2 * Copyright (c) 1997, 1998, 1999
3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
32 * $FreeBSD: src/sys/pci/if_stereg.h,v 1.5.2.3 2002/08/21 15:26:01 ambrisko Exp $
33 * $DragonFly: src/sys/dev/netif/ste/if_stereg.h,v 1.6 2005/06/09 19:10:04 joerg Exp $
37 * Sundance PCI device/vendor ID for the
40 #define ST_VENDORID 0x13F0
41 #define ST_DEVICEID_ST201 0x0201
44 * D-Link PCI device/vendor ID for the DFE-550TX.
46 #define DL_VENDORID 0x1186
47 #define DL_DEVICEID_550TX 0x1002
50 * Register definitions for the Sundance Technologies ST201 PCI
51 * fast ethernet controller. The register space is 128 bytes long and
52 * can be accessed using either PCI I/O space or PCI memory mapping.
53 * There are 32-bit, 16-bit and 8-bit registers.
56 #define STE_DMACTL 0x00
57 #define STE_TX_DMALIST_PTR 0x04
58 #define STE_TX_DMABURST_THRESH 0x08
59 #define STE_TX_DMAURG_THRESH 0x09
60 #define STE_TX_DMAPOLL_PERIOD 0x0A
61 #define STE_RX_DMASTATUS 0x0C
62 #define STE_RX_DMALIST_PTR 0x10
63 #define STE_RX_DMABURST_THRESH 0x14
64 #define STE_RX_DMAURG_THRESH 0x15
65 #define STE_RX_DMAPOLL_PERIOD 0x16
66 #define STE_DEBUGCTL 0x1A
67 #define STE_ASICCTL 0x30
68 #define STE_EEPROM_DATA 0x34
69 #define STE_EEPROM_CTL 0x36
70 #define STE_FIFOCTL 0x3A
71 #define STE_TX_STARTTHRESH 0x3C
72 #define STE_RX_EARLYTHRESH 0x3E
73 #define STE_EXT_ROMADDR 0x40
74 #define STE_EXT_ROMDATA 0x44
75 #define STE_WAKE_EVENT 0x45
76 #define STE_TX_STATUS 0x46
77 #define STE_TX_FRAMEID 0x47
78 #define STE_COUNTDOWN 0x48
79 #define STE_ISR_ACK 0x4A
82 #define STE_MACCTL0 0x50
83 #define STE_MACCTL1 0x52
87 #define STE_MAX_FRAMELEN 0x5A
88 #define STE_RX_MODE 0x5C
89 #define STE_TX_RECLAIM_THRESH 0x5D
90 #define STE_PHYCTL 0x5E
95 #define STE_STATS 0x68
97 #define STE_LATE_COLLS 0x75
98 #define STE_MULTI_COLLS 0x76
99 #define STE_SINGLE_COLLS 0x77
101 #define STE_DMACTL_RXDMA_STOPPED 0x00000001
102 #define STE_DMACTL_TXDMA_CMPREQ 0x00000002
103 #define STE_DMACTL_TXDMA_STOPPED 0x00000004
104 #define STE_DMACTL_RXDMA_COMPLETE 0x00000008
105 #define STE_DMACTL_TXDMA_COMPLETE 0x00000010
106 #define STE_DMACTL_RXDMA_STALL 0x00000100
107 #define STE_DMACTL_RXDMA_UNSTALL 0x00000200
108 #define STE_DMACTL_TXDMA_STALL 0x00000400
109 #define STE_DMACTL_TXDMA_UNSTALL 0x00000800
110 #define STE_DMACTL_TXDMA_INPROG 0x00004000
111 #define STE_DMACTL_DMA_HALTINPROG 0x00008000
112 #define STE_DMACTL_RXEARLY_ENABLE 0x00020000
113 #define STE_DMACTL_COUNTDOWN_SPEED 0x00040000
114 #define STE_DMACTL_COUNTDOWN_MODE 0x00080000
115 #define STE_DMACTL_MWI_DISABLE 0x00100000
116 #define STE_DMACTL_RX_DISCARD_OFLOWS 0x00400000
117 #define STE_DMACTL_COUNTDOWN_ENABLE 0x00800000
118 #define STE_DMACTL_TARGET_ABORT 0x40000000
119 #define STE_DMACTL_MASTER_ABORT 0x80000000
122 * TX DMA burst thresh is the number of 32-byte blocks that
123 * must be loaded into the TX Fifo before a TXDMA burst request
126 #define STE_TXDMABURST_THRESH 0x1F
129 * The number of 32-byte blocks in the TX FIFO falls below the
130 * TX DMA urgent threshold, a TX DMA urgent request will be
133 #define STE_TXDMAURG_THRESH 0x3F
136 * Number of 320ns intervals between polls of the TXDMA next
137 * descriptor pointer (if we're using polling mode).
139 #define STE_TXDMA_POLL_PERIOD 0x7F
141 #define STE_RX_DMASTATUS_FRAMELEN 0x00001FFF
142 #define STE_RX_DMASTATUS_RXERR 0x00004000
143 #define STE_RX_DMASTATUS_DMADONE 0x00008000
144 #define STE_RX_DMASTATUS_FIFO_OFLOW 0x00010000
145 #define STE_RX_DMASTATUS_RUNT 0x00020000
146 #define STE_RX_DMASTATUS_ALIGNERR 0x00040000
147 #define STE_RX_DMASTATUS_CRCERR 0x00080000
148 #define STE_RX_DMASTATUS_GIANT 0x00100000
149 #define STE_RX_DMASTATUS_DRIBBLE 0x00800000
150 #define STE_RX_DMASTATUS_DMA_OFLOW 0x01000000
153 * RX DMA burst thresh is the number of 32-byte blocks that
154 * must be present in the RX FIFO before a RXDMA bus master
155 * request will be issued.
157 #define STE_RXDMABURST_THRESH 0xFF
160 * The number of 32-byte blocks in the RX FIFO falls below the
161 * RX DMA urgent threshold, a RX DMA urgent request will be
164 #define STE_RXDMAURG_THRESH 0x1F
167 * Number of 320ns intervals between polls of the RXDMA complete
168 * bit in the status field on the current RX descriptor (if we're
169 * using polling mode).
171 #define STE_RXDMA_POLL_PERIOD 0x7F
173 #define STE_DEBUGCTL_GPIO0_CTL 0x0001
174 #define STE_DEBUGCTL_GPIO1_CTL 0x0002
175 #define STE_DEBUGCTL_GPIO0_DATA 0x0004
176 #define STE_DEBUGCTL_GPIO1_DATA 0x0008
178 #define STE_ASICCTL_ROMSIZE 0x00000002
179 #define STE_ASICCTL_TX_LARGEPKTS 0x00000004
180 #define STE_ASICCTL_RX_LARGEPKTS 0x00000008
181 #define STE_ASICCTL_EXTROM_DISABLE 0x00000010
182 #define STE_ASICCTL_PHYSPEED_10 0x00000020
183 #define STE_ASICCTL_PHYSPEED_100 0x00000040
184 #define STE_ASICCTL_PHYMEDIA 0x00000080
185 #define STE_ASICCTL_FORCEDCONFIG 0x00000700
186 #define STE_ASICCTL_D3RESET_DISABLE 0x00000800
187 #define STE_ASICCTL_SPEEDUPMODE 0x00002000
188 #define STE_ASICCTL_LEDMODE 0x00004000
189 #define STE_ASICCTL_RSTOUT_POLARITY 0x00008000
190 #define STE_ASICCTL_GLOBAL_RESET 0x00010000
191 #define STE_ASICCTL_RX_RESET 0x00020000
192 #define STE_ASICCTL_TX_RESET 0x00040000
193 #define STE_ASICCTL_DMA_RESET 0x00080000
194 #define STE_ASICCTL_FIFO_RESET 0x00100000
195 #define STE_ASICCTL_NETWORK_RESET 0x00200000
196 #define STE_ASICCTL_HOST_RESET 0x00400000
197 #define STE_ASICCTL_AUTOINIT_RESET 0x00800000
198 #define STE_ASICCTL_EXTRESET_RESET 0x01000000
199 #define STE_ASICCTL_SOFTINTR 0x02000000
200 #define STE_ASICCTL_RESET_BUSY 0x04000000
202 #define STE_ASICCTL1_GLOBAL_RESET 0x0001
203 #define STE_ASICCTL1_RX_RESET 0x0002
204 #define STE_ASICCTL1_TX_RESET 0x0004
205 #define STE_ASICCTL1_DMA_RESET 0x0008
206 #define STE_ASICCTL1_FIFO_RESET 0x0010
207 #define STE_ASICCTL1_NETWORK_RESET 0x0020
208 #define STE_ASICCTL1_HOST_RESET 0x0040
209 #define STE_ASICCTL1_AUTOINIT_RESET 0x0080
210 #define STE_ASICCTL1_EXTRESET_RESET 0x0100
211 #define STE_ASICCTL1_SOFTINTR 0x0200
212 #define STE_ASICCTL1_RESET_BUSY 0x0400
214 #define STE_EECTL_ADDR 0x00FF
215 #define STE_EECTL_OPCODE 0x0300
216 #define STE_EECTL_BUSY 0x1000
218 #define STE_EEOPCODE_WRITE 0x0100
219 #define STE_EEOPCODE_READ 0x0200
220 #define STE_EEOPCODE_ERASE 0x0300
222 #define STE_FIFOCTL_RAMTESTMODE 0x0001
223 #define STE_FIFOCTL_OVERRUNMODE 0x0200
224 #define STE_FIFOCTL_RXFIFOFULL 0x0800
225 #define STE_FIFOCTL_TX_BUSY 0x4000
226 #define STE_FIFOCTL_RX_BUSY 0x8000
229 * The number of bytes that must in present in the TX FIFO before
230 * transmission begins. Value should be in increments of 4 bytes.
232 #define STE_TXSTART_THRESH 0x1FFC
235 * Number of bytes that must be present in the RX FIFO before
236 * an RX EARLY interrupt is generated.
238 #define STE_RXEARLY_THRESH 0x1FFC
240 #define STE_WAKEEVENT_WAKEPKT_ENB 0x01
241 #define STE_WAKEEVENT_MAGICPKT_ENB 0x02
242 #define STE_WAKEEVENT_LINKEVT_ENB 0x04
243 #define STE_WAKEEVENT_WAKEPOLARITY 0x08
244 #define STE_WAKEEVENT_WAKEPKTEVENT 0x10
245 #define STE_WAKEEVENT_MAGICPKTEVENT 0x20
246 #define STE_WAKEEVENT_LINKEVENT 0x40
247 #define STE_WAKEEVENT_WAKEONLAN_ENB 0x80
249 #define STE_TXSTATUS_RECLAIMERR 0x02
250 #define STE_TXSTATUS_STATSOFLOW 0x04
251 #define STE_TXSTATUS_EXCESSCOLLS 0x08
252 #define STE_TXSTATUS_UNDERRUN 0x10
253 #define STE_TXSTATUS_TXINTR_REQ 0x40
254 #define STE_TXSTATUS_TXDONE 0x80
256 #define STE_ISRACK_INTLATCH 0x0001
257 #define STE_ISRACK_HOSTERR 0x0002
258 #define STE_ISRACK_TX_DONE 0x0004
259 #define STE_ISRACK_MACCTL_FRAME 0x0008
260 #define STE_ISRACK_RX_DONE 0x0010
261 #define STE_ISRACK_RX_EARLY 0x0020
262 #define STE_ISRACK_SOFTINTR 0x0040
263 #define STE_ISRACK_STATS_OFLOW 0x0080
264 #define STE_ISRACK_LINKEVENT 0x0100
265 #define STE_ISRACK_TX_DMADONE 0x0200
266 #define STE_ISRACK_RX_DMADONE 0x0400
268 #define STE_IMR_HOSTERR 0x0002
269 #define STE_IMR_TX_DONE 0x0004
270 #define STE_IMR_MACCTL_FRAME 0x0008
271 #define STE_IMR_RX_DONE 0x0010
272 #define STE_IMR_RX_EARLY 0x0020
273 #define STE_IMR_SOFTINTR 0x0040
274 #define STE_IMR_STATS_OFLOW 0x0080
275 #define STE_IMR_LINKEVENT 0x0100
276 #define STE_IMR_TX_DMADONE 0x0200
277 #define STE_IMR_RX_DMADONE 0x0400
280 (STE_IMR_RX_DMADONE|STE_IMR_TX_DMADONE| \
281 STE_IMR_TX_DONE|STE_IMR_HOSTERR| \
284 #define STE_ISR_INTLATCH 0x0001
285 #define STE_ISR_HOSTERR 0x0002
286 #define STE_ISR_TX_DONE 0x0004
287 #define STE_ISR_MACCTL_FRAME 0x0008
288 #define STE_ISR_RX_DONE 0x0010
289 #define STE_ISR_RX_EARLY 0x0020
290 #define STE_ISR_SOFTINTR 0x0040
291 #define STE_ISR_STATS_OFLOW 0x0080
292 #define STE_ISR_LINKEVENT 0x0100
293 #define STE_ISR_TX_DMADONE 0x0200
294 #define STE_ISR_RX_DMADONE 0x0400
297 * Note: the Sundance manual gives the impression that the's
298 * only one 32-bit MACCTL register. In fact, there are two
299 * 16-bit registers side by side, and you have to access them
302 #define STE_MACCTL0_IPG 0x0003
303 #define STE_MACCTL0_FULLDUPLEX 0x0020
304 #define STE_MACCTL0_RX_GIANTS 0x0040
305 #define STE_MACCTL0_FLOWCTL_ENABLE 0x0100
306 #define STE_MACCTL0_RX_FCS 0x0200
307 #define STE_MACCTL0_FIFOLOOPBK 0x0400
308 #define STE_MACCTL0_MACLOOPBK 0x0800
310 #define STE_MACCTL1_COLLDETECT 0x0001
311 #define STE_MACCTL1_CARRSENSE 0x0002
312 #define STE_MACCTL1_TX_BUSY 0x0004
313 #define STE_MACCTL1_TX_ERROR 0x0008
314 #define STE_MACCTL1_STATS_ENABLE 0x0020
315 #define STE_MACCTL1_STATS_DISABLE 0x0040
316 #define STE_MACCTL1_STATS_ENABLED 0x0080
317 #define STE_MACCTL1_TX_ENABLE 0x0100
318 #define STE_MACCTL1_TX_DISABLE 0x0200
319 #define STE_MACCTL1_TX_ENABLED 0x0400
320 #define STE_MACCTL1_RX_ENABLE 0x0800
321 #define STE_MACCTL1_RX_DISABLE 0x1000
322 #define STE_MACCTL1_RX_ENABLED 0x2000
323 #define STE_MACCTL1_PAUSED 0x4000
325 #define STE_IPG_96BT 0x00000000
326 #define STE_IPG_128BT 0x00000001
327 #define STE_IPG_224BT 0x00000002
328 #define STE_IPG_544BT 0x00000003
330 #define STE_RXMODE_UNICAST 0x01
331 #define STE_RXMODE_ALLMULTI 0x02
332 #define STE_RXMODE_BROADCAST 0x04
333 #define STE_RXMODE_PROMISC 0x08
334 #define STE_RXMODE_MULTIHASH 0x10
335 #define STE_RXMODE_ALLIPMULTI 0x20
337 #define STE_PHYCTL_MCLK 0x01
338 #define STE_PHYCTL_MDATA 0x02
339 #define STE_PHYCTL_MDIR 0x04
340 #define STE_PHYCTL_CLK25_DISABLE 0x08
341 #define STE_PHYCTL_DUPLEXPOLARITY 0x10
342 #define STE_PHYCTL_DUPLEXSTAT 0x20
343 #define STE_PHYCTL_SPEEDSTAT 0x40
344 #define STE_PHYCTL_LINKSTAT 0x80
349 #define STE_EEADDR_CONFIGPARM 0x00
350 #define STE_EEADDR_ASICCTL 0x02
351 #define STE_EEADDR_SUBSYS_ID 0x04
352 #define STE_EEADDR_SUBVEN_ID 0x08
354 #define STE_EEADDR_NODE0 0x10
355 #define STE_EEADDR_NODE1 0x12
356 #define STE_EEADDR_NODE2 0x14
359 #define STE_PCI_VENDOR_ID 0x00
360 #define STE_PCI_DEVICE_ID 0x02
361 #define STE_PCI_COMMAND 0x04
362 #define STE_PCI_STATUS 0x06
363 #define STE_PCI_CLASSCODE 0x09
364 #define STE_PCI_LATENCY_TIMER 0x0D
365 #define STE_PCI_HEADER_TYPE 0x0E
366 #define STE_PCI_LOIO 0x10
367 #define STE_PCI_LOMEM 0x14
368 #define STE_PCI_BIOSROM 0x30
369 #define STE_PCI_INTLINE 0x3C
370 #define STE_PCI_INTPIN 0x3D
371 #define STE_PCI_MINGNT 0x3E
372 #define STE_PCI_MINLAT 0x0F
374 #define STE_PCI_CAPID 0x50 /* 8 bits */
375 #define STE_PCI_NEXTPTR 0x51 /* 8 bits */
376 #define STE_PCI_PWRMGMTCAP 0x52 /* 16 bits */
377 #define STE_PCI_PWRMGMTCTRL 0x54 /* 16 bits */
379 #define STE_PME_EN 0x0010
380 #define STE_PME_STATUS 0x8000
384 u_int32_t ste_rx_bytes;
385 u_int32_t ste_tx_bytes;
386 u_int16_t ste_tx_frames;
387 u_int16_t ste_rx_frames;
388 u_int8_t ste_carrsense_errs;
389 u_int8_t ste_late_colls;
390 u_int8_t ste_multi_colls;
391 u_int8_t ste_single_colls;
392 u_int8_t ste_tx_frames_defered;
393 u_int8_t ste_rx_lost_frames;
394 u_int8_t ste_tx_excess_defers;
395 u_int8_t ste_tx_abort_excess_colls;
396 u_int8_t ste_tx_bcast_frames;
397 u_int8_t ste_rx_bcast_frames;
398 u_int8_t ste_tx_mcast_frames;
399 u_int8_t ste_rx_mcast_frames;
407 #define STE_FRAG_LAST 0x80000000
408 #define STE_FRAG_LEN 0x00001FFF
410 #define STE_MAXFRAGS 8
415 struct ste_frag ste_frags[STE_MAXFRAGS];
418 struct ste_desc_onefrag {
420 u_int32_t ste_status;
421 struct ste_frag ste_frag;
424 #define STE_TXCTL_WORDALIGN 0x00000003
425 #define STE_TXCTL_FRAMEID 0x000003FC
426 #define STE_TXCTL_NOCRC 0x00002000
427 #define STE_TXCTL_TXINTR 0x00008000
428 #define STE_TXCTL_DMADONE 0x00010000
429 #define STE_TXCTL_DMAINTR 0x80000000
431 #define STE_RXSTAT_FRAMELEN 0x00001FFF
432 #define STE_RXSTAT_FRAME_ERR 0x00004000
433 #define STE_RXSTAT_DMADONE 0x00008000
434 #define STE_RXSTAT_FIFO_OFLOW 0x00010000
435 #define STE_RXSTAT_RUNT 0x00020000
436 #define STE_RXSTAT_ALIGNERR 0x00040000
437 #define STE_RXSTAT_CRCERR 0x00080000
438 #define STE_RXSTAT_GIANT 0x00100000
439 #define STE_RXSTAT_DRIBBLEBITS 0x00800000
440 #define STE_RXSTAT_DMA_OFLOW 0x01000000
441 #define STE_RXATAT_ONEBUF 0x10000000
444 * register space access macros
446 #define CSR_WRITE_4(sc, reg, val) \
447 bus_space_write_4(sc->ste_btag, sc->ste_bhandle, reg, val)
448 #define CSR_WRITE_2(sc, reg, val) \
449 bus_space_write_2(sc->ste_btag, sc->ste_bhandle, reg, val)
450 #define CSR_WRITE_1(sc, reg, val) \
451 bus_space_write_1(sc->ste_btag, sc->ste_bhandle, reg, val)
453 #define CSR_READ_4(sc, reg) \
454 bus_space_read_4(sc->ste_btag, sc->ste_bhandle, reg)
455 #define CSR_READ_2(sc, reg) \
456 bus_space_read_2(sc->ste_btag, sc->ste_bhandle, reg)
457 #define CSR_READ_1(sc, reg) \
458 bus_space_read_1(sc->ste_btag, sc->ste_bhandle, reg)
460 #define STE_TIMEOUT 1000
461 #define STE_MIN_FRAMELEN 60
462 #define STE_PACKET_SIZE 1536
463 #define ETHER_ALIGN 2
464 #define STE_RX_LIST_CNT 64
465 #define STE_TX_LIST_CNT 64
466 #define STE_INC(x, y) (x) = (x + 1) % y
467 #define STE_NEXT(x, y) (x + 1) % y
475 struct ste_list_data {
476 struct ste_desc_onefrag ste_rx_list[STE_RX_LIST_CNT];
477 struct ste_desc ste_tx_list[STE_TX_LIST_CNT];
478 u_int8_t ste_pad[STE_MIN_FRAMELEN];
482 struct ste_desc *ste_ptr;
483 struct mbuf *ste_mbuf;
484 struct ste_chain *ste_next;
485 struct ste_chain *ste_prev;
489 struct ste_chain_onefrag {
490 struct ste_desc_onefrag *ste_ptr;
491 struct mbuf *ste_mbuf;
492 struct ste_chain_onefrag *ste_next;
495 struct ste_chain_data {
496 struct ste_chain_onefrag ste_rx_chain[STE_RX_LIST_CNT];
497 struct ste_chain ste_tx_chain[STE_TX_LIST_CNT];
498 struct ste_chain_onefrag *ste_rx_head;
506 struct arpcom arpcom;
507 bus_space_tag_t ste_btag;
508 bus_space_handle_t ste_bhandle;
509 struct resource *ste_res;
510 struct resource *ste_irq;
512 struct ste_type *ste_info;
519 struct ste_list_data *ste_ldata;
520 struct ste_chain_data ste_cdata;
521 struct callout ste_stat_timer;
522 u_int8_t ste_one_phy;
525 struct ste_mii_frame {
526 u_int8_t mii_stdelim;
528 u_int8_t mii_phyaddr;
529 u_int8_t mii_regaddr;
530 u_int8_t mii_turnaround;
537 #define STE_MII_STARTDELIM 0x01
538 #define STE_MII_READOP 0x02
539 #define STE_MII_WRITEOP 0x01
540 #define STE_MII_TURNAROUND 0x02