Merge branch 'vendor/BYACC'
[dragonfly.git] / libexec / telnetd / telnetd.c
1 /*
2  * Copyright (c) 1989, 1993
3  *      The Regents of the University of California.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the University nor the names of its contributors
14  *    may be used to endorse or promote products derived from this software
15  *    without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE.
28  *
29  * @(#)telnetd.c        8.4 (Berkeley) 5/30/95
30  * $FreeBSD: src/crypto/telnet/telnetd/telnetd.c,v 1.11.2.5 2002/04/13 10:59:09 markm Exp $
31  */
32
33 #include "telnetd.h"
34 #include "pathnames.h"
35
36 #include <sys/mman.h>
37 #include <err.h>
38 #include <libutil.h>
39 #include <paths.h>
40 #include <termcap.h>
41
42 #include <arpa/inet.h>
43
44 #ifdef  AUTHENTICATION
45 #include <libtelnet/auth.h>
46 int     auth_level = 0;
47 #endif
48 #ifdef  ENCRYPTION
49 #include <libtelnet/encrypt.h>
50 #endif
51 #include <libtelnet/misc.h>
52
53 char    remote_hostname[MAXHOSTNAMELEN];
54 int     registerd_host_only = 0;
55
56
57 /*
58  * I/O data buffers,
59  * pointers, and counters.
60  */
61 char    ptyibuf[BUFSIZ], *ptyip = ptyibuf;
62 char    ptyibuf2[BUFSIZ];
63
64 int readstream(int, char *, int);
65 void doit(struct sockaddr *) __dead2;
66 int terminaltypeok(char *);
67
68 int     hostinfo = 1;                   /* do we print login banner? */
69
70 static int debug = 0;
71 int keepalive = 1;
72 const char *altlogin;
73
74 void startslave(char *, int, char *);
75 extern void usage(void) __dead2;
76 static void _gettermname(void);
77
78 /*
79  * The string to pass to getopt().  We do it this way so
80  * that only the actual options that we support will be
81  * passed off to getopt().
82  */
83 char valid_opts[] = {
84         'd', ':', 'h', 'k', 'n', 'p', ':', 'S', ':', 'u', ':', 'U',
85         '4', '6',
86 #ifdef  AUTHENTICATION
87         'a', ':', 'X', ':',
88 #endif
89 #ifdef BFTPDAEMON
90         'B',
91 #endif
92 #ifdef DIAGNOSTICS
93         'D', ':',
94 #endif
95 #ifdef  ENCRYPTION
96         'e', ':',
97 #endif
98 #ifdef  LINEMODE
99         'l',
100 #endif
101         '\0'
102 };
103
104 int family = AF_INET;
105
106 #ifndef MAXHOSTNAMELEN
107 #define MAXHOSTNAMELEN 256
108 #endif  /* MAXHOSTNAMELEN */
109
110 char *hostname;
111 char host_name[MAXHOSTNAMELEN];
112
113 extern void telnet(int, int, char *) __dead2;
114 extern char *terminaltype;
115
116 int level;
117 char user_name[256];
118
119 int
120 main(int argc, char *argv[])
121 {
122         struct sockaddr_storage from;
123         int on = 1, fromlen;
124         int ch;
125 #if     defined(IPPROTO_IP) && defined(IP_TOS)
126         int tos = -1;
127 #endif
128
129         pfrontp = pbackp = ptyobuf;
130         netip = netibuf;
131         nfrontp = nbackp = netobuf;
132 #ifdef  ENCRYPTION
133         nclearto = 0;
134 #endif  /* ENCRYPTION */
135
136         /*
137          * This initialization causes linemode to default to a configuration
138          * that works on all telnet clients, including the FreeBSD client.
139          * This is not quite the same as the telnet client issuing a "mode
140          * character" command, but has most of the same benefits, and is
141          * preferable since some clients (like usofts) don't have the
142          * mode character command anyway and linemode breaks things.
143          * The most notable symptom of fix is that csh "set filec" operations
144          * like <ESC> (filename completion) and ^D (choices) keys now work
145          * in telnet sessions and can be used more than once on the same line.
146          * CR/LF handling is also corrected in some termio modes.  This 
147          * change resolves problem reports bin/771 and bin/1037.
148          */
149
150         linemode=1;     /*Default to mode that works on bulk of clients*/
151
152         while ((ch = getopt(argc, argv, valid_opts)) != -1) {
153                 switch(ch) {
154
155 #ifdef  AUTHENTICATION
156                 case 'a':
157                         /*
158                          * Check for required authentication level
159                          */
160                         if (strcmp(optarg, "debug") == 0) {
161                                 extern int auth_debug_mode;
162                                 auth_debug_mode = 1;
163                         } else if (strcasecmp(optarg, "none") == 0) {
164                                 auth_level = 0;
165                         } else if (strcasecmp(optarg, "other") == 0) {
166                                 auth_level = AUTH_OTHER;
167                         } else if (strcasecmp(optarg, "user") == 0) {
168                                 auth_level = AUTH_USER;
169                         } else if (strcasecmp(optarg, "valid") == 0) {
170                                 auth_level = AUTH_VALID;
171                         } else if (strcasecmp(optarg, "off") == 0) {
172                                 /*
173                                  * This hack turns off authentication
174                                  */
175                                 auth_level = -1;
176                         } else {
177                                 warnx("unknown authorization level for -a");
178                         }
179                         break;
180 #endif  /* AUTHENTICATION */
181
182 #ifdef BFTPDAEMON
183                 case 'B':
184                         bftpd++;
185                         break;
186 #endif /* BFTPDAEMON */
187
188                 case 'd':
189                         if (strcmp(optarg, "ebug") == 0) {
190                                 debug++;
191                                 break;
192                         }
193                         usage();
194                         /* NOTREACHED */
195                         break;
196
197 #ifdef DIAGNOSTICS
198                 case 'D':
199                         /*
200                          * Check for desired diagnostics capabilities.
201                          */
202                         if (!strcmp(optarg, "report")) {
203                                 diagnostic |= TD_REPORT|TD_OPTIONS;
204                         } else if (!strcmp(optarg, "exercise")) {
205                                 diagnostic |= TD_EXERCISE;
206                         } else if (!strcmp(optarg, "netdata")) {
207                                 diagnostic |= TD_NETDATA;
208                         } else if (!strcmp(optarg, "ptydata")) {
209                                 diagnostic |= TD_PTYDATA;
210                         } else if (!strcmp(optarg, "options")) {
211                                 diagnostic |= TD_OPTIONS;
212                         } else {
213                                 usage();
214                                 /* NOT REACHED */
215                         }
216                         break;
217 #endif /* DIAGNOSTICS */
218
219 #ifdef  ENCRYPTION
220                 case 'e':
221                         if (strcmp(optarg, "debug") == 0) {
222                                 extern int encrypt_debug_mode;
223                                 encrypt_debug_mode = 1;
224                                 break;
225                         }
226                         usage();
227                         /* NOTREACHED */
228                         break;
229 #endif  /* ENCRYPTION */
230
231                 case 'h':
232                         hostinfo = 0;
233                         break;
234
235 #ifdef  LINEMODE
236                 case 'l':
237                         alwayslinemode = 1;
238                         break;
239 #endif  /* LINEMODE */
240
241                 case 'k':
242 #if     defined(LINEMODE) && defined(KLUDGELINEMODE)
243                         lmodetype = NO_AUTOKLUDGE;
244 #else
245                         /* ignore -k option if built without kludge linemode */
246 #endif  /* defined(LINEMODE) && defined(KLUDGELINEMODE) */
247                         break;
248
249                 case 'n':
250                         keepalive = 0;
251                         break;
252
253                 case 'p':
254                         altlogin = optarg;
255                         break;
256
257                 case 'S':
258 #ifdef  HAS_GETTOS
259                         if ((tos = parsetos(optarg, "tcp")) < 0)
260                                 warnx("%s%s%s",
261                                         "bad TOS argument '", optarg,
262                                         "'; will try to use default TOS");
263 #else
264                         warnx("TOS option unavailable; -S flag not supported");
265 #endif
266                         break;
267
268                 case 'u':
269                         fprintf(stderr, "telnetd: -u option unneeded\n");
270                         break;
271
272                 case 'U':
273                         registerd_host_only = 1;
274                         break;
275
276 #ifdef  AUTHENTICATION
277                 case 'X':
278                         /*
279                          * Check for invalid authentication types
280                          */
281                         auth_disable_name(optarg);
282                         break;
283 #endif  /* AUTHENTICATION */
284
285                 case '4':
286                         family = AF_INET;
287                         break;
288
289 #ifdef INET6
290                 case '6':
291                         family = AF_INET6;
292                         break;
293 #endif
294
295                 default:
296                         warnx("%c: unknown option", ch);
297                         /* FALLTHROUGH */
298                 case '?':
299                         usage();
300                         /* NOTREACHED */
301                 }
302         }
303
304         argc -= optind;
305         argv += optind;
306
307         if (debug) {
308             int s, ns, foo, error;
309             const char *service = "telnet";
310             struct addrinfo hints, *res;
311
312             if (argc > 1) {
313                 usage();
314                 /* NOT REACHED */
315             } else if (argc == 1)
316                 service = *argv;
317
318             memset(&hints, 0, sizeof(hints));
319             hints.ai_flags = AI_PASSIVE;
320             hints.ai_family = family;
321             hints.ai_socktype = SOCK_STREAM;
322             hints.ai_protocol = 0;
323             error = getaddrinfo(NULL, service, &hints, &res);
324
325             if (error) {
326                 errx(1, "tcp/%s: %s\n", service, gai_strerror(error));
327                 if (error == EAI_SYSTEM)
328                     errx(1, "tcp/%s: %s\n", service, strerror(errno));
329                 usage();
330             }
331
332             s = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
333             if (s < 0)
334                     err(1, "socket");
335             (void) setsockopt(s, SOL_SOCKET, SO_REUSEADDR,
336                                 (char *)&on, sizeof(on));
337             if (bind(s, res->ai_addr, res->ai_addrlen) < 0)
338                 err(1, "bind");
339             if (listen(s, 1) < 0)
340                 err(1, "listen");
341             foo = res->ai_addrlen;
342             ns = accept(s, res->ai_addr, &foo);
343             if (ns < 0)
344                 err(1, "accept");
345             (void) dup2(ns, 0);
346             (void) close(ns);
347             (void) close(s);
348 #ifdef convex
349         } else if (argc == 1) {
350                 ; /* VOID*/             /* Just ignore the host/port name */
351 #endif
352         } else if (argc > 0) {
353                 usage();
354                 /* NOT REACHED */
355         }
356
357         openlog("telnetd", LOG_PID, LOG_DAEMON);
358         fromlen = sizeof (from);
359         if (getpeername(0, (struct sockaddr *)&from, &fromlen) < 0) {
360                 warn("getpeername");
361                 _exit(1);
362         }
363         if (keepalive &&
364             setsockopt(0, SOL_SOCKET, SO_KEEPALIVE,
365                         (char *)&on, sizeof (on)) < 0) {
366                 syslog(LOG_WARNING, "setsockopt (SO_KEEPALIVE): %m");
367         }
368
369 #if     defined(IPPROTO_IP) && defined(IP_TOS)
370         if (from.ss_family == AF_INET) {
371 # if    defined(HAS_GETTOS)
372                 struct tosent *tp;
373                 if (tos < 0 && (tp = gettosbyname("telnet", "tcp")))
374                         tos = tp->t_tos;
375 # endif
376                 if (tos < 0)
377                         tos = 020;      /* Low Delay bit */
378                 if (tos
379                    && (setsockopt(0, IPPROTO_IP, IP_TOS,
380                                   (char *)&tos, sizeof(tos)) < 0)
381                    && (errno != ENOPROTOOPT) )
382                         syslog(LOG_WARNING, "setsockopt (IP_TOS): %m");
383         }
384 #endif  /* defined(IPPROTO_IP) && defined(IP_TOS) */
385         net = 0;
386         doit((struct sockaddr *)&from);
387         /* NOTREACHED */
388         return(0);
389 }  /* end of main */
390
391 void
392 usage(void)
393 {
394         fprintf(stderr, "usage: telnetd");
395 #ifdef  AUTHENTICATION
396         fprintf(stderr, " [-a (debug|other|user|valid|off|none)]\n\t");
397 #endif
398 #ifdef BFTPDAEMON
399         fprintf(stderr, " [-B]");
400 #endif
401         fprintf(stderr, " [-debug]");
402 #ifdef DIAGNOSTICS
403         fprintf(stderr, " [-D (options|report|exercise|netdata|ptydata)]\n\t");
404 #endif
405 #ifdef  AUTHENTICATION
406         fprintf(stderr, " [-edebug]");
407 #endif
408         fprintf(stderr, " [-h]");
409 #if     defined(LINEMODE) && defined(KLUDGELINEMODE)
410         fprintf(stderr, " [-k]");
411 #endif
412 #ifdef LINEMODE
413         fprintf(stderr, " [-l]");
414 #endif
415         fprintf(stderr, " [-n]");
416         fprintf(stderr, "\n\t");
417 #ifdef  HAS_GETTOS
418         fprintf(stderr, " [-S tos]");
419 #endif
420 #ifdef  AUTHENTICATION
421         fprintf(stderr, " [-X auth-type]");
422 #endif
423         fprintf(stderr, " [-u utmp_hostname_length] [-U]");
424         fprintf(stderr, " [port]\n");
425         exit(1);
426 }
427
428 /*
429  * getterminaltype
430  *
431  *      Ask the other end to send along its terminal type and speed.
432  * Output is the variable terminaltype filled in.
433  */
434 static unsigned char ttytype_sbbuf[] = {
435         IAC, SB, TELOPT_TTYPE, TELQUAL_SEND, IAC, SE
436 };
437
438
439 #ifndef AUTHENTICATION
440 #define undef2 __unused
441 #else
442 #define undef2
443 #endif
444
445 static int
446 getterminaltype(char *name undef2)
447 {
448     int retval = -1;
449
450     settimer(baseline);
451 #ifdef  AUTHENTICATION
452     /*
453      * Handle the Authentication option before we do anything else.
454      */
455     send_do(TELOPT_AUTHENTICATION, 1);
456     while (his_will_wont_is_changing(TELOPT_AUTHENTICATION))
457         ttloop();
458     if (his_state_is_will(TELOPT_AUTHENTICATION)) {
459         retval = auth_wait(name);
460     }
461 #endif
462
463 #ifdef  ENCRYPTION
464     send_will(TELOPT_ENCRYPT, 1);
465 #endif  /* ENCRYPTION */
466     send_do(TELOPT_TTYPE, 1);
467     send_do(TELOPT_TSPEED, 1);
468     send_do(TELOPT_XDISPLOC, 1);
469     send_do(TELOPT_NEW_ENVIRON, 1);
470     send_do(TELOPT_OLD_ENVIRON, 1);
471     while (
472 #ifdef  ENCRYPTION
473            his_do_dont_is_changing(TELOPT_ENCRYPT) ||
474 #endif  /* ENCRYPTION */
475            his_will_wont_is_changing(TELOPT_TTYPE) ||
476            his_will_wont_is_changing(TELOPT_TSPEED) ||
477            his_will_wont_is_changing(TELOPT_XDISPLOC) ||
478            his_will_wont_is_changing(TELOPT_NEW_ENVIRON) ||
479            his_will_wont_is_changing(TELOPT_OLD_ENVIRON)) {
480         ttloop();
481     }
482 #ifdef  ENCRYPTION
483     /*
484      * Wait for the negotiation of what type of encryption we can
485      * send with.  If autoencrypt is not set, this will just return.
486      */
487     if (his_state_is_will(TELOPT_ENCRYPT)) {
488         encrypt_wait();
489     }
490 #endif  /* ENCRYPTION */
491     if (his_state_is_will(TELOPT_TSPEED)) {
492         static unsigned char sb[] =
493                         { IAC, SB, TELOPT_TSPEED, TELQUAL_SEND, IAC, SE };
494
495         output_datalen(sb, sizeof sb);
496         DIAG(TD_OPTIONS, printsub('>', sb + 2, sizeof sb - 2););
497     }
498     if (his_state_is_will(TELOPT_XDISPLOC)) {
499         static unsigned char sb[] =
500                         { IAC, SB, TELOPT_XDISPLOC, TELQUAL_SEND, IAC, SE };
501
502         output_datalen(sb, sizeof sb);
503         DIAG(TD_OPTIONS, printsub('>', sb + 2, sizeof sb - 2););
504     }
505     if (his_state_is_will(TELOPT_NEW_ENVIRON)) {
506         static unsigned char sb[] =
507                         { IAC, SB, TELOPT_NEW_ENVIRON, TELQUAL_SEND, IAC, SE };
508
509         output_datalen(sb, sizeof sb);
510         DIAG(TD_OPTIONS, printsub('>', sb + 2, sizeof sb - 2););
511     }
512     else if (his_state_is_will(TELOPT_OLD_ENVIRON)) {
513         static unsigned char sb[] =
514                         { IAC, SB, TELOPT_OLD_ENVIRON, TELQUAL_SEND, IAC, SE };
515
516         output_datalen(sb, sizeof sb);
517         DIAG(TD_OPTIONS, printsub('>', sb + 2, sizeof sb - 2););
518     }
519     if (his_state_is_will(TELOPT_TTYPE)) {
520
521         output_datalen(ttytype_sbbuf, sizeof ttytype_sbbuf);
522         DIAG(TD_OPTIONS, printsub('>', ttytype_sbbuf + 2,
523                                         sizeof ttytype_sbbuf - 2););
524     }
525     if (his_state_is_will(TELOPT_TSPEED)) {
526         while (sequenceIs(tspeedsubopt, baseline))
527             ttloop();
528     }
529     if (his_state_is_will(TELOPT_XDISPLOC)) {
530         while (sequenceIs(xdisplocsubopt, baseline))
531             ttloop();
532     }
533     if (his_state_is_will(TELOPT_NEW_ENVIRON)) {
534         while (sequenceIs(environsubopt, baseline))
535             ttloop();
536     }
537     if (his_state_is_will(TELOPT_OLD_ENVIRON)) {
538         while (sequenceIs(oenvironsubopt, baseline))
539             ttloop();
540     }
541     if (his_state_is_will(TELOPT_TTYPE)) {
542         char first[256], last[256];
543
544         while (sequenceIs(ttypesubopt, baseline))
545             ttloop();
546
547         /*
548          * If the other side has already disabled the option, then
549          * we have to just go with what we (might) have already gotten.
550          */
551         if (his_state_is_will(TELOPT_TTYPE) && !terminaltypeok(terminaltype)) {
552             (void) strncpy(first, terminaltype, sizeof(first)-1);
553             first[sizeof(first)-1] = '\0';
554             for(;;) {
555                 /*
556                  * Save the unknown name, and request the next name.
557                  */
558                 (void) strncpy(last, terminaltype, sizeof(last)-1);
559                 last[sizeof(last)-1] = '\0';
560                 _gettermname();
561                 if (terminaltypeok(terminaltype))
562                     break;
563                 if ((strncmp(last, terminaltype, sizeof(last)) == 0) ||
564                     his_state_is_wont(TELOPT_TTYPE)) {
565                     /*
566                      * We've hit the end.  If this is the same as
567                      * the first name, just go with it.
568                      */
569                     if (strncmp(first, terminaltype, sizeof(first)) == 0)
570                         break;
571                     /*
572                      * Get the terminal name one more time, so that
573                      * RFC1091 compliant telnets will cycle back to
574                      * the start of the list.
575                      */
576                      _gettermname();
577                     if (strncmp(first, terminaltype, sizeof(first)) != 0) {
578                         (void) strncpy(terminaltype, first, TERMINAL_TYPE_SIZE-1);
579                         terminaltype[TERMINAL_TYPE_SIZE-1] = '\0';
580                     }
581                     break;
582                 }
583             }
584         }
585     }
586     return(retval);
587 }  /* end of getterminaltype */
588
589 static void
590 _gettermname(void)
591 {
592     /*
593      * If the client turned off the option,
594      * we can't send another request, so we
595      * just return.
596      */
597     if (his_state_is_wont(TELOPT_TTYPE))
598         return;
599     settimer(baseline);
600     output_datalen(ttytype_sbbuf, sizeof ttytype_sbbuf);
601     DIAG(TD_OPTIONS, printsub('>', ttytype_sbbuf + 2,
602                                         sizeof ttytype_sbbuf - 2););
603     while (sequenceIs(ttypesubopt, baseline))
604         ttloop();
605 }
606
607 int
608 terminaltypeok(char *s)
609 {
610     char buf[1024];
611
612     if (terminaltype == NULL)
613         return(1);
614
615     /*
616      * tgetent() will return 1 if the type is known, and
617      * 0 if it is not known.  If it returns -1, it couldn't
618      * open the database.  But if we can't open the database,
619      * it won't help to say we failed, because we won't be
620      * able to verify anything else.  So, we treat -1 like 1.
621      */
622     if (tgetent(buf, s) == 0)
623         return(0);
624     return(1);
625 }
626
627 /*
628  * Get a pty, scan input lines.
629  */
630 void
631 doit(struct sockaddr *who)
632 {
633         int ptynum;
634
635         /*
636          * Find an available pty to use.
637          */
638 #ifndef convex
639         pty = getpty(&ptynum);
640         if (pty < 0)
641                 fatalmsg(net, "All network ports in use");
642 #else
643         for (;;) {
644                 char *lp;
645
646                 if ((lp = getpty()) == NULL)
647                         fatalmsg(net, "Out of ptys");
648
649                 if ((pty = open(lp, 2)) >= 0) {
650                         strlcpy(line,lp,sizeof(line));
651                         line[5] = 't';
652                         break;
653                 }
654         }
655 #endif
656
657         /* get name of connected client */
658         if (realhostname_sa(remote_hostname, sizeof(remote_hostname) - 1,
659             who, who->sa_len) == HOSTNAME_INVALIDADDR && registerd_host_only)
660                 fatalmsg(net, "Couldn't resolve your address into a host name.\r\n\
661         Please contact your net administrator");
662         remote_hostname[sizeof(remote_hostname) - 1] = '\0';
663
664         (void) gethostname(host_name, sizeof(host_name) - 1);
665         host_name[sizeof(host_name) - 1] = '\0';
666         hostname = host_name;
667
668 #ifdef  AUTHENTICATION
669 #ifdef  ENCRYPTION
670 /* The above #ifdefs should actually be "or"'ed, not "and"'ed.
671  * This is a byproduct of needing "#ifdef" and not "#if defined()"
672  * for unifdef. XXX MarkM
673  */
674         auth_encrypt_init(hostname, remote_hostname, "TELNETD", 1);
675 #endif
676 #endif
677
678         init_env();
679         /*
680          * get terminal type.
681          */
682         *user_name = 0;
683         level = getterminaltype(user_name);
684         if (setenv("TERM", terminaltype ? terminaltype : "network", 1) == -1)
685                 syslog(LOG_ERR, "setenv: cannot set TERM=%s: %m", terminaltype ? terminaltype : "network");
686
687         telnet(net, pty, remote_hostname);      /* begin server process */
688
689         /*NOTREACHED*/
690 }  /* end of doit */
691
692 /*
693  * Main loop.  Select from pty and network, and
694  * hand data to telnet receiver finite state machine.
695  */
696 void
697 telnet(int f, int p, char *host)
698 {
699         int on = 1;
700 #define TABBUFSIZ       512
701         char    defent[TABBUFSIZ];
702         char    defstrs[TABBUFSIZ];
703 #undef  TABBUFSIZ
704         char *HE;
705         char *HN;
706         char *IM;
707         int nfd;
708
709         /*
710          * Initialize the slc mapping table.
711          */
712         get_slc_defaults();
713
714         /*
715          * Do some tests where it is desireable to wait for a response.
716          * Rather than doing them slowly, one at a time, do them all
717          * at once.
718          */
719         if (my_state_is_wont(TELOPT_SGA))
720                 send_will(TELOPT_SGA, 1);
721         /*
722          * Is the client side a 4.2 (NOT 4.3) system?  We need to know this
723          * because 4.2 clients are unable to deal with TCP urgent data.
724          *
725          * To find out, we send out a "DO ECHO".  If the remote system
726          * answers "WILL ECHO" it is probably a 4.2 client, and we note
727          * that fact ("WILL ECHO" ==> that the client will echo what
728          * WE, the server, sends it; it does NOT mean that the client will
729          * echo the terminal input).
730          */
731         send_do(TELOPT_ECHO, 1);
732
733 #ifdef  LINEMODE
734         if (his_state_is_wont(TELOPT_LINEMODE)) {
735                 /* Query the peer for linemode support by trying to negotiate
736                  * the linemode option.
737                  */
738                 linemode = 0;
739                 editmode = 0;
740                 send_do(TELOPT_LINEMODE, 1);  /* send do linemode */
741         }
742 #endif  /* LINEMODE */
743
744         /*
745          * Send along a couple of other options that we wish to negotiate.
746          */
747         send_do(TELOPT_NAWS, 1);
748         send_will(TELOPT_STATUS, 1);
749         flowmode = 1;           /* default flow control state */
750         restartany = -1;        /* uninitialized... */
751         send_do(TELOPT_LFLOW, 1);
752
753         /*
754          * Spin, waiting for a response from the DO ECHO.  However,
755          * some REALLY DUMB telnets out there might not respond
756          * to the DO ECHO.  So, we spin looking for NAWS, (most dumb
757          * telnets so far seem to respond with WONT for a DO that
758          * they don't understand...) because by the time we get the
759          * response, it will already have processed the DO ECHO.
760          * Kludge upon kludge.
761          */
762         while (his_will_wont_is_changing(TELOPT_NAWS))
763                 ttloop();
764
765         /*
766          * But...
767          * The client might have sent a WILL NAWS as part of its
768          * startup code; if so, we'll be here before we get the
769          * response to the DO ECHO.  We'll make the assumption
770          * that any implementation that understands about NAWS
771          * is a modern enough implementation that it will respond
772          * to our DO ECHO request; hence we'll do another spin
773          * waiting for the ECHO option to settle down, which is
774          * what we wanted to do in the first place...
775          */
776         if (his_want_state_is_will(TELOPT_ECHO) &&
777             his_state_is_will(TELOPT_NAWS)) {
778                 while (his_will_wont_is_changing(TELOPT_ECHO))
779                         ttloop();
780         }
781         /*
782          * On the off chance that the telnet client is broken and does not
783          * respond to the DO ECHO we sent, (after all, we did send the
784          * DO NAWS negotiation after the DO ECHO, and we won't get here
785          * until a response to the DO NAWS comes back) simulate the
786          * receipt of a will echo.  This will also send a WONT ECHO
787          * to the client, since we assume that the client failed to
788          * respond because it believes that it is already in DO ECHO
789          * mode, which we do not want.
790          */
791         if (his_want_state_is_will(TELOPT_ECHO)) {
792                 DIAG(TD_OPTIONS, output_data("td: simulating recv\r\n"));
793                 willoption(TELOPT_ECHO);
794         }
795
796         /*
797          * Finally, to clean things up, we turn on our echo.  This
798          * will break stupid 4.2 telnets out of local terminal echo.
799          */
800
801         if (my_state_is_wont(TELOPT_ECHO))
802                 send_will(TELOPT_ECHO, 1);
803
804         /*
805          * Turn on packet mode
806          */
807         (void) ioctl(p, TIOCPKT, (char *)&on);
808
809 #if     defined(LINEMODE) && defined(KLUDGELINEMODE)
810         /*
811          * Continuing line mode support.  If client does not support
812          * real linemode, attempt to negotiate kludge linemode by sending
813          * the do timing mark sequence.
814          */
815         if (lmodetype < REAL_LINEMODE)
816                 send_do(TELOPT_TM, 1);
817 #endif  /* defined(LINEMODE) && defined(KLUDGELINEMODE) */
818
819         /*
820          * Call telrcv() once to pick up anything received during
821          * terminal type negotiation, 4.2/4.3 determination, and
822          * linemode negotiation.
823          */
824         telrcv();
825
826         (void) ioctl(f, FIONBIO, (char *)&on);
827         (void) ioctl(p, FIONBIO, (char *)&on);
828
829 #if     defined(SO_OOBINLINE)
830         (void) setsockopt(net, SOL_SOCKET, SO_OOBINLINE,
831                                 (char *)&on, sizeof on);
832 #endif  /* defined(SO_OOBINLINE) */
833
834 #ifdef  SIGTSTP
835         (void) signal(SIGTSTP, SIG_IGN);
836 #endif
837 #ifdef  SIGTTOU
838         /*
839          * Ignoring SIGTTOU keeps the kernel from blocking us
840          * in ttioct() in /sys/tty.c.
841          */
842         (void) signal(SIGTTOU, SIG_IGN);
843 #endif
844
845         (void) signal(SIGCHLD, cleanup);
846
847 #ifdef  TIOCNOTTY
848         {
849                 int t;
850                 t = open(_PATH_TTY, O_RDWR);
851                 if (t >= 0) {
852                         (void) ioctl(t, TIOCNOTTY, NULL);
853                         (void) close(t);
854                 }
855         }
856 #endif
857
858         /*
859          * Show banner that getty never gave.
860          *
861          * We put the banner in the pty input buffer.  This way, it
862          * gets carriage return null processing, etc., just like all
863          * other pty --> client data.
864          */
865
866         if (getent(defent, "default") == 1) {
867                 char *cp=defstrs;
868
869                 HE = Getstr("he", &cp);
870                 HN = Getstr("hn", &cp);
871                 IM = Getstr("im", &cp);
872                 if (HN && *HN)
873                         (void) strlcpy(host_name, HN, sizeof(host_name));
874                 if (IM == NULL)
875                         IM = strdup("");
876         } else {
877                 IM = strdup(DEFAULT_IM);
878                 HE = NULL;
879         }
880         edithost(HE, host_name);
881         if (hostinfo && *IM)
882                 putf(IM, ptyibuf2);
883
884         if (pcc)
885                 (void) strncat(ptyibuf2, ptyip, pcc+1);
886         ptyip = ptyibuf2;
887         pcc = strlen(ptyip);
888 #ifdef  LINEMODE
889         /*
890          * Last check to make sure all our states are correct.
891          */
892         init_termbuf();
893         localstat();
894 #endif  /* LINEMODE */
895
896         DIAG(TD_REPORT, output_data("td: Entering processing loop\r\n"));
897
898         /*
899          * Startup the login process on the slave side of the terminal
900          * now.  We delay this until here to insure option negotiation
901          * is complete.
902          */
903         startslave(host, level, user_name);
904
905         nfd = ((f > p) ? f : p) + 1;
906         for (;;) {
907                 fd_set ibits, obits, xbits;
908                 int c;
909
910                 if (ncc < 0 && pcc < 0)
911                         break;
912
913                 FD_ZERO(&ibits);
914                 FD_ZERO(&obits);
915                 FD_ZERO(&xbits);
916                 /*
917                  * Never look for input if there's still
918                  * stuff in the corresponding output buffer
919                  */
920                 if (nfrontp - nbackp || pcc > 0) {
921                         FD_SET(f, &obits);
922                 } else {
923                         FD_SET(p, &ibits);
924                 }
925                 if (pfrontp - pbackp || ncc > 0) {
926                         FD_SET(p, &obits);
927                 } else {
928                         FD_SET(f, &ibits);
929                 }
930                 if (!SYNCHing) {
931                         FD_SET(f, &xbits);
932                 }
933                 if ((c = select(nfd, &ibits, &obits, &xbits, NULL)) < 1) {
934                         if (c == -1) {
935                                 if (errno == EINTR) {
936                                         continue;
937                                 }
938                         }
939                         sleep(5);
940                         continue;
941                 }
942
943                 /*
944                  * Any urgent data?
945                  */
946                 if (FD_ISSET(net, &xbits)) {
947                     SYNCHing = 1;
948                 }
949
950                 /*
951                  * Something to read from the network...
952                  */
953                 if (FD_ISSET(net, &ibits)) {
954 #if     !defined(SO_OOBINLINE)
955                         /*
956                          * In 4.2 (and 4.3 beta) systems, the
957                          * OOB indication and data handling in the kernel
958                          * is such that if two separate TCP Urgent requests
959                          * come in, one byte of TCP data will be overlaid.
960                          * This is fatal for Telnet, but we try to live
961                          * with it.
962                          *
963                          * In addition, in 4.2 (and...), a special protocol
964                          * is needed to pick up the TCP Urgent data in
965                          * the correct sequence.
966                          *
967                          * What we do is:  if we think we are in urgent
968                          * mode, we look to see if we are "at the mark".
969                          * If we are, we do an OOB receive.  If we run
970                          * this twice, we will do the OOB receive twice,
971                          * but the second will fail, since the second
972                          * time we were "at the mark", but there wasn't
973                          * any data there (the kernel doesn't reset
974                          * "at the mark" until we do a normal read).
975                          * Once we've read the OOB data, we go ahead
976                          * and do normal reads.
977                          *
978                          * There is also another problem, which is that
979                          * since the OOB byte we read doesn't put us
980                          * out of OOB state, and since that byte is most
981                          * likely the TELNET DM (data mark), we would
982                          * stay in the TELNET SYNCH (SYNCHing) state.
983                          * So, clocks to the rescue.  If we've "just"
984                          * received a DM, then we test for the
985                          * presence of OOB data when the receive OOB
986                          * fails (and AFTER we did the normal mode read
987                          * to clear "at the mark").
988                          */
989                     if (SYNCHing) {
990                         int atmark;
991
992                         (void) ioctl(net, SIOCATMARK, (char *)&atmark);
993                         if (atmark) {
994                             ncc = recv(net, netibuf, sizeof (netibuf), MSG_OOB);
995                             if ((ncc == -1) && (errno == EINVAL)) {
996                                 ncc = read(net, netibuf, sizeof (netibuf));
997                                 if (sequenceIs(didnetreceive, gotDM)) {
998                                     SYNCHing = stilloob(net);
999                                 }
1000                             }
1001                         } else {
1002                             ncc = read(net, netibuf, sizeof (netibuf));
1003                         }
1004                     } else {
1005                         ncc = read(net, netibuf, sizeof (netibuf));
1006                     }
1007                     settimer(didnetreceive);
1008 #else   /* !defined(SO_OOBINLINE)) */
1009                     ncc = read(net, netibuf, sizeof (netibuf));
1010 #endif  /* !defined(SO_OOBINLINE)) */
1011                     if (ncc < 0 && errno == EWOULDBLOCK)
1012                         ncc = 0;
1013                     else {
1014                         if (ncc <= 0) {
1015                             break;
1016                         }
1017                         netip = netibuf;
1018                     }
1019                     DIAG((TD_REPORT | TD_NETDATA),
1020                         output_data("td: netread %d chars\r\n", ncc));
1021                     DIAG(TD_NETDATA, printdata("nd", netip, ncc));
1022                 }
1023
1024                 /*
1025                  * Something to read from the pty...
1026                  */
1027                 if (FD_ISSET(p, &ibits)) {
1028                         pcc = read(p, ptyibuf, BUFSIZ);
1029                         /*
1030                          * On some systems, if we try to read something
1031                          * off the master side before the slave side is
1032                          * opened, we get EIO.
1033                          */
1034                         if (pcc < 0 && (errno == EWOULDBLOCK ||
1035 #ifdef  EAGAIN
1036                                         errno == EAGAIN ||
1037 #endif
1038                                         errno == EIO)) {
1039                                 pcc = 0;
1040                         } else {
1041                                 if (pcc <= 0)
1042                                         break;
1043 #ifdef  LINEMODE
1044                                 /*
1045                                  * If ioctl from pty, pass it through net
1046                                  */
1047                                 if (ptyibuf[0] & TIOCPKT_IOCTL) {
1048                                         copy_termbuf(ptyibuf+1, pcc-1);
1049                                         localstat();
1050                                         pcc = 1;
1051                                 }
1052 #endif  /* LINEMODE */
1053                                 if (ptyibuf[0] & TIOCPKT_FLUSHWRITE) {
1054                                         netclear();     /* clear buffer back */
1055 #ifndef NO_URGENT
1056                                         /*
1057                                          * There are client telnets on some
1058                                          * operating systems get screwed up
1059                                          * royally if we send them urgent
1060                                          * mode data.
1061                                          */
1062                                         output_data("%c%c", IAC, DM);
1063                                         neturg = nfrontp-1; /* off by one XXX */
1064                                         DIAG(TD_OPTIONS,
1065                                             printoption("td: send IAC", DM));
1066
1067 #endif
1068                                 }
1069                                 if (his_state_is_will(TELOPT_LFLOW) &&
1070                                     (ptyibuf[0] &
1071                                      (TIOCPKT_NOSTOP|TIOCPKT_DOSTOP))) {
1072                                         int newflow =
1073                                             ptyibuf[0] & TIOCPKT_DOSTOP ? 1 : 0;
1074                                         if (newflow != flowmode) {
1075                                                 flowmode = newflow;
1076                                                 output_data("%c%c%c%c%c%c",
1077                                                         IAC, SB, TELOPT_LFLOW,
1078                                                         flowmode ? LFLOW_ON
1079                                                                  : LFLOW_OFF,
1080                                                         IAC, SE);
1081                                                 DIAG(TD_OPTIONS, printsub('>',
1082                                                     (unsigned char *)nfrontp-4,
1083                                                     4););
1084                                         }
1085                                 }
1086                                 pcc--;
1087                                 ptyip = ptyibuf+1;
1088                         }
1089                 }
1090
1091                 while (pcc > 0) {
1092                         if ((&netobuf[BUFSIZ] - nfrontp) < 2)
1093                                 break;
1094                         c = *ptyip++ & 0377, pcc--;
1095                         if (c == IAC)
1096                                 output_data("%c", c);
1097                         output_data("%c", c);
1098                         if ((c == '\r') && (my_state_is_wont(TELOPT_BINARY))) {
1099                                 if (pcc > 0 && ((*ptyip & 0377) == '\n')) {
1100                                         output_data("%c", *ptyip++ & 0377);
1101                                         pcc--;
1102                                 } else
1103                                         output_data("%c", '\0');
1104                         }
1105                 }
1106
1107                 if (FD_ISSET(f, &obits) && (nfrontp - nbackp) > 0)
1108                         netflush();
1109                 if (ncc > 0)
1110                         telrcv();
1111                 if (FD_ISSET(p, &obits) && (pfrontp - pbackp) > 0)
1112                         ptyflush();
1113         }
1114         cleanup(0);
1115 }  /* end of telnet */
1116
1117 #ifndef TCSIG
1118 # ifdef TIOCSIG
1119 #  define TCSIG TIOCSIG
1120 # endif
1121 #endif
1122
1123 /*
1124  * Send interrupt to process on other side of pty.
1125  * If it is in raw mode, just write NULL;
1126  * otherwise, write intr char.
1127  */
1128 void
1129 interrupt(void)
1130 {
1131         ptyflush();     /* half-hearted */
1132
1133 #ifdef  TCSIG
1134         (void) ioctl(pty, TCSIG, (char *)SIGINT);
1135 #else   /* TCSIG */
1136         init_termbuf();
1137         *pfrontp++ = slctab[SLC_IP].sptr ?
1138                         (unsigned char)*slctab[SLC_IP].sptr : '\177';
1139 #endif  /* TCSIG */
1140 }
1141
1142 /*
1143  * Send quit to process on other side of pty.
1144  * If it is in raw mode, just write NULL;
1145  * otherwise, write quit char.
1146  */
1147 void
1148 sendbrk(void)
1149 {
1150         ptyflush();     /* half-hearted */
1151 #ifdef  TCSIG
1152         (void) ioctl(pty, TCSIG, (char *)SIGQUIT);
1153 #else   /* TCSIG */
1154         init_termbuf();
1155         *pfrontp++ = slctab[SLC_ABORT].sptr ?
1156                         (unsigned char)*slctab[SLC_ABORT].sptr : '\034';
1157 #endif  /* TCSIG */
1158 }
1159
1160 void
1161 sendsusp(void)
1162 {
1163 #ifdef  SIGTSTP
1164         ptyflush();     /* half-hearted */
1165 # ifdef TCSIG
1166         (void) ioctl(pty, TCSIG, (char *)SIGTSTP);
1167 # else  /* TCSIG */
1168         *pfrontp++ = slctab[SLC_SUSP].sptr ?
1169                         (unsigned char)*slctab[SLC_SUSP].sptr : '\032';
1170 # endif /* TCSIG */
1171 #endif  /* SIGTSTP */
1172 }
1173
1174 /*
1175  * When we get an AYT, if ^T is enabled, use that.  Otherwise,
1176  * just send back "[Yes]".
1177  */
1178 void
1179 recv_ayt(void)
1180 {
1181 #if     defined(SIGINFO) && defined(TCSIG)
1182         if (slctab[SLC_AYT].sptr && *slctab[SLC_AYT].sptr != _POSIX_VDISABLE) {
1183                 (void) ioctl(pty, TCSIG, (char *)SIGINFO);
1184                 return;
1185         }
1186 #endif
1187         output_data("\r\n[Yes]\r\n");
1188 }
1189
1190 void
1191 doeof(void)
1192 {
1193         init_termbuf();
1194
1195 #if     defined(LINEMODE) && defined(USE_TERMIO) && (VEOF == VMIN)
1196         if (!tty_isediting()) {
1197                 extern char oldeofc;
1198                 *pfrontp++ = oldeofc;
1199                 return;
1200         }
1201 #endif
1202         *pfrontp++ = slctab[SLC_EOF].sptr ?
1203                         (unsigned char)*slctab[SLC_EOF].sptr : '\004';
1204 }