2 # JG64 -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
7 # $DragonFly: src/sys/config/JG64,v 1.1 2008/08/29 22:14:18 dillon Exp $
16 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
18 ##options MATH_EMULATE #Support for x87 emulation
19 options INET #InterNETworking
20 options INET6 #IPv6 communications protocols
21 options HAMMER #Hammer Filesystem
22 options FFS #Berkeley Fast Filesystem
23 options FFS_ROOT #FFS usable as root device [keep this!]
24 options SOFTUPDATES #Enable FFS soft updates support
25 options UFS_DIRHASH #Improve performance on big directories
26 options MFS #Memory Filesystem
27 options MD_ROOT #MD is a potential root device
28 options NFS #Network Filesystem
29 options NFS_ROOT #NFS usable as root device, NFS required
30 options MSDOSFS #MSDOS Filesystem
31 options CD9660 #ISO 9660 Filesystem
32 ##options PROCFS #Process filesystem
33 #JG do we need it? does it work (on amd64)?
34 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
35 ##options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
36 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
37 options DEVICE_POLLING # Support mixed interrupt-polling
38 # handling of network device drivers
39 ##options UCONSOLE #Allow users to grab the console
40 ##options USERCONFIG #boot -c editor
41 ##options VISUAL_USERCONFIG #visual boot -c editor
42 ##options KTRACE #ktrace(1) support
43 options SYSVSHM #SYSV-style shared memory
44 options SYSVMSG #SYSV-style message queues
45 options SYSVSEM #SYSV-style semaphores
46 options P1003_1B #Posix P1003_1B real-time extensions
47 options _KPOSIX_PRIORITY_SCHEDULING
48 ##options ICMP_BANDLIM #Rate limit bad replies
49 ##options KBD_INSTALL_CDEV # install a CDEV entry in /dev
50 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
51 # output. Adds ~128k to driver.
52 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
53 # output. Adds ~215k to driver.
55 # To make an SMP kernel both SMP and APIC_IO are usually
56 # specified. SMP boxes with severely broken BIOSes which
57 # boot fine for non-SMP builds *might* work in SMP mode
58 # if you define SMP and leave APIC_IO turned off.
60 #options SMP # Symmetric MultiProcessor Kernel
61 #options APIC_IO # Symmetric (APIC) I/O
63 # Debugging for Development
69 #options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
76 ##device fdc0 at isa? port IO_FD1 irq 6 drq 2
77 ##device fd0 at fdc0 drive 0
78 ##device fd1 at fdc0 drive 1
80 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
81 # don't use the above line for fdc0 but the following one:
84 # NEW-ATA (NATA) and ATAPI devices
87 device natadisk # ATA disk drives
88 device natapicd # ATAPI CDROM drives
89 device natapifd # ATAPI floppy drives
90 device natapist # ATAPI tape drives
91 device natapicam # Emulate ATAPI devices as SCSI
92 device nataraid # support for ATA software RAID
94 ##device natausb # ATA-over-USB support
95 options ATA_STATIC_ID # Static device numbering
96 options PCI_MAP_FIXUP # Needed for NATA
98 # LEGACY ATA and ATAPI devices
99 #device ata0 at isa? port IO_WD1 irq 14
100 #device ata1 at isa? port IO_WD2 irq 15
102 #device atadisk # ATA disk drives
103 #device atapicd # ATAPI CDROM drives
104 #device atapifd # ATAPI floppy drives
105 #device atapist # ATAPI tape drives
106 #device atapicam # Emulate ATAPI devices as SCSI via CAM
107 #options ATA_STATIC_ID #Static device numbering
110 ##device ahb # EISA AHA1742 family
111 ##device ahc # AHA2940 and onboard AIC7xxx devices
112 ##device ahd # AHA39320/29320 and onboard AIC79xx devices
113 ##device amd # AMD 53C974 (Tekram DC-390(T))
114 ##device isp # Qlogic family
115 ##device mpt # LSI-Logic MPT/Fusion
116 ##device ncr # NCR/Symbios Logic
117 ##device sym # NCR/Symbios Logic (newer chipsets)
118 ##options SYM_SETUP_LP_PROBE_MAP=0x40
119 # Allow ncr to attach legacy NCR devices when
120 # both sym and ncr are configured
122 ##device adv0 at isa?
125 ##device aha0 at isa?
126 ##device aic0 at isa?
128 ##device ncv # NCR 53C500
129 ##device nsp # Workbit Ninja SCSI-3
130 ##device stg # TMC 18C30/18C50
133 device scbus # SCSI bus (required)
134 device da # Direct Access (disks)
135 device sa # Sequential Access (tape etc)
137 device pass # Passthrough device (direct SCSI access)
139 # RAID controllers interfaced to the SCSI subsystem
140 ##device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
141 ##device dpt # DPT Smartcache - See LINT for options!
142 ##device iir # Intel Integrated RAID
143 ##device mly # Mylex AcceleRAID/eXtremeRAID
144 ##device ciss # Compaq SmartRAID 5* series
147 ##device aac # Adaptec FSA RAID, Dell PERC2/PERC3
148 #device aacp # SCSI passthrough for aac (requires CAM)
149 ##device ida # Compaq Smart RAID
150 ##device ips # IBM ServeRAID
151 ##device amr # AMI MegaRAID
152 ##device mlx # Mylex DAC960 family
153 ##device twe # 3ware Escalade 7000/8000's
154 ##device twa # 3ware Escalade 9000's
155 ##device pst # Promise Supertrack
157 # atkbdc0 controls both the keyboard and the PS/2 mouse
158 device atkbdc0 at isa? port IO_KBD
159 device atkbd0 at atkbdc? irq 1 flags 0x1
160 device psm0 at atkbdc? irq 12
164 # splash screen/screen saver
167 # syscons is the default console driver, resembling an SCO console
168 device sc0 at isa? flags 0x100
169 ##options SC_PIXEL_MODE # add support for the raster text mode
171 ##device agp # support several AGP chipsets
173 # Floating point support - do not disable.
174 ##device npx0 at nexus? port IO_NPX irq 13
176 # Power management support (see LINT for more options)
177 ##device apm0 at nexus? disable flags 0x20 # Advanced Power Management
179 # HW monitoring devices
180 ##device lm0 at isa? port 0x290
181 ##device it0 at isa? port 0x290
182 ##device it1 at isa? port 0xc00
183 ##device it2 at isa? port 0xd00
185 # PCCARD (PCMCIA) support
191 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
192 device sio1 at isa? port IO_COM2 irq 3
193 device sio2 at isa? disable port IO_COM3 irq 5
194 device sio3 at isa? disable port IO_COM4 irq 9
197 ##device ppc0 at isa? irq 7
198 ##device ppbus # Parallel port bus (required)
199 ##device lpt # Printer
200 ##device plip # TCP/IP over parallel
201 ##device ppi # Parallel port interface device
202 #device vpo # Requires scbus and da
206 device de # DEC/Intel DC21x4x (``Tulip'')
207 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
208 device txp # 3Com 3cR990 (``Typhoon'')
209 device vx # 3Com 3c590, 3c595 (``Vortex'')
211 # PCI Ethernet NICs that use the common MII bus controller code.
212 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
213 device miibus # MII bus support
214 device bce # Broadcom NetXtreme II Gigabit Ethernet
215 device bfe # Broadcom BCM440x 10/100 Ethernet
216 device dc # DEC/Intel 21143 and various workalikes
217 device et # Agere ET1310 10/100/1000 Ethernet
218 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
219 device pcn # AMD Am79C97x PCI 10/100 NICs
220 device rl # RealTek 8129/8139
221 device re # RealTek 8139C+/8169
222 device sf # Adaptec AIC-6915 (``Starfire'')
223 device sis # Silicon Integrated Systems SiS 900/SiS 7016
224 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
225 device ste # Sundance ST201 (D-Link DFE-550TX)
226 device tl # Texas Instruments ThunderLAN
227 device tx # SMC EtherPower II (83c170 ``EPIC'')
228 device vge # VIA 612x GigE
229 device vr # VIA Rhine, Rhine II
230 device wb # Winbond W89C840F
231 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
232 device bge # Broadcom BCM570x (``Tigon III'')
233 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
234 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
235 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
238 # 'device ed' requires 'device miibus'
239 ##device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
242 ##device fe0 at isa? disable port 0x300
247 ##device wlan # 802.11 support
248 ##device wlan_ccmp # 802.11 CCMP support
249 ##device wlan_tkip # 802.11 TKIP support
250 ##device wlan_wep # 802.11 WEP support
251 # 802.11 TX rate control algorithms
252 #device wlan_ratectl_amrr # AMRR
253 ##device wlan_ratectl_onoe # Onoe
254 ##device wlan_ratectl_sample # Sample
256 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
257 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
258 # mode (the factory default). If you set the switches on your ISA
259 # card for a manually chosen I/O address and IRQ, you must specify
260 # those parameters here.
262 ##device ral # Ralink Technology 802.11 wireless NIC
263 # Requires wlan_ratectl_onoe and
264 # wlan_ratectl_sample
265 ##device rtw # RealTek 802.11 wireless NIC
266 # Requires wlan_ratectl_onoe and wlan_wep
267 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
268 # exists only as a PCMCIA device, so there is no ISA attachment needed
269 # and resources will always be dynamically assigned by the pccard code.
272 # The probe order of these is presently determined by i386/isa/isa_compat.c.
273 ##device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
274 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
275 ##device lnc0 at isa? disable port 0x280 irq 10 drq 0
276 ##device cs0 at isa? disable port 0x300
277 ##device sn0 at isa? disable port 0x300 irq 10
279 # Pseudo devices - the number indicates how many units to allocate.
280 pseudo-device loop # Network loopback
281 pseudo-device ether # Ethernet support
282 pseudo-device sl 1 # Kernel SLIP
283 pseudo-device ppp 1 # Kernel PPP
284 pseudo-device tun # Packet tunnel.
285 pseudo-device pty # Pseudo-ttys (telnet etc)
286 pseudo-device md # Memory "disks"
287 pseudo-device gif # IPv6 and IPv4 tunneling
288 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
290 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
291 # Be aware of the administrative consequences of enabling this!
292 pseudo-device bpf #Berkeley packet filter
294 ##pseudo-device crypto # core crypto support, used by wlan
297 ##device uhci # UHCI PCI->USB interface
298 ##device ohci # OHCI PCI->USB interface
299 ##device usb # USB Bus (required)
300 ##device ugen # Generic
301 ##device uhid # "Human Interface Devices"
302 ##device ukbd # Keyboard
303 ##device ulpt # Printer
304 ##device umass # Disks/Mass storage - Requires scbus and da
306 ##device uscanner # Scanners
307 ##device urio # Diamond Rio MP3 Player
308 # USB Ethernet, requires mii
309 ##device aue # ADMtek USB ethernet
310 ##device axe # ASIX Electronics USB Ethernet
311 ##device cue # CATC USB ethernet
312 ##device kue # Kawasaki LSI USB ethernet
313 ##device rue # RealTek 8150 based USB ethernet
314 # USB wireless NICs, requires wlan, wlan_ratectl_onoe
315 ##device rum # Ralink Technology RT2501USB/RT2601USB
316 ##device ural # Ralink Technology RT2500USB
319 ##device firewire # FireWire bus code
320 ##device sbp # SCSI over FireWire (Requires scbus and da)
321 ##device fwe # Ethernet over FireWire (non-standard!)