/* * Copyright (c) 1989, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)state.c 8.5 (Berkeley) 5/30/95 * $FreeBSD: src/crypto/telnet/telnetd/state.c,v 1.4.2.3 2002/04/13 10:59:08 markm Exp $ */ #include #include "telnetd.h" #ifdef AUTHENTICATION #include #endif #ifdef ENCRYPTION #include #endif static int envvarok(char *); unsigned char doopt[] = { IAC, DO, '%', 'c', 0 }; unsigned char dont[] = { IAC, DONT, '%', 'c', 0 }; unsigned char will[] = { IAC, WILL, '%', 'c', 0 }; unsigned char wont[] = { IAC, WONT, '%', 'c', 0 }; int not42 = 1; char *terminaltype; /* * Buffer for sub-options, and macros * for suboptions buffer manipulations */ unsigned char subbuffer[512], *subpointer= subbuffer, *subend= subbuffer; #define SB_CLEAR() subpointer = subbuffer #define SB_TERM() { subend = subpointer; SB_CLEAR(); } #define SB_ACCUM(c) if (subpointer < (subbuffer+sizeof subbuffer)) { \ *subpointer++ = (c); \ } #define SB_GET() ((*subpointer++)&0xff) #define SB_EOF() (subpointer >= subend) #define SB_LEN() (subend - subpointer) #ifdef ENV_HACK unsigned char *subsave; #define SB_SAVE() subsave = subpointer; #define SB_RESTORE() subpointer = subsave; #endif /* * State for recv fsm */ #define TS_DATA 0 /* base state */ #define TS_IAC 1 /* look for double IAC's */ #define TS_CR 2 /* CR-LF ->'s CR */ #define TS_SB 3 /* throw away begin's... */ #define TS_SE 4 /* ...end's (suboption negotiation) */ #define TS_WILL 5 /* will option negotiation */ #define TS_WONT 6 /* wont " */ #define TS_DO 7 /* do " */ #define TS_DONT 8 /* dont " */ static void doclientstat(void); void telrcv(void) { int c; static int state = TS_DATA; while (ncc > 0) { if ((&ptyobuf[BUFSIZ] - pfrontp) < 2) break; c = *netip++ & 0377, ncc--; #ifdef ENCRYPTION if (decrypt_input) c = (*decrypt_input)(c); #endif /* ENCRYPTION */ switch (state) { case TS_CR: state = TS_DATA; /* Strip off \n or \0 after a \r */ if ((c == 0) || (c == '\n')) { break; } /* FALL THROUGH */ case TS_DATA: if (c == IAC) { state = TS_IAC; break; } /* * We now map \r\n ==> \r for pragmatic reasons. * Many client implementations send \r\n when * the user hits the CarriageReturn key. * * We USED to map \r\n ==> \n, since \r\n says * that we want to be in column 1 of the next * printable line, and \n is the standard * unix way of saying that (\r is only good * if CRMOD is set, which it normally is). */ if ((c == '\r') && his_state_is_wont(TELOPT_BINARY)) { int nc = *netip; #ifdef ENCRYPTION if (decrypt_input) nc = (*decrypt_input)(nc & 0xff); #endif /* ENCRYPTION */ #ifdef LINEMODE /* * If we are operating in linemode, * convert to local end-of-line. */ if (linemode && (ncc > 0) && (('\n' == nc) || ((0 == nc) && tty_iscrnl())) ) { netip++; ncc--; c = '\n'; } else #endif { #ifdef ENCRYPTION if (decrypt_input) (void)(*decrypt_input)(-1); #endif /* ENCRYPTION */ state = TS_CR; } } *pfrontp++ = c; break; case TS_IAC: gotiac: switch (c) { /* * Send the process on the pty side an * interrupt. Do this with a NULL or * interrupt char; depending on the tty mode. */ case IP: DIAG(TD_OPTIONS, printoption("td: recv IAC", c)); interrupt(); break; case BREAK: DIAG(TD_OPTIONS, printoption("td: recv IAC", c)); sendbrk(); break; /* * Are You There? */ case AYT: DIAG(TD_OPTIONS, printoption("td: recv IAC", c)); recv_ayt(); break; /* * Abort Output */ case AO: { DIAG(TD_OPTIONS, printoption("td: recv IAC", c)); ptyflush(); /* half-hearted */ init_termbuf(); if (slctab[SLC_AO].sptr && *slctab[SLC_AO].sptr != (cc_t)(_POSIX_VDISABLE)) { *pfrontp++ = (unsigned char)*slctab[SLC_AO].sptr; } netclear(); /* clear buffer back */ output_data("%c%c", IAC, DM); neturg = nfrontp-1; /* off by one XXX */ DIAG(TD_OPTIONS, printoption("td: send IAC", DM)); break; } /* * Erase Character and * Erase Line */ case EC: case EL: { cc_t ch; DIAG(TD_OPTIONS, printoption("td: recv IAC", c)); ptyflush(); /* half-hearted */ init_termbuf(); if (c == EC) ch = *slctab[SLC_EC].sptr; else ch = *slctab[SLC_EL].sptr; if (ch != (cc_t)(_POSIX_VDISABLE)) *pfrontp++ = (unsigned char)ch; break; } /* * Check for urgent data... */ case DM: DIAG(TD_OPTIONS, printoption("td: recv IAC", c)); SYNCHing = stilloob(net); settimer(gotDM); break; /* * Begin option subnegotiation... */ case SB: state = TS_SB; SB_CLEAR(); continue; case WILL: state = TS_WILL; continue; case WONT: state = TS_WONT; continue; case DO: state = TS_DO; continue; case DONT: state = TS_DONT; continue; case EOR: if (his_state_is_will(TELOPT_EOR)) doeof(); break; /* * Handle RFC 10xx Telnet linemode option additions * to command stream (EOF, SUSP, ABORT). */ case xEOF: doeof(); break; case SUSP: sendsusp(); break; case ABORT: sendbrk(); break; case IAC: *pfrontp++ = c; break; } state = TS_DATA; break; case TS_SB: if (c == IAC) { state = TS_SE; } else { SB_ACCUM(c); } break; case TS_SE: if (c != SE) { if (c != IAC) { /* * bad form of suboption negotiation. * handle it in such a way as to avoid * damage to local state. Parse * suboption buffer found so far, * then treat remaining stream as * another command sequence. */ /* for DIAGNOSTICS */ SB_ACCUM(IAC); SB_ACCUM(c); subpointer -= 2; SB_TERM(); suboption(); state = TS_IAC; goto gotiac; } SB_ACCUM(c); state = TS_SB; } else { /* for DIAGNOSTICS */ SB_ACCUM(IAC); SB_ACCUM(SE); subpointer -= 2; SB_TERM(); suboption(); /* handle sub-option */ state = TS_DATA; } break; case TS_WILL: willoption(c); state = TS_DATA; continue; case TS_WONT: wontoption(c); state = TS_DATA; continue; case TS_DO: dooption(c); state = TS_DATA; continue; case TS_DONT: dontoption(c); state = TS_DATA; continue; default: syslog(LOG_ERR, "panic state=%d", state); printf("telnetd: panic state=%d\n", state); exit(1); } } } /* end of telrcv */ /* * The will/wont/do/dont state machines are based on Dave Borman's * Telnet option processing state machine. * * These correspond to the following states: * my_state = the last negotiated state * want_state = what I want the state to go to * want_resp = how many requests I have sent * All state defaults are negative, and resp defaults to 0. * * When initiating a request to change state to new_state: * * if ((want_resp == 0 && new_state == my_state) || want_state == new_state) { * do nothing; * } else { * want_state = new_state; * send new_state; * want_resp++; * } * * When receiving new_state: * * if (want_resp) { * want_resp--; * if (want_resp && (new_state == my_state)) * want_resp--; * } * if ((want_resp == 0) && (new_state != want_state)) { * if (ok_to_switch_to new_state) * want_state = new_state; * else * want_resp++; * send want_state; * } * my_state = new_state; * * Note that new_state is implied in these functions by the function itself. * will and do imply positive new_state, wont and dont imply negative. * * Finally, there is one catch. If we send a negative response to a * positive request, my_state will be the positive while want_state will * remain negative. my_state will revert to negative when the negative * acknowlegment arrives from the peer. Thus, my_state generally tells * us not only the last negotiated state, but also tells us what the peer * wants to be doing as well. It is important to understand this difference * as we may wish to be processing data streams based on our desired state * (want_state) or based on what the peer thinks the state is (my_state). * * This all works fine because if the peer sends a positive request, the data * that we receive prior to negative acknowlegment will probably be affected * by the positive state, and we can process it as such (if we can; if we * can't then it really doesn't matter). If it is that important, then the * peer probably should be buffering until this option state negotiation * is complete. * */ void send_do(int option, int init) { if (init) { if ((do_dont_resp[option] == 0 && his_state_is_will(option)) || his_want_state_is_will(option)) return; /* * Special case for TELOPT_TM: We send a DO, but pretend * that we sent a DONT, so that we can send more DOs if * we want to. */ if (option == TELOPT_TM) set_his_want_state_wont(option); else set_his_want_state_will(option); do_dont_resp[option]++; } output_data((const char *)doopt, option); DIAG(TD_OPTIONS, printoption("td: send do", option)); } void willoption(int option) { int changeok = 0; void (*func)(void) = NULL; /* * process input from peer. */ DIAG(TD_OPTIONS, printoption("td: recv will", option)); if (do_dont_resp[option]) { do_dont_resp[option]--; if (do_dont_resp[option] && his_state_is_will(option)) do_dont_resp[option]--; } if (do_dont_resp[option] == 0) { if (his_want_state_is_wont(option)) { switch (option) { case TELOPT_BINARY: init_termbuf(); tty_binaryin(1); set_termbuf(); changeok++; break; case TELOPT_ECHO: /* * See comments below for more info. */ not42 = 0; /* looks like a 4.2 system */ break; case TELOPT_TM: #if defined(LINEMODE) && defined(KLUDGELINEMODE) /* * This telnetd implementation does not really * support timing marks, it just uses them to * support the kludge linemode stuff. If we * receive a will or wont TM in response to our * do TM request that may have been sent to * determine kludge linemode support, process * it, otherwise TM should get a negative * response back. */ /* * Handle the linemode kludge stuff. * If we are not currently supporting any * linemode at all, then we assume that this * is the client telling us to use kludge * linemode in response to our query. Set the * linemode type that is to be supported, note * that the client wishes to use linemode, and * eat the will TM as though it never arrived. */ if (lmodetype < KLUDGE_LINEMODE) { lmodetype = KLUDGE_LINEMODE; clientstat(TELOPT_LINEMODE, WILL, 0); send_wont(TELOPT_SGA, 1); } else if (lmodetype == NO_AUTOKLUDGE) { lmodetype = KLUDGE_OK; } #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ /* * We never respond to a WILL TM, and * we leave the state WONT. */ return; case TELOPT_LFLOW: /* * If we are going to support flow control * option, then don't worry peer that we can't * change the flow control characters. */ slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS; slctab[SLC_XON].defset.flag |= SLC_DEFAULT; slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS; slctab[SLC_XOFF].defset.flag |= SLC_DEFAULT; /* FALLTHROUGH */ case TELOPT_TTYPE: case TELOPT_SGA: case TELOPT_NAWS: case TELOPT_TSPEED: case TELOPT_XDISPLOC: case TELOPT_NEW_ENVIRON: case TELOPT_OLD_ENVIRON: changeok++; break; #ifdef LINEMODE case TELOPT_LINEMODE: # ifdef KLUDGELINEMODE /* * Note client's desire to use linemode. */ lmodetype = REAL_LINEMODE; # endif /* KLUDGELINEMODE */ func = doclientstat; changeok++; break; #endif /* LINEMODE */ #ifdef AUTHENTICATION case TELOPT_AUTHENTICATION: func = auth_request; changeok++; break; #endif #ifdef ENCRYPTION case TELOPT_ENCRYPT: func = encrypt_send_support; changeok++; break; #endif /* ENCRYPTION */ default: break; } if (changeok) { set_his_want_state_will(option); send_do(option, 0); } else { do_dont_resp[option]++; send_dont(option, 0); } } else { /* * Option processing that should happen when * we receive conformation of a change in * state that we had requested. */ switch (option) { case TELOPT_ECHO: not42 = 0; /* looks like a 4.2 system */ /* * Egads, he responded "WILL ECHO". Turn * it off right now! */ send_dont(option, 1); /* * "WILL ECHO". Kludge upon kludge! * A 4.2 client is now echoing user input at * the tty. This is probably undesireable and * it should be stopped. The client will * respond WONT TM to the DO TM that we send to * check for kludge linemode. When the WONT TM * arrives, linemode will be turned off and a * change propogated to the pty. This change * will cause us to process the new pty state * in localstat(), which will notice that * linemode is off and send a WILL ECHO * so that we are properly in character mode and * all is well. */ break; #ifdef LINEMODE case TELOPT_LINEMODE: # ifdef KLUDGELINEMODE /* * Note client's desire to use linemode. */ lmodetype = REAL_LINEMODE; # endif /* KLUDGELINEMODE */ func = doclientstat; break; #endif /* LINEMODE */ #ifdef AUTHENTICATION case TELOPT_AUTHENTICATION: func = auth_request; break; #endif #ifdef ENCRYPTION case TELOPT_ENCRYPT: func = encrypt_send_support; break; #endif /* ENCRYPTION */ case TELOPT_LFLOW: func = flowstat; break; } } } set_his_state_will(option); if (func) (*func)(); } /* end of willoption */ void send_dont(int option, int init) { if (init) { if ((do_dont_resp[option] == 0 && his_state_is_wont(option)) || his_want_state_is_wont(option)) return; set_his_want_state_wont(option); do_dont_resp[option]++; } output_data((const char *)dont, option); DIAG(TD_OPTIONS, printoption("td: send dont", option)); } void wontoption(int option) { /* * Process client input. */ DIAG(TD_OPTIONS, printoption("td: recv wont", option)); if (do_dont_resp[option]) { do_dont_resp[option]--; if (do_dont_resp[option] && his_state_is_wont(option)) do_dont_resp[option]--; } if (do_dont_resp[option] == 0) { if (his_want_state_is_will(option)) { /* it is always ok to change to negative state */ switch (option) { case TELOPT_ECHO: not42 = 1; /* doesn't seem to be a 4.2 system */ break; case TELOPT_BINARY: init_termbuf(); tty_binaryin(0); set_termbuf(); break; #ifdef LINEMODE case TELOPT_LINEMODE: # ifdef KLUDGELINEMODE /* * If real linemode is supported, then client is * asking to turn linemode off. */ if (lmodetype != REAL_LINEMODE) break; lmodetype = KLUDGE_LINEMODE; # endif /* KLUDGELINEMODE */ clientstat(TELOPT_LINEMODE, WONT, 0); break; #endif /* LINEMODE */ case TELOPT_TM: /* * If we get a WONT TM, and had sent a DO TM, * don't respond with a DONT TM, just leave it * as is. Short circut the state machine to * achive this. */ set_his_want_state_wont(TELOPT_TM); return; case TELOPT_LFLOW: /* * If we are not going to support flow control * option, then let peer know that we can't * change the flow control characters. */ slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS; slctab[SLC_XON].defset.flag |= SLC_CANTCHANGE; slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS; slctab[SLC_XOFF].defset.flag |= SLC_CANTCHANGE; break; #ifdef AUTHENTICATION case TELOPT_AUTHENTICATION: auth_finished(0, AUTH_REJECT); break; #endif /* * For options that we might spin waiting for * sub-negotiation, if the client turns off the * option rather than responding to the request, * we have to treat it here as if we got a response * to the sub-negotiation, (by updating the timers) * so that we'll break out of the loop. */ case TELOPT_TTYPE: settimer(ttypesubopt); break; case TELOPT_TSPEED: settimer(tspeedsubopt); break; case TELOPT_XDISPLOC: settimer(xdisplocsubopt); break; case TELOPT_OLD_ENVIRON: settimer(oenvironsubopt); break; case TELOPT_NEW_ENVIRON: settimer(environsubopt); break; default: break; } set_his_want_state_wont(option); if (his_state_is_will(option)) send_dont(option, 0); } else { switch (option) { case TELOPT_TM: #if defined(LINEMODE) && defined(KLUDGELINEMODE) if (lmodetype < NO_AUTOKLUDGE) { lmodetype = NO_LINEMODE; clientstat(TELOPT_LINEMODE, WONT, 0); send_will(TELOPT_SGA, 1); send_will(TELOPT_ECHO, 1); } #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ break; #ifdef AUTHENTICATION case TELOPT_AUTHENTICATION: auth_finished(0, AUTH_REJECT); break; #endif default: break; } } } set_his_state_wont(option); } /* end of wontoption */ void send_will(int option, int init) { if (init) { if ((will_wont_resp[option] == 0 && my_state_is_will(option))|| my_want_state_is_will(option)) return; set_my_want_state_will(option); will_wont_resp[option]++; } output_data((const char *)will, option); DIAG(TD_OPTIONS, printoption("td: send will", option)); } #if !defined(LINEMODE) || !defined(KLUDGELINEMODE) /* * When we get a DONT SGA, we will try once to turn it * back on. If the other side responds DONT SGA, we * leave it at that. This is so that when we talk to * clients that understand KLUDGELINEMODE but not LINEMODE, * we'll keep them in char-at-a-time mode. */ int turn_on_sga = 0; #endif void dooption(int option) { int changeok = 0; /* * Process client input. */ DIAG(TD_OPTIONS, printoption("td: recv do", option)); if (will_wont_resp[option]) { will_wont_resp[option]--; if (will_wont_resp[option] && my_state_is_will(option)) will_wont_resp[option]--; } if ((will_wont_resp[option] == 0) && (my_want_state_is_wont(option))) { switch (option) { case TELOPT_ECHO: #ifdef LINEMODE # ifdef KLUDGELINEMODE if (lmodetype == NO_LINEMODE) # else if (his_state_is_wont(TELOPT_LINEMODE)) # endif #endif { init_termbuf(); tty_setecho(1); set_termbuf(); } changeok++; break; case TELOPT_BINARY: init_termbuf(); tty_binaryout(1); set_termbuf(); changeok++; break; case TELOPT_SGA: #if defined(LINEMODE) && defined(KLUDGELINEMODE) /* * If kludge linemode is in use, then we must * process an incoming do SGA for linemode * purposes. */ if (lmodetype == KLUDGE_LINEMODE) { /* * Receipt of "do SGA" in kludge * linemode is the peer asking us to * turn off linemode. Make note of * the request. */ clientstat(TELOPT_LINEMODE, WONT, 0); /* * If linemode did not get turned off * then don't tell peer that we did. * Breaking here forces a wont SGA to * be returned. */ if (linemode) break; } #else turn_on_sga = 0; #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ changeok++; break; case TELOPT_STATUS: changeok++; break; case TELOPT_TM: /* * Special case for TM. We send a WILL, but * pretend we sent a WONT. */ send_will(option, 0); set_my_want_state_wont(option); set_my_state_wont(option); return; case TELOPT_LOGOUT: /* * When we get a LOGOUT option, respond * with a WILL LOGOUT, make sure that * it gets written out to the network, * and then just go away... */ set_my_want_state_will(TELOPT_LOGOUT); send_will(TELOPT_LOGOUT, 0); set_my_state_will(TELOPT_LOGOUT); (void)netflush(); cleanup(0); /* NOT REACHED */ break; #ifdef ENCRYPTION case TELOPT_ENCRYPT: changeok++; break; #endif /* ENCRYPTION */ case TELOPT_LINEMODE: case TELOPT_TTYPE: case TELOPT_NAWS: case TELOPT_TSPEED: case TELOPT_LFLOW: case TELOPT_XDISPLOC: #ifdef TELOPT_ENVIRON case TELOPT_NEW_ENVIRON: #endif case TELOPT_OLD_ENVIRON: default: break; } if (changeok) { set_my_want_state_will(option); send_will(option, 0); } else { will_wont_resp[option]++; send_wont(option, 0); } } set_my_state_will(option); } /* end of dooption */ void send_wont(int option, int init) { if (init) { if ((will_wont_resp[option] == 0 && my_state_is_wont(option)) || my_want_state_is_wont(option)) return; set_my_want_state_wont(option); will_wont_resp[option]++; } output_data((const char *)wont, option); DIAG(TD_OPTIONS, printoption("td: send wont", option)); } void dontoption(int option) { /* * Process client input. */ DIAG(TD_OPTIONS, printoption("td: recv dont", option)); if (will_wont_resp[option]) { will_wont_resp[option]--; if (will_wont_resp[option] && my_state_is_wont(option)) will_wont_resp[option]--; } if ((will_wont_resp[option] == 0) && (my_want_state_is_will(option))) { switch (option) { case TELOPT_BINARY: init_termbuf(); tty_binaryout(0); set_termbuf(); break; case TELOPT_ECHO: /* we should stop echoing */ #ifdef LINEMODE # ifdef KLUDGELINEMODE if ((lmodetype != REAL_LINEMODE) && (lmodetype != KLUDGE_LINEMODE)) # else if (his_state_is_wont(TELOPT_LINEMODE)) # endif #endif { init_termbuf(); tty_setecho(0); set_termbuf(); } break; case TELOPT_SGA: #if defined(LINEMODE) && defined(KLUDGELINEMODE) /* * If kludge linemode is in use, then we * must process an incoming do SGA for * linemode purposes. */ if ((lmodetype == KLUDGE_LINEMODE) || (lmodetype == KLUDGE_OK)) { /* * The client is asking us to turn * linemode on. */ lmodetype = KLUDGE_LINEMODE; clientstat(TELOPT_LINEMODE, WILL, 0); /* * If we did not turn line mode on, * then what do we say? Will SGA? * This violates design of telnet. * Gross. Very Gross. */ } break; #else set_my_want_state_wont(option); if (my_state_is_will(option)) send_wont(option, 0); set_my_state_wont(option); if (turn_on_sga ^= 1) send_will(option, 1); return; #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ default: break; } set_my_want_state_wont(option); if (my_state_is_will(option)) send_wont(option, 0); } set_my_state_wont(option); } /* end of dontoption */ #ifdef ENV_HACK int env_ovar = -1; int env_ovalue = -1; #else /* ENV_HACK */ # define env_ovar OLD_ENV_VAR # define env_ovalue OLD_ENV_VALUE #endif /* ENV_HACK */ /* envvarok(char*) */ /* check that variable is safe to pass to login or shell */ static int envvarok(char *varp) { if (strcmp(varp, "TERMCAP") && /* to prevent a security hole */ strcmp(varp, "TERMINFO") && /* with tgetent */ strcmp(varp, "TERMPATH") && strcmp(varp, "HOME") && /* to prevent the tegetent bug */ strncmp(varp, "LD_", strlen("LD_")) && /* most systems */ strncmp(varp, "_RLD_", strlen("_RLD_")) && /* IRIX */ strcmp(varp, "LIBPATH") && /* AIX */ strcmp(varp, "ENV") && strcmp(varp, "BASH_ENV") && strcmp(varp, "IFS") && strncmp(varp, "KRB5", strlen("KRB5")) && /* Krb5 */ /* * The above case is a catch-all for now. Here are some of * the specific ones we must avoid passing, at least until * we can prove it can be done safely. Keep this list * around un case someone wants to remove the catch-all. */ strcmp(varp, "KRB5_CONFIG") && /* Krb5 */ strcmp(varp, "KRB5CCNAME") && /* Krb5 */ strcmp(varp, "KRB5_KTNAME") && /* Krb5 */ strcmp(varp, "KRBTKFILE") && /* Krb4 */ strcmp(varp, "KRB_CONF") && /* CNS 4 */ strcmp(varp, "KRB_REALMS") && /* CNS 4 */ strcmp(varp, "RESOLV_HOST_CONF")) /* Linux */ return (1); else { syslog(LOG_INFO, "Rejected the attempt to modify the " "environment variable \"%s\"", varp); return (0); } } /* * suboption() * * Look at the sub-option buffer, and try to be helpful to the other * side. * * Currently we recognize: * * Terminal type is * Linemode * Window size * Terminal speed */ void suboption(void) { int subchar; DIAG(TD_OPTIONS, {netflush(); printsub('<', subpointer, SB_LEN()+2);}); subchar = SB_GET(); switch (subchar) { case TELOPT_TSPEED: { int xspeed, rspeed; if (his_state_is_wont(TELOPT_TSPEED)) /* Ignore if option disabled */ break; settimer(tspeedsubopt); if (SB_EOF() || SB_GET() != TELQUAL_IS) return; xspeed = atoi((char *)subpointer); while (SB_GET() != ',' && !SB_EOF()); if (SB_EOF()) return; rspeed = atoi((char *)subpointer); clientstat(TELOPT_TSPEED, xspeed, rspeed); break; } /* end of case TELOPT_TSPEED */ case TELOPT_TTYPE: { /* Yaaaay! */ static char terminalname[TERMINAL_TYPE_SIZE]; if (his_state_is_wont(TELOPT_TTYPE)) /* Ignore if option disabled */ break; settimer(ttypesubopt); if (SB_EOF() || SB_GET() != TELQUAL_IS) { return; /* ??? XXX but, this is the most robust */ } terminaltype = terminalname; while ((terminaltype < (terminalname + sizeof terminalname-1)) && !SB_EOF()) { int c; c = SB_GET(); if (isupper(c)) { c = tolower(c); } *terminaltype++ = c; /* accumulate name */ } *terminaltype = 0; terminaltype = terminalname; break; } /* end of case TELOPT_TTYPE */ case TELOPT_NAWS: { int xwinsize, ywinsize; if (his_state_is_wont(TELOPT_NAWS)) /* Ignore if option disabled */ break; if (SB_EOF()) return; xwinsize = SB_GET() << 8; if (SB_EOF()) return; xwinsize |= SB_GET(); if (SB_EOF()) return; ywinsize = SB_GET() << 8; if (SB_EOF()) return; ywinsize |= SB_GET(); clientstat(TELOPT_NAWS, xwinsize, ywinsize); break; } /* end of case TELOPT_NAWS */ #ifdef LINEMODE case TELOPT_LINEMODE: { int request; if (his_state_is_wont(TELOPT_LINEMODE)) /* Ignore if option disabled */ break; /* * Process linemode suboptions. */ if (SB_EOF()) break; /* garbage was sent */ request = SB_GET(); /* get will/wont */ if (SB_EOF()) break; /* another garbage check */ if (request == LM_SLC) { /* SLC is not preceeded by WILL or WONT */ /* * Process suboption buffer of slc's */ start_slc(1); do_opt_slc(subpointer, subend - subpointer); (void) end_slc(0); break; } else if (request == LM_MODE) { if (SB_EOF()) return; useeditmode = SB_GET(); /* get mode flag */ clientstat(LM_MODE, 0, 0); break; } if (SB_EOF()) break; switch (SB_GET()) { /* what suboption? */ case LM_FORWARDMASK: /* * According to spec, only server can send request for * forwardmask, and client can only return a positive response. * So don't worry about it. */ default: break; } break; } /* end of case TELOPT_LINEMODE */ #endif case TELOPT_STATUS: { int mode; if (SB_EOF()) break; mode = SB_GET(); switch (mode) { case TELQUAL_SEND: if (my_state_is_will(TELOPT_STATUS)) send_status(); break; case TELQUAL_IS: break; default: break; } break; } /* end of case TELOPT_STATUS */ case TELOPT_XDISPLOC: { if (SB_EOF() || SB_GET() != TELQUAL_IS) return; settimer(xdisplocsubopt); subpointer[SB_LEN()] = '\0'; if (setenv("DISPLAY", (char *)subpointer, 1) == -1) syslog(LOG_ERR, "setenv: cannot set DISPLAY=%s: %m", (char *)subpointer); break; } /* end of case TELOPT_XDISPLOC */ #ifdef TELOPT_NEW_ENVIRON case TELOPT_NEW_ENVIRON: #endif case TELOPT_OLD_ENVIRON: { int c; char *cp, *varp, *valp; if (SB_EOF()) return; c = SB_GET(); if (c == TELQUAL_IS) { if (subchar == TELOPT_OLD_ENVIRON) settimer(oenvironsubopt); else settimer(environsubopt); } else if (c != TELQUAL_INFO) { return; } #ifdef TELOPT_NEW_ENVIRON if (subchar == TELOPT_NEW_ENVIRON) { while (!SB_EOF()) { c = SB_GET(); if ((c == NEW_ENV_VAR) || (c == ENV_USERVAR)) break; } } else #endif { #ifdef ENV_HACK /* * We only want to do this if we haven't already decided * whether or not the other side has its VALUE and VAR * reversed. */ if (env_ovar < 0) { int last = -1; /* invalid value */ int empty = 0; int got_var = 0, got_value = 0, got_uservar = 0; /* * The other side might have its VALUE and VAR values * reversed. To be interoperable, we need to determine * which way it is. If the first recognized character * is a VAR or VALUE, then that will tell us what * type of client it is. If the fist recognized * character is a USERVAR, then we continue scanning * the suboption looking for two consecutive * VAR or VALUE fields. We should not get two * consecutive VALUE fields, so finding two * consecutive VALUE or VAR fields will tell us * what the client is. */ SB_SAVE(); while (!SB_EOF()) { c = SB_GET(); switch(c) { case OLD_ENV_VAR: if (last < 0 || last == OLD_ENV_VAR || (empty && (last == OLD_ENV_VALUE))) goto env_ovar_ok; got_var++; last = OLD_ENV_VAR; break; case OLD_ENV_VALUE: if (last < 0 || last == OLD_ENV_VALUE || (empty && (last == OLD_ENV_VAR))) goto env_ovar_wrong; got_value++; last = OLD_ENV_VALUE; break; case ENV_USERVAR: /* count strings of USERVAR as one */ if (last != ENV_USERVAR) got_uservar++; if (empty) { if (last == OLD_ENV_VALUE) goto env_ovar_ok; if (last == OLD_ENV_VAR) goto env_ovar_wrong; } last = ENV_USERVAR; break; case ENV_ESC: if (!SB_EOF()) c = SB_GET(); /* FALL THROUGH */ default: empty = 0; continue; } empty = 1; } if (empty) { if (last == OLD_ENV_VALUE) goto env_ovar_ok; if (last == OLD_ENV_VAR) goto env_ovar_wrong; } /* * Ok, the first thing was a USERVAR, and there * are not two consecutive VAR or VALUE commands, * and none of the VAR or VALUE commands are empty. * If the client has sent us a well-formed option, * then the number of VALUEs received should always * be less than or equal to the number of VARs and * USERVARs received. * * If we got exactly as many VALUEs as VARs and * USERVARs, the client has the same definitions. * * If we got exactly as many VARs as VALUEs and * USERVARS, the client has reversed definitions. */ if (got_uservar + got_var == got_value) { env_ovar_ok: env_ovar = OLD_ENV_VAR; env_ovalue = OLD_ENV_VALUE; } else if (got_uservar + got_value == got_var) { env_ovar_wrong: env_ovar = OLD_ENV_VALUE; env_ovalue = OLD_ENV_VAR; DIAG(TD_OPTIONS, output_data("ENVIRON VALUE and VAR are reversed!\r\n")); } } SB_RESTORE(); #endif while (!SB_EOF()) { c = SB_GET(); if ((c == env_ovar) || (c == ENV_USERVAR)) break; } } if (SB_EOF()) return; cp = varp = (char *)subpointer; valp = NULL; while (!SB_EOF()) { c = SB_GET(); if (subchar == TELOPT_OLD_ENVIRON) { if (c == env_ovar) c = NEW_ENV_VAR; else if (c == env_ovalue) c = NEW_ENV_VALUE; } switch (c) { case NEW_ENV_VALUE: *cp = '\0'; cp = valp = (char *)subpointer; break; case NEW_ENV_VAR: case ENV_USERVAR: *cp = '\0'; if (envvarok(varp)) { if (valp) { if (setenv(varp, valp, 1) == -1) syslog(LOG_ERR, "setenv: cannot set %s=%s: %m", varp, valp); } else unsetenv(varp); } cp = varp = (char *)subpointer; valp = NULL; break; case ENV_ESC: if (SB_EOF()) break; c = SB_GET(); /* FALL THROUGH */ default: *cp++ = c; break; } } *cp = '\0'; if (envvarok(varp)) { if (valp) { if (setenv(varp, valp, 1) == -1) syslog(LOG_ERR, "setenv: cannot set %s=%s: %m", varp, valp); } else unsetenv(varp); } break; } /* end of case TELOPT_NEW_ENVIRON */ #ifdef AUTHENTICATION case TELOPT_AUTHENTICATION: if (SB_EOF()) break; switch(SB_GET()) { case TELQUAL_SEND: case TELQUAL_REPLY: /* * These are sent by us and cannot be sent by * the client. */ break; case TELQUAL_IS: auth_is(subpointer, SB_LEN()); break; case TELQUAL_NAME: auth_name(subpointer, SB_LEN()); break; } break; #endif #ifdef ENCRYPTION case TELOPT_ENCRYPT: if (SB_EOF()) break; switch(SB_GET()) { case ENCRYPT_SUPPORT: encrypt_support(subpointer, SB_LEN()); break; case ENCRYPT_IS: encrypt_is(subpointer, SB_LEN()); break; case ENCRYPT_REPLY: encrypt_reply(subpointer, SB_LEN()); break; case ENCRYPT_START: encrypt_start(subpointer, SB_LEN()); break; case ENCRYPT_END: encrypt_end(); break; case ENCRYPT_REQSTART: encrypt_request_start(subpointer, SB_LEN()); break; case ENCRYPT_REQEND: /* * We can always send an REQEND so that we cannot * get stuck encrypting. We should only get this * if we have been able to get in the correct mode * anyhow. */ encrypt_request_end(); break; case ENCRYPT_ENC_KEYID: encrypt_enc_keyid(subpointer, SB_LEN()); break; case ENCRYPT_DEC_KEYID: encrypt_dec_keyid(subpointer, SB_LEN()); break; default: break; } break; #endif /* ENCRYPTION */ default: break; } /* end of switch */ } /* end of suboption */ static void doclientstat(void) { clientstat(TELOPT_LINEMODE, WILL, 0); } #define ADD(c) *ncp++ = c #define ADD_DATA(c) { *ncp++ = c; if (c == SE || c == IAC) *ncp++ = c; } void send_status(void) { unsigned char statusbuf[256]; unsigned char *ncp; unsigned char i; ncp = statusbuf; netflush(); /* get rid of anything waiting to go out */ ADD(IAC); ADD(SB); ADD(TELOPT_STATUS); ADD(TELQUAL_IS); /* * We check the want_state rather than the current state, * because if we received a DO/WILL for an option that we * don't support, and the other side didn't send a DONT/WONT * in response to our WONT/DONT, then the "state" will be * WILL/DO, and the "want_state" will be WONT/DONT. We * need to go by the latter. */ for (i = 0; i < (unsigned char)NTELOPTS; i++) { if (my_want_state_is_will(i)) { ADD(WILL); ADD_DATA(i); if (i == IAC) ADD(IAC); } if (his_want_state_is_will(i)) { ADD(DO); ADD_DATA(i); if (i == IAC) ADD(IAC); } } if (his_want_state_is_will(TELOPT_LFLOW)) { ADD(SB); ADD(TELOPT_LFLOW); if (flowmode) { ADD(LFLOW_ON); } else { ADD(LFLOW_OFF); } ADD(SE); if (restartany >= 0) { ADD(SB); ADD(TELOPT_LFLOW); if (restartany) { ADD(LFLOW_RESTART_ANY); } else { ADD(LFLOW_RESTART_XON); } ADD(SE); } } #ifdef LINEMODE if (his_want_state_is_will(TELOPT_LINEMODE)) { unsigned char *cp, *cpe; int len; ADD(SB); ADD(TELOPT_LINEMODE); ADD(LM_MODE); ADD_DATA(editmode); ADD(SE); ADD(SB); ADD(TELOPT_LINEMODE); ADD(LM_SLC); start_slc(0); send_slc(); len = end_slc(&cp); for (cpe = cp + len; cp < cpe; cp++) ADD_DATA(*cp); ADD(SE); } #endif /* LINEMODE */ ADD(IAC); ADD(SE); output_datalen(statusbuf, ncp - statusbuf); netflush(); /* Send it on its way */ DIAG(TD_OPTIONS, {printsub('>', statusbuf, ncp - statusbuf); netflush();}); } /* * This function appends data to nfrontp and advances nfrontp. * Returns the number of characters written altogether (the * buffer may have been flushed in the process). */ int output_data(const char *format, ...) { va_list args; int len; char *buf; va_start(args, format); if ((len = vasprintf(&buf, format, args)) == -1) { va_end(args); return -1; } output_datalen(buf, len); va_end(args); free(buf); return (len); } void output_datalen(const char *buf, int len) { int remaining, copied; remaining = BUFSIZ - (nfrontp - netobuf); while (len > 0) { /* Free up enough space if the room is too low*/ if ((len > BUFSIZ ? BUFSIZ : len) > remaining) { netflush(); remaining = BUFSIZ - (nfrontp - netobuf); } /* Copy out as much as will fit */ copied = remaining > len ? len : remaining; memmove(nfrontp, buf, copied); nfrontp += copied; len -= copied; remaining -= copied; buf += copied; } return; }