/* * ntp.h - NTP definitions for the masses */ #ifndef NTP_H #define NTP_H #include "ntp_types.h" #include /* * Calendar arithmetic - contributed by G. Healton */ #define YEAR_BREAK 500 /* years < this are tm_year values: * Break < AnyFourDigitYear && Break > * Anytm_yearYear */ #define YEAR_PIVOT 98 /* 97/98: years < this are year 2000+ * FYI: official UNIX pivot year is * 68/69 */ /* * Number of Days since 1 BC Gregorian to 1 January of given year */ #define julian0(year) (((year) * 365 ) + ((year) > 0 ? (((year) + 3) \ / 4 - ((year - 1) / 100) + ((year - 1) / \ 400)) : 0)) /* * Number of days since start of NTP time to 1 January of given year */ #define ntp0(year) (julian0(year) - julian0(1900)) /* * Number of days since start of UNIX time to 1 January of given year */ #define unix0(year) (julian0(year) - julian0(1970)) /* * LEAP YEAR test for full 4-digit years (e.g, 1999, 2010) */ #define isleap_4(y) ((y) % 4 == 0 && !((y) % 100 == 0 && !(y % \ 400 == 0))) /* * LEAP YEAR test for tm_year (struct tm) years (e.g, 99, 110) */ #define isleap_tm(y) ((y) % 4 == 0 && !((y) % 100 == 0 && !(((y) \ + 1900) % 400 == 0))) /* * to convert simple two-digit years to tm_year style years: * * if (year < YEAR_PIVOT) * year += 100; * * to convert either two-digit OR tm_year years to four-digit years: * * if (year < YEAR_PIVOT) * year += 100; * * if (year < YEAR_BREAK) * year += 1900; */ /* * How to get signed characters. On machines where signed char works, * use it. On machines where signed char doesn't work, char had better * be signed. */ #ifdef NEED_S_CHAR_TYPEDEF # if SIZEOF_SIGNED_CHAR typedef signed char s_char; # else typedef char s_char; # endif /* XXX: Why is this sequent bit INSIDE this test? */ # ifdef sequent # undef SO_RCVBUF # undef SO_SNDBUF # endif #endif #ifndef TRUE # define TRUE 1 #endif /* TRUE */ #ifndef FALSE # define FALSE 0 #endif /* FALSE */ /* * NTP protocol parameters. See section 3.2.6 of the specification. */ #define NTP_VERSION ((u_char)4) /* current version number */ #define NTP_OLDVERSION ((u_char)1) /* oldest credible version */ #define NTP_PORT 123 /* included for sake of non-unix machines */ #define NTP_UNREACH 16 /* poll interval backoff count */ #define NTP_MINDPOLL 6 /* log2 default min poll interval (64 s) */ #define NTP_MAXDPOLL 10 /* log2 default max poll interval (~17 m) */ #define NTP_MINPOLL 4 /* log2 min poll interval (16 s) */ #define NTP_MAXPOLL 17 /* log2 max poll interval (~4.5 h) */ #define NTP_MINCLOCK 3 /* minimum survivors */ #define NTP_MAXCLOCK 10 /* maximum candidates */ #define NTP_SHIFT 8 /* 8 suitable for crystal time base */ #define NTP_MAXKEY 65535 /* maximum authentication key number */ #define NTP_MAXSESSION 100 /* maximum session key list entries */ #define NTP_AUTOMAX 13 /* log2 default max session key lifetime */ #define KEY_REVOKE 16 /* log2 default key revoke timeout */ #define NTP_FWEIGHT .5 /* clock filter weight */ #define CLOCK_SGATE 4. /* popcorn spike gate */ #define BURST_INTERVAL1 4 /* first interburst interval (log2) */ #define BURST_INTERVAL2 1 /* succeeding interburst intervals (log2) */ #define HUFFPUFF 900 /* huff-n'-puff sample interval (s) */ /* * Operations for jitter calculations (these use doubles). * * Note that we carefully separate the jitter component from the * dispersion component (frequency error plus precision). The frequency * error component is computed as CLOCK_PHI times the difference between * the epoch of the time measurement and the reference time. The * precision componen is computed as the square root of the mean of the * squares of a zero-mean, uniform distribution of unit maximum * amplitude. Whether this makes statistical sense may be arguable. */ #define SQUARE(x) ((x) * (x)) #define SQRT(x) (sqrt(x)) #define DIFF(x, y) (SQUARE((x) - (y))) #define LOGTOD(a) ((a) < 0 ? 1. / (1L << -(a)) : \ 1L << (int)(a)) /* log2 to double */ #define UNIVAR(x) (SQUARE(.28867513 * LOGTOD(x))) /* std uniform distr */ #define ULOGTOD(a) (1L << (int)(a)) /* ulog2 to double */ #define MAXDISPERSE 16. /* max dispersion (square) */ #define MINDISPERSE .01 /* min dispersion */ #define MAXDISTANCE 1. /* max root distance */ #define EVENT_TIMEOUT 0 /* one second, that is */ #ifdef AUTOKEY /* * The following structures are used in the autokey protocol. * * The autokey structure holds the values used to authenticate key IDs. */ struct autokey { /* network byte order */ tstamp_t tstamp; /* timestamp */ keyid_t key; /* key ID */ int32 seq; /* key number */ u_int32 siglen; /* signature length */ u_int32 pkt[1]; /* start of signature field */ u_char *sig; /* signature */ }; /* * The cookie structure holds the current private value used to * construct session keys. */ struct cookie { /* network byte order */ tstamp_t tstamp; /* timestamp */ keyid_t key; /* key ID */ u_int32 siglen; /* signature length */ u_int32 pkt[1]; /* start of signature field */ u_char *sig; /* signature */ }; /* * The value structure holds variable length data such as public * key, agreement parameters, public valule and leapsecond table. */ struct value { /* network byte order */ tstamp_t tstamp; /* timestamp */ tstamp_t fstamp; /* filestamp */ u_int32 vallen; /* value length */ u_int32 pkt[1]; /* start of value field */ u_char *ptr; /* data pointer */ u_int32 siglen; /* signature length */ u_char *sig; /* signature */ }; #endif /* AUTOKEY */ /* * The interface structure is used to hold the addresses and socket * numbers of each of the interfaces we are using. */ struct interface { int fd; /* socket this is opened on */ int bfd; /* socket for receiving broadcasts */ struct sockaddr_in sin; /* interface address */ struct sockaddr_in bcast; /* broadcast address */ struct sockaddr_in mask; /* interface mask */ char name[8]; /* name of interface */ int flags; /* interface flags */ int last_ttl; /* last TTL specified */ volatile long received; /* number of incoming packets */ long sent; /* number of outgoing packets */ long notsent; /* number of send failures */ }; /* * Flags for interfaces */ #define INT_BROADCAST 1 /* can broadcast out this interface */ #define INT_BCASTOPEN 2 /* broadcast socket is open */ #define INT_LOOPBACK 4 /* the loopback interface */ #define INT_MULTICAST 8 /* multicasting enabled */ /* * Define flasher bits (tests 1 through 11 in packet procedure) * These reveal the state at the last grumble from the peer and are * most handy for diagnosing problems, even if not strictly a state * variable in the spec. These are recorded in the peer structure. */ #define TEST1 0x0001 /* duplicate packet received */ #define TEST2 0x0002 /* bogus packet received */ #define TEST3 0x0004 /* protocol unsynchronized */ #define TEST4 0x0008 /* access denied */ #define TEST5 0x0010 /* authentication failed */ #define TEST6 0x0020 /* peer clock unsynchronized */ #define TEST7 0x0040 /* peer stratum out of bounds */ #define TEST8 0x0080 /* root delay/dispersion bounds check */ #define TEST9 0x0100 /* peer delay/dispersion bounds check */ #define TEST10 0x0200 /* autokey failed */ #define TEST11 0x0400 /* proventic not confirmed */ /* * The peer structure. Holds state information relating to the guys * we are peering with. Most of this stuff is from section 3.2 of the * spec. */ struct peer { struct peer *next; /* pointer to next association */ struct peer *ass_next; /* link pointer in associd hash */ struct sockaddr_in srcadr; /* address of remote host */ struct interface *dstadr; /* pointer to address on local host */ associd_t associd; /* association ID */ u_char version; /* version number */ u_char hmode; /* local association mode */ u_char hpoll; /* local poll interval */ u_char kpoll; /* last poll interval */ u_char minpoll; /* min poll interval */ u_char maxpoll; /* max poll interval */ u_char burst; /* packets remaining in burst */ u_int flags; /* association flags */ u_char cast_flags; /* additional flags */ u_int flash; /* protocol error test tally bits */ u_char last_event; /* last peer error code */ u_char num_events; /* number of error events */ u_char ttlmax; /* max ttl/refclock mode */ /* * Variables used by reference clock support */ struct refclockproc *procptr; /* refclock structure pointer */ u_char refclktype; /* reference clock type */ u_char refclkunit; /* reference clock unit number */ u_char sstclktype; /* clock type for system status word */ /* * Variables set by received packet */ u_char leap; /* local leap indicator */ u_char pmode; /* remote association mode */ u_char stratum; /* remote stratum */ s_char precision; /* remote clock precision */ u_char ppoll; /* remote poll interval */ u_int32 refid; /* remote reference ID */ l_fp reftime; /* update epoch */ /* * Variables used by authenticated client */ keyid_t keyid; /* current key ID */ #ifdef AUTOKEY #define clear_to_zero assoc associd_t assoc; /* peer association ID */ u_int32 crypto; /* peer status word */ #ifdef PUBKEY struct value pubkey; /* public key */ struct value certif; /* certificate */ u_char *keystr; /* host name */ #endif /* PUBKEY */ keyid_t pkeyid; /* previous key ID */ keyid_t hcookie; /* host cookie */ struct cookie pcookie; /* peer cookie */ struct autokey recauto; /* autokey */ u_int32 cmmd; /* peer command */ /* * Variables used by authenticated server */ keyid_t *keylist; /* session key ID list */ int keynumber; /* current key number */ struct autokey sndauto; /* autokey */ #else /* AUTOKEY */ #define clear_to_zero status #endif /* AUTOKEY */ /* * Ephemeral state variables */ u_char status; /* peer status */ u_char pollsw; /* what it says */ u_char ttl; /* ttl for manycast mode */ u_char reach; /* reachability register */ u_char unreach; /* unreachable count */ u_long epoch; /* reference epoch */ u_short filter_nextpt; /* index into filter shift register */ double filter_delay[NTP_SHIFT]; /* delay shift register */ double filter_offset[NTP_SHIFT]; /* offset shift register */ double filter_disp[NTP_SHIFT]; /* dispersion shift register */ u_long filter_epoch[NTP_SHIFT]; /* epoch shift register */ u_char filter_order[NTP_SHIFT]; /* filter sort index */ l_fp org; /* originate time stamp */ l_fp rec; /* receive time stamp */ l_fp xmt; /* transmit time stamp */ double offset; /* peer clock offset */ double delay; /* peer roundtrip delay */ double jitter; /* peer jitter (squares) */ double disp; /* peer dispersion */ double estbdelay; /* clock offset to broadcast server */ /* * Variables set by received packet */ double rootdelay; /* roundtrip delay to primary clock */ double rootdispersion; /* dispersion to primary clock */ /* * End of clear-to-zero area */ u_long update; /* receive epoch */ #define end_clear_to_zero update u_long outdate; /* send time last packet */ u_long nextdate; /* send time next packet */ u_long nextaction; /* peer local activity timeout (refclocks mainly) */ void (*action) P((struct peer *)); /* action timeout function */ /* * Statistic counters */ u_long timereset; /* time stat counters were reset */ u_long timereceived; /* last packet received time */ u_long timereachable; /* last reachable/unreachable time */ u_long sent; /* packets sent */ u_long received; /* packets received */ u_long processed; /* packets processed by the protocol */ u_long badauth; /* packets cryptosum failed */ u_long bogusorg; /* packets bogus origin */ u_long oldpkt; /* packets duplicate packet */ u_long seldisptoolarge; /* packets dispersion to large*/ u_long selbroken; /* not used */ }; /* * Values for peer.leap, sys_leap */ #define LEAP_NOWARNING 0x0 /* normal, no leap second warning */ #define LEAP_ADDSECOND 0x1 /* last minute of day has 61 seconds */ #define LEAP_DELSECOND 0x2 /* last minute of day has 59 seconds */ #define LEAP_NOTINSYNC 0x3 /* overload, clock is free running */ /* * Values for peer.mode */ #define MODE_UNSPEC 0 /* unspecified (probably old NTP version) */ #define MODE_ACTIVE 1 /* symmetric active */ #define MODE_PASSIVE 2 /* symmetric passive */ #define MODE_CLIENT 3 /* client mode */ #define MODE_SERVER 4 /* server mode */ #define MODE_BROADCAST 5 /* broadcast mode */ #define MODE_CONTROL 6 /* control mode packet */ #define MODE_PRIVATE 7 /* implementation defined function */ #define MODE_BCLIENT 8 /* broadcast client mode */ /* * Values for peer.stratum, sys_stratum */ #define STRATUM_REFCLOCK ((u_char)0) /* stratum claimed by primary clock */ /* A stratum of 0 in the packet is mapped to 16 internally */ #define STRATUM_PKT_UNSPEC ((u_char)0) /* unspecified in packet */ #define STRATUM_UNSPEC ((u_char)16) /* unspecified */ /* * Values for peer.flags */ #define FLAG_CONFIG 0x0001 /* association was configured */ #define FLAG_AUTHENABLE 0x0002 /* authentication required */ #define FLAG_AUTHENTIC 0x0004 /* last message was authentic */ #define FLAG_SKEY 0x0008 /* autokey authentication */ #define FLAG_MCAST 0x0010 /* multicast client mode */ #define FLAG_REFCLOCK 0x0020 /* this is actually a reference clock */ #define FLAG_SYSPEER 0x0040 /* this is one of the selected peers */ #define FLAG_PREFER 0x0080 /* this is the preferred peer */ #define FLAG_BURST 0x0100 /* burst mode */ #define FLAG_IBURST 0x0200 /* initial burst mode */ #define FLAG_NOSELECT 0x0400 /* this is a "noselect" peer */ #define FLAG_AUTOKEY 0x0800 /* autokey confirmed */ #define FLAG_ASSOC 0x1000 /* autokey reqeust */ #define FLAG_PROVEN 0x2000 /* proventic confirmed */ /* * Definitions for the clear() routine. We use memset() to clear * the parts of the peer structure which go to zero. These are * used to calculate the start address and length of the area. */ #define CLEAR_TO_ZERO(p) ((char *)&((p)->clear_to_zero)) #define END_CLEAR_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero)) #define LEN_CLEAR_TO_ZERO (END_CLEAR_TO_ZERO((struct peer *)0) \ - CLEAR_TO_ZERO((struct peer *)0)) #define CRYPTO_TO_ZERO(p) ((char *)&((p)->clear_to_zero)) #define END_CRYPTO_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero)) #define LEN_CRYPTO_TO_ZERO (END_CRYPTO_TO_ZERO((struct peer *)0) \ - CRYPTO_TO_ZERO((struct peer *)0)) /* * Reference clock identifiers (for pps signal) */ #define PPSREFID (u_int32)"PPS " /* used when pps controls stratum>1 */ /* * Reference clock types. Added as necessary. */ #define REFCLK_NONE 0 /* unknown or missing */ #define REFCLK_LOCALCLOCK 1 /* external (e.g., lockclock) */ #define REFCLK_GPS_TRAK 2 /* TRAK 8810 GPS Receiver */ #define REFCLK_WWV_PST 3 /* PST/Traconex 1020 WWV/H */ #define REFCLK_SPECTRACOM 4 /* Spectracom (generic) Receivers */ #define REFCLK_TRUETIME 5 /* TrueTime (generic) Receivers */ #define REFCLK_IRIG_AUDIO 6 /* IRIG-B/W audio decoder */ #define REFCLK_CHU_AUDIO 7 /* CHU audio demodulator/decoder */ #define REFCLK_PARSE 8 /* generic driver (usually DCF77,GPS,MSF) */ #define REFCLK_GPS_MX4200 9 /* Magnavox MX4200 GPS */ #define REFCLK_GPS_AS2201 10 /* Austron 2201A GPS */ #define REFCLK_GPS_ARBITER 11 /* Arbiter 1088A/B/ GPS */ #define REFCLK_IRIG_TPRO 12 /* KSI/Odetics TPRO-S IRIG */ #define REFCLK_ATOM_LEITCH 13 /* Leitch CSD 5300 Master Clock */ #define REFCLK_MSF_EES 14 /* EES M201 MSF Receiver */ #define REFCLK_GPSTM_TRUE 15 /* OLD TrueTime GPS/TM-TMD Receiver */ #define REFCLK_IRIG_BANCOMM 16 /* Bancomm GPS/IRIG Interface */ #define REFCLK_GPS_DATUM 17 /* Datum Programmable Time System */ #define REFCLK_NIST_ACTS 18 /* NIST Auto Computer Time Service */ #define REFCLK_WWV_HEATH 19 /* Heath GC1000 WWV/WWVH Receiver */ #define REFCLK_GPS_NMEA 20 /* NMEA based GPS clock */ #define REFCLK_GPS_VME 21 /* TrueTime GPS-VME Interface */ #define REFCLK_ATOM_PPS 22 /* 1-PPS Clock Discipline */ #define REFCLK_PTB_ACTS 23 /* PTB Auto Computer Time Service */ #define REFCLK_USNO 24 /* Naval Observatory dialup */ #define REFCLK_GPS_HP 26 /* HP 58503A Time/Frequency Receiver */ #define REFCLK_ARCRON_MSF 27 /* ARCRON MSF radio clock. */ #define REFCLK_SHM 28 /* clock attached thru shared memory */ #define REFCLK_PALISADE 29 /* Trimble Navigation Palisade GPS */ #define REFCLK_ONCORE 30 /* Motorola UT Oncore GPS */ #define REFCLK_GPS_JUPITER 31 /* Rockwell Jupiter GPS receiver */ #define REFCLK_CHRONOLOG 32 /* Chrono-log K WWVB receiver */ #define REFCLK_DUMBCLOCK 33 /* Dumb localtime clock */ #define REFCLK_ULINK 34 /* Ultralink M320 WWVB receiver */ #define REFCLK_PCF 35 /* Conrad parallel port radio clock */ #define REFCLK_WWV_AUDIO 36 /* WWV/H audio demodulator/decoder */ #define REFCLK_FG 37 /* Forum Graphic GPS */ #define REFCLK_HOPF_SERIAL 38 /* hopf DCF77/GPS serial line receiver */ #define REFCLK_HOPF_PCI 39 /* hopf DCF77/GPS PCI receiver */ #define REFCLK_MAX 39 /* Grow as needed... */ /* * We tell reference clocks from real peers by giving the reference * clocks an address of the form 127.127.t.u, where t is the type and * u is the unit number. We define some of this here since we will need * some sanity checks to make sure this address isn't interpretted as * that of a normal peer. */ #define REFCLOCK_ADDR 0x7f7f0000 /* 127.127.0.0 */ #define REFCLOCK_MASK 0xffff0000 /* 255.255.0.0 */ #define ISREFCLOCKADR(srcadr) ((SRCADR(srcadr) & REFCLOCK_MASK) \ == REFCLOCK_ADDR) /* * Macro for checking for invalid addresses. This is really, really * gross, but is needed so no one configures a host on net 127 now that * we're encouraging it the the configuration file. */ #define LOOPBACKADR 0x7f000001 #define LOOPNETMASK 0xff000000 #define ISBADADR(srcadr) (((SRCADR(srcadr) & LOOPNETMASK) \ == (LOOPBACKADR & LOOPNETMASK)) \ && (SRCADR(srcadr) != LOOPBACKADR)) /* * Utilities for manipulating addresses and port numbers */ #define NSRCADR(src) ((src)->sin_addr.s_addr) /* address in net byte order */ #define NSRCPORT(src) ((src)->sin_port) /* port in net byte order */ #define SRCADR(src) (ntohl(NSRCADR((src)))) /* address in host byte order */ #define SRCPORT(src) (ntohs(NSRCPORT((src)))) /* host port */ /* * NTP packet format. The mac field is optional. It isn't really * an l_fp either, but for now declaring it that way is convenient. * See Appendix A in the specification. * * Note that all u_fp and l_fp values arrive in network byte order * and must be converted (except the mac, which isn't, really). */ struct pkt { u_char li_vn_mode; /* leap indicator, version and mode */ u_char stratum; /* peer stratum */ u_char ppoll; /* peer poll interval */ s_char precision; /* peer clock precision */ u_fp rootdelay; /* distance to primary clock */ u_fp rootdispersion; /* clock dispersion */ u_int32 refid; /* reference clock ID */ l_fp reftime; /* time peer clock was last updated */ l_fp org; /* originate time stamp */ l_fp rec; /* receive time stamp */ l_fp xmt; /* transmit time stamp */ #define LEN_PKT_NOMAC 12 * sizeof(u_int32) /* min header length */ #define LEN_PKT_MAC LEN_PKT_NOMAC + sizeof(u_int32) #define MIN_MAC_LEN 3 * sizeof(u_int32) /* DES */ #define MAX_MAC_LEN 5 * sizeof(u_int32) /* MD5 */ /* * The length of the packet less MAC must be a multiple of 64 * with an RSA modulus and Diffie-Hellman prime of 64 octets * and maximum host name of 128 octets, the maximum autokey * command is 152 octets and maximum autokey response is 460 * octets. A packet can contain no more than one command and one * response, so the maximum total extension field length is 672 * octets. But, to handle humungus certificates, the bank must * be broke. */ #ifdef AUTOKEY #ifdef PUBKEY u_int32 exten[5000 / 4]; /* max extension field */ #else u_int32 exten[672 / 4]; /* max extension field */ #endif /* PUBKEY */ #else /* AUTOKEY */ u_int32 exten[1]; /* misused */ #endif /* AUTOKEY */ u_char mac[MAX_MAC_LEN]; /* mac */ }; /* * Stuff for extracting things from li_vn_mode */ #define PKT_MODE(li_vn_mode) ((u_char)((li_vn_mode) & 0x7)) #define PKT_VERSION(li_vn_mode) ((u_char)(((li_vn_mode) >> 3) & 0x7)) #define PKT_LEAP(li_vn_mode) ((u_char)(((li_vn_mode) >> 6) & 0x3)) /* * Stuff for putting things back into li_vn_mode */ #define PKT_LI_VN_MODE(li, vn, md) \ ((u_char)((((li) << 6) & 0xc0) | (((vn) << 3) & 0x38) | ((md) & 0x7))) /* * Dealing with stratum. 0 gets mapped to 16 incoming, and back to 0 * on output. */ #define PKT_TO_STRATUM(s) ((u_char)(((s) == (STRATUM_PKT_UNSPEC)) ?\ (STRATUM_UNSPEC) : (s))) #define STRATUM_TO_PKT(s) ((u_char)(((s) == (STRATUM_UNSPEC)) ?\ (STRATUM_PKT_UNSPEC) : (s))) /* * Event codes. Used for reporting errors/events to the control module */ #define PEER_EVENT 0x80 /* this is a peer event */ /* * System event codes */ #define EVNT_UNSPEC 0 /* unspecified */ #define EVNT_SYSRESTART 1 /* system restart */ #define EVNT_SYSFAULT 2 /* wsystem or hardware fault */ #define EVNT_SYNCCHG 3 /* new leap or synch change */ #define EVNT_PEERSTCHG 4 /* new source or stratum */ #define EVNT_CLOCKRESET 5 /* clock reset */ #define EVNT_BADDATETIM 6 /* invalid time or date */ #define EVNT_CLOCKEXCPT 7 /* reference clock exception */ /* * Peer event codes */ #define EVNT_PEERIPERR (1 | PEER_EVENT) /* IP error */ #define EVNT_PEERAUTH (2 | PEER_EVENT) /* authentication failure */ #define EVNT_UNREACH (3 | PEER_EVENT) /* change to unreachable */ #define EVNT_REACH (4 | PEER_EVENT) /* change to reachable */ #define EVNT_PEERCLOCK (5 | PEER_EVENT) /* clock exception */ /* * Clock event codes */ #define CEVNT_NOMINAL 0 /* unspecified */ #define CEVNT_TIMEOUT 1 /* poll timeout */ #define CEVNT_BADREPLY 2 /* bad reply format */ #define CEVNT_FAULT 3 /* hardware or software fault */ #define CEVNT_PROP 4 /* propagation failure */ #define CEVNT_BADDATE 5 /* bad date format or value */ #define CEVNT_BADTIME 6 /* bad time format or value */ #define CEVNT_MAX CEVNT_BADTIME /* * Very misplaced value. Default port through which we send traps. */ #define TRAPPORT 18447 /* * To speed lookups, peers are hashed by the low order bits of the * remote IP address. These definitions relate to that. */ #define HASH_SIZE 32 #define HASH_MASK (HASH_SIZE-1) #define HASH_ADDR(src) ((SRCADR((src))^(SRCADR((src))>>8)) & HASH_MASK) /* * How we randomize polls. The poll interval is a power of two. * We chose a random value which is between 1/4 and 3/4 of the * poll interval we would normally use and which is an even multiple * of the EVENT_TIMEOUT. The random number routine, given an argument * spread value of n, returns an integer between 0 and (1< (b)) ? (a) : (b)) #define min3(a,b,c) min(min((a),(b)), (c)) /* * Configuration items. These are for the protocol module (proto_config()) */ #define PROTO_BROADCLIENT 1 #define PROTO_PRECISION 2 /* (not used) */ #define PROTO_AUTHENTICATE 3 #define PROTO_BROADDELAY 4 #define PROTO_AUTHDELAY 5 /* (not used) */ #define PROTO_MULTICAST_ADD 6 #define PROTO_MULTICAST_DEL 7 #define PROTO_NTP 8 #define PROTO_KERNEL 9 #define PROTO_MONITOR 10 #define PROTO_FILEGEN 11 #define PROTO_PPS 12 #define PROTO_CAL 13 /* * Configuration items for the loop filter */ #define LOOP_DRIFTINIT 1 /* set initial frequency offset */ #define LOOP_DRIFTCOMP 2 /* set frequency offset */ #define LOOP_MAX 3 /* set step offset */ #define LOOP_PANIC 4 /* set panic offseet */ #define LOOP_PHI 5 /* set dispersion rate */ #define LOOP_MINSTEP 6 /* set step timeout */ #define LOOP_MINPOLL 7 /* set min poll interval (log2 s) */ #define LOOP_ALLAN 8 /* set minimum Allan intercept */ #define LOOP_HUFFPUFF 9 /* set huff-n'-puff filter length */ /* * Configuration items for the stats printer */ #define STATS_FREQ_FILE 1 /* configure drift file */ #define STATS_STATSDIR 2 /* directory prefix for stats files */ #define STATS_PID_FILE 3 /* configure ntpd PID file */ #define MJD_1970 40587 /* MJD for 1 Jan 1970 */ /* * Default parameters. We use these in the absence of something better. */ #define DEFBROADDELAY 4e-3 /* default broadcast offset */ #define INADDR_NTP 0xe0000101 /* NTP multicast address 224.0.1.1 */ /* * Structure used optionally for monitoring when this is turned on. */ struct mon_data { struct mon_data *hash_next; /* next structure in hash list */ struct mon_data *mru_next; /* next structure in MRU list */ struct mon_data *mru_prev; /* previous structure in MRU list */ struct mon_data *fifo_next; /* next structure in FIFO list */ struct mon_data *fifo_prev; /* previous structure in FIFO list */ u_long lastdrop; /* last time dropped due to RES_LIMIT*/ u_long lasttime; /* last time data updated */ u_long firsttime; /* time structure initialized */ u_long count; /* count we have seen */ u_int32 rmtadr; /* address of remote host */ struct interface *interface; /* interface on which this arrived */ u_short rmtport; /* remote port last came from */ u_char mode; /* mode of incoming packet */ u_char version; /* version of incoming packet */ u_char cast_flags; /* flags MDF_?CAST */ }; /* * Values for cast_flags */ #define MDF_UCAST 0x01 /* unicast */ #define MDF_MCAST 0x02 /* multicast */ #define MDF_BCAST 0x04 /* broadcast */ #define MDF_LCAST 0x08 /* localcast */ #define MDF_ACAST 0x10 /* manycast */ #define MDF_BCLNT 0x20 /* broadcast client */ /* * Values used with mon_enabled to indicate reason for enabling monitoring */ #define MON_OFF 0x00 /* no monitoring */ #define MON_ON 0x01 /* monitoring explicitly enabled */ #define MON_RES 0x02 /* implicit monitoring for RES_LIMITED */ /* * Structure used for restrictlist entries */ struct restrictlist { struct restrictlist *next; /* link to next entry */ u_int32 addr; /* host address (host byte order) */ u_int32 mask; /* mask for address (host byte order) */ u_long count; /* number of packets matched */ u_short flags; /* accesslist flags */ u_short mflags; /* match flags */ }; /* * Access flags */ #define RES_IGNORE 0x001 /* ignore if matched */ #define RES_DONTSERVE 0x002 /* don't give him any time */ #define RES_DONTTRUST 0x004 /* don't trust if matched */ #define RES_NOQUERY 0x008 /* don't allow queries if matched */ #define RES_NOMODIFY 0x010 /* don't allow him to modify server */ #define RES_NOPEER 0x020 /* don't allocate memory resources */ #define RES_NOTRAP 0x040 /* don't allow him to set traps */ #define RES_LPTRAP 0x080 /* traps set by him are low priority */ #define RES_LIMITED 0x100 /* limit per net number of clients */ #define RES_VERSION 0x200 /* serve only current version */ #define RES_DEMOBILIZE 0x400 /* demobilize association */ #define RES_ALLFLAGS \ (RES_IGNORE | RES_DONTSERVE | RES_DONTTRUST | RES_NOQUERY | \ RES_NOMODIFY | RES_NOPEER | RES_NOTRAP | RES_LPTRAP | \ RES_LIMITED | RES_VERSION | RES_DEMOBILIZE) /* * Match flags */ #define RESM_INTERFACE 0x1 /* this is an interface */ #define RESM_NTPONLY 0x2 /* match ntp port only */ /* * Restriction configuration ops */ #define RESTRICT_FLAGS 1 /* add flags to restrict entry */ #define RESTRICT_UNFLAG 2 /* remove flags from restrict entry */ #define RESTRICT_REMOVE 3 /* remove a restrict entry */ /* * Experimental alternate selection algorithm identifiers */ #define SELECT_1 1 #define SELECT_2 2 #define SELECT_3 3 #define SELECT_4 4 #define SELECT_5 5 /* * Endpoint structure for the select algorithm */ struct endpoint { double val; /* offset of endpoint */ int type; /* interval entry/exit */ }; /* * Defines for association matching */ #define AM_MODES 10 /* total number of modes */ #define NO_PEER 0 /* action when no peer is found */ /* * Association matching AM[] return codes */ #define AM_ERR -1 #define AM_NOMATCH 0 #define AM_PROCPKT 1 #define AM_FXMIT 2 #define AM_MANYCAST 3 #define AM_NEWPASS 4 #define AM_NEWBCL 5 #define AM_POSSBCL 6 /* NetInfo configuration locations */ #ifdef HAVE_NETINFO #define NETINFO_CONFIG_DIR "/config/ntp" #endif #endif /* NTP_H */