Fix warning.
[dragonfly.git] / sys / netinet6 / udp6_output.c
1 /*      $FreeBSD: src/sys/netinet6/udp6_output.c,v 1.1.2.6 2003/01/23 21:06:47 sam Exp $        */
2 /*      $DragonFly: src/sys/netinet6/udp6_output.c,v 1.7 2006/10/24 06:18:42 hsu Exp $  */
3 /*      $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $    */
4
5 /*
6  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  * 3. Neither the name of the project nor the names of its contributors
18  *    may be used to endorse or promote products derived from this software
19  *    without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  */
33
34 /*
35  * Copyright (c) 1982, 1986, 1989, 1993
36  *      The Regents of the University of California.  All rights reserved.
37  *
38  * Redistribution and use in source and binary forms, with or without
39  * modification, are permitted provided that the following conditions
40  * are met:
41  * 1. Redistributions of source code must retain the above copyright
42  *    notice, this list of conditions and the following disclaimer.
43  * 2. Redistributions in binary form must reproduce the above copyright
44  *    notice, this list of conditions and the following disclaimer in the
45  *    documentation and/or other materials provided with the distribution.
46  * 3. All advertising materials mentioning features or use of this software
47  *    must display the following acknowledgement:
48  *      This product includes software developed by the University of
49  *      California, Berkeley and its contributors.
50  * 4. Neither the name of the University nor the names of its contributors
51  *    may be used to endorse or promote products derived from this software
52  *    without specific prior written permission.
53  *
54  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
55  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
56  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
57  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
58  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
59  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
60  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
61  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
62  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
63  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
64  * SUCH DAMAGE.
65  *
66  *      @(#)udp_var.h   8.1 (Berkeley) 6/10/93
67  */
68
69 #include "opt_ipsec.h"
70 #include "opt_inet.h"
71 #include "opt_inet6.h"
72
73 #include <sys/param.h>
74 #include <sys/malloc.h>
75 #include <sys/mbuf.h>
76 #include <sys/protosw.h>
77 #include <sys/socket.h>
78 #include <sys/socketvar.h>
79 #include <sys/sysctl.h>
80 #include <sys/errno.h>
81 #include <sys/stat.h>
82 #include <sys/systm.h>
83 #include <sys/proc.h>
84 #include <sys/syslog.h>
85
86 #include <net/if.h>
87 #include <net/route.h>
88 #include <net/if_types.h>
89
90 #include <netinet/in.h>
91 #include <netinet/in_var.h>
92 #include <netinet/in_systm.h>
93 #include <netinet/ip.h>
94 #include <netinet/ip_var.h>
95 #include <netinet/in_pcb.h>
96 #include <netinet/udp.h>
97 #include <netinet/udp_var.h>
98 #include <netinet/ip6.h>
99 #include <netinet6/ip6_var.h>
100 #include <netinet6/in6_pcb.h>
101 #include <netinet6/udp6_var.h>
102 #include <netinet/icmp6.h>
103 #include <netinet6/ip6protosw.h>
104
105 #ifdef IPSEC
106 #include <netinet6/ipsec.h>
107 #ifdef INET6
108 #include <netinet6/ipsec6.h>
109 #endif
110 #endif /* IPSEC */
111
112 #include <net/net_osdep.h>
113
114 /*
115  * UDP protocol inplementation.
116  * Per RFC 768, August, 1980.
117  */
118
119 #define in6pcb          inpcb
120 #define udp6stat        udpstat
121 #define udp6s_opackets  udps_opackets
122
123 int
124 udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
125             struct mbuf *control, struct thread *td)
126 {
127         u_int32_t ulen = m->m_pkthdr.len;
128         u_int32_t plen = sizeof(struct udphdr) + ulen;
129         struct ip6_hdr *ip6;
130         struct udphdr *udp6;
131         struct in6_addr *laddr, *faddr;
132         u_short fport;
133         int error = 0;
134         struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
135         int priv;
136         int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
137         int flags;
138         struct sockaddr_in6 tmp;
139
140         priv = !suser(td);      /* 1 if privilaged, 0 if not */
141         if (control) {
142                 if ((error = ip6_setpktoptions(control, &opt, priv, 0)) != 0)
143                         goto release;
144                 in6p->in6p_outputopts = &opt;
145         }
146
147         if (addr6) {
148                 /*
149                  * IPv4 version of udp_output calls in_pcbconnect in this case,
150                  * which needs splnet and affects performance.
151                  * Since we saw no essential reason for calling in_pcbconnect,
152                  * we get rid of such kind of logic, and call in6_selectsrc
153                  * and in6_pcbsetport in order to fill in the local address
154                  * and the local port.
155                  */
156                 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
157                 if (sin6->sin6_port == 0) {
158                         error = EADDRNOTAVAIL;
159                         goto release;
160                 }
161
162                 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
163                         /* how about ::ffff:0.0.0.0 case? */
164                         error = EISCONN;
165                         goto release;
166                 }
167
168                 /* protect *sin6 from overwrites */
169                 tmp = *sin6;
170                 sin6 = &tmp;
171
172                 faddr = &sin6->sin6_addr;
173                 fport = sin6->sin6_port; /* allow 0 port */
174
175                 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
176                         if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
177                                 /*
178                                  * I believe we should explicitly discard the
179                                  * packet when mapped addresses are disabled,
180                                  * rather than send the packet as an IPv6 one.
181                                  * If we chose the latter approach, the packet
182                                  * might be sent out on the wire based on the
183                                  * default route, the situation which we'd
184                                  * probably want to avoid.
185                                  * (20010421 jinmei@kame.net)
186                                  */
187                                 error = EINVAL;
188                                 goto release;
189                         } else
190                                 af = AF_INET;
191                 }
192
193                 /* KAME hack: embed scopeid */
194                 if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
195                         error = EINVAL;
196                         goto release;
197                 }
198
199                 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
200                         laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
201                                               in6p->in6p_moptions,
202                                               &in6p->in6p_route,
203                                               &in6p->in6p_laddr, &error);
204                 } else
205                         laddr = &in6p->in6p_laddr;      /* XXX */
206                 if (laddr == NULL) {
207                         if (error == 0)
208                                 error = EADDRNOTAVAIL;
209                         goto release;
210                 }
211                 if (in6p->in6p_lport == 0 &&
212                     (error = in6_pcbsetport(laddr, in6p, td)) != 0)
213                         goto release;
214         } else {
215                 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
216                         error = ENOTCONN;
217                         goto release;
218                 }
219                 if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) {
220                         if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
221                                 /*
222                                  * XXX: this case would happen when the
223                                  * application sets the V6ONLY flag after
224                                  * connecting the foreign address.
225                                  * Such applications should be fixed,
226                                  * so we bark here.
227                                  */
228                                 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
229                                     "option was set for a connected socket\n");
230                                 error = EINVAL;
231                                 goto release;
232                         } else
233                                 af = AF_INET;
234                 }
235                 laddr = &in6p->in6p_laddr;
236                 faddr = &in6p->in6p_faddr;
237                 fport = in6p->in6p_fport;
238         }
239
240         if (af == AF_INET)
241                 hlen = sizeof(struct ip);
242
243         /*
244          * Calculate data length and get a mbuf
245          * for UDP and IP6 headers.
246          */
247         M_PREPEND(m, hlen + sizeof(struct udphdr), MB_DONTWAIT);
248         if (m == 0) {
249                 error = ENOBUFS;
250                 goto release;
251         }
252
253         /*
254          * Stuff checksum and output datagram.
255          */
256         udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
257         udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
258         udp6->uh_dport = fport;
259         if (plen <= 0xffff)
260                 udp6->uh_ulen = htons((u_short)plen);
261         else
262                 udp6->uh_ulen = 0;
263         udp6->uh_sum = 0;
264
265         switch (af) {
266         case AF_INET6:
267                 ip6 = mtod(m, struct ip6_hdr *);
268                 ip6->ip6_flow   = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
269                 ip6->ip6_vfc    &= ~IPV6_VERSION_MASK;
270                 ip6->ip6_vfc    |= IPV6_VERSION;
271 #if 0                           /* ip6_plen will be filled in ip6_output. */
272                 ip6->ip6_plen   = htons((u_short)plen);
273 #endif
274                 ip6->ip6_nxt    = IPPROTO_UDP;
275                 ip6->ip6_hlim   = in6_selecthlim(in6p,
276                                                  in6p->in6p_route.ro_rt ?
277                                                  in6p->in6p_route.ro_rt->rt_ifp : NULL);
278                 ip6->ip6_src    = *laddr;
279                 ip6->ip6_dst    = *faddr;
280
281                 if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
282                                 sizeof(struct ip6_hdr), plen)) == 0) {
283                         udp6->uh_sum = 0xffff;
284                 }
285
286                 flags = 0;
287
288                 udp6stat.udp6s_opackets++;
289                 error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route,
290                     flags, in6p->in6p_moptions, NULL, in6p);
291                 break;
292         case AF_INET:
293                 error = EAFNOSUPPORT;
294                 goto release;
295         }
296         goto releaseopt;
297
298 release:
299         m_freem(m);
300
301 releaseopt:
302         if (control) {
303                 ip6_clearpktopts(in6p->in6p_outputopts, 0, -1);
304                 in6p->in6p_outputopts = stickyopt;
305                 m_freem(control);
306         }
307         return (error);
308 }