkey
418 KEY
419
420 # Size of the kernel message buffer
421 MSGBUF_SIZE             opt_msgbuf.h
422
423 # PCI related options
424 PCI_QUIET               opt_pci.h
425 PCI_ENABLE_IO_MODES     opt_pci.h
426 PCI_MAP_FIXUP           opt_pci.h
427 COMPAT_OLDPCI
428
429 # NFS options
430 NFS_MINATTRTIMO         opt_nfs.h
431 NFS_MAXATTRTIMO         opt_nfs.h
432 NFS_MINDIRATTRTIMO      opt_nfs.h
433 NFS_MAXDIRATTRTIMO      opt_nfs.h
434 NFS_GATHERDELAY         opt_nfs.h
435 NFS_UIDHASHSIZ          opt_nfs.h
436 NFS_WDELAYHASHSIZ       opt_nfs.h
437 NFS_MUIDHASHSIZ         opt_nfs.h
438 NFS_NOSERVER            opt_nfs.h
439 NFS_DEBUG               opt_nfs.h
440
441 # MSDOSFS options
442 MSDOSFS_DEBUG           opt_msdosfs.h
443
444 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
445 BROOKTREE_SYSTEM_DEFAULT        opt_bktr.h
446 BROOKTREE_ALLOC_PAGES           opt_bktr.h
447 BKTR_OVERRIDE_CARD              opt_bktr.h
448 BKTR_OVERRIDE_TUNER             opt_bktr.h
449 BKTR_OVERRIDE_DBX               opt_bktr.h
450 BKTR_OVERRIDE_MSP               opt_bktr.h
451 BKTR_SYSTEM_DEFAULT             opt_bktr.h
452 BKTR_ALLOC_PAGES                opt_bktr.h
453 BKTR_USE_PLL                    opt_bktr.h      
454 BKTR_GPIO_ACCESS                opt_bktr.h
455 BKTR_NO_MSP_RESET               opt_bktr.h
456 BKTR_430_FX_MODE                opt_bktr.h
457 BKTR_SIS_VIA_MODE               opt_bktr.h
458 BKTR_NEW_MSP34XX_DRIVER         opt_bktr.h
459
460 # meteor opt_meteor.h
461 METEOR_ALLOC_PAGES      opt_meteor.h
462 METEOR_TEST_VIDEO       opt_meteor.h
463 METEOR_SYSTEM_DEFAULT   opt_meteor.h
464 METEOR_DEALLOC_PAGES    opt_meteor.h
465 METEOR_DEALLOC_ABOVE    opt_meteor.h
466
467 # Various mi ISA bus flags
468 COMPAT_OLDISA           opt_compat_oldisa.h
469 COM_ESP                 opt_sio.h
470 COM_MULTIPORT           opt_sio.h
471 BREAK_TO_DEBUGGER       opt_comconsole.h
472 ALT_BREAK_TO_DEBUGGER   opt_comconsole.h
473
474 # options for bus/device framework
475 BUS_DEBUG               opt_bus.h
476 DEVICE_SYSCTLS          opt_bus.h
477
478 # options for USB support
479 OHCI_DEBUG              opt_usb.h
480 USB_DEBUG               opt_usb.h
481
482 # Vinum options
483 VINUMDEBUG              opt_vinum.h
484
485 # Embedded system options
486 UKBD_DFLT_KEYMAP        opt_ukbd.h
487 INIT_PATH               opt_init_path.h
488
489 ROOTDEVNAME             opt_rootdevname.h
490
491 FDC_DEBUG               opt_fdc.h
492 PCFCLOCK_VERBOSE        opt_pcfclock.h
493 PCFCLOCK_MAX_RETRIES    opt_pcfclock.h
494
495 # Polling device handling
496 DEVICE_POLLING          opt_polling.h
497
498 # options for ubsec driver
499 UBSEC_DEBUG             opt_ubsec.h
500 UBSEC_RNDTEST           opt_ubsec.h
501 UBSEC_NO_RNG            opt_ubsec.h
502
503 # options for hifn driver
504 HIFN_DEBUG              opt_hifn.h
505 HIFN_RNDTEST            opt_hifn.h
506 HIFN_NO_RNG             opt_hifn.h
507
508 # KTR options
509 KTR                             opt_global.h
510 KTR_ALL                         opt_ktr.h
511 KTR_TOKENS                      opt_ktr.h
512 KTR_MEMORY                      opt_ktr.h
513 KTR_USB_MEMORY                  opt_ktr.h
514 KTR_IPIQ                        opt_ktr.h
515 KTR_MSGPORT                     opt_ktr.h
516 KTR_ENTRIES                     opt_global.h
517 KTR_VERBOSE                     opt_ktr.h
518 KTR_GIANT_CONTENTION            opt_ktr.h
519 KTR_SPIN_CONTENTION             opt_ktr.h
520 KTR_IF_BGE                      opt_ktr.h
521 KTR_IF_EM                       opt_ktr.h
522
523 # bce driver
524 BCE_DEBUG               opt_bce.h
525 BCE_NVRAM_WRITE_SUPPORT opt_bce.h
526
527 # ed driver
528 ED_NO_MIIBUS            opt_ed.h
529
530 # wi driver
531 WI_SYMBOL_FIRMWARE      opt_wi.h
532
533 # dcons options
534 DCONS_BUF_SIZE          opt_dcons.h
535 DCONS_POLL_HZ           opt_dcons.h
536 DCONS_FORCE_CONSOLE     opt_dcons.h
537 DCONS_FORCE_GDB         opt_dcons.h
538
539 # deprecated drivers and options
540 I_WANT_DEPRECATED_STUFF opt_deprecated.h
541
542 # SCTP
543 SCTP                    opt_sctp.h
544 SCTP_DEBUG              opt_sctp.h
545 SCTP_USE_ADLER32        opt_sctp.h
546 SCTP_HIGH_SPEED         opt_sctp.h
547 SCTP_STAT_LOGGING       opt_sctp.h
548 SCTP_CWND_LOGGING       opt_sctp.h
549 SCTP_BLK_LOGGING        opt_sctp.h
550 SCTP_STR_LOGGING        opt_sctp.h
551 SCTP_FR_LOGGING         opt_sctp.h
552 SCTP_MAP_LOGGING        opt_sctp.h
553
554 # syslink kernel support
555 #
556 SYSLINK                 opt_syslink.h