/* Data structures associated with breakpoints in GDB. Copyright (C) 1992, 93, 94, 95, 96, 98, 1999 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #if !defined (BREAKPOINT_H) #define BREAKPOINT_H 1 #include "frame.h" #include "value.h" /* This is the maximum number of bytes a breakpoint instruction can take. Feel free to increase it. It's just used in a few places to size arrays that should be independent of the target architecture. */ #define BREAKPOINT_MAX 16 /* Type of breakpoint. */ /* FIXME In the future, we should fold all other breakpoint-like things into here. This includes: * single-step (for machines where we have to simulate single stepping) (probably, though perhaps it is better for it to look as much as possible like a single-step to wait_for_inferior). */ enum bptype { bp_none = 0, /* Eventpoint has been deleted. */ bp_breakpoint, /* Normal breakpoint */ bp_hardware_breakpoint, /* Hardware assisted breakpoint */ bp_until, /* used by until command */ bp_finish, /* used by finish command */ bp_watchpoint, /* Watchpoint */ bp_hardware_watchpoint, /* Hardware assisted watchpoint */ bp_read_watchpoint, /* read watchpoint, (hardware assisted) */ bp_access_watchpoint, /* access watchpoint, (hardware assisted) */ bp_longjmp, /* secret breakpoint to find longjmp() */ bp_longjmp_resume, /* secret breakpoint to escape longjmp() */ /* Used by wait_for_inferior for stepping over subroutine calls, for stepping over signal handlers, and for skipping prologues. */ bp_step_resume, /* Used by wait_for_inferior for stepping over signal handlers. */ bp_through_sigtramp, /* Used to detect when a watchpoint expression has gone out of scope. These breakpoints are usually not visible to the user. This breakpoint has some interesting properties: 1) There's always a 1:1 mapping between watchpoints on local variables and watchpoint_scope breakpoints. 2) It automatically deletes itself and the watchpoint it's associated with when hit. 3) It can never be disabled. */ bp_watchpoint_scope, /* The breakpoint at the end of a call dummy. */ /* FIXME: What if the function we are calling longjmp()s out of the call, or the user gets out with the "return" command? We currently have no way of cleaning up the breakpoint in these (obscure) situations. (Probably can solve this by noticing longjmp, "return", etc., it's similar to noticing when a watchpoint on a local variable goes out of scope (with hardware support for watchpoints)). */ bp_call_dummy, /* Some dynamic linkers (HP, maybe Solaris) can arrange for special code in the inferior to run when significant events occur in the dynamic linker (for example a library is loaded or unloaded). By placing a breakpoint in this magic code GDB will get control when these significant events occur. GDB can then re-examine the dynamic linker's data structures to discover any newly loaded dynamic libraries. */ bp_shlib_event, /* These breakpoints are used to implement the "catch load" command on platforms whose dynamic linkers support such functionality. */ bp_catch_load, /* These breakpoints are used to implement the "catch unload" command on platforms whose dynamic linkers support such functionality. */ bp_catch_unload, /* These are not really breakpoints, but are catchpoints that implement the "catch fork", "catch vfork" and "catch exec" commands on platforms whose kernel support such functionality. (I.e., kernels which can raise an event when a fork or exec occurs, as opposed to the debugger setting breakpoints on functions named "fork" or "exec".) */ bp_catch_fork, bp_catch_vfork, bp_catch_exec, /* These are catchpoints to implement "catch catch" and "catch throw" commands for C++ exception handling. */ bp_catch_catch, bp_catch_throw }; /* States of enablement of breakpoint. */ enum enable { disabled, /* The eventpoint is inactive, and cannot trigger. */ enabled, /* The eventpoint is active, and can trigger. */ shlib_disabled, /* The eventpoint's address is within an unloaded solib. The eventpoint will be automatically enabled & reset when that solib is loaded. */ call_disabled /* The eventpoint has been disabled while a call into the inferior is "in flight", because some eventpoints interfere with the implementation of a call on some targets. The eventpoint will be automatically enabled & reset when the call "lands" (either completes, or stops at another eventpoint). */ }; /* Disposition of breakpoint. Ie: what to do after hitting it. */ enum bpdisp { del, /* Delete it */ del_at_next_stop, /* Delete at next stop, whether hit or not */ disable, /* Disable it */ donttouch /* Leave it alone */ }; /* Note that the ->silent field is not currently used by any commands (though the code is in there if it was to be, and set_raw_breakpoint does set it to 0). I implemented it because I thought it would be useful for a hack I had to put in; I'm going to leave it in because I can see how there might be times when it would indeed be useful */ /* This is for a breakpoint or a watchpoint. */ struct breakpoint { struct breakpoint *next; /* Type of breakpoint. */ enum bptype type; /* Zero means disabled; remember the info but don't break here. */ enum enable enable; /* What to do with this breakpoint after we hit it. */ enum bpdisp disposition; /* Number assigned to distinguish breakpoints. */ int number; /* Address to break at, or NULL if not a breakpoint. */ CORE_ADDR address; /* Line number of this address. Only matters if address is non-NULL. */ int line_number; /* Source file name of this address. Only matters if address is non-NULL. */ char *source_file; /* Non-zero means a silent breakpoint (don't print frame info if we stop here). */ unsigned char silent; /* Number of stops at this breakpoint that should be continued automatically before really stopping. */ int ignore_count; /* "Real" contents of byte where breakpoint has been inserted. Valid only when breakpoints are in the program. Under the complete control of the target insert_breakpoint and remove_breakpoint routines. No other code should assume anything about the value(s) here. */ char shadow_contents[BREAKPOINT_MAX]; /* Nonzero if this breakpoint is now inserted. Only matters if address is non-NULL. */ char inserted; /* Nonzero if this is not the first breakpoint in the list for the given address. Only matters if address is non-NULL. */ char duplicate; /* Chain of command lines to execute when this breakpoint is hit. */ struct command_line *commands; /* Stack depth (address of frame). If nonzero, break only if fp equals this. */ CORE_ADDR frame; /* Conditional. Break only if this expression's value is nonzero. */ struct expression *cond; /* String we used to set the breakpoint (malloc'd). Only matters if address is non-NULL. */ char *addr_string; /* Language we used to set the breakpoint. */ enum language language; /* Input radix we used to set the breakpoint. */ int input_radix; /* String form of the breakpoint condition (malloc'd), or NULL if there is no condition. */ char *cond_string; /* String form of exp (malloc'd), or NULL if none. */ char *exp_string; /* The expression we are watching, or NULL if not a watchpoint. */ struct expression *exp; /* The largest block within which it is valid, or NULL if it is valid anywhere (e.g. consists just of global symbols). */ struct block *exp_valid_block; /* Value of the watchpoint the last time we checked it. */ value_ptr val; /* Holds the value chain for a hardware watchpoint expression. */ value_ptr val_chain; /* Holds the address of the related watchpoint_scope breakpoint when using watchpoints on local variables (might the concept of a related breakpoint be useful elsewhere, if not just call it the watchpoint_scope breakpoint or something like that. FIXME). */ struct breakpoint *related_breakpoint; /* Holds the frame address which identifies the frame this watchpoint should be evaluated in, or NULL if the watchpoint should be evaluated on the outermost frame. */ CORE_ADDR watchpoint_frame; /* Thread number for thread-specific breakpoint, or -1 if don't care */ int thread; /* Count of the number of times this breakpoint was taken, dumped with the info, but not used for anything else. Useful for seeing how many times you hit a break prior to the program aborting, so you can back up to just before the abort. */ int hit_count; /* Filename of a dynamically-linked library (dll), used for bp_catch_load and bp_catch_unload (malloc'd), or NULL if any library is significant. */ char * dll_pathname; /* Filename of a dll whose state change (e.g., load or unload) triggered this catchpoint. This field is only vaid immediately after this catchpoint has triggered. */ char * triggered_dll_pathname; /* Process id of a child process whose forking triggered this catchpoint. This field is only vaid immediately after this catchpoint has triggered. */ int forked_inferior_pid; /* Filename of a program whose exec triggered this catchpoint. This field is only vaid immediately after this catchpoint has triggered. */ char * exec_pathname; asection *section; }; /* The following stuff is an abstract data type "bpstat" ("breakpoint status"). This provides the ability to determine whether we have stopped at a breakpoint, and what we should do about it. */ typedef struct bpstats *bpstat; /* Interface: */ /* Clear a bpstat so that it says we are not at any breakpoint. Also free any storage that is part of a bpstat. */ extern void bpstat_clear PARAMS ((bpstat *)); /* Return a copy of a bpstat. Like "bs1 = bs2" but all storage that is part of the bpstat is copied as well. */ extern bpstat bpstat_copy PARAMS ((bpstat)); extern bpstat bpstat_stop_status PARAMS ((CORE_ADDR *, int)); /* This bpstat_what stuff tells wait_for_inferior what to do with a breakpoint (a challenging task). */ enum bpstat_what_main_action { /* Perform various other tests; that is, this bpstat does not say to perform any action (e.g. failed watchpoint and nothing else). */ BPSTAT_WHAT_KEEP_CHECKING, /* Rather than distinguish between noisy and silent stops here, it might be cleaner to have bpstat_print make that decision (also taking into account stop_print_frame and source_only). But the implications are a bit scary (interaction with auto-displays, etc.), so I won't try it. */ /* Stop silently. */ BPSTAT_WHAT_STOP_SILENT, /* Stop and print. */ BPSTAT_WHAT_STOP_NOISY, /* Remove breakpoints, single step once, then put them back in and go back to what we were doing. It's possible that this should be removed from the main_action and put into a separate field, to more cleanly handle BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE. */ BPSTAT_WHAT_SINGLE, /* Set longjmp_resume breakpoint, remove all other breakpoints, and continue. The "remove all other breakpoints" part is required if we are also stepping over another breakpoint as well as doing the longjmp handling. */ BPSTAT_WHAT_SET_LONGJMP_RESUME, /* Clear longjmp_resume breakpoint, then handle as BPSTAT_WHAT_KEEP_CHECKING. */ BPSTAT_WHAT_CLEAR_LONGJMP_RESUME, /* Clear longjmp_resume breakpoint, then handle as BPSTAT_WHAT_SINGLE. */ BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE, /* Clear step resume breakpoint, and keep checking. */ BPSTAT_WHAT_STEP_RESUME, /* Clear through_sigtramp breakpoint, muck with trap_expected, and keep checking. */ BPSTAT_WHAT_THROUGH_SIGTRAMP, /* Check the dynamic linker's data structures for new libraries, then keep checking. */ BPSTAT_WHAT_CHECK_SHLIBS, /* Check the dynamic linker's data structures for new libraries, then resume out of the dynamic linker's callback, stop and print. */ BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK, /* This is just used to keep track of how many enums there are. */ BPSTAT_WHAT_LAST }; struct bpstat_what { enum bpstat_what_main_action main_action; /* Did we hit a call dummy breakpoint? This only goes with a main_action of BPSTAT_WHAT_STOP_SILENT or BPSTAT_WHAT_STOP_NOISY (the concept of continuing from a call dummy without popping the frame is not a useful one). */ int call_dummy; }; /* Tell what to do about this bpstat. */ struct bpstat_what bpstat_what PARAMS ((bpstat)); /* Find the bpstat associated with a breakpoint. NULL otherwise. */ bpstat bpstat_find_breakpoint PARAMS ((bpstat, struct breakpoint *)); /* Find a step_resume breakpoint associated with this bpstat. (If there are multiple step_resume bp's on the list, this function will arbitrarily pick one.) It is an error to use this function if BPSTAT doesn't contain a step_resume breakpoint. See wait_for_inferior's use of this function. */ extern struct breakpoint * bpstat_find_step_resume_breakpoint PARAMS ((bpstat)); /* Nonzero if a signal that we got in wait() was due to circumstances explained by the BS. */ /* Currently that is true if we have hit a breakpoint, or if there is a watchpoint enabled. */ #define bpstat_explains_signal(bs) ((bs) != NULL) /* Nonzero if we should step constantly (e.g. watchpoints on machines without hardware support). This isn't related to a specific bpstat, just to things like whether watchpoints are set. */ extern int bpstat_should_step PARAMS ((void)); /* Nonzero if there are enabled hardware watchpoints. */ extern int bpstat_have_active_hw_watchpoints PARAMS ((void)); /* Print a message indicating what happened. Returns nonzero to say that only the source line should be printed after this (zero return means print the frame as well as the source line). */ extern int bpstat_print PARAMS ((bpstat)); /* Return the breakpoint number of the first breakpoint we are stopped at. *BSP upon return is a bpstat which points to the remaining breakpoints stopped at (but which is not guaranteed to be good for anything but further calls to bpstat_num). Return 0 if passed a bpstat which does not indicate any breakpoints. */ extern int bpstat_num PARAMS ((bpstat *)); /* Perform actions associated with having stopped at *BSP. Actually, we just use this for breakpoint commands. Perhaps other actions will go here later, but this is executed at a late time (from the command loop). */ extern void bpstat_do_actions PARAMS ((bpstat *)); /* Modify BS so that the actions will not be performed. */ extern void bpstat_clear_actions PARAMS ((bpstat)); /* Given a bpstat that records zero or more triggered eventpoints, this function returns another bpstat which contains only the catchpoints on that first list, if any. */ extern void bpstat_get_triggered_catchpoints PARAMS ((bpstat, bpstat *)); /* Implementation: */ struct bpstats { /* Linked list because there can be two breakpoints at the same place, and a bpstat reflects the fact that both have been hit. */ bpstat next; /* Breakpoint that we are at. */ struct breakpoint *breakpoint_at; /* Commands left to be done. */ struct command_line *commands; /* Old value associated with a watchpoint. */ value_ptr old_val; /* Nonzero if this breakpoint tells us to print the frame. */ char print; /* Nonzero if this breakpoint tells us to stop. */ char stop; /* Function called by bpstat_print to print stuff associated with this element of the bpstat chain. Returns 0 or 1 just like bpstat_print, or -1 if it can't deal with it. */ int (*print_it) PARAMS((bpstat bs)); }; enum inf_context { inf_starting, inf_running, inf_exited }; /* Prototypes for breakpoint-related functions. */ #ifdef __STDC__ /* Forward declarations for prototypes */ struct frame_info; #endif extern int breakpoint_here_p PARAMS ((CORE_ADDR)); extern int breakpoint_inserted_here_p PARAMS ((CORE_ADDR)); extern int frame_in_dummy PARAMS ((struct frame_info *)); extern int breakpoint_thread_match PARAMS ((CORE_ADDR, int)); extern void until_break_command PARAMS ((char *, int)); extern void breakpoint_re_set PARAMS ((void)); extern void breakpoint_re_set_thread PARAMS ((struct breakpoint *)); extern int ep_is_exception_catchpoint PARAMS ((struct breakpoint *)); extern struct breakpoint *set_momentary_breakpoint PARAMS ((struct symtab_and_line, struct frame_info *, enum bptype)); extern void set_ignore_count PARAMS ((int, int, int)); extern void set_default_breakpoint PARAMS ((int, CORE_ADDR, struct symtab *, int)); extern void mark_breakpoints_out PARAMS ((void)); extern void breakpoint_init_inferior PARAMS ((enum inf_context)); extern void delete_breakpoint PARAMS ((struct breakpoint *)); extern void breakpoint_auto_delete PARAMS ((bpstat)); extern void breakpoint_clear_ignore_counts PARAMS ((void)); extern void break_command PARAMS ((char *, int)); extern void tbreak_command PARAMS ((char *, int)); extern int insert_breakpoints PARAMS ((void)); extern int remove_breakpoints PARAMS ((void)); /* This function can be used to physically insert eventpoints from the specified traced inferior process, without modifying the breakpoint package's state. This can be useful for those targets which support following the processes of a fork() or vfork() system call, when both of the resulting two processes are to be followed. */ extern int reattach_breakpoints PARAMS ((int)); /* This function can be used to update the breakpoint package's state after an exec() system call has been executed. This function causes the following: - All eventpoints are marked "not inserted". - All eventpoints with a symbolic address are reset such that the symbolic address must be reevaluated before the eventpoints can be reinserted. - The solib breakpoints are explicitly removed from the breakpoint list. - A step-resume breakpoint, if any, is explicitly removed from the breakpoint list. - All eventpoints without a symbolic address are removed from the breakpoint list. */ extern void update_breakpoints_after_exec PARAMS ((void)); /* This function can be used to physically remove hardware breakpoints and watchpoints from the specified traced inferior process, without modifying the breakpoint package's state. This can be useful for those targets which support following the processes of a fork() or vfork() system call, when one of the resulting two processes is to be detached and allowed to run free. It is an error to use this function on the process whose id is inferior_pid. */ extern int detach_breakpoints PARAMS ((int)); extern void enable_longjmp_breakpoint PARAMS ((void)); extern void disable_longjmp_breakpoint PARAMS ((void)); extern void set_longjmp_resume_breakpoint PARAMS ((CORE_ADDR, struct frame_info *)); /* These functions respectively disable or reenable all currently enabled watchpoints. When disabled, the watchpoints are marked call_disabled. When reenabled, they are marked enabled. The intended client of these functions is infcmd.c\run_stack_dummy. The inferior must be stopped, and all breakpoints removed, when these functions are used. The need for these functions is that on some targets (e.g., HP-UX), gdb is unable to unwind through the dummy frame that is pushed as part of the implementation of a call command. Watchpoints can cause the inferior to stop in places where this frame is visible, and that can cause execution control to become very confused. Note that if a user sets breakpoints in an interactively call function, the call_disabled watchpoints will have been reenabled when the first such breakpoint is reached. However, on targets that are unable to unwind through the call dummy frame, watches of stack-based storage may then be deleted, because gdb will believe that their watched storage is out of scope. (Sigh.) */ extern void disable_watchpoints_before_interactive_call_start PARAMS ((void)); extern void enable_watchpoints_after_interactive_call_stop PARAMS ((void)); extern void clear_breakpoint_hit_counts PARAMS ((void)); /* The following are for displays, which aren't really breakpoints, but here is as good a place as any for them. */ extern void disable_current_display PARAMS ((void)); extern void do_displays PARAMS ((void)); extern void disable_display PARAMS ((int)); extern void clear_displays PARAMS ((void)); extern void disable_breakpoint PARAMS ((struct breakpoint *)); extern void enable_breakpoint PARAMS ((struct breakpoint *)); extern void create_solib_event_breakpoint PARAMS ((CORE_ADDR)); extern void remove_solib_event_breakpoints PARAMS ((void)); extern void disable_breakpoints_in_shlibs PARAMS ((int silent)); extern void re_enable_breakpoints_in_shlibs PARAMS ((void)); extern void create_solib_load_event_breakpoint PARAMS ((char *, int, char *, char *)); extern void create_solib_unload_event_breakpoint PARAMS ((char *, int, char *, char *)); extern void create_fork_event_catchpoint PARAMS ((int, char *)); extern void create_vfork_event_catchpoint PARAMS ((int, char *)); extern void create_exec_event_catchpoint PARAMS ((int, char *)); /* This function returns TRUE if ep is a catchpoint. */ extern int ep_is_catchpoint PARAMS ((struct breakpoint *)); /* This function returns TRUE if ep is a catchpoint of a shared library (aka dynamically-linked library) event, such as a library load or unload. */ extern int ep_is_shlib_catchpoint PARAMS ((struct breakpoint *)); extern struct breakpoint *set_breakpoint_sal PARAMS ((struct symtab_and_line)); #endif /* !defined (BREAKPOINT_H) */