/****************************************************************************** * * Module Name: dsopcode - Dispatcher Op Region support and handling of * "control" opcodes * $Revision: 91 $ * *****************************************************************************/ /****************************************************************************** * * 1. Copyright Notice * * Some or all of this work - Copyright (c) 1999 - 2003, Intel Corp. * All rights reserved. * * 2. License * * 2.1. This is your license from Intel Corp. under its intellectual property * rights. You may have additional license terms from the party that provided * you this software, covering your right to use that party's intellectual * property rights. * * 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a * copy of the source code appearing in this file ("Covered Code") an * irrevocable, perpetual, worldwide license under Intel's copyrights in the * base code distributed originally by Intel ("Original Intel Code") to copy, * make derivatives, distribute, use and display any portion of the Covered * Code in any form, with the right to sublicense such rights; and * * 2.3. Intel grants Licensee a non-exclusive and non-transferable patent * license (with the right to sublicense), under only those claims of Intel * patents that are infringed by the Original Intel Code, to make, use, sell, * offer to sell, and import the Covered Code and derivative works thereof * solely to the minimum extent necessary to exercise the above copyright * license, and in no event shall the patent license extend to any additions * to or modifications of the Original Intel Code. No other license or right * is granted directly or by implication, estoppel or otherwise; * * The above copyright and patent license is granted only if the following * conditions are met: * * 3. Conditions * * 3.1. Redistribution of Source with Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification with rights to further distribute source must include * the above Copyright Notice, the above License, this list of Conditions, * and the following Disclaimer and Export Compliance provision. In addition, * Licensee must cause all Covered Code to which Licensee contributes to * contain a file documenting the changes Licensee made to create that Covered * Code and the date of any change. Licensee must include in that file the * documentation of any changes made by any predecessor Licensee. Licensee * must include a prominent statement that the modification is derived, * directly or indirectly, from Original Intel Code. * * 3.2. Redistribution of Source with no Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification without rights to further distribute source must * include the following Disclaimer and Export Compliance provision in the * documentation and/or other materials provided with distribution. In * addition, Licensee may not authorize further sublicense of source of any * portion of the Covered Code, and must include terms to the effect that the * license from Licensee to its licensee is limited to the intellectual * property embodied in the software Licensee provides to its licensee, and * not to intellectual property embodied in modifications its licensee may * make. * * 3.3. Redistribution of Executable. Redistribution in executable form of any * substantial portion of the Covered Code or modification must reproduce the * above Copyright Notice, and the following Disclaimer and Export Compliance * provision in the documentation and/or other materials provided with the * distribution. * * 3.4. Intel retains all right, title, and interest in and to the Original * Intel Code. * * 3.5. Neither the name Intel nor any other trademark owned or controlled by * Intel shall be used in advertising or otherwise to promote the sale, use or * other dealings in products derived from or relating to the Covered Code * without prior written authorization from Intel. * * 4. Disclaimer and Export Compliance * * 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED * HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE * IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, * INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY * UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY * IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A * PARTICULAR PURPOSE. * * 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES * OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR * COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, * SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY * CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL * HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS * SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY * LIMITED REMEDY. * * 4.3. Licensee shall not export, either directly or indirectly, any of this * software or system incorporating such software without first obtaining any * required license or other approval from the U. S. Department of Commerce or * any other agency or department of the United States Government. In the * event Licensee exports any such software from the United States or * re-exports any such software from a foreign destination, Licensee shall * ensure that the distribution and export/re-export of the software is in * compliance with all laws, regulations, orders, or other restrictions of the * U.S. Export Administration Regulations. Licensee agrees that neither it nor * any of its subsidiaries will export/re-export any technical data, process, * software, or service, directly or indirectly, to any country for which the * United States government or any agency thereof requires an export license, * other governmental approval, or letter of assurance, without first obtaining * such license, approval or letter. * *****************************************************************************/ #define __DSOPCODE_C__ #include "acpi.h" #include "acparser.h" #include "amlcode.h" #include "acdispat.h" #include "acinterp.h" #include "acnamesp.h" #include "acevents.h" #define _COMPONENT ACPI_DISPATCHER ACPI_MODULE_NAME ("dsopcode") /***************************************************************************** * * FUNCTION: AcpiDsExecuteArguments * * PARAMETERS: Node - Parent NS node * AmlLength - Length of executable AML * AmlStart - Pointer to the AML * * RETURN: Status. * * DESCRIPTION: Late (deferred) execution of region or field arguments * ****************************************************************************/ ACPI_STATUS AcpiDsExecuteArguments ( ACPI_NAMESPACE_NODE *Node, ACPI_NAMESPACE_NODE *ScopeNode, UINT32 AmlLength, UINT8 *AmlStart) { ACPI_STATUS Status; ACPI_PARSE_OBJECT *Op; ACPI_WALK_STATE *WalkState; ACPI_PARSE_OBJECT *Arg; ACPI_FUNCTION_TRACE ("DsExecuteArguments"); /* * Allocate a new parser op to be the root of the parsed tree */ Op = AcpiPsAllocOp (AML_INT_EVAL_SUBTREE_OP); if (!Op) { return_ACPI_STATUS (AE_NO_MEMORY); } /* Save the Node for use in AcpiPsParseAml */ Op->Common.Node = ScopeNode; /* Create and initialize a new parser state */ WalkState = AcpiDsCreateWalkState (0, NULL, NULL, NULL); if (!WalkState) { return_ACPI_STATUS (AE_NO_MEMORY); } Status = AcpiDsInitAmlWalk (WalkState, Op, NULL, AmlStart, AmlLength, NULL, NULL, 1); if (ACPI_FAILURE (Status)) { AcpiDsDeleteWalkState (WalkState); return_ACPI_STATUS (Status); } /* Mark this parse as a deferred opcode */ WalkState->ParseFlags = ACPI_PARSE_DEFERRED_OP; WalkState->DeferredNode = Node; /* Pass1: Parse the entire declaration */ Status = AcpiPsParseAml (WalkState); if (ACPI_FAILURE (Status)) { AcpiPsDeleteParseTree (Op); return_ACPI_STATUS (Status); } /* Get and init the Op created above */ Arg = Op->Common.Value.Arg; Op->Common.Node = Node; Arg->Common.Node = Node; AcpiPsDeleteParseTree (Op); /* Evaluate the deferred arguments */ Op = AcpiPsAllocOp (AML_INT_EVAL_SUBTREE_OP); if (!Op) { return_ACPI_STATUS (AE_NO_MEMORY); } Op->Common.Node = ScopeNode; /* Create and initialize a new parser state */ WalkState = AcpiDsCreateWalkState (0, NULL, NULL, NULL); if (!WalkState) { return_ACPI_STATUS (AE_NO_MEMORY); } /* Execute the opcode and arguments */ Status = AcpiDsInitAmlWalk (WalkState, Op, NULL, AmlStart, AmlLength, NULL, NULL, 3); if (ACPI_FAILURE (Status)) { AcpiDsDeleteWalkState (WalkState); return_ACPI_STATUS (Status); } /* Mark this execution as a deferred opcode */ WalkState->DeferredNode = Node; Status = AcpiPsParseAml (WalkState); AcpiPsDeleteParseTree (Op); return_ACPI_STATUS (Status); } /***************************************************************************** * * FUNCTION: AcpiDsGetBufferFieldArguments * * PARAMETERS: ObjDesc - A valid BufferField object * * RETURN: Status. * * DESCRIPTION: Get BufferField Buffer and Index. This implements the late * evaluation of these field attributes. * ****************************************************************************/ ACPI_STATUS AcpiDsGetBufferFieldArguments ( ACPI_OPERAND_OBJECT *ObjDesc) { ACPI_OPERAND_OBJECT *ExtraDesc; ACPI_NAMESPACE_NODE *Node; ACPI_STATUS Status; ACPI_FUNCTION_TRACE_PTR ("DsGetBufferFieldArguments", ObjDesc); if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID) { return_ACPI_STATUS (AE_OK); } /* Get the AML pointer (method object) and BufferField node */ ExtraDesc = AcpiNsGetSecondaryObject (ObjDesc); Node = ObjDesc->BufferField.Node; ACPI_DEBUG_EXEC(AcpiUtDisplayInitPathname (ACPI_TYPE_BUFFER_FIELD, Node, NULL)); ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n", AcpiUtGetNodeName (Node))); /* Execute the AML code for the TermArg arguments */ Status = AcpiDsExecuteArguments (Node, AcpiNsGetParentNode (Node), ExtraDesc->Extra.AmlLength, ExtraDesc->Extra.AmlStart); return_ACPI_STATUS (Status); } /***************************************************************************** * * FUNCTION: AcpiDsGetBufferArguments * * PARAMETERS: ObjDesc - A valid Buffer object * * RETURN: Status. * * DESCRIPTION: Get Buffer length and initializer byte list. This implements * the late evaluation of these attributes. * ****************************************************************************/ ACPI_STATUS AcpiDsGetBufferArguments ( ACPI_OPERAND_OBJECT *ObjDesc) { ACPI_NAMESPACE_NODE *Node; ACPI_STATUS Status; ACPI_FUNCTION_TRACE_PTR ("DsGetBufferArguments", ObjDesc); if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID) { return_ACPI_STATUS (AE_OK); } /* Get the Buffer node */ Node = ObjDesc->Buffer.Node; if (!Node) { ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No pointer back to NS node in buffer %p\n", ObjDesc)); return_ACPI_STATUS (AE_AML_INTERNAL); } ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Buffer Arg Init\n")); /* Execute the AML code for the TermArg arguments */ Status = AcpiDsExecuteArguments (Node, Node, ObjDesc->Buffer.AmlLength, ObjDesc->Buffer.AmlStart); return_ACPI_STATUS (Status); } /***************************************************************************** * * FUNCTION: AcpiDsGetPackageArguments * * PARAMETERS: ObjDesc - A valid Package object * * RETURN: Status. * * DESCRIPTION: Get Package length and initializer byte list. This implements * the late evaluation of these attributes. * ****************************************************************************/ ACPI_STATUS AcpiDsGetPackageArguments ( ACPI_OPERAND_OBJECT *ObjDesc) { ACPI_NAMESPACE_NODE *Node; ACPI_STATUS Status; ACPI_FUNCTION_TRACE_PTR ("DsGetPackageArguments", ObjDesc); if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID) { return_ACPI_STATUS (AE_OK); } /* Get the Package node */ Node = ObjDesc->Package.Node; if (!Node) { ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No pointer back to NS node in package %p\n", ObjDesc)); return_ACPI_STATUS (AE_AML_INTERNAL); } ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Package Arg Init\n")); /* Execute the AML code for the TermArg arguments */ Status = AcpiDsExecuteArguments (Node, Node, ObjDesc->Package.AmlLength, ObjDesc->Package.AmlStart); return_ACPI_STATUS (Status); } /***************************************************************************** * * FUNCTION: AcpiDsGetRegionArguments * * PARAMETERS: ObjDesc - A valid region object * * RETURN: Status. * * DESCRIPTION: Get region address and length. This implements the late * evaluation of these region attributes. * ****************************************************************************/ ACPI_STATUS AcpiDsGetRegionArguments ( ACPI_OPERAND_OBJECT *ObjDesc) { ACPI_NAMESPACE_NODE *Node; ACPI_STATUS Status; ACPI_OPERAND_OBJECT *ExtraDesc; ACPI_FUNCTION_TRACE_PTR ("DsGetRegionArguments", ObjDesc); if (ObjDesc->Region.Flags & AOPOBJ_DATA_VALID) { return_ACPI_STATUS (AE_OK); } ExtraDesc = AcpiNsGetSecondaryObject (ObjDesc); if (!ExtraDesc) { return_ACPI_STATUS (AE_NOT_EXIST); } /* Get the Region node */ Node = ObjDesc->Region.Node; ACPI_DEBUG_EXEC (AcpiUtDisplayInitPathname (ACPI_TYPE_REGION, Node, NULL)); ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n", AcpiUtGetNodeName (Node), ExtraDesc->Extra.AmlStart)); /* Execute the argument AML */ Status = AcpiDsExecuteArguments (Node, AcpiNsGetParentNode (Node), ExtraDesc->Extra.AmlLength, ExtraDesc->Extra.AmlStart); return_ACPI_STATUS (Status); } /***************************************************************************** * * FUNCTION: AcpiDsInitializeRegion * * PARAMETERS: Op - A valid region Op object * * RETURN: Status * * DESCRIPTION: Front end to EvInitializeRegion * ****************************************************************************/ ACPI_STATUS AcpiDsInitializeRegion ( ACPI_HANDLE ObjHandle) { ACPI_OPERAND_OBJECT *ObjDesc; ACPI_STATUS Status; ObjDesc = AcpiNsGetAttachedObject (ObjHandle); /* Namespace is NOT locked */ Status = AcpiEvInitializeRegion (ObjDesc, FALSE); return (Status); } /***************************************************************************** * * FUNCTION: AcpiDsInitBufferField * * PARAMETERS: AmlOpcode - CreateXxxField * ObjDesc - BufferField object * BufferDesc - Host Buffer * OffsetDesc - Offset into buffer * Length - Length of field (CREATE_FIELD_OP only) * Result - Where to store the result * * RETURN: Status * * DESCRIPTION: Perform actual initialization of a buffer field * ****************************************************************************/ ACPI_STATUS AcpiDsInitBufferField ( UINT16 AmlOpcode, ACPI_OPERAND_OBJECT *ObjDesc, ACPI_OPERAND_OBJECT *BufferDesc, ACPI_OPERAND_OBJECT *OffsetDesc, ACPI_OPERAND_OBJECT *LengthDesc, ACPI_OPERAND_OBJECT *ResultDesc) { UINT32 Offset; UINT32 BitOffset; UINT32 BitCount; UINT8 FieldFlags; ACPI_STATUS Status; ACPI_FUNCTION_TRACE_PTR ("DsInitBufferField", ObjDesc); /* Host object must be a Buffer */ if (ACPI_GET_OBJECT_TYPE (BufferDesc) != ACPI_TYPE_BUFFER) { ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Target of Create Field is not a Buffer object - %s\n", AcpiUtGetObjectTypeName (BufferDesc))); Status = AE_AML_OPERAND_TYPE; goto Cleanup; } /* * The last parameter to all of these opcodes (ResultDesc) started * out as a NameString, and should therefore now be a NS node * after resolution in AcpiExResolveOperands(). */ if (ACPI_GET_DESCRIPTOR_TYPE (ResultDesc) != ACPI_DESC_TYPE_NAMED) { ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "(%s) destination not a NS Node [%s]\n", AcpiPsGetOpcodeName (AmlOpcode), AcpiUtGetDescriptorName (ResultDesc))); Status = AE_AML_OPERAND_TYPE; goto Cleanup; } Offset = (UINT32) OffsetDesc->Integer.Value; /* * Setup the Bit offsets and counts, according to the opcode */ switch (AmlOpcode) { case AML_CREATE_FIELD_OP: /* Offset is in bits, count is in bits */ BitOffset = Offset; BitCount = (UINT32) LengthDesc->Integer.Value; FieldFlags = AML_FIELD_ACCESS_BYTE; break; case AML_CREATE_BIT_FIELD_OP: /* Offset is in bits, Field is one bit */ BitOffset = Offset; BitCount = 1; FieldFlags = AML_FIELD_ACCESS_BYTE; break; case AML_CREATE_BYTE_FIELD_OP: /* Offset is in bytes, field is one byte */ BitOffset = 8 * Offset; BitCount = 8; FieldFlags = AML_FIELD_ACCESS_BYTE; break; case AML_CREATE_WORD_FIELD_OP: /* Offset is in bytes, field is one word */ BitOffset = 8 * Offset; BitCount = 16; FieldFlags = AML_FIELD_ACCESS_WORD; break; case AML_CREATE_DWORD_FIELD_OP: /* Offset is in bytes, field is one dword */ BitOffset = 8 * Offset; BitCount = 32; FieldFlags = AML_FIELD_ACCESS_DWORD; break; case AML_CREATE_QWORD_FIELD_OP: /* Offset is in bytes, field is one qword */ BitOffset = 8 * Offset; BitCount = 64; FieldFlags = AML_FIELD_ACCESS_QWORD; break; default: ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown field creation opcode %02x\n", AmlOpcode)); Status = AE_AML_BAD_OPCODE; goto Cleanup; } /* Entire field must fit within the current length of the buffer */ if ((BitOffset + BitCount) > (8 * (UINT32) BufferDesc->Buffer.Length)) { ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Field [%4.4s] size %d exceeds Buffer [%4.4s] size %d (bits)\n", AcpiUtGetNodeName (ResultDesc), BitOffset + BitCount, AcpiUtGetNodeName (BufferDesc->Buffer.Node), 8 * (UINT32) BufferDesc->Buffer.Length)); Status = AE_AML_BUFFER_LIMIT; goto Cleanup; } /* * Initialize areas of the field object that are common to all fields * For FieldFlags, use LOCK_RULE = 0 (NO_LOCK), UPDATE_RULE = 0 (UPDATE_PRESERVE) */ Status = AcpiExPrepCommonFieldObject (ObjDesc, FieldFlags, 0, BitOffset, BitCount); if (ACPI_FAILURE (Status)) { goto Cleanup; } ObjDesc->BufferField.BufferObj = BufferDesc; /* Reference count for BufferDesc inherits ObjDesc count */ BufferDesc->Common.ReferenceCount = (UINT16) (BufferDesc->Common.ReferenceCount + ObjDesc->Common.ReferenceCount); Cleanup: /* Always delete the operands */ AcpiUtRemoveReference (OffsetDesc); AcpiUtRemoveReference (BufferDesc); if (AmlOpcode == AML_CREATE_FIELD_OP) { AcpiUtRemoveReference (LengthDesc); } /* On failure, delete the result descriptor */ if (ACPI_FAILURE (Status)) { AcpiUtRemoveReference (ResultDesc); /* Result descriptor */ } else { /* Now the address and length are valid for this BufferField */ ObjDesc->BufferField.Flags |= AOPOBJ_DATA_VALID; } return_ACPI_STATUS (Status); } /***************************************************************************** * * FUNCTION: AcpiDsEvalBufferFieldOperands * * PARAMETERS: WalkState - Current walk * Op - A valid BufferField Op object * * RETURN: Status * * DESCRIPTION: Get BufferField Buffer and Index * Called from AcpiDsExecEndOp during BufferField parse tree walk * ****************************************************************************/ ACPI_STATUS AcpiDsEvalBufferFieldOperands ( ACPI_WALK_STATE *WalkState, ACPI_PARSE_OBJECT *Op) { ACPI_STATUS Status; ACPI_OPERAND_OBJECT *ObjDesc; ACPI_NAMESPACE_NODE *Node; ACPI_PARSE_OBJECT *NextOp; ACPI_FUNCTION_TRACE_PTR ("DsEvalBufferFieldOperands", Op); /* * This is where we evaluate the address and length fields of the * CreateXxxField declaration */ Node = Op->Common.Node; /* NextOp points to the op that holds the Buffer */ NextOp = Op->Common.Value.Arg; /* Evaluate/create the address and length operands */ Status = AcpiDsCreateOperands (WalkState, NextOp); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } ObjDesc = AcpiNsGetAttachedObject (Node); if (!ObjDesc) { return_ACPI_STATUS (AE_NOT_EXIST); } /* Resolve the operands */ Status = AcpiExResolveOperands (Op->Common.AmlOpcode, ACPI_WALK_OPERANDS, WalkState); ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE, AcpiPsGetOpcodeName (Op->Common.AmlOpcode), WalkState->NumOperands, "after AcpiExResolveOperands"); if (ACPI_FAILURE (Status)) { ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "(%s) bad operand(s) (%X)\n", AcpiPsGetOpcodeName (Op->Common.AmlOpcode), Status)); return_ACPI_STATUS (Status); } /* Initialize the Buffer Field */ if (Op->Common.AmlOpcode == AML_CREATE_FIELD_OP) { /* NOTE: Slightly different operands for this opcode */ Status = AcpiDsInitBufferField (Op->Common.AmlOpcode, ObjDesc, WalkState->Operands[0], WalkState->Operands[1], WalkState->Operands[2], WalkState->Operands[3]); } else { /* All other, CreateXxxField opcodes */ Status = AcpiDsInitBufferField (Op->Common.AmlOpcode, ObjDesc, WalkState->Operands[0], WalkState->Operands[1], NULL, WalkState->Operands[2]); } return_ACPI_STATUS (Status); } /***************************************************************************** * * FUNCTION: AcpiDsEvalRegionOperands * * PARAMETERS: WalkState - Current walk * Op - A valid region Op object * * RETURN: Status * * DESCRIPTION: Get region address and length * Called from AcpiDsExecEndOp during OpRegion parse tree walk * ****************************************************************************/ ACPI_STATUS AcpiDsEvalRegionOperands ( ACPI_WALK_STATE *WalkState, ACPI_PARSE_OBJECT *Op) { ACPI_STATUS Status; ACPI_OPERAND_OBJECT *ObjDesc; ACPI_OPERAND_OBJECT *OperandDesc; ACPI_NAMESPACE_NODE *Node; ACPI_PARSE_OBJECT *NextOp; ACPI_FUNCTION_TRACE_PTR ("DsEvalRegionOperands", Op); /* * This is where we evaluate the address and length fields of the OpRegion declaration */ Node = Op->Common.Node; /* NextOp points to the op that holds the SpaceID */ NextOp = Op->Common.Value.Arg; /* NextOp points to address op */ NextOp = NextOp->Common.Next; /* Evaluate/create the address and length operands */ Status = AcpiDsCreateOperands (WalkState, NextOp); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* Resolve the length and address operands to numbers */ Status = AcpiExResolveOperands (Op->Common.AmlOpcode, ACPI_WALK_OPERANDS, WalkState); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE, AcpiPsGetOpcodeName (Op->Common.AmlOpcode), 1, "after AcpiExResolveOperands"); ObjDesc = AcpiNsGetAttachedObject (Node); if (!ObjDesc) { return_ACPI_STATUS (AE_NOT_EXIST); } /* * Get the length operand and save it * (at Top of stack) */ OperandDesc = WalkState->Operands[WalkState->NumOperands - 1]; ObjDesc->Region.Length = (UINT32) OperandDesc->Integer.Value; AcpiUtRemoveReference (OperandDesc); /* * Get the address and save it * (at top of stack - 1) */ OperandDesc = WalkState->Operands[WalkState->NumOperands - 2]; ObjDesc->Region.Address = (ACPI_PHYSICAL_ADDRESS) OperandDesc->Integer.Value; AcpiUtRemoveReference (OperandDesc); ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n", ObjDesc, ACPI_FORMAT_UINT64 (ObjDesc->Region.Address), ObjDesc->Region.Length)); /* Now the address and length are valid for this opregion */ ObjDesc->Region.Flags |= AOPOBJ_DATA_VALID; return_ACPI_STATUS (Status); } /***************************************************************************** * * FUNCTION: AcpiDsEvalDataObjectOperands * * PARAMETERS: WalkState - Current walk * Op - A valid DataObject Op object * ObjDesc - DataObject * * RETURN: Status * * DESCRIPTION: Get the operands and complete the following data objec types: * Buffer * Package * ****************************************************************************/ ACPI_STATUS AcpiDsEvalDataObjectOperands ( ACPI_WALK_STATE *WalkState, ACPI_PARSE_OBJECT *Op, ACPI_OPERAND_OBJECT *ObjDesc) { ACPI_STATUS Status; ACPI_OPERAND_OBJECT *ArgDesc; UINT32 Length; ACPI_FUNCTION_TRACE ("DsEvalDataObjectOperands"); /* The first operand (for all of these data objects) is the length */ Status = AcpiDsCreateOperand (WalkState, Op->Common.Value.Arg, 1); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } Status = AcpiExResolveOperands (WalkState->Opcode, &(WalkState->Operands [WalkState->NumOperands -1]), WalkState); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* Extract length operand */ ArgDesc = WalkState->Operands [WalkState->NumOperands - 1]; Length = (UINT32) ArgDesc->Integer.Value; /* Cleanup for length operand */ Status = AcpiDsObjStackPop (1, WalkState); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } AcpiUtRemoveReference (ArgDesc); /* * Create the actual data object */ switch (Op->Common.AmlOpcode) { case AML_BUFFER_OP: Status = AcpiDsBuildInternalBufferObj (WalkState, Op, Length, &ObjDesc); break; case AML_PACKAGE_OP: case AML_VAR_PACKAGE_OP: Status = AcpiDsBuildInternalPackageObj (WalkState, Op, Length, &ObjDesc); break; default: return_ACPI_STATUS (AE_AML_BAD_OPCODE); } if (ACPI_SUCCESS (Status)) { /* * Return the object in the WalkState, unless the parent is a package -- * in this case, the return object will be stored in the parse tree * for the package. */ if ((!Op->Common.Parent) || ((Op->Common.Parent->Common.AmlOpcode != AML_PACKAGE_OP) && (Op->Common.Parent->Common.AmlOpcode != AML_VAR_PACKAGE_OP) && (Op->Common.Parent->Common.AmlOpcode != AML_NAME_OP))) { WalkState->ResultObj = ObjDesc; } } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiDsExecBeginControlOp * * PARAMETERS: WalkList - The list that owns the walk stack * Op - The control Op * * RETURN: Status * * DESCRIPTION: Handles all control ops encountered during control method * execution. * ******************************************************************************/ ACPI_STATUS AcpiDsExecBeginControlOp ( ACPI_WALK_STATE *WalkState, ACPI_PARSE_OBJECT *Op) { ACPI_STATUS Status = AE_OK; ACPI_GENERIC_STATE *ControlState; ACPI_FUNCTION_NAME ("DsExecBeginControlOp"); ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", Op, Op->Common.AmlOpcode, WalkState)); switch (Op->Common.AmlOpcode) { case AML_IF_OP: case AML_WHILE_OP: /* * IF/WHILE: Create a new control state to manage these * constructs. We need to manage these as a stack, in order * to handle nesting. */ ControlState = AcpiUtCreateControlState (); if (!ControlState) { Status = AE_NO_MEMORY; break; } /* * Save a pointer to the predicate for multiple executions * of a loop */ ControlState->Control.AmlPredicateStart = WalkState->ParserState.Aml - 1; ControlState->Control.PackageEnd = WalkState->ParserState.PkgEnd; ControlState->Control.Opcode = Op->Common.AmlOpcode; /* Push the control state on this walk's control stack */ AcpiUtPushGenericState (&WalkState->ControlState, ControlState); break; case AML_ELSE_OP: /* Predicate is in the state object */ /* If predicate is true, the IF was executed, ignore ELSE part */ if (WalkState->LastPredicate) { Status = AE_CTRL_TRUE; } break; case AML_RETURN_OP: break; default: break; } return (Status); } /******************************************************************************* * * FUNCTION: AcpiDsExecEndControlOp * * PARAMETERS: WalkList - The list that owns the walk stack * Op - The control Op * * RETURN: Status * * DESCRIPTION: Handles all control ops encountered during control method * execution. * ******************************************************************************/ ACPI_STATUS AcpiDsExecEndControlOp ( ACPI_WALK_STATE *WalkState, ACPI_PARSE_OBJECT *Op) { ACPI_STATUS Status = AE_OK; ACPI_GENERIC_STATE *ControlState; ACPI_FUNCTION_NAME ("DsExecEndControlOp"); switch (Op->Common.AmlOpcode) { case AML_IF_OP: ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", Op)); /* * Save the result of the predicate in case there is an * ELSE to come */ WalkState->LastPredicate = (BOOLEAN) WalkState->ControlState->Common.Value; /* * Pop the control state that was created at the start * of the IF and free it */ ControlState = AcpiUtPopGenericState (&WalkState->ControlState); AcpiUtDeleteGenericState (ControlState); break; case AML_ELSE_OP: break; case AML_WHILE_OP: ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", Op)); if (WalkState->ControlState->Common.Value) { /* Predicate was true, go back and evaluate it again! */ Status = AE_CTRL_PENDING; } ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[WHILE_OP] termination! Op=%p\n", Op)); /* Pop this control state and free it */ ControlState = AcpiUtPopGenericState (&WalkState->ControlState); WalkState->AmlLastWhile = ControlState->Control.AmlPredicateStart; AcpiUtDeleteGenericState (ControlState); break; case AML_RETURN_OP: ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[RETURN_OP] Op=%p Arg=%p\n",Op, Op->Common.Value.Arg)); /* * One optional operand -- the return value * It can be either an immediate operand or a result that * has been bubbled up the tree */ if (Op->Common.Value.Arg) { /* Return statement has an immediate operand */ Status = AcpiDsCreateOperands (WalkState, Op->Common.Value.Arg); if (ACPI_FAILURE (Status)) { return (Status); } /* * If value being returned is a Reference (such as * an arg or local), resolve it now because it may * cease to exist at the end of the method. */ Status = AcpiExResolveToValue (&WalkState->Operands [0], WalkState); if (ACPI_FAILURE (Status)) { return (Status); } /* * Get the return value and save as the last result * value. This is the only place where WalkState->ReturnDesc * is set to anything other than zero! */ WalkState->ReturnDesc = WalkState->Operands[0]; } else if ((WalkState->Results) && (WalkState->Results->Results.NumResults > 0)) { /* * The return value has come from a previous calculation. * * If value being returned is a Reference (such as * an arg or local), resolve it now because it may * cease to exist at the end of the method. * * Allow references created by the Index operator to return unchanged. */ if ((ACPI_GET_DESCRIPTOR_TYPE (WalkState->Results->Results.ObjDesc[0]) == ACPI_DESC_TYPE_OPERAND) && (ACPI_GET_OBJECT_TYPE (WalkState->Results->Results.ObjDesc [0]) == ACPI_TYPE_LOCAL_REFERENCE) && ((WalkState->Results->Results.ObjDesc [0])->Reference.Opcode != AML_INDEX_OP)) { Status = AcpiExResolveToValue (&WalkState->Results->Results.ObjDesc [0], WalkState); if (ACPI_FAILURE (Status)) { return (Status); } } WalkState->ReturnDesc = WalkState->Results->Results.ObjDesc [0]; } else { /* No return operand */ if (WalkState->NumOperands) { AcpiUtRemoveReference (WalkState->Operands [0]); } WalkState->Operands [0] = NULL; WalkState->NumOperands = 0; WalkState->ReturnDesc = NULL; } ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Completed RETURN_OP State=%p, RetVal=%p\n", WalkState, WalkState->ReturnDesc)); /* End the control method execution right now */ Status = AE_CTRL_TERMINATE; break; case AML_NOOP_OP: /* Just do nothing! */ break; case AML_BREAK_POINT_OP: /* Call up to the OS service layer to handle this */ Status = AcpiOsSignal (ACPI_SIGNAL_BREAKPOINT, "Executed AML Breakpoint opcode"); /* If and when it returns, all done. */ break; case AML_BREAK_OP: case AML_CONTINUE_OP: /* ACPI 2.0 */ /* Pop and delete control states until we find a while */ while (WalkState->ControlState && (WalkState->ControlState->Control.Opcode != AML_WHILE_OP)) { ControlState = AcpiUtPopGenericState (&WalkState->ControlState); AcpiUtDeleteGenericState (ControlState); } /* No while found? */ if (!WalkState->ControlState) { return (AE_AML_NO_WHILE); } /* Was: WalkState->AmlLastWhile = WalkState->ControlState->Control.AmlPredicateStart; */ WalkState->AmlLastWhile = WalkState->ControlState->Control.PackageEnd; /* Return status depending on opcode */ if (Op->Common.AmlOpcode == AML_BREAK_OP) { Status = AE_CTRL_BREAK; } else { Status = AE_CTRL_CONTINUE; } break; default: ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown control opcode=%X Op=%p\n", Op->Common.AmlOpcode, Op)); Status = AE_AML_BAD_OPCODE; break; } return (Status); }