3 # Copyright (c) 1990 The Regents of the University of California.
6 # Written and contributed by W. Jolitz 12/90
8 # Redistribution and use in source and binary forms are permitted provided
9 # that: (1) source distributions retain this entire copyright notice and
10 # comment, and (2) distributions including binaries display the following
11 # acknowledgement: ``This product includes software developed by the
12 # University of California, Berkeley and its contributors'' in the
13 # documentation or other materials provided with the distribution and in
14 # all advertising materials mentioning features or use of this software.
15 # Neither the name of the University nor the names of its contributors may
16 # be used to endorse or promote products derived from this software without
17 # specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
19 # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
22 # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
23 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.57 2003/02/10 11:35:53 simokawa Exp $
24 # $DragonFly: src/etc/MAKEDEV,v 1.7 2004/03/17 19:20:12 dillon Exp $
26 # Device "make" file. Valid arguments:
27 # all makes all known devices, standard number of units (or close)
28 # std standard devices
29 # jail suitable for a jail(8)
30 # local configuration specific devices
31 # mach-4 mach4&lites+devices for Mach's XFree86 distribution
32 # (see http://www.cs.hut.fi/lites.html for more info on LITES)
35 # ast* ATAPI tape drives
36 # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
37 # sa* SCSI Sequential Access Devices
40 # aac* Adaptec FSA RAID controllers
41 # aacd* Adaptec FSA RAID
42 # acd* ATAPI CD-ROM disks
44 # afd* ATAPI floppy disks
46 # cd* SCSI CD-ROM disks
47 # da* SCSI Direct Access Devices
48 # fd* floppy disk drives (3 1/2", 5 1/4")
49 # fla* M-Systems DiskOnChip
50 # idad* Compaq Smart-2 RAID arrays
51 # ips* IBM ServeRAID controller
53 # mcd* Mitsumi CD-ROM disks
54 # md* Memory (or malloc) disk
55 # mlx* Mylex DAC960 RAID controllers
56 # mlxd* Mylex DAC960 RAID disk volumes
57 # pst* Promise SuperTrak RAID disks
58 # scd* Sony CD-ROM disks
62 # vty* virtual console devices for syscons/pcvt/codrv
65 # mse* Logitech and ATI Inport bus mouse
67 # jogdial Sony VAIO Jogdial
68 # sysmouse Mousesystems mouse emulator for syscons
71 # refclock-* serial ports used by xntpd parse refclocks
74 # tty* general purpose serial ports
75 # cua* dialout serial ports
76 # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
77 # cuaA* Specialix SI/XIO dialout ports
78 # ttyD* Digiboard - 16 dialin ports
79 # cuaD* Digiboard - 16 dialout ports
80 # ttyE* Stallion EasyIO (stl) dialin ports
81 # cuaE* Stallion EasyIO (stl) dialout ports
82 # ttyF* Stallion Brumby (stli) dialin ports
83 # cuaF* Stallion Brumby (stli) dialout ports
84 # ttyR* Rocketport dialin ports
85 # cuaR* Rocketport dialout ports
87 # stlN Stallion EasyIO board N dialin and dialout
88 # stliN Stallion Brumby board N dialin and dialout
91 # pty* set of 32 master and slave pseudo terminals
92 # vty* virtual terminals using syscons/pcvt/codrv console
96 # ppi* Parallel port i/o
97 # pps* Pulse per second timing interface
98 # pcfclock* Parallel time sync interface
105 # usb* USB bus control device
106 # ucom* USB serial devices
107 # ugen* generic USB device
108 # uhid* Human Interface Device (HID)
112 # urio* Diamond Rio 500
113 # uscanner* USB scanners
115 # SCSI devices (other than CD-ROM, tape and disk):
116 # ch* SCSI Media-Changer (juke box) driver
117 # pt* Processor Type (HP scanner, as one example)
118 # pass* CAM Passthrough device
119 # ses* SES (SCSI Environmental Services) and
120 # SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
122 # PC-CARD (previously called PCMCIA) support
123 # card* PC-CARD slots
126 # i4b isdnd call control device
127 # i4bctl debugging control device
128 # i4btrc* trace data interface(s), one per passive card
129 # i4btel* telephony interface(s)
130 # i4bteld* telephony dialout interface(s)
131 # i4brbch* raw b channel access device(s)
133 # Special purpose devices:
134 # apm Advanced Power Management BIOS
135 # apmctl APM BIOS control device
137 # crypto crypto interface
139 # tw* xten power controller
140 # snd* various sound cards
141 # pcaudio PCM audio driver
142 # socksys iBCS2 socket system driver
143 # vat VAT compatibility audio driver (requires snd*)
144 # gsc Genius GS-4500 hand scanner
146 # tun* Tunneling IP device
147 # tap* Ethernet Tunneling device
148 # snp* tty snoop devices
149 # spigot Video Spigot video acquisition card
150 # ctx* Cortex-I video acquisition card
151 # meteor* Matrox Meteor video acquisition card (pci)
152 # bktr* Bt848 based video acquisition card (pci)
153 # labpc* National Instrument's Lab-PC and LAB-PC+
154 # perfmon CPU performance-monitoring counters
155 # pci PCI configuration-space access from user mode
156 # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
157 # kbd keyboard devices
158 # elan-mmcr AMD Elan support (e.g. mmap MMCR)
159 # agpgart AGP interface
160 # cfs* Coda Distributed Filesystem
161 # nsmb* SMB/CIFS protocol interface
164 if [ -n "$MAKEDEVPATH" ]; then
171 # Usage: die exitcode msg
177 # Convert integer to partition name
182 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
183 8) p=i;; 9) p=j;; 10) p=k;; 11) p=l;; 12) p=m;; 13) p=n;; 14) p=o;; 15) p=p;;
189 # Convert integer to slice name
201 # Convert disk (type, unit, slice, partition) to minor number
204 echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | ($4 & 7) | ($4 & 8) << 17))
207 # Override mknod(2) to add extra handling to it.
209 for i in `IFS=':'; echo $PATH`; do
210 if [ -x "${i}/mknod" ]; then
218 4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";;
219 5) "$mknod" "$@" || die 2 "$mknod $@ failed";;
220 *) die 2 "bad node: mknod $@";;
224 # Convert tape (ctrl, unit, mode, access) to minor number
227 echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
230 # Convert the last character of a tty name to a minor number.
235 a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
236 h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
237 o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
244 # Convert a unit number to a minor number.
247 echo $(((($1 >> 8) << 16) | ($1 % 256)))
250 # For the stallion devices tty[EF]
251 # stallion major letter card iscallout
264 if [ $iscallout -gt 0 ]; then
272 *) die 1 "Invalid stl card number $card";;
275 # make the mem interface for extracting stats & loading microcode.
276 # 0x1000000 + card number
277 mknod staliomem$card c $major 0x0100000$card
279 while [ $port -lt $maxport ]; do
280 minor=$(($minorbase + $card * 1048576 + $port))
281 if [ $port -ge 32 ]; then
282 minor=$(($minor + 65504))
284 unit=$(($card * 64 + $port))
286 mknod ${pref}${letter}$unit c $major $minor $owner
287 mknod ${pref}i${letter}$unit c $major $(($minor + 32)) $owner
288 mknod ${pref}l${letter}$unit c $major $(($minor + 64)) $owner
293 # Raw partition for disks
296 # Compatibility slice for disks
299 # Raw slice for disks
303 disk_umask=037 # allow group operator to read disks
304 tape_umask=017 # allow group operator to read/write tapes
310 sh MAKEDEV std # standard
311 sh MAKEDEV fd0 fd1 # bdev, floppy disk
312 sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk
313 sh MAKEDEV ata # cdev, ATA control
314 sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk
315 sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk
316 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
317 sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk
318 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
319 sh MAKEDEV vn0 # bdev, virtual disk
320 sh MAKEDEV cd0 mcd0 scd0 # bdev, cdrom
321 sh MAKEDEV sa0 wt0 # bdev, tape
322 sh MAKEDEV vty12 # cdev, virtual tty
323 sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
324 sh MAKEDEV pty0 # cdev, pseudo tty
325 sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
326 sh MAKEDEV zs0 # big-Alpha serial tty
327 sh MAKEDEV kbd0 kbd1 # cdev, keyboard
328 sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse
329 sh MAKEDEV pcaudio speaker snd0 # cdev, noise
330 sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
331 sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
332 sh MAKEDEV iic0 iic1 # cdev, I2C device
333 sh MAKEDEV smb0 smb1 # cdev, SMBus device
334 sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
335 sh MAKEDEV usb1 uhid1 ums1 ulpt1 ugen1 # cdev, USB devices
336 sh MAKEDEV usb2 usb3 usb4 usb5 # cdev, USB devices
337 sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too
338 sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
339 sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
340 sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
341 sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
342 sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
343 sh MAKEDEV pass4 xpt2 # cdev, CAM
344 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
345 sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
346 sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
347 sh MAKEDEV agpgart # cdev, AGP
348 sh MAKEDEV nsmb0 # cdev, SMB/CIFS
349 sh MAKEDEV crypto # cdev, crypto
350 sh MAKEDEV fw0 fw1 fw2 fw3 fwmem0 # cdev, firewire
353 # a much restricted set of the above, to save precious i-nodes on the
356 sh MAKEDEV std # standard
357 sh MAKEDEV fd0 # bdev, floppy disk
358 sh MAKEDEV da0 # bdev, SCSI disk
359 sh MAKEDEV ad0 # bdev, ATA disk
360 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
361 sh MAKEDEV wd0 # bdev, OLD disk
362 sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
363 sh MAKEDEV vn0 # bdev, virtual disk
364 sh MAKEDEV cd0 # bdev, cdrom
365 sh MAKEDEV sa0 # bdev, tape
366 sh MAKEDEV vty2 # cdev, virtual tty
367 sh MAKEDEV cuaa0 # cdev, serial tty
368 sh MAKEDEV pty0 # cdev, pseudo tty
369 sh MAKEDEV ttyd0 # cdev, serial tty
370 sh MAKEDEV zs0 # big-Alpha serial tty
371 sh MAKEDEV kbd0 # cdev, keyboard
372 sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
373 sh MAKEDEV lpt0 # cdev, printer
374 sh MAKEDEV ppi0 # cdev, parallel port
375 sh MAKEDEV iic0 # cdev, I2C device
376 sh MAKEDEV smb0 # cdev, SMBus device
377 sh MAKEDEV ums0 # cdev, USB devices
378 sh MAKEDEV tun0 # cdev, network
379 sh MAKEDEV tap0 # cdev, network
380 sh MAKEDEV ch0 # cdev, miscellaneous
381 sh MAKEDEV apm apmctl card0 # cdev, laptop
382 sh MAKEDEV pass1 xpt1 # cdev, CAM
383 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
384 sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
385 sh MAKEDEV i4brbch0 # cdev, ISDN
390 mknod console c 0 0; chmod 600 console
391 mknod kmem c 2 1 root:kmem; chmod 640 kmem
392 mknod mem c 2 0 root:kmem; chmod 640 mem
393 mknod null c 2 2; chmod 666 null
394 mknod random c 2 3; chmod 644 random
395 mknod urandom c 2 4; chmod 644 urandom
396 mknod zero c 2 12; chmod 666 zero
397 mknod io c 2 14; chmod 600 io
398 mknod tty c 1 0; chmod 666 tty
399 mknod klog c 7 0; chmod 600 klog
400 mknod stdin c 22 0; chmod 666 stdin
401 mknod stdout c 22 1; chmod 666 stdout
402 mknod stderr c 22 2; chmod 666 stderr
403 mknod pci c 78 0; chmod 644 pci
406 while [ $i -lt 64 ]; do
417 rm mem kmem pci io klog console # for security
418 ln -sf null mem # for libkvm (ab)users
419 ln -sf null kmem # --//--
428 mknod timezone c 26 0
431 # Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
434 u=`expr $i : '..\(.*\)'`
435 if [ -z "${u}" ]; then u=0; fi
436 # default density, 512b blocks
437 mknod rwt${u} c 10 $(( 0 + $u)) root:operator
438 mknod nrwt${u} c 10 $(( 4 + $u)) root:operator
439 # default density, 1024b blocks
440 # mknod rWt${u} c 10 $((64 + $u)) root:operator
441 # mknod nrWt${u} c 10 $((68 + $u)) root:operator
442 mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes
443 mknod nrwt${u}b c 10 $((20 + $u)) root:operator
444 mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes
445 mknod nrwt${u}c c 10 $((28 + $u)) root:operator
446 mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes
447 mknod nrwt${u}d c 10 $((36 + $u)) root:operator
448 # mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes?
449 # mknod nrwt${u}e c 10 $((44 + $u)) root:operator
450 # mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes?
451 # mknod nrwt${u}f c 10 $((52 + $u)) root:operator
456 aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|ipsd*s*|md*s*|mlxd*s*|pst*s*|twed*s*|vn*s*|wd*s*|wfd*s*)
459 aacd*s*) name=aacd; chr=151;;
460 ad*s*) name=ad; chr=116;;
461 ar*s*) name=ar; chr=157;;
462 afd*s*) name=afd; chr=118;;
463 amrd*s*) name=amrd; chr=133;;
464 da*s*) name=da; chr=13;;
465 fla*s*) name=fla; chr=102;;
466 idad*s*) name=idad; chr=109;;
467 ipsd*s*) name=ipsd; chr=176;;
468 md*s*) name=md; chr=95;;
469 mlxd*s*) name=mlxd; chr=131;;
470 pst*s*) name=pst; chr=168;;
471 twed*s*) name=twed; chr=147;;
472 vn*s*) name=vn; chr=43;;
473 wd*s*) name=wd; chr=3;;
474 wfd*s*) name=wfd; chr=87;;
477 aacd*s*|amrd*s*|idad*s*|ipsd*s*|mlxd*s*|twed*s*)
478 unit=`expr $i : '....\([0-9]*\)s'`
479 slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
480 part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
482 afd*s*|fla*s*|pst*s*|wfd*s*)
483 unit=`expr $i : '...\([0-9]*\)s'`
484 slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
485 part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
488 unit=`expr $i : '..\([0-9]*\)s'`
489 slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
490 part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
494 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
499 slicename=`dkitos $slice`
500 minor=`dkminor 0 $unit $slice $dkrawpart`
501 mknod $name$unit$slicename c $chr $minor root:operator
502 rm -f r$name$unit$slicename
506 0) slice=$oldslice ;;
508 for part in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
510 minor=`dkminor 0 $unit $slice $part`
511 partname=`dkitop $part`
512 mknod $name$unit$slicename$partname \
513 c $chr $minor root:operator
514 rm -f r$name$unit$slicename$partname
520 echo bad partition for disk in: $i
525 echo bad slice for disk in: $i
530 echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
538 unit=`expr $i : '..\(.*\)'`
542 mknod ${name}${unit} c $chr $(($unit * 64)) root:operator
543 rm -f r${name}${unit}
544 # Fake BSD partitions
545 for i in a b c d e f g h
547 ln -f ${name}${unit} ${name}${unit}$i
548 rm -f r${name}${unit} r${name}${unit}$i
550 # User-readable and programmer-readable name sets
552 mknod ${name}${unit}.1720 c $chr $(($unit * 64 + 1)) \
554 rm -f r${name}${unit}.1720
555 # ln -f ${name}${unit}.1720 ${name}${unit}135hs21
556 # rm -f r${name}${unit}135hs21
558 mknod ${name}${unit}.1480 c $chr $(($unit * 64 + 2)) \
560 rm -f r${name}${unit}.1480
561 # ln -f ${name}${unit}.1480 ${name}${unit}135hs18
562 # rm -f r${name}${unit}135hs18
563 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18
564 # rm -f r${name}${unit}96hs18
566 mknod ${name}${unit}.1440 c $chr $(($unit * 64 + 3)) \
568 rm -f r${name}${unit}.1440
569 # ln -f ${name}${unit}.1440 ${name}${unit}135
570 # rm -f r${name}${unit}135
571 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18
572 # rm -f r${name}${unit}135ds18
573 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18
574 # rm -f r${name}${unit}96ds18
576 mknod ${name}${unit}.1200 c $chr $(($unit * 64 + 4)) \
578 rm -f r${name}${unit}.1200
579 # ln -f ${name}${unit}.1200 ${name}${unit}96
580 # rm -f r${name}${unit}96
581 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15
582 # rm -f r${name}${unit}96ds15
583 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15
584 # rm -f r${name}${unit}135ds15
586 mknod ${name}${unit}.820 c $chr $(($unit * 64 + 5)) \
588 rm -f r${name}${unit}.820
589 # ln -f ${name}${unit}.820 ${name}${unit}96hs10
590 # rm -f r${name}${unit}96hs10
591 # ln -f ${name}${unit}.820 ${name}${unit}135hs10
592 # rm -f r${name}${unit}135hs10
594 mknod ${name}${unit}.800 c $chr $(($unit * 64 + 6)) \
596 rm -f r${name}${unit}.800
597 # ln -f ${name}${unit}.800 ${name}${unit}96ds10
598 # rm -f r${name}${unit}96ds10
599 # ln -f ${name}${unit}.800 ${name}${unit}135ds10
600 # rm -f r${name}${unit}135ds10
602 mknod ${name}${unit}.720 c $chr $(($unit * 64 + 7)) \
604 rm -f r${name}${unit}.720
605 # ln -f ${name}${unit}.720 ${name}${unit}96ds9
606 # rm -f r${name}${unit}96ds9
607 # ln -f ${name}${unit}.720 ${name}${unit}135ds9
608 # rm -f r${name}${unit}135ds9
610 mknod ${name}${unit}.360 c $chr $(($unit * 64 + 8)) \
612 rm -f r${name}${unit}.360
613 # ln -f ${name}${unit}.360 ${name}${unit}48
614 # rm -f r${name}${unit}48
615 # ln -f ${name}${unit}.360 ${name}${unit}48ds9
616 # rm -f r${name}${unit}48ds9
618 mknod ${name}${unit}.640 c $chr $(($unit * 64 + 9)) \
620 rm -f r${name}${unit}.640
621 # ln -f ${name}${unit}.640 ${name}${unit}96ds8
622 # rm -f r${name}${unit}96ds8
623 # ln -f ${name}${unit}.640 ${name}${unit}135ds8
624 # rm -f r${name}${unit}135ds8
626 mknod ${name}${unit}.1232 c $chr $(($unit * 64 + 10)) \
628 rm -f r${name}${unit}.1232
629 # ln -f ${name}${unit}.1232 ${name}${unit}96ds8
630 # rm -f r${name}${unit}96ds8
631 # ln -f ${name}${unit}.1232 ${name}${unit}135ds8
632 # rm -f r${name}${unit}135ds8
635 echo bad unit for disk in: $i
641 aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|ipsd*|md*|mlxd*|pst*|twed*|vn*|wd*|wfd*)
644 aacd*) name=aacd; chr=151;;
645 ad*) name=ad; chr=116;;
646 ar*) name=ar; chr=157;;
647 afd*) name=afd; chr=118;;
648 amrd*) name=amrd; chr=133;;
649 da*) name=da; chr=13;;
650 fla*) name=fla; chr=102;;
651 idad*) name=idad; chr=109;;
652 ipsd*) name=ipsd; chr=176;;
653 md*) name=md; chr=95;;
654 mlxd*) name=mlxd; chr=131;;
655 pst*) name=pst; chr=168;;
656 twed*) name=twed; chr=147;;
657 vn*) name=vn; chr=43;;
658 wd*) name=wd; chr=3;;
659 wfd*) name=wfd; chr=87;;
662 aacd*|amrd*|idad*|ipsd*|mlxd*|twed*)
663 unit=`expr $i : '....\(.*\)'`
666 unit=`expr $i : '...\(.*\)'`
669 unit=`expr $i : '..\(.*\)'`
673 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
674 for slicepartname in s0h s1h s2 s3 s4
676 sh MAKEDEV $name$unit$slicepartname
680 echo bad unit for disk in: $i
690 unit=`expr $i : '...\(.*\)'`
692 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
693 for part in 0 1 2 3 4 5 6 7
695 minor=`dkminor 0 $unit 0 $part`
696 partname=`dkitop $part`
697 mknod $name$unit$partname c $chr $minor root:operator
698 rm -f r$name$unit$partname
702 echo bad unit for disk in: $i
708 # SCSI processor type driver
712 unit=`expr $i : 'pt\([0-9][0-9]*\)'`
713 if [ -z "${unit}" ]; then
716 unit=$(($unit + 1 - 1))
717 mknod ${name}${unit} c $chr `unit2minor $unit`
720 # SCSI SES/SAF-TE type driver
724 unit=`expr $i : 'ses\([0-9][0-9]*\)'`
725 if [ -z "${unit}" ]; then
728 unit=$(($unit + 1 - 1))
729 mknod ${name}${unit} c $chr `unit2minor $unit`
731 # SCSI target mode sample driver
735 unit=`expr $i : 'targ\([0-9][0-9]*\)'`
736 if [ -z "${unit}" ]; then
739 unit=$(($unit + 1 - 1))
740 mknod ${name}${unit} c $chr `unit2minor $unit`
741 mknod ${name}.ctl c $chr 0xffff00ff
744 # CAM transport layer device
746 # This major number is temporary
749 units=`expr $i : 'xpt\(.*\)'`
750 if [ -z "${units}" ]; then
754 while [ $i -lt $units ]; do
757 mknod $dname c $chr `unit2minor $i` root:operator
762 # CAM passthrough device
764 # This major number is temporary
767 units=`expr $i : 'pass\(.*\)'`
768 if [ -z "${units}" ]; then
772 while [ $i -lt $units ]; do
775 mknod $dname c $chr `unit2minor $i` root:operator
780 class=`expr $i : 'pty\(.*\)'`
783 1) offset=32 name=q;;
784 2) offset=64 name=r;;
785 3) offset=96 name=s;;
786 # Note that xterm (at least) only look at p-s.
787 4) offset=128 name=P;;
788 5) offset=160 name=Q;;
789 6) offset=192 name=R;;
790 7) offset=224 name=S;;
791 # This still leaves [tuTU].
792 *) echo bad unit for pty in: $i;;
798 while [ $i -lt 32 ]; do
799 # This was an awk substr() before.
800 c=$(echo 0123456789abcdefghijklmnopqrstuv |
801 dd bs=1 skip=$i count=1 2>/dev/null)
802 mknod tty$name$c c 5 $(($offset + $i))
803 mknod pty$name$c c 6 $(($offset + $i))
813 unit=`expr $i : '..\(.*\)'`
817 [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
818 mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
819 ln -f sa${unit}.ctl rsa${unit}.ctl
822 mknod sa${unit}.${m} c $chr \
823 `saminor 0 ${unit} ${m} 0` root:operator
824 ln -f sa${unit}.${m} rsa${unit}.${m}
825 mknod nsa${unit}.${m} c $chr \
826 `saminor 0 ${unit} ${m} 1` root:operator
827 ln -f nsa${unit}.${m} nrsa${unit}.${m}
828 mknod esa${unit}.${m} c $chr \
829 `saminor 0 ${unit} ${m} 2` root:operator
830 ln -f esa${unit}.${m} ersa${unit}.${m}
832 ln -f sa${unit}.0 sa${unit}
833 ln -f sa${unit}.0 rsa${unit}.0
834 ln -f sa${unit}.0 rsa${unit}
835 ln -f nsa${unit}.0 nsa${unit}
836 ln -f nsa${unit}.0 nrsa${unit}.0
837 ln -f nsa${unit}.0 nrsa${unit}
838 ln -f esa${unit}.0 esa${unit}
839 ln -f esa${unit}.0 ersa${unit}.0
840 ln -f esa${unit}.0 ersa${unit}
843 echo bad unit for tape in: $i
851 unit=`expr $i : '..\(.*\)'`
853 ch*) name=ch; chr=17;;
857 mknod ${name}${unit} c $chr $unit root:operator
860 echo bad unit for media changer in: $i
867 mknod ata c 159 0 root:operator
871 unit=`expr $i : '...\(.*\)'`
875 mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator
877 mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator
878 chmod 640 nast${unit}
881 echo bad unit for tape in: $i
889 units=`expr $i : '...\(.*\)t'`;
890 tracks=`expr $i : '.*t\(.*\)'`;
893 if [ -z "${units}" ]; then
896 if [ -z "${tracks}" ]; then
899 if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then
901 while [ $i -le $units ]; do
905 while [ $j -le ${tracks} ]; do
906 mknod ${dname}t$j c $chr \
907 $((($i * 8) + (65536 * $j))) \
914 echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
922 acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
923 cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
924 mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
925 scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
927 if [ -z "${units}" ]; then
930 if [ "${units}" -le 31 ]; then
932 while [ $i -le $units ]; do
935 mknod ${dname}a c $chr $(($i * 8)) root:operator
938 ln -f ${dname}a ${dname}c;;
940 mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator;;
947 echo "$i is invalid -- can't have more than 32 cd devices"
954 unit=`expr $i : '...\(.*\)'`
958 mknod wcd${unit}a c $chr $(($unit * 8 + 0)) root:operator
959 mknod wcd${unit}c c $chr $(($unit * 8 + 2)) root:operator
960 ln -f wcd${unit}a rwcd${unit}a
961 ln -f wcd${unit}c rwcd${unit}c
962 chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
965 echo bad unit for disk in: $i
973 unit=`expr $i : '...\(.*\)'`
977 mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator
978 chmod 640 rwst${unit}
985 unit=`expr $i : 'iic\(.*\)'`
986 mknod iic$unit c 105 `unit2minor $unit`
990 unit=`expr $i : 'smb\(.*\)'`
991 mknod smb$unit c 106 `unit2minor $unit`
995 unit=`expr $i : 'pcfclock\(.*\)'`
996 mknod pcfclock$unit c 140 `unit2minor $unit`
1000 unit=`expr $i : 'ppi\(.*\)'`
1001 mknod ppi$unit c 82 `unit2minor $unit`
1005 unit=`expr $i : 'pps\(.*\)'`
1006 mknod pps$unit c 89 `unit2minor $unit`
1010 mknod usb c 108 255 root:operator
1016 unit=`expr $i : 'usb\(.*\)'`
1017 mknod usb$unit c 108 `unit2minor $unit` root:operator
1023 unit=`expr $i : 'ucom\(.*\)'`
1024 minor=$(($unit + 128))
1025 minor=`unit2minor $(($unit + 128))`
1026 mknod ucom$unit c 138 $minor uucp:dialer
1032 unit=`expr $i : 'uhid\(.*\)'`
1033 mknod uhid$unit c 122 `unit2minor $unit` root:operator
1039 unit=`expr $i : 'ums\(.*\)'`
1040 mknod ums$unit c 111 `unit2minor $unit` root:operator
1045 unit=`expr $i : 'ulpt\(.*\)'`
1046 minor=`unit2minor $unit`
1047 mknod ulpt$unit c 113 $minor
1048 minor=`unit2minor $(($unit + 64))`
1049 mknod unlpt$unit c 113 $minor # and the 'no prime' version
1054 unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
1055 endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
1056 if [ -z "${unit}" ]; then
1057 echo $i - Invalid unit number
1059 if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
1060 mknod ugen$unit c 114 \
1061 `unit2minor $(($unit * 16))` root:operator
1063 while [ $i -lt 16 ]; do
1064 mknod ugen$unit.$i c 114 \
1065 `unit2minor $(($unit * 16 + $i))` root:operator
1069 minor=`unit2minor $(($unit * 16 + $endpoint))`
1070 mknod ugen$unit.$endpoint c 114 $minor root:operator
1077 unit=`expr $i : 'urio\(.*\)'`
1078 mknod urio$unit c 143 `unit2minor $unit` root:operator
1084 unit=`expr $i : 'uscanner\(.*\)'`
1085 mknod uscanner$unit c 156 `unit2minor $unit` root:operator
1091 unit=`expr $i : 'umodem\(.*\)'`
1092 mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer
1097 unit=`expr $i : 'lpt\(.*\)'`
1098 mknod lpt$unit c 16 `unit2minor $unit`
1099 mknod lpctl$unit c 16 `unit2minor $(($unit + 128))`
1102 # Use this to create virtual consoles for syscons, pcvt or codrv
1104 # use as MAKEDEV vtyNN to create NN entries
1107 units=`expr $i : 'vty\(.*\)'`
1109 while [ $i -lt $units ]; do
1110 mknod ttyv$(printf %01x $i) c $chr `unit2minor $i`
1113 ln -fs ttyv0 vga # XXX X still needs this pccons relic
1117 units=`expr $i : 'nmdm\(.*\)'`
1120 while [ $i -lt $units ]; do
1121 minor=`unit2minor $i`
1122 minor=$(($minor + $minor))
1123 mknod nmdm${i}A c $chr $minor
1124 mknod nmdm${i}B c $chr $(($minor + 1))
1130 nbpf=`expr $i : 'bpf\(.*\)$'`
1132 while [ $unit -le $nbpf ]; do
1133 mknod bpf$unit c 23 `unit2minor $unit`
1139 mknod speaker c 26 0
1144 unit_low=`expr $i : 'cua.*\(.\)$'`
1151 unit_high=`expr $i : 'cuaa\(.\).$'`
1152 m_high=`ttyminor $unit_high`
1155 unit=$unit_high$unit_low
1156 m=$(($m_high << 16 | `ttyminor $unit_low`))
1157 mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer
1158 mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer
1159 mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer
1164 mknod crypto c 70 0 root:operator
1169 unit=`expr $i : 'fwmem\(.*\)'`
1170 mknod fwmem$unit c 127 $((1<<24 | $unit)) root:operator
1171 chmod 660 fwmem$unit
1175 unit=`expr $i : 'fw\(.*\)'`
1176 mknod fw$unit c 127 $unit root:operator
1180 tty?|tty0?|ttyd?|ttyd??)
1181 unit_low=`expr $i : 'tty.*\(.\)$'`
1188 unit_high=`expr $i : 'ttyd\(.\).$'`
1189 m_high=`ttyminor $unit_high`
1192 unit=$unit_high$unit_low
1193 m=$(($m_high << 16 | `ttyminor $unit_low`))
1194 mknod ttyd$unit c 28 $m
1195 mknod ttyid$unit c 28 $(($m | 32))
1196 mknod ttyld$unit c 28 $(($m | 64))
1201 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1202 g h i j k l m n o p q r s t u v"
1204 card=`expr $i : 'cua.*\(.\)$'`
1205 for unit in $portlist
1207 minor=`ttyminor $unit`
1208 minor=$(($card * 65536 + $minor))
1210 mknod cuac$name c $major $(($minor + 128)) uucp:dialer
1211 mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer
1212 mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer
1218 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1219 g h i j k l m n o p q r s t u v"
1221 card=`expr $i : 'tty.*\(.\)$'`
1222 for unit in $portlist
1224 minor=`ttyminor $unit`
1225 minor=$(($card * 65536 + $minor))
1227 mknod ttyc$name c $major $minor
1228 mknod ttyic$name c $major $(($minor + 32))
1229 mknod ttylc$name c $major $(($minor + 64))
1233 # RISCom8 'rc' driver entries
1237 unit=`expr $i : 'cua.*\(.\)$'`
1239 mknod cuam$unit c 63 $(($m + 128)) uucp:dialer
1244 unit=`expr $i : 'tty.*\(.\)$'`
1246 mknod ttym$unit c 63 $m
1250 # Note: these are 'base 1' to match the numbers on the panels, and to match
1251 # the manual that comes with the system.
1254 nports=`expr $i : 'ttyA\(.*\)$'`
1256 while [ $port -le $nports ]; do
1257 minor=$(($port - 1))
1258 name=$(printf %02d $port)
1259 mknod ttyA$name c $major $minor
1260 mknod ttyiA$name c $major $(($minor + 65536))
1261 mknod ttylA$name c $major $(($minor + 131072))
1264 # For the user-mode control program, 'sicontrol'
1265 mknod si_control c 68 262144
1271 nports=`expr $i : 'cuaA\(.*\)$'`
1273 while [ $port -le $nports ]; do
1274 minor=$(($port - 1))
1275 name=$(printf %02d $port)
1276 mknod cuaA$name c $major $(($minor + 128)) uucp:dialer
1277 mknod cuaiA$name c $major $(($minor + 128 + 65536)) \
1279 mknod cualA$name c $major $(($minor + 128 + 131072)) \
1286 # Alpha AS8[24]00 (TurboLaser) console.
1288 unit=`expr $i : 'zs.*\(.\)$'`
1290 mknod zs$unit c 135 $m
1293 # Digiboard PC/?? 16 port card.
1294 # The current scheme of minor numbering is:
1296 # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
1298 # CARD bitfield in future versions may be extended to 3 bits.
1303 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1305 card=`expr $i : 'tty.*\(.\)$'`
1306 for unit in $portlist
1308 minor=`ttyminor $unit`
1309 minor=$(($card * 65536 + $minor))
1311 mknod ttyD$name c $major $minor
1312 mknod ttyiD$name c $major $(($minor + 32))
1313 mknod ttylD$name c $major $(($minor + 64))
1319 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1321 card=`expr $i : 'cua.*\(.\)$'`
1322 for unit in $portlist
1324 minor=`ttyminor $unit`
1325 minor=$(($card * 65536 + $minor))
1327 mknod cuaD$name c $major $(($minor + 128)) uucp:dialer
1328 mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer
1329 mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer
1334 # Stallion multi serial cards (stl and stli drivers)
1336 # These drivers reserve 64 minor devices per board, even if the board
1337 # supports only 4 devices. We default to creating only 8 of the 64 devices
1338 # to keep /dev from getting too large (which => slow). The last part of the
1339 # arg is the board number to create ports for. So:
1340 # ttyE0 will create 8 dialin ports ttyE0-ttyE7, plus ttyiE* and ttylE*
1341 # cuaE0 will create 8 dialout ports cuaE0-cuaE7, plus cuaiE* and cualE*
1342 # ttyE1 will create 8 dialin ports ttyE64-ttyE71, plus ttyiE* and ttylE*
1344 # If you have EasyConnect 8/32 or 8/64 cards, you will need to change the
1345 # definition of "maxport" below to get nodes for the full 32 or 64
1348 # Note that the mapping of minor device numbers (with the hole between
1349 # 32-64k) is a bit odd to keep compatibility with ttyd? for
1350 # lock/initial devices.
1351 # Minor device field for the ports is
1352 # card{3} unused{4} unit-msb{1} unused{8} callout{1} lock{1} init{1} unit-lsbs{5}
1353 # for the mem device is
1355 # (For stl, there is only 1 mem device per system; for stli, one per board)
1358 stallion 72 E `expr $i : 'tty.*\(.\)$'` 0
1361 stallion 72 E `expr $i : 'cua.*\(.\)$'` 1
1364 card=`expr $i : 'stl\(.\)$'`
1365 stallion 72 E $card 0
1366 stallion 72 E $card 1
1370 stallion 75 F `expr $i : 'tty.*\(.\)$'` 0
1373 stallion 75 F `expr $i : 'cua.*\(.\)$'` 1
1376 card=`expr $i : 'stl\(.\)$'`
1377 stallion 75 F $card 0
1378 stallion 75 F $card 1
1382 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1383 modulelist="a b c d"
1385 card=`expr $i : 'tty.*\(.\)$'`
1386 for unit in $modulelist
1388 moduleminor=`ttyminor $unit`
1389 moduleminor=$(($moduleminor % 10 * 16))
1392 for unit in $portlist
1394 minor=`ttyminor $unit`
1395 minor=$(($card * 65536 + $minor + $moduleminor))
1396 name=$card$modulename$unit
1398 mknod ttyM$name c $major $minor
1399 mknod ttyiM$name c $major $(($minor + 64))
1400 mknod ttylM$name c $major $(($minor + 128))
1407 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1408 modulelist="a b c d"
1410 card=`expr $i : 'cua.*\(.\)$'`
1411 for unit in $modulelist
1413 moduleminor=`ttyminor $unit`
1414 moduleminor=$(($moduleminor % 10 * 16))
1417 for unit in $portlist
1419 minor=`ttyminor $unit`
1420 minor=$(($card * 65536 + $minor + $moduleminor))
1421 name=$card$modulename$unit
1423 mknod cuaM$name c $major $(($minor + 262144)) \
1425 mknod cuaiM$name c $major $(($minor + 64 + 262144)) \
1427 mknod cualM$name c $major $(($minor + 128 + 262144)) \
1437 MINOR=$(($BOARD * 65536))
1439 dmesg | while read first rest; do
1447 rm -f ttyR* ttyiR* ttylR*
1448 for i in $controllers; do
1450 dmesg | while read first bar ports rest; do
1458 echo -n "Creating $ndevices devices for $i: "
1460 while [ $dev -lt $ndevices ]; do
1461 mknod ttyR$Rnum c $major $MINOR
1462 mknod ttyiR$Rnum c $major $(($MINOR + 32))
1463 mknod ttylR$Rnum c $major $(($MINOR + 64))
1465 MINOR=$(($MINOR + 1))
1468 BOARD=$(($BOARD + 1))
1469 MINOR=$(($BOARD * 65536))
1477 MINOR=$(($BOARD * 65536))
1479 dmesg | while read first rest; do
1487 rm -f cuaR* cuaiR* cualR*
1488 for i in $controllers; do
1490 dmesg | while read first bar ports rest; do
1498 echo -n "Creating $ndevices devices for $i: "
1500 while [ $dev -lt $ndevices ]; do
1501 mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
1502 mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
1504 mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \
1507 MINOR=$(($MINOR + 1))
1510 BOARD=$(($BOARD + 1))
1511 MINOR=$(($BOARD * 65536))
1517 unit=`expr $i : 'mse\(.*\)'`
1519 # non-blocking for X11
1520 mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))`
1524 unit=`expr $i : 'psm\(.*\)'`
1526 # non-blocking for X11
1527 mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))`
1531 name=`expr $i : 'mouse\(.*\)'`
1532 if [ ! -c $name ]; then
1533 $0 $name # make the appropriate device
1539 mknod pcaudio c 24 0
1540 mknod pcaudioctl c 24 128
1544 mknod socksys c 41 0
1547 chmod 666 socksys nfsd spx
1552 # changes from Linux voxware
1553 # minor Linux FreeBSD
1554 # 8 sequencer2 (aka music0) music0
1555 # 17 patmgr0 sequencer1
1556 # 33 patmgr1 sequencer2
1559 unit=`expr $i : 'snd\(.*\)'`
1562 # XXX write this less verbosely, like std
1563 snd_security_hole=0 # XXX
1564 umask $snd_security_hole
1566 ln -fs mixer$unit mixer
1567 ln -fs sequencer$unit sequencer
1569 ln -fs audio$unit audio
1570 ln -fs dspW$unit dspW
1571 ln -fs music$unit music
1573 ln -fs dsp$unit.0 dsp$unit
1574 ln -fs audio$unit.0 audio$unit
1575 ln -fs dspW$unit.0 dspW$unit
1577 mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))`
1578 mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))`
1579 mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))`
1583 minor=$(($chn * 65536 + $unit * 16))
1584 mknod dsp$unit.$chn c $chr $(($minor + 3))
1585 mknod audio$unit.$chn c $chr $(($minor + 4))
1586 mknod dspW$unit.$chn c $chr $(($minor + 5))
1589 mknod sndstat c $chr 6
1590 # minor number 7 is unused
1591 mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))`
1592 mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))`
1593 # minor numbers 10-15 are unused
1598 mknod vatio c 25 128
1603 unit=`expr $i : 'gsc\(.*\)'`
1604 mknod gsc${unit} c 47 `unit2minor $unit`
1605 mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))`
1606 mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))`
1607 mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))`
1608 chmod 666 gsc${unit}*
1612 mknod apm c 39 0 root:operator
1617 mknod apmctl c 39 8 root:operator
1622 unit=`expr $i : 'card\(.*\)'`
1624 mknod card$unit c $chr `unit2minor $unit`
1630 *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
1631 *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
1632 *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
1633 *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
1636 ttyy?) unit=$(($unit + 16));;
1637 ttyz?) unit=$(($unit + 32));;
1643 mknod cronyx c 42 63
1647 mknod joy0 c 51 0 root:operator
1648 mknod joy1 c 51 1 root:operator
1658 unit=`expr $i : 'ctx\(.*\)'`
1659 mknod ctx$unit c 40 `unit2minor $unit`
1664 unit=`expr $i : 'meteor\(.*\)'`
1665 mknod meteor$unit c 67 `unit2minor $unit`
1666 chmod 444 meteor$unit
1670 unit=`expr $i : 'bktr\(.*\)'`
1671 mknod bktr$unit c 92 `unit2minor $unit`
1672 mknod tuner$unit c 92 `unit2minor $((16 + $unit))`
1673 mknod vbi$unit c 92 `unit2minor $((32 + $unit))`
1674 chmod 444 bktr$unit tuner$unit vbi$unit
1678 ntun=`expr $i : 'tun\(.*\)$'`
1680 while [ $unit -le $ntun ]; do
1681 mknod tun$unit c 52 `unit2minor $unit`
1687 ntap=`expr $i : 'tap\(.*\)$'`
1689 while [ $unit -le $ntap ]; do
1690 mknod tap$unit c 149 `unit2minor $unit` root:network
1696 mknod sysmouse c 12 128
1697 mknod consolectl c 12 255
1701 mknod jogdial c 160 0
1705 unit=`expr $i : 'snp\(.*\)'`
1706 mknod snp$unit c 53 `unit2minor $unit`
1709 # dufault@hda.com: If I do much more work on other A-D boards
1710 # then eventually we'll have a "ad" and "dio" interface and some of these
1711 # "labpcaio" ones will be gone.
1712 # labpcaio: D-A and A-D.
1713 # labpcdio: Digital in and Digital out.
1720 unit=`expr $i : 'labpcaio\(.*\)'`
1721 all="0 1 2 3 4 5 6 7"
1726 unit=`expr $i : 'labpcdio\(.*\)'`
1731 die 3 "Don't know LabPC type $i"
1734 if [ -z "${unit}" ]; then
1739 mknod $name$unit c 66 $(($offset + $unit))
1744 mknod $name$i c 66 $(($offset + $i))
1748 echo "No such LabPC unit: $unit"
1755 mknod perfmon c 2 32 root:kmem
1762 mknod ipstate c 79 2
1767 mknod elan-mmcr c 100 0 # XXX local major
1772 unit=`expr $i : 'kbd\(.*\)'`
1774 mknod kbd$unit c $chr `unit2minor $unit`
1786 unit=`expr $i : 'i4brbch\(.*\)'`
1787 mknod i4brbch$unit c 57 `unit2minor $unit`
1792 unit=`expr $i : 'i4bteld\(.*\)'`
1793 mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))`
1797 unit=`expr $i : 'i4btel\(.*\)'`
1798 mknod i4btel$unit c 56 `unit2minor $unit`
1802 unit=`expr $i : 'i4btrc\(.*\)'`
1803 mknod i4btrc$unit c 59 `unit2minor $unit`
1807 unit=`expr $i : 'aac\(.*\)'`
1808 mknod aac$unit c 150 `unit2minor $unit`
1809 ln -fs aac$unit afa$unit
1810 ln -fs aac$unit hpn$unit
1814 unit=`expr $i : 'mlx\(.*\)'`
1815 mknod mlx$unit c 130 `unit2minor $unit`
1819 unit=`expr $i : 'amr\(.*\)'`
1820 mknod amr$unit c 132 `unit2minor $unit`
1824 unit=`expr $i : 'ips\(.*\)'`
1825 mknod mlx$unit c 175 `unit2minor $unit`
1829 unit=`expr $i : 'ciss\(.*\)'`
1830 mknod ciss$unit c 166 `unit2minor $unit`
1834 mknod agpgart c 148 0
1838 unit=`expr $i : 'twe\(.*\)'`
1839 mknod twe$unit c 146 `unit2minor $unit`
1843 unit=`expr $i : 'tw\(.*\)'`
1844 mknod tw$unit c 19 `unit2minor $unit` root:operator
1848 unit=`expr $i : 'cfs\(.*\)'`
1849 mknod cfs$unit c 93 $unit root:operator
1853 unit=`expr $i : 'nsmb\(.*\)'`
1854 mknod nsmb$unit c 144 $unit
1858 umask 0 # XXX should be elsewhere
1864 echo $i - no such device name