2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
4 # Build-time options are documented in make.conf(5).
6 # The intended user-driven targets are:
8 # buildworld - rebuild *everything*, including glue to help do upgrades
9 # quickworld - skip the glue and do a depend+build on the meat
10 # realquickworld - skip the glue and depend stages and just build the meat
11 # crossworld - only build the glue (particularly the cross-build environment)
12 # installworld- install everything built by "buildworld"
13 # backupworld - copies /bin /sbin /usr/bin /usr/sbin /usr/lib /usr/libexec
14 # to manual backup dir
15 # rescue - create rescue image
16 # restoreworld- installs binaries from manual backup dir to world
17 # restoreworld-auto - installs binaries from auto-backup dir to world
18 # most - build user commands, no libraries or include files
19 # installmost - install user commands, no libraries or include files
20 # backup-clean - delete backup from manual backup dir
21 # backup-auto-clean - delete backup from auto-backup dir
23 # Standard targets (not defined here) are documented in the makefiles in
24 # /usr/share/mk. These include:
25 # obj depend all install clean cleandepend cleanobj
27 # Put initial settings here.
30 # /libexec/ld-elf.so.2 needs to be installed first
31 # Otherwise, install(1) beeing a dynamically linked binary will fail
32 # during the first upgrade from a static to a dynamic world
33 .if exists(${.CURDIR}/libexec)
37 # We must do share/info early so that installation of info `dir'
38 # entries works correctly. Do it first since it is less likely to
39 # grow dependencies on include and lib than vice versa.
40 .if exists(${.CURDIR}/share/info)
44 # We must do include and lib early so that the perl *.ph generation
45 # works correctly as it uses the header files installed by this.
46 .if exists(${.CURDIR}/include)
49 .if exists(${.CURDIR}/lib)
52 # This exists simply to ensure that the obj dir hierarchy is
53 # intact for nrelease, allowing the nrelease Makefile's to
54 # reference ${.OBJDIR}.
56 .if exists(${.CURDIR}/nrelease)
60 .if exists(${.CURDIR}/bin)
63 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
66 .if exists(${.CURDIR}/gnu)
69 .if exists(${.CURDIR}/sbin)
72 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
75 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
78 .if exists(${.CURDIR}/sys)
81 .if exists(${.CURDIR}/usr.bin)
84 .if exists(${.CURDIR}/usr.sbin)
88 .if exists(${.CURDIR}/etc)
92 # These are last, since it is nice to at least get the base system
93 # rebuilt before you do them.
94 .if defined(LOCAL_DIRS)
95 .for _DIR in ${LOCAL_DIRS}
96 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
102 .if defined(SUBDIR_OVERRIDE)
103 SUBDIR= ${SUBDIR_OVERRIDE}
106 .if defined(NOCLEANDIR)
107 CLEANDIR= clean cleandepend
112 .if defined(NO_CLEAN)
116 # Object directory base in primary make. Note that when we rerun make
117 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
118 # subdirectory because the rest of the build system needs it that way.
119 # The original object directory base is saved in OBJTREE.
121 MAKEOBJDIRPREFIX?= /usr/obj
122 OBJTREE?= ${MAKEOBJDIRPREFIX}
124 # Used for stage installs and pathing
126 DESTDIRBASE:= ${OBJTREE}${.CURDIR}
128 # Remove DESTDIR from MAKEFLAGS. It is present in the environment
129 # anyhow, and we need to be able to override it for stage installs
130 .MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
132 # This section sets the tools used to build the world/kernel
135 WORLD_BINUTILSVER?= binutils224
137 # Set the backup parameters if they are not already defined
139 WORLD_BACKUP?= /var/backups/world_backup
140 AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR}
142 TARGET_ARCH?= ${MACHINE_ARCH}
143 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
146 TARGET?= ${TARGET_ARCH}
149 BUILD_ARCH!= sysctl -n hw.machine_arch
151 # temporary until everybody has converted to x86_64
152 .if ${BUILD_ARCH} == "amd64"
156 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
157 .error To cross-build, set TARGET_ARCH.
161 # Backwards compatibility with older make's or older sys.mk's. make
162 # is expected to define MACHINE_PLATFORM.
164 .if !defined(MACHINE_PLATFORM)
165 MACHINE_PLATFORM= pc32
168 # XXX this is ugly and we need to come up with a nicer solution
169 .if !defined(TARGET_PLATFORM)
170 .if ${TARGET_ARCH} == "i386"
171 TARGET_PLATFORM= pc32
172 .elif ${TARGET_ARCH} == "x86_64"
173 TARGET_PLATFORM= pc64
175 .error Unknown target architecture.
179 THREAD_LIB?= thread_xu
180 .if ${THREAD_LIB} == "c_r"
181 .if defined(NO_LIBC_R)
182 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
186 # BTOOLS (Natively built) All non-cross-development tools that the
187 # main build needs. This includes things like 'mkdir' and 'rm'.
188 # We will not use the native system's exec path once we start
189 # on WORLD. (bootstrap-tools and build-tools or BTOOLS)
191 # CTOOLS (Natively built) Cross development tools which are specific
192 # to the target architecture.
194 # WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
197 # MACHINE_PLATFORM Platform Architecture we are building on
198 # MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
199 # MACHINE_ARCH Cpu Architecture we are building on
201 # TARGET_PLATFORM Platform Architecture we are building for
202 # TARGET Machine Architecture we are building for
203 # TARGET_ARCH Cpu Architecture we are building for
205 BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
206 CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
207 WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
209 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
210 # cross-tools stages to augment the existing command path to access newer
211 # versions of certain utilities such as 'patch' that the cross-tools stage
214 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
216 # The strict temporary command path contains all binaries required
217 # by the buildworld system after the cross-tools stage.
219 STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/local/bin:/usr/pkg/bin
225 # Building a world goes through the following stages
227 # 1. bootstrap-tool stage [BMAKE]
228 # This stage is responsible for creating programs that
229 # are needed for backward compatibility reasons. They
230 # are not built as cross-tools.
231 # 2. build-tool stage [TMAKE]
232 # This stage is responsible for creating the object
233 # tree and building any tools that are needed during
235 # 3. cross-tool stage [XMAKE]
236 # This stage is responsible for creating any tools that
237 # are needed for cross-builds. A cross-compiler is one
239 # 4. world stage [WMAKE]
240 # This stage actually builds the world.
241 # 5. install stage (optional) [IMAKE]
242 # This stage installs a previously built world.
244 # In all cases we must carefully adjust the environment so the proper
245 # tools and header files are used.
247 # NOTE: The M4 environment variable is used by the [f]lex binary to
248 # override the location of the 'm4' binary. The override is
249 # needed for certain buildworld version transitions, specifically
250 # past a certain point in 3.3 because the older /usr/bin/m4 will
251 # generate output that will blow up the newer [f]lex/yacc/bison
255 # bootstrap-tool stage
257 BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
259 DESTDIR=${BTOOLSDEST} \
260 PATH=${BTOOLSPATH}:${PATH} \
261 M4=${BTOOLSDEST}/usr/bin/m4 \
262 INSTALL="sh ${.CURDIR}/tools/install.sh"
264 BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
265 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
266 -DNO_WERROR -DNO_NLS -DSYSBUILD
270 TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
273 PATH=${BTOOLSPATH}:${PATH} \
274 M4=${BTOOLSDEST}/usr/bin/m4 \
275 INSTALL="sh ${.CURDIR}/tools/install.sh"
277 TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
278 -DNOSHARED -DSYSBUILD
282 # note: TOOLS_PREFIX points to the obj root holding the cross
283 # compiler binaries, while USRDATA_PREFIX points to the obj root
284 # holding the target environment (and also determines where cross-built
285 # libraries, crt*.o, and include files are installed).
287 XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
289 DESTDIR=${CTOOLSDEST} \
290 _SHLIBDIRPREFIX=${CTOOLSDEST} \
291 INSTALL="sh ${.CURDIR}/tools/install.sh" \
292 TOOLS_PREFIX=${CTOOLSDEST} \
293 USRDATA_PREFIX=${WORLDDEST} \
294 M4=${BTOOLSDEST}/usr/bin/m4 \
295 PATH=${BTOOLSPATH}:${PATH}
297 XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \
298 -DBOOTSTRAPPING -DNOSHARED -DSYSBUILD
300 # world stage, note the strict path and note that TOOLS_PREFIX is left
301 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
302 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
303 # for both binary and library paths, even though it is being compiled to
304 # WORLDDEST. None of the programs in the world stage are ever actually
305 # executed during the buildworld/installworld.
307 CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
309 MACHINE_ARCH=${TARGET_ARCH} \
311 MACHINE_PLATFORM=${TARGET_PLATFORM} \
312 OBJFORMAT_PATH=${CTOOLSDEST} \
313 HOST_CCVER=${HOST_CCVER} \
314 CCVER=${WORLD_CCVER} \
315 LDVER=${WORLD_LDVER} \
316 BINUTILSVER=${WORLD_BINUTILSVER}
318 WMAKEENV= ${CROSSENV} \
319 DESTDIR=${WORLDDEST} \
320 _SHLIBDIRPREFIX=${WORLDDEST} \
321 INSTALL="sh ${.CURDIR}/tools/install.sh" \
322 M4=${BTOOLSDEST}/usr/bin/m4 \
323 PATH=${STRICTTMPPATH}
325 WMAKE= ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD
329 IMAKEENV= ${CROSSENV} \
330 PATH=${STRICTTMPPATH}
331 IMAKE= ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD
335 KMAKEENV= ${WMAKEENV}
339 # Attempt to rebuild the entire system, with reasonable chance of
340 # success, regardless of how old your existing system is.
342 _worldtmp: _cleantmp _mtreetmp
343 .ORDER: _cleantmp _mtreetmp
347 @echo "--------------------------------------------------------------"
348 @echo ">>> Rebuilding the temporary build tree"
349 @echo "--------------------------------------------------------------"
350 .if !defined(NOCLEAN)
351 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
353 # XXX - These two can depend on any header file.
354 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
355 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
359 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
360 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
361 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
362 -p ${_dir}/ > /dev/null
363 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
364 -p ${_dir}/usr > /dev/null
366 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
367 -p ${WORLDDEST}/usr/include > /dev/null
368 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
372 @echo "--------------------------------------------------------------"
373 @echo ">>> stage 1: bootstrap tools"
374 @echo "--------------------------------------------------------------"
375 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
378 @echo "--------------------------------------------------------------"
379 @echo ">>> stage 2a: cleaning up the object tree"
380 @echo "--------------------------------------------------------------"
381 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
384 @echo "--------------------------------------------------------------"
385 @echo ">>> stage 2b: rebuilding the object tree"
386 @echo "--------------------------------------------------------------"
387 cd ${.CURDIR}; ${WMAKE} par-obj
390 @echo "--------------------------------------------------------------"
391 @echo ">>> stage 2c: build tools"
392 @echo "--------------------------------------------------------------"
393 cd ${.CURDIR}; ${TMAKE} build-tools
396 @echo "--------------------------------------------------------------"
397 @echo ">>> stage 3: cross tools"
398 @echo "--------------------------------------------------------------"
399 cd ${.CURDIR}; ${XMAKE} cross-tools
402 @echo "--------------------------------------------------------------"
403 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
404 @echo "--------------------------------------------------------------"
405 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
408 @echo "--------------------------------------------------------------"
409 @echo ">>> stage 4b: building libraries"
410 @echo "--------------------------------------------------------------"
411 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
414 @echo "--------------------------------------------------------------"
415 @echo ">>> stage 4c: make dependencies"
416 @echo "--------------------------------------------------------------"
417 cd ${.CURDIR}; ${WMAKE} par-depend
420 @echo "--------------------------------------------------------------"
421 @echo ">>> stage 4d: building everything.."
422 @echo "--------------------------------------------------------------"
423 cd ${.CURDIR}; ${WMAKE} all
425 @echo "--------------------------------------------------------------"
426 @echo ">>> starting buildworld target"
427 @echo "--------------------------------------------------------------"
429 @echo "--------------------------------------------------------------"
430 @echo ">>> buildworld target complete"
431 @echo "--------------------------------------------------------------"
433 @echo "--------------------------------------------------------------"
434 @echo ">>> starting quickworld target"
435 @echo "--------------------------------------------------------------"
437 @echo "--------------------------------------------------------------"
438 @echo ">>> quickworld target complete"
439 @echo "--------------------------------------------------------------"
441 @echo "--------------------------------------------------------------"
442 @echo ">>> starting installworld target"
443 @echo "--------------------------------------------------------------"
445 # note: buildworld no longer depends on _cleanobj because we rm -rf the
446 # entire object tree and built the bootstrap tools in a different location.
448 # buildworld - build everything from scratch
449 # quickworld - skip the bootstrap, build, and cross-build steps
450 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
452 # note: we include _obj in realquickworld to prevent accidental creation
453 # of files in /usr/src.
456 .if !defined(SUBDIR_OVERRIDE)
457 WMAKE_TGTS+= _worldtmp _bootstrap-tools
459 WMAKE_TGTS+= _obj _build-tools
460 .if !defined(SUBDIR_OVERRIDE)
461 WMAKE_TGTS+= _cross-tools
463 WMAKE_TGTS+= _includes _libraries _depend everything
465 buildworld: _bwinit ${WMAKE_TGTS} _bwdone
467 quickworld: _qwinit _mtreetmp _obj _includes _libraries _depend everything _qwdone
469 realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone
471 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
473 .ORDER: _bwinit ${WMAKE_TGTS} _bwdone
474 .ORDER: _obj _includes
475 .ORDER: _qwinit _mtreetmp _obj
476 .ORDER: installcheck backupworld-auto
477 .ORDER: everything _qwdone
482 # Checks to be sure system is ready for installworld
484 installcheck: _iwinit
485 .if !defined(NO_SENDMAIL)
486 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
487 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
489 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
490 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
491 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
492 .if !defined(OVERRIDE_CHECKS)
493 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
494 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
495 @case `uname -r` in 1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) echo "Base is too old for a normal installworld, you need to use installworld-force" ; /usr/bin/false ; esac
502 # Backs up the current world if ${AUTO_BACKUP} is writable.
503 # Installs everything compiled by a 'buildworld'.
505 # Includes sleep/sync safety before running mkinitrd.
507 installworld: installcheck
508 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
510 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
511 ${IMAKE} backupworld-auto) || \
512 echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
514 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
515 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
517 @echo "--------------------------------------------------------------"
518 @echo ">>> installworld target complete"
519 @echo "--------------------------------------------------------------"
520 @echo "If things work as expected after a full reboot, consider updating the rescue"
521 @echo "image with 'make rescue'. Do not do it until after rebooting."
524 @echo "Doing a forced installworld. This will install to a temporary directory,"
525 @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/"
526 @echo "and finally willl issue a normal installworld. Starting in 5 seconds.".
529 rm -rf /usr/obj/temp > /dev/null 2>& 1 || chflags -R noschg /usr/obj/temp
531 mkdir -p /usr/obj/temp/cpdup/bin
532 (cd ${.CURDIR}/bin/cpdup; make clean; make obj; make clean; make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE)
533 @echo "XXXXXXXXX Installing to temporary XXXXXXXXX"
535 (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1)
536 @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX"
538 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin
539 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin
540 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib
541 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin
542 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin
543 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib
544 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec
545 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec
546 @echo "XXXXXXXXX Doing final installworld XXXXXXXX"
548 (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE)
549 (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE)
551 # Create a rescue image. We no longer do this automatically for several
552 # reasons, primarily that users have had serious issue with mismatched 'vn'
553 # vs the kldload image that can crash the system. But also, the rescue image
554 # is intended to be a rescue image, it is a bad idea to update it at the
555 # same time the world is installed.
558 mkinitrd -b ${DESTDIR}/boot
563 # If you have a build server, you can NFS mount the source and obj directories
564 # and do a 'make reinstall' on the *client* to install new binaries from the
565 # most recent server build.
568 @echo "--------------------------------------------------------------"
569 @echo ">>> Making hierarchy"
570 @echo "--------------------------------------------------------------"
571 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
573 @echo "--------------------------------------------------------------"
574 @echo ">>> Installing everything.."
575 @echo "--------------------------------------------------------------"
576 cd ${.CURDIR}; make -f Makefile.inc1 install
579 # buildkernel, nativekernel, quickkernel, and installkernel
581 # Which kernels to build and/or install is specified by setting
582 # KERNCONF. If not defined a GENERIC kernel is built/installed.
583 # Only the existing (depending TARGET) config files are used
584 # for building kernels and only the first of these is designated
585 # as the one being installed.
587 # You can specify INSTALLSTRIPPED=1 if you wish the installed
588 # kernel and modules to be stripped of its debug info (required
589 # symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
590 # if you only want to strip the modules of their debug info. These
591 # only apply if you have DEBUG=-g in your kernel config or make line.
593 # Note that we have to use TARGET instead of TARGET_ARCH when
594 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
595 # be set to cross-build, we have to make sure TARGET is set
598 .if !defined(KERNCONF) && defined(KERNEL)
602 # XXX makeshift fix to build the right kernel for the (target) architecture
603 # We should configure this in the platform files somehow
604 .if ${TARGET_ARCH} == "i386"
607 KERNCONF?= X86_64_GENERIC
610 INSTKERNNAME?= kernel
612 KRNLSRCDIR= ${.CURDIR}/sys
613 KRNLCONFDIR= ${KRNLSRCDIR}/config
614 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
615 KERNCONFDIR?= ${KRNLCONFDIR}
619 .for _kernel in ${KERNCONF}
620 .if exists(${KERNCONFDIR}/${_kernel})
621 BUILDKERNELS+= ${_kernel}
622 .if empty(INSTALLKERNEL)
623 INSTALLKERNEL= ${_kernel}
628 # kernel version numbers survive rm -rf
630 .for _kernel in ${BUILDKERNELS}
631 .if exists(${KRNLOBJDIR}/${_kernel}/version)
632 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
639 # Builds all kernels defined by BUILDKERNELS.
642 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
643 echo "You must buildworld before buildkernel. If you wish"; \
644 echo "to build a kernel using native tools, config it manually"; \
645 echo "or use the nativekernel target if you are in a rush"; \
650 .for _kernel in ${BUILDKERNELS}
651 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
652 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
653 echo "The kernel was build using buildworld tools which no" ; \
654 echo "longer appear to exist, quickkernel failed!" ; \
661 .if empty(BUILDKERNELS)
662 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
663 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
668 .if defined(KERNWARN)
669 @echo "--------------------------------------------------------------"
670 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
671 @echo "--------------------------------------------------------------"
676 # The buildkernel target rebuilds the specified kernels from scratch
677 # using the crossbuild tools generated by the last buildworld. It is
678 # the safest (but also the most time consuming) way to build a new kernel.
680 buildkernel: bk_tools bk_build_list bk_kernwarn
681 .for _kernel in ${BUILDKERNELS}
682 @echo "--------------------------------------------------------------"
683 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
684 @echo "--------------------------------------------------------------"
685 @echo "===> ${_kernel}"
686 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
687 rm -rf ${KRNLOBJDIR}/${_kernel}
689 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
690 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
691 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
693 mkdir -p ${KRNLOBJDIR}
694 .if !defined(NO_KERNELCONFIG)
696 PATH=${STRICTTMPPATH} \
697 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
698 ${KERNCONFDIR}/${_kernel}
700 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
701 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
703 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
704 .if !defined(NO_KERNELDEPEND)
705 cd ${KRNLOBJDIR}/${_kernel}; \
706 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
708 cd ${KRNLOBJDIR}/${_kernel}; \
709 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
710 @echo "--------------------------------------------------------------"
711 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
712 @echo "--------------------------------------------------------------"
715 # The nativekernel target rebuilds the specified kernels from scratch
716 # using the system's standard compiler rather than using the crossbuild
717 # tools generated by the last buildworld. This is fairly safe if your
718 # system is reasonable up-to-date.
720 nativekernel: bk_build_list bk_kernwarn
721 .for _kernel in ${BUILDKERNELS}
722 @echo "--------------------------------------------------------------"
723 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
724 @echo "--------------------------------------------------------------"
725 @echo "===> ${_kernel}"
726 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
727 rm -rf ${KRNLOBJDIR}/${_kernel}
729 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
730 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
731 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
733 mkdir -p ${KRNLOBJDIR}
734 .if !defined(NO_KERNELCONFIG)
736 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
737 ${KERNCONFDIR}/${_kernel}
739 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
740 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
742 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
743 cd ${KRNLOBJDIR}/${_kernel}; \
744 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
745 make -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
746 .if !defined(NO_KERNELDEPEND)
747 cd ${KRNLOBJDIR}/${_kernel}; \
748 make KERNEL=${INSTKERNNAME} depend
750 cd ${KRNLOBJDIR}/${_kernel}; \
751 make KERNEL=${INSTKERNNAME} all
752 @echo "--------------------------------------------------------------"
753 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
754 @echo "--------------------------------------------------------------"
757 # The quickkernel target rebuilds the specified kernels as quickly
758 # as possible. It will use the native tools or the buildworld cross tools
759 # based on whether the kernel was originally generated via buildkernel or
760 # nativekernel. Config is rerun but the object hierarchy is not rebuilt,
761 # nor is the make depend step run.
763 quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
764 .for _kernel in ${BUILDKERNELS}
765 @echo "--------------------------------------------------------------"
766 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
767 @echo "--------------------------------------------------------------"
768 @echo "===> ${_kernel}"
769 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
770 .if !defined(NO_KERNELCONFIG)
772 PATH=${STRICTTMPPATH} \
773 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
774 ${KERNCONFDIR}/${_kernel}
776 cd ${KRNLOBJDIR}/${_kernel}; \
777 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
779 .if !defined(NO_KERNELCONFIG)
781 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
782 ${KERNCONFDIR}/${_kernel}
784 cd ${KRNLOBJDIR}/${_kernel}; \
785 make KERNEL=${INSTKERNNAME} all
787 @echo "--------------------------------------------------------------"
788 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
789 @echo "--------------------------------------------------------------"
795 # Install the kernel defined by INSTALLKERNEL
797 installkernel reinstallkernel:
798 @echo "--------------------------------------------------------------"
799 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
800 @echo "--------------------------------------------------------------"
801 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
802 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
803 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
805 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
806 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
812 # Build most of the user binaries on the existing system libs and includes.
815 @echo "--------------------------------------------------------------"
816 @echo ">>> Building programs only"
817 @echo "--------------------------------------------------------------"
818 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
819 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all
825 # Install the binaries built by the 'most' target. This does not include
826 # libraries or include files.
829 @echo "--------------------------------------------------------------"
830 @echo ">>> Installing programs only"
831 @echo "--------------------------------------------------------------"
832 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
833 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install
837 # ------------------------------------------------------------------------
839 # From here onwards are utility targets used by the 'make world' and
840 # related targets. If your 'world' breaks, you may like to try to fix
841 # the problem and manually run the following targets to attempt to
842 # complete the build. Beware, this is *not* guaranteed to work, you
843 # need to have a pretty good grip on the current state of the system
844 # to attempt to manually finish it. If in doubt, 'make world' again.
847 # bootstrap-tools: Build all tools required to build all tools. Note that
848 # order is important in a number of cases and also note that the bootstrap
849 # and build tools stages have access to earlier binaries they themselves
852 # patch: older patch's do not have -i. This program must be built
853 # first so other bootstrap tools that need to apply patches
855 # [x]install: dependancies on various new install features
856 # rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
857 # envs are not compatible with older objformat binaries.
859 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
860 _strfile= games/fortune/strfile
863 # BSTRAPDIRS1 - must be built in strict order, no parallelism
865 # order is very important. yacc before m4 before flex. flex exec's m4,
866 # m4's parser file needs the latest byacc (insanity!).
868 BSTRAPDIRS1= ${_strfile} \
870 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
871 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
872 bin/hostname bin/kill \
873 usr.bin/yacc usr.bin/m4 usr.bin/colldef \
874 usr.bin/uudecode usr.bin/xinstall \
875 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
876 usr.bin/find usr.bin/flex
878 # BSTRAPDIRS2 - may built in parallel
881 usr.bin/sed usr.bin/uname usr.bin/touch \
882 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
883 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
884 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
885 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
886 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
887 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
888 usr.bin/tail usr.bin/unifdef usr.bin/tic \
889 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
890 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
891 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
892 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb \
895 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
896 touch ${BTOOLSDEST}/.bootstrap_done
898 bootstrap-tools-before:
899 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
901 bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
903 bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
905 .ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
907 .ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
909 .for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
911 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
912 cd ${.CURDIR}/${_tool}; \
913 make DIRPRFX=${_tool}/ obj; \
914 make DIRPRFX=${_tool}/ depend; \
915 make DIRPRFX=${_tool}/ all; \
916 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
919 # build-tools: Build special purpose build tools.
921 # XXX we may be able to remove or consolidate this into bootstrap-tools
922 # now that we have the native helper (.nx/.no) infrastructure.
924 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
925 _share= share/syscons/scrnmaps
928 _gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc
929 .if !defined(NO_GCC50)
930 _gcc50_cross= gnu/usr.bin/cc50
931 _gcc50_tools= gnu/usr.bin/cc50/cc_prep gnu/usr.bin/cc50/cc_tools
933 _gcc47_cross= gnu/usr.bin/cc47
934 _gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
935 _custom_cross= libexec/customcc
936 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
938 BTOOLSDIRS= ${_gcc47_tools} ${_gcc50_tools} ${_share}
940 build-tools: build-tools-targets
941 touch ${BTOOLSDEST}/.build_done
943 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
945 .ORDER: ${_gcc47_tools:S/^/btools-/}
946 .ORDER: ${_gcc50_tools:S/^/btools-/}
948 .for _tool in ${BTOOLSDIRS}
950 ${ECHODIR} "===> ${_tool} (build-tools)"; \
951 cd ${.CURDIR}/${_tool}; \
952 make DIRPRFX=${_tool}/ obj; \
953 make DIRPRFX=${_tool}/ depend; \
954 make DIRPRFX=${_tool}/ all; \
955 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
959 # cross-tools: Build cross-building tools
961 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
962 _btxld= usr.sbin/btxld
965 CTOOLSDIRS= ${_btxld} ${_binutils} \
966 usr.bin/objformat usr.bin/crunch/crunchide \
967 ${_gcc_common_cross} \
968 ${_gcc47_cross} ${_gcc50_cross} ${_custom_cross}
970 cross-tools: cross-tools-targets
971 touch ${CTOOLSDEST}/.cross_done
973 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
975 .for _tool in ${CTOOLSDIRS}
977 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
978 cd ${.CURDIR}/${_tool}; \
979 make DIRPRFX=${_tool}/ obj; \
980 make DIRPRFX=${_tool}/ depend; \
981 make DIRPRFX=${_tool}/ all; \
982 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
986 # hierarchy - ensure that all the needed directories are present
989 cd ${.CURDIR}/etc; make distrib-dirs
992 # libraries - build all libraries, and install them under ${DESTDIR}.
994 # The list of libraries with dependents (${_prebuild_libs}) and their
995 # interdependencies (__L) are built automatically by the
996 # ${.CURDIR}/tools/make_libdeps.sh script.
998 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
999 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
1003 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
1004 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD;
1005 .if !defined(NO_GCC50)
1007 HOST_CCVER=${HOST_CCVER} CCVER=gcc50 \
1008 make -f Makefile.inc1 _startup_libs50 -DSYSBUILD;
1011 make -f Makefile.inc1 _startup_libs -DSYSBUILD; \
1012 make -f Makefile.inc1 _prebuild_libs -DSYSBUILD; \
1013 make -f Makefile.inc1 _generic_libs -DSYSBUILD;
1014 touch ${WORLDDEST}/.libraries_done
1016 # These dependencies are not automatically generated:
1018 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
1019 # shared libraries for ELF. The target for _startup_libsXX is
1020 # specifically built using gccXX.
1022 _startup_libs47= gnu/usr.bin/cc47/cc_prep \
1023 gnu/usr.bin/cc47/cc_tools \
1025 gnu/lib/gcc47/libgcc \
1026 gnu/lib/gcc47/libgcc_eh \
1027 gnu/lib/gcc47/libgcc_pic
1028 _startup_libs50= gnu/usr.bin/cc50/cc_prep \
1029 gnu/usr.bin/cc50/cc_tools \
1031 gnu/lib/gcc50/libgcc \
1032 gnu/lib/gcc50/libgcc_eh \
1033 gnu/lib/gcc50/libgcc_pic
1034 _startup_libs= lib/csu lib/libc lib/libc_rtld
1036 _prebuild_libs= lib/libbz2 lib/liblzma lib/libz
1037 _prebuild_libs+= lib/libutil
1039 _generic_libs= gnu/lib
1041 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
1042 lib/libncurses/libncurses lib/libopie
1044 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
1048 .if !defined(NO_CRYPT)
1049 .if !defined(NO_OPENSSL)
1050 _prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
1051 .if !defined(NO_OPENSSH)
1052 _prebuild_libs+= secure/lib/libssh
1053 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
1056 _generic_libs+= secure/lib
1059 _prebuild_libs+= lib/libradius lib/libsbuf lib/libtacplus lib/libm \
1060 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
1061 lib/libpthread lib/libprop lib/libdevattr
1063 _generic_libs+= usr.bin/flex/lib
1065 .for _lib in ${_startup_libs47} ${_startup_libs50} \
1066 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
1068 .if exists(${.CURDIR}/${_lib})
1069 ${ECHODIR} "===> ${_lib}"; \
1070 cd ${.CURDIR}/${_lib}; \
1071 make DIRPRFX=${_lib}/ depend; \
1072 make DIRPRFX=${_lib}/ all; \
1073 make DIRPRFX=${_lib}/ install
1077 _startup_libs: ${_startup_libs:S/$/__L/}
1078 _startup_libs47: ${_startup_libs47:S/$/__L/}
1079 _startup_libs50: ${_startup_libs50:S/$/__L/}
1080 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1081 _generic_libs: ${_generic_libs:S/$/__L/}
1083 # library targets must be ordered because there are inter-library
1084 # races (e.g. generation of tconfig.h)
1086 .ORDER: ${_startup_libs47:S/$/__L/}
1087 .ORDER: ${_startup_libs50:S/$/__L/}
1088 .ORDER: ${_startup_libs:S/$/__L/}
1089 .ORDER: ${_prebuild_libs:S/$/__L/}
1090 .ORDER: ${_generic_libs:S/$/__L/}
1092 .for __target in clean cleandepend cleandir obj depend includes
1093 .for entry in ${SUBDIR}
1094 ${entry}.${__target}__D: .PHONY
1095 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1096 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1097 edir=${entry}.${MACHINE_ARCH}; \
1098 cd ${.CURDIR}/$${edir}; \
1100 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1102 cd ${.CURDIR}/$${edir}; \
1104 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1106 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1107 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
1109 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1111 # The wmake target is used by /usr/bin/wmake to run make in a
1112 # world build environment.
1115 @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD'
1118 @echo '${WMAKEENV} /bin/sh'
1121 @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD'
1124 @echo '${BMAKEENV} /bin/sh'
1127 @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD'
1130 @echo '${TMAKEENV} /bin/sh'
1133 @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD'
1136 @echo '${XMAKEENV} /bin/sh'
1138 backupworld: backup-clean
1139 @mkdir -p ${WORLD_BACKUP}
1140 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1141 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1142 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1143 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1144 --options gzip:compression-level=1 \
1145 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1149 .if !defined(NO_BACKUP)
1150 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1151 @mkdir -p ${AUTO_BACKUP}
1152 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1153 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1154 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1155 tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1156 --options gzip:compression-level=1 \
1157 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1162 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1165 rm -f ${WORLD_BACKUP}/binaries.tar.gz
1168 .if !exists(${WORLD_BACKUP}/binaries.tar.gz)
1169 @echo "There does not seem to be a valid archive present."
1171 @echo "Restoring system binaries from manual backup archive..."
1172 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1173 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1174 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1175 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1179 .if !exists(${AUTO_BACKUP}/binaries.tar.gz)
1180 @echo "There does not seem to be a valid archive present."
1182 @echo "Restoring system binaries from auto-backup archive..."
1183 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1184 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1185 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1186 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1189 # Take advantage of bmake error response
1191 MAKE_PRINT_VAR_ON_ERROR= \
1202 .include <bsd.subdir.mk>