Merge from vendor branch FILE:
[dragonfly.git] / sys / dev / netif / ti / if_ti.c
1 /*
2  * Copyright (c) 1997, 1998, 1999
3  *      Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *      This product includes software developed by Bill Paul.
16  * 4. Neither the name of the author nor the names of any co-contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30  * THE POSSIBILITY OF SUCH DAMAGE.
31  *
32  * $FreeBSD: src/sys/pci/if_ti.c,v 1.25.2.14 2002/02/15 04:20:20 silby Exp $
33  * $DragonFly: src/sys/dev/netif/ti/if_ti.c,v 1.14 2004/07/29 08:46:23 dillon Exp $
34  *
35  * $FreeBSD: src/sys/pci/if_ti.c,v 1.25.2.14 2002/02/15 04:20:20 silby Exp $
36  */
37
38 /*
39  * Alteon Networks Tigon PCI gigabit ethernet driver for FreeBSD.
40  * Manuals, sample driver and firmware source kits are available
41  * from http://www.alteon.com/support/openkits.
42  * 
43  * Written by Bill Paul <wpaul@ctr.columbia.edu>
44  * Electrical Engineering Department
45  * Columbia University, New York City
46  */
47
48 /*
49  * The Alteon Networks Tigon chip contains an embedded R4000 CPU,
50  * gigabit MAC, dual DMA channels and a PCI interface unit. NICs
51  * using the Tigon may have anywhere from 512K to 2MB of SRAM. The
52  * Tigon supports hardware IP, TCP and UCP checksumming, multicast
53  * filtering and jumbo (9014 byte) frames. The hardware is largely
54  * controlled by firmware, which must be loaded into the NIC during
55  * initialization.
56  *
57  * The Tigon 2 contains 2 R4000 CPUs and requires a newer firmware
58  * revision, which supports new features such as extended commands,
59  * extended jumbo receive ring desciptors and a mini receive ring.
60  *
61  * Alteon Networks is to be commended for releasing such a vast amount
62  * of development material for the Tigon NIC without requiring an NDA
63  * (although they really should have done it a long time ago). With
64  * any luck, the other vendors will finally wise up and follow Alteon's
65  * stellar example.
66  *
67  * The firmware for the Tigon 1 and 2 NICs is compiled directly into
68  * this driver by #including it as a C header file. This bloats the
69  * driver somewhat, but it's the easiest method considering that the
70  * driver code and firmware code need to be kept in sync. The source
71  * for the firmware is not provided with the FreeBSD distribution since
72  * compiling it requires a GNU toolchain targeted for mips-sgi-irix5.3.
73  *
74  * The following people deserve special thanks:
75  * - Terry Murphy of 3Com, for providing a 3c985 Tigon 1 board
76  *   for testing
77  * - Raymond Lee of Netgear, for providing a pair of Netgear
78  *   GA620 Tigon 2 boards for testing
79  * - Ulf Zimmermann, for bringing the GA260 to my attention and
80  *   convincing me to write this driver.
81  * - Andrew Gallatin for providing FreeBSD/Alpha support.
82  */
83
84 #include <sys/param.h>
85 #include <sys/systm.h>
86 #include <sys/sockio.h>
87 #include <sys/mbuf.h>
88 #include <sys/malloc.h>
89 #include <sys/kernel.h>
90 #include <sys/socket.h>
91 #include <sys/queue.h>
92
93 #include <net/if.h>
94 #include <net/if_arp.h>
95 #include <net/ethernet.h>
96 #include <net/if_dl.h>
97 #include <net/if_media.h>
98 #include <net/if_types.h>
99 #include <net/vlan/if_vlan_var.h>
100
101 #include <net/bpf.h>
102
103 #include <netinet/in_systm.h>
104 #include <netinet/in.h>
105 #include <netinet/ip.h>
106
107 #include <vm/vm.h>              /* for vtophys */
108 #include <vm/pmap.h>            /* for vtophys */
109 #include <machine/clock.h>      /* for DELAY */
110 #include <machine/bus_memio.h>
111 #include <machine/bus.h>
112 #include <machine/resource.h>
113 #include <sys/bus.h>
114 #include <sys/rman.h>
115
116 #include <bus/pci/pcireg.h>
117 #include <bus/pci/pcivar.h>
118
119 #include "if_tireg.h"
120 #include "ti_fw.h"
121 #include "ti_fw2.h"
122
123 /*
124  * Temporarily disable the checksum offload support for now.
125  * Tests with ftp.freesoftware.com show that after about 12 hours,
126  * the firmware will begin calculating completely bogus TX checksums
127  * and refuse to stop until the interface is reset. Unfortunately,
128  * there isn't enough time to fully debug this before the 4.1
129  * release, so this will need to stay off for now.
130  */
131 #ifdef notdef
132 #define TI_CSUM_FEATURES        (CSUM_IP | CSUM_TCP | CSUM_UDP | CSUM_IP_FRAGS)
133 #else
134 #define TI_CSUM_FEATURES        0
135 #endif
136
137 /*
138  * Various supported device vendors/types and their names.
139  */
140
141 static struct ti_type ti_devs[] = {
142         { ALT_VENDORID, ALT_DEVICEID_ACENIC,
143                 "Alteon AceNIC 1000baseSX Gigabit Ethernet" },
144         { ALT_VENDORID, ALT_DEVICEID_ACENIC_COPPER,
145                 "Alteon AceNIC 1000baseT Gigabit Ethernet" },
146         { TC_VENDORID,  TC_DEVICEID_3C985,
147                 "3Com 3c985-SX Gigabit Ethernet" },
148         { NG_VENDORID, NG_DEVICEID_GA620,
149                 "Netgear GA620 1000baseSX Gigabit Ethernet" },
150         { NG_VENDORID, NG_DEVICEID_GA620T,
151                 "Netgear GA620 1000baseT Gigabit Ethernet" },
152         { SGI_VENDORID, SGI_DEVICEID_TIGON,
153                 "Silicon Graphics Gigabit Ethernet" },
154         { DEC_VENDORID, DEC_DEVICEID_FARALLON_PN9000SX,
155                 "Farallon PN9000SX Gigabit Ethernet" },
156         { 0, 0, NULL }
157 };
158
159 static int ti_probe             (device_t);
160 static int ti_attach            (device_t);
161 static int ti_detach            (device_t);
162 static void ti_txeof            (struct ti_softc *);
163 static void ti_rxeof            (struct ti_softc *);
164
165 static void ti_stats_update     (struct ti_softc *);
166 static int ti_encap             (struct ti_softc *, struct mbuf *,
167                                         u_int32_t *);
168
169 static void ti_intr             (void *);
170 static void ti_start            (struct ifnet *);
171 static int ti_ioctl             (struct ifnet *, u_long, caddr_t,
172                                         struct ucred *);
173 static void ti_init             (void *);
174 static void ti_init2            (struct ti_softc *);
175 static void ti_stop             (struct ti_softc *);
176 static void ti_watchdog         (struct ifnet *);
177 static void ti_shutdown         (device_t);
178 static int ti_ifmedia_upd       (struct ifnet *);
179 static void ti_ifmedia_sts      (struct ifnet *, struct ifmediareq *);
180
181 static u_int32_t ti_eeprom_putbyte      (struct ti_softc *, int);
182 static u_int8_t ti_eeprom_getbyte       (struct ti_softc *,
183                                                 int, u_int8_t *);
184 static int ti_read_eeprom       (struct ti_softc *, caddr_t, int, int);
185
186 static void ti_add_mcast        (struct ti_softc *, struct ether_addr *);
187 static void ti_del_mcast        (struct ti_softc *, struct ether_addr *);
188 static void ti_setmulti         (struct ti_softc *);
189
190 static void ti_mem              (struct ti_softc *, u_int32_t,
191                                         u_int32_t, caddr_t);
192 static void ti_loadfw           (struct ti_softc *);
193 static void ti_cmd              (struct ti_softc *, struct ti_cmd_desc *);
194 static void ti_cmd_ext          (struct ti_softc *, struct ti_cmd_desc *,
195                                         caddr_t, int);
196 static void ti_handle_events    (struct ti_softc *);
197 static int ti_alloc_jumbo_mem   (struct ti_softc *);
198 static void *ti_jalloc          (struct ti_softc *);
199 static void ti_jfree            (caddr_t, u_int);
200 static void ti_jref             (caddr_t, u_int);
201 static int ti_newbuf_std        (struct ti_softc *, int, struct mbuf *);
202 static int ti_newbuf_mini       (struct ti_softc *, int, struct mbuf *);
203 static int ti_newbuf_jumbo      (struct ti_softc *, int, struct mbuf *);
204 static int ti_init_rx_ring_std  (struct ti_softc *);
205 static void ti_free_rx_ring_std (struct ti_softc *);
206 static int ti_init_rx_ring_jumbo        (struct ti_softc *);
207 static void ti_free_rx_ring_jumbo       (struct ti_softc *);
208 static int ti_init_rx_ring_mini (struct ti_softc *);
209 static void ti_free_rx_ring_mini        (struct ti_softc *);
210 static void ti_free_tx_ring     (struct ti_softc *);
211 static int ti_init_tx_ring      (struct ti_softc *);
212
213 static int ti_64bitslot_war     (struct ti_softc *);
214 static int ti_chipinit          (struct ti_softc *);
215 static int ti_gibinit           (struct ti_softc *);
216
217 static device_method_t ti_methods[] = {
218         /* Device interface */
219         DEVMETHOD(device_probe,         ti_probe),
220         DEVMETHOD(device_attach,        ti_attach),
221         DEVMETHOD(device_detach,        ti_detach),
222         DEVMETHOD(device_shutdown,      ti_shutdown),
223         { 0, 0 }
224 };
225
226 static driver_t ti_driver = {
227         "ti",
228         ti_methods,
229         sizeof(struct ti_softc)
230 };
231
232 static devclass_t ti_devclass;
233
234 DECLARE_DUMMY_MODULE(if_ti);
235 DRIVER_MODULE(if_ti, pci, ti_driver, ti_devclass, 0, 0);
236
237 /*
238  * Send an instruction or address to the EEPROM, check for ACK.
239  */
240 static u_int32_t ti_eeprom_putbyte(sc, byte)
241         struct ti_softc         *sc;
242         int                     byte;
243 {
244         int             i, ack = 0;
245
246         /*
247          * Make sure we're in TX mode.
248          */
249         TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
250
251         /*
252          * Feed in each bit and stobe the clock.
253          */
254         for (i = 0x80; i; i >>= 1) {
255                 if (byte & i) {
256                         TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT);
257                 } else {
258                         TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT);
259                 }
260                 DELAY(1);
261                 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
262                 DELAY(1);
263                 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
264         }
265
266         /*
267          * Turn off TX mode.
268          */
269         TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
270
271         /*
272          * Check for ack.
273          */
274         TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
275         ack = CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN;
276         TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
277
278         return(ack);
279 }
280
281 /*
282  * Read a byte of data stored in the EEPROM at address 'addr.'
283  * We have to send two address bytes since the EEPROM can hold
284  * more than 256 bytes of data.
285  */
286 static u_int8_t ti_eeprom_getbyte(sc, addr, dest)
287         struct ti_softc         *sc;
288         int                     addr;
289         u_int8_t                *dest;
290 {
291         int             i;
292         u_int8_t                byte = 0;
293
294         EEPROM_START;
295
296         /*
297          * Send write control code to EEPROM.
298          */
299         if (ti_eeprom_putbyte(sc, EEPROM_CTL_WRITE)) {
300                 printf("ti%d: failed to send write command, status: %x\n",
301                     sc->ti_unit, CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
302                 return(1);
303         }
304
305         /*
306          * Send first byte of address of byte we want to read.
307          */
308         if (ti_eeprom_putbyte(sc, (addr >> 8) & 0xFF)) {
309                 printf("ti%d: failed to send address, status: %x\n",
310                     sc->ti_unit, CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
311                 return(1);
312         }
313         /*
314          * Send second byte address of byte we want to read.
315          */
316         if (ti_eeprom_putbyte(sc, addr & 0xFF)) {
317                 printf("ti%d: failed to send address, status: %x\n",
318                     sc->ti_unit, CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
319                 return(1);
320         }
321
322         EEPROM_STOP;
323         EEPROM_START;
324         /*
325          * Send read control code to EEPROM.
326          */
327         if (ti_eeprom_putbyte(sc, EEPROM_CTL_READ)) {
328                 printf("ti%d: failed to send read command, status: %x\n",
329                     sc->ti_unit, CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
330                 return(1);
331         }
332
333         /*
334          * Start reading bits from EEPROM.
335          */
336         TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
337         for (i = 0x80; i; i >>= 1) {
338                 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
339                 DELAY(1);
340                 if (CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN)
341                         byte |= i;
342                 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
343                 DELAY(1);
344         }
345
346         EEPROM_STOP;
347
348         /*
349          * No ACK generated for read, so just return byte.
350          */
351
352         *dest = byte;
353
354         return(0);
355 }
356
357 /*
358  * Read a sequence of bytes from the EEPROM.
359  */
360 static int ti_read_eeprom(sc, dest, off, cnt)
361         struct ti_softc         *sc;
362         caddr_t                 dest;
363         int                     off;
364         int                     cnt;
365 {
366         int                     err = 0, i;
367         u_int8_t                byte = 0;
368
369         for (i = 0; i < cnt; i++) {
370                 err = ti_eeprom_getbyte(sc, off + i, &byte);
371                 if (err)
372                         break;
373                 *(dest + i) = byte;
374         }
375
376         return(err ? 1 : 0);
377 }
378
379 /*
380  * NIC memory access function. Can be used to either clear a section
381  * of NIC local memory or (if buf is non-NULL) copy data into it.
382  */
383 static void ti_mem(sc, addr, len, buf)
384         struct ti_softc         *sc;
385         u_int32_t               addr, len;
386         caddr_t                 buf;
387 {
388         int                     segptr, segsize, cnt;
389         caddr_t                 ti_winbase, ptr;
390
391         segptr = addr;
392         cnt = len;
393         ti_winbase = (caddr_t)(sc->ti_vhandle + TI_WINDOW);
394         ptr = buf;
395
396         while(cnt) {
397                 if (cnt < TI_WINLEN)
398                         segsize = cnt;
399                 else
400                         segsize = TI_WINLEN - (segptr % TI_WINLEN);
401                 CSR_WRITE_4(sc, TI_WINBASE, (segptr & ~(TI_WINLEN - 1)));
402                 if (buf == NULL)
403                         bzero((char *)ti_winbase + (segptr &
404                             (TI_WINLEN - 1)), segsize);
405                 else {
406                         bcopy((char *)ptr, (char *)ti_winbase +
407                             (segptr & (TI_WINLEN - 1)), segsize);
408                         ptr += segsize;
409                 }
410                 segptr += segsize;
411                 cnt -= segsize;
412         }
413
414         return;
415 }
416
417 /*
418  * Load firmware image into the NIC. Check that the firmware revision
419  * is acceptable and see if we want the firmware for the Tigon 1 or
420  * Tigon 2.
421  */
422 static void ti_loadfw(sc)
423         struct ti_softc         *sc;
424 {
425         switch(sc->ti_hwrev) {
426         case TI_HWREV_TIGON:
427                 if (tigonFwReleaseMajor != TI_FIRMWARE_MAJOR ||
428                     tigonFwReleaseMinor != TI_FIRMWARE_MINOR ||
429                     tigonFwReleaseFix != TI_FIRMWARE_FIX) {
430                         printf("ti%d: firmware revision mismatch; want "
431                             "%d.%d.%d, got %d.%d.%d\n", sc->ti_unit,
432                             TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR,
433                             TI_FIRMWARE_FIX, tigonFwReleaseMajor,
434                             tigonFwReleaseMinor, tigonFwReleaseFix);
435                         return;
436                 }
437                 ti_mem(sc, tigonFwTextAddr, tigonFwTextLen,
438                     (caddr_t)tigonFwText);
439                 ti_mem(sc, tigonFwDataAddr, tigonFwDataLen,
440                     (caddr_t)tigonFwData);
441                 ti_mem(sc, tigonFwRodataAddr, tigonFwRodataLen,
442                     (caddr_t)tigonFwRodata);
443                 ti_mem(sc, tigonFwBssAddr, tigonFwBssLen, NULL);
444                 ti_mem(sc, tigonFwSbssAddr, tigonFwSbssLen, NULL);
445                 CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigonFwStartAddr);
446                 break;
447         case TI_HWREV_TIGON_II:
448                 if (tigon2FwReleaseMajor != TI_FIRMWARE_MAJOR ||
449                     tigon2FwReleaseMinor != TI_FIRMWARE_MINOR ||
450                     tigon2FwReleaseFix != TI_FIRMWARE_FIX) {
451                         printf("ti%d: firmware revision mismatch; want "
452                             "%d.%d.%d, got %d.%d.%d\n", sc->ti_unit,
453                             TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR,
454                             TI_FIRMWARE_FIX, tigon2FwReleaseMajor,
455                             tigon2FwReleaseMinor, tigon2FwReleaseFix);
456                         return;
457                 }
458                 ti_mem(sc, tigon2FwTextAddr, tigon2FwTextLen,
459                     (caddr_t)tigon2FwText);
460                 ti_mem(sc, tigon2FwDataAddr, tigon2FwDataLen,
461                     (caddr_t)tigon2FwData);
462                 ti_mem(sc, tigon2FwRodataAddr, tigon2FwRodataLen,
463                     (caddr_t)tigon2FwRodata);
464                 ti_mem(sc, tigon2FwBssAddr, tigon2FwBssLen, NULL);
465                 ti_mem(sc, tigon2FwSbssAddr, tigon2FwSbssLen, NULL);
466                 CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigon2FwStartAddr);
467                 break;
468         default:
469                 printf("ti%d: can't load firmware: unknown hardware rev\n",
470                     sc->ti_unit);
471                 break;
472         }
473
474         return;
475 }
476
477 /*
478  * Send the NIC a command via the command ring.
479  */
480 static void ti_cmd(sc, cmd)
481         struct ti_softc         *sc;
482         struct ti_cmd_desc      *cmd;
483 {
484         u_int32_t               index;
485
486         if (sc->ti_rdata->ti_cmd_ring == NULL)
487                 return;
488
489         index = sc->ti_cmd_saved_prodidx;
490         CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(u_int32_t *)(cmd));
491         TI_INC(index, TI_CMD_RING_CNT);
492         CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index);
493         sc->ti_cmd_saved_prodidx = index;
494
495         return;
496 }
497
498 /*
499  * Send the NIC an extended command. The 'len' parameter specifies the
500  * number of command slots to include after the initial command.
501  */
502 static void ti_cmd_ext(sc, cmd, arg, len)
503         struct ti_softc         *sc;
504         struct ti_cmd_desc      *cmd;
505         caddr_t                 arg;
506         int                     len;
507 {
508         u_int32_t               index;
509         int             i;
510
511         if (sc->ti_rdata->ti_cmd_ring == NULL)
512                 return;
513
514         index = sc->ti_cmd_saved_prodidx;
515         CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(u_int32_t *)(cmd));
516         TI_INC(index, TI_CMD_RING_CNT);
517         for (i = 0; i < len; i++) {
518                 CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4),
519                     *(u_int32_t *)(&arg[i * 4]));
520                 TI_INC(index, TI_CMD_RING_CNT);
521         }
522         CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index);
523         sc->ti_cmd_saved_prodidx = index;
524
525         return;
526 }
527
528 /*
529  * Handle events that have triggered interrupts.
530  */
531 static void ti_handle_events(sc)
532         struct ti_softc         *sc;
533 {
534         struct ti_event_desc    *e;
535
536         if (sc->ti_rdata->ti_event_ring == NULL)
537                 return;
538
539         while (sc->ti_ev_saved_considx != sc->ti_ev_prodidx.ti_idx) {
540                 e = &sc->ti_rdata->ti_event_ring[sc->ti_ev_saved_considx];
541                 switch(e->ti_event) {
542                 case TI_EV_LINKSTAT_CHANGED:
543                         sc->ti_linkstat = e->ti_code;
544                         if (e->ti_code == TI_EV_CODE_LINK_UP)
545                                 printf("ti%d: 10/100 link up\n", sc->ti_unit);
546                         else if (e->ti_code == TI_EV_CODE_GIG_LINK_UP)
547                                 printf("ti%d: gigabit link up\n", sc->ti_unit);
548                         else if (e->ti_code == TI_EV_CODE_LINK_DOWN)
549                                 printf("ti%d: link down\n", sc->ti_unit);
550                         break;
551                 case TI_EV_ERROR:
552                         if (e->ti_code == TI_EV_CODE_ERR_INVAL_CMD)
553                                 printf("ti%d: invalid command\n", sc->ti_unit);
554                         else if (e->ti_code == TI_EV_CODE_ERR_UNIMP_CMD)
555                                 printf("ti%d: unknown command\n", sc->ti_unit);
556                         else if (e->ti_code == TI_EV_CODE_ERR_BADCFG)
557                                 printf("ti%d: bad config data\n", sc->ti_unit);
558                         break;
559                 case TI_EV_FIRMWARE_UP:
560                         ti_init2(sc);
561                         break;
562                 case TI_EV_STATS_UPDATED:
563                         ti_stats_update(sc);
564                         break;
565                 case TI_EV_RESET_JUMBO_RING:
566                 case TI_EV_MCAST_UPDATED:
567                         /* Who cares. */
568                         break;
569                 default:
570                         printf("ti%d: unknown event: %d\n",
571                             sc->ti_unit, e->ti_event);
572                         break;
573                 }
574                 /* Advance the consumer index. */
575                 TI_INC(sc->ti_ev_saved_considx, TI_EVENT_RING_CNT);
576                 CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, sc->ti_ev_saved_considx);
577         }
578
579         return;
580 }
581
582 /*
583  * Memory management for the jumbo receive ring is a pain in the
584  * butt. We need to allocate at least 9018 bytes of space per frame,
585  * _and_ it has to be contiguous (unless you use the extended
586  * jumbo descriptor format). Using malloc() all the time won't
587  * work: malloc() allocates memory in powers of two, which means we
588  * would end up wasting a considerable amount of space by allocating
589  * 9K chunks. We don't have a jumbo mbuf cluster pool. Thus, we have
590  * to do our own memory management.
591  *
592  * The driver needs to allocate a contiguous chunk of memory at boot
593  * time. We then chop this up ourselves into 9K pieces and use them
594  * as external mbuf storage.
595  *
596  * One issue here is how much memory to allocate. The jumbo ring has
597  * 256 slots in it, but at 9K per slot than can consume over 2MB of
598  * RAM. This is a bit much, especially considering we also need
599  * RAM for the standard ring and mini ring (on the Tigon 2). To
600  * save space, we only actually allocate enough memory for 64 slots
601  * by default, which works out to between 500 and 600K. This can
602  * be tuned by changing a #define in if_tireg.h.
603  */
604
605 static int ti_alloc_jumbo_mem(sc)
606         struct ti_softc         *sc;
607 {
608         caddr_t                 ptr;
609         int             i;
610         struct ti_jpool_entry   *entry;
611
612         /* Grab a big chunk o' storage. */
613         sc->ti_cdata.ti_jumbo_buf = contigmalloc(TI_JMEM, M_DEVBUF,
614                 M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
615
616         if (sc->ti_cdata.ti_jumbo_buf == NULL) {
617                 printf("ti%d: no memory for jumbo buffers!\n", sc->ti_unit);
618                 return(ENOBUFS);
619         }
620
621         SLIST_INIT(&sc->ti_jfree_listhead);
622         SLIST_INIT(&sc->ti_jinuse_listhead);
623
624         /*
625          * Now divide it up into 9K pieces and save the addresses
626          * in an array. Note that we play an evil trick here by using
627          * the first few bytes in the buffer to hold the the address
628          * of the softc structure for this interface. This is because
629          * ti_jfree() needs it, but it is called by the mbuf management
630          * code which will not pass it to us explicitly.
631          */
632         ptr = sc->ti_cdata.ti_jumbo_buf;
633         for (i = 0; i < TI_JSLOTS; i++) {
634                 u_int64_t               **aptr;
635                 aptr = (u_int64_t **)ptr;
636                 aptr[0] = (u_int64_t *)sc;
637                 ptr += sizeof(u_int64_t);
638                 sc->ti_cdata.ti_jslots[i].ti_buf = ptr;
639                 sc->ti_cdata.ti_jslots[i].ti_inuse = 0;
640                 ptr += (TI_JLEN - sizeof(u_int64_t));
641                 entry = malloc(sizeof(struct ti_jpool_entry), 
642                                M_DEVBUF, M_WAITOK);
643                 if (entry == NULL) {
644                         contigfree(sc->ti_cdata.ti_jumbo_buf, TI_JMEM,
645                                    M_DEVBUF);
646                         sc->ti_cdata.ti_jumbo_buf = NULL;
647                         printf("ti%d: no memory for jumbo "
648                             "buffer queue!\n", sc->ti_unit);
649                         return(ENOBUFS);
650                 }
651                 entry->slot = i;
652                 SLIST_INSERT_HEAD(&sc->ti_jfree_listhead, entry, jpool_entries);
653         }
654
655         return(0);
656 }
657
658 /*
659  * Allocate a jumbo buffer.
660  */
661 static void *ti_jalloc(sc)
662         struct ti_softc         *sc;
663 {
664         struct ti_jpool_entry   *entry;
665         
666         entry = SLIST_FIRST(&sc->ti_jfree_listhead);
667         
668         if (entry == NULL) {
669                 printf("ti%d: no free jumbo buffers\n", sc->ti_unit);
670                 return(NULL);
671         }
672
673         SLIST_REMOVE_HEAD(&sc->ti_jfree_listhead, jpool_entries);
674         SLIST_INSERT_HEAD(&sc->ti_jinuse_listhead, entry, jpool_entries);
675         sc->ti_cdata.ti_jslots[entry->slot].ti_inuse = 1;
676         return(sc->ti_cdata.ti_jslots[entry->slot].ti_buf);
677 }
678
679 /*
680  * Adjust usage count on a jumbo buffer. In general this doesn't
681  * get used much because our jumbo buffers don't get passed around
682  * too much, but it's implemented for correctness.
683  */
684 static void ti_jref(buf, size)
685         caddr_t                 buf;
686         u_int                   size;
687 {
688         struct ti_softc         *sc;
689         u_int64_t               **aptr;
690         int             i;
691
692         /* Extract the softc struct pointer. */
693         aptr = (u_int64_t **)(buf - sizeof(u_int64_t));
694         sc = (struct ti_softc *)(aptr[0]);
695
696         if (sc == NULL)
697                 panic("ti_jref: can't find softc pointer!");
698
699         if (size != TI_JUMBO_FRAMELEN)
700                 panic("ti_jref: adjusting refcount of buf of wrong size!");
701
702         /* calculate the slot this buffer belongs to */
703
704         i = ((vm_offset_t)aptr 
705              - (vm_offset_t)sc->ti_cdata.ti_jumbo_buf) / TI_JLEN;
706
707         if ((i < 0) || (i >= TI_JSLOTS))
708                 panic("ti_jref: asked to reference buffer "
709                     "that we don't manage!");
710         else if (sc->ti_cdata.ti_jslots[i].ti_inuse == 0)
711                 panic("ti_jref: buffer already free!");
712         else
713                 sc->ti_cdata.ti_jslots[i].ti_inuse++;
714
715         return;
716 }
717
718 /*
719  * Release a jumbo buffer.
720  */
721 static void ti_jfree(buf, size)
722         caddr_t                 buf;
723         u_int                   size;
724 {
725         struct ti_softc         *sc;
726         u_int64_t               **aptr;
727         int                     i;
728         struct ti_jpool_entry   *entry;
729
730         /* Extract the softc struct pointer. */
731         aptr = (u_int64_t **)(buf - sizeof(u_int64_t));
732         sc = (struct ti_softc *)(aptr[0]);
733
734         if (sc == NULL)
735                 panic("ti_jfree: can't find softc pointer!");
736
737         if (size != TI_JUMBO_FRAMELEN)
738                 panic("ti_jfree: freeing buffer of wrong size!");
739
740         /* calculate the slot this buffer belongs to */
741
742         i = ((vm_offset_t)aptr 
743              - (vm_offset_t)sc->ti_cdata.ti_jumbo_buf) / TI_JLEN;
744
745         if ((i < 0) || (i >= TI_JSLOTS))
746                 panic("ti_jfree: asked to free buffer that we don't manage!");
747         else if (sc->ti_cdata.ti_jslots[i].ti_inuse == 0)
748                 panic("ti_jfree: buffer already free!");
749         else {
750                 sc->ti_cdata.ti_jslots[i].ti_inuse--;
751                 if(sc->ti_cdata.ti_jslots[i].ti_inuse == 0) {
752                         entry = SLIST_FIRST(&sc->ti_jinuse_listhead);
753                         if (entry == NULL)
754                                 panic("ti_jfree: buffer not in use!");
755                         entry->slot = i;
756                         SLIST_REMOVE_HEAD(&sc->ti_jinuse_listhead, 
757                                           jpool_entries);
758                         SLIST_INSERT_HEAD(&sc->ti_jfree_listhead, 
759                                           entry, jpool_entries);
760                 }
761         }
762
763         return;
764 }
765
766
767 /*
768  * Intialize a standard receive ring descriptor.
769  */
770 static int ti_newbuf_std(sc, i, m)
771         struct ti_softc         *sc;
772         int                     i;
773         struct mbuf             *m;
774 {
775         struct mbuf             *m_new = NULL;
776         struct ti_rx_desc       *r;
777
778         if (m == NULL) {
779                 MGETHDR(m_new, MB_DONTWAIT, MT_DATA);
780                 if (m_new == NULL)
781                         return(ENOBUFS);
782
783                 MCLGET(m_new, MB_DONTWAIT);
784                 if (!(m_new->m_flags & M_EXT)) {
785                         m_freem(m_new);
786                         return(ENOBUFS);
787                 }
788                 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
789         } else {
790                 m_new = m;
791                 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
792                 m_new->m_data = m_new->m_ext.ext_buf;
793         }
794
795         m_adj(m_new, ETHER_ALIGN);
796         sc->ti_cdata.ti_rx_std_chain[i] = m_new;
797         r = &sc->ti_rdata->ti_rx_std_ring[i];
798         TI_HOSTADDR(r->ti_addr) = vtophys(mtod(m_new, caddr_t));
799         r->ti_type = TI_BDTYPE_RECV_BD;
800         r->ti_flags = 0;
801         if (sc->arpcom.ac_if.if_hwassist)
802                 r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
803         r->ti_len = m_new->m_len;
804         r->ti_idx = i;
805
806         return(0);
807 }
808
809 /*
810  * Intialize a mini receive ring descriptor. This only applies to
811  * the Tigon 2.
812  */
813 static int ti_newbuf_mini(sc, i, m)
814         struct ti_softc         *sc;
815         int                     i;
816         struct mbuf             *m;
817 {
818         struct mbuf             *m_new = NULL;
819         struct ti_rx_desc       *r;
820
821         if (m == NULL) {
822                 MGETHDR(m_new, MB_DONTWAIT, MT_DATA);
823                 if (m_new == NULL) {
824                         return(ENOBUFS);
825                 }
826                 m_new->m_len = m_new->m_pkthdr.len = MHLEN;
827         } else {
828                 m_new = m;
829                 m_new->m_data = m_new->m_pktdat;
830                 m_new->m_len = m_new->m_pkthdr.len = MHLEN;
831         }
832
833         m_adj(m_new, ETHER_ALIGN);
834         r = &sc->ti_rdata->ti_rx_mini_ring[i];
835         sc->ti_cdata.ti_rx_mini_chain[i] = m_new;
836         TI_HOSTADDR(r->ti_addr) = vtophys(mtod(m_new, caddr_t));
837         r->ti_type = TI_BDTYPE_RECV_BD;
838         r->ti_flags = TI_BDFLAG_MINI_RING;
839         if (sc->arpcom.ac_if.if_hwassist)
840                 r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
841         r->ti_len = m_new->m_len;
842         r->ti_idx = i;
843
844         return(0);
845 }
846
847 /*
848  * Initialize a jumbo receive ring descriptor. This allocates
849  * a jumbo buffer from the pool managed internally by the driver.
850  */
851 static int ti_newbuf_jumbo(sc, i, m)
852         struct ti_softc         *sc;
853         int                     i;
854         struct mbuf             *m;
855 {
856         struct mbuf             *m_new = NULL;
857         struct ti_rx_desc       *r;
858
859         if (m == NULL) {
860                 caddr_t                 *buf = NULL;
861
862                 /* Allocate the mbuf. */
863                 MGETHDR(m_new, MB_DONTWAIT, MT_DATA);
864                 if (m_new == NULL) {
865                         return(ENOBUFS);
866                 }
867
868                 /* Allocate the jumbo buffer */
869                 buf = ti_jalloc(sc);
870                 if (buf == NULL) {
871                         m_freem(m_new);
872                         printf("ti%d: jumbo allocation failed "
873                             "-- packet dropped!\n", sc->ti_unit);
874                         return(ENOBUFS);
875                 }
876
877                 /* Attach the buffer to the mbuf. */
878                 m_new->m_data = m_new->m_ext.ext_buf = (void *)buf;
879                 m_new->m_flags |= M_EXT | M_EXT_OLD;
880                 m_new->m_len = m_new->m_pkthdr.len =
881                     m_new->m_ext.ext_size = TI_JUMBO_FRAMELEN;
882                 m_new->m_ext.ext_nfree.old = ti_jfree;
883                 m_new->m_ext.ext_nref.old = ti_jref;
884         } else {
885                 m_new = m;
886                 m_new->m_data = m_new->m_ext.ext_buf;
887                 m_new->m_ext.ext_size = TI_JUMBO_FRAMELEN;
888         }
889
890         m_adj(m_new, ETHER_ALIGN);
891         /* Set up the descriptor. */
892         r = &sc->ti_rdata->ti_rx_jumbo_ring[i];
893         sc->ti_cdata.ti_rx_jumbo_chain[i] = m_new;
894         TI_HOSTADDR(r->ti_addr) = vtophys(mtod(m_new, caddr_t));
895         r->ti_type = TI_BDTYPE_RECV_JUMBO_BD;
896         r->ti_flags = TI_BDFLAG_JUMBO_RING;
897         if (sc->arpcom.ac_if.if_hwassist)
898                 r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
899         r->ti_len = m_new->m_len;
900         r->ti_idx = i;
901
902         return(0);
903 }
904
905 /*
906  * The standard receive ring has 512 entries in it. At 2K per mbuf cluster,
907  * that's 1MB or memory, which is a lot. For now, we fill only the first
908  * 256 ring entries and hope that our CPU is fast enough to keep up with
909  * the NIC.
910  */
911 static int ti_init_rx_ring_std(sc)
912         struct ti_softc         *sc;
913 {
914         int             i;
915         struct ti_cmd_desc      cmd;
916
917         for (i = 0; i < TI_SSLOTS; i++) {
918                 if (ti_newbuf_std(sc, i, NULL) == ENOBUFS)
919                         return(ENOBUFS);
920         };
921
922         TI_UPDATE_STDPROD(sc, i - 1);
923         sc->ti_std = i - 1;
924
925         return(0);
926 }
927
928 static void ti_free_rx_ring_std(sc)
929         struct ti_softc         *sc;
930 {
931         int             i;
932
933         for (i = 0; i < TI_STD_RX_RING_CNT; i++) {
934                 if (sc->ti_cdata.ti_rx_std_chain[i] != NULL) {
935                         m_freem(sc->ti_cdata.ti_rx_std_chain[i]);
936                         sc->ti_cdata.ti_rx_std_chain[i] = NULL;
937                 }
938                 bzero((char *)&sc->ti_rdata->ti_rx_std_ring[i],
939                     sizeof(struct ti_rx_desc));
940         }
941
942         return;
943 }
944
945 static int ti_init_rx_ring_jumbo(sc)
946         struct ti_softc         *sc;
947 {
948         int             i;
949         struct ti_cmd_desc      cmd;
950
951         for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
952                 if (ti_newbuf_jumbo(sc, i, NULL) == ENOBUFS)
953                         return(ENOBUFS);
954         };
955
956         TI_UPDATE_JUMBOPROD(sc, i - 1);
957         sc->ti_jumbo = i - 1;
958
959         return(0);
960 }
961
962 static void ti_free_rx_ring_jumbo(sc)
963         struct ti_softc         *sc;
964 {
965         int             i;
966
967         for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
968                 if (sc->ti_cdata.ti_rx_jumbo_chain[i] != NULL) {
969                         m_freem(sc->ti_cdata.ti_rx_jumbo_chain[i]);
970                         sc->ti_cdata.ti_rx_jumbo_chain[i] = NULL;
971                 }
972                 bzero((char *)&sc->ti_rdata->ti_rx_jumbo_ring[i],
973                     sizeof(struct ti_rx_desc));
974         }
975
976         return;
977 }
978
979 static int ti_init_rx_ring_mini(sc)
980         struct ti_softc         *sc;
981 {
982         int             i;
983
984         for (i = 0; i < TI_MSLOTS; i++) {
985                 if (ti_newbuf_mini(sc, i, NULL) == ENOBUFS)
986                         return(ENOBUFS);
987         };
988
989         TI_UPDATE_MINIPROD(sc, i - 1);
990         sc->ti_mini = i - 1;
991
992         return(0);
993 }
994
995 static void ti_free_rx_ring_mini(sc)
996         struct ti_softc         *sc;
997 {
998         int             i;
999
1000         for (i = 0; i < TI_MINI_RX_RING_CNT; i++) {
1001                 if (sc->ti_cdata.ti_rx_mini_chain[i] != NULL) {
1002                         m_freem(sc->ti_cdata.ti_rx_mini_chain[i]);
1003                         sc->ti_cdata.ti_rx_mini_chain[i] = NULL;
1004                 }
1005                 bzero((char *)&sc->ti_rdata->ti_rx_mini_ring[i],
1006                     sizeof(struct ti_rx_desc));
1007         }
1008
1009         return;
1010 }
1011
1012 static void ti_free_tx_ring(sc)
1013         struct ti_softc         *sc;
1014 {
1015         int             i;
1016
1017         if (sc->ti_rdata->ti_tx_ring == NULL)
1018                 return;
1019
1020         for (i = 0; i < TI_TX_RING_CNT; i++) {
1021                 if (sc->ti_cdata.ti_tx_chain[i] != NULL) {
1022                         m_freem(sc->ti_cdata.ti_tx_chain[i]);
1023                         sc->ti_cdata.ti_tx_chain[i] = NULL;
1024                 }
1025                 bzero((char *)&sc->ti_rdata->ti_tx_ring[i],
1026                     sizeof(struct ti_tx_desc));
1027         }
1028
1029         return;
1030 }
1031
1032 static int ti_init_tx_ring(sc)
1033         struct ti_softc         *sc;
1034 {
1035         sc->ti_txcnt = 0;
1036         sc->ti_tx_saved_considx = 0;
1037         CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, 0);
1038         return(0);
1039 }
1040
1041 /*
1042  * The Tigon 2 firmware has a new way to add/delete multicast addresses,
1043  * but we have to support the old way too so that Tigon 1 cards will
1044  * work.
1045  */
1046 void ti_add_mcast(sc, addr)
1047         struct ti_softc         *sc;
1048         struct ether_addr       *addr;
1049 {
1050         struct ti_cmd_desc      cmd;
1051         u_int16_t               *m;
1052         u_int32_t               ext[2] = {0, 0};
1053
1054         m = (u_int16_t *)&addr->octet[0];
1055
1056         switch(sc->ti_hwrev) {
1057         case TI_HWREV_TIGON:
1058                 CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0]));
1059                 CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2]));
1060                 TI_DO_CMD(TI_CMD_ADD_MCAST_ADDR, 0, 0);
1061                 break;
1062         case TI_HWREV_TIGON_II:
1063                 ext[0] = htons(m[0]);
1064                 ext[1] = (htons(m[1]) << 16) | htons(m[2]);
1065                 TI_DO_CMD_EXT(TI_CMD_EXT_ADD_MCAST, 0, 0, (caddr_t)&ext, 2);
1066                 break;
1067         default:
1068                 printf("ti%d: unknown hwrev\n", sc->ti_unit);
1069                 break;
1070         }
1071
1072         return;
1073 }
1074
1075 void ti_del_mcast(sc, addr)
1076         struct ti_softc         *sc;
1077         struct ether_addr       *addr;
1078 {
1079         struct ti_cmd_desc      cmd;
1080         u_int16_t               *m;
1081         u_int32_t               ext[2] = {0, 0};
1082
1083         m = (u_int16_t *)&addr->octet[0];
1084
1085         switch(sc->ti_hwrev) {
1086         case TI_HWREV_TIGON:
1087                 CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0]));
1088                 CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2]));
1089                 TI_DO_CMD(TI_CMD_DEL_MCAST_ADDR, 0, 0);
1090                 break;
1091         case TI_HWREV_TIGON_II:
1092                 ext[0] = htons(m[0]);
1093                 ext[1] = (htons(m[1]) << 16) | htons(m[2]);
1094                 TI_DO_CMD_EXT(TI_CMD_EXT_DEL_MCAST, 0, 0, (caddr_t)&ext, 2);
1095                 break;
1096         default:
1097                 printf("ti%d: unknown hwrev\n", sc->ti_unit);
1098                 break;
1099         }
1100
1101         return;
1102 }
1103
1104 /*
1105  * Configure the Tigon's multicast address filter.
1106  *
1107  * The actual multicast table management is a bit of a pain, thanks to
1108  * slight brain damage on the part of both Alteon and us. With our
1109  * multicast code, we are only alerted when the multicast address table
1110  * changes and at that point we only have the current list of addresses:
1111  * we only know the current state, not the previous state, so we don't
1112  * actually know what addresses were removed or added. The firmware has
1113  * state, but we can't get our grubby mits on it, and there is no 'delete
1114  * all multicast addresses' command. Hence, we have to maintain our own
1115  * state so we know what addresses have been programmed into the NIC at
1116  * any given time.
1117  */
1118 static void ti_setmulti(sc)
1119         struct ti_softc         *sc;
1120 {
1121         struct ifnet            *ifp;
1122         struct ifmultiaddr      *ifma;
1123         struct ti_cmd_desc      cmd;
1124         struct ti_mc_entry      *mc;
1125         u_int32_t               intrs;
1126
1127         ifp = &sc->arpcom.ac_if;
1128
1129         if (ifp->if_flags & IFF_ALLMULTI) {
1130                 TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_ENB, 0);
1131                 return;
1132         } else {
1133                 TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_DIS, 0);
1134         }
1135
1136         /* Disable interrupts. */
1137         intrs = CSR_READ_4(sc, TI_MB_HOSTINTR);
1138         CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
1139
1140         /* First, zot all the existing filters. */
1141         while (sc->ti_mc_listhead.slh_first != NULL) {
1142                 mc = sc->ti_mc_listhead.slh_first;
1143                 ti_del_mcast(sc, &mc->mc_addr);
1144                 SLIST_REMOVE_HEAD(&sc->ti_mc_listhead, mc_entries);
1145                 free(mc, M_DEVBUF);
1146         }
1147
1148         /* Now program new ones. */
1149         for (ifma = ifp->if_multiaddrs.lh_first;
1150             ifma != NULL; ifma = ifma->ifma_link.le_next) {
1151                 if (ifma->ifma_addr->sa_family != AF_LINK)
1152                         continue;
1153                 mc = malloc(sizeof(struct ti_mc_entry), M_DEVBUF, M_INTWAIT);
1154                 bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
1155                     (char *)&mc->mc_addr, ETHER_ADDR_LEN);
1156                 SLIST_INSERT_HEAD(&sc->ti_mc_listhead, mc, mc_entries);
1157                 ti_add_mcast(sc, &mc->mc_addr);
1158         }
1159
1160         /* Re-enable interrupts. */
1161         CSR_WRITE_4(sc, TI_MB_HOSTINTR, intrs);
1162
1163         return;
1164 }
1165
1166 /*
1167  * Check to see if the BIOS has configured us for a 64 bit slot when
1168  * we aren't actually in one. If we detect this condition, we can work
1169  * around it on the Tigon 2 by setting a bit in the PCI state register,
1170  * but for the Tigon 1 we must give up and abort the interface attach.
1171  */
1172 static int ti_64bitslot_war(sc)
1173         struct ti_softc         *sc;
1174 {
1175         if (!(CSR_READ_4(sc, TI_PCI_STATE) & TI_PCISTATE_32BIT_BUS)) {
1176                 CSR_WRITE_4(sc, 0x600, 0);
1177                 CSR_WRITE_4(sc, 0x604, 0);
1178                 CSR_WRITE_4(sc, 0x600, 0x5555AAAA);
1179                 if (CSR_READ_4(sc, 0x604) == 0x5555AAAA) {
1180                         if (sc->ti_hwrev == TI_HWREV_TIGON)
1181                                 return(EINVAL);
1182                         else {
1183                                 TI_SETBIT(sc, TI_PCI_STATE,
1184                                     TI_PCISTATE_32BIT_BUS);
1185                                 return(0);
1186                         }
1187                 }
1188         }
1189
1190         return(0);
1191 }
1192
1193 /*
1194  * Do endian, PCI and DMA initialization. Also check the on-board ROM
1195  * self-test results.
1196  */
1197 static int ti_chipinit(sc)
1198         struct ti_softc         *sc;
1199 {
1200         u_int32_t               cacheline;
1201         u_int32_t               pci_writemax = 0;
1202
1203         /* Initialize link to down state. */
1204         sc->ti_linkstat = TI_EV_CODE_LINK_DOWN;
1205
1206         if (sc->arpcom.ac_if.if_capenable & IFCAP_HWCSUM)
1207                 sc->arpcom.ac_if.if_hwassist = TI_CSUM_FEATURES;
1208         else
1209                 sc->arpcom.ac_if.if_hwassist = 0;
1210
1211         /* Set endianness before we access any non-PCI registers. */
1212 #if BYTE_ORDER == BIG_ENDIAN
1213         CSR_WRITE_4(sc, TI_MISC_HOST_CTL,
1214             TI_MHC_BIGENDIAN_INIT | (TI_MHC_BIGENDIAN_INIT << 24));
1215 #else
1216         CSR_WRITE_4(sc, TI_MISC_HOST_CTL,
1217             TI_MHC_LITTLEENDIAN_INIT | (TI_MHC_LITTLEENDIAN_INIT << 24));
1218 #endif
1219
1220         /* Check the ROM failed bit to see if self-tests passed. */
1221         if (CSR_READ_4(sc, TI_CPU_STATE) & TI_CPUSTATE_ROMFAIL) {
1222                 printf("ti%d: board self-diagnostics failed!\n", sc->ti_unit);
1223                 return(ENODEV);
1224         }
1225
1226         /* Halt the CPU. */
1227         TI_SETBIT(sc, TI_CPU_STATE, TI_CPUSTATE_HALT);
1228
1229         /* Figure out the hardware revision. */
1230         switch(CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_CHIP_REV_MASK) {
1231         case TI_REV_TIGON_I:
1232                 sc->ti_hwrev = TI_HWREV_TIGON;
1233                 break;
1234         case TI_REV_TIGON_II:
1235                 sc->ti_hwrev = TI_HWREV_TIGON_II;
1236                 break;
1237         default:
1238                 printf("ti%d: unsupported chip revision\n", sc->ti_unit);
1239                 return(ENODEV);
1240         }
1241
1242         /* Do special setup for Tigon 2. */
1243         if (sc->ti_hwrev == TI_HWREV_TIGON_II) {
1244                 TI_SETBIT(sc, TI_CPU_CTL_B, TI_CPUSTATE_HALT);
1245                 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_SRAM_BANK_512K);
1246                 TI_SETBIT(sc, TI_MISC_CONF, TI_MCR_SRAM_SYNCHRONOUS);
1247         }
1248
1249         /* Set up the PCI state register. */
1250         CSR_WRITE_4(sc, TI_PCI_STATE, TI_PCI_READ_CMD|TI_PCI_WRITE_CMD);
1251         if (sc->ti_hwrev == TI_HWREV_TIGON_II) {
1252                 TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_USE_MEM_RD_MULT);
1253         }
1254
1255         /* Clear the read/write max DMA parameters. */
1256         TI_CLRBIT(sc, TI_PCI_STATE, (TI_PCISTATE_WRITE_MAXDMA|
1257             TI_PCISTATE_READ_MAXDMA));
1258
1259         /* Get cache line size. */
1260         cacheline = CSR_READ_4(sc, TI_PCI_BIST) & 0xFF;
1261
1262         /*
1263          * If the system has set enabled the PCI memory write
1264          * and invalidate command in the command register, set
1265          * the write max parameter accordingly. This is necessary
1266          * to use MWI with the Tigon 2.
1267          */
1268         if (CSR_READ_4(sc, TI_PCI_CMDSTAT) & PCIM_CMD_MWIEN) {
1269                 switch(cacheline) {
1270                 case 1:
1271                 case 4:
1272                 case 8:
1273                 case 16:
1274                 case 32:
1275                 case 64:
1276                         break;
1277                 default:
1278                 /* Disable PCI memory write and invalidate. */
1279                         if (bootverbose)
1280                                 printf("ti%d: cache line size %d not "
1281                                     "supported; disabling PCI MWI\n",
1282                                     sc->ti_unit, cacheline);
1283                         CSR_WRITE_4(sc, TI_PCI_CMDSTAT, CSR_READ_4(sc,
1284                             TI_PCI_CMDSTAT) & ~PCIM_CMD_MWIEN);
1285                         break;
1286                 }
1287         }
1288
1289 #ifdef __brokenalpha__
1290         /*
1291          * From the Alteon sample driver:
1292          * Must insure that we do not cross an 8K (bytes) boundary
1293          * for DMA reads.  Our highest limit is 1K bytes.  This is a 
1294          * restriction on some ALPHA platforms with early revision 
1295          * 21174 PCI chipsets, such as the AlphaPC 164lx 
1296          */
1297         TI_SETBIT(sc, TI_PCI_STATE, pci_writemax|TI_PCI_READMAX_1024);
1298 #else
1299         TI_SETBIT(sc, TI_PCI_STATE, pci_writemax);
1300 #endif
1301
1302         /* This sets the min dma param all the way up (0xff). */
1303         TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_MINDMA);
1304
1305         /* Configure DMA variables. */
1306 #if BYTE_ORDER == BIG_ENDIAN
1307         CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_BD |
1308             TI_OPMODE_BYTESWAP_DATA | TI_OPMODE_WORDSWAP_BD |
1309             TI_OPMODE_WARN_ENB | TI_OPMODE_FATAL_ENB |
1310             TI_OPMODE_DONT_FRAG_JUMBO);
1311 #else
1312         CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_DATA|
1313             TI_OPMODE_WORDSWAP_BD|TI_OPMODE_DONT_FRAG_JUMBO|
1314             TI_OPMODE_WARN_ENB|TI_OPMODE_FATAL_ENB);
1315 #endif
1316
1317         /*
1318          * Only allow 1 DMA channel to be active at a time.
1319          * I don't think this is a good idea, but without it
1320          * the firmware racks up lots of nicDmaReadRingFull
1321          * errors.  This is not compatible with hardware checksums.
1322          */
1323         if (sc->arpcom.ac_if.if_hwassist == 0)
1324                 TI_SETBIT(sc, TI_GCR_OPMODE, TI_OPMODE_1_DMA_ACTIVE);
1325
1326         /* Recommended settings from Tigon manual. */
1327         CSR_WRITE_4(sc, TI_GCR_DMA_WRITECFG, TI_DMA_STATE_THRESH_8W);
1328         CSR_WRITE_4(sc, TI_GCR_DMA_READCFG, TI_DMA_STATE_THRESH_8W);
1329
1330         if (ti_64bitslot_war(sc)) {
1331                 printf("ti%d: bios thinks we're in a 64 bit slot, "
1332                     "but we aren't", sc->ti_unit);
1333                 return(EINVAL);
1334         }
1335
1336         return(0);
1337 }
1338
1339 /*
1340  * Initialize the general information block and firmware, and
1341  * start the CPU(s) running.
1342  */
1343 static int ti_gibinit(sc)
1344         struct ti_softc         *sc;
1345 {
1346         struct ti_rcb           *rcb;
1347         int                     i;
1348         struct ifnet            *ifp;
1349
1350         ifp = &sc->arpcom.ac_if;
1351
1352         /* Disable interrupts for now. */
1353         CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
1354
1355         /* Tell the chip where to find the general information block. */
1356         CSR_WRITE_4(sc, TI_GCR_GENINFO_HI, 0);
1357         CSR_WRITE_4(sc, TI_GCR_GENINFO_LO, vtophys(&sc->ti_rdata->ti_info));
1358
1359         /* Load the firmware into SRAM. */
1360         ti_loadfw(sc);
1361
1362         /* Set up the contents of the general info and ring control blocks. */
1363
1364         /* Set up the event ring and producer pointer. */
1365         rcb = &sc->ti_rdata->ti_info.ti_ev_rcb;
1366
1367         TI_HOSTADDR(rcb->ti_hostaddr) = vtophys(&sc->ti_rdata->ti_event_ring);
1368         rcb->ti_flags = 0;
1369         TI_HOSTADDR(sc->ti_rdata->ti_info.ti_ev_prodidx_ptr) =
1370             vtophys(&sc->ti_ev_prodidx);
1371         sc->ti_ev_prodidx.ti_idx = 0;
1372         CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, 0);
1373         sc->ti_ev_saved_considx = 0;
1374
1375         /* Set up the command ring and producer mailbox. */
1376         rcb = &sc->ti_rdata->ti_info.ti_cmd_rcb;
1377
1378         sc->ti_rdata->ti_cmd_ring =
1379             (struct ti_cmd_desc *)(sc->ti_vhandle + TI_GCR_CMDRING);
1380         TI_HOSTADDR(rcb->ti_hostaddr) = TI_GCR_NIC_ADDR(TI_GCR_CMDRING);
1381         rcb->ti_flags = 0;
1382         rcb->ti_max_len = 0;
1383         for (i = 0; i < TI_CMD_RING_CNT; i++) {
1384                 CSR_WRITE_4(sc, TI_GCR_CMDRING + (i * 4), 0);
1385         }
1386         CSR_WRITE_4(sc, TI_GCR_CMDCONS_IDX, 0);
1387         CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, 0);
1388         sc->ti_cmd_saved_prodidx = 0;
1389
1390         /*
1391          * Assign the address of the stats refresh buffer.
1392          * We re-use the current stats buffer for this to
1393          * conserve memory.
1394          */
1395         TI_HOSTADDR(sc->ti_rdata->ti_info.ti_refresh_stats_ptr) =
1396             vtophys(&sc->ti_rdata->ti_info.ti_stats);
1397
1398         /* Set up the standard receive ring. */
1399         rcb = &sc->ti_rdata->ti_info.ti_std_rx_rcb;
1400         TI_HOSTADDR(rcb->ti_hostaddr) = vtophys(&sc->ti_rdata->ti_rx_std_ring);
1401         rcb->ti_max_len = TI_FRAMELEN;
1402         rcb->ti_flags = 0;
1403         if (sc->arpcom.ac_if.if_hwassist)
1404                 rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
1405                      TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
1406         rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
1407
1408         /* Set up the jumbo receive ring. */
1409         rcb = &sc->ti_rdata->ti_info.ti_jumbo_rx_rcb;
1410         TI_HOSTADDR(rcb->ti_hostaddr) =
1411             vtophys(&sc->ti_rdata->ti_rx_jumbo_ring);
1412         rcb->ti_max_len = TI_JUMBO_FRAMELEN;
1413         rcb->ti_flags = 0;
1414         if (sc->arpcom.ac_if.if_hwassist)
1415                 rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
1416                      TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
1417         rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
1418
1419         /*
1420          * Set up the mini ring. Only activated on the
1421          * Tigon 2 but the slot in the config block is
1422          * still there on the Tigon 1.
1423          */
1424         rcb = &sc->ti_rdata->ti_info.ti_mini_rx_rcb;
1425         TI_HOSTADDR(rcb->ti_hostaddr) =
1426             vtophys(&sc->ti_rdata->ti_rx_mini_ring);
1427         rcb->ti_max_len = MHLEN - ETHER_ALIGN;
1428         if (sc->ti_hwrev == TI_HWREV_TIGON)
1429                 rcb->ti_flags = TI_RCB_FLAG_RING_DISABLED;
1430         else
1431                 rcb->ti_flags = 0;
1432         if (sc->arpcom.ac_if.if_hwassist)
1433                 rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
1434                      TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
1435         rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
1436
1437         /*
1438          * Set up the receive return ring.
1439          */
1440         rcb = &sc->ti_rdata->ti_info.ti_return_rcb;
1441         TI_HOSTADDR(rcb->ti_hostaddr) =
1442             vtophys(&sc->ti_rdata->ti_rx_return_ring);
1443         rcb->ti_flags = 0;
1444         rcb->ti_max_len = TI_RETURN_RING_CNT;
1445         TI_HOSTADDR(sc->ti_rdata->ti_info.ti_return_prodidx_ptr) =
1446             vtophys(&sc->ti_return_prodidx);
1447
1448         /*
1449          * Set up the tx ring. Note: for the Tigon 2, we have the option
1450          * of putting the transmit ring in the host's address space and
1451          * letting the chip DMA it instead of leaving the ring in the NIC's
1452          * memory and accessing it through the shared memory region. We
1453          * do this for the Tigon 2, but it doesn't work on the Tigon 1,
1454          * so we have to revert to the shared memory scheme if we detect
1455          * a Tigon 1 chip.
1456          */
1457         CSR_WRITE_4(sc, TI_WINBASE, TI_TX_RING_BASE);
1458         if (sc->ti_hwrev == TI_HWREV_TIGON) {
1459                 sc->ti_rdata->ti_tx_ring_nic =
1460                     (struct ti_tx_desc *)(sc->ti_vhandle + TI_WINDOW);
1461         }
1462         bzero((char *)sc->ti_rdata->ti_tx_ring,
1463             TI_TX_RING_CNT * sizeof(struct ti_tx_desc));
1464         rcb = &sc->ti_rdata->ti_info.ti_tx_rcb;
1465         if (sc->ti_hwrev == TI_HWREV_TIGON)
1466                 rcb->ti_flags = 0;
1467         else
1468                 rcb->ti_flags = TI_RCB_FLAG_HOST_RING;
1469         rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
1470         if (sc->arpcom.ac_if.if_hwassist)
1471                 rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
1472                      TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
1473         rcb->ti_max_len = TI_TX_RING_CNT;
1474         if (sc->ti_hwrev == TI_HWREV_TIGON)
1475                 TI_HOSTADDR(rcb->ti_hostaddr) = TI_TX_RING_BASE;
1476         else
1477                 TI_HOSTADDR(rcb->ti_hostaddr) =
1478                     vtophys(&sc->ti_rdata->ti_tx_ring);
1479         TI_HOSTADDR(sc->ti_rdata->ti_info.ti_tx_considx_ptr) =
1480             vtophys(&sc->ti_tx_considx);
1481
1482         /* Set up tuneables */
1483         if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN))
1484                 CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS,
1485                     (sc->ti_rx_coal_ticks / 10));
1486         else
1487                 CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS, sc->ti_rx_coal_ticks);
1488         CSR_WRITE_4(sc, TI_GCR_TX_COAL_TICKS, sc->ti_tx_coal_ticks);
1489         CSR_WRITE_4(sc, TI_GCR_STAT_TICKS, sc->ti_stat_ticks);
1490         CSR_WRITE_4(sc, TI_GCR_RX_MAX_COAL_BD, sc->ti_rx_max_coal_bds);
1491         CSR_WRITE_4(sc, TI_GCR_TX_MAX_COAL_BD, sc->ti_tx_max_coal_bds);
1492         CSR_WRITE_4(sc, TI_GCR_TX_BUFFER_RATIO, sc->ti_tx_buf_ratio);
1493
1494         /* Turn interrupts on. */
1495         CSR_WRITE_4(sc, TI_GCR_MASK_INTRS, 0);
1496         CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
1497
1498         /* Start CPU. */
1499         TI_CLRBIT(sc, TI_CPU_STATE, (TI_CPUSTATE_HALT|TI_CPUSTATE_STEP));
1500
1501         return(0);
1502 }
1503
1504 /*
1505  * Probe for a Tigon chip. Check the PCI vendor and device IDs
1506  * against our list and return its name if we find a match.
1507  */
1508 static int ti_probe(dev)
1509         device_t                dev;
1510 {
1511         struct ti_type          *t;
1512
1513         t = ti_devs;
1514
1515         while(t->ti_name != NULL) {
1516                 if ((pci_get_vendor(dev) == t->ti_vid) &&
1517                     (pci_get_device(dev) == t->ti_did)) {
1518                         device_set_desc(dev, t->ti_name);
1519                         return(0);
1520                 }
1521                 t++;
1522         }
1523
1524         return(ENXIO);
1525 }
1526
1527 static int ti_attach(dev)
1528         device_t                dev;
1529 {
1530         int                     s;
1531         u_int32_t               command;
1532         struct ifnet            *ifp;
1533         struct ti_softc         *sc;
1534         int                     unit, error = 0, rid;
1535
1536         s = splimp();
1537
1538         sc = device_get_softc(dev);
1539         unit = device_get_unit(dev);
1540         bzero(sc, sizeof(struct ti_softc));
1541         sc->arpcom.ac_if.if_capabilities = IFCAP_HWCSUM;
1542         sc->arpcom.ac_if.if_capenable = sc->arpcom.ac_if.if_capabilities;
1543
1544         /*
1545          * Map control/status registers.
1546          */
1547         command = pci_read_config(dev, PCIR_COMMAND, 4);
1548         command |= (PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
1549         pci_write_config(dev, PCIR_COMMAND, command, 4);
1550         command = pci_read_config(dev, PCIR_COMMAND, 4);
1551
1552         if (!(command & PCIM_CMD_MEMEN)) {
1553                 printf("ti%d: failed to enable memory mapping!\n", unit);
1554                 error = ENXIO;
1555                 goto fail;
1556         }
1557
1558         rid = TI_PCI_LOMEM;
1559         sc->ti_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
1560             0, ~0, 1, RF_ACTIVE);
1561
1562         if (sc->ti_res == NULL) {
1563                 printf ("ti%d: couldn't map memory\n", unit);
1564                 error = ENXIO;
1565                 goto fail;
1566         }
1567
1568         sc->ti_btag = rman_get_bustag(sc->ti_res);
1569         sc->ti_bhandle = rman_get_bushandle(sc->ti_res);
1570         sc->ti_vhandle = (vm_offset_t)rman_get_virtual(sc->ti_res);
1571
1572         /*
1573          * XXX FIXME: rman_get_virtual() on the alpha is currently
1574          * broken and returns a physical address instead of a kernel
1575          * virtual address. Consequently, we need to do a little
1576          * extra mangling of the vhandle on the alpha. This should
1577          * eventually be fixed! The whole idea here is to get rid
1578          * of platform dependencies.
1579          */
1580 #ifdef __alpha__
1581         if (pci_cvt_to_bwx(sc->ti_vhandle))
1582                 sc->ti_vhandle = pci_cvt_to_bwx(sc->ti_vhandle);
1583         else
1584                 sc->ti_vhandle = pci_cvt_to_dense(sc->ti_vhandle);
1585         sc->ti_vhandle = ALPHA_PHYS_TO_K0SEG(sc->ti_vhandle);
1586 #endif
1587
1588         /* Allocate interrupt */
1589         rid = 0;
1590         
1591         sc->ti_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
1592             RF_SHAREABLE | RF_ACTIVE);
1593
1594         if (sc->ti_irq == NULL) {
1595                 printf("ti%d: couldn't map interrupt\n", unit);
1596                 error = ENXIO;
1597                 goto fail;
1598         }
1599
1600         error = bus_setup_intr(dev, sc->ti_irq, INTR_TYPE_NET,
1601            ti_intr, sc, &sc->ti_intrhand);
1602
1603         if (error) {
1604                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ti_irq);
1605                 bus_release_resource(dev, SYS_RES_MEMORY,
1606                     TI_PCI_LOMEM, sc->ti_res);
1607                 printf("ti%d: couldn't set up irq\n", unit);
1608                 goto fail;
1609         }
1610
1611         sc->ti_unit = unit;
1612
1613         if (ti_chipinit(sc)) {
1614                 printf("ti%d: chip initialization failed\n", sc->ti_unit);
1615                 bus_teardown_intr(dev, sc->ti_irq, sc->ti_intrhand);
1616                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ti_irq);
1617                 bus_release_resource(dev, SYS_RES_MEMORY,
1618                     TI_PCI_LOMEM, sc->ti_res);
1619                 error = ENXIO;
1620                 goto fail;
1621         }
1622
1623         /* Zero out the NIC's on-board SRAM. */
1624         ti_mem(sc, 0x2000, 0x100000 - 0x2000,  NULL);
1625
1626         /* Init again -- zeroing memory may have clobbered some registers. */
1627         if (ti_chipinit(sc)) {
1628                 printf("ti%d: chip initialization failed\n", sc->ti_unit);
1629                 bus_teardown_intr(dev, sc->ti_irq, sc->ti_intrhand);
1630                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ti_irq);
1631                 bus_release_resource(dev, SYS_RES_MEMORY,
1632                     TI_PCI_LOMEM, sc->ti_res);
1633                 error = ENXIO;
1634                 goto fail;
1635         }
1636
1637         /*
1638          * Get station address from the EEPROM. Note: the manual states
1639          * that the MAC address is at offset 0x8c, however the data is
1640          * stored as two longwords (since that's how it's loaded into
1641          * the NIC). This means the MAC address is actually preceeded
1642          * by two zero bytes. We need to skip over those.
1643          */
1644         if (ti_read_eeprom(sc, (caddr_t)&sc->arpcom.ac_enaddr,
1645                                 TI_EE_MAC_OFFSET + 2, ETHER_ADDR_LEN)) {
1646                 printf("ti%d: failed to read station address\n", unit);
1647                 bus_teardown_intr(dev, sc->ti_irq, sc->ti_intrhand);
1648                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ti_irq);
1649                 bus_release_resource(dev, SYS_RES_MEMORY,
1650                     TI_PCI_LOMEM, sc->ti_res);
1651                 error = ENXIO;
1652                 goto fail;
1653         }
1654
1655         /* Allocate the general information block and ring buffers. */
1656         sc->ti_rdata = contigmalloc(sizeof(struct ti_ring_data), M_DEVBUF,
1657             M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
1658
1659         if (sc->ti_rdata == NULL) {
1660                 bus_teardown_intr(dev, sc->ti_irq, sc->ti_intrhand);
1661                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ti_irq);
1662                 bus_release_resource(dev, SYS_RES_MEMORY,
1663                     TI_PCI_LOMEM, sc->ti_res);
1664                 error = ENXIO;
1665                 printf("ti%d: no memory for list buffers!\n", sc->ti_unit);
1666                 goto fail;
1667         }
1668
1669         bzero(sc->ti_rdata, sizeof(struct ti_ring_data));
1670
1671         /* Try to allocate memory for jumbo buffers. */
1672         if (ti_alloc_jumbo_mem(sc)) {
1673                 printf("ti%d: jumbo buffer allocation failed\n", sc->ti_unit);
1674                 bus_teardown_intr(dev, sc->ti_irq, sc->ti_intrhand);
1675                 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ti_irq);
1676                 bus_release_resource(dev, SYS_RES_MEMORY,
1677                     TI_PCI_LOMEM, sc->ti_res);
1678                 contigfree(sc->ti_rdata, sizeof(struct ti_ring_data),
1679                     M_DEVBUF);
1680                 error = ENXIO;
1681                 goto fail;
1682         }
1683
1684         /*
1685          * We really need a better way to tell a 1000baseTX card
1686          * from a 1000baseSX one, since in theory there could be
1687          * OEMed 1000baseTX cards from lame vendors who aren't
1688          * clever enough to change the PCI ID. For the moment
1689          * though, the AceNIC is the only copper card available.
1690          */
1691         if (pci_get_vendor(dev) == ALT_VENDORID &&
1692             pci_get_device(dev) == ALT_DEVICEID_ACENIC_COPPER)
1693                 sc->ti_copper = 1;
1694         /* Ok, it's not the only copper card available. */
1695         if (pci_get_vendor(dev) == NG_VENDORID &&
1696             pci_get_device(dev) == NG_DEVICEID_GA620T)
1697                 sc->ti_copper = 1;
1698
1699         /* Set default tuneable values. */
1700         sc->ti_stat_ticks = 2 * TI_TICKS_PER_SEC;
1701         sc->ti_rx_coal_ticks = TI_TICKS_PER_SEC / 5000;
1702         sc->ti_tx_coal_ticks = TI_TICKS_PER_SEC / 500;
1703         sc->ti_rx_max_coal_bds = 64;
1704         sc->ti_tx_max_coal_bds = 128;
1705         sc->ti_tx_buf_ratio = 21;
1706
1707         /* Set up ifnet structure */
1708         ifp = &sc->arpcom.ac_if;
1709         ifp->if_softc = sc;
1710         if_initname(ifp, "ti", sc->ti_unit);
1711         ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1712         ifp->if_ioctl = ti_ioctl;
1713         ifp->if_start = ti_start;
1714         ifp->if_watchdog = ti_watchdog;
1715         ifp->if_init = ti_init;
1716         ifp->if_mtu = ETHERMTU;
1717         ifp->if_snd.ifq_maxlen = TI_TX_RING_CNT - 1;
1718
1719         /* Set up ifmedia support. */
1720         ifmedia_init(&sc->ifmedia, IFM_IMASK, ti_ifmedia_upd, ti_ifmedia_sts);
1721         if (sc->ti_copper) {
1722                 /*
1723                  * Copper cards allow manual 10/100 mode selection,
1724                  * but not manual 1000baseTX mode selection. Why?
1725                  * Becuase currently there's no way to specify the
1726                  * master/slave setting through the firmware interface,
1727                  * so Alteon decided to just bag it and handle it
1728                  * via autonegotiation.
1729                  */
1730                 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
1731                 ifmedia_add(&sc->ifmedia,
1732                     IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
1733                 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL);
1734                 ifmedia_add(&sc->ifmedia,
1735                     IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
1736                 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_1000_TX, 0, NULL);
1737                 ifmedia_add(&sc->ifmedia,
1738                     IFM_ETHER|IFM_1000_TX|IFM_FDX, 0, NULL);
1739         } else {
1740                 /* Fiber cards don't support 10/100 modes. */
1741                 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_1000_SX, 0, NULL);
1742                 ifmedia_add(&sc->ifmedia,
1743                     IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL);
1744         }
1745         ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
1746         ifmedia_set(&sc->ifmedia, IFM_ETHER|IFM_AUTO);
1747
1748         /*
1749          * Call MI attach routine.
1750          */
1751         ether_ifattach(ifp, sc->arpcom.ac_enaddr);
1752
1753 fail:
1754         splx(s);
1755
1756         return(error);
1757 }
1758
1759 static int ti_detach(dev)
1760         device_t                dev;
1761 {
1762         struct ti_softc         *sc;
1763         struct ifnet            *ifp;
1764         int                     s;
1765
1766         s = splimp();
1767
1768         sc = device_get_softc(dev);
1769         ifp = &sc->arpcom.ac_if;
1770
1771         ether_ifdetach(ifp);
1772         ti_stop(sc);
1773
1774         bus_teardown_intr(dev, sc->ti_irq, sc->ti_intrhand);
1775         bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ti_irq);
1776         bus_release_resource(dev, SYS_RES_MEMORY, TI_PCI_LOMEM, sc->ti_res);
1777
1778         contigfree(sc->ti_cdata.ti_jumbo_buf, TI_JMEM, M_DEVBUF);
1779         contigfree(sc->ti_rdata, sizeof(struct ti_ring_data), M_DEVBUF);
1780         ifmedia_removeall(&sc->ifmedia);
1781
1782         splx(s);
1783
1784         return(0);
1785 }
1786
1787 /*
1788  * Frame reception handling. This is called if there's a frame
1789  * on the receive return list.
1790  *
1791  * Note: we have to be able to handle three possibilities here:
1792  * 1) the frame is from the mini receive ring (can only happen)
1793  *    on Tigon 2 boards)
1794  * 2) the frame is from the jumbo recieve ring
1795  * 3) the frame is from the standard receive ring
1796  */
1797
1798 static void ti_rxeof(sc)
1799         struct ti_softc         *sc;
1800 {
1801         struct ifnet            *ifp;
1802         struct ti_cmd_desc      cmd;
1803
1804         ifp = &sc->arpcom.ac_if;
1805
1806         while(sc->ti_rx_saved_considx != sc->ti_return_prodidx.ti_idx) {
1807                 struct ti_rx_desc       *cur_rx;
1808                 u_int32_t               rxidx;
1809                 struct mbuf             *m = NULL;
1810                 u_int16_t               vlan_tag = 0;
1811                 int                     have_tag = 0;
1812
1813                 cur_rx =
1814                     &sc->ti_rdata->ti_rx_return_ring[sc->ti_rx_saved_considx];
1815                 rxidx = cur_rx->ti_idx;
1816                 TI_INC(sc->ti_rx_saved_considx, TI_RETURN_RING_CNT);
1817
1818                 if (cur_rx->ti_flags & TI_BDFLAG_VLAN_TAG) {
1819                         have_tag = 1;
1820                         vlan_tag = cur_rx->ti_vlan_tag & 0xfff;
1821                 }
1822
1823                 if (cur_rx->ti_flags & TI_BDFLAG_JUMBO_RING) {
1824                         TI_INC(sc->ti_jumbo, TI_JUMBO_RX_RING_CNT);
1825                         m = sc->ti_cdata.ti_rx_jumbo_chain[rxidx];
1826                         sc->ti_cdata.ti_rx_jumbo_chain[rxidx] = NULL;
1827                         if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
1828                                 ifp->if_ierrors++;
1829                                 ti_newbuf_jumbo(sc, sc->ti_jumbo, m);
1830                                 continue;
1831                         }
1832                         if (ti_newbuf_jumbo(sc, sc->ti_jumbo, NULL) == ENOBUFS) {
1833                                 ifp->if_ierrors++;
1834                                 ti_newbuf_jumbo(sc, sc->ti_jumbo, m);
1835                                 continue;
1836                         }
1837                 } else if (cur_rx->ti_flags & TI_BDFLAG_MINI_RING) {
1838                         TI_INC(sc->ti_mini, TI_MINI_RX_RING_CNT);
1839                         m = sc->ti_cdata.ti_rx_mini_chain[rxidx];
1840                         sc->ti_cdata.ti_rx_mini_chain[rxidx] = NULL;
1841                         if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
1842                                 ifp->if_ierrors++;
1843                                 ti_newbuf_mini(sc, sc->ti_mini, m);
1844                                 continue;
1845                         }
1846                         if (ti_newbuf_mini(sc, sc->ti_mini, NULL) == ENOBUFS) {
1847                                 ifp->if_ierrors++;
1848                                 ti_newbuf_mini(sc, sc->ti_mini, m);
1849                                 continue;
1850                         }
1851                 } else {
1852                         TI_INC(sc->ti_std, TI_STD_RX_RING_CNT);
1853                         m = sc->ti_cdata.ti_rx_std_chain[rxidx];
1854                         sc->ti_cdata.ti_rx_std_chain[rxidx] = NULL;
1855                         if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
1856                                 ifp->if_ierrors++;
1857                                 ti_newbuf_std(sc, sc->ti_std, m);
1858                                 continue;
1859                         }
1860                         if (ti_newbuf_std(sc, sc->ti_std, NULL) == ENOBUFS) {
1861                                 ifp->if_ierrors++;
1862                                 ti_newbuf_std(sc, sc->ti_std, m);
1863                                 continue;
1864                         }
1865                 }
1866
1867                 m->m_pkthdr.len = m->m_len = cur_rx->ti_len;
1868                 ifp->if_ipackets++;
1869                 m->m_pkthdr.rcvif = ifp;
1870
1871                 if (ifp->if_hwassist) {
1872                         m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED |
1873                             CSUM_DATA_VALID;
1874                         if ((cur_rx->ti_ip_cksum ^ 0xffff) == 0)
1875                                 m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
1876                         m->m_pkthdr.csum_data = cur_rx->ti_tcp_udp_cksum;
1877                 }
1878
1879                 /*
1880                  * If we received a packet with a vlan tag, pass it
1881                  * to vlan_input() instead of ether_input().
1882                  */
1883                 if (have_tag) {
1884                         VLAN_INPUT_TAG(m, vlan_tag);
1885                         have_tag = vlan_tag = 0;
1886                 } else {
1887                         (*ifp->if_input)(ifp, m);
1888                 }
1889         }
1890
1891         /* Only necessary on the Tigon 1. */
1892         if (sc->ti_hwrev == TI_HWREV_TIGON)
1893                 CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX,
1894                     sc->ti_rx_saved_considx);
1895
1896         TI_UPDATE_STDPROD(sc, sc->ti_std);
1897         TI_UPDATE_MINIPROD(sc, sc->ti_mini);
1898         TI_UPDATE_JUMBOPROD(sc, sc->ti_jumbo);
1899
1900         return;
1901 }
1902
1903 static void ti_txeof(sc)
1904         struct ti_softc         *sc;
1905 {
1906         struct ti_tx_desc       *cur_tx = NULL;
1907         struct ifnet            *ifp;
1908
1909         ifp = &sc->arpcom.ac_if;
1910
1911         /*
1912          * Go through our tx ring and free mbufs for those
1913          * frames that have been sent.
1914          */
1915         while (sc->ti_tx_saved_considx != sc->ti_tx_considx.ti_idx) {
1916                 u_int32_t               idx = 0;
1917
1918                 idx = sc->ti_tx_saved_considx;
1919                 if (sc->ti_hwrev == TI_HWREV_TIGON) {
1920                         if (idx > 383)
1921                                 CSR_WRITE_4(sc, TI_WINBASE,
1922                                     TI_TX_RING_BASE + 6144);
1923                         else if (idx > 255)
1924                                 CSR_WRITE_4(sc, TI_WINBASE,
1925                                     TI_TX_RING_BASE + 4096);
1926                         else if (idx > 127)
1927                                 CSR_WRITE_4(sc, TI_WINBASE,
1928                                     TI_TX_RING_BASE + 2048);
1929                         else
1930                                 CSR_WRITE_4(sc, TI_WINBASE,
1931                                     TI_TX_RING_BASE);
1932                         cur_tx = &sc->ti_rdata->ti_tx_ring_nic[idx % 128];
1933                 } else
1934                         cur_tx = &sc->ti_rdata->ti_tx_ring[idx];
1935                 if (cur_tx->ti_flags & TI_BDFLAG_END)
1936                         ifp->if_opackets++;
1937                 if (sc->ti_cdata.ti_tx_chain[idx] != NULL) {
1938                         m_freem(sc->ti_cdata.ti_tx_chain[idx]);
1939                         sc->ti_cdata.ti_tx_chain[idx] = NULL;
1940                 }
1941                 sc->ti_txcnt--;
1942                 TI_INC(sc->ti_tx_saved_considx, TI_TX_RING_CNT);
1943                 ifp->if_timer = 0;
1944         }
1945
1946         if (cur_tx != NULL)
1947                 ifp->if_flags &= ~IFF_OACTIVE;
1948
1949         return;
1950 }
1951
1952 static void ti_intr(xsc)
1953         void                    *xsc;
1954 {
1955         struct ti_softc         *sc;
1956         struct ifnet            *ifp;
1957
1958         sc = xsc;
1959         ifp = &sc->arpcom.ac_if;
1960
1961 #ifdef notdef
1962         /* Avoid this for now -- checking this register is expensive. */
1963         /* Make sure this is really our interrupt. */
1964         if (!(CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_INTSTATE))
1965                 return;
1966 #endif
1967
1968         /* Ack interrupt and stop others from occuring. */
1969         CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
1970
1971         if (ifp->if_flags & IFF_RUNNING) {
1972                 /* Check RX return ring producer/consumer */
1973                 ti_rxeof(sc);
1974
1975                 /* Check TX ring producer/consumer */
1976                 ti_txeof(sc);
1977         }
1978
1979         ti_handle_events(sc);
1980
1981         /* Re-enable interrupts. */
1982         CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
1983
1984         if (ifp->if_flags & IFF_RUNNING && ifp->if_snd.ifq_head != NULL)
1985                 ti_start(ifp);
1986
1987         return;
1988 }
1989
1990 static void ti_stats_update(sc)
1991         struct ti_softc         *sc;
1992 {
1993         struct ifnet            *ifp;
1994
1995         ifp = &sc->arpcom.ac_if;
1996
1997         ifp->if_collisions +=
1998            (sc->ti_rdata->ti_info.ti_stats.dot3StatsSingleCollisionFrames +
1999            sc->ti_rdata->ti_info.ti_stats.dot3StatsMultipleCollisionFrames +
2000            sc->ti_rdata->ti_info.ti_stats.dot3StatsExcessiveCollisions +
2001            sc->ti_rdata->ti_info.ti_stats.dot3StatsLateCollisions) -
2002            ifp->if_collisions;
2003
2004         return;
2005 }
2006
2007 /*
2008  * Encapsulate an mbuf chain in the tx ring  by coupling the mbuf data
2009  * pointers to descriptors.
2010  */
2011 static int ti_encap(sc, m_head, txidx)
2012         struct ti_softc         *sc;
2013         struct mbuf             *m_head;
2014         u_int32_t               *txidx;
2015 {
2016         struct ti_tx_desc       *f = NULL;
2017         struct mbuf             *m;
2018         u_int32_t               frag, cur, cnt = 0;
2019         u_int16_t               csum_flags = 0;
2020         struct ifvlan           *ifv = NULL;
2021
2022         if ((m_head->m_flags & (M_PROTO1|M_PKTHDR)) == (M_PROTO1|M_PKTHDR) &&
2023             m_head->m_pkthdr.rcvif != NULL &&
2024             m_head->m_pkthdr.rcvif->if_type == IFT_L2VLAN)
2025                 ifv = m_head->m_pkthdr.rcvif->if_softc;
2026
2027         m = m_head;
2028         cur = frag = *txidx;
2029
2030         if (m_head->m_pkthdr.csum_flags) {
2031                 if (m_head->m_pkthdr.csum_flags & CSUM_IP)
2032                         csum_flags |= TI_BDFLAG_IP_CKSUM;
2033                 if (m_head->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP))
2034                         csum_flags |= TI_BDFLAG_TCP_UDP_CKSUM;
2035                 if (m_head->m_flags & M_LASTFRAG)
2036                         csum_flags |= TI_BDFLAG_IP_FRAG_END;
2037                 else if (m_head->m_flags & M_FRAG)
2038                         csum_flags |= TI_BDFLAG_IP_FRAG;
2039         }
2040         /*
2041          * Start packing the mbufs in this chain into
2042          * the fragment pointers. Stop when we run out
2043          * of fragments or hit the end of the mbuf chain.
2044          */
2045         for (m = m_head; m != NULL; m = m->m_next) {
2046                 if (m->m_len != 0) {
2047                         if (sc->ti_hwrev == TI_HWREV_TIGON) {
2048                                 if (frag > 383)
2049                                         CSR_WRITE_4(sc, TI_WINBASE,
2050                                             TI_TX_RING_BASE + 6144);
2051                                 else if (frag > 255)
2052                                         CSR_WRITE_4(sc, TI_WINBASE,
2053                                             TI_TX_RING_BASE + 4096);
2054                                 else if (frag > 127)
2055                                         CSR_WRITE_4(sc, TI_WINBASE,
2056                                             TI_TX_RING_BASE + 2048);
2057                                 else
2058                                         CSR_WRITE_4(sc, TI_WINBASE,
2059                                             TI_TX_RING_BASE);
2060                                 f = &sc->ti_rdata->ti_tx_ring_nic[frag % 128];
2061                         } else
2062                                 f = &sc->ti_rdata->ti_tx_ring[frag];
2063                         if (sc->ti_cdata.ti_tx_chain[frag] != NULL)
2064                                 break;
2065                         TI_HOSTADDR(f->ti_addr) = vtophys(mtod(m, vm_offset_t));
2066                         f->ti_len = m->m_len;
2067                         f->ti_flags = csum_flags;
2068
2069                         if (ifv != NULL) {
2070                                 f->ti_flags |= TI_BDFLAG_VLAN_TAG;
2071                                 f->ti_vlan_tag = ifv->ifv_tag & 0xfff;
2072                         } else {
2073                                 f->ti_vlan_tag = 0;
2074                         }
2075
2076                         /*
2077                          * Sanity check: avoid coming within 16 descriptors
2078                          * of the end of the ring.
2079                          */
2080                         if ((TI_TX_RING_CNT - (sc->ti_txcnt + cnt)) < 16)
2081                                 return(ENOBUFS);
2082                         cur = frag;
2083                         TI_INC(frag, TI_TX_RING_CNT);
2084                         cnt++;
2085                 }
2086         }
2087
2088         if (m != NULL)
2089                 return(ENOBUFS);
2090
2091         if (frag == sc->ti_tx_saved_considx)
2092                 return(ENOBUFS);
2093
2094         if (sc->ti_hwrev == TI_HWREV_TIGON)
2095                 sc->ti_rdata->ti_tx_ring_nic[cur % 128].ti_flags |=
2096                     TI_BDFLAG_END;
2097         else
2098                 sc->ti_rdata->ti_tx_ring[cur].ti_flags |= TI_BDFLAG_END;
2099         sc->ti_cdata.ti_tx_chain[cur] = m_head;
2100         sc->ti_txcnt += cnt;
2101
2102         *txidx = frag;
2103
2104         return(0);
2105 }
2106
2107 /*
2108  * Main transmit routine. To avoid having to do mbuf copies, we put pointers
2109  * to the mbuf data regions directly in the transmit descriptors.
2110  */
2111 static void ti_start(ifp)
2112         struct ifnet            *ifp;
2113 {
2114         struct ti_softc         *sc;
2115         struct mbuf             *m_head = NULL;
2116         u_int32_t               prodidx = 0;
2117
2118         sc = ifp->if_softc;
2119
2120         prodidx = CSR_READ_4(sc, TI_MB_SENDPROD_IDX);
2121
2122         while(sc->ti_cdata.ti_tx_chain[prodidx] == NULL) {
2123                 IF_DEQUEUE(&ifp->if_snd, m_head);
2124                 if (m_head == NULL)
2125                         break;
2126
2127                 /*
2128                  * XXX
2129                  * safety overkill.  If this is a fragmented packet chain
2130                  * with delayed TCP/UDP checksums, then only encapsulate
2131                  * it if we have enough descriptors to handle the entire
2132                  * chain at once.
2133                  * (paranoia -- may not actually be needed)
2134                  */
2135                 if (m_head->m_flags & M_FIRSTFRAG &&
2136                     m_head->m_pkthdr.csum_flags & (CSUM_DELAY_DATA)) {
2137                         if ((TI_TX_RING_CNT - sc->ti_txcnt) <
2138                             m_head->m_pkthdr.csum_data + 16) {
2139                                 IF_PREPEND(&ifp->if_snd, m_head);
2140                                 ifp->if_flags |= IFF_OACTIVE;
2141                                 break;
2142                         }
2143                 }
2144
2145                 /*
2146                  * Pack the data into the transmit ring. If we
2147                  * don't have room, set the OACTIVE flag and wait
2148                  * for the NIC to drain the ring.
2149                  */
2150                 if (ti_encap(sc, m_head, &prodidx)) {
2151                         IF_PREPEND(&ifp->if_snd, m_head);
2152                         ifp->if_flags |= IFF_OACTIVE;
2153                         break;
2154                 }
2155
2156                 /*
2157                  * If there's a BPF listener, bounce a copy of this frame
2158                  * to him.
2159                  */
2160                 if (ifp->if_bpf)
2161                         bpf_mtap(ifp, m_head);
2162         }
2163
2164         /* Transmit */
2165         CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, prodidx);
2166
2167         /*
2168          * Set a timeout in case the chip goes out to lunch.
2169          */
2170         ifp->if_timer = 5;
2171
2172         return;
2173 }
2174
2175 static void ti_init(xsc)
2176         void                    *xsc;
2177 {
2178         struct ti_softc         *sc = xsc;
2179         int                     s;
2180
2181         s = splimp();
2182
2183         /* Cancel pending I/O and flush buffers. */
2184         ti_stop(sc);
2185
2186         /* Init the gen info block, ring control blocks and firmware. */
2187         if (ti_gibinit(sc)) {
2188                 printf("ti%d: initialization failure\n", sc->ti_unit);
2189                 splx(s);
2190                 return;
2191         }
2192
2193         splx(s);
2194
2195         return;
2196 }
2197
2198 static void ti_init2(sc)
2199         struct ti_softc         *sc;
2200 {
2201         struct ti_cmd_desc      cmd;
2202         struct ifnet            *ifp;
2203         u_int16_t               *m;
2204         struct ifmedia          *ifm;
2205         int                     tmp;
2206
2207         ifp = &sc->arpcom.ac_if;
2208
2209         /* Specify MTU and interface index. */
2210         CSR_WRITE_4(sc, TI_GCR_IFINDEX, ifp->if_dunit);
2211         CSR_WRITE_4(sc, TI_GCR_IFMTU, ifp->if_mtu +
2212             ETHER_HDR_LEN + ETHER_CRC_LEN);
2213         TI_DO_CMD(TI_CMD_UPDATE_GENCOM, 0, 0);
2214
2215         /* Load our MAC address. */
2216         m = (u_int16_t *)&sc->arpcom.ac_enaddr[0];
2217         CSR_WRITE_4(sc, TI_GCR_PAR0, htons(m[0]));
2218         CSR_WRITE_4(sc, TI_GCR_PAR1, (htons(m[1]) << 16) | htons(m[2]));
2219         TI_DO_CMD(TI_CMD_SET_MAC_ADDR, 0, 0);
2220
2221         /* Enable or disable promiscuous mode as needed. */
2222         if (ifp->if_flags & IFF_PROMISC) {
2223                 TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_ENB, 0);
2224         } else {
2225                 TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_DIS, 0);
2226         }
2227
2228         /* Program multicast filter. */
2229         ti_setmulti(sc);
2230
2231         /*
2232          * If this is a Tigon 1, we should tell the
2233          * firmware to use software packet filtering.
2234          */
2235         if (sc->ti_hwrev == TI_HWREV_TIGON) {
2236                 TI_DO_CMD(TI_CMD_FDR_FILTERING, TI_CMD_CODE_FILT_ENB, 0);
2237         }
2238
2239         /* Init RX ring. */
2240         ti_init_rx_ring_std(sc);
2241
2242         /* Init jumbo RX ring. */
2243         if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN))
2244                 ti_init_rx_ring_jumbo(sc);
2245
2246         /*
2247          * If this is a Tigon 2, we can also configure the
2248          * mini ring.
2249          */
2250         if (sc->ti_hwrev == TI_HWREV_TIGON_II)
2251                 ti_init_rx_ring_mini(sc);
2252
2253         CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX, 0);
2254         sc->ti_rx_saved_considx = 0;
2255
2256         /* Init TX ring. */
2257         ti_init_tx_ring(sc);
2258
2259         /* Tell firmware we're alive. */
2260         TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_UP, 0);
2261
2262         /* Enable host interrupts. */
2263         CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
2264
2265         ifp->if_flags |= IFF_RUNNING;
2266         ifp->if_flags &= ~IFF_OACTIVE;
2267
2268         /*
2269          * Make sure to set media properly. We have to do this
2270          * here since we have to issue commands in order to set
2271          * the link negotiation and we can't issue commands until
2272          * the firmware is running.
2273          */
2274         ifm = &sc->ifmedia;
2275         tmp = ifm->ifm_media;
2276         ifm->ifm_media = ifm->ifm_cur->ifm_media;
2277         ti_ifmedia_upd(ifp);
2278         ifm->ifm_media = tmp;
2279
2280         return;
2281 }
2282
2283 /*
2284  * Set media options.
2285  */
2286 static int ti_ifmedia_upd(ifp)
2287         struct ifnet            *ifp;
2288 {
2289         struct ti_softc         *sc;
2290         struct ifmedia          *ifm;
2291         struct ti_cmd_desc      cmd;
2292
2293         sc = ifp->if_softc;
2294         ifm = &sc->ifmedia;
2295
2296         if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
2297                 return(EINVAL);
2298
2299         switch(IFM_SUBTYPE(ifm->ifm_media)) {
2300         case IFM_AUTO:
2301                 CSR_WRITE_4(sc, TI_GCR_GLINK, TI_GLNK_PREF|TI_GLNK_1000MB|
2302                     TI_GLNK_FULL_DUPLEX|TI_GLNK_RX_FLOWCTL_Y|
2303                     TI_GLNK_AUTONEGENB|TI_GLNK_ENB);
2304                 CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_100MB|TI_LNK_10MB|
2305                     TI_LNK_FULL_DUPLEX|TI_LNK_HALF_DUPLEX|
2306                     TI_LNK_AUTONEGENB|TI_LNK_ENB);
2307                 TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
2308                     TI_CMD_CODE_NEGOTIATE_BOTH, 0);
2309                 break;
2310         case IFM_1000_SX:
2311         case IFM_1000_TX:
2312                 CSR_WRITE_4(sc, TI_GCR_GLINK, TI_GLNK_PREF|TI_GLNK_1000MB|
2313                     TI_GLNK_RX_FLOWCTL_Y|TI_GLNK_ENB);
2314                 CSR_WRITE_4(sc, TI_GCR_LINK, 0);
2315                 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
2316                         TI_SETBIT(sc, TI_GCR_GLINK, TI_GLNK_FULL_DUPLEX);
2317                 }
2318                 TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
2319                     TI_CMD_CODE_NEGOTIATE_GIGABIT, 0);
2320                 break;
2321         case IFM_100_FX:
2322         case IFM_10_FL:
2323         case IFM_100_TX:
2324         case IFM_10_T:
2325                 CSR_WRITE_4(sc, TI_GCR_GLINK, 0);
2326                 CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_ENB|TI_LNK_PREF);
2327                 if (IFM_SUBTYPE(ifm->ifm_media) == IFM_100_FX ||
2328                     IFM_SUBTYPE(ifm->ifm_media) == IFM_100_TX) {
2329                         TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_100MB);
2330                 } else {
2331                         TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_10MB);
2332                 }
2333                 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
2334                         TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_FULL_DUPLEX);
2335                 } else {
2336                         TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_HALF_DUPLEX);
2337                 }
2338                 TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
2339                     TI_CMD_CODE_NEGOTIATE_10_100, 0);
2340                 break;
2341         }
2342
2343         return(0);
2344 }
2345
2346 /*
2347  * Report current media status.
2348  */
2349 static void ti_ifmedia_sts(ifp, ifmr)
2350         struct ifnet            *ifp;
2351         struct ifmediareq       *ifmr;
2352 {
2353         struct ti_softc         *sc;
2354         u_int32_t               media = 0;
2355
2356         sc = ifp->if_softc;
2357
2358         ifmr->ifm_status = IFM_AVALID;
2359         ifmr->ifm_active = IFM_ETHER;
2360
2361         if (sc->ti_linkstat == TI_EV_CODE_LINK_DOWN)
2362                 return;
2363
2364         ifmr->ifm_status |= IFM_ACTIVE;
2365
2366         if (sc->ti_linkstat == TI_EV_CODE_GIG_LINK_UP) {
2367                 media = CSR_READ_4(sc, TI_GCR_GLINK_STAT);
2368                 if (sc->ti_copper)
2369                         ifmr->ifm_active |= IFM_1000_TX;
2370                 else
2371                         ifmr->ifm_active |= IFM_1000_SX;
2372                 if (media & TI_GLNK_FULL_DUPLEX)
2373                         ifmr->ifm_active |= IFM_FDX;
2374                 else
2375                         ifmr->ifm_active |= IFM_HDX;
2376         } else if (sc->ti_linkstat == TI_EV_CODE_LINK_UP) {
2377                 media = CSR_READ_4(sc, TI_GCR_LINK_STAT);
2378                 if (sc->ti_copper) {
2379                         if (media & TI_LNK_100MB)
2380                                 ifmr->ifm_active |= IFM_100_TX;
2381                         if (media & TI_LNK_10MB)
2382                                 ifmr->ifm_active |= IFM_10_T;
2383                 } else {
2384                         if (media & TI_LNK_100MB)
2385                                 ifmr->ifm_active |= IFM_100_FX;
2386                         if (media & TI_LNK_10MB)
2387                                 ifmr->ifm_active |= IFM_10_FL;
2388                 }
2389                 if (media & TI_LNK_FULL_DUPLEX)
2390                         ifmr->ifm_active |= IFM_FDX;
2391                 if (media & TI_LNK_HALF_DUPLEX)
2392                         ifmr->ifm_active |= IFM_HDX;
2393         }
2394         
2395         return;
2396 }
2397
2398 static int ti_ioctl(ifp, command, data, cr)
2399         struct ifnet            *ifp;
2400         u_long                  command;
2401         caddr_t                 data;
2402         struct ucred            *cr;
2403 {
2404         struct ti_softc         *sc = ifp->if_softc;
2405         struct ifreq            *ifr = (struct ifreq *) data;
2406         int                     s, mask, error = 0;
2407         struct ti_cmd_desc      cmd;
2408
2409         s = splimp();
2410
2411         switch(command) {
2412         case SIOCSIFADDR:
2413         case SIOCGIFADDR:
2414                 error = ether_ioctl(ifp, command, data);
2415                 break;
2416         case SIOCSIFMTU:
2417                 if (ifr->ifr_mtu > TI_JUMBO_MTU)
2418                         error = EINVAL;
2419                 else {
2420                         ifp->if_mtu = ifr->ifr_mtu;
2421                         ti_init(sc);
2422                 }
2423                 break;
2424         case SIOCSIFFLAGS:
2425                 if (ifp->if_flags & IFF_UP) {
2426                         /*
2427                          * If only the state of the PROMISC flag changed,
2428                          * then just use the 'set promisc mode' command
2429                          * instead of reinitializing the entire NIC. Doing
2430                          * a full re-init means reloading the firmware and
2431                          * waiting for it to start up, which may take a
2432                          * second or two.
2433                          */
2434                         if (ifp->if_flags & IFF_RUNNING &&
2435                             ifp->if_flags & IFF_PROMISC &&
2436                             !(sc->ti_if_flags & IFF_PROMISC)) {
2437                                 TI_DO_CMD(TI_CMD_SET_PROMISC_MODE,
2438                                     TI_CMD_CODE_PROMISC_ENB, 0);
2439                         } else if (ifp->if_flags & IFF_RUNNING &&
2440                             !(ifp->if_flags & IFF_PROMISC) &&
2441                             sc->ti_if_flags & IFF_PROMISC) {
2442                                 TI_DO_CMD(TI_CMD_SET_PROMISC_MODE,
2443                                     TI_CMD_CODE_PROMISC_DIS, 0);
2444                         } else
2445                                 ti_init(sc);
2446                 } else {
2447                         if (ifp->if_flags & IFF_RUNNING) {
2448                                 ti_stop(sc);
2449                         }
2450                 }
2451                 sc->ti_if_flags = ifp->if_flags;
2452                 error = 0;
2453                 break;
2454         case SIOCADDMULTI:
2455         case SIOCDELMULTI:
2456                 if (ifp->if_flags & IFF_RUNNING) {
2457                         ti_setmulti(sc);
2458                         error = 0;
2459                 }
2460                 break;
2461         case SIOCSIFMEDIA:
2462         case SIOCGIFMEDIA:
2463                 error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command);
2464                 break;
2465         case SIOCSIFCAP:
2466                 mask = ifr->ifr_reqcap ^ ifp->if_capenable;
2467                 if (mask & IFCAP_HWCSUM) {
2468                         if (IFCAP_HWCSUM & ifp->if_capenable)
2469                                 ifp->if_capenable &= ~IFCAP_HWCSUM;
2470                         else
2471                                 ifp->if_capenable |= IFCAP_HWCSUM;
2472                         if (ifp->if_flags & IFF_RUNNING)
2473                                 ti_init(sc);
2474                 }
2475                 error = 0;
2476                 break;
2477         default:
2478                 error = EINVAL;
2479                 break;
2480         }
2481
2482         (void)splx(s);
2483
2484         return(error);
2485 }
2486
2487 static void ti_watchdog(ifp)
2488         struct ifnet            *ifp;
2489 {
2490         struct ti_softc         *sc;
2491
2492         sc = ifp->if_softc;
2493
2494         printf("ti%d: watchdog timeout -- resetting\n", sc->ti_unit);
2495         ti_stop(sc);
2496         ti_init(sc);
2497
2498         ifp->if_oerrors++;
2499
2500         return;
2501 }
2502
2503 /*
2504  * Stop the adapter and free any mbufs allocated to the
2505  * RX and TX lists.
2506  */
2507 static void ti_stop(sc)
2508         struct ti_softc         *sc;
2509 {
2510         struct ifnet            *ifp;
2511         struct ti_cmd_desc      cmd;
2512
2513         ifp = &sc->arpcom.ac_if;
2514
2515         /* Disable host interrupts. */
2516         CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
2517         /*
2518          * Tell firmware we're shutting down.
2519          */
2520         TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_DOWN, 0);
2521
2522         /* Halt and reinitialize. */
2523         ti_chipinit(sc);
2524         ti_mem(sc, 0x2000, 0x100000 - 0x2000, NULL);
2525         ti_chipinit(sc);
2526
2527         /* Free the RX lists. */
2528         ti_free_rx_ring_std(sc);
2529
2530         /* Free jumbo RX list. */
2531         ti_free_rx_ring_jumbo(sc);
2532
2533         /* Free mini RX list. */
2534         ti_free_rx_ring_mini(sc);
2535
2536         /* Free TX buffers. */
2537         ti_free_tx_ring(sc);
2538
2539         sc->ti_ev_prodidx.ti_idx = 0;
2540         sc->ti_return_prodidx.ti_idx = 0;
2541         sc->ti_tx_considx.ti_idx = 0;
2542         sc->ti_tx_saved_considx = TI_TXCONS_UNSET;
2543
2544         ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
2545
2546         return;
2547 }
2548
2549 /*
2550  * Stop all chip I/O so that the kernel's probe routines don't
2551  * get confused by errant DMAs when rebooting.
2552  */
2553 static void ti_shutdown(dev)
2554         device_t                dev;
2555 {
2556         struct ti_softc         *sc;
2557
2558         sc = device_get_softc(dev);
2559
2560         ti_chipinit(sc);
2561
2562         return;
2563 }