Use a normal malloc() for PCB allocations instead of the really aweful mbuf
[dragonfly.git] / sys / sys / param.h
1 /*-
2  * Copyright (c) 1982, 1986, 1989, 1993
3  *      The Regents of the University of California.  All rights reserved.
4  * (c) UNIX System Laboratories, Inc.
5  * All or some portions of this file are derived from material licensed
6  * to the University of California by American Telephone and Telegraph
7  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
8  * the permission of UNIX System Laboratories, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. All advertising materials mentioning features or use of this software
19  *    must display the following acknowledgement:
20  *      This product includes software developed by the University of
21  *      California, Berkeley and its contributors.
22  * 4. Neither the name of the University nor the names of its contributors
23  *    may be used to endorse or promote products derived from this software
24  *    without specific prior written permission.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
27  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
30  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
31  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
32  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
33  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
34  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
35  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36  * SUCH DAMAGE.
37  *
38  *      @(#)param.h     8.3 (Berkeley) 4/4/95
39  * $FreeBSD: src/sys/sys/param.h,v 1.61.2.38 2003/05/22 17:12:01 fjoe Exp $
40  * $DragonFly: src/sys/sys/param.h,v 1.13 2004/03/30 19:14:13 dillon Exp $
41  */
42
43 #ifndef _SYS_PARAM_H_
44 #define _SYS_PARAM_H_
45
46 #define BSD     200307          /* XXX kern.osrevision */
47 #define BSD4_3  1               /* XXX obsolete */
48 #define BSD4_4  1               /* XXX obsolete */
49
50 /*
51  * __DragonFly_version number.   Note that the name and comment are pattern
52  * searched from conf/newvers.sh.
53  *
54  * Version changes should be documented in:
55  *      doc/en_US.ISO8859-1/books/porters-handbook/book.sgml
56  */
57 #undef __DragonFly_version
58 #define __DragonFly_version 100000      /* Master, propagated to newvers */
59
60 /* 
61  * __FreeBSD_version numbers for source compatibility.  This is temporary
62  * along with the __FreeBSD__ define in gcc.
63  */
64 #undef __FreeBSD_version
65 #define __FreeBSD_version 480101
66
67 #ifndef NULL
68 #define NULL    0
69 #endif
70
71 #ifndef LOCORE
72 #include <sys/types.h>
73 #endif
74
75 /*
76  * Machine-independent constants (some used in following include files).
77  * Redefined constants are from POSIX 1003.1 limits file.
78  *
79  * MAXCOMLEN should be >= sizeof(ac_comm) (see <acct.h>)
80  * MAXLOGNAME should be == UT_NAMESIZE+1 (see <utmp.h>)
81  */
82 #include <sys/syslimits.h>
83
84 #define MAXCOMLEN       16              /* max command name remembered */
85 #define MAXINTERP       32              /* max interpreter file name length */
86 #define MAXLOGNAME      17              /* max login name length (incl. NUL) */
87 #define MAXUPRC         CHILD_MAX       /* max simultaneous processes */
88 #define NCARGS          ARG_MAX         /* max bytes for an exec function */
89 #define NGROUPS         NGROUPS_MAX     /* max number groups */
90 #define NOFILE          OPEN_MAX        /* max open files per process */
91 #define NOGROUP         65535           /* marker for empty group set member */
92 #define MAXHOSTNAMELEN  256             /* max hostname size */
93
94 /* More types and definitions used throughout the kernel. */
95 #ifdef _KERNEL
96 #include <sys/cdefs.h>
97 #include <sys/errno.h>
98 #include <sys/time.h>
99
100 #define FALSE   0
101 #define TRUE    1
102 #endif
103
104 #ifndef _KERNEL
105 /* Signals. */
106 #include <sys/signal.h>
107 #endif
108
109 /* Machine type dependent parameters. */
110 #include <machine/param.h>
111 #ifndef _KERNEL
112 #include <machine/limits.h>
113 #endif
114
115 /*
116  * Priorities.  Note that with 32 run queues, differences less than 4 are
117  * insignificant.
118  */
119 #define MAXPRI  127             /* Priorities range from 0 through MAXPRI. */
120 #define PPAUSE                  40
121 #define PRIMASK 127
122 #define PRIBASE_REALTIME        0
123 #define PRIBASE_NORMAL          128
124 #define PRIBASE_IDLE            256
125 #define PRIBASE_THREAD          384     /* huh? */
126
127 #define PCATCH          0x0100  /* OR'd with pri for tsleep to check signals */
128 #define PUSRFLAG1       0x0200  /* Subsystem specific flag */
129 #define PNORESCHED      0x0400  /* Do not force a reschedule on wakeup */
130
131 #define NZERO   0               /* default "nice" */
132
133 #define NBPW    sizeof(int)     /* number of bytes per word (integer) */
134
135 #define CMASK   022             /* default file mask: S_IWGRP|S_IWOTH */
136 #ifdef _KERNEL
137 #define NODEV   (dev_t)(-1)     /* non-existent device */
138 #define NOUDEV  (udev_t)(-1)    /* non-existent device */
139 #define NOMAJ   256             /* non-existent device */
140 #else
141 #define NODEV   (dev_t)(-1)     /* non-existent device */
142 #endif
143
144 /*
145  * Clustering of hardware pages on machines with ridiculously small
146  * page sizes is done here.  The paging subsystem deals with units of
147  * CLSIZE pte's describing PAGE_SIZE (from machine/machparam.h) pages each.
148  */
149 #if 0
150 #define CLBYTES         (CLSIZE*PAGE_SIZE)
151 #endif
152
153 #define CBLOCK  128             /* Clist block size, must be a power of 2. */
154 #define CBQSIZE (CBLOCK/NBBY)   /* Quote bytes/cblock - can do better. */
155                                 /* Data chars/clist. */
156 #define CBSIZE  (CBLOCK - sizeof(struct cblock *) - CBQSIZE)
157 #define CROUND  (CBLOCK - 1)    /* Clist rounding. */
158
159 /*
160  * File system parameters and macros.
161  *
162  * MAXBSIZE -   Filesystems are made out of blocks of at most MAXBSIZE bytes
163  *              per block.  MAXBSIZE may be made larger without effecting
164  *              any existing filesystems as long as it does not exceed MAXPHYS,
165  *              and may be made smaller at the risk of not being able to use
166  *              filesystems which require a block size exceeding MAXBSIZE.
167  *
168  * BKVASIZE -   Nominal buffer space per buffer, in bytes.  BKVASIZE is the
169  *              minimum KVM memory reservation the kernel is willing to make.
170  *              Filesystems can of course request smaller chunks.  Actual 
171  *              backing memory uses a chunk size of a page (PAGE_SIZE).
172  *
173  *              If you make BKVASIZE too small you risk seriously fragmenting
174  *              the buffer KVM map which may slow things down a bit.  If you
175  *              make it too big the kernel will not be able to optimally use 
176  *              the KVM memory reserved for the buffer cache and will wind 
177  *              up with too-few buffers.
178  *
179  *              The default is 16384, roughly 2x the block size used by a
180  *              normal UFS filesystem.
181  */
182 #define MAXBSIZE        65536   /* must be power of 2 */
183 #define BKVASIZE        16384   /* must be power of 2 */
184 #define BKVAMASK        (BKVASIZE-1)
185 #define MAXFRAG         8
186
187 /*
188  * MAXPATHLEN defines the longest permissible path length after expanding
189  * symbolic links. It is used to allocate a temporary buffer from the buffer
190  * pool in which to do the name expansion, hence should be a power of two,
191  * and must be less than or equal to MAXBSIZE.  MAXSYMLINKS defines the
192  * maximum number of symbolic links that may be expanded in a path name.
193  * It should be set high enough to allow all legitimate uses, but halt
194  * infinite loops reasonably quickly.
195  */
196 #define MAXPATHLEN      PATH_MAX
197 #define MAXSYMLINKS     32
198
199 /* Bit map related macros. */
200 #define setbit(a,i)     ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
201 #define clrbit(a,i)     ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
202 #define isset(a,i)      ((a)[(i)/NBBY] & (1<<((i)%NBBY)))
203 #define isclr(a,i)      (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
204
205 /* Macros for counting and rounding. */
206 #ifndef howmany
207 #define howmany(x, y)   (((x)+((y)-1))/(y))
208 #endif
209 #define rounddown(x, y) (((x)/(y))*(y))
210 #define roundup(x, y)   ((((x)+((y)-1))/(y))*(y))  /* to any y */
211 #define roundup2(x, y)  (((x)+((y)-1))&(~((y)-1))) /* if y is powers of two */
212 #define powerof2(x)     ((((x)-1)&(x))==0)
213
214 /* Macros for min/max. */
215 #define MIN(a,b) (((a)<(b))?(a):(b))
216 #define MAX(a,b) (((a)>(b))?(a):(b))
217
218 /*
219  * Constants for setting the parameters of the kernel memory allocator.
220  *
221  * 2 ** MINBUCKET is the smallest unit of memory that will be
222  * allocated. It must be at least large enough to hold a pointer.
223  *
224  * Units of memory less or equal to MAXALLOCSAVE will permanently
225  * allocate physical memory; requests for these size pieces of
226  * memory are quite fast. Allocations greater than MAXALLOCSAVE must
227  * always allocate and free physical memory; requests for these
228  * size allocations should be done infrequently as they will be slow.
229  *
230  * Constraints: PAGE_SIZE <= MAXALLOCSAVE <= 2 ** (MINBUCKET + 14), and
231  * MAXALLOCSIZE must be a power of two.
232  */
233 #if defined(__alpha__)
234 #define MINBUCKET       5               /* 5 => min allocation of 32 bytes */
235 #else
236 #define MINBUCKET       4               /* 4 => min allocation of 16 bytes */
237 #endif
238 #define MAXALLOCSAVE    (2 * PAGE_SIZE)
239
240 /*
241  * Scale factor for scaled integers used to count %cpu time and load avgs.
242  *
243  * The number of CPU `tick's that map to a unique `%age' can be expressed
244  * by the formula (1 / (2 ^ (FSHIFT - 11))).  The maximum load average that
245  * can be calculated (assuming 32 bits) can be closely approximated using
246  * the formula (2 ^ (2 * (16 - FSHIFT))) for (FSHIFT < 15).
247  *
248  * For the scheduler to maintain a 1:1 mapping of CPU `tick' to `%age',
249  * FSHIFT must be at least 11; this gives us a maximum load avg of ~1024.
250  */
251 #define FSHIFT  11              /* bits to right of fixed binary point */
252 #define FSCALE  (1<<FSHIFT)
253
254 #define dbtoc(db)                       /* calculates devblks to pages */ \
255         ((db + (ctodb(1) - 1)) >> (PAGE_SHIFT - DEV_BSHIFT))
256  
257 #define ctodb(db)                       /* calculates pages to devblks */ \
258         ((db) << (PAGE_SHIFT - DEV_BSHIFT))
259
260
261 /*
262  * Make this available for most of the kernel.  There were too many
263  * things that included sys/systm.h just for panic().
264  */
265 #ifdef _KERNEL
266 void    panic (const char *, ...) __dead2 __printflike(1, 2);
267 #endif
268
269 #endif  /* _SYS_PARAM_H_ */