/* $FreeBSD: src/sys/dev/mii/e1000phy.c,v 1.1.2.2 2002/11/08 21:53:49 semenu Exp $ */ /* $DragonFly: src/sys/dev/netif/mii_layer/e1000phy.c,v 1.9 2006/12/22 23:26:20 swildner Exp $ */ /* $OpenBSD: eephy.c,v 1.26 2006/06/08 00:27:12 brad Exp $ */ /* * Principal Author: Parag Patel * Copyright (c) 2001 * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Additonal Copyright (c) 2001 by Traakan Software under same licence. * Secondary Author: Matthew Jacob */ /* * driver for the Marvell 88E1000 series external 1000/100/10-BT PHY. */ /* * Support added for the Marvell 88E1011 (Alaska) 1000/100/10baseTX and * 1000baseSX PHY. * Nathan Binkert * Jung-uk Kim */ #include #include #include #include #include #include #include #include "mii.h" #include "miivar.h" #include "miidevs.h" #include "e1000phyreg.h" #include "miibus_if.h" static int e1000phy_probe(device_t); static int e1000phy_attach(device_t); static int e1000phy_service(struct mii_softc *, struct mii_data *, int); static void e1000phy_status(struct mii_softc *); static int e1000phy_mii_phy_auto(struct mii_softc *, int); static void e1000phy_reset(struct mii_softc *); static device_method_t e1000phy_methods[] = { /* device interface */ DEVMETHOD(device_probe, e1000phy_probe), DEVMETHOD(device_attach, e1000phy_attach), DEVMETHOD(device_detach, ukphy_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), { 0, 0 } }; static const struct mii_phydesc e1000phys[] = { MII_PHYDESC(xxMARVELL, E1000_2), MII_PHYDESC(xxMARVELL, E1000_3), MII_PHYDESC(xxMARVELL, E1000_5), MII_PHYDESC(xxMARVELL, E1111), MII_PHYDESC(MARVELL, E1000), MII_PHYDESC(MARVELL, E1011), MII_PHYDESC(MARVELL, E1000_3), MII_PHYDESC(MARVELL, E1000_4), MII_PHYDESC(MARVELL, E1000_5), MII_PHYDESC(MARVELL, E1000_6), MII_PHYDESC(MARVELL, E1111), MII_PHYDESC(MARVELL, E1116), MII_PHYDESC_NULL }; static devclass_t e1000phy_devclass; static driver_t e1000phy_driver = { "e1000phy", e1000phy_methods, sizeof(struct mii_softc) }; DRIVER_MODULE(e1000phy, miibus, e1000phy_driver, e1000phy_devclass, 0, 0); static int e1000phy_probe(device_t dev) { struct mii_attach_args *ma = device_get_ivars(dev); const struct mii_phydesc *mpd; mpd = mii_phy_match(ma, e1000phys); if (mpd != NULL) { device_set_desc(dev, mpd->mpd_name); return 0; } return (ENXIO); } static int e1000phy_attach(device_t dev) { struct mii_softc *sc; struct mii_attach_args *ma; struct mii_data *mii; const char *sep = ""; sc = device_get_softc(dev); ma = device_get_ivars(dev); mii_softc_init(sc, ma); sc->mii_dev = device_get_parent(dev); mii = device_get_softc(sc->mii_dev); LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list); sc->mii_inst = mii->mii_instance; sc->mii_service = e1000phy_service; sc->mii_reset = e1000phy_reset; sc->mii_anegticks = MII_ANEGTICKS_GIGE; sc->mii_pdata = mii; sc->mii_flags |= MIIF_NOISOLATE; if (MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_MARVELL && MII_MODEL(ma->mii_id2) == MII_MODEL_MARVELL_E1011 && (PHY_READ(sc, E1000_ESSR) & E1000_ESSR_FIBER_LINK)) sc->mii_flags |= MIIF_HAVEFIBER; mii->mii_instance++; e1000phy_reset(sc); #define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL) #define PRINT(s) kprintf("%s%s", sep, s); sep = ", " #if 0 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst), E1000_CR_ISOLATE); #endif device_printf(dev, " "); if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, IFM_FDX, sc->mii_inst), E1000_CR_SPEED_1000 | E1000_CR_FULL_DUPLEX); PRINT("1000baseTX-FDX"); /* TODO - apparently 1000BT-simplex not supported? ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, 0, sc->mii_inst), E1000_CR_SPEED_1000); PRINT("1000baseTX"); */ ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, sc->mii_inst), E1000_CR_SPEED_100 | E1000_CR_FULL_DUPLEX); PRINT("100baseTX-FDX"); ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, sc->mii_inst), E1000_CR_SPEED_100); PRINT("100baseTX"); ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, sc->mii_inst), E1000_CR_SPEED_10 | E1000_CR_FULL_DUPLEX); PRINT("10baseTX-FDX"); ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, sc->mii_inst), E1000_CR_SPEED_10); PRINT("10baseTX"); } else { ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, IFM_FDX, sc->mii_inst), E1000_CR_SPEED_1000); PRINT("1000baseSX-FDX"); } ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), 0); PRINT("auto"); kprintf("\n"); #undef ADD #undef PRINT MIIBUS_MEDIAINIT(sc->mii_dev); return(0); } static void e1000phy_reset(struct mii_softc *sc) { uint32_t reg; int i; /* initialize custom E1000 registers to magic values */ reg = PHY_READ(sc, E1000_SCR); reg &= ~E1000_SCR_AUTO_X_MODE; PHY_WRITE(sc, E1000_SCR, reg); /* normal PHY reset */ /*mii_phy_reset(sc);*/ reg = PHY_READ(sc, E1000_CR); reg |= E1000_CR_RESET; PHY_WRITE(sc, E1000_CR, reg); for (i = 0; i < 500; i++) { DELAY(1); reg = PHY_READ(sc, E1000_CR); if (!(reg & E1000_CR_RESET)) break; } /* set more custom E1000 registers to magic values */ reg = PHY_READ(sc, E1000_SCR); reg |= E1000_SCR_ASSERT_CRS_ON_TX; PHY_WRITE(sc, E1000_SCR, reg); reg = PHY_READ(sc, E1000_ESCR); reg |= E1000_ESCR_TX_CLK_25; PHY_WRITE(sc, E1000_ESCR, reg); /* even more magic to reset DSP? */ PHY_WRITE(sc, 29, 0x1d); PHY_WRITE(sc, 30, 0xc1); PHY_WRITE(sc, 30, 0x00); } static int e1000phy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) { struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int reg; switch (cmd) { case MII_POLLSTAT: /* * If we're not polling our PHY instance, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return (0); break; case MII_MEDIACHG: /* * If the media indicates a different PHY instance, * isolate ourselves. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) { reg = PHY_READ(sc, E1000_CR); PHY_WRITE(sc, E1000_CR, reg | E1000_CR_ISOLATE); return (0); } /* * If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) { break; } switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_AUTO: /* * If we're already in auto mode, just return. */ if (sc->mii_flags & MIIF_DOINGAUTO) { return (0); } e1000phy_reset(sc); e1000phy_mii_phy_auto(sc, 1); break; case IFM_1000_SX: e1000phy_reset(sc); PHY_WRITE(sc, E1000_CR, E1000_CR_FULL_DUPLEX | E1000_CR_SPEED_1000); PHY_WRITE(sc, E1000_AR, E1000_FA_1000X_FD); break; case IFM_1000_T: if (sc->mii_flags & MIIF_DOINGAUTO) return (0); e1000phy_reset(sc); /* TODO - any other way to force 1000BT? */ e1000phy_mii_phy_auto(sc, 1); break; case IFM_100_TX: e1000phy_reset(sc); if ((ife->ifm_media & IFM_GMASK) == IFM_FDX) { PHY_WRITE(sc, E1000_CR, E1000_CR_FULL_DUPLEX | E1000_CR_SPEED_100); PHY_WRITE(sc, E1000_AR, E1000_AR_100TX_FD); } else { PHY_WRITE(sc, E1000_CR, E1000_CR_SPEED_100); PHY_WRITE(sc, E1000_AR, E1000_AR_100TX); } break; case IFM_10_T: e1000phy_reset(sc); if ((ife->ifm_media & IFM_GMASK) == IFM_FDX) { PHY_WRITE(sc, E1000_CR, E1000_CR_FULL_DUPLEX | E1000_CR_SPEED_10); PHY_WRITE(sc, E1000_AR, E1000_AR_10T_FD); } else { PHY_WRITE(sc, E1000_CR, E1000_CR_SPEED_10); PHY_WRITE(sc, E1000_AR, E1000_AR_10T); } break; default: return (EINVAL); } break; case MII_TICK: /* * If we're not currently selected, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) { return (0); } /* * Is the interface even up? */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) { return (0); } /* * Only used for autonegotiation. */ if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) { break; } /* * Check to see if we have link. If we do, we don't * need to restart the autonegotiation process. Read * the BMSR twice in case it's latched. */ reg = PHY_READ(sc, E1000_SR) | PHY_READ(sc, E1000_SR); if (reg & E1000_SR_LINK_STATUS) break; /* * Only retry autonegotiation every mii_anegticks seconds. */ if (++(sc->mii_ticks) != sc->mii_anegticks) { return (0); } sc->mii_ticks = 0; e1000phy_reset(sc); if (e1000phy_mii_phy_auto(sc, 0) == EJUSTRETURN) { return (0); } break; } /* Update the media status. */ e1000phy_status(sc); /* Callback if something changed. */ mii_phy_update(sc, cmd); return (0); } static void e1000phy_status(struct mii_softc *sc) { struct mii_data *mii = sc->mii_pdata; int bmsr, bmcr, esr, ssr, isr, ar, lpar; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; bmsr = PHY_READ(sc, E1000_SR) | PHY_READ(sc, E1000_SR); esr = PHY_READ(sc, E1000_ESR); bmcr = PHY_READ(sc, E1000_CR); ssr = PHY_READ(sc, E1000_SSR); isr = PHY_READ(sc, E1000_ISR); ar = PHY_READ(sc, E1000_AR); lpar = PHY_READ(sc, E1000_LPAR); if (bmsr & E1000_SR_LINK_STATUS) mii->mii_media_status |= IFM_ACTIVE; if (bmcr & E1000_CR_LOOPBACK) mii->mii_media_active |= IFM_LOOP; if ((sc->mii_flags & MIIF_DOINGAUTO) && (!(bmsr & E1000_SR_AUTO_NEG_COMPLETE) || !(ssr & E1000_SSR_LINK) || !(ssr & E1000_SSR_SPD_DPLX_RESOLVED))) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { if (ssr & E1000_SSR_1000MBS) mii->mii_media_active |= IFM_1000_T; else if (ssr & E1000_SSR_100MBS) mii->mii_media_active |= IFM_100_TX; else mii->mii_media_active |= IFM_10_T; } else { if (ssr & E1000_SSR_1000MBS) mii->mii_media_active |= IFM_1000_SX; } if (ssr & E1000_SSR_DUPLEX) mii->mii_media_active |= IFM_FDX; else mii->mii_media_active |= IFM_HDX; if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { /* FLAG0==rx-flow-control FLAG1==tx-flow-control */ if ((ar & E1000_AR_PAUSE) && (lpar & E1000_LPAR_PAUSE)) { mii->mii_media_active |= IFM_FLAG0 | IFM_FLAG1; } else if (!(ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) && (lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) { mii->mii_media_active |= IFM_FLAG1; } else if ((ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) && !(lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) { mii->mii_media_active |= IFM_FLAG0; } } } static int e1000phy_mii_phy_auto(struct mii_softc *sc, int waitfor) { int bmsr, i; if ((sc->mii_flags & MIIF_DOINGAUTO) == 0) { if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { PHY_WRITE(sc, E1000_AR, E1000_AR_10T | E1000_AR_10T_FD | E1000_AR_100TX | E1000_AR_100TX_FD | E1000_AR_PAUSE | E1000_AR_ASM_DIR); PHY_WRITE(sc, E1000_1GCR, E1000_1GCR_1000T_FD); } else { PHY_WRITE(sc, E1000_AR, E1000_FA_1000X_FD | E1000_FA_SYM_PAUSE | E1000_FA_ASYM_PAUSE); } PHY_WRITE(sc, E1000_CR, E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG); } if (waitfor) { /* Wait 5 seconds for it to complete. */ for (i = 0; i < 5000; i++) { bmsr = PHY_READ(sc, E1000_SR) | PHY_READ(sc, E1000_SR); if (bmsr & E1000_SR_AUTO_NEG_COMPLETE) { return (0); } DELAY(1000); } /* * Don't need to worry about clearing MIIF_DOINGAUTO. * If that's set, a timeout is pending, and it will * clear the flag. [do it anyway] */ return (EIO); } /* * Just let it finish asynchronously. This is for the benefit of * the tick handler driving autonegotiation. Don't want 500ms * delays all the time while the system is running! */ if (sc->mii_flags & MIIF_AUTOTSLEEP) { sc->mii_flags |= MIIF_DOINGAUTO; tsleep(&sc->mii_flags, 0, "miiaut", hz >> 1); mii_phy_auto_timeout(sc); } else if ((sc->mii_flags & MIIF_DOINGAUTO) == 0) { sc->mii_flags |= MIIF_DOINGAUTO; callout_reset(&sc->mii_auto_ch, 5 * hz, mii_phy_auto_timeout, sc); } return (EJUSTRETURN); }