Merge from vendor branch NTPD:
[dragonfly.git] / sys / netproto / 802_11 / wlan / ieee80211_radiotap.h
1 /* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.3 2004/04/05 22:13:21 sam Exp $ */
2 /* $NetBSD: ieee80211_radiotap.h,v 1.3 2003/11/16 09:02:42 dyoung Exp $ */
3 /* $DragonFly: src/sys/netproto/802_11/wlan/Attic/ieee80211_radiotap.h,v 1.1 2004/07/26 16:30:17 joerg Exp $ */
4
5 /*
6  * Copyright (c) 2003, 2004 David Young.  All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. The name of David Young may not be used to endorse or promote
17  *    products derived from this software without specific prior
18  *    written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
21  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
22  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
23  * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
24  * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
25  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
26  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
28  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
29  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
31  * OF SUCH DAMAGE.
32  */
33
34 #ifndef _NETPROTO_802_11_IEEE80211RADIOTAP_H_
35 #define _NETPROTO_802_11_IEEE80211RADIOTAP_H_
36
37 /* A generic radio capture format is desirable. There is one for
38  * Linux, but it is neither rigidly defined (there were not even
39  * units given for some fields) nor easily extensible.
40  *
41  * I suggest the following extensible radio capture format. It is
42  * based on a bitmap indicating which fields are present.
43  *
44  * I am trying to describe precisely what the application programmer
45  * should expect in the following, and for that reason I tell the
46  * units and origin of each measurement (where it applies), or else I
47  * use sufficiently weaselly language ("is a monotonically nondecreasing
48  * function of...") that I cannot set false expectations for lawyerly
49  * readers.
50  */
51 #ifdef _KERNEL
52 #ifndef DLT_IEEE802_11_RADIO
53 #define DLT_IEEE802_11_RADIO    127     /* 802.11 plus WLAN header */
54 #endif
55 #endif /* _KERNEL */
56
57 /* The radio capture header precedes the 802.11 header. */
58 struct ieee80211_radiotap_header {
59         uint8_t         it_version;     /* Version 0. Only increases
60                                          * for drastic changes,
61                                          * introduction of compatible
62                                          * new fields does not count.
63                                          */
64         uint8_t         it_pad;
65         uint16_t        it_len;         /* length of the whole
66                                          * header in bytes, including
67                                          * it_version, it_pad,
68                                          * it_len, and data fields.
69                                          */
70         uint32_t        it_present;     /* A bitmap telling which
71                                          * fields are present. Set bit 31
72                                          * (0x80000000) to extend the
73                                          * bitmap by another 32 bits.
74                                          * Additional extensions are made
75                                          * by setting bit 31.
76                                          */
77 } __attribute__((__packed__));
78
79 /* Name                                 Data type       Units
80  * ----                                 ---------       -----
81  *
82  * IEEE80211_RADIOTAP_TSFT              uint64_t        microseconds
83  *
84  *      Value in microseconds of the MAC's 64-bit 802.11 Time
85  *      Synchronization Function timer when the first bit of the
86  *      MPDU arrived at the MAC. For received frames, only.
87  *
88  * IEEE80211_RADIOTAP_CHANNEL           2 x uint16_t    MHz, bitmap
89  *
90  *      Tx/Rx frequency in MHz, followed by flags (see below).
91  *
92  * IEEE80211_RADIOTAP_FHSS              uint16_t        see below
93  *
94  *      For frequency-hopping radios, the hop set (first byte)
95  *      and pattern (second byte).
96  *
97  * IEEE80211_RADIOTAP_RATE              uint8_t         500kb/s
98  *
99  *      Tx/Rx data rate
100  *
101  * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     int8_t          decibels from
102  *                                                      one milliwatt (dBm)
103  *
104  *      RF signal power at the antenna, decibel difference from
105  *      one milliwatt.
106  *
107  * IEEE80211_RADIOTAP_DBM_ANTNOISE      int8_t          decibels from
108  *                                                      one milliwatt (dBm)
109  *
110  *      RF noise power at the antenna, decibel difference from one
111  *      milliwatt.
112  *
113  * IEEE80211_RADIOTAP_DB_ANTSIGNAL      uint8_t         decibel (dB)
114  *
115  *      RF signal power at the antenna, decibel difference from an
116  *      arbitrary, fixed reference.
117  *
118  * IEEE80211_RADIOTAP_DB_ANTNOISE       uint8_t         decibel (dB)
119  *
120  *      RF noise power at the antenna, decibel difference from an
121  *      arbitrary, fixed reference point.
122  *
123  * IEEE80211_RADIOTAP_BARKER_CODE_LOCK  uint16_t        unitless
124  *
125  *      Quality of Barker code lock. Unitless. Monotonically
126  *      nondecreasing with "better" lock strength. Called "Signal
127  *      Quality" in datasheets.  (Is there a standard way to measure
128  *      this?)
129  *
130  * IEEE80211_RADIOTAP_TX_ATTENUATION    uint16_t        unitless
131  *
132  *      Transmit power expressed as unitless distance from max
133  *      power set at factory calibration.  0 is max power.
134  *      Monotonically nondecreasing with lower power levels.
135  *
136  * IEEE80211_RADIOTAP_DB_TX_ATTENUATION uint16_t        decibels (dB)
137  *
138  *      Transmit power expressed as decibel distance from max power
139  *      set at factory calibration.  0 is max power.  Monotonically
140  *      nondecreasing with lower power levels.
141  *
142  * IEEE80211_RADIOTAP_DBM_TX_POWER      int8_t          decibels from
143  *                                                      one milliwatt (dBm)
144  *
145  *      Transmit power expressed as dBm (decibels from a 1 milliwatt
146  *      reference). This is the absolute power level measured at
147  *      the antenna port.
148  *
149  * IEEE80211_RADIOTAP_FLAGS             uint8_t         bitmap
150  *
151  *      Properties of transmitted and received frames. See flags
152  *      defined below.
153  *
154  * IEEE80211_RADIOTAP_ANTENNA           uint8_t         antenna index
155  *
156  *      Unitless indication of the Rx/Tx antenna for this packet.
157  *      The first antenna is antenna 0.
158  *
159  * IEEE80211_RADIOTAP_FCS               uint32_t        data
160  *
161  *      FCS from frame in network byte order.
162  */
163 enum ieee80211_radiotap_type {
164         IEEE80211_RADIOTAP_TSFT = 0,
165         IEEE80211_RADIOTAP_FLAGS = 1,
166         IEEE80211_RADIOTAP_RATE = 2,
167         IEEE80211_RADIOTAP_CHANNEL = 3,
168         IEEE80211_RADIOTAP_FHSS = 4,
169         IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
170         IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
171         IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
172         IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
173         IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
174         IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
175         IEEE80211_RADIOTAP_ANTENNA = 11,
176         IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
177         IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
178         IEEE80211_RADIOTAP_FCS = 14,
179         IEEE80211_RADIOTAP_EXT = 31,
180 };
181
182 #ifndef _KERNEL
183 /* Channel flags. */
184 #define IEEE80211_CHAN_TURBO    0x0010  /* Turbo channel */
185 #define IEEE80211_CHAN_CCK      0x0020  /* CCK channel */
186 #define IEEE80211_CHAN_OFDM     0x0040  /* OFDM channel */
187 #define IEEE80211_CHAN_2GHZ     0x0080  /* 2 GHz spectrum channel. */
188 #define IEEE80211_CHAN_5GHZ     0x0100  /* 5 GHz spectrum channel */
189 #define IEEE80211_CHAN_PASSIVE  0x0200  /* Only passive scan allowed */
190 #define IEEE80211_CHAN_DYN      0x0400  /* Dynamic CCK-OFDM channel */
191 #define IEEE80211_CHAN_GFSK     0x0800  /* GFSK channel (FHSS PHY) */
192 #endif /* !_KERNEL */
193
194 /* For IEEE80211_RADIOTAP_FLAGS */
195 #define IEEE80211_RADIOTAP_F_CFP        0x01    /* sent/received
196                                                  * during CFP
197                                                  */
198 #define IEEE80211_RADIOTAP_F_SHORTPRE   0x02    /* sent/received
199                                                  * with short
200                                                  * preamble
201                                                  */
202 #define IEEE80211_RADIOTAP_F_WEP        0x04    /* sent/received
203                                                  * with WEP encryption
204                                                  */
205 #define IEEE80211_RADIOTAP_F_FRAG       0x08    /* sent/received
206                                                  * with fragmentation
207                                                  */
208
209 #endif /* _NETPROTO_802_11_IEEE80211RADIOTAP_H_ */