# @(#)Makefile 8.2 (Berkeley) 1/4/94 # $FreeBSD: src/include/Makefile,v 1.109.2.27 2003/01/24 05:12:29 sam Exp $ # $DragonFly: src/include/Makefile,v 1.25 2005/07/07 11:49:55 corecode Exp $ # # Doing a make install builds /usr/include # # The ``rm -rf''s used below are safe because rm doesn't follow symbolic # links. CLEANFILES= osreldate.h version vers.c SUBDIR= arpa protocols rpc rpcsvc INCS= a.out.h ar.h assert.h bitstring.h complex.h cpio.h ctype.h db.h \ dirent.h disktab.h \ dlfcn.h elf.h elf-hints.h err.h fnmatch.h fstab.h \ fts.h getopt.h glob.h grp.h histedit.h iconv.h ieeefp.h ifaddrs.h \ iso646.h inttypes.h \ langinfo.h libgen.h limits.h link.h locale.h malloc.h memory.h \ mpool.h ndbm.h netdb.h nl_types.h nlist.h objformat.h \ paths.h pthread.h pthread_np.h pwd.h \ ranlib.h readpassphrase.h regex.h regexp.h resolv.h re_comp.h rmd160.h \ search.h setjmp.h sgtty.h \ signal.h stab.h stdarg.h stdbool.h stddef.h stdint.h stdio.h stdlib.h \ string.h stringlist.h strings.h struct.h sysexits.h tar.h time.h \ timers.h ttyent.h unistd.h ulimit.h utime.h utmp.h vis.h wchar.h \ wctype.h MHDRS= float.h floatingpoint.h varargs.h # posix4/aio.h conflicts with dysons and isn't installed: PHDRS= mqueue.h sched.h semaphore.h # aio.h # Only for default SHARED=copies case SHDRS= soundcard.h joystick.h LHDRS= aio.h errno.h fcntl.h linker_set.h poll.h syslog.h \ termios.h ucontext.h # directories which also contain header files that need to be copied. # Other directories, like 'bus' and 'netproto', are created using mtree. # # XXX allow these directories to not contain header files. LDIRS= net netgraph netinet netinet6 sys vm # Subdirectories containing header files to copy. In symlink mode # the subdirectory will be symlinked. Care must be taken to adjust # LSYMSUBDIRS below to remove subdirectories whos parent directories. # If you make a mistake, part of your source tree might get overwritten # when buildworld is run. # LSUBDIRS= bus/cam bus/cam/scsi \ emulation/posix4 \ emulation/linux \ vfs/msdosfs vfs/nfs vfs/ntfs vfs/nwfs \ vfs/smbfs vfs/udf vfs/ufs \ net/vlan net/ipfw net/ip6fw net/dummynet net/sppp net/ip_mroute \ net/bridge net/tun net/ppp net/ppp_layer net/sl net/pf net/altq \ netgraph/UI netgraph/async netgraph/bpf netgraph/bridge \ netgraph/cisco netgraph/echo netgraph/eiface netgraph/etf \ netgraph/ether netgraph/fec netgraph/frame_relay netgraph/hole \ netgraph/iface netgraph/ksocket netgraph/l2tp netgraph/lmi \ netgraph/mppc netgraph/one2many netgraph/ppp \ netgraph/pppoe netgraph/pptpgre netgraph/rfc1490 netgraph/socket \ netgraph/tee netgraph/tty netgraph/vjc \ bus/cam bus/usb bus/pccard bus/pci bus/isa \ netproto/atalk netproto/atm netproto/ipsec netproto/ipx \ netproto/key netproto/natm netproto/ncp netproto/ns netproto/smb \ netproto/atm/ipatm netproto/atm/sigpvc netproto/atm/spans \ netproto/atm/uni netproto/802_11 LSUBDIRS3= vfs/isofs/cd9660 net/i4b/include \ dev/misc/lpt dev/netif/wi dev/video/bktr dev/video/meteor # For SHARED=symlinks, bus/cam and netproto/atm are symlinks, so cam/scsi # and netproto/atm/* are taken care of LSYMSUBDIRS= ${LSUBDIRS:Nbus/cam/scsi:Nnetproto/atm/*:Nnet/*:Nnetgraph/*} LSYMSUBDIRS3= ${LSUBDIRS3:Nnet/*} # For obsolete headers which need to be removed RMHEADERS= machine/ansi.h sys/inttypes.h # Define SHARED to indicate whether you want symbolic links to the system # source (``symlinks''), or a separate copy (``copies''). ``symlinks'' is # probably only useful for developers and should be avoided if you do not # wish to tie your /usr/include and /usr/src together. #SHARED= symlinks SHARED?= copies INCS+= osreldate.h osreldate.h: ${.CURDIR}/../sys/conf/newvers.sh \ ${.CURDIR}/../sys/sys/param.h @${ECHO} creating osreldate.h from newvers.sh setvar PARAMFILE ${.CURDIR}/../sys/sys/param.h; \ . ${.CURDIR}/../sys/conf/newvers.sh; \ echo "$$COPYRIGHT" > osreldate.h; \ echo "#ifdef _KERNEL" >> osreldate.h; \ echo '#error "osreldate.h must not be used in the kernel, use sys/param.h"' >> osreldate.h; \ echo "#else" >> osreldate.h; \ echo "#undef __DragonFly_version" >> osreldate.h; \ echo "#define __DragonFly_version $$RELDATE" >> osreldate.h; \ echo "#ifdef __FreeBSD__" >> osreldate.h; \ echo "#undef __FreeBSD_version" >> osreldate.h; \ echo "#define __FreeBSD_version 480101" >> osreldate.h; \ echo "#endif" >> osreldate.h; \ echo "#endif" >> osreldate.h .for i in ${LHDRS} INCSLINKS+= sys/$i ${INCLUDEDIR}/$i .endfor .for i in ${MHDRS} INCSLINKS+= machine/$i ${INCLUDEDIR}/$i .endfor .for i in ${PHDRS} INCSLINKS+= emulation/posix4/$i ${INCLUDEDIR}/$i .endfor INCSLINKS+= bus/cam ${INCLUDEDIR}/cam INCSLINKS+= vfs/msdosfs ${INCLUDEDIR}/msdosfs INCSLINKS+= vfs/isofs ${INCLUDEDIR}/isofs INCSLINKS+= vfs/mfs ${INCLUDEDIR}/mfs INCSLINKS+= vfs/nfs ${INCLUDEDIR}/nfs INCSLINKS+= vfs/ntfs ${INCLUDEDIR}/ntfs INCSLINKS+= vfs/nwfs ${INCLUDEDIR}/nwfs INCSLINKS+= vfs ${INCLUDEDIR}/fs # this is for and paths used by ports # It is hopefully a temporary hack until we have environments working. INCSLINKS+= vfs ${INCLUDEDIR}/ufs INCSLINKS+= ufs ${INCLUDEDIR}/vfs/ffs INCSLINKS+= emulation ${INCLUDEDIR}/compat INCSLINKS+= netproto/atalk ${INCLUDEDIR}/netatalk INCSLINKS+= netproto/atm ${INCLUDEDIR}/netatm INCSLINKS+= netproto/ipsec ${INCLUDEDIR}/netipsec INCSLINKS+= netproto/ipx ${INCLUDEDIR}/netipx INCSLINKS+= netproto/key ${INCLUDEDIR}/netkey INCSLINKS+= netproto/natm ${INCLUDEDIR}/netnatm INCSLINKS+= netproto/ncp ${INCLUDEDIR}/netncp INCSLINKS+= netproto/ns ${INCLUDEDIR}/netns INCSLINKS+= netproto/smb ${INCLUDEDIR}/netsmb INCSLINKS+= bus/pccard ${INCLUDEDIR}/pccard # warning, we cannot softlink through ${INCLUDEDIR}/machine/... because # machine itself is a softlink into the source tree in buildworld's # temporary include hierarchy. mtree_setup: .for i in ${LDIRS} ${LSYMSUBDIRS} ${LSYMSUBDIRS3} machine crypto if [ -h ${DESTDIR}/usr/include/$i ]; then \ rm -f ${DESTDIR}/usr/include/$i; \ fi .endfor mtree -deU -f ${.CURDIR}/../etc/mtree/BSD.include.dist \ -p ${DESTDIR}/usr/include copies: mtree_setup .for i in ${LDIRS} ${LSUBDIRS} ${LSUBDIRS3} cd ${.CURDIR}/../sys; \ ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 $i/*.h \ ${DESTDIR}/usr/include/$i .endfor cd ${.CURDIR}/../sys; \ ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 opencrypto/*.h \ ${DESTDIR}/usr/include/crypto .if exists(${.CURDIR}/../sys/${MACHINE_ARCH}/include) cd ${.CURDIR}/../sys/${MACHINE_ARCH}/include; \ ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ ${DESTDIR}/usr/include/machine .if exists(${.CURDIR}/../sys/${MACHINE_ARCH}/include/pc) cd ${.CURDIR}/../sys/${MACHINE_ARCH}/include/pc; \ ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ ${DESTDIR}/usr/include/machine/pc .endif .endif .if exists(${.CURDIR}/../sys/net/i4b/include/${MACHINE_ARCH}) cd ${.CURDIR}/../sys/net/i4b/include/${MACHINE_ARCH}; \ ${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \ ${DESTDIR}/usr/include/i4b_machine .endif .for i in ${SHDRS} ${LN} -sf ../sys/$i ${DESTDIR}/usr/include/machine/$i .endfor .for i in ${RMHEADERS} rm -f ${DESTDIR}/usr/include/$i .endfor symlinks: mtree_setup @${ECHO} "Setting up symlinks to kernel source tree..." .for i in ${LDIRS} rm -rf ${DESTDIR}/usr/include/$i ${LN} -s ../../sys/$i ${DESTDIR}/usr/include/$i .endfor rm -rf ${DESTDIR}/usr/include/crypto ${LN} -s ../../sys/opencrypto ${DESTDIR}/usr/include/crypto .for i in ${LSYMSUBDIRS} rm -rf ${DESTDIR}/usr/include/$i ${LN} -s ../../../sys/$i ${DESTDIR}/usr/include/$i .endfor .for i in ${LSYMSUBDIRS3} rm -rf ${DESTDIR}/usr/include/$i ${LN} -s ../../../../sys/$i ${DESTDIR}/usr/include/$i .endfor rm -rf ${DESTDIR}/usr/include/machine ${LN} -s ../../sys/${MACHINE_ARCH}/include ${DESTDIR}/usr/include/machine rm -rf ${DESTDIR}/usr/include/i4b_machine ${LN} -s ../../sys/net/i4b/include/${MACHINE_ARCH} ${DESTDIR}/usr/include/i4b_machine .include installincludes: ${SHARED}