Import libarchive-3.0.2.
[dragonfly.git] / contrib / libarchive / libarchive / archive_write_add_filter_gzip.c
1 /*-
2  * Copyright (c) 2003-2007 Tim Kientzle
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24  */
25
26 #include "archive_platform.h"
27
28 __FBSDID("$FreeBSD: head/lib/libarchive/archive_write_set_compression_gzip.c 201081 2009-12-28 02:04:42Z kientzle $");
29
30 #ifdef HAVE_ERRNO_H
31 #include <errno.h>
32 #endif
33 #ifdef HAVE_STDLIB_H
34 #include <stdlib.h>
35 #endif
36 #ifdef HAVE_STRING_H
37 #include <string.h>
38 #endif
39 #include <time.h>
40 #ifdef HAVE_ZLIB_H
41 #include <zlib.h>
42 #endif
43
44 #include "archive.h"
45 #include "archive_private.h"
46 #include "archive_write_private.h"
47
48 #if ARCHIVE_VERSION_NUMBER < 4000000
49 int
50 archive_write_set_compression_gzip(struct archive *a)
51 {
52         __archive_write_filters_free(a);
53         return (archive_write_add_filter_gzip(a));
54 }
55 #endif
56
57 #ifndef HAVE_ZLIB_H
58 int
59 archive_write_add_filter_gzip(struct archive *a)
60 {
61         archive_set_error(a, ARCHIVE_ERRNO_MISC,
62             "gzip compression not supported on this platform");
63         return (ARCHIVE_FATAL);
64 }
65 #else
66 /* Don't compile this if we don't have zlib. */
67
68 struct private_data {
69         int              compression_level;
70         z_stream         stream;
71         int64_t          total_in;
72         unsigned char   *compressed;
73         size_t           compressed_buffer_size;
74         unsigned long    crc;
75 };
76
77 /*
78  * Yuck.  zlib.h is not const-correct, so I need this one bit
79  * of ugly hackery to convert a const * pointer to a non-const pointer.
80  */
81 #define SET_NEXT_IN(st,src)                                     \
82         (st)->stream.next_in = (Bytef *)(uintptr_t)(const void *)(src)
83
84 static int archive_compressor_gzip_options(struct archive_write_filter *,
85                     const char *, const char *);
86 static int archive_compressor_gzip_open(struct archive_write_filter *);
87 static int archive_compressor_gzip_write(struct archive_write_filter *,
88                     const void *, size_t);
89 static int archive_compressor_gzip_close(struct archive_write_filter *);
90 static int archive_compressor_gzip_free(struct archive_write_filter *);
91 static int drive_compressor(struct archive_write_filter *,
92                     struct private_data *, int finishing);
93
94
95 /*
96  * Add a gzip compression filter to this write handle.
97  */
98 int
99 archive_write_add_filter_gzip(struct archive *_a)
100 {
101         struct archive_write *a = (struct archive_write *)_a;
102         struct archive_write_filter *f = __archive_write_allocate_filter(_a);
103         struct private_data *data;
104         archive_check_magic(&a->archive, ARCHIVE_WRITE_MAGIC,
105             ARCHIVE_STATE_NEW, "archive_write_add_filter_gzip");
106
107         data = calloc(1, sizeof(*data));
108         if (data == NULL) {
109                 archive_set_error(&a->archive, ENOMEM, "Out of memory");
110                 return (ARCHIVE_FATAL);
111         }
112         f->data = data;
113         data->compression_level = Z_DEFAULT_COMPRESSION;
114         f->open = &archive_compressor_gzip_open;
115         f->options = &archive_compressor_gzip_options;
116         f->close = &archive_compressor_gzip_close;
117         f->free = &archive_compressor_gzip_free;
118         f->code = ARCHIVE_COMPRESSION_GZIP;
119         f->name = "gzip";
120         return (ARCHIVE_OK);
121 }
122
123 /*
124  * Setup callback.
125  */
126 static int
127 archive_compressor_gzip_open(struct archive_write_filter *f)
128 {
129         struct private_data *data = (struct private_data *)f->data;
130         int ret;
131         time_t t;
132
133         ret = __archive_write_open_filter(f->next_filter);
134         if (ret != ARCHIVE_OK)
135                 return (ret);
136
137         if (data->compressed == NULL) {
138                 data->compressed_buffer_size = 65536;
139                 data->compressed
140                     = (unsigned char *)malloc(data->compressed_buffer_size);
141                 if (data->compressed == NULL) {
142                         archive_set_error(f->archive, ENOMEM,
143                             "Can't allocate data for compression buffer");
144                         return (ARCHIVE_FATAL);
145                 }
146         }
147
148         data->crc = crc32(0L, NULL, 0);
149         data->stream.next_out = data->compressed;
150         data->stream.avail_out = data->compressed_buffer_size;
151
152         /* Prime output buffer with a gzip header. */
153         t = time(NULL);
154         data->compressed[0] = 0x1f; /* GZip signature bytes */
155         data->compressed[1] = 0x8b;
156         data->compressed[2] = 0x08; /* "Deflate" compression */
157         data->compressed[3] = 0; /* No options */
158         data->compressed[4] = (t)&0xff;  /* Timestamp */
159         data->compressed[5] = (t>>8)&0xff;
160         data->compressed[6] = (t>>16)&0xff;
161         data->compressed[7] = (t>>24)&0xff;
162         data->compressed[8] = 0; /* No deflate options */
163         data->compressed[9] = 3; /* OS=Unix */
164         data->stream.next_out += 10;
165         data->stream.avail_out -= 10;
166
167         f->write = archive_compressor_gzip_write;
168
169         /* Initialize compression library. */
170         ret = deflateInit2(&(data->stream),
171             data->compression_level,
172             Z_DEFLATED,
173             -15 /* < 0 to suppress zlib header */,
174             8,
175             Z_DEFAULT_STRATEGY);
176
177         if (ret == Z_OK) {
178                 f->data = data;
179                 return (ARCHIVE_OK);
180         }
181
182         /* Library setup failed: clean up. */
183         archive_set_error(f->archive, ARCHIVE_ERRNO_MISC, "Internal error "
184             "initializing compression library");
185
186         /* Override the error message if we know what really went wrong. */
187         switch (ret) {
188         case Z_STREAM_ERROR:
189                 archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
190                     "Internal error initializing "
191                     "compression library: invalid setup parameter");
192                 break;
193         case Z_MEM_ERROR:
194                 archive_set_error(f->archive, ENOMEM, "Internal error initializing "
195                     "compression library");
196                 break;
197         case Z_VERSION_ERROR:
198                 archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
199                     "Internal error initializing "
200                     "compression library: invalid library version");
201                 break;
202         }
203
204         return (ARCHIVE_FATAL);
205 }
206
207 /*
208  * Set write options.
209  */
210 static int
211 archive_compressor_gzip_options(struct archive_write_filter *f, const char *key,
212     const char *value)
213 {
214         struct private_data *data = (struct private_data *)f->data;
215
216         if (strcmp(key, "compression-level") == 0) {
217                 if (value == NULL || !(value[0] >= '0' && value[0] <= '9') ||
218                     value[1] != '\0')
219                         return (ARCHIVE_WARN);
220                 data->compression_level = value[0] - '0';
221                 return (ARCHIVE_OK);
222         }
223         return (ARCHIVE_WARN);
224 }
225
226 /*
227  * Write data to the compressed stream.
228  */
229 static int
230 archive_compressor_gzip_write(struct archive_write_filter *f, const void *buff,
231     size_t length)
232 {
233         struct private_data *data = (struct private_data *)f->data;
234         int ret;
235
236         /* Update statistics */
237         data->crc = crc32(data->crc, (const Bytef *)buff, length);
238         data->total_in += length;
239
240         /* Compress input data to output buffer */
241         SET_NEXT_IN(data, buff);
242         data->stream.avail_in = length;
243         if ((ret = drive_compressor(f, data, 0)) != ARCHIVE_OK)
244                 return (ret);
245
246         return (ARCHIVE_OK);
247 }
248
249 /*
250  * Finish the compression...
251  */
252 static int
253 archive_compressor_gzip_close(struct archive_write_filter *f)
254 {
255         unsigned char trailer[8];
256         struct private_data *data = (struct private_data *)f->data;
257         int ret, r1;
258
259         /* Finish compression cycle */
260         ret = drive_compressor(f, data, 1);
261         if (ret == ARCHIVE_OK) {
262                 /* Write the last compressed data. */
263                 ret = __archive_write_filter(f->next_filter,
264                     data->compressed,
265                     data->compressed_buffer_size - data->stream.avail_out);
266         }
267         if (ret == ARCHIVE_OK) {
268                 /* Build and write out 8-byte trailer. */
269                 trailer[0] = (data->crc)&0xff;
270                 trailer[1] = (data->crc >> 8)&0xff;
271                 trailer[2] = (data->crc >> 16)&0xff;
272                 trailer[3] = (data->crc >> 24)&0xff;
273                 trailer[4] = (data->total_in)&0xff;
274                 trailer[5] = (data->total_in >> 8)&0xff;
275                 trailer[6] = (data->total_in >> 16)&0xff;
276                 trailer[7] = (data->total_in >> 24)&0xff;
277                 ret = __archive_write_filter(f->next_filter, trailer, 8);
278         }
279
280         switch (deflateEnd(&(data->stream))) {
281         case Z_OK:
282                 break;
283         default:
284                 archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
285                     "Failed to clean up compressor");
286                 ret = ARCHIVE_FATAL;
287         }
288         r1 = __archive_write_close_filter(f->next_filter);
289         return (r1 < ret ? r1 : ret);
290 }
291
292 static int
293 archive_compressor_gzip_free(struct archive_write_filter *f)
294 {
295         struct private_data *data = (struct private_data *)f->data;
296         free(data->compressed);
297         free(data);
298         f->data = NULL;
299         return (ARCHIVE_OK);
300 }
301
302 /*
303  * Utility function to push input data through compressor,
304  * writing full output blocks as necessary.
305  *
306  * Note that this handles both the regular write case (finishing ==
307  * false) and the end-of-archive case (finishing == true).
308  */
309 static int
310 drive_compressor(struct archive_write_filter *f,
311     struct private_data *data, int finishing)
312 {
313         int ret;
314
315         for (;;) {
316                 if (data->stream.avail_out == 0) {
317                         ret = __archive_write_filter(f->next_filter,
318                             data->compressed,
319                             data->compressed_buffer_size);
320                         if (ret != ARCHIVE_OK)
321                                 return (ARCHIVE_FATAL);
322                         data->stream.next_out = data->compressed;
323                         data->stream.avail_out = data->compressed_buffer_size;
324                 }
325
326                 /* If there's nothing to do, we're done. */
327                 if (!finishing && data->stream.avail_in == 0)
328                         return (ARCHIVE_OK);
329
330                 ret = deflate(&(data->stream),
331                     finishing ? Z_FINISH : Z_NO_FLUSH );
332
333                 switch (ret) {
334                 case Z_OK:
335                         /* In non-finishing case, check if compressor
336                          * consumed everything */
337                         if (!finishing && data->stream.avail_in == 0)
338                                 return (ARCHIVE_OK);
339                         /* In finishing case, this return always means
340                          * there's more work */
341                         break;
342                 case Z_STREAM_END:
343                         /* This return can only occur in finishing case. */
344                         return (ARCHIVE_OK);
345                 default:
346                         /* Any other return value indicates an error. */
347                         archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
348                             "GZip compression failed:"
349                             " deflate() call returned status %d",
350                             ret);
351                         return (ARCHIVE_FATAL);
352                 }
353         }
354 }
355
356 #endif /* HAVE_ZLIB_H */