2 * Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the author nor the names of any co-contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * $FreeBSD: src/sys/i386/acpica/madt.c,v 1.17 2004/06/10 20:03:46 jhb Exp $
30 * $DragonFly: src/sys/i386/acpica5/Attic/madt.c,v 1.4 2005/06/27 22:32:00 dillon Exp $
33 #include <sys/param.h>
34 #include <sys/systm.h>
36 #include <sys/kernel.h>
37 #include <sys/malloc.h>
38 #include <sys/globaldata.h>
41 #include <vm/vm_param.h>
44 #include <machine/apicreg.h>
45 #include <machine/frame.h>
46 /*#include <machine/intr_machdep.h>*/
47 #include <machine/md_var.h>
48 #include <machine/apicvar.h>
49 #include <machine/specialreg.h>
50 #include <machine/smp.h>
51 #include <machine/globaldata.h>
56 #include <bus/pci/pcivar.h>
58 #define NIOAPICS 32 /* Max number of I/O APICs */
59 #define NLAPICS 32 /* Max number of local APICs */
61 typedef void madt_entry_handler(APIC_HEADER *entry, void *arg);
63 /* These two arrays are indexed by APIC IDs. */
74 static int madt_found_sci_override;
75 static MULTIPLE_APIC_TABLE *madt;
76 static vm_paddr_t madt_physaddr;
77 static vm_offset_t madt_length;
79 MALLOC_DEFINE(M_MADT, "MADT Table", "ACPI MADT Table Items");
81 static enum intr_polarity interrupt_polarity(UINT16 Polarity, UINT8 Source);
82 static enum intr_trigger interrupt_trigger(UINT16 TriggerMode, UINT8 Source);
83 static int madt_find_cpu(u_int acpi_id, u_int *apic_id);
84 static int madt_find_interrupt(int intr, void **apic, u_int *pin);
85 static void *madt_map(vm_paddr_t pa, int offset, vm_offset_t length);
86 static void *madt_map_table(vm_paddr_t pa, int offset, const char *sig);
87 static void madt_parse_apics(APIC_HEADER *entry, void *arg);
88 static void madt_parse_interrupt_override(MADT_INTERRUPT_OVERRIDE *intr);
89 static void madt_parse_ints(APIC_HEADER *entry, void *arg __unused);
90 static void madt_parse_local_nmi(MADT_LOCAL_APIC_NMI *nmi);
91 static void madt_parse_nmi(MADT_NMI_SOURCE *nmi);
92 static int madt_probe(void);
93 static int madt_probe_cpus(void);
94 static void madt_probe_cpus_handler(APIC_HEADER *entry, void *arg __unused);
95 static int madt_probe_table(vm_paddr_t address);
96 static void madt_register(void *dummy);
97 static int madt_setup_local(void);
98 static int madt_setup_io(void);
99 static void madt_unmap(void *data, vm_offset_t length);
100 static void madt_unmap_table(void *table);
101 static void madt_walk_table(madt_entry_handler *handler, void *arg);
103 static struct apic_enumerator madt_enumerator = {
112 * Code to abuse the crashdump map to map in the tables for the early
113 * probe. We cheat and make the following assumptions about how we
114 * use this KVA: page 0 is used to map in the first page of each table
115 * found via the RSDT or XSDT and pages 1 to n are used to map in the
116 * RSDT or XSDT. The offset is in pages; the length is in bytes.
119 madt_map(vm_paddr_t pa, int offset, vm_offset_t length)
124 off = pa & PAGE_MASK;
125 length = roundup(length + off, PAGE_SIZE);
127 va = (vm_offset_t)pmap_kenter_temporary(pa, offset) +
128 (offset * PAGE_SIZE);
129 data = (void *)(va + off);
136 cpu_invlpg((void *)va);
142 madt_unmap(void *data, vm_offset_t length)
146 va = (vm_offset_t)data;
147 off = va & PAGE_MASK;
148 length = roundup(length + off, PAGE_SIZE);
152 cpu_invlpg((void *)va);
159 madt_map_table(vm_paddr_t pa, int offset, const char *sig)
161 ACPI_TABLE_HEADER *header;
165 header = madt_map(pa, offset, sizeof(ACPI_TABLE_HEADER));
166 if (strncmp(header->Signature, sig, 4) != 0) {
167 madt_unmap(header, sizeof(ACPI_TABLE_HEADER));
170 length = header->Length;
171 madt_unmap(header, sizeof(ACPI_TABLE_HEADER));
172 table = madt_map(pa, offset, length);
173 if (ACPI_FAILURE(AcpiTbVerifyTableChecksum(table))) {
175 printf("MADT: Failed checksum for table %s\n", sig);
176 madt_unmap(table, length);
183 madt_unmap_table(void *table)
185 ACPI_TABLE_HEADER *header;
187 header = (ACPI_TABLE_HEADER *)table;
188 madt_unmap(table, header->Length);
192 * Look for an ACPI Multiple APIC Description Table ("APIC")
197 ACPI_POINTER rsdp_ptr;
198 RSDP_DESCRIPTOR *rsdp;
199 RSDT_DESCRIPTOR *rsdt;
200 XSDT_DESCRIPTOR *xsdt;
203 if (resource_disabled("acpi", 0))
207 * Map in the RSDP. Since ACPI uses AcpiOsMapMemory() which in turn
208 * calls pmap_mapdev() to find the RSDP, we assume that we can use
209 * pmap_mapdev() to map the RSDP.
211 if (AcpiOsGetRootPointer(ACPI_LOGICAL_ADDRESSING, &rsdp_ptr) != AE_OK)
213 rsdp = pmap_mapdev(rsdp_ptr.Pointer.Physical, sizeof(RSDP_DESCRIPTOR));
216 printf("MADT: Failed to map RSDP\n");
221 * For ACPI < 2.0, use the RSDT. For ACPI >= 2.0, use the XSDT.
222 * We map the XSDT and RSDT at page 1 in the crashdump area.
223 * Page 0 is used to map in the headers of candidate ACPI tables.
225 if (rsdp->Revision >= 2) {
227 * AcpiOsGetRootPointer only verifies the checksum for
228 * the version 1.0 portion of the RSDP. Version 2.0 has
229 * an additional checksum that we verify first.
231 if (AcpiTbChecksum(rsdp, ACPI_RSDP_XCHECKSUM_LENGTH) != 0) {
233 printf("MADT: RSDP failed extended checksum\n");
236 xsdt = madt_map_table(rsdp->XsdtPhysicalAddress, 1, XSDT_SIG);
239 printf("MADT: Failed to map XSDT\n");
242 count = (xsdt->Length - sizeof(ACPI_TABLE_HEADER)) /
244 for (i = 0; i < count; i++)
245 if (madt_probe_table(xsdt->TableOffsetEntry[i]))
247 madt_unmap_table(xsdt);
249 rsdt = madt_map_table(rsdp->RsdtPhysicalAddress, 1, RSDT_SIG);
252 printf("MADT: Failed to map RSDT\n");
255 count = (rsdt->Length - sizeof(ACPI_TABLE_HEADER)) /
257 for (i = 0; i < count; i++)
258 if (madt_probe_table(rsdt->TableOffsetEntry[i]))
260 madt_unmap_table(rsdt);
262 pmap_unmapdev((vm_offset_t)rsdp, sizeof(RSDP_DESCRIPTOR));
263 if (madt_physaddr == 0) {
265 printf("MADT: No MADT table found\n");
269 printf("MADT: Found table at 0x%jx\n",
270 (uintmax_t)madt_physaddr);
273 * Verify that we can map the full table and that its checksum is
276 madt = madt_map_table(madt_physaddr, 0, APIC_SIG);
279 madt_unmap_table(madt);
286 * See if a given ACPI table is the MADT.
289 madt_probe_table(vm_paddr_t address)
291 ACPI_TABLE_HEADER *table;
293 table = madt_map(address, 0, sizeof(ACPI_TABLE_HEADER));
296 printf("MADT: Failed to map table at 0x%jx\n",
301 printf("Table '%.4s' at 0x%jx\n", table->Signature,
304 if (strncmp(table->Signature, APIC_SIG, 4) != 0) {
305 madt_unmap(table, sizeof(ACPI_TABLE_HEADER));
308 madt_physaddr = address;
309 madt_length = table->Length;
310 madt_unmap(table, sizeof(ACPI_TABLE_HEADER));
315 * Run through the MP table enumerating CPUs.
318 madt_probe_cpus(void)
321 madt = madt_map_table(madt_physaddr, 0, APIC_SIG);
322 KASSERT(madt != NULL, ("Unable to re-map MADT"));
323 madt_walk_table(madt_probe_cpus_handler, NULL);
324 madt_unmap_table(madt);
330 * Initialize the local APIC on the BSP.
333 madt_setup_local(void)
336 madt = pmap_mapdev(madt_physaddr, madt_length);
337 lapic_init((uintptr_t)madt->LocalApicAddress);
338 printf("ACPI APIC Table: <%.*s %.*s>\n",
339 (int)sizeof(madt->OemId), madt->OemId,
340 (int)sizeof(madt->OemTableId), madt->OemTableId);
343 * We ignore 64-bit local APIC override entries. Should we
344 * perhaps emit a warning here if we find one?
350 * Enumerate I/O APICs and setup interrupt sources.
359 /* Try to initialize ACPI so that we can access the FADT. */
361 if (ACPI_FAILURE(i)) {
362 printf("MADT: ACPI Startup failed with %s\n",
363 AcpiFormatException(i));
364 printf("Try disabling either ACPI or apic support.\n");
365 panic("Using MADT but ACPI doesn't work");
368 /* First, we run through adding I/O APIC's. */
369 if (madt->PCATCompat)
370 ioapic_enable_mixed_mode();
371 madt_walk_table(madt_parse_apics, NULL);
373 /* Second, we run through the table tweaking interrupt sources. */
374 madt_walk_table(madt_parse_ints, NULL);
377 * If there was not an explicit override entry for the SCI,
378 * force it to use level trigger and active-low polarity.
380 if (!madt_found_sci_override) {
381 if (madt_find_interrupt(AcpiGbl_FADT->SciInt, &ioapic, &pin)
383 printf("MADT: Could not find APIC for SCI IRQ %d\n",
384 AcpiGbl_FADT->SciInt);
387 "MADT: Forcing active-low polarity and level trigger for SCI\n");
388 ioapic_set_polarity(ioapic, pin, INTR_POLARITY_LOW);
389 ioapic_set_triggermode(ioapic, pin, INTR_TRIGGER_LEVEL);
393 /* Third, we register all the I/O APIC's. */
394 for (i = 0; i < NIOAPICS; i++)
395 if (ioapics[i].io_apic != NULL)
396 ioapic_register(ioapics[i].io_apic);
398 /* Finally, we throw the switch to enable the I/O APIC's. */
399 acpi_SetDefaultIntrModel(ACPI_INTR_APIC);
405 madt_register(void *dummy __unused)
408 apic_register_enumerator(&madt_enumerator);
410 SYSINIT(madt_register, SI_SUB_CPU - 1, SI_ORDER_FIRST, madt_register, NULL)
413 * Call the handler routine for each entry in the MADT table.
416 madt_walk_table(madt_entry_handler *handler, void *arg)
421 end = (u_char *)(madt) + madt->Length;
422 for (p = (u_char *)(madt + 1); p < end; ) {
423 entry = (APIC_HEADER *)p;
430 madt_probe_cpus_handler(APIC_HEADER *entry, void *arg)
432 MADT_PROCESSOR_APIC *proc;
433 struct lapic_info *la;
435 switch (entry->Type) {
438 * The MADT does not include a BSP flag, so we have to
439 * let the MP code figure out which CPU is the BSP on
442 proc = (MADT_PROCESSOR_APIC *)entry;
444 printf("MADT: Found CPU APIC ID %d ACPI ID %d: %s\n",
445 proc->LocalApicId, proc->ProcessorId,
446 proc->ProcessorEnabled ? "enabled" : "disabled");
447 if (!proc->ProcessorEnabled)
449 if (proc->LocalApicId >= NLAPICS)
450 panic("%s: CPU ID %d too high", __func__,
452 la = &lapics[proc->LocalApicId];
453 KASSERT(la->la_enabled == 0,
454 ("Duplicate local APIC ID %d", proc->LocalApicId));
456 la->la_acpi_id = proc->ProcessorId;
457 lapic_create(proc->LocalApicId, 0);
464 * Add an I/O APIC from an entry in the table.
467 madt_parse_apics(APIC_HEADER *entry, void *arg __unused)
471 switch (entry->Type) {
473 apic = (MADT_IO_APIC *)entry;
475 printf("MADT: Found IO APIC ID %d, Interrupt %d at %p\n",
476 apic->IoApicId, apic->Interrupt,
477 (void *)(uintptr_t)apic->Address);
478 if (apic->IoApicId >= NIOAPICS)
479 panic("%s: I/O APIC ID %d too high", __func__,
481 if (ioapics[apic->IoApicId].io_apic != NULL)
482 panic("%s: Double APIC ID %d", __func__,
484 ioapics[apic->IoApicId].io_apic = ioapic_create(
485 (uintptr_t)apic->Address, apic->IoApicId,
487 ioapics[apic->IoApicId].io_vector = apic->Interrupt;
495 * Determine properties of an interrupt source. Note that for ACPI these
496 * functions are only used for ISA interrupts, so we assume ISA bus values
497 * (Active Hi, Edge Triggered) for conforming values except for the ACPI
498 * SCI for which we use Active Lo, Level Triggered.
500 static enum intr_polarity
501 interrupt_polarity(UINT16 Polarity, UINT8 Source)
505 case POLARITY_CONFORMS:
506 if (Source == AcpiGbl_FADT->SciInt)
507 return (INTR_POLARITY_LOW);
509 return (INTR_POLARITY_HIGH);
510 case POLARITY_ACTIVE_HIGH:
511 return (INTR_POLARITY_HIGH);
512 case POLARITY_ACTIVE_LOW:
513 return (INTR_POLARITY_LOW);
515 panic("Bogus Interrupt Polarity");
519 static enum intr_trigger
520 interrupt_trigger(UINT16 TriggerMode, UINT8 Source)
523 switch (TriggerMode) {
524 case TRIGGER_CONFORMS:
525 if (Source == AcpiGbl_FADT->SciInt)
526 return (INTR_TRIGGER_LEVEL);
528 return (INTR_TRIGGER_EDGE);
530 return (INTR_TRIGGER_EDGE);
532 return (INTR_TRIGGER_LEVEL);
534 panic("Bogus Interrupt Trigger Mode");
539 * Find the local APIC ID associated with a given ACPI Processor ID.
542 madt_find_cpu(u_int acpi_id, u_int *apic_id)
546 for (i = 0; i < NLAPICS; i++) {
547 if (!lapics[i].la_enabled)
549 if (lapics[i].la_acpi_id != acpi_id)
558 * Find the IO APIC and pin on that APIC associated with a given global
562 madt_find_interrupt(int intr, void **apic, u_int *pin)
567 for (i = 0; i < NIOAPICS; i++) {
568 if (ioapics[i].io_apic == NULL ||
569 ioapics[i].io_vector > intr)
572 ioapics[best].io_vector < ioapics[i].io_vector)
577 *apic = ioapics[best].io_apic;
578 *pin = intr - ioapics[best].io_vector;
580 printf("WARNING: Found intpin of %u for vector %d\n", *pin,
586 * Parse an interrupt source override for an ISA interrupt.
589 madt_parse_interrupt_override(MADT_INTERRUPT_OVERRIDE *intr)
591 void *new_ioapic, *old_ioapic;
592 u_int new_pin, old_pin;
593 enum intr_trigger trig;
594 enum intr_polarity pol;
598 printf("MADT: intr override: source %u, irq %u\n",
599 intr->Source, intr->Interrupt);
600 KASSERT(intr->Bus == 0, ("bus for interrupt overrides must be zero"));
601 if (madt_find_interrupt(intr->Interrupt, &new_ioapic,
603 printf("MADT: Could not find APIC for vector %d (IRQ %d)\n",
604 intr->Interrupt, intr->Source);
609 * Lookup the appropriate trigger and polarity modes for this
612 trig = interrupt_trigger(intr->TriggerMode, intr->Source);
613 pol = interrupt_polarity(intr->Polarity, intr->Source);
616 * If the SCI is identity mapped but has edge trigger and
617 * active-hi polarity or the force_sci_lo tunable is set,
618 * force it to use level/lo.
620 if (intr->Source == AcpiGbl_FADT->SciInt) {
621 madt_found_sci_override = 1;
622 if (getenv_string("hw.acpi.sci.trigger", buf, sizeof(buf))) {
623 if (tolower(buf[0]) == 'e')
624 trig = INTR_TRIGGER_EDGE;
625 else if (tolower(buf[0]) == 'l')
626 trig = INTR_TRIGGER_LEVEL;
629 "Invalid trigger %s: must be 'edge' or 'level'",
631 printf("MADT: Forcing SCI to %s trigger\n",
632 trig == INTR_TRIGGER_EDGE ? "edge" : "level");
634 if (getenv_string("hw.acpi.sci.polarity", buf, sizeof(buf))) {
635 if (tolower(buf[0]) == 'h')
636 pol = INTR_POLARITY_HIGH;
637 else if (tolower(buf[0]) == 'l')
638 pol = INTR_POLARITY_LOW;
641 "Invalid polarity %s: must be 'high' or 'low'",
643 printf("MADT: Forcing SCI to active %s polarity\n",
644 pol == INTR_POLARITY_HIGH ? "high" : "low");
648 /* Remap the IRQ if it is mapped to a different interrupt vector. */
649 if (intr->Source != intr->Interrupt) {
651 * If the SCI is remapped to a non-ISA global interrupt,
652 * then override the vector we use to setup and allocate
655 if (intr->Interrupt > 15 &&
656 intr->Source == AcpiGbl_FADT->SciInt)
657 acpi_OverrideInterruptLevel(intr->Interrupt);
659 ioapic_remap_vector(new_ioapic, new_pin, intr->Source);
660 if (madt_find_interrupt(intr->Source, &old_ioapic,
662 printf("MADT: Could not find APIC for source IRQ %d\n",
664 else if (ioapic_get_vector(old_ioapic, old_pin) ==
666 ioapic_disable_pin(old_ioapic, old_pin);
669 /* Program the polarity and trigger mode. */
670 ioapic_set_triggermode(new_ioapic, new_pin, trig);
671 ioapic_set_polarity(new_ioapic, new_pin, pol);
675 * Parse an entry for an NMI routed to an IO APIC.
678 madt_parse_nmi(MADT_NMI_SOURCE *nmi)
683 if (madt_find_interrupt(nmi->Interrupt, &ioapic, &pin) != 0) {
684 printf("MADT: Could not find APIC for vector %d\n",
689 ioapic_set_nmi(ioapic, pin);
690 if (nmi->TriggerMode != TRIGGER_CONFORMS)
691 ioapic_set_triggermode(ioapic, pin,
692 interrupt_trigger(nmi->TriggerMode, 0));
693 if (nmi->Polarity != TRIGGER_CONFORMS)
694 ioapic_set_polarity(ioapic, pin,
695 interrupt_polarity(nmi->Polarity, 0));
699 * Parse an entry for an NMI routed to a local APIC LVT pin.
702 madt_parse_local_nmi(MADT_LOCAL_APIC_NMI *nmi)
706 if (nmi->ProcessorId == 0xff)
707 apic_id = APIC_ID_ALL;
708 else if (madt_find_cpu(nmi->ProcessorId, &apic_id) != 0) {
710 printf("MADT: Ignoring local NMI routed to ACPI CPU %u\n",
718 lapic_set_lvt_mode(apic_id, pin, APIC_LVT_DM_NMI);
719 if (nmi->TriggerMode != TRIGGER_CONFORMS)
720 lapic_set_lvt_triggermode(apic_id, pin,
721 interrupt_trigger(nmi->TriggerMode, 0));
722 if (nmi->Polarity != POLARITY_CONFORMS)
723 lapic_set_lvt_polarity(apic_id, pin,
724 interrupt_polarity(nmi->Polarity, 0));
728 * Parse interrupt entries.
731 madt_parse_ints(APIC_HEADER *entry, void *arg __unused)
734 switch (entry->Type) {
735 case APIC_XRUPT_OVERRIDE:
736 madt_parse_interrupt_override(
737 (MADT_INTERRUPT_OVERRIDE *)entry);
740 madt_parse_nmi((MADT_NMI_SOURCE *)entry);
743 madt_parse_local_nmi((MADT_LOCAL_APIC_NMI *)entry);
749 * Setup per-CPU ACPI IDs.
752 madt_set_ids(void *dummy)
754 struct lapic_info *la;
755 struct mdglobaldata *md;
760 for (i = 0; i < ncpus; i++) {
761 if ((smp_active_mask & (1 << i)) == 0)
763 md = (struct mdglobaldata *)globaldata_find(i);
764 KKASSERT(md != NULL);
765 la = &lapics[md->gd_apic_id];
767 panic("APIC: CPU with APIC ID %u is not enabled",
769 md->gd_acpi_id = la->la_acpi_id;
771 printf("APIC: CPU %u has ACPI ID %u\n", i,
775 SYSINIT(madt_set_ids, SI_SUB_CPU, SI_ORDER_ANY, madt_set_ids, NULL)