inet6/pim: Return IPPROTO_DONE if the mbuf is freed.
[dragonfly.git] / sys / netinet6 / udp6_output.c
1 /*      $FreeBSD: src/sys/netinet6/udp6_output.c,v 1.1.2.6 2003/01/23 21:06:47 sam Exp $        */
2 /*      $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $    */
3
4 /*
5  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the name of the project nor the names of its contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30  * SUCH DAMAGE.
31  */
32
33 /*
34  * Copyright (c) 1982, 1986, 1989, 1993
35  *      The Regents of the University of California.  All rights reserved.
36  *
37  * Redistribution and use in source and binary forms, with or without
38  * modification, are permitted provided that the following conditions
39  * are met:
40  * 1. Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  * 2. Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in the
44  *    documentation and/or other materials provided with the distribution.
45  * 3. Neither the name of the University nor the names of its contributors
46  *    may be used to endorse or promote products derived from this software
47  *    without specific prior written permission.
48  *
49  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
59  * SUCH DAMAGE.
60  *
61  *      @(#)udp_var.h   8.1 (Berkeley) 6/10/93
62  */
63
64 #include "opt_ipsec.h"
65 #include "opt_inet.h"
66 #include "opt_inet6.h"
67
68 #include <sys/param.h>
69 #include <sys/malloc.h>
70 #include <sys/mbuf.h>
71 #include <sys/protosw.h>
72 #include <sys/socket.h>
73 #include <sys/socketvar.h>
74 #include <sys/sysctl.h>
75 #include <sys/errno.h>
76 #include <sys/stat.h>
77 #include <sys/systm.h>
78 #include <sys/proc.h>
79 #include <sys/priv.h>
80 #include <sys/syslog.h>
81
82 #include <net/if.h>
83 #include <net/route.h>
84 #include <net/if_types.h>
85
86 #include <netinet/in.h>
87 #include <netinet/in_var.h>
88 #include <netinet/in_systm.h>
89 #include <netinet/ip.h>
90 #include <netinet/ip_var.h>
91 #include <netinet/in_pcb.h>
92 #include <netinet/udp.h>
93 #include <netinet/udp_var.h>
94 #include <netinet/ip6.h>
95 #include <netinet6/ip6_var.h>
96 #include <netinet6/in6_pcb.h>
97 #include <netinet6/udp6_var.h>
98 #include <netinet/icmp6.h>
99 #include <netinet6/ip6protosw.h>
100
101 #ifdef IPSEC
102 #include <netinet6/ipsec.h>
103 #ifdef INET6
104 #include <netinet6/ipsec6.h>
105 #endif
106 #endif /* IPSEC */
107
108 #include <net/net_osdep.h>
109
110 /*
111  * UDP protocol inplementation.
112  * Per RFC 768, August, 1980.
113  */
114
115 #define in6pcb          inpcb
116 #define udp6stat        udp_stat
117 #define udp6s_opackets  udps_opackets
118
119 int
120 udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
121             struct mbuf *control, struct thread *td)
122 {
123         u_int32_t ulen = m->m_pkthdr.len;
124         u_int32_t plen = sizeof(struct udphdr) + ulen;
125         struct ip6_hdr *ip6;
126         struct udphdr *udp6;
127         struct in6_addr *laddr, *faddr;
128         u_short fport;
129         int error = 0;
130         struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
131         int priv;
132         int hlen = sizeof(struct ip6_hdr);
133         struct sockaddr_in6 tmp;
134
135         priv = !priv_check(td, PRIV_ROOT);      /* 1 if privileged, 0 if not */
136         if (control) {
137                 if ((error = ip6_setpktoptions(control, &opt,
138                     in6p->in6p_outputopts, 
139                     IPPROTO_UDP, priv)) != 0)
140                         goto release;
141                 in6p->in6p_outputopts = &opt;
142         }
143
144         if (addr6) {
145                 /*
146                  * IPv4 version of udp_output calls in_pcbconnect in this case,
147                  * which needs splnet and affects performance.
148                  * Since we saw no essential reason for calling in_pcbconnect,
149                  * we get rid of such kind of logic, and call in6_selectsrc
150                  * and in6_pcbsetlport in order to fill in the local address
151                  * and the local port.
152                  */
153                 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
154
155                 /* Caller should have rejected the v4-mapped address */
156                 KASSERT(!IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr),
157                     ("v4-mapped address"));
158
159                 if (sin6->sin6_port == 0) {
160                         error = EADDRNOTAVAIL;
161                         goto release;
162                 }
163
164                 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
165                         /* how about ::ffff:0.0.0.0 case? */
166                         error = EISCONN;
167                         goto release;
168                 }
169                 if (!prison_remote_ip(td, addr6)) {
170                         error = EAFNOSUPPORT; /* IPv4 only jail */
171                         goto release;
172                 }
173
174                 /* protect *sin6 from overwrites */
175                 tmp = *sin6;
176                 sin6 = &tmp;
177
178                 faddr = &sin6->sin6_addr;
179                 fport = sin6->sin6_port; /* allow 0 port */
180
181                 /* KAME hack: embed scopeid */
182                 if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
183                         error = EINVAL;
184                         goto release;
185                 }
186
187                 laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
188                                       in6p->in6p_moptions,
189                                       &in6p->in6p_route,
190                                       &in6p->in6p_laddr, &error, NULL);
191                 if (laddr == NULL) {
192                         if (error == 0)
193                                 error = EADDRNOTAVAIL;
194                         goto release;
195                 }
196                 if (in6p->in6p_lport == 0 &&
197                     (error = in6_pcbsetlport(laddr, in6p, td)) != 0)
198                         goto release;
199         } else {
200                 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
201                         error = ENOTCONN;
202                         goto release;
203                 }
204
205                 /* Connection to v4-mapped address should have been rejected */
206                 KASSERT(!IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr),
207                     ("bound to v4-mapped address"));
208
209                 laddr = &in6p->in6p_laddr;
210                 faddr = &in6p->in6p_faddr;
211                 fport = in6p->in6p_fport;
212         }
213
214         /*
215          * Calculate data length and get a mbuf
216          * for UDP and IP6 headers.
217          */
218         M_PREPEND(m, hlen + sizeof(struct udphdr), M_NOWAIT);
219         if (m == NULL) {
220                 error = ENOBUFS;
221                 goto release;
222         }
223
224         /*
225          * Stuff checksum and output datagram.
226          */
227         udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
228         udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
229         udp6->uh_dport = fport;
230         if (plen <= 0xffff)
231                 udp6->uh_ulen = htons((u_short)plen);
232         else
233                 udp6->uh_ulen = 0;
234         udp6->uh_sum = 0;
235
236         ip6 = mtod(m, struct ip6_hdr *);
237         ip6->ip6_flow   = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
238         ip6->ip6_vfc    &= ~IPV6_VERSION_MASK;
239         ip6->ip6_vfc    |= IPV6_VERSION;
240 #if 0                           /* ip6_plen will be filled in ip6_output. */
241         ip6->ip6_plen   = htons((u_short)plen);
242 #endif
243         ip6->ip6_nxt    = IPPROTO_UDP;
244         ip6->ip6_hlim   = in6_selecthlim(in6p,
245                                          in6p->in6p_route.ro_rt ?
246                                          in6p->in6p_route.ro_rt->rt_ifp : NULL);
247         ip6->ip6_src    = *laddr;
248         ip6->ip6_dst    = *faddr;
249
250         if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
251                         sizeof(struct ip6_hdr), plen)) == 0) {
252                 udp6->uh_sum = 0xffff;
253         }
254
255         udp6stat.udp6s_opackets++;
256         error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route, 0,
257             in6p->in6p_moptions, NULL, in6p);
258         goto releaseopt;
259
260 release:
261         m_freem(m);
262
263 releaseopt:
264         if (control) {
265                 ip6_clearpktopts(in6p->in6p_outputopts, -1);
266                 in6p->in6p_outputopts = stickyopt;
267                 m_freem(control);
268         }
269         return (error);
270 }