/* * Copyright (c) 1989, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)sys_term.c 8.4+1 (Berkeley) 5/30/95 * $FreeBSD: src/crypto/telnet/telnetd/sys_term.c,v 1.7.2.5 2002/06/17 02:48:02 jmallett Exp $ * $DragonFly: src/crypto/telnet/telnetd/sys_term.c,v 1.2 2003/06/17 04:24:37 dillon Exp $ */ #include #include #include #include #include #include "telnetd.h" #include "pathnames.h" #ifdef AUTHENTICATION #include #endif int cleanopen(char *); void scrub_env(void); struct utmp wtmp; #ifdef _PATH_WTMP char wtmpf[] = _PATH_WTMP; #else char wtmpf[] = "/var/log/wtmp"; #endif #ifdef _PATH_UTMP char utmpf[] = _PATH_UTMP; #else char utmpf[] = "/var/run/utmp"; #endif char *envinit[3]; extern char **environ; #define SCPYN(a, b) (void) strncpy(a, b, sizeof(a)) #define SCMPN(a, b) strncmp(a, b, sizeof(a)) #ifdef t_erase #undef t_erase #undef t_kill #undef t_intrc #undef t_quitc #undef t_startc #undef t_stopc #undef t_eofc #undef t_brkc #undef t_suspc #undef t_dsuspc #undef t_rprntc #undef t_flushc #undef t_werasc #undef t_lnextc #endif #ifndef USE_TERMIO struct termbuf { struct sgttyb sg; struct tchars tc; struct ltchars ltc; int state; int lflags; } termbuf, termbuf2; # define cfsetospeed(tp, val) (tp)->sg.sg_ospeed = (val) # define cfsetispeed(tp, val) (tp)->sg.sg_ispeed = (val) # define cfgetospeed(tp) (tp)->sg.sg_ospeed # define cfgetispeed(tp) (tp)->sg.sg_ispeed #else /* USE_TERMIO */ # ifndef TCSANOW # ifdef TCSETS # define TCSANOW TCSETS # define TCSADRAIN TCSETSW # define tcgetattr(f, t) ioctl(f, TCGETS, (char *)t) # else # ifdef TCSETA # define TCSANOW TCSETA # define TCSADRAIN TCSETAW # define tcgetattr(f, t) ioctl(f, TCGETA, (char *)t) # else # define TCSANOW TIOCSETA # define TCSADRAIN TIOCSETAW # define tcgetattr(f, t) ioctl(f, TIOCGETA, (char *)t) # endif # endif # define tcsetattr(f, a, t) ioctl(f, a, t) # define cfsetospeed(tp, val) (tp)->c_cflag &= ~CBAUD; \ (tp)->c_cflag |= (val) # define cfgetospeed(tp) ((tp)->c_cflag & CBAUD) # ifdef CIBAUD # define cfsetispeed(tp, val) (tp)->c_cflag &= ~CIBAUD; \ (tp)->c_cflag |= ((val)<c_cflag & CIBAUD)>>IBSHIFT) # else # define cfsetispeed(tp, val) (tp)->c_cflag &= ~CBAUD; \ (tp)->c_cflag |= (val) # define cfgetispeed(tp) ((tp)->c_cflag & CBAUD) # endif # endif /* TCSANOW */ struct termios termbuf, termbuf2; /* pty control structure */ #endif /* USE_TERMIO */ #include #include int cleanopen(char *); void scrub_env(void); static char **addarg(char **, const char *); /* * init_termbuf() * copy_termbuf(cp) * set_termbuf() * * These three routines are used to get and set the "termbuf" structure * to and from the kernel. init_termbuf() gets the current settings. * copy_termbuf() hands in a new "termbuf" to write to the kernel, and * set_termbuf() writes the structure into the kernel. */ void init_termbuf(void) { #ifndef USE_TERMIO (void) ioctl(pty, TIOCGETP, (char *)&termbuf.sg); (void) ioctl(pty, TIOCGETC, (char *)&termbuf.tc); (void) ioctl(pty, TIOCGLTC, (char *)&termbuf.ltc); # ifdef TIOCGSTATE (void) ioctl(pty, TIOCGSTATE, (char *)&termbuf.state); # endif #else (void) tcgetattr(pty, &termbuf); #endif termbuf2 = termbuf; } #if defined(LINEMODE) && defined(TIOCPKT_IOCTL) void copy_termbuf(char *cp, size_t len) { if (len > sizeof(termbuf)) len = sizeof(termbuf); memmove((char *)&termbuf, cp, len); termbuf2 = termbuf; } #endif /* defined(LINEMODE) && defined(TIOCPKT_IOCTL) */ void set_termbuf(void) { /* * Only make the necessary changes. */ #ifndef USE_TERMIO if (memcmp((char *)&termbuf.sg, (char *)&termbuf2.sg, sizeof(termbuf.sg))) (void) ioctl(pty, TIOCSETN, (char *)&termbuf.sg); if (memcmp((char *)&termbuf.tc, (char *)&termbuf2.tc, sizeof(termbuf.tc))) (void) ioctl(pty, TIOCSETC, (char *)&termbuf.tc); if (memcmp((char *)&termbuf.ltc, (char *)&termbuf2.ltc, sizeof(termbuf.ltc))) (void) ioctl(pty, TIOCSLTC, (char *)&termbuf.ltc); if (termbuf.lflags != termbuf2.lflags) (void) ioctl(pty, TIOCLSET, (char *)&termbuf.lflags); #else /* USE_TERMIO */ if (memcmp((char *)&termbuf, (char *)&termbuf2, sizeof(termbuf))) (void) tcsetattr(pty, TCSANOW, &termbuf); #endif /* USE_TERMIO */ } /* * spcset(func, valp, valpp) * * This function takes various special characters (func), and * sets *valp to the current value of that character, and * *valpp to point to where in the "termbuf" structure that * value is kept. * * It returns the SLC_ level of support for this function. */ #ifndef USE_TERMIO int spcset(int func, cc_t *valp, cc_t **valpp) { switch(func) { case SLC_EOF: *valp = termbuf.tc.t_eofc; *valpp = (cc_t *)&termbuf.tc.t_eofc; return(SLC_VARIABLE); case SLC_EC: *valp = termbuf.sg.sg_erase; *valpp = (cc_t *)&termbuf.sg.sg_erase; return(SLC_VARIABLE); case SLC_EL: *valp = termbuf.sg.sg_kill; *valpp = (cc_t *)&termbuf.sg.sg_kill; return(SLC_VARIABLE); case SLC_IP: *valp = termbuf.tc.t_intrc; *valpp = (cc_t *)&termbuf.tc.t_intrc; return(SLC_VARIABLE|SLC_FLUSHIN|SLC_FLUSHOUT); case SLC_ABORT: *valp = termbuf.tc.t_quitc; *valpp = (cc_t *)&termbuf.tc.t_quitc; return(SLC_VARIABLE|SLC_FLUSHIN|SLC_FLUSHOUT); case SLC_XON: *valp = termbuf.tc.t_startc; *valpp = (cc_t *)&termbuf.tc.t_startc; return(SLC_VARIABLE); case SLC_XOFF: *valp = termbuf.tc.t_stopc; *valpp = (cc_t *)&termbuf.tc.t_stopc; return(SLC_VARIABLE); case SLC_AO: *valp = termbuf.ltc.t_flushc; *valpp = (cc_t *)&termbuf.ltc.t_flushc; return(SLC_VARIABLE); case SLC_SUSP: *valp = termbuf.ltc.t_suspc; *valpp = (cc_t *)&termbuf.ltc.t_suspc; return(SLC_VARIABLE); case SLC_EW: *valp = termbuf.ltc.t_werasc; *valpp = (cc_t *)&termbuf.ltc.t_werasc; return(SLC_VARIABLE); case SLC_RP: *valp = termbuf.ltc.t_rprntc; *valpp = (cc_t *)&termbuf.ltc.t_rprntc; return(SLC_VARIABLE); case SLC_LNEXT: *valp = termbuf.ltc.t_lnextc; *valpp = (cc_t *)&termbuf.ltc.t_lnextc; return(SLC_VARIABLE); case SLC_FORW1: *valp = termbuf.tc.t_brkc; *valpp = (cc_t *)&termbuf.ltc.t_lnextc; return(SLC_VARIABLE); case SLC_BRK: case SLC_SYNCH: case SLC_AYT: case SLC_EOR: *valp = (cc_t)0; *valpp = (cc_t *)0; return(SLC_DEFAULT); default: *valp = (cc_t)0; *valpp = (cc_t *)0; return(SLC_NOSUPPORT); } } #else /* USE_TERMIO */ #define setval(a, b) *valp = termbuf.c_cc[a]; \ *valpp = &termbuf.c_cc[a]; \ return(b); #define defval(a) *valp = ((cc_t)a); *valpp = (cc_t *)0; return(SLC_DEFAULT); int spcset(int func, cc_t *valp, cc_t **valpp) { switch(func) { case SLC_EOF: setval(VEOF, SLC_VARIABLE); case SLC_EC: setval(VERASE, SLC_VARIABLE); case SLC_EL: setval(VKILL, SLC_VARIABLE); case SLC_IP: setval(VINTR, SLC_VARIABLE|SLC_FLUSHIN|SLC_FLUSHOUT); case SLC_ABORT: setval(VQUIT, SLC_VARIABLE|SLC_FLUSHIN|SLC_FLUSHOUT); case SLC_XON: #ifdef VSTART setval(VSTART, SLC_VARIABLE); #else defval(0x13); #endif case SLC_XOFF: #ifdef VSTOP setval(VSTOP, SLC_VARIABLE); #else defval(0x11); #endif case SLC_EW: #ifdef VWERASE setval(VWERASE, SLC_VARIABLE); #else defval(0); #endif case SLC_RP: #ifdef VREPRINT setval(VREPRINT, SLC_VARIABLE); #else defval(0); #endif case SLC_LNEXT: #ifdef VLNEXT setval(VLNEXT, SLC_VARIABLE); #else defval(0); #endif case SLC_AO: #if !defined(VDISCARD) && defined(VFLUSHO) # define VDISCARD VFLUSHO #endif #ifdef VDISCARD setval(VDISCARD, SLC_VARIABLE|SLC_FLUSHOUT); #else defval(0); #endif case SLC_SUSP: #ifdef VSUSP setval(VSUSP, SLC_VARIABLE|SLC_FLUSHIN); #else defval(0); #endif #ifdef VEOL case SLC_FORW1: setval(VEOL, SLC_VARIABLE); #endif #ifdef VEOL2 case SLC_FORW2: setval(VEOL2, SLC_VARIABLE); #endif case SLC_AYT: #ifdef VSTATUS setval(VSTATUS, SLC_VARIABLE); #else defval(0); #endif case SLC_BRK: case SLC_SYNCH: case SLC_EOR: defval(0); default: *valp = 0; *valpp = 0; return(SLC_NOSUPPORT); } } #endif /* USE_TERMIO */ /* * getpty() * * Allocate a pty. As a side effect, the external character * array "line" contains the name of the slave side. * * Returns the file descriptor of the opened pty. */ char alpha[] = "0123456789abcdefghijklmnopqrstuv"; char line[16]; int getpty(int *ptynum __unused) { int p; const char *cp; char *p1, *p2; int i; (void) strcpy(line, _PATH_DEV); (void) strcat(line, "ptyXX"); p1 = &line[8]; p2 = &line[9]; for (cp = "pqrsPQRS"; *cp; cp++) { struct stat stb; *p1 = *cp; *p2 = '0'; /* * This stat() check is just to keep us from * looping through all 256 combinations if there * aren't that many ptys available. */ if (stat(line, &stb) < 0) break; for (i = 0; i < 32; i++) { *p2 = alpha[i]; p = open(line, 2); if (p > 0) { line[5] = 't'; chown(line, 0, 0); chmod(line, 0600); return(p); } } } return(-1); } #ifdef LINEMODE /* * tty_flowmode() Find out if flow control is enabled or disabled. * tty_linemode() Find out if linemode (external processing) is enabled. * tty_setlinemod(on) Turn on/off linemode. * tty_isecho() Find out if echoing is turned on. * tty_setecho(on) Enable/disable character echoing. * tty_israw() Find out if terminal is in RAW mode. * tty_binaryin(on) Turn on/off BINARY on input. * tty_binaryout(on) Turn on/off BINARY on output. * tty_isediting() Find out if line editing is enabled. * tty_istrapsig() Find out if signal trapping is enabled. * tty_setedit(on) Turn on/off line editing. * tty_setsig(on) Turn on/off signal trapping. * tty_issofttab() Find out if tab expansion is enabled. * tty_setsofttab(on) Turn on/off soft tab expansion. * tty_islitecho() Find out if typed control chars are echoed literally * tty_setlitecho() Turn on/off literal echo of control chars * tty_tspeed(val) Set transmit speed to val. * tty_rspeed(val) Set receive speed to val. */ int tty_linemode(void) { #ifndef USE_TERMIO return(termbuf.state & TS_EXTPROC); #else return(termbuf.c_lflag & EXTPROC); #endif } void tty_setlinemode(int on) { #ifdef TIOCEXT set_termbuf(); (void) ioctl(pty, TIOCEXT, (char *)&on); init_termbuf(); #else /* !TIOCEXT */ # ifdef EXTPROC if (on) termbuf.c_lflag |= EXTPROC; else termbuf.c_lflag &= ~EXTPROC; # endif #endif /* TIOCEXT */ } #endif /* LINEMODE */ int tty_isecho(void) { #ifndef USE_TERMIO return (termbuf.sg.sg_flags & ECHO); #else return (termbuf.c_lflag & ECHO); #endif } int tty_flowmode(void) { #ifndef USE_TERMIO return(((termbuf.tc.t_startc) > 0 && (termbuf.tc.t_stopc) > 0) ? 1 : 0); #else return((termbuf.c_iflag & IXON) ? 1 : 0); #endif } int tty_restartany(void) { #ifndef USE_TERMIO # ifdef DECCTQ return((termbuf.lflags & DECCTQ) ? 0 : 1); # else return(-1); # endif #else return((termbuf.c_iflag & IXANY) ? 1 : 0); #endif } void tty_setecho(int on) { #ifndef USE_TERMIO if (on) termbuf.sg.sg_flags |= ECHO|CRMOD; else termbuf.sg.sg_flags &= ~(ECHO|CRMOD); #else if (on) termbuf.c_lflag |= ECHO; else termbuf.c_lflag &= ~ECHO; #endif } int tty_israw(void) { #ifndef USE_TERMIO return(termbuf.sg.sg_flags & RAW); #else return(!(termbuf.c_lflag & ICANON)); #endif } #ifdef AUTHENTICATION #if defined(NO_LOGIN_F) && defined(LOGIN_R) int tty_setraw(int on) { # ifndef USE_TERMIO if (on) termbuf.sg.sg_flags |= RAW; else termbuf.sg.sg_flags &= ~RAW; # else if (on) termbuf.c_lflag &= ~ICANON; else termbuf.c_lflag |= ICANON; # endif } #endif #endif /* AUTHENTICATION */ void tty_binaryin(int on) { #ifndef USE_TERMIO if (on) termbuf.lflags |= LPASS8; else termbuf.lflags &= ~LPASS8; #else if (on) { termbuf.c_iflag &= ~ISTRIP; } else { termbuf.c_iflag |= ISTRIP; } #endif } void tty_binaryout(int on) { #ifndef USE_TERMIO if (on) termbuf.lflags |= LLITOUT; else termbuf.lflags &= ~LLITOUT; #else if (on) { termbuf.c_cflag &= ~(CSIZE|PARENB); termbuf.c_cflag |= CS8; termbuf.c_oflag &= ~OPOST; } else { termbuf.c_cflag &= ~CSIZE; termbuf.c_cflag |= CS7|PARENB; termbuf.c_oflag |= OPOST; } #endif } int tty_isbinaryin(void) { #ifndef USE_TERMIO return(termbuf.lflags & LPASS8); #else return(!(termbuf.c_iflag & ISTRIP)); #endif } int tty_isbinaryout(void) { #ifndef USE_TERMIO return(termbuf.lflags & LLITOUT); #else return(!(termbuf.c_oflag&OPOST)); #endif } #ifdef LINEMODE int tty_isediting(void) { #ifndef USE_TERMIO return(!(termbuf.sg.sg_flags & (CBREAK|RAW))); #else return(termbuf.c_lflag & ICANON); #endif } int tty_istrapsig(void) { #ifndef USE_TERMIO return(!(termbuf.sg.sg_flags&RAW)); #else return(termbuf.c_lflag & ISIG); #endif } void tty_setedit(int on) { #ifndef USE_TERMIO if (on) termbuf.sg.sg_flags &= ~CBREAK; else termbuf.sg.sg_flags |= CBREAK; #else if (on) termbuf.c_lflag |= ICANON; else termbuf.c_lflag &= ~ICANON; #endif } void tty_setsig(int on) { #ifndef USE_TERMIO if (on) ; #else if (on) termbuf.c_lflag |= ISIG; else termbuf.c_lflag &= ~ISIG; #endif } #endif /* LINEMODE */ int tty_issofttab(void) { #ifndef USE_TERMIO return (termbuf.sg.sg_flags & XTABS); #else # ifdef OXTABS return (termbuf.c_oflag & OXTABS); # endif # ifdef TABDLY return ((termbuf.c_oflag & TABDLY) == TAB3); # endif #endif } void tty_setsofttab(int on) { #ifndef USE_TERMIO if (on) termbuf.sg.sg_flags |= XTABS; else termbuf.sg.sg_flags &= ~XTABS; #else if (on) { # ifdef OXTABS termbuf.c_oflag |= OXTABS; # endif # ifdef TABDLY termbuf.c_oflag &= ~TABDLY; termbuf.c_oflag |= TAB3; # endif } else { # ifdef OXTABS termbuf.c_oflag &= ~OXTABS; # endif # ifdef TABDLY termbuf.c_oflag &= ~TABDLY; termbuf.c_oflag |= TAB0; # endif } #endif } int tty_islitecho(void) { #ifndef USE_TERMIO return (!(termbuf.lflags & LCTLECH)); #else # ifdef ECHOCTL return (!(termbuf.c_lflag & ECHOCTL)); # endif # ifdef TCTLECH return (!(termbuf.c_lflag & TCTLECH)); # endif # if !defined(ECHOCTL) && !defined(TCTLECH) return (0); /* assumes ctl chars are echoed '^x' */ # endif #endif } void tty_setlitecho(int on) { #ifndef USE_TERMIO if (on) termbuf.lflags &= ~LCTLECH; else termbuf.lflags |= LCTLECH; #else # ifdef ECHOCTL if (on) termbuf.c_lflag &= ~ECHOCTL; else termbuf.c_lflag |= ECHOCTL; # endif # ifdef TCTLECH if (on) termbuf.c_lflag &= ~TCTLECH; else termbuf.c_lflag |= TCTLECH; # endif #endif } int tty_iscrnl(void) { #ifndef USE_TERMIO return (termbuf.sg.sg_flags & CRMOD); #else return (termbuf.c_iflag & ICRNL); #endif } /* * Try to guess whether speeds are "encoded" (4.2BSD) or just numeric (4.4BSD). */ #if B4800 != 4800 #define DECODE_BAUD #endif #ifdef DECODE_BAUD /* * A table of available terminal speeds */ struct termspeeds { int speed; int value; } termspeeds[] = { { 0, B0 }, { 50, B50 }, { 75, B75 }, { 110, B110 }, { 134, B134 }, { 150, B150 }, { 200, B200 }, { 300, B300 }, { 600, B600 }, { 1200, B1200 }, { 1800, B1800 }, { 2400, B2400 }, { 4800, B4800 }, #ifdef B7200 { 7200, B7200 }, #endif { 9600, B9600 }, #ifdef B14400 { 14400, B14400 }, #endif #ifdef B19200 { 19200, B19200 }, #endif #ifdef B28800 { 28800, B28800 }, #endif #ifdef B38400 { 38400, B38400 }, #endif #ifdef B57600 { 57600, B57600 }, #endif #ifdef B115200 { 115200, B115200 }, #endif #ifdef B230400 { 230400, B230400 }, #endif { -1, 0 } }; #endif /* DECODE_BAUD */ void tty_tspeed(int val) { #ifdef DECODE_BAUD struct termspeeds *tp; for (tp = termspeeds; (tp->speed != -1) && (val > tp->speed); tp++) ; if (tp->speed == -1) /* back up to last valid value */ --tp; cfsetospeed(&termbuf, tp->value); #else /* DECODE_BAUD */ cfsetospeed(&termbuf, val); #endif /* DECODE_BAUD */ } void tty_rspeed(int val) { #ifdef DECODE_BAUD struct termspeeds *tp; for (tp = termspeeds; (tp->speed != -1) && (val > tp->speed); tp++) ; if (tp->speed == -1) /* back up to last valid value */ --tp; cfsetispeed(&termbuf, tp->value); #else /* DECODE_BAUD */ cfsetispeed(&termbuf, val); #endif /* DECODE_BAUD */ } /* * getptyslave() * * Open the slave side of the pty, and do any initialization * that is necessary. */ static void getptyslave(void) { int t = -1; char erase; # ifdef LINEMODE int waslm; # endif # ifdef TIOCGWINSZ struct winsize ws; extern int def_row, def_col; # endif extern int def_tspeed, def_rspeed; /* * Opening the slave side may cause initilization of the * kernel tty structure. We need remember the state of * if linemode was turned on * terminal window size * terminal speed * erase character * so that we can re-set them if we need to. */ # ifdef LINEMODE waslm = tty_linemode(); # endif erase = termbuf.c_cc[VERASE]; /* * Make sure that we don't have a controlling tty, and * that we are the session (process group) leader. */ # ifdef TIOCNOTTY t = open(_PATH_TTY, O_RDWR); if (t >= 0) { (void) ioctl(t, TIOCNOTTY, (char *)0); (void) close(t); } # endif t = cleanopen(line); if (t < 0) fatalperror(net, line); /* * set up the tty modes as we like them to be. */ init_termbuf(); # ifdef TIOCGWINSZ if (def_row || def_col) { memset((char *)&ws, 0, sizeof(ws)); ws.ws_col = def_col; ws.ws_row = def_row; (void)ioctl(t, TIOCSWINSZ, (char *)&ws); } # endif /* * Settings for sgtty based systems */ # ifndef USE_TERMIO termbuf.sg.sg_flags |= CRMOD|ANYP|ECHO|XTABS; # endif /* USE_TERMIO */ /* * Settings for all other termios/termio based * systems, other than 4.4BSD. In 4.4BSD the * kernel does the initial terminal setup. */ tty_rspeed((def_rspeed > 0) ? def_rspeed : 9600); tty_tspeed((def_tspeed > 0) ? def_tspeed : 9600); if (erase) termbuf.c_cc[VERASE] = erase; # ifdef LINEMODE if (waslm) tty_setlinemode(1); # endif /* LINEMODE */ /* * Set the tty modes, and make this our controlling tty. */ set_termbuf(); if (login_tty(t) == -1) fatalperror(net, "login_tty"); if (net > 2) (void) close(net); #ifdef AUTHENTICATION #if defined(NO_LOGIN_F) && defined(LOGIN_R) /* * Leave the pty open so that we can write out the rlogin * protocol for /bin/login, if the authentication works. */ #else if (pty > 2) { (void) close(pty); pty = -1; } #endif #endif /* AUTHENTICATION */ } #ifndef O_NOCTTY #define O_NOCTTY 0 #endif /* * Open the specified slave side of the pty, * making sure that we have a clean tty. */ int cleanopen(char *li) { int t; /* * Make sure that other people can't open the * slave side of the connection. */ (void) chown(li, 0, 0); (void) chmod(li, 0600); (void) revoke(li); t = open(line, O_RDWR|O_NOCTTY); if (t < 0) return(-1); return(t); } /* * startslave(host) * * Given a hostname, do whatever * is necessary to startup the login process on the slave side of the pty. */ /* ARGSUSED */ void startslave(char *host, int autologin, char *autoname) { int i; #ifdef AUTHENTICATION if (!autoname || !autoname[0]) autologin = 0; if (autologin < auth_level) { fatal(net, "Authorization failed"); exit(1); } #endif if ((i = fork()) < 0) fatalperror(net, "fork"); if (i) { } else { getptyslave(); start_login(host, autologin, autoname); /*NOTREACHED*/ } } void init_env(void) { char **envp; envp = envinit; if ((*envp = getenv("TZ"))) *envp++ -= 3; *envp = 0; environ = envinit; } /* * start_login(host) * * Assuming that we are now running as a child processes, this * function will turn us into the login process. */ #ifndef AUTHENTICATION #define undef1 __unused #else #define undef1 #endif void start_login(char *host undef1, int autologin undef1, char *name undef1) { char **argv; scrub_env(); /* * -h : pass on name of host. * WARNING: -h is accepted by login if and only if * getuid() == 0. * -p : don't clobber the environment (so terminal type stays set). * * -f : force this login, he has already been authenticated */ argv = addarg(0, "login"); #if !defined(NO_LOGIN_H) #ifdef AUTHENTICATION # if defined(NO_LOGIN_F) && defined(LOGIN_R) /* * Don't add the "-h host" option if we are going * to be adding the "-r host" option down below... */ if ((auth_level < 0) || (autologin != AUTH_VALID)) # endif { argv = addarg(argv, "-h"); argv = addarg(argv, host); } #endif /* AUTHENTICATION */ #endif #if !defined(NO_LOGIN_P) argv = addarg(argv, "-p"); #endif #ifdef LINEMODE /* * Set the environment variable "LINEMODE" to either * "real" or "kludge" if we are operating in either * real or kludge linemode. */ if (lmodetype == REAL_LINEMODE) setenv("LINEMODE", "real", 1); # ifdef KLUDGELINEMODE else if (lmodetype == KLUDGE_LINEMODE || lmodetype == KLUDGE_OK) setenv("LINEMODE", "kludge", 1); # endif #endif #ifdef BFTPDAEMON /* * Are we working as the bftp daemon? If so, then ask login * to start bftp instead of shell. */ if (bftpd) { argv = addarg(argv, "-e"); argv = addarg(argv, BFTPPATH); } else #endif #ifdef AUTHENTICATION if (auth_level >= 0 && autologin == AUTH_VALID) { # if !defined(NO_LOGIN_F) argv = addarg(argv, "-f"); argv = addarg(argv, "--"); argv = addarg(argv, name); # else # if defined(LOGIN_R) /* * We don't have support for "login -f", but we * can fool /bin/login into thinking that we are * rlogind, and allow us to log in without a * password. The rlogin protocol expects * local-user\0remote-user\0term/speed\0 */ if (pty > 2) { char *cp; char speed[128]; int isecho, israw, xpty, len; extern int def_rspeed; # ifndef LOGIN_HOST /* * Tell login that we are coming from "localhost". * If we passed in the real host name, then the * user would have to allow .rhost access from * every machine that they want authenticated * access to work from, which sort of defeats * the purpose of an authenticated login... * So, we tell login that the session is coming * from "localhost", and the user will only have * to have "localhost" in their .rhost file. */ # define LOGIN_HOST "localhost" # endif argv = addarg(argv, "-r"); argv = addarg(argv, LOGIN_HOST); xpty = pty; pty = 0; init_termbuf(); isecho = tty_isecho(); israw = tty_israw(); if (isecho || !israw) { tty_setecho(0); /* Turn off echo */ tty_setraw(1); /* Turn on raw */ set_termbuf(); } len = strlen(name)+1; write(xpty, name, len); write(xpty, name, len); snprintf(speed, sizeof(speed), "%s/%d", (cp = getenv("TERM")) ? cp : "", (def_rspeed > 0) ? def_rspeed : 9600); len = strlen(speed)+1; write(xpty, speed, len); if (isecho || !israw) { init_termbuf(); tty_setecho(isecho); tty_setraw(israw); set_termbuf(); if (!israw) { /* * Write a newline to ensure * that login will be able to * read the line... */ write(xpty, "\n", 1); } } pty = xpty; } # else argv = addarg(argv, "--"); argv = addarg(argv, name); # endif # endif } else #endif if (getenv("USER")) { argv = addarg(argv, "--"); argv = addarg(argv, getenv("USER")); #if defined(LOGIN_ARGS) && defined(NO_LOGIN_P) { char **cpp; for (cpp = environ; *cpp; cpp++) argv = addarg(argv, *cpp); } #endif /* * Assume that login will set the USER variable * correctly. For SysV systems, this means that * USER will no longer be set, just LOGNAME by * login. (The problem is that if the auto-login * fails, and the user then specifies a different * account name, he can get logged in with both * LOGNAME and USER in his environment, but the * USER value will be wrong. */ unsetenv("USER"); } #ifdef AUTHENTICATION #if defined(NO_LOGIN_F) && defined(LOGIN_R) if (pty > 2) close(pty); #endif #endif /* AUTHENTICATION */ closelog(); if (altlogin == NULL) { altlogin = _PATH_LOGIN; } execv(altlogin, argv); syslog(LOG_ERR, "%s: %m", altlogin); fatalperror(net, altlogin); /*NOTREACHED*/ } static char ** addarg(char **argv, const char *val) { char **cpp; if (argv == NULL) { /* * 10 entries, a leading length, and a null */ argv = (char **)malloc(sizeof(*argv) * 12); if (argv == NULL) return(NULL); *argv++ = (char *)10; *argv = (char *)0; } for (cpp = argv; *cpp; cpp++) ; if (cpp == &argv[(long)argv[-1]]) { --argv; *argv = (char *)((long)(*argv) + 10); argv = (char **)realloc(argv, sizeof(*argv)*((long)(*argv) + 2)); if (argv == NULL) return(NULL); argv++; cpp = &argv[(long)argv[-1] - 10]; } *cpp++ = strdup(val); *cpp = 0; return(argv); } /* * scrub_env() * * We only accept the environment variables listed below. */ void scrub_env(void) { static const char *rej[] = { "TERMCAP=/", NULL }; static const char *acc[] = { "XAUTH=", "XAUTHORITY=", "DISPLAY=", "TERM=", "EDITOR=", "PAGER=", "LOGNAME=", "POSIXLY_CORRECT=", "PRINTER=", NULL }; char **cpp, **cpp2; const char **p; for (cpp2 = cpp = environ; *cpp; cpp++) { int reject_it = 0; for(p = rej; *p; p++) if(strncmp(*cpp, *p, strlen(*p)) == 0) { reject_it = 1; break; } if (reject_it) continue; for(p = acc; *p; p++) if(strncmp(*cpp, *p, strlen(*p)) == 0) break; if(*p != NULL) *cpp2++ = *cpp; } *cpp2 = NULL; } /* * cleanup() * * This is the routine to call when we are all through, to * clean up anything that needs to be cleaned up. */ /* ARGSUSED */ void cleanup(int sig __unused) { char *p; sigset_t mask; p = line + sizeof(_PATH_DEV) - 1; /* * Block all signals before clearing the utmp entry. We don't want to * be called again after calling logout() and then not add the wtmp * entry because of not finding the corresponding entry in utmp. */ sigfillset(&mask); sigprocmask(SIG_SETMASK, &mask, NULL); if (logout(p)) logwtmp(p, "", ""); (void)chmod(line, 0666); (void)chown(line, 0, 0); *p = 'p'; (void)chmod(line, 0666); (void)chown(line, 0, 0); (void) shutdown(net, 2); _exit(1); }