4 # This is rc.conf - a file full of useful variables that you can set
5 # to change the default startup behavior of your system. You should
6 # not edit this file! Put any overrides into one of the ${rc_conf_files}
7 # instead and you will be able to update these defaults later without
8 # spamming your local configuration information.
10 # The ${rc_conf_files} files should only contain values which override
11 # values set in this file. This eases the upgrade path when defaults
12 # are changed and new features are added.
14 # All arguments must be in double or single quotes.
16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
17 # $DragonFly: src/etc/defaults/rc.conf,v 1.20 2005/01/12 02:32:15 joerg Exp $
19 ##############################################################
20 ### Important initial Boot-time options ####################
21 ##############################################################
23 rc_debug="NO" # Set to YES to enable debugging output from rc.d
24 rc_info="YES" # Enables display of informational messages at boot.
25 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
26 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
27 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
28 apmd_enable="NO" # Run apmd to handle APM event from userland.
29 apmd_flags="" # Flags to apmd (if enabled).
30 devd_enable="NO" # Run devd, to trigger programs on device tree changes.
31 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
32 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
33 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
34 pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
35 pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
36 pccard_beep="2" # pccard beep type.
37 pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
38 pccardd_flags="-z" # Additional flags for pccardd.
39 pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file
40 pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
41 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
42 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
43 script_name_sep=" " # Change if your startup scripts' names contain spaces
44 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
45 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
46 netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
47 extra_netfs_types="NO" # List of network extra filesystem types for delayed
48 # mount at startup (or NO).
50 ##############################################################
51 ### Network configuration sub-section ######################
52 ##############################################################
54 ### Basic network and firewall/security options: ###
56 # see 'man firewall' for an explanation of the default firewall rules
58 hostname="" # Set this!
59 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
60 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
61 dhclient_flags="" # Additional flags to pass to dhcp client.
62 dhcpd_enable="NO" # Set to YES to enable the DHCP server
63 dhcrelay_enable="NO" # Set to YES to enable the DHCP relay server
64 firewall_enable="NO" # Set to YES to enable firewall functionality
65 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
66 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
67 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
68 firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
69 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
70 firewall_open_tcp_ports="22 25 53 80 113 443"
71 firewall_open_udp_ports="53"
72 firewall_quiet="NO" # Set to YES to suppress rule display
73 firewall_logging="NO" # Set to YES to enable events logging
74 firewall_flags="" # Flags passed to ipfw when type is a file
75 ip_portrange_first="NO" # Set first dynamically allocated port
76 ip_portrange_last="NO" # Set last dynamically allocated port
77 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
78 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
79 natd_program="/sbin/natd" # path to natd, if you want a different one.
80 natd_enable="NO" # Enable natd (if firewall_enable == YES).
81 natd_interface="" # Public interface or IPaddress to use.
82 natd_flags="" # Additional flags for natd.
83 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
84 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
85 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
86 # /usr/src/contrib/ipfilter/rules for examples
87 ipfilter_flags="" # additional flags for ipfilter
88 ipnat_enable="NO" # Set to YES to enable ipnat functionality
89 ipnat_program="/sbin/ipnat" # where the ipnat program lives
90 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
91 ipnat_flags="" # additional flags for ipnat
92 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
93 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
94 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
95 ipfs_enable="NO" # Set to YES to enable saving and restoring
96 # of state tables at shutdown and boot
97 ipfs_program="/sbin/ipfs" # where the ipfs program lives
98 ipfs_flags="" # additional flags for ipfs
99 pf_enable="NO" # Set to YES to enable packet filter (pf)
100 pf_rules="/etc/pf.conf" # rules definition file for pf
101 pf_program="/usr/sbin/pfctl" # where the pfctl program lives
102 pf_flags="" # additional flags for pfctl
103 pflog_enable="NO" # Set to YES to enable packet filter logging
104 pflog_logfile="/var/log/pflog" # where pflogd shoule store the logfile
105 pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
106 pflog_flags="" # additional flags for pflogd
107 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
108 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
109 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
110 # For the following option you need to have TCP_DROP_SYNFIN set in your
111 # kernel. Please refer to LINT and NOTES for details.
112 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
113 # NOTE: this violates the TCP specification
114 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
115 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
116 network_interfaces="auto" # List of network interfaces (or "auto").
117 cloned_interfaces="" # List of cloned network interfaces to create.
118 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
119 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
120 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
121 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
123 # If you have any sppp(4) interfaces above, you might also want to set
124 # the following parameters. Refer to spppcontrol(8) for their meaning.
125 sppp_interfaces="" # List of sppp interfaces.
126 #sppp_interfaces="isp0" # example: sppp over ISDN
127 #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
128 gif_interfaces="NO" # List of GIF tunnels (or "NO").
129 #gif_interfaces="gif0 gif1" # Examples typically for a router.
130 # Choose correct tunnel addrs.
131 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
132 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
134 # User ppp configuration.
135 ppp_enable="NO" # Start user-ppp (or NO).
136 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
137 # For details see man page for ppp(8). Default is auto.
138 ppp_nat="YES" # Use PPP's internal network address translation or NO.
139 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
140 ppp_user="root" # Which user to run ppp as
142 ### Network daemon (miscellaneous) ###
143 syslogd_enable="YES" # Run syslog daemon (or NO).
144 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
145 #syslogd_flags="-s" # Flags to syslogd (if enabled).
146 syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
147 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
148 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
149 inetd_flags="-wW" # Optional flags to inetd
151 # named. It may be possible to run named in a sandbox, man security for
152 # details. Note: when named_chrootdir is specified, RCNG automatically
155 named_enable="NO" # Run named, the DNS server (or NO).
156 named_program="/usr/sbin/named" # path to named, if you want a different one.
157 named_pidfile="/var/run/named.pid" # Pid file
158 named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it)
161 # kerberos. Do not run the admin daemons on slave servers
163 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
164 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
165 kadmind5_server_enable="NO" # Run kadmind (or NO)
166 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
167 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
168 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
170 rwhod_enable="NO" # Run the rwho daemon (or NO).
171 rwhod_flags="" # Flags for rwhod
172 rarpd_enable="NO" # Run rarpd (or NO).
173 rarpd_flags="" # Flags to rarpd.
174 bootparamd_enable="NO" # Run bootparamd (or NO).
175 bootparamd_flags="" # Flags to bootparamd
176 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
177 pppoed_provider="*" # Provider and ppp(8) config file entry.
178 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
179 pppoed_interface="fxp0" # The interface that pppoed runs on.
180 sshd_enable="NO" # Enable sshd
181 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
182 sshd_flags="" # Additional flags for sshd.
184 ### Network File System (NFS): ###
185 ### Server-side options also need rpcbind_enable="YES" ###
186 amd_enable="NO" # Run amd service with $amd_flags (or NO).
187 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
188 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
189 nfs_client_enable="NO" # This host is an NFS client (or NO).
190 nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
191 nfs_access_cache="2" # Client cache timeout in seconds
192 nfs_server_enable="NO" # This host is an NFS server (or NO).
193 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
194 mountd_enable="NO" # Run mountd (or NO).
195 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
196 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
197 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
198 nfs_bufpackets="" # bufspace (in packets) for client
199 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
200 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
201 rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
202 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
203 # this is rpcbind in 5.x
204 rpcbind_program="/usr/sbin/portmap" # path to rpcbind, if you want a different one.
205 rpcbind_flags="" # Flags to rpcbind (if enabled).
206 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
207 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
208 keyserv_flags="" # Flags to keyserv (if enabled).
210 ### Network Time Services options: ###
211 timed_enable="NO" # Run the time daemon (or NO).
212 timed_flags="" # Flags to timed (if enabled).
213 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
214 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
215 ntpd_flags="-s" # Flags to ntpd (if enabled).
217 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
218 nis_client_enable="NO" # We're an NIS client (or NO).
219 nis_client_flags="" # Flags to ypbind (if enabled).
220 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
221 nis_ypset_flags="" # Flags to ypset (if enabled).
222 nis_server_enable="NO" # We're an NIS server (or NO).
223 nis_server_flags="" # Flags to ypserv (if enabled).
224 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
225 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
226 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
227 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
229 ### Network routing options: ###
230 defaultrouter="NO" # Set to default gateway (or NO).
231 static_routes="" # Set to static route list (or leave empty).
232 gateway_enable="NO" # Set to YES if this host will be a gateway.
233 router_enable="NO" # Set to YES to enable a routing daemon.
234 router="/sbin/routed" # Name of routing daemon to use if enabled.
235 router_flags="-q" # Flags for routing daemon.
236 mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
237 mrouted_flags="" # Flags for multicast routing daemon.
238 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
239 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
240 ipxrouted_flags="" # Flags for IPX routing daemon.
241 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
242 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
243 accept_sourceroute="NO" # accept source routed packets to us
245 ### ATM interface options: ###
246 atm_enable="NO" # Configure ATM interfaces (or NO).
247 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
248 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
249 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
250 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
251 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
252 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
253 atm_pvcs="" # Set to PVC list (or leave empty).
254 atm_arps="" # Set to permanent ARP list (or leave empty).
256 ### ISDN interface options: (see also: /usr/share/examples/isdn) ###
257 isdn_enable="NO" # Enable the ISDN subsystem (or NO).
258 isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
259 isdn_flags="-dn -d0x1f9" # Flags for isdnd
260 isdn_ttype="cons25" # terminal type for fullscreen mode
261 isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
262 isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
263 isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
265 ### Miscellaneous network options: ###
266 icmp_bmcastecho="NO" # respond to broadcast ping packets
268 ### IPv6 options: ###
269 ipv6_enable="NO" # Set to YES to set up for IPv6.
270 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
271 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
272 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
273 ipv6_static_routes="" # Set to static route list (or leave empty).
274 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
275 # route toward loopback interface.
276 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
277 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
278 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
279 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
280 ipv6_router_flags="" # Flags to IPv6 routing daemon.
281 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
283 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
284 # node, you should stop advertisement.
285 #ipv6_network_interfaces="ed0 ep0" # Examples for router
286 # or static configuration for end node.
287 # Choose correct prefix value.
288 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
289 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
290 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
291 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
292 ipv6_default_interface="NO" # Default output interface for scoped addrs.
293 # Now this works only for IPv6 link local
295 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
296 # advertisement daemon. If set to YES,
297 # this router becomes a possible candidate
298 # IPv6 default router for local subnets.
299 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
300 mroute6d_enable="NO" # Do IPv6 multicast routing.
301 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
302 # routing daemon. You need to
303 # install it from package or
305 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
306 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
307 # tunneling interface. Specify this entry
308 # to enable 6to4 interface.
309 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
310 # to limit peer addr range. Effective value
312 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
313 # If you like, you can set "AUTO" for this.
314 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
315 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
316 # IPv6-to-IPv4 TCP translator. You also need
318 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
319 # communication. (like ::ffff:a.b.c.d)
320 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
322 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
323 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
324 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
325 ipv6_firewall_logging="NO" # Set to YES to enable events logging
326 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
327 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
328 # see /usr/src/contrib/ipfilter/rules
331 ##############################################################
332 ### System console options #################################
333 ##############################################################
335 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
336 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
337 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
338 keychange="NO" # function keys default values (or NO).
339 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
340 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
341 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
342 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
343 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
344 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
345 saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
346 moused_enable="NO" # Run the mouse daemon.
347 moused_type="auto" # See man page for rc.conf(5) for available settings.
348 moused_port="/dev/psm0" # Set to your mouse port.
349 moused_flags="" # Any additional flags to moused.
350 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
351 # language code table, specify alternative range
352 # start like mousechar_start=3, see vidcontrol(1)
353 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
354 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
357 ##############################################################
358 ### pcvt console driver options ############################
359 ##############################################################
361 pcvt_verbose="NO" # set to YES to enable verbose configuration messages
362 pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO).
363 pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO).
364 pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO).
365 pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO).
366 pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO).
367 pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO).
368 pcvt_lines="NO" # lines (25, 28, 40, 50 or NO).
369 pcvt_blanktime="NO" # blank time (in seconds) (or NO).
370 pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO).
371 pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO).
372 pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO).
375 ##############################################################
376 ### Mail Transfer Agent (MTA) options ######################
377 ##############################################################
379 mta_start_script="/etc/rc.sendmail"
380 # Script to start your chosen MTA, called by /etc/rc.
381 # Settings for /etc/rc.sendmail:
382 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
383 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
384 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
385 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
386 # Flags for localhost-only MTA
387 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
388 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
389 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
390 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
391 # Flags for sendmail_msp_queue daemon.
394 ##############################################################
395 ### Miscellaneous administrative options ###################
396 ##############################################################
398 mixer_enable="NO" # Manage mixer settings across reboots
399 cron_enable="YES" # Run the periodic job daemon.
400 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
401 cron_flags="" # Which options to pass to the cron daemon.
402 lpd_enable="NO" # Run the line printer daemon.
403 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
404 lpd_flags="" # Flags to lpd (if enabled).
405 usbd_enable="NO" # Run the usbd daemon.
406 usbd_flags="" # Flags to usbd (if enabled).
407 dumpdev="NO" # Device name to crashdump to (or NO).
408 dumpdir="/var/crash" # Directory where crash dumps are to be stored
409 savecore_flags="" # Used if dumpdev is enabled above, and present.
410 enable_quotas="NO" # turn on quotas on startup (or NO).
411 check_quotas="YES" # Check quotas on startup (or NO).
412 accounting_enable="NO" # Turn on process accounting (or NO).
413 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
414 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
415 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
416 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
417 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
418 osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO).
419 clear_tmp_enable="NO" # Clear /tmp at startup.
420 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
421 ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
422 # shared library search paths
423 ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
424 # a.out shared library search paths
425 kern_securelevel_enable="NO" # kernel security level (see init(8)),
426 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
427 lomac_enable="NO" # start lomac(4) security module at boot
428 update_motd="YES" # update version info in /etc/motd (or NO)
429 start_vinum="NO" # set to YES to start vinum
430 unaligned_print="YES" # print unaligned access warnings on the alpha (or NO).
431 rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
432 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
433 jail_enable="NO" # Set to NO to disable starting of any jails
434 jail_list="" # Space separated list of names of jails
435 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
436 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
437 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
438 resident_enable="NO" # Proccess /etc/resident.conf
439 varsym_enable="NO" # Proccess /etc/varsym.conf
440 watchdogd_enable="NO" # Start the software watchdog daemon
442 ##############################################################
443 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
444 ### scripts to source rc_conf_files overrides safely. ##
445 ##############################################################
447 if [ -z "${source_rc_confs_defined}" ]; then
448 source_rc_confs_defined=yes
450 local i sourced_files
451 for i in ${rc_conf_files}; do
452 case ${sourced_files} in
456 sourced_files="${sourced_files}:$i:"
projects / dragonfly.git / blob