3 # Copyright (c) 1990 The Regents of the University of California.
6 # Written and contributed by W. Jolitz 12/90
8 # Redistribution and use in source and binary forms are permitted provided
9 # that: (1) source distributions retain this entire copyright notice and
10 # comment, and (2) distributions including binaries display the following
11 # acknowledgement: ``This product includes software developed by the
12 # University of California, Berkeley and its contributors'' in the
13 # documentation or other materials provided with the distribution and in
14 # all advertising materials mentioning features or use of this software.
15 # Neither the name of the University nor the names of its contributors may
16 # be used to endorse or promote products derived from this software without
17 # specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
19 # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
22 # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
23 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.57 2003/02/10 11:35:53 simokawa Exp $
24 # $DragonFly: src/etc/MAKEDEV,v 1.17 2005/02/26 12:00:54 swildner Exp $
26 # Device "make" file. Valid arguments:
27 # all makes all known devices, standard number of units (or close)
28 # std standard devices
29 # jail suitable for a jail(8)
30 # local configuration specific devices
31 # mach-4 mach4&lites+devices for Mach's XFree86 distribution
32 # (see http://www.cs.hut.fi/lites.html for more info on LITES)
35 # ast* ATAPI tape drives
36 # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
37 # sa* SCSI Sequential Access Devices
40 # aac* Adaptec FSA RAID controllers
41 # aacd* Adaptec FSA RAID
42 # acd* ATAPI CD-ROM disks
44 # afd* ATAPI floppy disks
46 # cd* SCSI CD-ROM disks
47 # da* SCSI Direct Access Devices
48 # fd* floppy disk drives (3 1/2", 5 1/4")
49 # fla* M-Systems DiskOnChip
50 # idad* Compaq Smart-2 RAID arrays
51 # ips* IBM ServeRAID controller
53 # mcd* Mitsumi CD-ROM disks
54 # md* Memory (or malloc) disk
55 # mlx* Mylex DAC960 RAID controllers
56 # mlxd* Mylex DAC960 RAID disk volumes
57 # pst* Promise SuperTrak RAID disks
58 # scd* Sony CD-ROM disks
62 # vty* virtual console devices for syscons/pcvt/codrv
65 # mse* Logitech and ATI Inport bus mouse
67 # jogdial Sony VAIO Jogdial
68 # sysmouse Mousesystems mouse emulator for syscons
71 # refclock-* serial ports used by xntpd parse refclocks
74 # tty* general purpose serial ports
75 # cua* dialout serial ports
76 # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
77 # cuaA* Specialix SI/XIO dialout ports
78 # ttyD* Digiboard - 16 dialin ports
79 # cuaD* Digiboard - 16 dialout ports
80 # ttyE* Stallion EasyIO (stl) dialin ports
81 # cuaE* Stallion EasyIO (stl) dialout ports
82 # ttyF* Stallion Brumby (stli) dialin ports
83 # cuaF* Stallion Brumby (stli) dialout ports
84 # ttyR* Rocketport dialin ports
85 # cuaR* Rocketport dialout ports
87 # stlN Stallion EasyIO board N dialin and dialout
88 # stliN Stallion Brumby board N dialin and dialout
91 # pty* set of 32 master and slave pseudo terminals
92 # vty* virtual terminals using syscons/pcvt/codrv console
96 # ppi* Parallel port i/o
97 # pps* Pulse per second timing interface
98 # pcfclock* Parallel time sync interface
105 # usb* USB bus control device
106 # ucom* USB serial devices
107 # ugen* generic USB device
108 # uhid* Human Interface Device (HID)
112 # urio* Diamond Rio 500
113 # uscanner* USB scanners
115 # SCSI devices (other than CD-ROM, tape and disk):
116 # ch* SCSI Media-Changer (juke box) driver
117 # pt* Processor Type (HP scanner, as one example)
118 # pass* CAM Passthrough device
119 # ses* SES (SCSI Environmental Services) and
120 # SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
122 # PC-CARD (previously called PCMCIA) support
123 # card* PC-CARD slots
126 # i4b isdnd call control device
127 # i4bctl debugging control device
128 # i4btrc* trace data interface(s), one per passive card
129 # i4btel* telephony interface(s)
130 # i4bteld* telephony dialout interface(s)
131 # i4brbch* raw b channel access device(s)
133 # Special purpose devices:
134 # acpi ACPI control device
135 # apm Advanced Power Management BIOS
136 # apmctl APM BIOS control device
138 # crypto crypto interface
140 # tw* xten power controller
141 # snd* various sound cards
142 # pcaudio PCM audio driver
143 # socksys iBCS2 socket system driver
144 # vat VAT compatibility audio driver (requires snd*)
145 # gsc Genius GS-4500 hand scanner
147 # tun* Tunneling IP device
148 # tap* Ethernet Tunneling device
149 # snp* tty snoop devices
150 # spigot Video Spigot video acquisition card
151 # ctx* Cortex-I video acquisition card
152 # meteor* Matrox Meteor video acquisition card (pci)
153 # bktr* Bt848 based video acquisition card (pci)
154 # labpc* National Instrument's Lab-PC and LAB-PC+
155 # perfmon CPU performance-monitoring counters
156 # pci PCI configuration-space access from user mode
157 # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
158 # kbd keyboard devices
159 # elan-mmcr AMD Elan support (e.g. mmap MMCR)
160 # agpgart AGP interface
161 # cfs* Coda Distributed Filesystem
162 # nsmb* SMB/CIFS protocol interface
163 # pf PF packet filter
166 if [ -n "$MAKEDEVPATH" ]; then
173 # Usage: die exitcode msg
179 # Convert integer to partition name
184 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
185 8) p=i;; 9) p=j;; 10) p=k;; 11) p=l;; 12) p=m;; 13) p=n;; 14) p=o;; 15) p=p;;
191 # Convert integer to slice name
203 # Convert disk (type, unit, slice, partition) to minor number
206 echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | ($4 & 7) | ($4 & 8) << 17))
209 # Override mknod(2) to add extra handling to it.
211 for i in `IFS=':'; echo $PATH`; do
212 if [ -x "${i}/mknod" ]; then
220 4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";;
221 5) "$mknod" "$@" || die 2 "$mknod $@ failed";;
222 *) die 2 "bad node: mknod $@";;
226 # Convert tape (ctrl, unit, mode, access) to minor number
229 echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
232 # Convert the last character of a tty name to a minor number.
237 a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
238 h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
239 o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
246 # Convert a unit number to a minor number.
249 echo $(((($1 >> 8) << 16) | ($1 % 256)))
252 # For the stallion devices tty[EF]
253 # stallion major letter card iscallout
266 if [ $iscallout -gt 0 ]; then
274 *) die 1 "Invalid stl card number $card";;
277 # make the mem interface for extracting stats & loading microcode.
278 # 0x1000000 + card number
279 mknod staliomem$card c $major 0x0100000$card
281 while [ $port -lt $maxport ]; do
282 minor=$(($minorbase + $card * 1048576 + $port))
283 if [ $port -ge 32 ]; then
284 minor=$(($minor + 65504))
286 unit=$(($card * 64 + $port))
288 mknod ${pref}${letter}$unit c $major $minor $owner
289 mknod ${pref}i${letter}$unit c $major $(($minor + 32)) $owner
290 mknod ${pref}l${letter}$unit c $major $(($minor + 64)) $owner
295 # Raw partition for disks
298 # Compatibility slice for disks
301 # Raw slice for disks
305 disk_umask=037 # allow group operator to read disks
306 tape_umask=017 # allow group operator to read/write tapes
312 sh MAKEDEV std # standard
313 sh MAKEDEV fd0 fd1 # bdev, floppy disk
314 sh MAKEDEV da0 da1 da2 da3 da4 da5 da6 da7 # bdev, SCSI disk
315 sh MAKEDEV da8 da9 da10 da11 da12 da13 da14 # bdev, SCSI disk
316 sh MAKEDEV da15 # bdev, SCSI disk
317 sh MAKEDEV ata # cdev, ATA control
318 sh MAKEDEV ad0 ad1 ad2 ad3 ad4 ad5 ad6 ad7 # bdev, ATA disk
319 sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk
320 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
321 sh MAKEDEV vn0 # bdev, virtual disk
322 sh MAKEDEV cd0 mcd0 scd0 # bdev, cdrom
323 sh MAKEDEV sa0 wt0 # bdev, tape
324 sh MAKEDEV vty12 # cdev, virtual tty
325 sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
326 sh MAKEDEV pty0 # cdev, pseudo tty
327 sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
328 sh MAKEDEV zs0 # big-Alpha serial tty
329 sh MAKEDEV kbd0 kbd1 # cdev, keyboard
330 sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse
331 sh MAKEDEV pcaudio speaker snd0 # cdev, noise
332 sh MAKEDEV ipsd0 # cdev, ServeRAID disk
333 sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
334 sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
335 sh MAKEDEV iic0 iic1 # cdev, I2C device
336 sh MAKEDEV smb0 smb1 # cdev, SMBus device
337 sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
338 sh MAKEDEV usb1 uhid1 ums1 ulpt1 ugen1 # cdev, USB devices
339 sh MAKEDEV usb2 usb3 usb4 usb5 # cdev, USB devices
340 sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too
341 sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
342 sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
343 sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
344 sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
345 sh MAKEDEV acpi # cdev, laptop
346 sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
347 sh MAKEDEV pass4 xpt2 # cdev, CAM
348 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
349 sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
350 sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
351 sh MAKEDEV agpgart # cdev, AGP
352 sh MAKEDEV nsmb0 # cdev, SMB/CIFS
353 sh MAKEDEV twed0 # 3ware
354 sh MAKEDEV crypto # cdev, crypto
355 sh MAKEDEV fw0 # cdev, firewire
356 sh MAKEDEV dcons # cdev, dcons
360 # a much restricted set of the above, to save precious i-nodes on the
363 sh MAKEDEV std # standard
364 sh MAKEDEV fd0 # bdev, floppy disk
365 sh MAKEDEV da0 # bdev, SCSI disk
366 sh MAKEDEV ad0 # bdev, ATA disk
367 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
368 sh MAKEDEV vn0 # bdev, virtual disk
369 sh MAKEDEV cd0 # bdev, cdrom
370 sh MAKEDEV sa0 # bdev, tape
371 sh MAKEDEV vty2 # cdev, virtual tty
372 sh MAKEDEV cuaa0 # cdev, serial tty
373 sh MAKEDEV pty0 # cdev, pseudo tty
374 sh MAKEDEV ttyd0 # cdev, serial tty
375 sh MAKEDEV zs0 # big-Alpha serial tty
376 sh MAKEDEV kbd0 # cdev, keyboard
377 sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
378 sh MAKEDEV lpt0 # cdev, printer
379 sh MAKEDEV ppi0 # cdev, parallel port
380 sh MAKEDEV iic0 # cdev, I2C device
381 sh MAKEDEV smb0 # cdev, SMBus device
382 sh MAKEDEV ums0 # cdev, USB devices
383 sh MAKEDEV tun0 # cdev, network
384 sh MAKEDEV tap0 # cdev, network
385 sh MAKEDEV ch0 # cdev, miscellaneous
386 sh MAKEDEV apm apmctl card0 # cdev, laptop
387 sh MAKEDEV pass1 xpt1 # cdev, CAM
388 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
389 sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
390 sh MAKEDEV i4brbch0 # cdev, ISDN
395 mknod console c 0 0; chmod 600 console
396 mknod kmem c 2 1 root:kmem; chmod 640 kmem
397 mknod mem c 2 0 root:kmem; chmod 640 mem
398 mknod null c 2 2; chmod 666 null
399 mknod random c 2 3; chmod 644 random
400 mknod urandom c 2 4; chmod 644 urandom
401 mknod zero c 2 12; chmod 666 zero
402 mknod io c 2 14; chmod 600 io
403 mknod tty c 1 0; chmod 666 tty
404 mknod klog c 7 0; chmod 600 klog
405 mknod stdin c 22 0; chmod 666 stdin
406 mknod stdout c 22 1; chmod 666 stdout
407 mknod stderr c 22 2; chmod 666 stderr
408 mknod pci c 78 0; chmod 644 pci
411 while [ $i -lt 64 ]; do
422 rm mem kmem pci io klog console # for security
423 ln -sf null mem # for libkvm (ab)users
424 ln -sf null kmem # --//--
433 mknod timezone c 26 0
436 # Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
439 u=`expr $i : '..\(.*\)'`
440 if [ -z "${u}" ]; then u=0; fi
441 # default density, 512b blocks
442 mknod rwt${u} c 10 $(( 0 + $u)) root:operator
443 mknod nrwt${u} c 10 $(( 4 + $u)) root:operator
444 # default density, 1024b blocks
445 # mknod rWt${u} c 10 $((64 + $u)) root:operator
446 # mknod nrWt${u} c 10 $((68 + $u)) root:operator
447 mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes
448 mknod nrwt${u}b c 10 $((20 + $u)) root:operator
449 mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes
450 mknod nrwt${u}c c 10 $((28 + $u)) root:operator
451 mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes
452 mknod nrwt${u}d c 10 $((36 + $u)) root:operator
453 # mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes?
454 # mknod nrwt${u}e c 10 $((44 + $u)) root:operator
455 # mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes?
456 # mknod nrwt${u}f c 10 $((52 + $u)) root:operator
461 aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|ipsd*s*|md*s*|mlxd*s*|pst*s*|twed*s*|vn*s*)
464 aacd*s*) name=aacd; chr=151;;
465 ad*s*) name=ad; chr=116;;
466 ar*s*) name=ar; chr=157;;
467 afd*s*) name=afd; chr=118;;
468 amrd*s*) name=amrd; chr=133;;
469 da*s*) name=da; chr=13;;
470 fla*s*) name=fla; chr=102;;
471 idad*s*) name=idad; chr=109;;
472 ipsd*s*) name=ipsd; chr=176;;
473 md*s*) name=md; chr=95;;
474 mlxd*s*) name=mlxd; chr=131;;
475 pst*s*) name=pst; chr=168;;
476 twed*s*) name=twed; chr=147;;
477 vn*s*) name=vn; chr=43;;
480 aacd*s*|amrd*s*|idad*s*|ipsd*s*|mlxd*s*|twed*s*)
481 unit=`expr $i : '....\([0-9]*\)s'`
482 slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
483 part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
485 afd*s*|fla*s*|pst*s*|wfd*s*)
486 unit=`expr $i : '...\([0-9]*\)s'`
487 slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
488 part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
491 unit=`expr $i : '..\([0-9]*\)s'`
492 slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
493 part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
497 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
502 slicename=`dkitos $slice`
503 minor=`dkminor 0 $unit $slice $dkrawpart`
504 mknod $name$unit$slicename c $chr $minor root:operator
505 rm -f r$name$unit$slicename
509 0) slice=$oldslice ;;
511 for part in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
513 minor=`dkminor 0 $unit $slice $part`
514 partname=`dkitop $part`
515 mknod $name$unit$slicename$partname \
516 c $chr $minor root:operator
517 rm -f r$name$unit$slicename$partname
523 echo bad partition for disk in: $i
528 echo bad slice for disk in: $i
533 echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
541 unit=`expr $i : '..\(.*\)'`
545 mknod ${name}${unit} c $chr $(($unit * 64)) root:operator
546 rm -f r${name}${unit}
547 # Fake BSD partitions
548 for i in a b c d e f g h
550 ln -f ${name}${unit} ${name}${unit}$i
551 rm -f r${name}${unit} r${name}${unit}$i
553 # User-readable and programmer-readable name sets
555 mknod ${name}${unit}.1720 c $chr $(($unit * 64 + 1)) \
557 rm -f r${name}${unit}.1720
558 # ln -f ${name}${unit}.1720 ${name}${unit}135hs21
559 # rm -f r${name}${unit}135hs21
561 mknod ${name}${unit}.1480 c $chr $(($unit * 64 + 2)) \
563 rm -f r${name}${unit}.1480
564 # ln -f ${name}${unit}.1480 ${name}${unit}135hs18
565 # rm -f r${name}${unit}135hs18
566 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18
567 # rm -f r${name}${unit}96hs18
569 mknod ${name}${unit}.1440 c $chr $(($unit * 64 + 3)) \
571 rm -f r${name}${unit}.1440
572 # ln -f ${name}${unit}.1440 ${name}${unit}135
573 # rm -f r${name}${unit}135
574 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18
575 # rm -f r${name}${unit}135ds18
576 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18
577 # rm -f r${name}${unit}96ds18
579 mknod ${name}${unit}.1200 c $chr $(($unit * 64 + 4)) \
581 rm -f r${name}${unit}.1200
582 # ln -f ${name}${unit}.1200 ${name}${unit}96
583 # rm -f r${name}${unit}96
584 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15
585 # rm -f r${name}${unit}96ds15
586 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15
587 # rm -f r${name}${unit}135ds15
589 mknod ${name}${unit}.820 c $chr $(($unit * 64 + 5)) \
591 rm -f r${name}${unit}.820
592 # ln -f ${name}${unit}.820 ${name}${unit}96hs10
593 # rm -f r${name}${unit}96hs10
594 # ln -f ${name}${unit}.820 ${name}${unit}135hs10
595 # rm -f r${name}${unit}135hs10
597 mknod ${name}${unit}.800 c $chr $(($unit * 64 + 6)) \
599 rm -f r${name}${unit}.800
600 # ln -f ${name}${unit}.800 ${name}${unit}96ds10
601 # rm -f r${name}${unit}96ds10
602 # ln -f ${name}${unit}.800 ${name}${unit}135ds10
603 # rm -f r${name}${unit}135ds10
605 mknod ${name}${unit}.720 c $chr $(($unit * 64 + 7)) \
607 rm -f r${name}${unit}.720
608 # ln -f ${name}${unit}.720 ${name}${unit}96ds9
609 # rm -f r${name}${unit}96ds9
610 # ln -f ${name}${unit}.720 ${name}${unit}135ds9
611 # rm -f r${name}${unit}135ds9
613 mknod ${name}${unit}.360 c $chr $(($unit * 64 + 8)) \
615 rm -f r${name}${unit}.360
616 # ln -f ${name}${unit}.360 ${name}${unit}48
617 # rm -f r${name}${unit}48
618 # ln -f ${name}${unit}.360 ${name}${unit}48ds9
619 # rm -f r${name}${unit}48ds9
621 mknod ${name}${unit}.640 c $chr $(($unit * 64 + 9)) \
623 rm -f r${name}${unit}.640
624 # ln -f ${name}${unit}.640 ${name}${unit}96ds8
625 # rm -f r${name}${unit}96ds8
626 # ln -f ${name}${unit}.640 ${name}${unit}135ds8
627 # rm -f r${name}${unit}135ds8
629 mknod ${name}${unit}.1232 c $chr $(($unit * 64 + 10)) \
631 rm -f r${name}${unit}.1232
632 # ln -f ${name}${unit}.1232 ${name}${unit}96ds8
633 # rm -f r${name}${unit}96ds8
634 # ln -f ${name}${unit}.1232 ${name}${unit}135ds8
635 # rm -f r${name}${unit}135ds8
638 echo bad unit for disk in: $i
644 aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|ipsd*|md*|mlxd*|pst*|twed*|vn*)
647 aacd*) name=aacd; chr=151;;
648 ad*) name=ad; chr=116;;
649 ar*) name=ar; chr=157;;
650 afd*) name=afd; chr=118;;
651 amrd*) name=amrd; chr=133;;
652 da*) name=da; chr=13;;
653 fla*) name=fla; chr=102;;
654 idad*) name=idad; chr=109;;
655 ipsd*) name=ipsd; chr=176;;
656 md*) name=md; chr=95;;
657 mlxd*) name=mlxd; chr=131;;
658 pst*) name=pst; chr=168;;
659 twed*) name=twed; chr=147;;
660 vn*) name=vn; chr=43;;
663 aacd*|amrd*|idad*|ipsd*|mlxd*|twed*)
664 unit=`expr $i : '....\(.*\)'`
667 unit=`expr $i : '...\(.*\)'`
670 unit=`expr $i : '..\(.*\)'`
674 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
675 for slicepartname in s0h s1h s2 s3 s4
677 sh MAKEDEV $name$unit$slicepartname
681 echo bad unit for disk in: $i
691 unit=`expr $i : '...\(.*\)'`
693 [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
694 for part in 0 1 2 3 4 5 6 7
696 minor=`dkminor 0 $unit 0 $part`
697 partname=`dkitop $part`
698 mknod $name$unit$partname c $chr $minor root:operator
699 rm -f r$name$unit$partname
703 echo bad unit for disk in: $i
709 # SCSI processor type driver
713 unit=`expr $i : 'pt\([0-9][0-9]*\)'`
714 if [ -z "${unit}" ]; then
717 unit=$(($unit + 1 - 1))
718 mknod ${name}${unit} c $chr `unit2minor $unit`
721 # SCSI SES/SAF-TE type driver
725 unit=`expr $i : 'ses\([0-9][0-9]*\)'`
726 if [ -z "${unit}" ]; then
729 unit=$(($unit + 1 - 1))
730 mknod ${name}${unit} c $chr `unit2minor $unit`
732 # SCSI target mode sample driver
736 unit=`expr $i : 'targ\([0-9][0-9]*\)'`
737 if [ -z "${unit}" ]; then
740 unit=$(($unit + 1 - 1))
741 mknod ${name}${unit} c $chr `unit2minor $unit`
742 mknod ${name}.ctl c $chr 0xffff00ff
745 # CAM transport layer device
747 # This major number is temporary
750 units=`expr $i : 'xpt\(.*\)'`
751 if [ -z "${units}" ]; then
755 while [ $i -lt $units ]; do
758 mknod $dname c $chr `unit2minor $i` root:operator
763 # CAM passthrough device
765 # This major number is temporary
768 units=`expr $i : 'pass\(.*\)'`
769 if [ -z "${units}" ]; then
773 while [ $i -lt $units ]; do
776 mknod $dname c $chr `unit2minor $i` root:operator
781 class=`expr $i : 'pty\(.*\)'`
784 1) offset=32 name=q;;
785 2) offset=64 name=r;;
786 3) offset=96 name=s;;
787 # Note that xterm (at least) only look at p-s.
788 4) offset=128 name=P;;
789 5) offset=160 name=Q;;
790 6) offset=192 name=R;;
791 7) offset=224 name=S;;
792 # This still leaves [tuTU].
793 *) echo bad unit for pty in: $i;;
799 while [ $i -lt 32 ]; do
800 # This was an awk substr() before.
801 c=$(echo 0123456789abcdefghijklmnopqrstuv |
802 dd bs=1 skip=$i count=1 2>/dev/null)
803 mknod tty$name$c c 5 $(($offset + $i))
804 mknod pty$name$c c 6 $(($offset + $i))
814 unit=`expr $i : '..\(.*\)'`
818 [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
819 mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
820 ln -f sa${unit}.ctl rsa${unit}.ctl
823 mknod sa${unit}.${m} c $chr \
824 `saminor 0 ${unit} ${m} 0` root:operator
825 ln -f sa${unit}.${m} rsa${unit}.${m}
826 mknod nsa${unit}.${m} c $chr \
827 `saminor 0 ${unit} ${m} 1` root:operator
828 ln -f nsa${unit}.${m} nrsa${unit}.${m}
829 mknod esa${unit}.${m} c $chr \
830 `saminor 0 ${unit} ${m} 2` root:operator
831 ln -f esa${unit}.${m} ersa${unit}.${m}
833 ln -f sa${unit}.0 sa${unit}
834 ln -f sa${unit}.0 rsa${unit}.0
835 ln -f sa${unit}.0 rsa${unit}
836 ln -f nsa${unit}.0 nsa${unit}
837 ln -f nsa${unit}.0 nrsa${unit}.0
838 ln -f nsa${unit}.0 nrsa${unit}
839 ln -f esa${unit}.0 esa${unit}
840 ln -f esa${unit}.0 ersa${unit}.0
841 ln -f esa${unit}.0 ersa${unit}
844 echo bad unit for tape in: $i
852 unit=`expr $i : '..\(.*\)'`
854 ch*) name=ch; chr=17;;
858 mknod ${name}${unit} c $chr $unit root:operator
861 echo bad unit for media changer in: $i
868 mknod ata c 159 0 root:operator
872 unit=`expr $i : '...\(.*\)'`
876 mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator
878 mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator
879 chmod 640 nast${unit}
882 echo bad unit for tape in: $i
890 units=`expr $i : '...\(.*\)t'`;
891 tracks=`expr $i : '.*t\(.*\)'`;
894 if [ -z "${units}" ]; then
897 if [ -z "${tracks}" ]; then
900 if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then
902 while [ $i -le $units ]; do
906 while [ $j -le ${tracks} ]; do
907 mknod ${dname}t$j c $chr \
908 $((($i * 8) + (65536 * $j))) \
915 echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
923 acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
924 cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
925 mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
926 scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
928 if [ -z "${units}" ]; then
931 if [ "${units}" -le 31 ]; then
933 while [ $i -le $units ]; do
936 mknod ${dname}a c $chr $(($i * 8)) root:operator
939 ln -f ${dname}a ${dname}c;;
941 mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator;;
948 echo "$i is invalid -- can't have more than 32 cd devices"
954 unit=`expr $i : 'iic\(.*\)'`
955 mknod iic$unit c 105 `unit2minor $unit`
959 unit=`expr $i : 'smb\(.*\)'`
960 mknod smb$unit c 106 `unit2minor $unit`
964 unit=`expr $i : 'pcfclock\(.*\)'`
965 mknod pcfclock$unit c 140 `unit2minor $unit`
969 unit=`expr $i : 'ppi\(.*\)'`
970 mknod ppi$unit c 82 `unit2minor $unit`
974 unit=`expr $i : 'pps\(.*\)'`
975 mknod pps$unit c 89 `unit2minor $unit`
979 mknod usb c 108 255 root:operator
985 unit=`expr $i : 'usb\(.*\)'`
986 mknod usb$unit c 108 `unit2minor $unit` root:operator
992 unit=`expr $i : 'ucom\(.*\)'`
993 minor=$(($unit + 128))
994 minor=`unit2minor $(($unit + 128))`
995 mknod ucom$unit c 138 $minor uucp:dialer
1001 unit=`expr $i : 'uhid\(.*\)'`
1002 mknod uhid$unit c 122 `unit2minor $unit` root:operator
1008 unit=`expr $i : 'ums\(.*\)'`
1009 mknod ums$unit c 111 `unit2minor $unit` root:operator
1014 unit=`expr $i : 'ulpt\(.*\)'`
1015 minor=`unit2minor $unit`
1016 mknod ulpt$unit c 113 $minor
1017 minor=`unit2minor $(($unit + 64))`
1018 mknod unlpt$unit c 113 $minor # and the 'no prime' version
1023 unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
1024 endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
1025 if [ -z "${unit}" ]; then
1026 echo $i - Invalid unit number
1028 if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
1029 mknod ugen$unit c 114 \
1030 `unit2minor $(($unit * 16))` root:operator
1032 while [ $i -lt 16 ]; do
1033 mknod ugen$unit.$i c 114 \
1034 `unit2minor $(($unit * 16 + $i))` root:operator
1038 minor=`unit2minor $(($unit * 16 + $endpoint))`
1039 mknod ugen$unit.$endpoint c 114 $minor root:operator
1046 unit=`expr $i : 'urio\(.*\)'`
1047 mknod urio$unit c 143 `unit2minor $unit` root:operator
1053 unit=`expr $i : 'uscanner\(.*\)'`
1054 mknod uscanner$unit c 156 `unit2minor $unit` root:operator
1060 unit=`expr $i : 'umodem\(.*\)'`
1061 mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer
1066 unit=`expr $i : 'lpt\(.*\)'`
1067 mknod lpt$unit c 16 `unit2minor $unit`
1068 mknod lpctl$unit c 16 `unit2minor $(($unit + 128))`
1071 # Use this to create virtual consoles for syscons, pcvt or codrv
1073 # use as MAKEDEV vtyNN to create NN entries
1076 units=`expr $i : 'vty\(.*\)'`
1078 while [ $i -lt $units ]; do
1079 mknod ttyv$(printf %01x $i) c $chr `unit2minor $i`
1082 ln -fs ttyv0 vga # XXX X still needs this pccons relic
1086 units=`expr $i : 'nmdm\(.*\)'`
1089 while [ $i -lt $units ]; do
1090 minor=`unit2minor $i`
1091 minor=$(($minor + $minor))
1092 mknod nmdm${i}A c $chr $minor
1093 mknod nmdm${i}B c $chr $(($minor + 1))
1099 nbpf=`expr $i : 'bpf\(.*\)$'`
1101 while [ $unit -le $nbpf ]; do
1102 mknod bpf$unit c 23 `unit2minor $unit`
1108 mknod speaker c 26 0
1113 unit_low=`expr $i : 'cua.*\(.\)$'`
1120 unit_high=`expr $i : 'cuaa\(.\).$'`
1121 m_high=`ttyminor $unit_high`
1124 unit=$unit_high$unit_low
1125 m=$(($m_high << 16 | `ttyminor $unit_low`))
1126 mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer
1127 mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer
1128 mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer
1133 mknod crypto c 70 0 root:operator
1137 mknod pf c 73 0 root:operator
1141 unit=`expr $i : 'fw\(.\)$'`
1144 minor=$(($unit << 16 | $sub))
1145 mknod fw$unit.$sub c 127 $minor root:operator
1146 chmod 660 fw$unit.$sub
1147 mknod fwmem$unit.$sub c 127 $((1<<24 | $minor)) root:operator
1148 chmod 660 fwmem$unit.$sub
1150 ln -sf fw$unit.0 fw$unit
1151 ln -sf fwmem$unit.0 fwmem$unit
1155 mknod dcons c 184 0 root:wheel
1159 tty?|tty0?|ttyd?|ttyd??)
1160 unit_low=`expr $i : 'tty.*\(.\)$'`
1167 unit_high=`expr $i : 'ttyd\(.\).$'`
1168 m_high=`ttyminor $unit_high`
1171 unit=$unit_high$unit_low
1172 m=$(($m_high << 16 | `ttyminor $unit_low`))
1173 mknod ttyd$unit c 28 $m
1174 mknod ttyid$unit c 28 $(($m | 32))
1175 mknod ttyld$unit c 28 $(($m | 64))
1180 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1181 g h i j k l m n o p q r s t u v"
1183 card=`expr $i : 'cua.*\(.\)$'`
1184 for unit in $portlist
1186 minor=`ttyminor $unit`
1187 minor=$(($card * 65536 + $minor))
1189 mknod cuac$name c $major $(($minor + 128)) uucp:dialer
1190 mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer
1191 mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer
1197 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1198 g h i j k l m n o p q r s t u v"
1200 card=`expr $i : 'tty.*\(.\)$'`
1201 for unit in $portlist
1203 minor=`ttyminor $unit`
1204 minor=$(($card * 65536 + $minor))
1206 mknod ttyc$name c $major $minor
1207 mknod ttyic$name c $major $(($minor + 32))
1208 mknod ttylc$name c $major $(($minor + 64))
1212 # RISCom8 'rc' driver entries
1216 unit=`expr $i : 'cua.*\(.\)$'`
1218 mknod cuam$unit c 63 $(($m + 128)) uucp:dialer
1223 unit=`expr $i : 'tty.*\(.\)$'`
1225 mknod ttym$unit c 63 $m
1229 # Note: these are 'base 1' to match the numbers on the panels, and to match
1230 # the manual that comes with the system.
1233 nports=`expr $i : 'ttyA\(.*\)$'`
1235 while [ $port -le $nports ]; do
1236 minor=$(($port - 1))
1237 name=$(printf %02d $port)
1238 mknod ttyA$name c $major $minor
1239 mknod ttyiA$name c $major $(($minor + 65536))
1240 mknod ttylA$name c $major $(($minor + 131072))
1243 # For the user-mode control program, 'sicontrol'
1244 mknod si_control c 68 262144
1250 nports=`expr $i : 'cuaA\(.*\)$'`
1252 while [ $port -le $nports ]; do
1253 minor=$(($port - 1))
1254 name=$(printf %02d $port)
1255 mknod cuaA$name c $major $(($minor + 128)) uucp:dialer
1256 mknod cuaiA$name c $major $(($minor + 128 + 65536)) \
1258 mknod cualA$name c $major $(($minor + 128 + 131072)) \
1265 # Alpha AS8[24]00 (TurboLaser) console.
1267 unit=`expr $i : 'zs.*\(.\)$'`
1269 mknod zs$unit c 135 $m
1272 # Digiboard PC/?? 16 port card.
1273 # The current scheme of minor numbering is:
1275 # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
1277 # CARD bitfield in future versions may be extended to 3 bits.
1282 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1284 card=`expr $i : 'tty.*\(.\)$'`
1285 for unit in $portlist
1287 minor=`ttyminor $unit`
1288 minor=$(($card * 65536 + $minor))
1290 mknod ttyD$name c $major $minor
1291 mknod ttyiD$name c $major $(($minor + 32))
1292 mknod ttylD$name c $major $(($minor + 64))
1298 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1300 card=`expr $i : 'cua.*\(.\)$'`
1301 for unit in $portlist
1303 minor=`ttyminor $unit`
1304 minor=$(($card * 65536 + $minor))
1306 mknod cuaD$name c $major $(($minor + 128)) uucp:dialer
1307 mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer
1308 mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer
1313 # Stallion multi serial cards (stl and stli drivers)
1315 # These drivers reserve 64 minor devices per board, even if the board
1316 # supports only 4 devices. We default to creating only 8 of the 64 devices
1317 # to keep /dev from getting too large (which => slow). The last part of the
1318 # arg is the board number to create ports for. So:
1319 # ttyE0 will create 8 dialin ports ttyE0-ttyE7, plus ttyiE* and ttylE*
1320 # cuaE0 will create 8 dialout ports cuaE0-cuaE7, plus cuaiE* and cualE*
1321 # ttyE1 will create 8 dialin ports ttyE64-ttyE71, plus ttyiE* and ttylE*
1323 # If you have EasyConnect 8/32 or 8/64 cards, you will need to change the
1324 # definition of "maxport" below to get nodes for the full 32 or 64
1327 # Note that the mapping of minor device numbers (with the hole between
1328 # 32-64k) is a bit odd to keep compatibility with ttyd? for
1329 # lock/initial devices.
1330 # Minor device field for the ports is
1331 # card{3} unused{4} unit-msb{1} unused{8} callout{1} lock{1} init{1} unit-lsbs{5}
1332 # for the mem device is
1334 # (For stl, there is only 1 mem device per system; for stli, one per board)
1337 stallion 72 E `expr $i : 'tty.*\(.\)$'` 0
1340 stallion 72 E `expr $i : 'cua.*\(.\)$'` 1
1343 card=`expr $i : 'stl\(.\)$'`
1344 stallion 72 E $card 0
1345 stallion 72 E $card 1
1349 stallion 75 F `expr $i : 'tty.*\(.\)$'` 0
1352 stallion 75 F `expr $i : 'cua.*\(.\)$'` 1
1355 card=`expr $i : 'stl\(.\)$'`
1356 stallion 75 F $card 0
1357 stallion 75 F $card 1
1361 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1362 modulelist="a b c d"
1364 card=`expr $i : 'tty.*\(.\)$'`
1365 for unit in $modulelist
1367 moduleminor=`ttyminor $unit`
1368 moduleminor=$(($moduleminor % 10 * 16))
1371 for unit in $portlist
1373 minor=`ttyminor $unit`
1374 minor=$(($card * 65536 + $minor + $moduleminor))
1375 name=$card$modulename$unit
1377 mknod ttyM$name c $major $minor
1378 mknod ttyiM$name c $major $(($minor + 64))
1379 mknod ttylM$name c $major $(($minor + 128))
1386 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1387 modulelist="a b c d"
1389 card=`expr $i : 'cua.*\(.\)$'`
1390 for unit in $modulelist
1392 moduleminor=`ttyminor $unit`
1393 moduleminor=$(($moduleminor % 10 * 16))
1396 for unit in $portlist
1398 minor=`ttyminor $unit`
1399 minor=$(($card * 65536 + $minor + $moduleminor))
1400 name=$card$modulename$unit
1402 mknod cuaM$name c $major $(($minor + 262144)) \
1404 mknod cuaiM$name c $major $(($minor + 64 + 262144)) \
1406 mknod cualM$name c $major $(($minor + 128 + 262144)) \
1416 MINOR=$(($BOARD * 65536))
1418 dmesg | while read first rest; do
1426 rm -f ttyR* ttyiR* ttylR*
1427 for i in $controllers; do
1429 dmesg | while read first bar ports rest; do
1437 echo -n "Creating $ndevices devices for $i: "
1439 while [ $dev -lt $ndevices ]; do
1440 mknod ttyR$Rnum c $major $MINOR
1441 mknod ttyiR$Rnum c $major $(($MINOR + 32))
1442 mknod ttylR$Rnum c $major $(($MINOR + 64))
1444 MINOR=$(($MINOR + 1))
1447 BOARD=$(($BOARD + 1))
1448 MINOR=$(($BOARD * 65536))
1456 MINOR=$(($BOARD * 65536))
1458 dmesg | while read first rest; do
1466 rm -f cuaR* cuaiR* cualR*
1467 for i in $controllers; do
1469 dmesg | while read first bar ports rest; do
1477 echo -n "Creating $ndevices devices for $i: "
1479 while [ $dev -lt $ndevices ]; do
1480 mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
1481 mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
1483 mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \
1486 MINOR=$(($MINOR + 1))
1489 BOARD=$(($BOARD + 1))
1490 MINOR=$(($BOARD * 65536))
1496 unit=`expr $i : 'mse\(.*\)'`
1498 # non-blocking for X11
1499 mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))`
1503 unit=`expr $i : 'psm\(.*\)'`
1505 # non-blocking for X11
1506 mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))`
1510 name=`expr $i : 'mouse\(.*\)'`
1511 if [ ! -c $name ]; then
1512 $0 $name # make the appropriate device
1518 mknod pcaudio c 24 0
1519 mknod pcaudioctl c 24 128
1523 mknod socksys c 41 0
1526 chmod 666 socksys nfsd spx
1531 # changes from Linux voxware
1532 # minor Linux FreeBSD
1533 # 8 sequencer2 (aka music0) music0
1534 # 17 patmgr0 sequencer1
1535 # 33 patmgr1 sequencer2
1538 unit=`expr $i : 'snd\(.*\)'`
1541 # XXX write this less verbosely, like std
1542 snd_security_hole=0 # XXX
1543 umask $snd_security_hole
1545 ln -fs mixer$unit mixer
1546 ln -fs sequencer$unit sequencer
1548 ln -fs audio$unit audio
1549 ln -fs dspW$unit dspW
1550 ln -fs music$unit music
1552 ln -fs dsp$unit.0 dsp$unit
1553 ln -fs audio$unit.0 audio$unit
1554 ln -fs dspW$unit.0 dspW$unit
1556 mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))`
1557 mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))`
1558 mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))`
1562 minor=$(($chn * 65536 + $unit * 16))
1563 mknod dsp$unit.$chn c $chr $(($minor + 3))
1564 mknod audio$unit.$chn c $chr $(($minor + 4))
1565 mknod dspW$unit.$chn c $chr $(($minor + 5))
1568 mknod sndstat c $chr 6
1569 # minor number 7 is unused
1570 mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))`
1571 mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))`
1572 # minor numbers 10-15 are unused
1577 mknod vatio c 25 128
1582 unit=`expr $i : 'gsc\(.*\)'`
1583 mknod gsc${unit} c 47 `unit2minor $unit`
1584 mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))`
1585 mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))`
1586 mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))`
1587 chmod 666 gsc${unit}*
1591 mknod acpi c 152 0 root:operator
1595 mknod apm c 39 0 root:operator
1600 mknod apmctl c 39 8 root:operator
1605 unit=`expr $i : 'card\(.*\)'`
1607 mknod card$unit c $chr `unit2minor $unit`
1613 *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
1614 *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
1615 *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
1616 *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
1619 ttyy?) unit=$(($unit + 16));;
1620 ttyz?) unit=$(($unit + 32));;
1626 mknod cronyx c 42 63
1630 mknod joy0 c 51 0 root:operator
1631 mknod joy1 c 51 1 root:operator
1641 unit=`expr $i : 'ctx\(.*\)'`
1642 mknod ctx$unit c 40 `unit2minor $unit`
1647 unit=`expr $i : 'meteor\(.*\)'`
1648 mknod meteor$unit c 67 `unit2minor $unit`
1649 chmod 444 meteor$unit
1653 unit=`expr $i : 'bktr\(.*\)'`
1654 mknod bktr$unit c 92 `unit2minor $unit`
1655 mknod tuner$unit c 92 `unit2minor $((16 + $unit))`
1656 mknod vbi$unit c 92 `unit2minor $((32 + $unit))`
1657 chmod 444 bktr$unit tuner$unit vbi$unit
1661 ntun=`expr $i : 'tun\(.*\)$'`
1663 while [ $unit -le $ntun ]; do
1664 mknod tun$unit c 52 `unit2minor $unit`
1670 ntap=`expr $i : 'tap\(.*\)$'`
1672 while [ $unit -le $ntap ]; do
1673 mknod tap$unit c 149 `unit2minor $unit` root:network
1679 mknod sysmouse c 12 128
1680 mknod consolectl c 12 255
1684 mknod jogdial c 160 0
1688 unit=`expr $i : 'snp\(.*\)'`
1689 mknod snp$unit c 53 `unit2minor $unit`
1692 # dufault@hda.com: If I do much more work on other A-D boards
1693 # then eventually we'll have a "ad" and "dio" interface and some of these
1694 # "labpcaio" ones will be gone.
1695 # labpcaio: D-A and A-D.
1696 # labpcdio: Digital in and Digital out.
1703 unit=`expr $i : 'labpcaio\(.*\)'`
1704 all="0 1 2 3 4 5 6 7"
1709 unit=`expr $i : 'labpcdio\(.*\)'`
1714 die 3 "Don't know LabPC type $i"
1717 if [ -z "${unit}" ]; then
1722 mknod $name$unit c 66 $(($offset + $unit))
1727 mknod $name$i c 66 $(($offset + $i))
1731 echo "No such LabPC unit: $unit"
1738 mknod perfmon c 2 32 root:kmem
1745 mknod ipstate c 79 2
1750 mknod elan-mmcr c 100 0 # XXX local major
1755 unit=`expr $i : 'kbd\(.*\)'`
1757 mknod kbd$unit c $chr `unit2minor $unit`
1769 unit=`expr $i : 'i4brbch\(.*\)'`
1770 mknod i4brbch$unit c 57 `unit2minor $unit`
1775 unit=`expr $i : 'i4bteld\(.*\)'`
1776 mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))`
1780 unit=`expr $i : 'i4btel\(.*\)'`
1781 mknod i4btel$unit c 56 `unit2minor $unit`
1785 unit=`expr $i : 'i4btrc\(.*\)'`
1786 mknod i4btrc$unit c 59 `unit2minor $unit`
1790 unit=`expr $i : 'aac\(.*\)'`
1791 mknod aac$unit c 150 `unit2minor $unit`
1792 ln -fs aac$unit afa$unit
1793 ln -fs aac$unit hpn$unit
1797 unit=`expr $i : 'mlx\(.*\)'`
1798 mknod mlx$unit c 130 `unit2minor $unit`
1802 unit=`expr $i : 'amr\(.*\)'`
1803 mknod amr$unit c 132 `unit2minor $unit`
1807 unit=`expr $i : 'ips\(.*\)'`
1808 mknod mlx$unit c 175 `unit2minor $unit`
1812 unit=`expr $i : 'ciss\(.*\)'`
1813 mknod ciss$unit c 166 `unit2minor $unit`
1817 mknod agpgart c 148 0
1821 unit=`expr $i : 'twe\(.*\)'`
1822 mknod twe$unit c 146 `unit2minor $unit`
1826 unit=`expr $i : 'tw\(.*\)'`
1827 mknod tw$unit c 19 `unit2minor $unit` root:operator
1831 unit=`expr $i : 'cfs\(.*\)'`
1832 mknod cfs$unit c 93 $unit root:operator
1836 unit=`expr $i : 'nsmb\(.*\)'`
1837 mknod nsmb$unit c 144 $unit
1841 umask 0 # XXX should be elsewhere
1847 echo $i - no such device name