2 * Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Herb Peyerl.
16 * 4. The name of Herb Peyerl may not be used to endorse or promote products
17 * derived from this software without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
20 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
21 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
22 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
24 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
28 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 * if_ep.c,v 1.19 1995/01/24 20:53:45 davidg Exp
34 * Modified from the FreeBSD 1.1.5.1 version by:
36 * INRIA - Sophia Antipolis, France
37 * avega@sophia.inria.fr
41 * $FreeBSD: src/sys/dev/ep/if_ep.c,v 1.95.2.3 2002/03/06 07:26:35 imp Exp $
42 * $DragonFly: src/sys/dev/netif/ep/if_ep.c,v 1.23 2005/12/11 01:54:08 swildner Exp $
44 * Promiscuous mode added and interrupt logic slightly changed
45 * to reduce the number of adapter failures. Transceiver select
46 * logic changed to use value from EEPROM. Autoconfiguration
50 * Chelindbank (Chelyabinsk, Russia)
51 * babkin@hq.icb.chel.su
55 * Pccard support for 3C589 by:
61 * MAINTAINER: Matthew N. Dodd <winter@jurai.net>
65 #include <sys/param.h>
66 #include <sys/kernel.h>
67 #include <sys/systm.h>
68 #include <sys/malloc.h>
70 #include <sys/socket.h>
71 #include <sys/sockio.h>
72 #include <sys/thread2.h>
74 #include <sys/module.h>
77 #include <machine/bus.h>
78 #include <machine/resource.h>
82 #include <net/ifq_var.h>
83 #include <net/if_arp.h>
84 #include <net/if_media.h>
85 #include <net/ethernet.h>
88 #include <netinet/in.h>
89 #include <netinet/if_ether.h>
91 #include <machine/clock.h>
95 #include "../elink_layer/elink.h"
97 /* Exported variables */
98 devclass_t ep_devclass;
101 static char * ep_conn_type[] = {"UTP", "AUI", "???", "BNC"};
102 static int if_media2ep_media[] = { 0, 0, 0, UTP, BNC, AUI };
105 static int ep_media2if_media[] =
106 { IFM_10_T, IFM_10_5, IFM_NONE, IFM_10_2, IFM_NONE };
109 static void ep_if_init (void *);
110 static int ep_if_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *);
111 static void ep_if_start (struct ifnet *);
112 static void ep_if_watchdog (struct ifnet *);
114 /* if_media functions */
115 static int ep_ifmedia_upd (struct ifnet *);
116 static void ep_ifmedia_sts (struct ifnet *, struct ifmediareq *);
118 static void epstop (struct ep_softc *);
119 static void epread (struct ep_softc *);
120 static int eeprom_rdy (struct ep_softc *);
122 DECLARE_DUMMY_MODULE(if_ep);
124 #define EP_FTST(sc, f) (sc->stat & (f))
125 #define EP_FSET(sc, f) (sc->stat |= (f))
126 #define EP_FRST(sc, f) (sc->stat &= ~(f))
129 eeprom_rdy(struct ep_softc *sc)
133 for (i = 0; is_eeprom_busy(BASE) && i < MAX_EEPROMBUSY; i++) {
136 if (i >= MAX_EEPROMBUSY) {
137 if_printf(&sc->arpcom.ac_if, "eeprom failed to come ready.\n");
144 * get_e: gets a 16 bits word from the EEPROM. we must have set the window
148 get_e(struct ep_softc *sc, int offset)
152 outw(BASE + EP_W0_EEPROM_COMMAND, (EEPROM_CMD_RD << sc->epb.cmd_off) | offset);
155 return (inw(BASE + EP_W0_EEPROM_DATA));
159 ep_get_macaddr(struct ep_softc *sc, uint8_t *addr)
162 u_int16_t * macaddr = (u_int16_t *)addr;
165 for(i = EEPROM_NODE_ADDR_0; i <= EEPROM_NODE_ADDR_2; i++) {
166 macaddr[i] = htons(get_e(sc, i));
173 ep_alloc(device_t dev)
175 struct ep_softc * sc = device_get_softc(dev);
180 sc->iobase = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
183 device_printf(dev, "No I/O space?!\n");
189 sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
191 device_printf(dev, "No irq?!\n");
196 if_initname(&sc->arpcom.ac_if,
197 device_get_name(dev), device_get_unit(dev));
198 sc->stat = 0; /* 16 bit access */
200 sc->ep_io_addr = rman_get_start(sc->iobase);
202 sc->ep_btag = rman_get_bustag(sc->iobase);
203 sc->ep_bhandle = rman_get_bushandle(sc->iobase);
205 sc->ep_connectors = 0;
206 sc->ep_connector = 0;
210 sc->epb.prod_id = get_e(sc, EEPROM_PROD_ID);
211 sc->epb.res_cfg = get_e(sc, EEPROM_RESOURCE_CFG);
218 ep_get_media(struct ep_softc *sc)
223 config = inw(BASE + EP_W0_CONFIG_CTRL);
225 sc->ep_connectors |= AUI;
227 sc->ep_connectors |= BNC;
229 sc->ep_connectors |= UTP;
231 if (!(sc->ep_connectors & 7)) {
233 if_printf(&sc->arpcom.ac_if, "no connectors!\n");
237 * This works for most of the cards so we'll do it here.
238 * The cards that require something different can override
241 sc->ep_connector = inw(BASE + EP_W0_ADDRESS_CFG) >> ACF_CONNECTOR_BITS;
247 ep_free(device_t dev)
249 struct ep_softc * sc = device_get_softc(dev);
252 bus_release_resource(dev, SYS_RES_IOPORT, 0, sc->iobase);
254 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq);
260 ep_attach(struct ep_softc *sc)
262 struct ifnet * ifp = NULL;
263 struct ifmedia * ifm = NULL;
265 uint8_t ether_addr[ETHER_ADDR_LEN];
270 ep_get_macaddr(sc, ether_addr);
273 * Setup the station address
275 p = (u_short*)ether_addr;
277 for (i = 0; i < 3; i++) {
278 outw(BASE + EP_W2_ADDR_0 + (i * 2), ntohs(p[i]));
281 ifp = &sc->arpcom.ac_if;
284 ifp->if_mtu = ETHERMTU;
285 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
286 ifp->if_start = ep_if_start;
287 ifp->if_ioctl = ep_if_ioctl;
288 ifp->if_watchdog = ep_if_watchdog;
289 ifp->if_init = ep_if_init;
290 ifq_set_maxlen(&ifp->if_snd, IFQ_MAXLEN);
291 ifq_set_ready(&ifp->if_snd);
293 if (!sc->epb.mii_trans) {
294 ifmedia_init(&sc->ifmedia, 0, ep_ifmedia_upd, ep_ifmedia_sts);
296 if (sc->ep_connectors & AUI)
297 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_5, 0, NULL);
298 if (sc->ep_connectors & UTP)
299 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
300 if (sc->ep_connectors & BNC)
301 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_2, 0, NULL);
302 if (!sc->ep_connectors)
303 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_NONE, 0, NULL);
305 ifmedia_set(&sc->ifmedia, IFM_ETHER|ep_media2if_media[sc->ep_connector]);
308 ifm->ifm_media = ifm->ifm_cur->ifm_media;
312 ether_ifattach(ifp, ether_addr, NULL);
314 #ifdef EP_LOCAL_STATS
315 sc->rx_no_first = sc->rx_no_mbuf = sc->rx_bpf_disc =
316 sc->rx_overrunf = sc->rx_overrunl = sc->tx_underrun = 0;
318 EP_FSET(sc, F_RX_FIRST);
319 sc->top = sc->mcur = 0;
325 * The order in here seems important. Otherwise we may not receive
329 ep_if_init(void *xsc)
331 struct ep_softc *sc = xsc;
332 struct ifnet *ifp = &sc->arpcom.ac_if;
340 while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
343 outw(BASE + EP_COMMAND, STOP_TRANSCEIVER);
345 outw(BASE + EP_W4_MEDIA_TYPE, DISABLE_UTP);
348 /* Disable the card */
349 outw(BASE + EP_W0_CONFIG_CTRL, 0);
351 /* Enable the card */
352 outw(BASE + EP_W0_CONFIG_CTRL, ENABLE_DRQ_IRQ);
356 /* Reload the ether_addr. */
357 for (i = 0; i < 6; i++)
358 outb(BASE + EP_W2_ADDR_0 + i, sc->arpcom.ac_enaddr[i]);
360 outw(BASE + EP_COMMAND, RX_RESET);
361 outw(BASE + EP_COMMAND, TX_RESET);
362 while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
364 /* Window 1 is operating window */
366 for (i = 0; i < 31; i++)
367 inb(BASE + EP_W1_TX_STATUS);
369 /* get rid of stray intr's */
370 outw(BASE + EP_COMMAND, ACK_INTR | 0xff);
372 outw(BASE + EP_COMMAND, SET_RD_0_MASK | S_5_INTS);
374 outw(BASE + EP_COMMAND, SET_INTR_MASK | S_5_INTS);
376 if (ifp->if_flags & IFF_PROMISC)
377 outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL |
378 FIL_GROUP | FIL_BRDCST | FIL_ALL);
380 outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL |
381 FIL_GROUP | FIL_BRDCST);
383 if (!sc->epb.mii_trans) {
387 outw(BASE + EP_COMMAND, RX_ENABLE);
388 outw(BASE + EP_COMMAND, TX_ENABLE);
390 ifp->if_flags |= IFF_RUNNING;
391 ifp->if_flags &= ~IFF_OACTIVE; /* just in case */
393 #ifdef EP_LOCAL_STATS
394 sc->rx_no_first = sc->rx_no_mbuf =
395 sc->rx_overrunf = sc->rx_overrunl = sc->tx_underrun = 0;
397 EP_FSET(sc, F_RX_FIRST);
400 sc->top = sc->mcur = 0;
402 outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_INIT_EARLY_THRESH);
403 outw(BASE + EP_COMMAND, SET_TX_START_THRESH | 16);
406 * Store up a bunch of mbuf's for use later. (MAX_MBS). First we free up
407 * any that we had in case we're being called from intr or somewhere
417 static const char padmap[] = {0, 3, 2, 1};
420 ep_if_start(struct ifnet *ifp)
422 struct ep_softc *sc = ifp->if_softc;
432 while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
433 if (ifp->if_flags & IFF_OACTIVE) {
440 /* Sneak a peek at the next packet */
441 m = ifq_poll(&ifp->if_snd);
447 for (len = 0, top = m; m; m = m->m_next)
450 pad = padmap[len & 3];
453 * The 3c509 automatically pads short packets to minimum ethernet length,
454 * but we drop packets that are too large. Perhaps we should truncate
457 if (len + pad > ETHER_MAX_LEN) {
458 /* packet is obviously too large: toss it */
460 ifq_dequeue(&ifp->if_snd, m);
464 if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) {
465 /* no room in FIFO */
466 outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | (len + pad + 4));
468 if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) {
469 ifp->if_flags |= IFF_OACTIVE;
474 outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | EP_THRESH_DISABLE);
477 ifq_dequeue(&ifp->if_snd, m);
479 outw(BASE + EP_W1_TX_PIO_WR_1, len);
480 outw(BASE + EP_W1_TX_PIO_WR_1, 0x0); /* Second dword meaningless */
482 if (EP_FTST(sc, F_ACCESS_32_BITS)) {
483 for (top = m; m != 0; m = m->m_next) {
484 outsl(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t),
487 outsb(BASE + EP_W1_TX_PIO_WR_1,
488 mtod(m, caddr_t) + (m->m_len & (~3)),
492 for (top = m; m != 0; m = m->m_next) {
493 outsw(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len / 2);
495 outb(BASE + EP_W1_TX_PIO_WR_1,
496 *(mtod(m, caddr_t) + m->m_len - 1));
501 outb(BASE + EP_W1_TX_PIO_WR_1, 0); /* Padding */
510 * Is another packet coming in? We don't want to overflow the tiny RX
514 if (inw(BASE + EP_W1_RX_STATUS) & RX_BYTES_MASK) {
516 * we check if we have packets left, in that case we prepare to come
519 if (!ifq_is_empty(&ifp->if_snd))
520 outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | 8);
531 struct ep_softc *sc = arg;
532 struct ifnet *ifp = &sc->arpcom.ac_if;
536 * quick fix: Try to detect an interrupt when the card goes away.
538 if (sc->gone || inw(BASE + EP_STATUS) == 0xffff) {
542 outw(BASE + EP_COMMAND, SET_INTR_MASK); /* disable all Ints */
546 while ((status = inw(BASE + EP_STATUS)) & S_5_INTS) {
548 /* first acknowledge all interrupt sources */
549 outw(BASE + EP_COMMAND, ACK_INTR | (status & S_MASK));
551 if (status & (S_RX_COMPLETE | S_RX_EARLY))
553 if (status & S_TX_AVAIL) {
556 ifp->if_flags &= ~IFF_OACTIVE;
558 inw(BASE + EP_W1_FREE_TX);
561 if (status & S_CARD_FAILURE) {
563 #ifdef EP_LOCAL_STATS
565 if_printf(ifp, "\n\tStatus: %x\n", status);
567 printf("\tFIFO Diagnostic: %x\n", inw(BASE + EP_W4_FIFO_DIAG));
568 printf("\tStat: %x\n", sc->stat);
569 printf("\tIpackets=%d, Opackets=%d\n",
570 ifp->if_ipackets, ifp->if_opackets);
571 printf("\tNOF=%d, NOMB=%d, RXOF=%d, RXOL=%d, TXU=%d\n",
572 sc->rx_no_first, sc->rx_no_mbuf, sc->rx_overrunf,
573 sc->rx_overrunl, sc->tx_underrun);
577 if_printf(ifp, "Status: %x (input buffer overflow)\n", status);
586 if (status & S_TX_COMPLETE) {
588 /* we need ACK. we do it at the end */
590 * We need to read TX_STATUS until we get a 0 status in order to
591 * turn off the interrupt flag.
593 while ((status = inb(BASE + EP_W1_TX_STATUS)) & TXS_COMPLETE) {
594 if (status & TXS_SUCCES_INTR_REQ);
595 else if (status & (TXS_UNDERRUN | TXS_JABBER | TXS_MAX_COLLISION)) {
596 outw(BASE + EP_COMMAND, TX_RESET);
597 if (status & TXS_UNDERRUN) {
598 #ifdef EP_LOCAL_STATS
602 if (status & TXS_JABBER);
603 else /* TXS_MAX_COLLISION - we shouldn't get here */
604 ++ifp->if_collisions;
607 outw(BASE + EP_COMMAND, TX_ENABLE);
609 * To have a tx_avail_int but giving the chance to the
612 if (!ifq_is_empty(&ifp->if_snd))
613 outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | 8);
615 outb(BASE + EP_W1_TX_STATUS, 0x0); /* pops up the next
618 ifp->if_flags &= ~IFF_OACTIVE;
620 inw(BASE + EP_W1_FREE_TX);
622 } /* end TX_COMPLETE */
625 outw(BASE + EP_COMMAND, C_INTR_LATCH); /* ACK int Latch */
627 if ((status = inw(BASE + EP_STATUS)) & S_5_INTS)
631 outw(BASE + EP_COMMAND, SET_INTR_MASK | S_5_INTS);
635 epread(struct ep_softc *sc)
637 struct mbuf *top, *mcur, *m;
641 short rx_fifo2, status;
644 ifp = &sc->arpcom.ac_if;
645 status = inw(BASE + EP_W1_RX_STATUS);
649 if (status & ERR_RX) {
651 if (status & ERR_RX_OVERRUN) {
653 * we can think the rx latency is actually greather than we
656 #ifdef EP_LOCAL_STATS
657 if (EP_FTST(sc, F_RX_FIRST))
665 rx_fifo = rx_fifo2 = status & RX_BYTES_MASK;
667 if (EP_FTST(sc, F_RX_FIRST)) {
668 m = m_getl(rx_fifo, MB_DONTWAIT, MT_DATA, M_PKTHDR, NULL);
671 sc->top = sc->mcur = top = m;
672 #define EROUND ((sizeof(struct ether_header) + 3) & ~3)
673 #define EOFF (EROUND - sizeof(struct ether_header))
676 /* Read what should be the header. */
677 insw(BASE + EP_W1_RX_PIO_RD_1,
678 mtod(top, caddr_t), sizeof(struct ether_header) / 2);
679 top->m_len = sizeof(struct ether_header);
680 rx_fifo -= sizeof(struct ether_header);
681 sc->cur_len = rx_fifo2;
683 /* come here if we didn't have a complete packet last time */
686 sc->cur_len += rx_fifo2;
689 /* Reads what is left in the RX FIFO */
690 while (rx_fifo > 0) {
691 lenthisone = min(rx_fifo, M_TRAILINGSPACE(m));
692 if (lenthisone == 0) { /* no room in this one */
694 m = m_getl(rx_fifo, MB_DONTWAIT, MT_DATA, 0, NULL);
699 lenthisone = min(rx_fifo, M_TRAILINGSPACE(m));
701 if (EP_FTST(sc, F_ACCESS_32_BITS)) { /* default for EISA configured cards*/
702 insl(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len,
704 m->m_len += (lenthisone & ~3);
706 insb(BASE + EP_W1_RX_PIO_RD_1,
707 mtod(m, caddr_t) + m->m_len,
709 m->m_len += (lenthisone & 3);
711 insw(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len,
713 m->m_len += lenthisone;
715 *(mtod(m, caddr_t) + m->m_len - 1) = inb(BASE + EP_W1_RX_PIO_RD_1);
717 rx_fifo -= lenthisone;
720 if (status & ERR_RX_INCOMPLETE) { /* we haven't received the complete
723 #ifdef EP_LOCAL_STATS
724 sc->rx_no_first++; /* to know how often we come here */
726 EP_FRST(sc, F_RX_FIRST);
727 if (!((status = inw(BASE + EP_W1_RX_STATUS)) & ERR_RX_INCOMPLETE)) {
728 /* we see if by now, the packet has completly arrived */
731 outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_NEXT_EARLY_THRESH);
734 outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
736 EP_FSET(sc, F_RX_FIRST);
737 top->m_pkthdr.rcvif = &sc->arpcom.ac_if;
738 top->m_pkthdr.len = sc->cur_len;
740 ifp->if_input(ifp, top);
742 while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
743 outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_INIT_EARLY_THRESH);
747 outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
751 #ifdef EP_LOCAL_STATS
755 EP_FSET(sc, F_RX_FIRST);
756 while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
757 outw(BASE + EP_COMMAND, SET_RX_EARLY_THRESH | RX_INIT_EARLY_THRESH);
761 ep_ifmedia_upd(struct ifnet *ifp)
763 struct ep_softc * sc = ifp->if_softc;
767 outw(BASE + EP_COMMAND, STOP_TRANSCEIVER);
769 outw(BASE + EP_W4_MEDIA_TYPE, DISABLE_UTP);
772 switch (IFM_SUBTYPE(sc->ifmedia.ifm_media)) {
774 if (sc->ep_connectors & UTP) {
775 i = ACF_CONNECTOR_UTP;
777 outw(BASE + EP_W4_MEDIA_TYPE, ENABLE_UTP);
781 if (sc->ep_connectors & BNC) {
782 i = ACF_CONNECTOR_BNC;
783 outw(BASE + EP_COMMAND, START_TRANSCEIVER);
784 DELAY(DELAY_MULTIPLE * 1000);
788 if (sc->ep_connectors & AUI)
789 i = ACF_CONNECTOR_AUI;
792 i = sc->ep_connector;
793 if_printf(ifp, "strange connector type in EEPROM: "
799 j = inw(BASE + EP_W0_ADDRESS_CFG) & 0x3fff;
800 outw(BASE + EP_W0_ADDRESS_CFG, j | (i << ACF_CONNECTOR_BITS));
806 ep_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
808 struct ep_softc * sc = ifp->if_softc;
810 ifmr->ifm_active = sc->ifmedia.ifm_media;
816 ep_if_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data, struct ucred *cr)
818 struct ep_softc * sc = ifp->if_softc;
819 struct ifreq * ifr = (struct ifreq *)data;
826 if (((ifp->if_flags & IFF_UP) == 0) &&
827 (ifp->if_flags & IFF_RUNNING)) {
828 ifp->if_flags &= ~IFF_RUNNING;
831 /* reinitialize card on any parameter change */
837 bcopy((caddr_t) sc->sc_addr, (caddr_t) & ifr->ifr_data,
838 sizeof(sc->sc_addr));
844 * The Etherlink III has no programmable multicast
845 * filter. We always initialize the card to be
846 * promiscuous to multicast, since we're always a
847 * member of the ALL-SYSTEMS group, so there's no
848 * need to process SIOC*MULTI requests.
854 if (!sc->epb.mii_trans) {
855 error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, cmd);
861 error = ether_ioctl(ifp, cmd, data);
871 ep_if_watchdog(struct ifnet *ifp)
873 struct ep_softc *sc = ifp->if_softc;
876 if_printf(ifp, "watchdog\n");
878 log(LOG_ERR, "%s: watchdog\n", ifp->if_xname);
886 ifp->if_flags &= ~IFF_OACTIVE;
888 ep_intr(ifp->if_softc);
892 epstop(struct ep_softc *sc)
898 outw(BASE + EP_COMMAND, RX_DISABLE);
899 outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
900 while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
901 outw(BASE + EP_COMMAND, TX_DISABLE);
902 outw(BASE + EP_COMMAND, STOP_TRANSCEIVER);
903 outw(BASE + EP_COMMAND, RX_RESET);
904 outw(BASE + EP_COMMAND, TX_RESET);
905 while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
906 outw(BASE + EP_COMMAND, C_INTR_LATCH);
907 outw(BASE + EP_COMMAND, SET_RD_0_MASK);
908 outw(BASE + EP_COMMAND, SET_INTR_MASK);
909 outw(BASE + EP_COMMAND, SET_RX_FILTER);