/*
 * $OpenBSD: usb_port.h,v 1.18 2000/09/06 22:42:10 rahnds Exp $
 * $NetBSD: usb_port.h,v 1.54 2002/03/28 21:49:19 ichiro Exp $
 * $FreeBSD: src/sys/dev/usb/usb_port.h,v 1.65 2003/11/09 23:54:21 joe Exp $
 * $DragonFly: src/sys/bus/usb/usb_port.h,v 1.8 2004/03/14 17:12:05 joerg Exp $
 */

/* Also already merged from NetBSD:
 *	$NetBSD: usb_port.h,v 1.57 2002/09/27 20:42:01 thorpej Exp $
 *	$NetBSD: usb_port.h,v 1.58 2002/10/01 01:25:26 thorpej Exp $
 */

/*
 * Copyright (c) 1998 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Lennart Augustsson (lennart@augustsson.net) at
 * Carlstedt Research & Technology.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _USB_PORT_H
#define _USB_PORT_H

/*
 * Macro's to cope with the differences between operating systems.
 */

#if defined(__NetBSD__)
/*
 * NetBSD
 */

#include "opt_usbverbose.h"

#define USB_USE_SOFTINTR

#ifdef USB_DEBUG
#define Static
#else
#define Static static
#endif

#define SCSI_MODE_SENSE		MODE_SENSE

typedef struct proc *usb_proc_ptr;

typedef struct device *device_ptr_t;
#define USBBASEDEVICE struct device
#define USBDEV(bdev) (&(bdev))
#define USBDEVNAME(bdev) ((bdev).dv_xname)
#define USBDEVUNIT(bdev) ((bdev).dv_unit)
#define USBDEVPTRNAME(bdevptr) ((bdevptr)->dv_xname)
#define USBGETSOFTC(d) ((void *)(d))

#define DECLARE_USB_DMA_T \
	struct usb_dma_block; \
	typedef struct { \
		struct usb_dma_block *block; \
		u_int offs; \
	} usb_dma_t

typedef struct callout usb_callout_t;
#define usb_callout_init(h)	callout_init(&(h))
#define	usb_callout(h, t, f, d)	callout_reset(&(h), (t), (f), (d))
#define	usb_uncallout(h, f, d)	callout_stop(&(h))

#define usb_kthread_create1	kthread_create1
#define usb_kthread_create	kthread_create

typedef int usb_malloc_type;

#define Ether_ifattach ether_ifattach
#define IF_INPUT(ifp, m) (*(ifp)->if_input)((ifp), (m))

#define logprintf printf

#define	USB_DNAME(dname)	dname
#define USB_DECLARE_DRIVER(dname)  \
int __CONCAT(dname,_match)(struct device *, struct cfdata *, void *); \
void __CONCAT(dname,_attach)(struct device *, struct device *, void *); \
int __CONCAT(dname,_detach)(struct device *, int); \
int __CONCAT(dname,_activate)(struct device *, enum devact); \
\
extern struct cfdriver __CONCAT(dname,_cd); \
\
CFATTACH_DECL(USB_DNAME(dname), \
    sizeof(struct ___CONCAT(dname,_softc)), \
    ___CONCAT(dname,_match), \
    ___CONCAT(dname,_attach), \
    ___CONCAT(dname,_detach), \
    ___CONCAT(dname,_activate))

#define USB_MATCH(dname) \
int __CONCAT(dname,_match)(struct device *parent, struct cfdata *match, void *aux)

#define USB_MATCH_START(dname, uaa) \
	struct usb_attach_arg *uaa = aux

#define USB_ATTACH(dname) \
void __CONCAT(dname,_attach)(struct device *parent, struct device *self, void *aux)

#define USB_ATTACH_START(dname, sc, uaa) \
	struct __CONCAT(dname,_softc) *sc = \
		(struct __CONCAT(dname,_softc) *)self; \
	struct usb_attach_arg *uaa = aux

/* Returns from attach */
#define USB_ATTACH_ERROR_RETURN	return
#define USB_ATTACH_SUCCESS_RETURN	return

#define USB_ATTACH_SETUP printf("\n")

#define USB_DETACH(dname) \
int __CONCAT(dname,_detach)(struct device *self, int flags)

#define USB_DETACH_START(dname, sc) \
	struct __CONCAT(dname,_softc) *sc = \
		(struct __CONCAT(dname,_softc) *)self

#define USB_GET_SC_OPEN(dname, unit, sc) \
	if (unit >= __CONCAT(dname,_cd).cd_ndevs) \
		return (ENXIO); \
	sc = __CONCAT(dname,_cd).cd_devs[unit]; \
	if (sc == NULL) \
		return (ENXIO)

#define USB_GET_SC(dname, unit, sc) \
	sc = __CONCAT(dname,_cd).cd_devs[unit]

#define USB_DO_ATTACH(dev, bdev, parent, args, print, sub) \
	(config_found_sm(parent, args, print, sub))

#elif defined(__OpenBSD__)
/*
 * OpenBSD
 */
#define Static

typedef struct proc *usb_proc_ptr;

#define UCOMBUSCF_PORTNO		-1
#define UCOMBUSCF_PORTNO_DEFAULT	-1

#define SCSI_MODE_SENSE		MODE_SENSE
#define XS_STS_DONE		ITSDONE
#define XS_CTL_POLL		SCSI_POLL
#define XS_CTL_DATA_IN		SCSI_DATA_IN
#define XS_CTL_DATA_OUT		SCSI_DATA_OUT
#define scsipi_adapter		scsi_adapter
#define scsipi_cmd		scsi_cmd
#define scsipi_device		scsi_device
#define scsipi_done		scsi_done
#define scsipi_link		scsi_link
#define scsipi_minphys		scsi_minphys
#define scsipi_sense		scsi_sense
#define scsipi_xfer		scsi_xfer
#define xs_control		flags
#define xs_status		status

#define	memcpy(d, s, l)		bcopy((s),(d),(l))
#define	memset(d, v, l)		bzero((d),(l))
#define bswap32(x)		swap32(x)
#define bswap16(x)		swap16(x)

/*
 * The UHCI/OHCI controllers are little endian, so on big endian machines
 * the data strored in memory needs to be swapped.
 */

#if defined(letoh32)
#define le32toh(x) letoh32(x)
#define le16toh(x) letoh16(x)
#endif

#define usb_kthread_create1	kthread_create
#define usb_kthread_create	kthread_create_deferred

#define	config_pending_incr()
#define	config_pending_decr()

typedef int usb_malloc_type;

#define Ether_ifattach ether_ifattach
#define if_deactivate(x)
#define IF_INPUT(ifp, m) do {						\
	struct ether_header *eh;					\
									\
	eh = mtod(m, struct ether_header *);				\
	m_adj(m, sizeof(struct ether_header));				\
	ether_input((ifp), (eh), (m));					\
} while (0)

#define	usbpoll			usbselect
#define	uhidpoll		uhidselect
#define	ugenpoll		ugenselect
#define	uriopoll		urioselect
#define uscannerpoll		uscannerselect

#define powerhook_establish(fn, sc) (fn)
#define powerhook_disestablish(hdl)
#define PWR_RESUME 0

#define logprintf printf

#define swap_bytes_change_sign16_le swap_bytes_change_sign16
#define change_sign16_swap_bytes_le change_sign16_swap_bytes
#define change_sign16_le change_sign16

#define realloc usb_realloc
void *usb_realloc(void *, u_int, int, int);

extern int cold;

typedef struct device *device_ptr_t;
#define USBBASEDEVICE struct device
#define USBDEV(bdev) (&(bdev))
#define USBDEVNAME(bdev) ((bdev).dv_xname)
#define USBDEVUNIT(bdev) ((bdev).dv_unit)
#define USBDEVPTRNAME(bdevptr) ((bdevptr)->dv_xname)
#define USBGETSOFTC(d) ((void *)(d))

#define DECLARE_USB_DMA_T \
	struct usb_dma_block; \
	typedef struct { \
		struct usb_dma_block *block; \
		u_int offs; \
	} usb_dma_t

typedef char usb_callout_t;
#define usb_callout_init(h)
#define usb_callout(h, t, f, d) timeout((f), (d), (t))
#define usb_uncallout(h, f, d) untimeout((f), (d))

#define USB_DECLARE_DRIVER(dname)  \
int __CONCAT(dname,_match)(struct device *, void *, void *); \
void __CONCAT(dname,_attach)(struct device *, struct device *, void *); \
int __CONCAT(dname,_detach)(struct device *, int); \
int __CONCAT(dname,_activate)(struct device *, enum devact); \
\
struct cfdriver __CONCAT(dname,_cd) = { \
	NULL, #dname, DV_DULL \
}; \
\
const struct cfattach __CONCAT(dname,_ca) = { \
	sizeof(struct __CONCAT(dname,_softc)), \
	__CONCAT(dname,_match), \
	__CONCAT(dname,_attach), \
	__CONCAT(dname,_detach), \
	__CONCAT(dname,_activate), \
}

#define USB_MATCH(dname) \
int \
__CONCAT(dname,_match)(parent, match, aux) \
	struct device *parent; \
	void *match; \
	void *aux;

#define USB_MATCH_START(dname, uaa) \
	struct usb_attach_arg *uaa = aux

#define USB_ATTACH(dname) \
void \
__CONCAT(dname,_attach)(parent, self, aux) \
	struct device *parent; \
	struct device *self; \
	void *aux;

#define USB_ATTACH_START(dname, sc, uaa) \
	struct __CONCAT(dname,_softc) *sc = \
		(struct __CONCAT(dname,_softc) *)self; \
	struct usb_attach_arg *uaa = aux

/* Returns from attach */
#define USB_ATTACH_ERROR_RETURN	return
#define USB_ATTACH_SUCCESS_RETURN	return

#define USB_ATTACH_SETUP printf("\n")

#define USB_DETACH(dname) \
int \
__CONCAT(dname,_detach)(self, flags) \
	struct device *self; \
	int flags;

#define USB_DETACH_START(dname, sc) \
	struct __CONCAT(dname,_softc) *sc = \
		(struct __CONCAT(dname,_softc) *)self

#define USB_GET_SC_OPEN(dname, unit, sc) \
	if (unit >= __CONCAT(dname,_cd).cd_ndevs) \
		return (ENXIO); \
	sc = __CONCAT(dname,_cd).cd_devs[unit]; \
	if (sc == NULL) \
		return (ENXIO)

#define USB_GET_SC(dname, unit, sc) \
	sc = __CONCAT(dname,_cd).cd_devs[unit]

#define USB_DO_ATTACH(dev, bdev, parent, args, print, sub) \
	(config_found_sm(parent, args, print, sub))

#elif defined(__DragonFly__)
/***************************************************************************
 *					DRAGONFLY
 */
#include "opt_usb.h"

#if defined(_KERNEL)
#include <sys/malloc.h>

MALLOC_DECLARE(M_USB);
MALLOC_DECLARE(M_USBDEV);
MALLOC_DECLARE(M_USBHC);

#endif

#define USBVERBOSE

/* We don't use the soft interrupt code in FreeBSD. */
/* #undef USB_USE_SOFTINTR */

#define Static static

#define device_ptr_t device_t
#define USBBASEDEVICE device_t
#define USBDEV(bdev) (bdev)
#define USBDEVNAME(bdev) device_get_nameunit(bdev)
#define USBDEVUNIT(bdev) device_get_unit(bdev)
#define USBDEVPTRNAME(bdev) device_get_nameunit(bdev)
#define USBDEVUNIT(bdev) device_get_unit(bdev)
#define USBGETSOFTC(bdev) (device_get_softc(bdev))

#define DECLARE_USB_DMA_T \
	struct usb_dma_block; \
	typedef struct { \
		struct usb_dma_block *block; \
		u_int offs; \
		u_int len; \
	} usb_dma_t

#define	PROC_LOCK(p)
#define	PROC_UNLOCK(p)
#define uio_procp uio_td

#define selwakeuppri(p, pri)	selwakeup(p)

typedef struct thread *usb_proc_ptr;

/* XXX Change this when FreeBSD has memset */
#define memcpy(d, s, l)         bcopy((s),(d),(l))
#define memset(d, v, l)         bzero((d),(l))
#define bswap32(x)              swap32(x)

#define	config_pending_incr()
#define	config_pending_decr()

#define usb_kthread_create(f, s)			\
		kthread_create(f, s, NULL, "dummy")
#define usb_kthread_create1(f, s, p, name, arg)		\
		kthread_create(f, s, p, name, arg)
#define usb_kthread_create2(f, s, p, name) 		\
		kthread_create(f, s, p, name)

typedef struct callout usb_callout_t;
#define usb_callout_init(h)     callout_init(&(h))
#define usb_callout(h, t, f, d) callout_reset(&(h), (t), (f), (d))
#define usb_uncallout(h, f, d)  callout_stop(&(h))

#define	ETHER_ALIGN		2

#define clalloc(p, s, x) (clist_alloc_cblocks((p), (s), (s)), 0)
#define clfree(p) clist_free_cblocks((p))

#define PWR_RESUME 0
#define PWR_SUSPEND 1

#define config_detach(dev, flag) device_delete_child(device_get_parent(dev), dev)

typedef struct malloc_type *usb_malloc_type;

#define USB_DECLARE_DRIVER_INIT(dname, init...) \
Static device_probe_t __CONCAT(dname,_match); \
Static device_attach_t __CONCAT(dname,_attach); \
Static device_detach_t __CONCAT(dname,_detach); \
\
Static devclass_t __CONCAT(dname,_devclass); \
\
Static device_method_t __CONCAT(dname,_methods)[] = { \
        DEVMETHOD(device_probe, __CONCAT(dname,_match)), \
        DEVMETHOD(device_attach, __CONCAT(dname,_attach)), \
        DEVMETHOD(device_detach, __CONCAT(dname,_detach)), \
	init, \
        {0,0} \
}; \
\
Static driver_t __CONCAT(dname,_driver) = { \
        #dname, \
        __CONCAT(dname,_methods), \
        sizeof(struct __CONCAT(dname,_softc)) \
}; \
MODULE_DEPEND(dname, usb, 1, 1, 1)


#define METHODS_NONE			{0,0}
#define USB_DECLARE_DRIVER(dname)	USB_DECLARE_DRIVER_INIT(dname, METHODS_NONE)

#define USB_MATCH(dname) \
Static int \
__CONCAT(dname,_match)(device_t self)

#define USB_MATCH_START(dname, uaa) \
        struct usb_attach_arg *uaa = device_get_ivars(self)

#define USB_MATCH_SETUP \
	sc->sc_dev = self

#define USB_ATTACH(dname) \
Static int \
__CONCAT(dname,_attach)(device_t self)

#define USB_ATTACH_START(dname, sc, uaa) \
        struct __CONCAT(dname,_softc) *sc = device_get_softc(self); \
        struct usb_attach_arg *uaa = device_get_ivars(self)

/* Returns from attach */
#define USB_ATTACH_ERROR_RETURN	return ENXIO
#define USB_ATTACH_SUCCESS_RETURN	return 0

#define USB_ATTACH_SETUP \
	sc->sc_dev = self; \
	device_set_desc_copy(self, devinfo)

#define USB_DETACH(dname) \
Static int \
__CONCAT(dname,_detach)(device_t self)

#define USB_DETACH_START(dname, sc) \
	struct __CONCAT(dname,_softc) *sc = device_get_softc(self)

#define USB_GET_SC_OPEN(dname, unit, sc) \
	sc = devclass_get_softc(__CONCAT(dname,_devclass), unit); \
	if (sc == NULL) \
		return (ENXIO)

#define USB_GET_SC(dname, unit, sc) \
	sc = devclass_get_softc(__CONCAT(dname,_devclass), unit)

#define USB_DO_ATTACH(dev, bdev, parent, args, print, sub) \
	(device_probe_and_attach((bdev)) == 0 ? (bdev) : 0)

/* conversion from one type of queue to the other */
#define SIMPLEQ_REMOVE_HEAD	STAILQ_REMOVE_HEAD
#define SIMPLEQ_INSERT_HEAD	STAILQ_INSERT_HEAD
#define SIMPLEQ_INSERT_TAIL	STAILQ_INSERT_TAIL
#define SIMPLEQ_NEXT		STAILQ_NEXT
#define SIMPLEQ_FIRST		STAILQ_FIRST
#define SIMPLEQ_HEAD		STAILQ_HEAD
#define SIMPLEQ_EMPTY		STAILQ_EMPTY
#define SIMPLEQ_FOREACH		STAILQ_FOREACH
#define SIMPLEQ_INIT		STAILQ_INIT
#define SIMPLEQ_HEAD_INITIALIZER	STAILQ_HEAD_INITIALIZER
#define SIMPLEQ_ENTRY		STAILQ_ENTRY

#include <sys/syslog.h>
/*
#define logprintf(args...)	log(LOG_DEBUG, args)
*/
#define logprintf		printf

#ifdef SYSCTL_DECL
SYSCTL_DECL(_hw_usb);
#endif

#elif defined(__FreeBSD__) || defined(__DragonFly__)
/***************************************************************************
 *					FREEBSD
 */

#include "opt_usb.h"

#if defined(_KERNEL)
#include <sys/malloc.h>

MALLOC_DECLARE(M_USB);
MALLOC_DECLARE(M_USBDEV);
MALLOC_DECLARE(M_USBHC);

#endif

#define USBVERBOSE

/* We don't use the soft interrupt code in FreeBSD. */
#if 0
#define USB_USE_SOFTINTR
#endif

#define Static static

#define device_ptr_t device_t
#define USBBASEDEVICE device_t
#define USBDEV(bdev) (bdev)
#define USBDEVNAME(bdev) device_get_nameunit(bdev)
#define USBDEVUNIT(bdev) device_get_unit(bdev)
#define USBDEVPTRNAME(bdev) device_get_nameunit(bdev)
#define USBDEVUNIT(bdev) device_get_unit(bdev)
#define USBGETSOFTC(bdev) (device_get_softc(bdev))

#define DECLARE_USB_DMA_T \
	struct usb_dma_block; \
	typedef struct { \
		struct usb_dma_block *block; \
		u_int offs; \
		u_int len; \
	} usb_dma_t

#if defined(__FreeBSD__) && __FreeBSD_version >= 500000
typedef struct thread *usb_proc_ptr;

#define uio_procp uio_td

#define usb_kthread_create1(f, s, p, a0, a1) \
		kthread_create((f), (s), (p), RFHIGHPID, 0, (a0), (a1))
#define usb_kthread_create2(f, s, p, a0) \
		kthread_create((f), (s), (p), RFHIGHPID, 0, (a0))
#define usb_kthread_create	kthread_create

#define	config_pending_incr()
#define	config_pending_decr()

typedef struct callout usb_callout_t;
#define usb_callout_init(h)     callout_init(&(h), 0)
#define usb_callout(h, t, f, d) callout_reset(&(h), (t), (f), (d))
#define usb_uncallout(h, f, d)  callout_stop(&(h))
#else
typedef struct proc *usb_proc_ptr;

#define	PROC_LOCK(p)
#define	PROC_UNLOCK(p)

#define usb_kthread_create1(f, s, p, a0, a1) \
		kthread_create((f), (s), (p), (a0), (a1))
#define usb_kthread_create2(f, s, p, a0) \
		kthread_create((f), (s), (p), (a0))
#define usb_kthread_create	kthread_create

#define	config_pending_incr()
#define	config_pending_decr()

typedef struct callout usb_callout_t;
#define usb_callout_init(h)     callout_init(&(h))
#define usb_callout(h, t, f, d) callout_reset(&(h), (t), (f), (d))
#define usb_uncallout(h, f, d)  callout_stop(&(h))

#define	BUS_DMA_COHERENT	0
#define	ETHER_ALIGN		2
#define	BPF_MTAP(ifp, m)	if ((ifp)->if_bpf) bpf_mtap((ifp), (m));
#endif

#define clalloc(p, s, x) (clist_alloc_cblocks((p), (s), (s)), 0)
#define clfree(p) clist_free_cblocks((p))

#define PWR_RESUME 0
#define PWR_SUSPEND 1

#define config_detach(dev, flag) device_delete_child(device_get_parent(dev), dev)

typedef struct malloc_type *usb_malloc_type;

#define USB_DECLARE_DRIVER_INIT(dname, init...) \
Static device_probe_t __CONCAT(dname,_match); \
Static device_attach_t __CONCAT(dname,_attach); \
Static device_detach_t __CONCAT(dname,_detach); \
\
Static devclass_t __CONCAT(dname,_devclass); \
\
Static device_method_t __CONCAT(dname,_methods)[] = { \
        DEVMETHOD(device_probe, __CONCAT(dname,_match)), \
        DEVMETHOD(device_attach, __CONCAT(dname,_attach)), \
        DEVMETHOD(device_detach, __CONCAT(dname,_detach)), \
	init, \
        {0,0} \
}; \
\
Static driver_t __CONCAT(dname,_driver) = { \
        #dname, \
        __CONCAT(dname,_methods), \
        sizeof(struct __CONCAT(dname,_softc)) \
}; \
MODULE_DEPEND(dname, usb, 1, 1, 1)


#define METHODS_NONE			{0,0}
#define USB_DECLARE_DRIVER(dname)	USB_DECLARE_DRIVER_INIT(dname, METHODS_NONE)

#define USB_MATCH(dname) \
Static int \
__CONCAT(dname,_match)(device_t self)

#define USB_MATCH_START(dname, uaa) \
        struct usb_attach_arg *uaa = device_get_ivars(self)

#define USB_MATCH_SETUP \
	sc->sc_dev = self

#define USB_ATTACH(dname) \
Static int \
__CONCAT(dname,_attach)(device_t self)

#define USB_ATTACH_START(dname, sc, uaa) \
        struct __CONCAT(dname,_softc) *sc = device_get_softc(self); \
        struct usb_attach_arg *uaa = device_get_ivars(self)

/* Returns from attach */
#define USB_ATTACH_ERROR_RETURN	return ENXIO
#define USB_ATTACH_SUCCESS_RETURN	return 0

#define USB_ATTACH_SETUP \
	sc->sc_dev = self; \
	device_set_desc_copy(self, devinfo)

#define USB_DETACH(dname) \
Static int \
__CONCAT(dname,_detach)(device_t self)

#define USB_DETACH_START(dname, sc) \
	struct __CONCAT(dname,_softc) *sc = device_get_softc(self)

#define USB_GET_SC_OPEN(dname, unit, sc) \
	sc = devclass_get_softc(__CONCAT(dname,_devclass), unit); \
	if (sc == NULL) \
		return (ENXIO)

#define USB_GET_SC(dname, unit, sc) \
	sc = devclass_get_softc(__CONCAT(dname,_devclass), unit)

#define USB_DO_ATTACH(dev, bdev, parent, args, print, sub) \
	(device_probe_and_attach((bdev)) == 0 ? (bdev) : 0)

/* conversion from one type of queue to the other */
#define SIMPLEQ_REMOVE_HEAD	STAILQ_REMOVE_HEAD
#define SIMPLEQ_INSERT_HEAD	STAILQ_INSERT_HEAD
#define SIMPLEQ_INSERT_TAIL	STAILQ_INSERT_TAIL
#define SIMPLEQ_NEXT		STAILQ_NEXT
#define SIMPLEQ_FIRST		STAILQ_FIRST
#define SIMPLEQ_HEAD		STAILQ_HEAD
#define SIMPLEQ_EMPTY		STAILQ_EMPTY
#define SIMPLEQ_FOREACH		STAILQ_FOREACH
#define SIMPLEQ_INIT		STAILQ_INIT
#define SIMPLEQ_HEAD_INITIALIZER	STAILQ_HEAD_INITIALIZER
#define SIMPLEQ_ENTRY		STAILQ_ENTRY

#include <sys/syslog.h>
/*
#define logprintf(args...)	log(LOG_DEBUG, args)
*/
#define logprintf		printf

#ifdef SYSCTL_DECL
SYSCTL_DECL(_hw_usb);
#endif

#endif /* __FreeBSD__ */

#endif /* _USB_PORT_H */