Sync ACPICA with Intel's version 20150204.
[dragonfly.git] / sys / contrib / dev / acpica / source / components / utilities / utresrc.c
1 /*******************************************************************************
2  *
3  * Module Name: utresrc - Resource management utilities
4  *
5  ******************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2015, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include "acpi.h"
45 #include "accommon.h"
46 #include "acresrc.h"
47
48
49 #define _COMPONENT          ACPI_UTILITIES
50         ACPI_MODULE_NAME    ("utresrc")
51
52
53 #if defined(ACPI_DEBUG_OUTPUT) || defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
54
55 /*
56  * Strings used to decode resource descriptors.
57  * Used by both the disassembler and the debugger resource dump routines
58  */
59 const char                      *AcpiGbl_BmDecode[] =
60 {
61     "NotBusMaster",
62     "BusMaster"
63 };
64
65 const char                      *AcpiGbl_ConfigDecode[] =
66 {
67     "0 - Good Configuration",
68     "1 - Acceptable Configuration",
69     "2 - Suboptimal Configuration",
70     "3 - ***Invalid Configuration***",
71 };
72
73 const char                      *AcpiGbl_ConsumeDecode[] =
74 {
75     "ResourceProducer",
76     "ResourceConsumer"
77 };
78
79 const char                      *AcpiGbl_DecDecode[] =
80 {
81     "PosDecode",
82     "SubDecode"
83 };
84
85 const char                      *AcpiGbl_HeDecode[] =
86 {
87     "Level",
88     "Edge"
89 };
90
91 const char                      *AcpiGbl_IoDecode[] =
92 {
93     "Decode10",
94     "Decode16"
95 };
96
97 const char                      *AcpiGbl_LlDecode[] =
98 {
99     "ActiveHigh",
100     "ActiveLow",
101     "ActiveBoth",
102     "Reserved"
103 };
104
105 const char                      *AcpiGbl_MaxDecode[] =
106 {
107     "MaxNotFixed",
108     "MaxFixed"
109 };
110
111 const char                      *AcpiGbl_MemDecode[] =
112 {
113     "NonCacheable",
114     "Cacheable",
115     "WriteCombining",
116     "Prefetchable"
117 };
118
119 const char                      *AcpiGbl_MinDecode[] =
120 {
121     "MinNotFixed",
122     "MinFixed"
123 };
124
125 const char                      *AcpiGbl_MtpDecode[] =
126 {
127     "AddressRangeMemory",
128     "AddressRangeReserved",
129     "AddressRangeACPI",
130     "AddressRangeNVS"
131 };
132
133 const char                      *AcpiGbl_RngDecode[] =
134 {
135     "InvalidRanges",
136     "NonISAOnlyRanges",
137     "ISAOnlyRanges",
138     "EntireRange"
139 };
140
141 const char                      *AcpiGbl_RwDecode[] =
142 {
143     "ReadOnly",
144     "ReadWrite"
145 };
146
147 const char                      *AcpiGbl_ShrDecode[] =
148 {
149     "Exclusive",
150     "Shared",
151     "ExclusiveAndWake",         /* ACPI 5.0 */
152     "SharedAndWake"             /* ACPI 5.0 */
153 };
154
155 const char                      *AcpiGbl_SizDecode[] =
156 {
157     "Transfer8",
158     "Transfer8_16",
159     "Transfer16",
160     "InvalidSize"
161 };
162
163 const char                      *AcpiGbl_TrsDecode[] =
164 {
165     "DenseTranslation",
166     "SparseTranslation"
167 };
168
169 const char                      *AcpiGbl_TtpDecode[] =
170 {
171     "TypeStatic",
172     "TypeTranslation"
173 };
174
175 const char                      *AcpiGbl_TypDecode[] =
176 {
177     "Compatibility",
178     "TypeA",
179     "TypeB",
180     "TypeF"
181 };
182
183 const char                      *AcpiGbl_PpcDecode[] =
184 {
185     "PullDefault",
186     "PullUp",
187     "PullDown",
188     "PullNone"
189 };
190
191 const char                      *AcpiGbl_IorDecode[] =
192 {
193     "IoRestrictionNone",
194     "IoRestrictionInputOnly",
195     "IoRestrictionOutputOnly",
196     "IoRestrictionNoneAndPreserve"
197 };
198
199 const char                      *AcpiGbl_DtsDecode[] =
200 {
201     "Width8bit",
202     "Width16bit",
203     "Width32bit",
204     "Width64bit",
205     "Width128bit",
206     "Width256bit",
207 };
208
209 /* GPIO connection type */
210
211 const char                      *AcpiGbl_CtDecode[] =
212 {
213     "Interrupt",
214     "I/O"
215 };
216
217 /* Serial bus type */
218
219 const char                      *AcpiGbl_SbtDecode[] =
220 {
221     "/* UNKNOWN serial bus type */",
222     "I2C",
223     "SPI",
224     "UART"
225 };
226
227 /* I2C serial bus access mode */
228
229 const char                      *AcpiGbl_AmDecode[] =
230 {
231     "AddressingMode7Bit",
232     "AddressingMode10Bit"
233 };
234
235 /* I2C serial bus slave mode */
236
237 const char                      *AcpiGbl_SmDecode[] =
238 {
239     "ControllerInitiated",
240     "DeviceInitiated"
241 };
242
243 /* SPI serial bus wire mode */
244
245 const char                      *AcpiGbl_WmDecode[] =
246 {
247     "FourWireMode",
248     "ThreeWireMode"
249 };
250
251 /* SPI serial clock phase */
252
253 const char                      *AcpiGbl_CphDecode[] =
254 {
255     "ClockPhaseFirst",
256     "ClockPhaseSecond"
257 };
258
259 /* SPI serial bus clock polarity */
260
261 const char                      *AcpiGbl_CpoDecode[] =
262 {
263     "ClockPolarityLow",
264     "ClockPolarityHigh"
265 };
266
267 /* SPI serial bus device polarity */
268
269 const char                      *AcpiGbl_DpDecode[] =
270 {
271     "PolarityLow",
272     "PolarityHigh"
273 };
274
275 /* UART serial bus endian */
276
277 const char                      *AcpiGbl_EdDecode[] =
278 {
279     "LittleEndian",
280     "BigEndian"
281 };
282
283 /* UART serial bus bits per byte */
284
285 const char                      *AcpiGbl_BpbDecode[] =
286 {
287     "DataBitsFive",
288     "DataBitsSix",
289     "DataBitsSeven",
290     "DataBitsEight",
291     "DataBitsNine",
292     "/* UNKNOWN Bits per byte */",
293     "/* UNKNOWN Bits per byte */",
294     "/* UNKNOWN Bits per byte */"
295 };
296
297 /* UART serial bus stop bits */
298
299 const char                      *AcpiGbl_SbDecode[] =
300 {
301     "StopBitsZero",
302     "StopBitsOne",
303     "StopBitsOnePlusHalf",
304     "StopBitsTwo"
305 };
306
307 /* UART serial bus flow control */
308
309 const char                      *AcpiGbl_FcDecode[] =
310 {
311     "FlowControlNone",
312     "FlowControlHardware",
313     "FlowControlXON",
314     "/* UNKNOWN flow control keyword */"
315 };
316
317 /* UART serial bus parity type */
318
319 const char                      *AcpiGbl_PtDecode[] =
320 {
321     "ParityTypeNone",
322     "ParityTypeEven",
323     "ParityTypeOdd",
324     "ParityTypeMark",
325     "ParityTypeSpace",
326     "/* UNKNOWN parity keyword */",
327     "/* UNKNOWN parity keyword */",
328     "/* UNKNOWN parity keyword */"
329 };
330
331 #endif
332
333
334 /*
335  * Base sizes of the raw AML resource descriptors, indexed by resource type.
336  * Zero indicates a reserved (and therefore invalid) resource type.
337  */
338 const UINT8                 AcpiGbl_ResourceAmlSizes[] =
339 {
340     /* Small descriptors */
341
342     0,
343     0,
344     0,
345     0,
346     ACPI_AML_SIZE_SMALL (AML_RESOURCE_IRQ),
347     ACPI_AML_SIZE_SMALL (AML_RESOURCE_DMA),
348     ACPI_AML_SIZE_SMALL (AML_RESOURCE_START_DEPENDENT),
349     ACPI_AML_SIZE_SMALL (AML_RESOURCE_END_DEPENDENT),
350     ACPI_AML_SIZE_SMALL (AML_RESOURCE_IO),
351     ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_IO),
352     ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_DMA),
353     0,
354     0,
355     0,
356     ACPI_AML_SIZE_SMALL (AML_RESOURCE_VENDOR_SMALL),
357     ACPI_AML_SIZE_SMALL (AML_RESOURCE_END_TAG),
358
359     /* Large descriptors */
360
361     0,
362     ACPI_AML_SIZE_LARGE (AML_RESOURCE_MEMORY24),
363     ACPI_AML_SIZE_LARGE (AML_RESOURCE_GENERIC_REGISTER),
364     0,
365     ACPI_AML_SIZE_LARGE (AML_RESOURCE_VENDOR_LARGE),
366     ACPI_AML_SIZE_LARGE (AML_RESOURCE_MEMORY32),
367     ACPI_AML_SIZE_LARGE (AML_RESOURCE_FIXED_MEMORY32),
368     ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS32),
369     ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS16),
370     ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_IRQ),
371     ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS64),
372     ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_ADDRESS64),
373     ACPI_AML_SIZE_LARGE (AML_RESOURCE_GPIO),
374     0,
375     ACPI_AML_SIZE_LARGE (AML_RESOURCE_COMMON_SERIALBUS),
376 };
377
378 const UINT8                 AcpiGbl_ResourceAmlSerialBusSizes[] =
379 {
380     0,
381     ACPI_AML_SIZE_LARGE (AML_RESOURCE_I2C_SERIALBUS),
382     ACPI_AML_SIZE_LARGE (AML_RESOURCE_SPI_SERIALBUS),
383     ACPI_AML_SIZE_LARGE (AML_RESOURCE_UART_SERIALBUS),
384 };
385
386
387 /*
388  * Resource types, used to validate the resource length field.
389  * The length of fixed-length types must match exactly, variable
390  * lengths must meet the minimum required length, etc.
391  * Zero indicates a reserved (and therefore invalid) resource type.
392  */
393 static const UINT8          AcpiGbl_ResourceTypes[] =
394 {
395     /* Small descriptors */
396
397     0,
398     0,
399     0,
400     0,
401     ACPI_SMALL_VARIABLE_LENGTH,     /* 04 IRQ */
402     ACPI_FIXED_LENGTH,              /* 05 DMA */
403     ACPI_SMALL_VARIABLE_LENGTH,     /* 06 StartDependentFunctions */
404     ACPI_FIXED_LENGTH,              /* 07 EndDependentFunctions */
405     ACPI_FIXED_LENGTH,              /* 08 IO */
406     ACPI_FIXED_LENGTH,              /* 09 FixedIO */
407     ACPI_FIXED_LENGTH,              /* 0A FixedDMA */
408     0,
409     0,
410     0,
411     ACPI_VARIABLE_LENGTH,           /* 0E VendorShort */
412     ACPI_FIXED_LENGTH,              /* 0F EndTag */
413
414     /* Large descriptors */
415
416     0,
417     ACPI_FIXED_LENGTH,              /* 01 Memory24 */
418     ACPI_FIXED_LENGTH,              /* 02 GenericRegister */
419     0,
420     ACPI_VARIABLE_LENGTH,           /* 04 VendorLong */
421     ACPI_FIXED_LENGTH,              /* 05 Memory32 */
422     ACPI_FIXED_LENGTH,              /* 06 Memory32Fixed */
423     ACPI_VARIABLE_LENGTH,           /* 07 Dword* address */
424     ACPI_VARIABLE_LENGTH,           /* 08 Word* address */
425     ACPI_VARIABLE_LENGTH,           /* 09 ExtendedIRQ */
426     ACPI_VARIABLE_LENGTH,           /* 0A Qword* address */
427     ACPI_FIXED_LENGTH,              /* 0B Extended* address */
428     ACPI_VARIABLE_LENGTH,           /* 0C Gpio* */
429     0,
430     ACPI_VARIABLE_LENGTH            /* 0E *SerialBus */
431 };
432
433
434 /*******************************************************************************
435  *
436  * FUNCTION:    AcpiUtWalkAmlResources
437  *
438  * PARAMETERS:  WalkState           - Current walk info
439  * PARAMETERS:  Aml                 - Pointer to the raw AML resource template
440  *              AmlLength           - Length of the entire template
441  *              UserFunction        - Called once for each descriptor found. If
442  *                                    NULL, a pointer to the EndTag is returned
443  *              Context             - Passed to UserFunction
444  *
445  * RETURN:      Status
446  *
447  * DESCRIPTION: Walk a raw AML resource list(buffer). User function called
448  *              once for each resource found.
449  *
450  ******************************************************************************/
451
452 ACPI_STATUS
453 AcpiUtWalkAmlResources (
454     ACPI_WALK_STATE         *WalkState,
455     UINT8                   *Aml,
456     ACPI_SIZE               AmlLength,
457     ACPI_WALK_AML_CALLBACK  UserFunction,
458     void                    **Context)
459 {
460     ACPI_STATUS             Status;
461     UINT8                   *EndAml;
462     UINT8                   ResourceIndex;
463     UINT32                  Length;
464     UINT32                  Offset = 0;
465     UINT8                   EndTag[2] = {0x79, 0x00};
466
467
468     ACPI_FUNCTION_TRACE (UtWalkAmlResources);
469
470
471     /* The absolute minimum resource template is one EndTag descriptor */
472
473     if (AmlLength < sizeof (AML_RESOURCE_END_TAG))
474     {
475         return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
476     }
477
478     /* Point to the end of the resource template buffer */
479
480     EndAml = Aml + AmlLength;
481
482     /* Walk the byte list, abort on any invalid descriptor type or length */
483
484     while (Aml < EndAml)
485     {
486         /* Validate the Resource Type and Resource Length */
487
488         Status = AcpiUtValidateResource (WalkState, Aml, &ResourceIndex);
489         if (ACPI_FAILURE (Status))
490         {
491             /*
492              * Exit on failure. Cannot continue because the descriptor length
493              * may be bogus also.
494              */
495             return_ACPI_STATUS (Status);
496         }
497
498         /* Get the length of this descriptor */
499
500         Length = AcpiUtGetDescriptorLength (Aml);
501
502         /* Invoke the user function */
503
504         if (UserFunction)
505         {
506             Status = UserFunction (Aml, Length, Offset, ResourceIndex, Context);
507             if (ACPI_FAILURE (Status))
508             {
509                 return_ACPI_STATUS (Status);
510             }
511         }
512
513         /* An EndTag descriptor terminates this resource template */
514
515         if (AcpiUtGetResourceType (Aml) == ACPI_RESOURCE_NAME_END_TAG)
516         {
517             /*
518              * There must be at least one more byte in the buffer for
519              * the 2nd byte of the EndTag
520              */
521             if ((Aml + 1) >= EndAml)
522             {
523                 return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
524             }
525
526             /* Return the pointer to the EndTag if requested */
527
528             if (!UserFunction)
529             {
530                 *Context = Aml;
531             }
532
533             /* Normal exit */
534
535             return_ACPI_STATUS (AE_OK);
536         }
537
538         Aml += Length;
539         Offset += Length;
540     }
541
542     /* Did not find an EndTag descriptor */
543
544     if (UserFunction)
545     {
546         /* Insert an EndTag anyway. AcpiRsGetListLength always leaves room */
547
548         (void) AcpiUtValidateResource (WalkState, EndTag, &ResourceIndex);
549         Status = UserFunction (EndTag, 2, Offset, ResourceIndex, Context);
550         if (ACPI_FAILURE (Status))
551         {
552             return_ACPI_STATUS (Status);
553         }
554     }
555
556     return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
557 }
558
559
560 /*******************************************************************************
561  *
562  * FUNCTION:    AcpiUtValidateResource
563  *
564  * PARAMETERS:  WalkState           - Current walk info
565  *              Aml                 - Pointer to the raw AML resource descriptor
566  *              ReturnIndex         - Where the resource index is returned. NULL
567  *                                    if the index is not required.
568  *
569  * RETURN:      Status, and optionally the Index into the global resource tables
570  *
571  * DESCRIPTION: Validate an AML resource descriptor by checking the Resource
572  *              Type and Resource Length. Returns an index into the global
573  *              resource information/dispatch tables for later use.
574  *
575  ******************************************************************************/
576
577 ACPI_STATUS
578 AcpiUtValidateResource (
579     ACPI_WALK_STATE         *WalkState,
580     void                    *Aml,
581     UINT8                   *ReturnIndex)
582 {
583     AML_RESOURCE            *AmlResource;
584     UINT8                   ResourceType;
585     UINT8                   ResourceIndex;
586     ACPI_RS_LENGTH          ResourceLength;
587     ACPI_RS_LENGTH          MinimumResourceLength;
588
589
590     ACPI_FUNCTION_ENTRY ();
591
592
593     /*
594      * 1) Validate the ResourceType field (Byte 0)
595      */
596     ResourceType = ACPI_GET8 (Aml);
597
598     /*
599      * Byte 0 contains the descriptor name (Resource Type)
600      * Examine the large/small bit in the resource header
601      */
602     if (ResourceType & ACPI_RESOURCE_NAME_LARGE)
603     {
604         /* Verify the large resource type (name) against the max */
605
606         if (ResourceType > ACPI_RESOURCE_NAME_LARGE_MAX)
607         {
608             goto InvalidResource;
609         }
610
611         /*
612          * Large Resource Type -- bits 6:0 contain the name
613          * Translate range 0x80-0x8B to index range 0x10-0x1B
614          */
615         ResourceIndex = (UINT8) (ResourceType - 0x70);
616     }
617     else
618     {
619         /*
620          * Small Resource Type -- bits 6:3 contain the name
621          * Shift range to index range 0x00-0x0F
622          */
623         ResourceIndex = (UINT8)
624             ((ResourceType & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3);
625     }
626
627     /*
628      * Check validity of the resource type, via AcpiGbl_ResourceTypes. Zero
629      * indicates an invalid resource.
630      */
631     if (!AcpiGbl_ResourceTypes[ResourceIndex])
632     {
633         goto InvalidResource;
634     }
635
636     /*
637      * Validate the ResourceLength field. This ensures that the length
638      * is at least reasonable, and guarantees that it is non-zero.
639      */
640     ResourceLength = AcpiUtGetResourceLength (Aml);
641     MinimumResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex];
642
643     /* Validate based upon the type of resource - fixed length or variable */
644
645     switch (AcpiGbl_ResourceTypes[ResourceIndex])
646     {
647     case ACPI_FIXED_LENGTH:
648
649         /* Fixed length resource, length must match exactly */
650
651         if (ResourceLength != MinimumResourceLength)
652         {
653             goto BadResourceLength;
654         }
655         break;
656
657     case ACPI_VARIABLE_LENGTH:
658
659         /* Variable length resource, length must be at least the minimum */
660
661         if (ResourceLength < MinimumResourceLength)
662         {
663             goto BadResourceLength;
664         }
665         break;
666
667     case ACPI_SMALL_VARIABLE_LENGTH:
668
669         /* Small variable length resource, length can be (Min) or (Min-1) */
670
671         if ((ResourceLength > MinimumResourceLength) ||
672             (ResourceLength < (MinimumResourceLength - 1)))
673         {
674             goto BadResourceLength;
675         }
676         break;
677
678     default:
679
680         /* Shouldn't happen (because of validation earlier), but be sure */
681
682         goto InvalidResource;
683     }
684
685     AmlResource = ACPI_CAST_PTR (AML_RESOURCE, Aml);
686     if (ResourceType == ACPI_RESOURCE_NAME_SERIAL_BUS)
687     {
688         /* Validate the BusType field */
689
690         if ((AmlResource->CommonSerialBus.Type == 0) ||
691             (AmlResource->CommonSerialBus.Type > AML_RESOURCE_MAX_SERIALBUSTYPE))
692         {
693             if (WalkState)
694             {
695                 ACPI_ERROR ((AE_INFO,
696                     "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X",
697                     AmlResource->CommonSerialBus.Type));
698             }
699             return (AE_AML_INVALID_RESOURCE_TYPE);
700         }
701     }
702
703     /* Optionally return the resource table index */
704
705     if (ReturnIndex)
706     {
707         *ReturnIndex = ResourceIndex;
708     }
709
710     return (AE_OK);
711
712
713 InvalidResource:
714
715     if (WalkState)
716     {
717         ACPI_ERROR ((AE_INFO,
718             "Invalid/unsupported resource descriptor: Type 0x%2.2X",
719             ResourceType));
720     }
721     return (AE_AML_INVALID_RESOURCE_TYPE);
722
723 BadResourceLength:
724
725     if (WalkState)
726     {
727         ACPI_ERROR ((AE_INFO,
728             "Invalid resource descriptor length: Type "
729             "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X",
730             ResourceType, ResourceLength, MinimumResourceLength));
731     }
732     return (AE_AML_BAD_RESOURCE_LENGTH);
733 }
734
735
736 /*******************************************************************************
737  *
738  * FUNCTION:    AcpiUtGetResourceType
739  *
740  * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
741  *
742  * RETURN:      The Resource Type with no extraneous bits (except the
743  *              Large/Small descriptor bit -- this is left alone)
744  *
745  * DESCRIPTION: Extract the Resource Type/Name from the first byte of
746  *              a resource descriptor.
747  *
748  ******************************************************************************/
749
750 UINT8
751 AcpiUtGetResourceType (
752     void                    *Aml)
753 {
754     ACPI_FUNCTION_ENTRY ();
755
756
757     /*
758      * Byte 0 contains the descriptor name (Resource Type)
759      * Examine the large/small bit in the resource header
760      */
761     if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE)
762     {
763         /* Large Resource Type -- bits 6:0 contain the name */
764
765         return (ACPI_GET8 (Aml));
766     }
767     else
768     {
769         /* Small Resource Type -- bits 6:3 contain the name */
770
771         return ((UINT8) (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_SMALL_MASK));
772     }
773 }
774
775
776 /*******************************************************************************
777  *
778  * FUNCTION:    AcpiUtGetResourceLength
779  *
780  * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
781  *
782  * RETURN:      Byte Length
783  *
784  * DESCRIPTION: Get the "Resource Length" of a raw AML descriptor. By
785  *              definition, this does not include the size of the descriptor
786  *              header or the length field itself.
787  *
788  ******************************************************************************/
789
790 UINT16
791 AcpiUtGetResourceLength (
792     void                    *Aml)
793 {
794     ACPI_RS_LENGTH          ResourceLength;
795
796
797     ACPI_FUNCTION_ENTRY ();
798
799
800     /*
801      * Byte 0 contains the descriptor name (Resource Type)
802      * Examine the large/small bit in the resource header
803      */
804     if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE)
805     {
806         /* Large Resource type -- bytes 1-2 contain the 16-bit length */
807
808         ACPI_MOVE_16_TO_16 (&ResourceLength, ACPI_ADD_PTR (UINT8, Aml, 1));
809
810     }
811     else
812     {
813         /* Small Resource type -- bits 2:0 of byte 0 contain the length */
814
815         ResourceLength = (UINT16) (ACPI_GET8 (Aml) &
816                                     ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK);
817     }
818
819     return (ResourceLength);
820 }
821
822
823 /*******************************************************************************
824  *
825  * FUNCTION:    AcpiUtGetResourceHeaderLength
826  *
827  * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
828  *
829  * RETURN:      Length of the AML header (depends on large/small descriptor)
830  *
831  * DESCRIPTION: Get the length of the header for this resource.
832  *
833  ******************************************************************************/
834
835 UINT8
836 AcpiUtGetResourceHeaderLength (
837     void                    *Aml)
838 {
839     ACPI_FUNCTION_ENTRY ();
840
841
842     /* Examine the large/small bit in the resource header */
843
844     if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE)
845     {
846         return (sizeof (AML_RESOURCE_LARGE_HEADER));
847     }
848     else
849     {
850         return (sizeof (AML_RESOURCE_SMALL_HEADER));
851     }
852 }
853
854
855 /*******************************************************************************
856  *
857  * FUNCTION:    AcpiUtGetDescriptorLength
858  *
859  * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
860  *
861  * RETURN:      Byte length
862  *
863  * DESCRIPTION: Get the total byte length of a raw AML descriptor, including the
864  *              length of the descriptor header and the length field itself.
865  *              Used to walk descriptor lists.
866  *
867  ******************************************************************************/
868
869 UINT32
870 AcpiUtGetDescriptorLength (
871     void                    *Aml)
872 {
873     ACPI_FUNCTION_ENTRY ();
874
875
876     /*
877      * Get the Resource Length (does not include header length) and add
878      * the header length (depends on if this is a small or large resource)
879      */
880     return (AcpiUtGetResourceLength (Aml) +
881             AcpiUtGetResourceHeaderLength (Aml));
882 }
883
884
885 /*******************************************************************************
886  *
887  * FUNCTION:    AcpiUtGetResourceEndTag
888  *
889  * PARAMETERS:  ObjDesc         - The resource template buffer object
890  *              EndTag          - Where the pointer to the EndTag is returned
891  *
892  * RETURN:      Status, pointer to the end tag
893  *
894  * DESCRIPTION: Find the EndTag resource descriptor in an AML resource template
895  *              Note: allows a buffer length of zero.
896  *
897  ******************************************************************************/
898
899 ACPI_STATUS
900 AcpiUtGetResourceEndTag (
901     ACPI_OPERAND_OBJECT     *ObjDesc,
902     UINT8                   **EndTag)
903 {
904     ACPI_STATUS             Status;
905
906
907     ACPI_FUNCTION_TRACE (UtGetResourceEndTag);
908
909
910     /* Allow a buffer length of zero */
911
912     if (!ObjDesc->Buffer.Length)
913     {
914         *EndTag = ObjDesc->Buffer.Pointer;
915         return_ACPI_STATUS (AE_OK);
916     }
917
918     /* Validate the template and get a pointer to the EndTag */
919
920     Status = AcpiUtWalkAmlResources (NULL, ObjDesc->Buffer.Pointer,
921                 ObjDesc->Buffer.Length, NULL, (void **) EndTag);
922
923     return_ACPI_STATUS (Status);
924 }