Install ppbus headers.
[dragonfly.git] / include / Makefile
1 #       @(#)Makefile    8.2 (Berkeley) 1/4/94
2 # $FreeBSD: src/include/Makefile,v 1.109.2.27 2003/01/24 05:12:29 sam Exp $
3 # $DragonFly: src/include/Makefile,v 1.42 2008/11/24 13:35:57 hasso Exp $
4 #
5 # Doing a make install builds /usr/include
6 #
7 # The ``rm -rf''s used below are safe because rm doesn't follow symbolic
8 # links.
9
10 CLEANFILES= osreldate.h version vers.c
11 SUBDIR= arpa protocols rpc rpcsvc
12 INCS=   a.out.h ar.h assert.h bitstring.h complex.h cpio.h ctype.h db.h \
13         dirent.h disktab.h \
14         dlfcn.h elf.h elf-hints.h err.h fmtmsg.h fnmatch.h fstab.h \
15         fts.h ftw.h getopt.h glob.h grp.h histedit.h \
16         iconv.h ieeefp.h ifaddrs.h iso646.h inttypes.h \
17         langinfo.h libgen.h limits.h link.h locale.h malloc.h math.h memory.h \
18         mpool.h monetary.h ndbm.h netconfig.h \
19         netdb.h nl_types.h nlist.h nss.h nsswitch.h objformat.h \
20         paths.h pthread.h pthread_np.h pwd.h \
21         ranlib.h readpassphrase.h regex.h regexp.h \
22         res_update.h resolv.h re_comp.h rmd160.h \
23         search.h setjmp.h sgtty.h \
24         signal.h stab.h stdarg.h stdbool.h stddef.h stdint.h stdio.h stdlib.h \
25         string.h stringlist.h strings.h struct.h sysexits.h tar.h time.h \
26         timers.h ttyent.h unistd.h ulimit.h utime.h utmp.h uuid.h vis.h \
27         wchar.h wctype.h wordexp.h
28
29 .if defined(WANT_HESIOD)
30 INCS+=  hesiod.h
31 .endif
32
33 MHDRS=  float.h floatingpoint.h varargs.h
34
35 # Only for default SHARED=copies case
36 SHDRS=  soundcard.h joystick.h
37
38 LHDRS=  aio.h errno.h fcntl.h linker_set.h mqueue.h poll.h sched.h \
39         semaphore.h syslog.h termios.h ucontext.h
40
41 # directories which also contain header files that need to be copied.
42 # Other directories, like 'bus' and 'netproto', are created using mtree.
43 #
44 # XXX allow these directories to not contain header files.
45 LDIRS=  net netbt netgraph netinet netinet6 sys vm
46
47 # Subdirectories containing header files to copy.  In symlink mode 
48 # the subdirectory will be symlinked.  Care must be taken to adjust
49 # LSYMSUBDIRS below to remove subdirectories whos parent directories.
50 # If you make a mistake, part of your source tree might get overwritten
51 # when buildworld is run.
52 #
53 LSUBDIRS=       bus/cam bus/cam/scsi \
54         emulation/linux \
55         vfs/msdosfs vfs/nfs vfs/ntfs vfs/nwfs \
56         vfs/smbfs vfs/udf vfs/ufs vfs/hammer \
57         net/vlan net/ipfw net/ip6fw net/dummynet net/sppp net/ip_mroute \
58         net/bridge net/tap net/tun net/ppp net/ppp_layer net/sl \
59         net/pf net/altq \
60         netgraph/UI netgraph/async netgraph/bpf netgraph/bridge \
61         netgraph/cisco netgraph/echo netgraph/eiface netgraph/etf \
62         netgraph/ether netgraph/fec netgraph/frame_relay netgraph/hole \
63         netgraph/iface netgraph/ksocket netgraph/l2tp netgraph/lmi \
64         netgraph/mppc netgraph/one2many netgraph/ppp \
65         netgraph/pppoe netgraph/pptpgre netgraph/rfc1490 netgraph/socket \
66         netgraph/tee netgraph/tty netgraph/vjc \
67         bus/cam bus/usb bus/pccard bus/pci bus/isa bus/ppbus \
68         netproto/atalk netproto/atm netproto/ipsec netproto/ipx \
69         netproto/key netproto/natm netproto/ncp netproto/ns netproto/smb \
70         netproto/atm/ipatm netproto/atm/sigpvc netproto/atm/spans \
71         netproto/atm/uni netproto/802_11 netproto/mpls
72
73 LSUBDIRS3= vfs/isofs/cd9660 net/i4b/include \
74         dev/misc/lpt dev/misc/ppi dev/netif/wi dev/video/bktr dev/video/meteor
75
76 # For SHARED=symlinks, bus/cam and netproto/atm are symlinks, so cam/scsi
77 # and netproto/atm/* are taken care of
78 LSYMSUBDIRS=    ${LSUBDIRS:Nbus/cam/scsi:Nnetproto/atm/*:Nnet/*:Nnetgraph/*}
79 LSYMSUBDIRS3=   ${LSUBDIRS3:Nnet/*}
80
81 # For obsolete headers which need to be removed
82 RMHEADERS=      machine/ansi.h sys/inttypes.h
83
84 # Define SHARED to indicate whether you want symbolic links to the system
85 # source (``symlinks''), or a separate copy (``copies'').  ``symlinks'' is
86 # probably only useful for developers and should be avoided if you do not
87 # wish to tie your /usr/include and /usr/src together.
88 #SHARED=        symlinks
89 SHARED?=        copies
90
91 INCS+=  osreldate.h
92
93 osreldate.h:    ${.CURDIR}/../sys/conf/newvers.sh \
94                 ${.CURDIR}/../sys/sys/param.h
95         @${ECHO} creating osreldate.h from newvers.sh
96         setvar PARAMFILE ${.CURDIR}/../sys/sys/param.h; \
97         . ${.CURDIR}/../sys/conf/newvers.sh;                    \
98         echo "$$COPYRIGHT" > osreldate.h;                       \
99         echo "#ifdef _KERNEL" >> osreldate.h;                   \
100         echo '#error "osreldate.h must not be used in the kernel, use sys/param.h"' >> osreldate.h; \
101         echo "#else" >> osreldate.h;                            \
102         echo "#undef __DragonFly_version" >> osreldate.h;       \
103         echo "#define __DragonFly_version $$RELDATE" >> osreldate.h; \
104         echo "#ifdef __FreeBSD__" >> osreldate.h;               \
105         echo "#undef __FreeBSD_version" >> osreldate.h; \
106         echo "#define __FreeBSD_version 480101" >> osreldate.h; \
107         echo "#endif" >> osreldate.h;                           \
108         echo "#endif" >> osreldate.h
109
110 .for i in ${LHDRS}
111 INCSLINKS+=     sys/$i ${INCLUDEDIR}/$i
112 .endfor
113 .for i in ${MHDRS}
114 INCSLINKS+=     machine/$i ${INCLUDEDIR}/$i
115 .endfor
116 INCSLINKS+=     bus/cam ${INCLUDEDIR}/cam
117 INCSLINKS+=     vfs/msdosfs ${INCLUDEDIR}/msdosfs
118 INCSLINKS+=     vfs/isofs ${INCLUDEDIR}/isofs
119 INCSLINKS+=     vfs/mfs ${INCLUDEDIR}/mfs
120 INCSLINKS+=     vfs/nfs ${INCLUDEDIR}/nfs
121 INCSLINKS+=     vfs/ntfs ${INCLUDEDIR}/ntfs
122 INCSLINKS+=     vfs/nwfs ${INCLUDEDIR}/nwfs
123 INCSLINKS+=     vfs ${INCLUDEDIR}/fs
124 # this is for <ufs/ufs/...> and <ufs/ffs/...> paths used by ports
125 # It is hopefully a temporary hack until we have environments working.
126 INCSLINKS+=     vfs ${INCLUDEDIR}/ufs
127 INCSLINKS+=     ufs ${INCLUDEDIR}/vfs/ffs
128 INCSLINKS+=     emulation ${INCLUDEDIR}/compat
129 INCSLINKS+=     netproto/atalk ${INCLUDEDIR}/netatalk
130 INCSLINKS+=     netproto/atm ${INCLUDEDIR}/netatm
131 INCSLINKS+=     netproto/ipsec ${INCLUDEDIR}/netipsec
132 INCSLINKS+=     netproto/ipx ${INCLUDEDIR}/netipx
133 INCSLINKS+=     netproto/key ${INCLUDEDIR}/netkey
134 INCSLINKS+=     netproto/natm ${INCLUDEDIR}/netnatm
135 INCSLINKS+=     netproto/ncp ${INCLUDEDIR}/netncp
136 INCSLINKS+=     netproto/ns ${INCLUDEDIR}/netns
137 INCSLINKS+=     netproto/smb ${INCLUDEDIR}/netsmb
138 INCSLINKS+=     bus/pccard ${INCLUDEDIR}/pccard
139
140 # NOTE!
141 #
142 # machine/ header files come from the platform architecture and
143 # cpu/ header files come from the cpu architecture.  All code outside
144 # of the machine header files ALWAYS #include's <machine/blah.h>.  So
145 # if the platform architecture is missing a header file we have to 
146 # copy it in from the cpu architecture.  This way we do not have to
147 # create dozens of pure forwarding headers for files that platform
148 # architecture does not need to enhance.
149
150 mtree_setup:
151 .for i in ${LDIRS} ${LSYMSUBDIRS} ${LSYMSUBDIRS3} machine cpu crypto dev/acpica
152         if [ -h ${DESTDIR}/usr/include/$i ]; then \
153                 rm -f ${DESTDIR}/usr/include/$i; \
154         fi
155 .endfor
156         mtree -deU -f ${.CURDIR}/../etc/mtree/BSD.include.dist \
157                 -p ${DESTDIR}/usr/include
158
159 copies:         mtree_setup
160 .for i in ${LDIRS} ${LSUBDIRS} ${LSUBDIRS3}
161         cd ${.CURDIR}/../sys; \
162                 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 $i/*.h \
163                 ${DESTDIR}/usr/include/$i
164 .endfor
165         cd ${.CURDIR}/../sys; \
166                 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 opencrypto/*.h \
167                 ${DESTDIR}/usr/include/crypto
168         cd ${.CURDIR}/../sys/dev/acpica5; \
169                 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 acpiio.h \
170                 ${DESTDIR}/usr/include/dev/acpica
171 .if exists(${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include)
172         cd ${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include; \
173                 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \
174                 ${DESTDIR}/usr/include/cpu
175         # XXX this will cause quickworld to rebuild more junk
176         # then it needs to.
177         cpdup -o ${DESTDIR}/usr/include/cpu ${DESTDIR}/usr/include/machine
178 .endif
179 .if exists(${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include)
180         cd ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include; \
181                 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \
182                 ${DESTDIR}/usr/include/machine
183 .if exists(${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include/pc)
184         cd ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include/pc; \
185                 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \
186                 ${DESTDIR}/usr/include/machine/pc
187 .endif
188 .endif
189 .if exists(${.CURDIR}/../sys/net/i4b/include/${MACHINE_ARCH})
190         cd ${.CURDIR}/../sys/net/i4b/include/${MACHINE_ARCH}; \
191                 ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \
192                 ${DESTDIR}/usr/include/i4b_machine
193 .endif
194 .for i in ${SHDRS}
195         ${LN} -sf ../sys/$i ${DESTDIR}/usr/include/machine/$i
196 .endfor
197 .for i in ${RMHEADERS}
198         rm -f ${DESTDIR}/usr/include/$i
199 .endfor
200
201 symlinks:       mtree_setup
202         @${ECHO} "Setting up symlinks to kernel source tree..."
203 .for i in ${LDIRS}
204         rm -rf ${DESTDIR}/usr/include/$i
205         ${LN} -s ../../sys/$i ${DESTDIR}/usr/include/$i
206 .endfor
207         rm -rf ${DESTDIR}/usr/include/crypto
208         ${LN} -s ../../sys/opencrypto ${DESTDIR}/usr/include/crypto
209 .for i in ${LSYMSUBDIRS}
210         rm -rf ${DESTDIR}/usr/include/$i
211         ${LN} -s ../../../sys/$i ${DESTDIR}/usr/include/$i
212 .endfor
213 .for i in ${LSYMSUBDIRS3}
214         rm -rf ${DESTDIR}/usr/include/$i
215         ${LN} -s ../../../../sys/$i ${DESTDIR}/usr/include/$i
216 .endfor
217         rm -rf ${DESTDIR}/usr/include/cpu
218         ${LN} -s ../../sys/cpu/${MACHINE_ARCH}/include ${DESTDIR}/usr/include/cpu
219         rm -rf ${DESTDIR}/usr/include/machine
220         cpdup ${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include \
221                 ${DESTDIR}/usr/include/machine
222         cpdup -o ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include \
223                 ${DESTDIR}/usr/include/machine
224         rm -rf ${DESTDIR}/usr/include/i4b_machine
225         ${LN} -s ../../sys/net/i4b/include/${MACHINE_ARCH} ${DESTDIR}/usr/include/i4b_machine
226
227 .include <bsd.prog.mk>
228
229 installincludes: ${SHARED}