2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
7 # $DragonFly: src/sys/config/GENERIC,v 1.60 2008/07/26 14:26:30 sephe Exp $
18 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
20 options MATH_EMULATE #Support for x87 emulation
21 options INET #InterNETworking
22 options INET6 #IPv6 communications protocols
23 options HAMMER #Hammer Filesystem
24 options NULLFS #NULL filesystem
25 options FFS #Berkeley Fast Filesystem
26 options FFS_ROOT #FFS usable as root device [keep this!]
27 options SOFTUPDATES #Enable FFS soft updates support
28 options UFS_DIRHASH #Improve performance on big directories
29 options MFS #Memory Filesystem
30 options TMPFS #Temporary Filesystem
31 options MD_ROOT #MD is a potential root device
32 options NFS #Network Filesystem
33 options NFS_ROOT #NFS usable as root device, NFS required
34 options MSDOSFS #MSDOS Filesystem
35 options CD9660 #ISO 9660 Filesystem
36 options PROCFS #Process filesystem
37 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
38 options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
39 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
40 options DEVICE_POLLING # Support mixed interrupt-polling
41 # handling of network device drivers
42 options UCONSOLE #Allow users to grab the console
43 options USERCONFIG #boot -c editor
44 options VISUAL_USERCONFIG #visual boot -c editor
45 options KTRACE #ktrace(1) support
46 options SYSVSHM #SYSV-style shared memory
47 options SYSVMSG #SYSV-style message queues
48 options SYSVSEM #SYSV-style semaphores
49 options P1003_1B #Posix P1003_1B real-time extensions
50 options _KPOSIX_PRIORITY_SCHEDULING
51 options ICMP_BANDLIM #Rate limit bad replies
52 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
53 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~128k to driver.
55 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
56 # output. Adds ~215k to driver.
58 # To make an SMP kernel both SMP and APIC_IO are usually
59 # specified. SMP boxes with severely broken BIOSes which
60 # boot fine for non-SMP builds *might* work in SMP mode
61 # if you define SMP and leave APIC_IO turned off.
63 #options SMP # Symmetric MultiProcessor Kernel
64 #options APIC_IO # Symmetric (APIC) I/O
66 # Debugging for Development
75 # Firmware assist module
76 device firmware # firmware assist module
79 device fdc0 at isa? port IO_FD1 irq 6 drq 2
80 device fd0 at fdc0 drive 0
81 device fd1 at fdc0 drive 1
83 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
84 # don't use the above line for fdc0 but the following one:
87 # AHCI driver, this will override NATA for AHCI devices,
88 # both drivers may be included.
96 # NEW-ATA (NATA) and ATAPI devices
99 device natadisk # ATA disk drives
100 device natapicd # ATAPI CDROM drives
101 device natapifd # ATAPI floppy drives
102 device natapist # ATAPI tape drives
103 device natapicam # Emulate ATAPI devices as SCSI
104 device nataraid # support for ATA software RAID
106 device natausb # ATA-over-USB support
107 options ATA_STATIC_ID # Static device numbering
109 # LEGACY ATA and ATAPI devices
110 #device ata0 at isa? port IO_WD1 irq 14
111 #device ata1 at isa? port IO_WD2 irq 15
113 #device atadisk # ATA disk drives
114 #device atapicd # ATAPI CDROM drives
115 #device atapifd # ATAPI floppy drives
116 #device atapist # ATAPI tape drives
117 #device atapicam # Emulate ATAPI devices as SCSI via CAM
118 #options ATA_STATIC_ID #Static device numbering
121 device ahb # EISA AHA1742 family
122 device ahc # AHA2940 and onboard AIC7xxx devices
123 device ahd # AHA39320/29320 and onboard AIC79xx devices
124 device amd # AMD 53C974 (Tekram DC-390(T))
125 device isp # Qlogic family
126 device mpt # LSI-Logic MPT/Fusion
127 device ncr # NCR/Symbios Logic
128 device sym # NCR/Symbios Logic (newer chipsets)
129 options SYM_SETUP_LP_PROBE_MAP=0x40
130 # Allow ncr to attach legacy NCR devices when
131 # both sym and ncr are configured
139 device ncv # NCR 53C500
140 device nsp # Workbit Ninja SCSI-3
141 device stg # TMC 18C30/18C50
144 device scbus # SCSI bus (required)
145 device da # Direct Access (disks)
146 device sa # Sequential Access (tape etc)
148 device pass # Passthrough device (direct SCSI access)
149 device sg # Passthrough device (linux scsi generic)
151 # RAID controllers interfaced to the SCSI subsystem
152 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
153 device dpt # DPT Smartcache - See LINT for options!
154 device iir # Intel Integrated RAID
155 device mly # Mylex AcceleRAID/eXtremeRAID
156 device ciss # Compaq SmartRAID 5* series
159 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
160 #device aacp # SCSI passthrough for aac (requires CAM)
161 device ida # Compaq Smart RAID
162 device ips # IBM ServeRAID
163 device amr # AMI MegaRAID
164 device mlx # Mylex DAC960 family
165 device twe # 3ware Escalade 7000/8000's
166 device twa # 3ware Escalade 9000's
167 device pst # Promise Supertrack
169 # atkbdc0 controls both the keyboard and the PS/2 mouse
170 device atkbdc0 at isa? port IO_KBD
171 device atkbd0 at atkbdc? irq 1 flags 0x1
172 device psm0 at atkbdc? irq 12
176 # kbdmux is the keyboard multiplexer
179 # splash screen/screen saver
182 # syscons is the default console driver, resembling an SCO console
183 device sc0 at isa? flags 0x100
184 options SC_PIXEL_MODE # add support for the raster text mode
186 device agp # support several AGP chipsets
188 # Floating point support - do not disable.
189 device npx0 at nexus? port IO_NPX irq 13
191 # Power management support (see LINT for more options)
192 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
194 # HW monitoring devices
195 device aps0 at isa? port 0x1600
196 device lm0 at isa? port 0x290
197 device it0 at isa? port 0x290
198 device it1 at isa? port 0xc00
199 device it2 at isa? port 0xd00
200 device it3 at isa? port 0x228
201 device wbsio0 at isa? port 0x2e
202 device wbsio1 at isa? port 0x4e
203 device lm#3 at wbsio?
205 # PCCARD (PCMCIA) support
211 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
212 device sio1 at isa? port IO_COM2 irq 3
213 device sio2 at isa? disable port IO_COM3 irq 5
214 device sio3 at isa? disable port IO_COM4 irq 9
217 device ppc0 at isa? irq 7
218 device ppbus # Parallel port bus (required)
220 device plip # TCP/IP over parallel
221 device ppi # Parallel port interface device
222 #device vpo # Requires scbus and da
225 device de # DEC/Intel DC21x4x (``Tulip'')
226 device txp # 3Com 3cR990 (``Typhoon'')
227 device vx # 3Com 3c590, 3c595 (``Vortex'')
229 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
231 device ig_hal # Intel PRO/1000 hardware abstraction layer
233 # PCI Ethernet NICs that use the common MII bus controller code.
234 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
235 device miibus # MII bus support
236 device ae # Attansic/Atheros L2 Fast Ethernet
237 device age # Attansic/Atheros L1 Gigabit Ethernet
238 device alc # Atheros AR8131/AR8132
239 device ale # Atheros AR8121/AR8113/AR8114
240 device bce # Broadcom NetXtreme II Gigabit Ethernet
241 device bfe # Broadcom BCM440x 10/100 Ethernet
242 device dc # DEC/Intel 21143 and various workalikes
243 device et # Agere ET1310 10/100/1000 Ethernet
244 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
245 device jme # JMicron Gigabit/Fast Ethernet
246 device pcn # AMD Am79C97x PCI 10/100 NICs
247 device rl # RealTek 8129/8139
248 device re # RealTek 8139C+/8169
249 device sf # Adaptec AIC-6915 (``Starfire'')
250 device sis # Silicon Integrated Systems SiS 900/SiS 7016
251 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
252 device ste # Sundance ST201 (D-Link DFE-550TX)
253 device tl # Texas Instruments ThunderLAN
254 device tx # SMC EtherPower II (83c170 ``EPIC'')
255 device vge # VIA 612x GigE
256 device vr # VIA Rhine, Rhine II
257 device wb # Winbond W89C840F
258 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
259 device bge # Broadcom BCM570x (``Tigon III'')
260 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
261 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
262 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
265 # 'device ed' requires 'device miibus'
266 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
269 device fe0 at isa? disable port 0x300
274 options IEEE80211_DEBUG #enable debugging msgs
275 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
276 options IEEE80211_SUPPORT_TDMA #enable TDMA support
277 device wlan # 802.11 support
278 device wlan_ccmp # 802.11 CCMP support
279 device wlan_tkip # 802.11 TKIP support
280 device wlan_wep # 802.11 WEP support
281 #device wlan_amrr # AMRR
283 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
284 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
285 # mode (the factory default). If you set the switches on your ISA
286 # card for a manually chosen I/O address and IRQ, you must specify
287 # those parameters here.
289 device ral # Ralink Technology 802.11 wireless NIC
290 #device rtw # RealTek 802.11 wireless NIC
291 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
292 # exists only as a PCMCIA device, so there is no ISA attachment needed
293 # and resources will always be dynamically assigned by the pccard code.
296 # The probe order of these is presently determined by i386/isa/isa_compat.c.
297 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
298 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
299 device lnc0 at isa? disable port 0x280 irq 10 drq 0
300 device cs0 at isa? disable port 0x300
301 device sn0 at isa? disable port 0x300 irq 10
303 # Pseudo devices - the number indicates how many units to allocate.
304 pseudo-device loop # Network loopback
305 pseudo-device ether # Ethernet support
306 pseudo-device sl 1 # Kernel SLIP
307 pseudo-device ppp 1 # Kernel PPP
308 pseudo-device tun # Packet tunnel.
309 pseudo-device pty # Pseudo-ttys (telnet etc)
310 pseudo-device md # Memory "disks"
311 pseudo-device gif # IPv6 and IPv4 tunneling
312 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
314 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
315 # Be aware of the administrative consequences of enabling this!
316 pseudo-device bpf #Berkeley packet filter
318 pseudo-device crypto # core crypto support, used by wlan
319 pseudo-device cryptodev
322 device uhci # UHCI PCI->USB interface
323 device ohci # OHCI PCI->USB interface
324 device usb # USB Bus (required)
325 device ugen # Generic
326 device uhid # "Human Interface Devices"
327 device ukbd # Keyboard
328 device ulpt # Printer
329 device umass # Disks/Mass storage - Requires scbus and da
331 device uscanner # Scanners
332 device urio # Diamond Rio MP3 Player
333 # USB Ethernet, requires mii
334 device aue # ADMtek USB ethernet
335 device axe # ASIX Electronics USB Ethernet
336 device cue # CATC USB ethernet
337 device kue # Kawasaki LSI USB ethernet
338 device rue # RealTek 8150 based USB ethernet
339 # USB wireless NICs, requires wlan, wlan_amrr
340 #device rum # Ralink Technology RT2501USB/RT2601USB
341 #device ural # Ralink Technology RT2500USB
344 device firewire # FireWire bus code
345 device sbp # SCSI over FireWire (Requires scbus and da)
346 device fwe # Ethernet over FireWire (non-standard!)