3 .\" Author: Tatu Ylonen <ylo@cs.hut.fi>
4 .\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
5 .\" All rights reserved
7 .\" As far as I am concerned, the code I have written for this software
8 .\" can be used freely for any purpose. Any derived versions of this
9 .\" software must be clearly marked as such, and if the derived work is
10 .\" incompatible with the protocol description in the RFC file, it must be
11 .\" called by a name other than "ssh" or "Secure Shell".
13 .\" Copyright (c) 1999,2000 Markus Friedl. All rights reserved.
14 .\" Copyright (c) 1999 Aaron Campbell. All rights reserved.
15 .\" Copyright (c) 1999 Theo de Raadt. All rights reserved.
17 .\" Redistribution and use in source and binary forms, with or without
18 .\" modification, are permitted provided that the following conditions
20 .\" 1. Redistributions of source code must retain the above copyright
21 .\" notice, this list of conditions and the following disclaimer.
22 .\" 2. Redistributions in binary form must reproduce the above copyright
23 .\" notice, this list of conditions and the following disclaimer in the
24 .\" documentation and/or other materials provided with the distribution.
26 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
27 .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
28 .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
29 .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
30 .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
31 .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
32 .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
33 .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
34 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
35 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 .\" $OpenBSD: ssh.1,v 1.194 2004/08/12 21:41:13 jakob Exp $
38 .Dd September 25, 1999
43 .Nd OpenSSH SSH client (remote login program)
46 .Op Fl 1246AaCfgkMNnqsTtVvXxY
47 .Op Fl b Ar bind_address
48 .Op Fl c Ar cipher_spec
51 .Op Fl e Ar escape_char
52 .Op Fl F Ar configfile
53 .Op Fl i Ar identity_file
63 .Op Fl l Ar login_name
78 .Oo Ar user Ns @ Oc Ns Ar hostname
82 (SSH client) is a program for logging into a remote machine and for
83 executing commands on a remote machine.
84 It is intended to replace rlogin and rsh,
85 and provide secure encrypted communications between
86 two untrusted hosts over an insecure network.
87 X11 connections and arbitrary TCP/IP ports
88 can also be forwarded over the secure channel.
91 connects and logs into the specified
97 his/her identity to the remote machine using one of several methods
98 depending on the protocol version used.
104 is executed on the remote host instead of a login shell.
105 .Ss SSH protocol version 1
106 First, if the machine the user logs in from is listed in
109 .Pa /etc/shosts.equiv
110 on the remote machine, and the user names are
111 the same on both sides, the user is immediately permitted to log in.
116 exists in the user's home directory on the
117 remote machine and contains a line containing the name of the client
118 machine and the name of the user on that machine, the user is
120 This form of authentication alone is normally not
121 allowed by the server because it is not secure.
123 The second authentication method is the
127 method combined with RSA-based host authentication.
128 It means that if the login would be permitted by
131 .Pa /etc/hosts.equiv ,
133 .Pa /etc/shosts.equiv ,
134 and if additionally the server can verify the client's
136 .Pa /etc/ssh/ssh_known_hosts
138 .Pa $HOME/.ssh/known_hosts
141 section), only then is login permitted.
142 This authentication method closes security holes due to IP
143 spoofing, DNS spoofing and routing spoofing.
144 [Note to the administrator:
145 .Pa /etc/hosts.equiv ,
147 and the rlogin/rsh protocol in general, are inherently insecure and should be
148 disabled if security is desired.]
150 As a third authentication method,
152 supports RSA based authentication.
153 The scheme is based on public-key cryptography: there are cryptosystems
154 where encryption and decryption are done using separate keys, and it
155 is not possible to derive the decryption key from the encryption key.
156 RSA is one such system.
157 The idea is that each user creates a public/private
158 key pair for authentication purposes.
159 The server knows the public key, and only the user knows the private key.
162 .Pa $HOME/.ssh/authorized_keys
163 lists the public keys that are permitted for logging in.
164 When the user logs in, the
166 program tells the server which key pair it would like to use for
168 The server checks if this key is permitted, and if so,
169 sends the user (actually the
171 program running on behalf of the user) a challenge, a random number,
172 encrypted by the user's public key.
173 The challenge can only be decrypted using the proper private key.
174 The user's client then decrypts the challenge using the private key,
175 proving that he/she knows the private key
176 but without disclosing it to the server.
179 implements the RSA authentication protocol automatically.
180 The user creates his/her RSA key pair by running
182 This stores the private key in
183 .Pa $HOME/.ssh/identity
184 and stores the public key in
185 .Pa $HOME/.ssh/identity.pub
186 in the user's home directory.
187 The user should then copy the
190 .Pa $HOME/.ssh/authorized_keys
191 in his/her home directory on the remote machine (the
193 file corresponds to the conventional
195 file, and has one key
196 per line, though the lines can be very long).
197 After this, the user can log in without giving the password.
198 RSA authentication is much more secure than
202 The most convenient way to use RSA authentication may be with an
203 authentication agent.
206 for more information.
208 If other authentication methods fail,
210 prompts the user for a password.
211 The password is sent to the remote
212 host for checking; however, since all communications are encrypted,
213 the password cannot be seen by someone listening on the network.
214 .Ss SSH protocol version 2
215 When a user connects using protocol version 2,
216 similar authentication methods are available.
217 Using the default values for
218 .Cm PreferredAuthentications ,
219 the client will try to authenticate first using the hostbased method;
220 if this method fails, public key authentication is attempted,
221 and finally if this method fails, keyboard-interactive and
222 password authentication are tried.
224 The public key method is similar to RSA authentication described
225 in the previous section and allows the RSA or DSA algorithm to be used:
226 The client uses his private key,
227 .Pa $HOME/.ssh/id_dsa
229 .Pa $HOME/.ssh/id_rsa ,
230 to sign the session identifier and sends the result to the server.
231 The server checks whether the matching public key is listed in
232 .Pa $HOME/.ssh/authorized_keys
233 and grants access if both the key is found and the signature is correct.
234 The session identifier is derived from a shared Diffie-Hellman value
235 and is only known to the client and the server.
237 If public key authentication fails or is not available, a password
238 can be sent encrypted to the remote host to prove the user's identity.
242 supports hostbased or challenge response authentication.
244 Protocol 2 provides additional mechanisms for confidentiality
245 (the traffic is encrypted using AES, 3DES, Blowfish, CAST128 or Arcfour)
246 and integrity (hmac-md5, hmac-sha1, hmac-ripemd160).
247 Note that protocol 1 lacks a strong mechanism for ensuring the
248 integrity of the connection.
249 .Ss Login session and remote execution
250 When the user's identity has been accepted by the server, the server
251 either executes the given command, or logs into the machine and gives
252 the user a normal shell on the remote machine.
253 All communication with
254 the remote command or shell will be automatically encrypted.
256 If a pseudo-terminal has been allocated (normal login session), the
257 user may use the escape characters noted below.
259 If no pseudo-tty has been allocated,
260 the session is transparent and can be used to reliably transfer binary data.
261 On most systems, setting the escape character to
263 will also make the session transparent even if a tty is used.
265 The session terminates when the command or shell on the remote
266 machine exits and all X11 and TCP/IP connections have been closed.
267 The exit status of the remote program is returned as the exit status of
269 .Ss Escape Characters
270 When a pseudo-terminal has been requested,
272 supports a number of functions through the use of an escape character.
274 A single tilde character can be sent as
276 or by following the tilde by a character other than those described below.
277 The escape character must always follow a newline to be interpreted as
279 The escape character can be changed in configuration files using the
281 configuration directive or on the command line by the
285 The supported escapes (assuming the default
295 List forwarded connections.
299 at logout when waiting for forwarded connection / X11 sessions to terminate.
301 Display a list of escape characters.
303 Send a BREAK to the remote system
304 (only useful for SSH protocol version 2 and if the peer supports it).
307 Currently this allows the addition of port forwardings using the
312 It also allows the cancellation of existing remote port-forwardings
315 Basic help is available, using the
319 Request rekeying of the connection
320 (only useful for SSH protocol version 2 and if the peer supports it).
322 .Ss X11 and TCP forwarding
327 (or see the description of the
331 options described later)
332 and the user is using X11 (the
334 environment variable is set), the connection to the X11 display is
335 automatically forwarded to the remote side in such a way that any X11
336 programs started from the shell (or command) will go through the
337 encrypted channel, and the connection to the real X server will be made
338 from the local machine.
339 The user should not manually set
341 Forwarding of X11 connections can be
342 configured on the command line or in configuration files.
348 will point to the server machine, but with a display number greater than zero.
349 This is normal, and happens because
353 X server on the server machine for forwarding the
354 connections over the encrypted channel.
357 will also automatically set up Xauthority data on the server machine.
358 For this purpose, it will generate a random authorization cookie,
359 store it in Xauthority on the server, and verify that any forwarded
360 connections carry this cookie and replace it by the real cookie when
361 the connection is opened.
362 The real authentication cookie is never
363 sent to the server machine (and no cookies are sent in the plain).
369 (or see the description of the
373 options described later) and
374 the user is using an authentication agent, the connection to the agent
375 is automatically forwarded to the remote side.
377 Forwarding of arbitrary TCP/IP connections over the secure channel can
378 be specified either on the command line or in a configuration file.
379 One possible application of TCP/IP forwarding is a secure connection to an
380 electronic purse; another is going through firewalls.
381 .Ss Server authentication
383 automatically maintains and checks a database containing
384 identifications for all hosts it has ever been used with.
385 Host keys are stored in
386 .Pa $HOME/.ssh/known_hosts
387 in the user's home directory.
388 Additionally, the file
389 .Pa /etc/ssh/ssh_known_hosts
390 is automatically checked for known hosts.
391 Any new hosts are automatically added to the user's file.
392 If a host's identification ever changes,
394 warns about this and disables password authentication to prevent a
395 trojan horse from getting the user's password.
396 Another purpose of this mechanism is to prevent man-in-the-middle attacks
397 which could otherwise be used to circumvent the encryption.
399 .Cm StrictHostKeyChecking
400 option can be used to prevent logins to machines whose
401 host key is not known or has changed.
404 can be configured to verify host identification using fingerprint resource
405 records (SSHFP) published in DNS.
408 option can be used to control how DNS lookups are performed.
409 SSHFP resource records can be generated using
412 The options are as follows:
417 to try protocol version 1 only.
421 to try protocol version 2 only.
425 to use IPv4 addresses only.
429 to use IPv6 addresses only.
431 Enables forwarding of the authentication agent connection.
432 This can also be specified on a per-host basis in a configuration file.
434 Agent forwarding should be enabled with caution.
435 Users with the ability to bypass file permissions on the remote host
436 (for the agent's Unix-domain socket)
437 can access the local agent through the forwarded connection.
438 An attacker cannot obtain key material from the agent,
439 however they can perform operations on the keys that enable them to
440 authenticate using the identities loaded into the agent.
442 Disables forwarding of the authentication agent connection.
443 .It Fl b Ar bind_address
444 Specify the interface to transmit from on machines with multiple
445 interfaces or aliased addresses.
447 Requests compression of all data (including stdin, stdout, stderr, and
448 data for forwarded X11 and TCP/IP connections).
449 The compression algorithm is the same used by
453 can be controlled by the
455 option for protocol version 1.
456 Compression is desirable on modem lines and other
457 slow connections, but will only slow down things on fast networks.
458 The default value can be set on a host-by-host basis in the
459 configuration files; see the
462 .It Fl c Ar cipher_spec
463 Selects the cipher specification for encrypting the session.
465 Protocol version 1 allows specification of a single cipher.
466 The suported values are
472 (triple-des) is an encrypt-decrypt-encrypt triple with three different keys.
473 It is believed to be secure.
475 is a fast block cipher; it appears very secure and is much faster than
478 is only supported in the
480 client for interoperability with legacy protocol 1 implementations
481 that do not support the
484 Its use is strongly discouraged due to cryptographic weaknesses.
488 For protocol version 2
490 is a comma-separated list of ciphers
491 listed in order of preference.
492 The supported ciphers are
506 ``aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,
507 aes192-cbc,aes256-cbc''
512 application-level port forwarding.
513 This works by allocating a socket to listen to
515 on the local side, and whenever a connection is made to this port, the
516 connection is forwarded over the secure channel, and the application
517 protocol is then used to determine where to connect to from the
519 Currently the SOCKS4 and SOCKS5 protocols are supported, and
521 will act as a SOCKS server.
522 Only root can forward privileged ports.
523 Dynamic port forwardings can also be specified in the configuration file.
524 .It Fl e Ar ch | ^ch | none
525 Sets the escape character for sessions with a pty (default:
527 The escape character is only recognized at the beginning of a line.
528 The escape character followed by a dot
530 closes the connection;
531 followed by control-Z suspends the connection;
532 and followed by itself sends the escape character once.
533 Setting the character to
535 disables any escapes and makes the session fully transparent.
536 .It Fl F Ar configfile
537 Specifies an alternative per-user configuration file.
538 If a configuration file is given on the command line,
539 the system-wide configuration file
540 .Pq Pa /etc/ssh/ssh_config
542 The default for the per-user configuration file is
543 .Pa $HOME/.ssh/config .
547 to go to background just before command execution.
550 is going to ask for passwords or passphrases, but the user
551 wants it in the background.
554 The recommended way to start X11 programs at a remote site is with
556 .Ic ssh -f host xterm .
558 Allows remote hosts to connect to local forwarded ports.
559 .It Fl I Ar smartcard_device
560 Specifies which smartcard device to use.
561 The argument is the device
563 should use to communicate with a smartcard used for storing the user's
565 .It Fl i Ar identity_file
566 Selects a file from which the identity (private key) for
567 RSA or DSA authentication is read.
569 .Pa $HOME/.ssh/identity
570 for protocol version 1, and
571 .Pa $HOME/.ssh/id_rsa
573 .Pa $HOME/.ssh/id_dsa
574 for protocol version 2.
575 Identity files may also be specified on
576 a per-host basis in the configuration file.
577 It is possible to have multiple
579 options (and multiple identities specified in
580 configuration files).
582 Disables forwarding (delegation) of GSSAPI credentials to the server.
585 .Ar port : host : hostport
588 Specifies that the given port on the local (client) host is to be
589 forwarded to the given host and port on the remote side.
590 This works by allocating a socket to listen to
592 on the local side, and whenever a connection is made to this port, the
593 connection is forwarded over the secure channel, and a connection is
598 from the remote machine.
599 Port forwardings can also be specified in the configuration file.
600 Only root can forward privileged ports.
601 IPv6 addresses can be specified with an alternative syntax:
604 .Ar port No / Ar host No /
608 .It Fl l Ar login_name
609 Specifies the user to log in as on the remote machine.
610 This also may be specified on a per-host basis in the configuration file.
616 mode for connection sharing.
617 Refer to the description of
623 Additionally, for protocol version 2 a comma-separated list of MAC
624 (message authentication code) algorithms can
625 be specified in order of preference.
628 keyword for more information.
630 Do not execute a remote command.
631 This is useful for just forwarding ports
632 (protocol version 2 only).
636 (actually, prevents reading from stdin).
637 This must be used when
639 is run in the background.
640 A common trick is to use this to run X11 programs on a remote machine.
642 .Ic ssh -n shadows.cs.hut.fi emacs &
643 will start an emacs on shadows.cs.hut.fi, and the X11
644 connection will be automatically forwarded over an encrypted channel.
647 program will be put in the background.
648 (This does not work if
650 needs to ask for a password or passphrase; see also the
654 Can be used to give options in the format used in the configuration file.
655 This is useful for specifying options for which there is no separate
657 For full details of the options listed below, and their possible values, see
660 .Bl -tag -width Ds -offset indent -compact
664 .It ChallengeResponseAuthentication
668 .It ClearAllForwardings
671 .It ConnectionAttempts
679 .It ForwardX11Trusted
681 .It GlobalKnownHostsFile
682 .It GSSAPIAuthentication
683 .It GSSAPIDelegateCredentials
685 .It HostbasedAuthentication
686 .It HostKeyAlgorithms
694 .It NoHostAuthenticationForLocalhost
695 .It NumberOfPasswordPrompts
696 .It PasswordAuthentication
698 .It PreferredAuthentications
701 .It PubkeyAuthentication
703 .It RhostsRSAAuthentication
704 .It RSAAuthentication
706 .It ServerAliveInterval
707 .It ServerAliveCountMax
709 .It StrictHostKeyChecking
711 .It UsePrivilegedPort
713 .It UserKnownHostsFile
718 Port to connect to on the remote host.
719 This can be specified on a
720 per-host basis in the configuration file.
723 Causes all warning and diagnostic messages to be suppressed.
726 .Ar port : host : hostport
729 Specifies that the given port on the remote (server) host is to be
730 forwarded to the given host and port on the local side.
731 This works by allocating a socket to listen to
733 on the remote side, and whenever a connection is made to this port, the
734 connection is forwarded over the secure channel, and a connection is
739 from the local machine.
740 Port forwardings can also be specified in the configuration file.
741 Privileged ports can be forwarded only when
742 logging in as root on the remote machine.
743 IPv6 addresses can be specified with an alternative syntax:
746 .Ar port No / Ar host No /
751 Specifies the location of a control socket for connection sharing.
752 Refer to the description of
760 May be used to request invocation of a subsystem on the remote system.
761 Subsystems are a feature of the SSH2 protocol which facilitate the use
762 of SSH as a secure transport for other applications (eg.\&
764 The subsystem is specified as the remote command.
766 Disable pseudo-tty allocation.
768 Force pseudo-tty allocation.
769 This can be used to execute arbitrary
770 screen-based programs on a remote machine, which can be very useful,
771 e.g., when implementing menu services.
774 options force tty allocation, even if
778 Display the version number and exit.
783 to print debugging messages about its progress.
785 debugging connection, authentication, and configuration problems.
788 options increase the verbosity.
791 Enables X11 forwarding.
792 This can also be specified on a per-host basis in a configuration file.
794 X11 forwarding should be enabled with caution.
795 Users with the ability to bypass file permissions on the remote host
796 (for the user's X authorization database)
797 can access the local X11 display through the forwarded connection.
798 An attacker may then be able to perform activities such as keystroke monitoring.
800 Disables X11 forwarding.
802 Enables trusted X11 forwarding.
804 .Sh CONFIGURATION FILES
806 may additionally obtain configuration data from
807 a per-user configuration file and a system-wide configuration file.
808 The file format and configuration options are described in
812 will normally set the following environment variables:
813 .Bl -tag -width LOGNAME
817 variable indicates the location of the X11 server.
818 It is automatically set by
820 to point to a value of the form
822 where hostname indicates
823 the host where the shell runs, and n is an integer \*(Ge 1.
825 uses this special value to forward X11 connections over the secure
827 The user should normally not set
830 will render the X11 connection insecure (and will require the user to
831 manually copy any required authorization cookies).
833 Set to the path of the user's home directory.
837 set for compatibility with systems that use this variable.
839 Set to the path of the user's mailbox.
843 as specified when compiling
848 needs a passphrase, it will read the passphrase from the current
849 terminal if it was run from a terminal.
852 does not have a terminal associated with it but
856 are set, it will execute the program specified by
858 and open an X11 window to read the passphrase.
859 This is particularly useful when calling
864 (Note that on some machines it
865 may be necessary to redirect the input from
869 Identifies the path of a unix-domain socket used to communicate with the
871 .It Ev SSH_CONNECTION
872 Identifies the client and server ends of the connection.
873 The variable contains
874 four space-separated values: client ip-address, client port number,
875 server ip-address and server port number.
876 .It Ev SSH_ORIGINAL_COMMAND
877 The variable contains the original command line if a forced command
879 It can be used to extract the original arguments.
881 This is set to the name of the tty (path to the device) associated
882 with the current shell or command.
883 If the current session has no tty,
884 this variable is not set.
886 The timezone variable is set to indicate the present timezone if it
887 was set when the daemon was started (i.e., the daemon passes the value
888 on to new connections).
890 Set to the name of the user logging in.
896 .Pa $HOME/.ssh/environment ,
897 and adds lines of the format
899 to the environment if the file exists and if users are allowed to
900 change their environment.
901 For more information, see the
902 .Cm PermitUserEnvironment
907 .It Pa $HOME/.ssh/known_hosts
908 Records host keys for all hosts the user has logged into that are not
910 .Pa /etc/ssh/ssh_known_hosts .
913 .It Pa $HOME/.ssh/identity, $HOME/.ssh/id_dsa, $HOME/.ssh/id_rsa
914 Contains the authentication identity of the user.
915 They are for protocol 1 RSA, protocol 2 DSA, and protocol 2 RSA, respectively.
917 contain sensitive data and should be readable by the user but not
918 accessible by others (read/write/execute).
921 ignores a private key file if it is accessible by others.
922 It is possible to specify a passphrase when
923 generating the key; the passphrase will be used to encrypt the
924 sensitive part of this file using 3DES.
925 .It Pa $HOME/.ssh/identity.pub, $HOME/.ssh/id_dsa.pub, $HOME/.ssh/id_rsa.pub
926 Contains the public key for authentication (public part of the
927 identity file in human-readable form).
929 .Pa $HOME/.ssh/identity.pub
930 file should be added to the file
931 .Pa $HOME/.ssh/authorized_keys
933 where the user wishes to log in using protocol version 1 RSA authentication.
935 .Pa $HOME/.ssh/id_dsa.pub
937 .Pa $HOME/.ssh/id_rsa.pub
938 file should be added to
939 .Pa $HOME/.ssh/authorized_keys
941 where the user wishes to log in using protocol version 2 DSA/RSA authentication.
943 sensitive and can (but need not) be readable by anyone.
945 never used automatically and are not necessary; they are only provided for
946 the convenience of the user.
947 .It Pa $HOME/.ssh/config
948 This is the per-user configuration file.
949 The file format and configuration options are described in
951 Because of the potential for abuse, this file must have strict permissions:
952 read/write for the user, and not accessible by others.
953 .It Pa $HOME/.ssh/authorized_keys
954 Lists the public keys (RSA/DSA) that can be used for logging in as this user.
955 The format of this file is described in the
958 In the simplest form the format is the same as the
961 This file is not highly sensitive, but the recommended
962 permissions are read/write for the user, and not accessible by others.
963 .It Pa /etc/ssh/ssh_known_hosts
964 Systemwide list of known host keys.
965 This file should be prepared by the
966 system administrator to contain the public host keys of all machines in the
968 This file should be world-readable.
970 public keys, one per line, in the following format (fields separated
971 by spaces): system name, public key and optional comment field.
972 When different names are used
973 for the same machine, all such names should be listed, separated by
975 The format is described in the
979 The canonical system name (as returned by name servers) is used by
981 to verify the client host when logging in; other names are needed because
983 does not convert the user-supplied name to a canonical name before
984 checking the key, because someone with access to the name servers
985 would then be able to fool host authentication.
986 .It Pa /etc/ssh/ssh_config
987 Systemwide configuration file.
988 The file format and configuration options are described in
990 .It Pa /etc/ssh/ssh_host_key, /etc/ssh/ssh_host_dsa_key, /etc/ssh/ssh_host_rsa_key
991 These three files contain the private parts of the host keys
993 .Cm RhostsRSAAuthentication
995 .Cm HostbasedAuthentication .
996 If the protocol version 1
997 .Cm RhostsRSAAuthentication
1000 must be setuid root, since the host key is readable only by root.
1001 For protocol version 2,
1005 to access the host keys for
1006 .Cm HostbasedAuthentication .
1007 This eliminates the requirement that
1009 be setuid root when that authentication method is used.
1013 .It Pa $HOME/.rhosts
1014 This file is used in
1016 authentication to list the
1017 host/user pairs that are permitted to log in.
1018 (Note that this file is
1019 also used by rlogin and rsh, which makes using this file insecure.)
1020 Each line of the file contains a host name (in the canonical form
1021 returned by name servers), and then a user name on that host,
1022 separated by a space.
1023 On some machines this file may need to be
1024 world-readable if the user's home directory is on a NFS partition,
1028 Additionally, this file must be owned by the user,
1029 and must not have write permissions for anyone else.
1031 permission for most machines is read/write for the user, and not
1032 accessible by others.
1034 Note that by default
1036 will be installed so that it requires successful RSA host
1037 authentication before permitting
1040 If the server machine does not have the client's host key in
1041 .Pa /etc/ssh/ssh_known_hosts ,
1043 .Pa $HOME/.ssh/known_hosts .
1044 The easiest way to do this is to
1045 connect back to the client from the server machine using ssh; this
1046 will automatically add the host key to
1047 .Pa $HOME/.ssh/known_hosts .
1048 .It Pa $HOME/.shosts
1049 This file is used exactly the same way as
1052 having this file is to be able to use rhosts authentication with
1054 without permitting login with
1058 .It Pa /etc/hosts.equiv
1059 This file is used during
1063 canonical hosts names, one per line (the full format is described in the
1066 If the client host is found in this file, login is
1067 automatically permitted provided client and server user names are the
1069 Additionally, successful RSA host authentication is normally
1071 This file should only be writable by root.
1072 .It Pa /etc/shosts.equiv
1073 This file is processed exactly as
1074 .Pa /etc/hosts.equiv .
1075 This file may be useful to permit logins using
1077 but not using rsh/rlogin.
1078 .It Pa /etc/ssh/sshrc
1079 Commands in this file are executed by
1081 when the user logs in just before the user's shell (or command) is started.
1084 manual page for more information.
1085 .It Pa $HOME/.ssh/rc
1086 Commands in this file are executed by
1088 when the user logs in just before the user's shell (or command) is
1092 manual page for more information.
1093 .It Pa $HOME/.ssh/environment
1094 Contains additional definitions for environment variables, see section
1100 exits with the exit status of the remote command or with 255
1101 if an error occurred.
1121 .%T "SSH Protocol Architecture"
1122 .%N draft-ietf-secsh-architecture-12.txt
1124 .%O work in progress material
1127 OpenSSH is a derivative of the original and free
1128 ssh 1.2.12 release by Tatu Ylonen.
1129 Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
1130 Theo de Raadt and Dug Song
1131 removed many bugs, re-added newer features and
1133 Markus Friedl contributed the support for SSH
1134 protocol versions 1.5 and 2.0.
projects / dragonfly.git / blob