/* $FreeBSD: head/sys/dev/usb/controller/ohci.c 267992 2014-06-28 03:56:17Z hselasky $ */ /*- * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. * Copyright (c) 1998 Lennart Augustsson. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * USB Open Host Controller driver. * * OHCI spec: http://www.compaq.com/productinfo/development/openhci.html * USB spec: http://www.usb.org/developers/docs/usbspec.zip */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define USB_DEBUG_VAR ohcidebug #include #include #include #include #include #include #include #include #include #include #include #include #define OHCI_BUS2SC(bus) \ ((ohci_softc_t *)(((uint8_t *)(bus)) - \ ((uint8_t *)&(((ohci_softc_t *)0)->sc_bus)))) #ifdef USB_DEBUG static int ohcidebug = 0; static SYSCTL_NODE(_hw_usb, OID_AUTO, ohci, CTLFLAG_RW, 0, "USB ohci"); SYSCTL_INT(_hw_usb_ohci, OID_AUTO, debug, CTLFLAG_RW, &ohcidebug, 0, "ohci debug level"); TUNABLE_INT("hw.usb.ohci.debug", &ohcidebug); static void ohci_dumpregs(ohci_softc_t *); static void ohci_dump_tds(ohci_td_t *); static uint8_t ohci_dump_td(ohci_td_t *); static void ohci_dump_ed(ohci_ed_t *); static uint8_t ohci_dump_itd(ohci_itd_t *); static void ohci_dump_itds(ohci_itd_t *); #endif #define OBARR(sc) bus_space_barrier((sc)->sc_io_tag, (sc)->sc_io_hdl, 0, (sc)->sc_io_size, \ BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE) #define OWRITE1(sc, r, x) \ do { OBARR(sc); bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (r), (x)); } while (0) #define OWRITE2(sc, r, x) \ do { OBARR(sc); bus_space_write_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (r), (x)); } while (0) #define OWRITE4(sc, r, x) \ do { OBARR(sc); bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (r), (x)); } while (0) #define OREAD1(sc, r) (OBARR(sc), bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (r))) #define OREAD2(sc, r) (OBARR(sc), bus_space_read_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (r))) #define OREAD4(sc, r) (OBARR(sc), bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (r))) #define OHCI_INTR_ENDPT 1 static const struct usb_bus_methods ohci_bus_methods; static const struct usb_pipe_methods ohci_device_bulk_methods; static const struct usb_pipe_methods ohci_device_ctrl_methods; static const struct usb_pipe_methods ohci_device_intr_methods; static const struct usb_pipe_methods ohci_device_isoc_methods; static void ohci_do_poll(struct usb_bus *bus); static void ohci_device_done(struct usb_xfer *xfer, usb_error_t error); static void ohci_timeout(void *arg); static uint8_t ohci_check_transfer(struct usb_xfer *xfer); static void ohci_root_intr(ohci_softc_t *sc); struct ohci_std_temp { struct usb_page_cache *pc; ohci_td_t *td; ohci_td_t *td_next; uint32_t average; uint32_t td_flags; uint32_t len; uint16_t max_frame_size; uint8_t shortpkt; uint8_t setup_alt_next; uint8_t last_frame; }; static struct ohci_hcca * ohci_get_hcca(ohci_softc_t *sc) { usb_pc_cpu_invalidate(&sc->sc_hw.hcca_pc); return (sc->sc_hcca_p); } void ohci_iterate_hw_softc(struct usb_bus *bus, usb_bus_mem_sub_cb_t *cb) { struct ohci_softc *sc = OHCI_BUS2SC(bus); uint32_t i; cb(bus, &sc->sc_hw.hcca_pc, &sc->sc_hw.hcca_pg, sizeof(ohci_hcca_t), OHCI_HCCA_ALIGN); cb(bus, &sc->sc_hw.ctrl_start_pc, &sc->sc_hw.ctrl_start_pg, sizeof(ohci_ed_t), OHCI_ED_ALIGN); cb(bus, &sc->sc_hw.bulk_start_pc, &sc->sc_hw.bulk_start_pg, sizeof(ohci_ed_t), OHCI_ED_ALIGN); cb(bus, &sc->sc_hw.isoc_start_pc, &sc->sc_hw.isoc_start_pg, sizeof(ohci_ed_t), OHCI_ED_ALIGN); for (i = 0; i != OHCI_NO_EDS; i++) { cb(bus, sc->sc_hw.intr_start_pc + i, sc->sc_hw.intr_start_pg + i, sizeof(ohci_ed_t), OHCI_ED_ALIGN); } } static usb_error_t ohci_controller_init(ohci_softc_t *sc, int do_suspend) { struct usb_page_search buf_res; uint32_t i; uint32_t ctl; uint32_t ival; uint32_t hcr; uint32_t fm; uint32_t per; uint32_t desca; /* Determine in what context we are running. */ ctl = OREAD4(sc, OHCI_CONTROL); if (ctl & OHCI_IR) { /* SMM active, request change */ DPRINTF("SMM active, request owner change\n"); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_OCR); for (i = 0; (i < 100) && (ctl & OHCI_IR); i++) { usb_pause_mtx(NULL, hz / 1000); ctl = OREAD4(sc, OHCI_CONTROL); } if (ctl & OHCI_IR) { device_printf(sc->sc_bus.bdev, "SMM does not respond, resetting\n"); OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); goto reset; } } else { DPRINTF("cold started\n"); reset: /* controller was cold started */ usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_BUS_RESET_DELAY)); } /* * This reset should not be necessary according to the OHCI spec, but * without it some controllers do not start. */ DPRINTF("%s: resetting\n", device_get_nameunit(sc->sc_bus.bdev)); OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_BUS_RESET_DELAY)); /* we now own the host controller and the bus has been reset */ ival = OHCI_GET_IVAL(OREAD4(sc, OHCI_FM_INTERVAL)); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_HCR); /* Reset HC */ /* nominal time for a reset is 10 us */ for (i = 0; i < 10; i++) { DELAY(10); hcr = OREAD4(sc, OHCI_COMMAND_STATUS) & OHCI_HCR; if (!hcr) { break; } } if (hcr) { device_printf(sc->sc_bus.bdev, "reset timeout\n"); return (USB_ERR_IOERROR); } #ifdef USB_DEBUG if (ohcidebug > 15) { ohci_dumpregs(sc); } #endif if (do_suspend) { OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_SUSPEND); return (USB_ERR_NORMAL_COMPLETION); } /* The controller is now in SUSPEND state, we have 2ms to finish. */ /* set up HC registers */ usbd_get_page(&sc->sc_hw.hcca_pc, 0, &buf_res); OWRITE4(sc, OHCI_HCCA, buf_res.physaddr); usbd_get_page(&sc->sc_hw.ctrl_start_pc, 0, &buf_res); OWRITE4(sc, OHCI_CONTROL_HEAD_ED, buf_res.physaddr); usbd_get_page(&sc->sc_hw.bulk_start_pc, 0, &buf_res); OWRITE4(sc, OHCI_BULK_HEAD_ED, buf_res.physaddr); /* disable all interrupts and then switch on all desired interrupts */ OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS); OWRITE4(sc, OHCI_INTERRUPT_ENABLE, sc->sc_eintrs | OHCI_MIE); /* switch on desired functional features */ ctl = OREAD4(sc, OHCI_CONTROL); ctl &= ~(OHCI_CBSR_MASK | OHCI_LES | OHCI_HCFS_MASK | OHCI_IR); ctl |= OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE | OHCI_RATIO_1_4 | OHCI_HCFS_OPERATIONAL; /* And finally start it! */ OWRITE4(sc, OHCI_CONTROL, ctl); /* * The controller is now OPERATIONAL. Set a some final * registers that should be set earlier, but that the * controller ignores when in the SUSPEND state. */ fm = (OREAD4(sc, OHCI_FM_INTERVAL) & OHCI_FIT) ^ OHCI_FIT; fm |= OHCI_FSMPS(ival) | ival; OWRITE4(sc, OHCI_FM_INTERVAL, fm); per = OHCI_PERIODIC(ival); /* 90% periodic */ OWRITE4(sc, OHCI_PERIODIC_START, per); /* Fiddle the No OverCurrent Protection bit to avoid chip bug. */ desca = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca | OHCI_NOCP); OWRITE4(sc, OHCI_RH_STATUS, OHCI_LPSC); /* Enable port power */ usb_pause_mtx(NULL, USB_MS_TO_TICKS(OHCI_ENABLE_POWER_DELAY)); OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca); /* * The AMD756 requires a delay before re-reading the register, * otherwise it will occasionally report 0 ports. */ sc->sc_noport = 0; for (i = 0; (i < 10) && (sc->sc_noport == 0); i++) { usb_pause_mtx(NULL, USB_MS_TO_TICKS(OHCI_READ_DESC_DELAY)); sc->sc_noport = OHCI_GET_NDP(OREAD4(sc, OHCI_RH_DESCRIPTOR_A)); } #ifdef USB_DEBUG if (ohcidebug > 5) { ohci_dumpregs(sc); } #endif return (USB_ERR_NORMAL_COMPLETION); } static struct ohci_ed * ohci_init_ed(struct usb_page_cache *pc) { struct usb_page_search buf_res; struct ohci_ed *ed; usbd_get_page(pc, 0, &buf_res); ed = buf_res.buffer; ed->ed_self = htole32(buf_res.physaddr); ed->ed_flags = htole32(OHCI_ED_SKIP); ed->page_cache = pc; return (ed); } usb_error_t ohci_init(ohci_softc_t *sc) { struct usb_page_search buf_res; uint16_t i; uint16_t bit; uint16_t x; uint16_t y; DPRINTF("start\n"); sc->sc_eintrs = OHCI_NORMAL_INTRS; /* * Setup all ED's */ sc->sc_ctrl_p_last = ohci_init_ed(&sc->sc_hw.ctrl_start_pc); sc->sc_bulk_p_last = ohci_init_ed(&sc->sc_hw.bulk_start_pc); sc->sc_isoc_p_last = ohci_init_ed(&sc->sc_hw.isoc_start_pc); for (i = 0; i != OHCI_NO_EDS; i++) { sc->sc_intr_p_last[i] = ohci_init_ed(sc->sc_hw.intr_start_pc + i); } /* * the QHs are arranged to give poll intervals that are * powers of 2 times 1ms */ bit = OHCI_NO_EDS / 2; while (bit) { x = bit; while (x & bit) { ohci_ed_t *ed_x; ohci_ed_t *ed_y; y = (x ^ bit) | (bit / 2); /* * the next QH has half the poll interval */ ed_x = sc->sc_intr_p_last[x]; ed_y = sc->sc_intr_p_last[y]; ed_x->next = NULL; ed_x->ed_next = ed_y->ed_self; x++; } bit >>= 1; } if (1) { ohci_ed_t *ed_int; ohci_ed_t *ed_isc; ed_int = sc->sc_intr_p_last[0]; ed_isc = sc->sc_isoc_p_last; /* the last (1ms) QH */ ed_int->next = ed_isc; ed_int->ed_next = ed_isc->ed_self; } usbd_get_page(&sc->sc_hw.hcca_pc, 0, &buf_res); sc->sc_hcca_p = buf_res.buffer; /* * Fill HCCA interrupt table. The bit reversal is to get * the tree set up properly to spread the interrupts. */ for (i = 0; i != OHCI_NO_INTRS; i++) { sc->sc_hcca_p->hcca_interrupt_table[i] = sc->sc_intr_p_last[i | (OHCI_NO_EDS / 2)]->ed_self; } /* flush all cache into memory */ usb_bus_mem_flush_all(&sc->sc_bus, &ohci_iterate_hw_softc); /* set up the bus struct */ sc->sc_bus.methods = &ohci_bus_methods; usb_callout_init_mtx(&sc->sc_tmo_rhsc, &sc->sc_bus.bus_lock, 0); #ifdef USB_DEBUG if (ohcidebug > 15) { for (i = 0; i != OHCI_NO_EDS; i++) { kprintf("ed#%d ", i); ohci_dump_ed(sc->sc_intr_p_last[i]); } kprintf("iso "); ohci_dump_ed(sc->sc_isoc_p_last); } #endif sc->sc_bus.usbrev = USB_REV_1_0; if (ohci_controller_init(sc, 0) != 0) return (USB_ERR_INVAL); /* catch any lost interrupts */ ohci_do_poll(&sc->sc_bus); return (USB_ERR_NORMAL_COMPLETION); } /* * shut down the controller when the system is going down */ void ohci_detach(struct ohci_softc *sc) { USB_BUS_LOCK(&sc->sc_bus); usb_callout_stop(&sc->sc_tmo_rhsc); OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS); OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); USB_BUS_UNLOCK(&sc->sc_bus); /* XXX let stray task complete */ usb_pause_mtx(NULL, hz / 20); usb_callout_drain(&sc->sc_tmo_rhsc); } static void ohci_suspend(ohci_softc_t *sc) { DPRINTF("\n"); #ifdef USB_DEBUG if (ohcidebug > 2) ohci_dumpregs(sc); #endif /* reset HC and leave it suspended */ ohci_controller_init(sc, 1); } static void ohci_resume(ohci_softc_t *sc) { DPRINTF("\n"); #ifdef USB_DEBUG if (ohcidebug > 2) ohci_dumpregs(sc); #endif /* some broken BIOSes never initialize the Controller chip */ ohci_controller_init(sc, 0); /* catch any lost interrupts */ ohci_do_poll(&sc->sc_bus); } #ifdef USB_DEBUG static void ohci_dumpregs(ohci_softc_t *sc) { struct ohci_hcca *hcca; DPRINTF("ohci_dumpregs: rev=0x%08x control=0x%08x command=0x%08x\n", OREAD4(sc, OHCI_REVISION), OREAD4(sc, OHCI_CONTROL), OREAD4(sc, OHCI_COMMAND_STATUS)); DPRINTF(" intrstat=0x%08x intre=0x%08x intrd=0x%08x\n", OREAD4(sc, OHCI_INTERRUPT_STATUS), OREAD4(sc, OHCI_INTERRUPT_ENABLE), OREAD4(sc, OHCI_INTERRUPT_DISABLE)); DPRINTF(" hcca=0x%08x percur=0x%08x ctrlhd=0x%08x\n", OREAD4(sc, OHCI_HCCA), OREAD4(sc, OHCI_PERIOD_CURRENT_ED), OREAD4(sc, OHCI_CONTROL_HEAD_ED)); DPRINTF(" ctrlcur=0x%08x bulkhd=0x%08x bulkcur=0x%08x\n", OREAD4(sc, OHCI_CONTROL_CURRENT_ED), OREAD4(sc, OHCI_BULK_HEAD_ED), OREAD4(sc, OHCI_BULK_CURRENT_ED)); DPRINTF(" done=0x%08x fmival=0x%08x fmrem=0x%08x\n", OREAD4(sc, OHCI_DONE_HEAD), OREAD4(sc, OHCI_FM_INTERVAL), OREAD4(sc, OHCI_FM_REMAINING)); DPRINTF(" fmnum=0x%08x perst=0x%08x lsthrs=0x%08x\n", OREAD4(sc, OHCI_FM_NUMBER), OREAD4(sc, OHCI_PERIODIC_START), OREAD4(sc, OHCI_LS_THRESHOLD)); DPRINTF(" desca=0x%08x descb=0x%08x stat=0x%08x\n", OREAD4(sc, OHCI_RH_DESCRIPTOR_A), OREAD4(sc, OHCI_RH_DESCRIPTOR_B), OREAD4(sc, OHCI_RH_STATUS)); DPRINTF(" port1=0x%08x port2=0x%08x\n", OREAD4(sc, OHCI_RH_PORT_STATUS(1)), OREAD4(sc, OHCI_RH_PORT_STATUS(2))); hcca = ohci_get_hcca(sc); DPRINTF(" HCCA: frame_number=0x%04x done_head=0x%08x\n", le32toh(hcca->hcca_frame_number), le32toh(hcca->hcca_done_head)); } static void ohci_dump_tds(ohci_td_t *std) { for (; std; std = std->obj_next) { if (ohci_dump_td(std)) { break; } } } static uint8_t ohci_dump_td(ohci_td_t *std) { uint32_t td_flags; uint8_t temp; usb_pc_cpu_invalidate(std->page_cache); td_flags = le32toh(std->td_flags); temp = (std->td_next == 0); kprintf("TD(%p) at 0x%08x: %s%s%s%s%s delay=%d ec=%d " "cc=%d\ncbp=0x%08x next=0x%08x be=0x%08x\n", std, le32toh(std->td_self), (td_flags & OHCI_TD_R) ? "-R" : "", (td_flags & OHCI_TD_OUT) ? "-OUT" : "", (td_flags & OHCI_TD_IN) ? "-IN" : "", ((td_flags & OHCI_TD_TOGGLE_MASK) == OHCI_TD_TOGGLE_1) ? "-TOG1" : "", ((td_flags & OHCI_TD_TOGGLE_MASK) == OHCI_TD_TOGGLE_0) ? "-TOG0" : "", OHCI_TD_GET_DI(td_flags), OHCI_TD_GET_EC(td_flags), OHCI_TD_GET_CC(td_flags), le32toh(std->td_cbp), le32toh(std->td_next), le32toh(std->td_be)); return (temp); } static uint8_t ohci_dump_itd(ohci_itd_t *sitd) { uint32_t itd_flags; uint16_t i; uint8_t temp; usb_pc_cpu_invalidate(sitd->page_cache); itd_flags = le32toh(sitd->itd_flags); temp = (sitd->itd_next == 0); kprintf("ITD(%p) at 0x%08x: sf=%d di=%d fc=%d cc=%d\n" "bp0=0x%08x next=0x%08x be=0x%08x\n", sitd, le32toh(sitd->itd_self), OHCI_ITD_GET_SF(itd_flags), OHCI_ITD_GET_DI(itd_flags), OHCI_ITD_GET_FC(itd_flags), OHCI_ITD_GET_CC(itd_flags), le32toh(sitd->itd_bp0), le32toh(sitd->itd_next), le32toh(sitd->itd_be)); for (i = 0; i < OHCI_ITD_NOFFSET; i++) { kprintf("offs[%d]=0x%04x ", i, (uint32_t)le16toh(sitd->itd_offset[i])); } kprintf("\n"); return (temp); } static void ohci_dump_itds(ohci_itd_t *sitd) { for (; sitd; sitd = sitd->obj_next) { if (ohci_dump_itd(sitd)) { break; } } } static void ohci_dump_ed(ohci_ed_t *sed) { uint32_t ed_flags; uint32_t ed_headp; usb_pc_cpu_invalidate(sed->page_cache); ed_flags = le32toh(sed->ed_flags); ed_headp = le32toh(sed->ed_headp); kprintf("ED(%p) at 0x%08x: addr=%d endpt=%d maxp=%d flags=%s%s%s%s%s\n" "tailp=0x%08x headflags=%s%s headp=0x%08x nexted=0x%08x\n", sed, le32toh(sed->ed_self), OHCI_ED_GET_FA(ed_flags), OHCI_ED_GET_EN(ed_flags), OHCI_ED_GET_MAXP(ed_flags), (ed_flags & OHCI_ED_DIR_OUT) ? "-OUT" : "", (ed_flags & OHCI_ED_DIR_IN) ? "-IN" : "", (ed_flags & OHCI_ED_SPEED) ? "-LOWSPEED" : "", (ed_flags & OHCI_ED_SKIP) ? "-SKIP" : "", (ed_flags & OHCI_ED_FORMAT_ISO) ? "-ISO" : "", le32toh(sed->ed_tailp), (ed_headp & OHCI_HALTED) ? "-HALTED" : "", (ed_headp & OHCI_TOGGLECARRY) ? "-CARRY" : "", le32toh(sed->ed_headp), le32toh(sed->ed_next)); } #endif static void ohci_transfer_intr_enqueue(struct usb_xfer *xfer) { /* check for early completion */ if (ohci_check_transfer(xfer)) { return; } /* put transfer on interrupt queue */ usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer); /* start timeout, if any */ if (xfer->timeout != 0) { usbd_transfer_timeout_ms(xfer, &ohci_timeout, xfer->timeout); } } #define OHCI_APPEND_QH(sed,last) (last) = _ohci_append_qh(sed,last) static ohci_ed_t * _ohci_append_qh(ohci_ed_t *sed, ohci_ed_t *last) { DPRINTFN(11, "%p to %p\n", sed, last); if (sed->prev != NULL) { /* should not happen */ DPRINTFN(0, "ED already linked!\n"); return (last); } /* (sc->sc_bus.bus_lock) must be locked */ sed->next = last->next; sed->ed_next = last->ed_next; sed->ed_tailp = 0; sed->prev = last; usb_pc_cpu_flush(sed->page_cache); /* * the last->next->prev is never followed: sed->next->prev = sed; */ last->next = sed; last->ed_next = sed->ed_self; usb_pc_cpu_flush(last->page_cache); return (sed); } #define OHCI_REMOVE_QH(sed,last) (last) = _ohci_remove_qh(sed,last) static ohci_ed_t * _ohci_remove_qh(ohci_ed_t *sed, ohci_ed_t *last) { DPRINTFN(11, "%p from %p\n", sed, last); /* (sc->sc_bus.bus_lock) must be locked */ /* only remove if not removed from a queue */ if (sed->prev) { sed->prev->next = sed->next; sed->prev->ed_next = sed->ed_next; usb_pc_cpu_flush(sed->prev->page_cache); if (sed->next) { sed->next->prev = sed->prev; usb_pc_cpu_flush(sed->next->page_cache); } last = ((last == sed) ? sed->prev : last); sed->prev = 0; usb_pc_cpu_flush(sed->page_cache); } return (last); } static void ohci_isoc_done(struct usb_xfer *xfer) { uint8_t nframes; uint32_t *plen = xfer->frlengths; volatile uint16_t *olen; uint16_t len = 0; ohci_itd_t *td = xfer->td_transfer_first; while (1) { if (td == NULL) { panic("%s:%d: out of TD's\n", __func__, __LINE__); } #ifdef USB_DEBUG if (ohcidebug > 5) { DPRINTF("isoc TD\n"); ohci_dump_itd(td); } #endif usb_pc_cpu_invalidate(td->page_cache); nframes = td->frames; olen = &td->itd_offset[0]; if (nframes > 8) { nframes = 8; } while (nframes--) { len = le16toh(*olen); if ((len >> 12) == OHCI_CC_NOT_ACCESSED) { len = 0; } else { len &= ((1 << 12) - 1); } if (len > *plen) { len = 0;/* invalid length */ } *plen = len; plen++; olen++; } if (((void *)td) == xfer->td_transfer_last) { break; } td = td->obj_next; } xfer->aframes = xfer->nframes; ohci_device_done(xfer, USB_ERR_NORMAL_COMPLETION); } #ifdef USB_DEBUG static const char *const ohci_cc_strs[] = { "NO_ERROR", "CRC", "BIT_STUFFING", "DATA_TOGGLE_MISMATCH", "STALL", "DEVICE_NOT_RESPONDING", "PID_CHECK_FAILURE", "UNEXPECTED_PID", "DATA_OVERRUN", "DATA_UNDERRUN", "BUFFER_OVERRUN", "BUFFER_UNDERRUN", "reserved", "reserved", "NOT_ACCESSED", "NOT_ACCESSED" }; #endif static usb_error_t ohci_non_isoc_done_sub(struct usb_xfer *xfer) { ohci_td_t *td; ohci_td_t *td_alt_next; uint32_t temp; uint32_t phy_start; uint32_t phy_end; uint32_t td_flags; uint16_t cc; td = xfer->td_transfer_cache; td_alt_next = td->alt_next; td_flags = 0; if (xfer->aframes != xfer->nframes) { usbd_xfer_set_frame_len(xfer, xfer->aframes, 0); } while (1) { usb_pc_cpu_invalidate(td->page_cache); phy_start = le32toh(td->td_cbp); td_flags = le32toh(td->td_flags); cc = OHCI_TD_GET_CC(td_flags); if (phy_start) { /* * short transfer - compute the number of remaining * bytes in the hardware buffer: */ phy_end = le32toh(td->td_be); temp = (OHCI_PAGE(phy_start ^ phy_end) ? (OHCI_PAGE_SIZE + 1) : 0x0001); temp += OHCI_PAGE_OFFSET(phy_end); temp -= OHCI_PAGE_OFFSET(phy_start); if (temp > td->len) { /* guard against corruption */ cc = OHCI_CC_STALL; } else if (xfer->aframes != xfer->nframes) { /* * Sum up total transfer length * in "frlengths[]": */ xfer->frlengths[xfer->aframes] += td->len - temp; } } else { if (xfer->aframes != xfer->nframes) { /* transfer was complete */ xfer->frlengths[xfer->aframes] += td->len; } } /* Check for last transfer */ if (((void *)td) == xfer->td_transfer_last) { td = NULL; break; } /* Check transfer status */ if (cc) { /* the transfer is finished */ td = NULL; break; } /* Check for short transfer */ if (phy_start) { if (xfer->flags_int.short_frames_ok) { /* follow alt next */ td = td->alt_next; } else { /* the transfer is finished */ td = NULL; } break; } td = td->obj_next; if (td->alt_next != td_alt_next) { /* this USB frame is complete */ break; } } /* update transfer cache */ xfer->td_transfer_cache = td; DPRINTFN(16, "error cc=%d (%s)\n", cc, ohci_cc_strs[cc]); return ((cc == 0) ? USB_ERR_NORMAL_COMPLETION : (cc == OHCI_CC_STALL) ? USB_ERR_STALLED : USB_ERR_IOERROR); } static void ohci_non_isoc_done(struct usb_xfer *xfer) { usb_error_t err = 0; DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n", xfer, xfer->endpoint); #ifdef USB_DEBUG if (ohcidebug > 10) { ohci_dump_tds(xfer->td_transfer_first); } #endif /* reset scanner */ xfer->td_transfer_cache = xfer->td_transfer_first; if (xfer->flags_int.control_xfr) { if (xfer->flags_int.control_hdr) { err = ohci_non_isoc_done_sub(xfer); } xfer->aframes = 1; if (xfer->td_transfer_cache == NULL) { goto done; } } while (xfer->aframes != xfer->nframes) { err = ohci_non_isoc_done_sub(xfer); xfer->aframes++; if (xfer->td_transfer_cache == NULL) { goto done; } } if (xfer->flags_int.control_xfr && !xfer->flags_int.control_act) { err = ohci_non_isoc_done_sub(xfer); } done: ohci_device_done(xfer, err); } /*------------------------------------------------------------------------* * ohci_check_transfer_sub *------------------------------------------------------------------------*/ static void ohci_check_transfer_sub(struct usb_xfer *xfer) { ohci_td_t *td; ohci_ed_t *ed; uint32_t phy_start; uint32_t td_flags; uint32_t td_next; uint16_t cc; td = xfer->td_transfer_cache; while (1) { usb_pc_cpu_invalidate(td->page_cache); phy_start = le32toh(td->td_cbp); td_flags = le32toh(td->td_flags); td_next = le32toh(td->td_next); /* Check for last transfer */ if (((void *)td) == xfer->td_transfer_last) { /* the transfer is finished */ td = NULL; break; } /* Check transfer status */ cc = OHCI_TD_GET_CC(td_flags); if (cc) { /* the transfer is finished */ td = NULL; break; } /* * Check if we reached the last packet * or if there is a short packet: */ if (((td_next & (~0xF)) == OHCI_TD_NEXT_END) || phy_start) { /* follow alt next */ td = td->alt_next; break; } td = td->obj_next; } /* update transfer cache */ xfer->td_transfer_cache = td; if (td) { ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; ed->ed_headp = td->td_self; usb_pc_cpu_flush(ed->page_cache); DPRINTFN(13, "xfer=%p following alt next\n", xfer); /* * Make sure that the OHCI re-scans the schedule by * writing the BLF and CLF bits: */ if (xfer->xroot->udev->flags.self_suspended) { /* nothing to do */ } else if (xfer->endpoint->methods == &ohci_device_bulk_methods) { ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); } else if (xfer->endpoint->methods == &ohci_device_ctrl_methods) { ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); } } } /*------------------------------------------------------------------------* * ohci_check_transfer * * Return values: * 0: USB transfer is not finished * Else: USB transfer is finished *------------------------------------------------------------------------*/ static uint8_t ohci_check_transfer(struct usb_xfer *xfer) { ohci_ed_t *ed; uint32_t ed_headp; uint32_t ed_tailp; DPRINTFN(13, "xfer=%p checking transfer\n", xfer); ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; usb_pc_cpu_invalidate(ed->page_cache); ed_headp = le32toh(ed->ed_headp); ed_tailp = le32toh(ed->ed_tailp); if ((ed_headp & OHCI_HALTED) || (((ed_headp ^ ed_tailp) & (~0xF)) == 0)) { if (xfer->endpoint->methods == &ohci_device_isoc_methods) { /* isochronous transfer */ ohci_isoc_done(xfer); } else { if (xfer->flags_int.short_frames_ok) { ohci_check_transfer_sub(xfer); if (xfer->td_transfer_cache) { /* not finished yet */ return (0); } } /* store data-toggle */ if (ed_headp & OHCI_TOGGLECARRY) { xfer->endpoint->toggle_next = 1; } else { xfer->endpoint->toggle_next = 0; } /* non-isochronous transfer */ ohci_non_isoc_done(xfer); } return (1); } DPRINTFN(13, "xfer=%p is still active\n", xfer); return (0); } static void ohci_rhsc_enable(ohci_softc_t *sc) { DPRINTFN(5, "\n"); USB_BUS_LOCK_ASSERT(&sc->sc_bus); sc->sc_eintrs |= OHCI_RHSC; OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_RHSC); /* acknowledge any RHSC interrupt */ OWRITE4(sc, OHCI_INTERRUPT_STATUS, OHCI_RHSC); ohci_root_intr(sc); } static void ohci_interrupt_poll(ohci_softc_t *sc) { struct usb_xfer *xfer; repeat: TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { /* * check if transfer is transferred */ if (ohci_check_transfer(xfer)) { /* queue has been modified */ goto repeat; } } } /*------------------------------------------------------------------------* * ohci_interrupt - OHCI interrupt handler * * NOTE: Do not access "sc->sc_bus.bdev" inside the interrupt handler, * hence the interrupt handler will be setup before "sc->sc_bus.bdev" * is present ! *------------------------------------------------------------------------*/ void ohci_interrupt(ohci_softc_t *sc) { struct ohci_hcca *hcca; uint32_t status; uint32_t done; USB_BUS_LOCK(&sc->sc_bus); hcca = ohci_get_hcca(sc); DPRINTFN(16, "real interrupt\n"); #ifdef USB_DEBUG if (ohcidebug > 15) { ohci_dumpregs(sc); } #endif done = le32toh(hcca->hcca_done_head); /* * The LSb of done is used to inform the HC Driver that an interrupt * condition exists for both the Done list and for another event * recorded in HcInterruptStatus. On an interrupt from the HC, the * HC Driver checks the HccaDoneHead Value. If this value is 0, then * the interrupt was caused by other than the HccaDoneHead update * and the HcInterruptStatus register needs to be accessed to * determine that exact interrupt cause. If HccaDoneHead is nonzero, * then a Done list update interrupt is indicated and if the LSb of * done is nonzero, then an additional interrupt event is indicated * and HcInterruptStatus should be checked to determine its cause. */ if (done != 0) { status = 0; if (done & ~OHCI_DONE_INTRS) { status |= OHCI_WDH; } if (done & OHCI_DONE_INTRS) { status |= OREAD4(sc, OHCI_INTERRUPT_STATUS); } hcca->hcca_done_head = 0; usb_pc_cpu_flush(&sc->sc_hw.hcca_pc); } else { status = OREAD4(sc, OHCI_INTERRUPT_STATUS) & ~OHCI_WDH; } status &= ~OHCI_MIE; if (status == 0) { /* * nothing to be done (PCI shared * interrupt) */ goto done; } OWRITE4(sc, OHCI_INTERRUPT_STATUS, status); /* Acknowledge */ status &= sc->sc_eintrs; if (status == 0) { goto done; } if (status & (OHCI_SO | OHCI_RD | OHCI_UE | OHCI_RHSC)) { #if 0 if (status & OHCI_SO) { /* XXX do what */ } #endif if (status & OHCI_RD) { kprintf("%s: resume detect\n", __func__); /* XXX process resume detect */ } if (status & OHCI_UE) { kprintf("%s: unrecoverable error, " "controller halted\n", __func__); OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); /* XXX what else */ } if (status & OHCI_RHSC) { /* * Disable RHSC interrupt for now, because it will be * on until the port has been reset. */ sc->sc_eintrs &= ~OHCI_RHSC; OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_RHSC); ohci_root_intr(sc); /* do not allow RHSC interrupts > 1 per second */ usb_callout_reset(&sc->sc_tmo_rhsc, hz, (void *)&ohci_rhsc_enable, sc); } } status &= ~(OHCI_RHSC | OHCI_WDH | OHCI_SO); if (status != 0) { /* Block unprocessed interrupts. XXX */ OWRITE4(sc, OHCI_INTERRUPT_DISABLE, status); sc->sc_eintrs &= ~status; kprintf("%s: blocking intrs 0x%x\n", __func__, status); } /* poll all the USB transfers */ ohci_interrupt_poll(sc); done: USB_BUS_UNLOCK(&sc->sc_bus); } /* * called when a request does not complete */ static void ohci_timeout(void *arg) { struct usb_xfer *xfer = arg; DPRINTF("xfer=%p\n", xfer); USB_BUS_LOCK_ASSERT(xfer->xroot->bus); /* transfer is transferred */ ohci_device_done(xfer, USB_ERR_TIMEOUT); } static void ohci_do_poll(struct usb_bus *bus) { struct ohci_softc *sc = OHCI_BUS2SC(bus); USB_BUS_LOCK(&sc->sc_bus); ohci_interrupt_poll(sc); USB_BUS_UNLOCK(&sc->sc_bus); } static void ohci_setup_standard_chain_sub(struct ohci_std_temp *temp) { struct usb_page_search buf_res; ohci_td_t *td; ohci_td_t *td_next; ohci_td_t *td_alt_next; uint32_t buf_offset; uint32_t average; uint32_t len_old; uint8_t shortpkt_old; uint8_t precompute; td_alt_next = NULL; buf_offset = 0; shortpkt_old = temp->shortpkt; len_old = temp->len; precompute = 1; /* software is used to detect short incoming transfers */ if ((temp->td_flags & htole32(OHCI_TD_DP_MASK)) == htole32(OHCI_TD_IN)) { temp->td_flags |= htole32(OHCI_TD_R); } else { temp->td_flags &= ~htole32(OHCI_TD_R); } restart: td = temp->td; td_next = temp->td_next; while (1) { if (temp->len == 0) { if (temp->shortpkt) { break; } /* send a Zero Length Packet, ZLP, last */ temp->shortpkt = 1; average = 0; } else { average = temp->average; if (temp->len < average) { if (temp->len % temp->max_frame_size) { temp->shortpkt = 1; } average = temp->len; } } if (td_next == NULL) { panic("%s: out of OHCI transfer descriptors!", __func__); } /* get next TD */ td = td_next; td_next = td->obj_next; /* check if we are pre-computing */ if (precompute) { /* update remaining length */ temp->len -= average; continue; } /* fill out current TD */ td->td_flags = temp->td_flags; /* the next TD uses TOGGLE_CARRY */ temp->td_flags &= ~htole32(OHCI_TD_TOGGLE_MASK); if (average == 0) { /* * The buffer start and end phys addresses should be * 0x0 for a zero length packet. */ td->td_cbp = 0; td->td_be = 0; td->len = 0; } else { usbd_get_page(temp->pc, buf_offset, &buf_res); td->td_cbp = htole32(buf_res.physaddr); buf_offset += (average - 1); usbd_get_page(temp->pc, buf_offset, &buf_res); td->td_be = htole32(buf_res.physaddr); buf_offset++; td->len = average; /* update remaining length */ temp->len -= average; } if ((td_next == td_alt_next) && temp->setup_alt_next) { /* we need to receive these frames one by one ! */ td->td_flags &= htole32(~OHCI_TD_INTR_MASK); td->td_flags |= htole32(OHCI_TD_SET_DI(1)); td->td_next = htole32(OHCI_TD_NEXT_END); } else { if (td_next) { /* link the current TD with the next one */ td->td_next = td_next->td_self; } } td->alt_next = td_alt_next; usb_pc_cpu_flush(td->page_cache); } if (precompute) { precompute = 0; /* setup alt next pointer, if any */ if (temp->last_frame) { /* no alternate next */ td_alt_next = NULL; } else { /* we use this field internally */ td_alt_next = td_next; } /* restore */ temp->shortpkt = shortpkt_old; temp->len = len_old; goto restart; } temp->td = td; temp->td_next = td_next; } static void ohci_setup_standard_chain(struct usb_xfer *xfer, ohci_ed_t **ed_last) { struct ohci_std_temp temp; const struct usb_pipe_methods *methods; ohci_ed_t *ed; ohci_td_t *td; uint32_t ed_flags; uint32_t x; DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n", xfer->address, UE_GET_ADDR(xfer->endpointno), xfer->sumlen, usbd_get_speed(xfer->xroot->udev)); temp.average = xfer->max_hc_frame_size; temp.max_frame_size = xfer->max_frame_size; /* toggle the DMA set we are using */ xfer->flags_int.curr_dma_set ^= 1; /* get next DMA set */ td = xfer->td_start[xfer->flags_int.curr_dma_set]; xfer->td_transfer_first = td; xfer->td_transfer_cache = td; temp.td = NULL; temp.td_next = td; temp.last_frame = 0; temp.setup_alt_next = xfer->flags_int.short_frames_ok; methods = xfer->endpoint->methods; /* check if we should prepend a setup message */ if (xfer->flags_int.control_xfr) { if (xfer->flags_int.control_hdr) { temp.td_flags = htole32(OHCI_TD_SETUP | OHCI_TD_NOCC | OHCI_TD_TOGGLE_0 | OHCI_TD_NOINTR); temp.len = xfer->frlengths[0]; temp.pc = xfer->frbuffers + 0; temp.shortpkt = temp.len ? 1 : 0; /* check for last frame */ if (xfer->nframes == 1) { /* no STATUS stage yet, SETUP is last */ if (xfer->flags_int.control_act) { temp.last_frame = 1; temp.setup_alt_next = 0; } } ohci_setup_standard_chain_sub(&temp); /* * XXX assume that the setup message is * contained within one USB packet: */ xfer->endpoint->toggle_next = 1; } x = 1; } else { x = 0; } temp.td_flags = htole32(OHCI_TD_NOCC | OHCI_TD_NOINTR); /* set data toggle */ if (xfer->endpoint->toggle_next) { temp.td_flags |= htole32(OHCI_TD_TOGGLE_1); } else { temp.td_flags |= htole32(OHCI_TD_TOGGLE_0); } /* set endpoint direction */ if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) { temp.td_flags |= htole32(OHCI_TD_IN); } else { temp.td_flags |= htole32(OHCI_TD_OUT); } while (x != xfer->nframes) { /* DATA0 / DATA1 message */ temp.len = xfer->frlengths[x]; temp.pc = xfer->frbuffers + x; x++; if (x == xfer->nframes) { if (xfer->flags_int.control_xfr) { /* no STATUS stage yet, DATA is last */ if (xfer->flags_int.control_act) { temp.last_frame = 1; temp.setup_alt_next = 0; } } else { temp.last_frame = 1; temp.setup_alt_next = 0; } } if (temp.len == 0) { /* make sure that we send an USB packet */ temp.shortpkt = 0; } else { /* regular data transfer */ temp.shortpkt = (xfer->flags.force_short_xfer) ? 0 : 1; } ohci_setup_standard_chain_sub(&temp); } /* check if we should append a status stage */ if (xfer->flags_int.control_xfr && !xfer->flags_int.control_act) { /* * Send a DATA1 message and invert the current endpoint * direction. */ /* set endpoint direction and data toggle */ if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) { temp.td_flags = htole32(OHCI_TD_OUT | OHCI_TD_NOCC | OHCI_TD_TOGGLE_1 | OHCI_TD_SET_DI(1)); } else { temp.td_flags = htole32(OHCI_TD_IN | OHCI_TD_NOCC | OHCI_TD_TOGGLE_1 | OHCI_TD_SET_DI(1)); } temp.len = 0; temp.pc = NULL; temp.shortpkt = 0; temp.last_frame = 1; temp.setup_alt_next = 0; ohci_setup_standard_chain_sub(&temp); } td = temp.td; /* Ensure that last TD is terminating: */ td->td_next = htole32(OHCI_TD_NEXT_END); td->td_flags &= ~htole32(OHCI_TD_INTR_MASK); td->td_flags |= htole32(OHCI_TD_SET_DI(1)); usb_pc_cpu_flush(td->page_cache); /* must have at least one frame! */ xfer->td_transfer_last = td; #ifdef USB_DEBUG if (ohcidebug > 8) { DPRINTF("nexttog=%d; data before transfer:\n", xfer->endpoint->toggle_next); ohci_dump_tds(xfer->td_transfer_first); } #endif ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; ed_flags = (OHCI_ED_SET_FA(xfer->address) | OHCI_ED_SET_EN(UE_GET_ADDR(xfer->endpointno)) | OHCI_ED_SET_MAXP(xfer->max_frame_size)); ed_flags |= (OHCI_ED_FORMAT_GEN | OHCI_ED_DIR_TD); if (xfer->xroot->udev->speed == USB_SPEED_LOW) { ed_flags |= OHCI_ED_SPEED; } ed->ed_flags = htole32(ed_flags); td = xfer->td_transfer_first; ed->ed_headp = td->td_self; if (xfer->xroot->udev->flags.self_suspended == 0) { /* the append function will flush the endpoint descriptor */ OHCI_APPEND_QH(ed, *ed_last); if (methods == &ohci_device_bulk_methods) { ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); } if (methods == &ohci_device_ctrl_methods) { ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); } } else { usb_pc_cpu_flush(ed->page_cache); } } static void ohci_root_intr(ohci_softc_t *sc) { uint32_t hstatus; uint16_t i; uint16_t m; USB_BUS_LOCK_ASSERT(&sc->sc_bus); /* clear any old interrupt data */ memset(sc->sc_hub_idata, 0, sizeof(sc->sc_hub_idata)); hstatus = OREAD4(sc, OHCI_RH_STATUS); DPRINTF("sc=%p hstatus=0x%08x\n", sc, hstatus); /* set bits */ m = (sc->sc_noport + 1); if (m > (8 * sizeof(sc->sc_hub_idata))) { m = (8 * sizeof(sc->sc_hub_idata)); } for (i = 1; i < m; i++) { /* pick out CHANGE bits from the status register */ if (OREAD4(sc, OHCI_RH_PORT_STATUS(i)) >> 16) { sc->sc_hub_idata[i / 8] |= 1 << (i % 8); DPRINTF("port %d changed\n", i); } } uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata, sizeof(sc->sc_hub_idata)); } /* NOTE: "done" can be run two times in a row, * from close and from interrupt */ static void ohci_device_done(struct usb_xfer *xfer, usb_error_t error) { const struct usb_pipe_methods *methods = xfer->endpoint->methods; ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); ohci_ed_t *ed; USB_BUS_LOCK_ASSERT(&sc->sc_bus); DPRINTFN(2, "xfer=%p, endpoint=%p, error=%d\n", xfer, xfer->endpoint, error); ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; if (ed) { usb_pc_cpu_invalidate(ed->page_cache); } if (methods == &ohci_device_bulk_methods) { OHCI_REMOVE_QH(ed, sc->sc_bulk_p_last); } if (methods == &ohci_device_ctrl_methods) { OHCI_REMOVE_QH(ed, sc->sc_ctrl_p_last); } if (methods == &ohci_device_intr_methods) { OHCI_REMOVE_QH(ed, sc->sc_intr_p_last[xfer->qh_pos]); } if (methods == &ohci_device_isoc_methods) { OHCI_REMOVE_QH(ed, sc->sc_isoc_p_last); } xfer->td_transfer_first = NULL; xfer->td_transfer_last = NULL; /* dequeue transfer and start next transfer */ usbd_transfer_done(xfer, error); } /*------------------------------------------------------------------------* * ohci bulk support *------------------------------------------------------------------------*/ static void ohci_device_bulk_open(struct usb_xfer *xfer) { return; } static void ohci_device_bulk_close(struct usb_xfer *xfer) { ohci_device_done(xfer, USB_ERR_CANCELLED); } static void ohci_device_bulk_enter(struct usb_xfer *xfer) { return; } static void ohci_device_bulk_start(struct usb_xfer *xfer) { ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); /* setup TD's and QH */ ohci_setup_standard_chain(xfer, &sc->sc_bulk_p_last); /* put transfer on interrupt queue */ ohci_transfer_intr_enqueue(xfer); } static const struct usb_pipe_methods ohci_device_bulk_methods = { .open = ohci_device_bulk_open, .close = ohci_device_bulk_close, .enter = ohci_device_bulk_enter, .start = ohci_device_bulk_start, }; /*------------------------------------------------------------------------* * ohci control support *------------------------------------------------------------------------*/ static void ohci_device_ctrl_open(struct usb_xfer *xfer) { return; } static void ohci_device_ctrl_close(struct usb_xfer *xfer) { ohci_device_done(xfer, USB_ERR_CANCELLED); } static void ohci_device_ctrl_enter(struct usb_xfer *xfer) { return; } static void ohci_device_ctrl_start(struct usb_xfer *xfer) { ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); /* setup TD's and QH */ ohci_setup_standard_chain(xfer, &sc->sc_ctrl_p_last); /* put transfer on interrupt queue */ ohci_transfer_intr_enqueue(xfer); } static const struct usb_pipe_methods ohci_device_ctrl_methods = { .open = ohci_device_ctrl_open, .close = ohci_device_ctrl_close, .enter = ohci_device_ctrl_enter, .start = ohci_device_ctrl_start, }; /*------------------------------------------------------------------------* * ohci interrupt support *------------------------------------------------------------------------*/ static void ohci_device_intr_open(struct usb_xfer *xfer) { ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); uint16_t best; uint16_t bit; uint16_t x; best = 0; bit = OHCI_NO_EDS / 2; while (bit) { if (xfer->interval >= bit) { x = bit; best = bit; while (x & bit) { if (sc->sc_intr_stat[x] < sc->sc_intr_stat[best]) { best = x; } x++; } break; } bit >>= 1; } sc->sc_intr_stat[best]++; xfer->qh_pos = best; DPRINTFN(3, "best=%d interval=%d\n", best, xfer->interval); } static void ohci_device_intr_close(struct usb_xfer *xfer) { ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); sc->sc_intr_stat[xfer->qh_pos]--; ohci_device_done(xfer, USB_ERR_CANCELLED); } static void ohci_device_intr_enter(struct usb_xfer *xfer) { return; } static void ohci_device_intr_start(struct usb_xfer *xfer) { ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); /* setup TD's and QH */ ohci_setup_standard_chain(xfer, &sc->sc_intr_p_last[xfer->qh_pos]); /* put transfer on interrupt queue */ ohci_transfer_intr_enqueue(xfer); } static const struct usb_pipe_methods ohci_device_intr_methods = { .open = ohci_device_intr_open, .close = ohci_device_intr_close, .enter = ohci_device_intr_enter, .start = ohci_device_intr_start, }; /*------------------------------------------------------------------------* * ohci isochronous support *------------------------------------------------------------------------*/ static void ohci_device_isoc_open(struct usb_xfer *xfer) { return; } static void ohci_device_isoc_close(struct usb_xfer *xfer) { /**/ ohci_device_done(xfer, USB_ERR_CANCELLED); } static void ohci_device_isoc_enter(struct usb_xfer *xfer) { struct usb_page_search buf_res; ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); struct ohci_hcca *hcca; uint32_t buf_offset; uint32_t nframes; uint32_t ed_flags; uint32_t *plen; uint16_t itd_offset[OHCI_ITD_NOFFSET]; uint16_t length; uint8_t ncur; ohci_itd_t *td; ohci_itd_t *td_last = NULL; ohci_ed_t *ed; hcca = ohci_get_hcca(sc); nframes = le32toh(hcca->hcca_frame_number); DPRINTFN(6, "xfer=%p isoc_next=%u nframes=%u hcca_fn=%u\n", xfer, xfer->endpoint->isoc_next, xfer->nframes, nframes); if ((xfer->endpoint->is_synced == 0) || (((nframes - xfer->endpoint->isoc_next) & 0xFFFF) < xfer->nframes) || (((xfer->endpoint->isoc_next - nframes) & 0xFFFF) >= 128)) { /* * If there is data underflow or the pipe queue is empty we * schedule the transfer a few frames ahead of the current * frame position. Else two isochronous transfers might * overlap. */ xfer->endpoint->isoc_next = (nframes + 3) & 0xFFFF; xfer->endpoint->is_synced = 1; DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next); } /* * compute how many milliseconds the insertion is ahead of the * current frame position: */ buf_offset = ((xfer->endpoint->isoc_next - nframes) & 0xFFFF); /* * pre-compute when the isochronous transfer will be finished: */ xfer->isoc_time_complete = (usb_isoc_time_expand(&sc->sc_bus, nframes) + buf_offset + xfer->nframes); /* get the real number of frames */ nframes = xfer->nframes; buf_offset = 0; plen = xfer->frlengths; /* toggle the DMA set we are using */ xfer->flags_int.curr_dma_set ^= 1; /* get next DMA set */ td = xfer->td_start[xfer->flags_int.curr_dma_set]; xfer->td_transfer_first = td; ncur = 0; length = 0; while (nframes--) { if (td == NULL) { panic("%s:%d: out of TD's\n", __func__, __LINE__); } itd_offset[ncur] = length; buf_offset += *plen; length += *plen; plen++; ncur++; if ( /* check if the ITD is full */ (ncur == OHCI_ITD_NOFFSET) || /* check if we have put more than 4K into the ITD */ (length & 0xF000) || /* check if it is the last frame */ (nframes == 0)) { /* fill current ITD */ td->itd_flags = htole32( OHCI_ITD_NOCC | OHCI_ITD_SET_SF(xfer->endpoint->isoc_next) | OHCI_ITD_NOINTR | OHCI_ITD_SET_FC(ncur)); td->frames = ncur; xfer->endpoint->isoc_next += ncur; if (length == 0) { /* all zero */ td->itd_bp0 = 0; td->itd_be = ~0; while (ncur--) { td->itd_offset[ncur] = htole16(OHCI_ITD_MK_OFFS(0)); } } else { usbd_get_page(xfer->frbuffers, buf_offset - length, &buf_res); length = OHCI_PAGE_MASK(buf_res.physaddr); buf_res.physaddr = OHCI_PAGE(buf_res.physaddr); td->itd_bp0 = htole32(buf_res.physaddr); usbd_get_page(xfer->frbuffers, buf_offset - 1, &buf_res); td->itd_be = htole32(buf_res.physaddr); while (ncur--) { itd_offset[ncur] += length; itd_offset[ncur] = OHCI_ITD_MK_OFFS(itd_offset[ncur]); td->itd_offset[ncur] = htole16(itd_offset[ncur]); } } ncur = 0; length = 0; td_last = td; td = td->obj_next; if (td) { /* link the last TD with the next one */ td_last->itd_next = td->itd_self; } usb_pc_cpu_flush(td_last->page_cache); } } /* update the last TD */ td_last->itd_flags &= ~htole32(OHCI_ITD_NOINTR); td_last->itd_flags |= htole32(OHCI_ITD_SET_DI(0)); td_last->itd_next = 0; usb_pc_cpu_flush(td_last->page_cache); xfer->td_transfer_last = td_last; #ifdef USB_DEBUG if (ohcidebug > 8) { DPRINTF("data before transfer:\n"); ohci_dump_itds(xfer->td_transfer_first); } #endif ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) ed_flags = (OHCI_ED_DIR_IN | OHCI_ED_FORMAT_ISO); else ed_flags = (OHCI_ED_DIR_OUT | OHCI_ED_FORMAT_ISO); ed_flags |= (OHCI_ED_SET_FA(xfer->address) | OHCI_ED_SET_EN(UE_GET_ADDR(xfer->endpointno)) | OHCI_ED_SET_MAXP(xfer->max_frame_size)); if (xfer->xroot->udev->speed == USB_SPEED_LOW) { ed_flags |= OHCI_ED_SPEED; } ed->ed_flags = htole32(ed_flags); td = xfer->td_transfer_first; ed->ed_headp = td->itd_self; /* isochronous transfers are not affected by suspend / resume */ /* the append function will flush the endpoint descriptor */ OHCI_APPEND_QH(ed, sc->sc_isoc_p_last); } static void ohci_device_isoc_start(struct usb_xfer *xfer) { /* put transfer on interrupt queue */ ohci_transfer_intr_enqueue(xfer); } static const struct usb_pipe_methods ohci_device_isoc_methods = { .open = ohci_device_isoc_open, .close = ohci_device_isoc_close, .enter = ohci_device_isoc_enter, .start = ohci_device_isoc_start, }; /*------------------------------------------------------------------------* * ohci root control support *------------------------------------------------------------------------* * Simulate a hardware hub by handling all the necessary requests. *------------------------------------------------------------------------*/ static const struct usb_device_descriptor ohci_devd = { sizeof(struct usb_device_descriptor), UDESC_DEVICE, /* type */ {0x00, 0x01}, /* USB version */ UDCLASS_HUB, /* class */ UDSUBCLASS_HUB, /* subclass */ UDPROTO_FSHUB, /* protocol */ 64, /* max packet */ {0}, {0}, {0x00, 0x01}, /* device id */ 1, 2, 0, /* string indicies */ 1 /* # of configurations */ }; static const struct ohci_config_desc ohci_confd = { .confd = { .bLength = sizeof(struct usb_config_descriptor), .bDescriptorType = UDESC_CONFIG, .wTotalLength[0] = sizeof(ohci_confd), .bNumInterface = 1, .bConfigurationValue = 1, .iConfiguration = 0, .bmAttributes = UC_SELF_POWERED, .bMaxPower = 0, /* max power */ }, .ifcd = { .bLength = sizeof(struct usb_interface_descriptor), .bDescriptorType = UDESC_INTERFACE, .bNumEndpoints = 1, .bInterfaceClass = UICLASS_HUB, .bInterfaceSubClass = UISUBCLASS_HUB, .bInterfaceProtocol = 0, }, .endpd = { .bLength = sizeof(struct usb_endpoint_descriptor), .bDescriptorType = UDESC_ENDPOINT, .bEndpointAddress = UE_DIR_IN | OHCI_INTR_ENDPT, .bmAttributes = UE_INTERRUPT, .wMaxPacketSize[0] = 32,/* max packet (255 ports) */ .bInterval = 255, }, }; static const struct usb_hub_descriptor ohci_hubd = { .bDescLength = 0, /* dynamic length */ .bDescriptorType = UDESC_HUB, }; static usb_error_t ohci_roothub_exec(struct usb_device *udev, struct usb_device_request *req, const void **pptr, uint16_t *plength) { ohci_softc_t *sc = OHCI_BUS2SC(udev->bus); const void *ptr; const char *str_ptr; uint32_t port; uint32_t v; uint16_t len; uint16_t value; uint16_t index; uint8_t l; usb_error_t err; USB_BUS_LOCK_ASSERT(&sc->sc_bus); /* buffer reset */ ptr = (const void *)&sc->sc_hub_desc.temp; len = 0; err = 0; value = UGETW(req->wValue); index = UGETW(req->wIndex); DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x " "wValue=0x%04x wIndex=0x%04x\n", req->bmRequestType, req->bRequest, UGETW(req->wLength), value, index); #define C(x,y) ((x) | ((y) << 8)) switch (C(req->bRequest, req->bmRequestType)) { case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): /* * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops * for the integrated root hub. */ break; case C(UR_GET_CONFIG, UT_READ_DEVICE): len = 1; sc->sc_hub_desc.temp[0] = sc->sc_conf; break; case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): switch (value >> 8) { case UDESC_DEVICE: if ((value & 0xff) != 0) { err = USB_ERR_IOERROR; goto done; } len = sizeof(ohci_devd); ptr = (const void *)&ohci_devd; break; case UDESC_CONFIG: if ((value & 0xff) != 0) { err = USB_ERR_IOERROR; goto done; } len = sizeof(ohci_confd); ptr = (const void *)&ohci_confd; break; case UDESC_STRING: switch (value & 0xff) { case 0: /* Language table */ str_ptr = "\001"; break; case 1: /* Vendor */ str_ptr = sc->sc_vendor; break; case 2: /* Product */ str_ptr = "OHCI root HUB"; break; default: str_ptr = ""; break; } len = usb_make_str_desc( sc->sc_hub_desc.temp, sizeof(sc->sc_hub_desc.temp), str_ptr); break; default: err = USB_ERR_IOERROR; goto done; } break; case C(UR_GET_INTERFACE, UT_READ_INTERFACE): len = 1; sc->sc_hub_desc.temp[0] = 0; break; case C(UR_GET_STATUS, UT_READ_DEVICE): len = 2; USETW(sc->sc_hub_desc.stat.wStatus, UDS_SELF_POWERED); break; case C(UR_GET_STATUS, UT_READ_INTERFACE): case C(UR_GET_STATUS, UT_READ_ENDPOINT): len = 2; USETW(sc->sc_hub_desc.stat.wStatus, 0); break; case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): if (value >= OHCI_MAX_DEVICES) { err = USB_ERR_IOERROR; goto done; } sc->sc_addr = value; break; case C(UR_SET_CONFIG, UT_WRITE_DEVICE): if ((value != 0) && (value != 1)) { err = USB_ERR_IOERROR; goto done; } sc->sc_conf = value; break; case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): break; case C(UR_SET_FEATURE, UT_WRITE_DEVICE): case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): err = USB_ERR_IOERROR; goto done; case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): break; case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): break; /* Hub requests */ case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): break; case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): DPRINTFN(9, "UR_CLEAR_PORT_FEATURE " "port=%d feature=%d\n", index, value); if ((index < 1) || (index > sc->sc_noport)) { err = USB_ERR_IOERROR; goto done; } port = OHCI_RH_PORT_STATUS(index); switch (value) { case UHF_PORT_ENABLE: OWRITE4(sc, port, UPS_CURRENT_CONNECT_STATUS); break; case UHF_PORT_SUSPEND: OWRITE4(sc, port, UPS_OVERCURRENT_INDICATOR); break; case UHF_PORT_POWER: /* Yes, writing to the LOW_SPEED bit clears power. */ OWRITE4(sc, port, UPS_LOW_SPEED); break; case UHF_C_PORT_CONNECTION: OWRITE4(sc, port, UPS_C_CONNECT_STATUS << 16); break; case UHF_C_PORT_ENABLE: OWRITE4(sc, port, UPS_C_PORT_ENABLED << 16); break; case UHF_C_PORT_SUSPEND: OWRITE4(sc, port, UPS_C_SUSPEND << 16); break; case UHF_C_PORT_OVER_CURRENT: OWRITE4(sc, port, UPS_C_OVERCURRENT_INDICATOR << 16); break; case UHF_C_PORT_RESET: OWRITE4(sc, port, UPS_C_PORT_RESET << 16); break; default: err = USB_ERR_IOERROR; goto done; } switch (value) { case UHF_C_PORT_CONNECTION: case UHF_C_PORT_ENABLE: case UHF_C_PORT_SUSPEND: case UHF_C_PORT_OVER_CURRENT: case UHF_C_PORT_RESET: /* enable RHSC interrupt if condition is cleared. */ if ((OREAD4(sc, port) >> 16) == 0) ohci_rhsc_enable(sc); break; default: break; } break; case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): if ((value & 0xff) != 0) { err = USB_ERR_IOERROR; goto done; } v = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); sc->sc_hub_desc.hubd = ohci_hubd; sc->sc_hub_desc.hubd.bNbrPorts = sc->sc_noport; USETW(sc->sc_hub_desc.hubd.wHubCharacteristics, (v & OHCI_NPS ? UHD_PWR_NO_SWITCH : v & OHCI_PSM ? UHD_PWR_GANGED : UHD_PWR_INDIVIDUAL) /* XXX overcurrent */ ); sc->sc_hub_desc.hubd.bPwrOn2PwrGood = OHCI_GET_POTPGT(v); v = OREAD4(sc, OHCI_RH_DESCRIPTOR_B); for (l = 0; l < sc->sc_noport; l++) { if (v & 1) { sc->sc_hub_desc.hubd.DeviceRemovable[l / 8] |= (1 << (l % 8)); } v >>= 1; } sc->sc_hub_desc.hubd.bDescLength = 8 + ((sc->sc_noport + 7) / 8); len = sc->sc_hub_desc.hubd.bDescLength; break; case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): len = 16; memset(sc->sc_hub_desc.temp, 0, 16); break; case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): DPRINTFN(9, "get port status i=%d\n", index); if ((index < 1) || (index > sc->sc_noport)) { err = USB_ERR_IOERROR; goto done; } v = OREAD4(sc, OHCI_RH_PORT_STATUS(index)); DPRINTFN(9, "port status=0x%04x\n", v); v &= ~UPS_PORT_MODE_DEVICE; /* force host mode */ USETW(sc->sc_hub_desc.ps.wPortStatus, v); USETW(sc->sc_hub_desc.ps.wPortChange, v >> 16); len = sizeof(sc->sc_hub_desc.ps); break; case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): err = USB_ERR_IOERROR; goto done; case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): break; case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): if ((index < 1) || (index > sc->sc_noport)) { err = USB_ERR_IOERROR; goto done; } port = OHCI_RH_PORT_STATUS(index); switch (value) { case UHF_PORT_ENABLE: OWRITE4(sc, port, UPS_PORT_ENABLED); break; case UHF_PORT_SUSPEND: OWRITE4(sc, port, UPS_SUSPEND); break; case UHF_PORT_RESET: DPRINTFN(6, "reset port %d\n", index); OWRITE4(sc, port, UPS_RESET); for (v = 0;; v++) { if (v < 12) { usb_pause_mtx(&sc->sc_bus.bus_lock, USB_MS_TO_TICKS(usb_port_root_reset_delay)); if ((OREAD4(sc, port) & UPS_RESET) == 0) { break; } } else { err = USB_ERR_TIMEOUT; goto done; } } DPRINTFN(9, "ohci port %d reset, status = 0x%04x\n", index, OREAD4(sc, port)); break; case UHF_PORT_POWER: DPRINTFN(3, "set port power %d\n", index); OWRITE4(sc, port, UPS_PORT_POWER); break; default: err = USB_ERR_IOERROR; goto done; } break; default: err = USB_ERR_IOERROR; goto done; } done: *plength = len; *pptr = ptr; return (err); } static void ohci_xfer_setup(struct usb_setup_params *parm) { struct usb_page_search page_info; struct usb_page_cache *pc; ohci_softc_t *sc; struct usb_xfer *xfer; void *last_obj; uint32_t ntd; uint32_t nitd; uint32_t nqh; uint32_t n; sc = OHCI_BUS2SC(parm->udev->bus); xfer = parm->curr_xfer; parm->hc_max_packet_size = 0x500; parm->hc_max_packet_count = 1; parm->hc_max_frame_size = OHCI_PAGE_SIZE; /* * calculate ntd and nqh */ if (parm->methods == &ohci_device_ctrl_methods) { xfer->flags_int.bdma_enable = 1; usbd_transfer_setup_sub(parm); nitd = 0; ntd = ((2 * xfer->nframes) + 1 /* STATUS */ + (xfer->max_data_length / xfer->max_hc_frame_size)); nqh = 1; } else if (parm->methods == &ohci_device_bulk_methods) { xfer->flags_int.bdma_enable = 1; usbd_transfer_setup_sub(parm); nitd = 0; ntd = ((2 * xfer->nframes) + (xfer->max_data_length / xfer->max_hc_frame_size)); nqh = 1; } else if (parm->methods == &ohci_device_intr_methods) { xfer->flags_int.bdma_enable = 1; usbd_transfer_setup_sub(parm); nitd = 0; ntd = ((2 * xfer->nframes) + (xfer->max_data_length / xfer->max_hc_frame_size)); nqh = 1; } else if (parm->methods == &ohci_device_isoc_methods) { xfer->flags_int.bdma_enable = 1; usbd_transfer_setup_sub(parm); nitd = ((xfer->max_data_length / OHCI_PAGE_SIZE) + ((xfer->nframes + OHCI_ITD_NOFFSET - 1) / OHCI_ITD_NOFFSET) + 1 /* EXTRA */ ); ntd = 0; nqh = 1; } else { usbd_transfer_setup_sub(parm); nitd = 0; ntd = 0; nqh = 0; } alloc_dma_set: if (parm->err) { return; } last_obj = NULL; if (usbd_transfer_setup_sub_malloc( parm, &pc, sizeof(ohci_td_t), OHCI_TD_ALIGN, ntd)) { parm->err = USB_ERR_NOMEM; return; } if (parm->buf) { for (n = 0; n != ntd; n++) { ohci_td_t *td; usbd_get_page(pc + n, 0, &page_info); td = page_info.buffer; /* init TD */ td->td_self = htole32(page_info.physaddr); td->obj_next = last_obj; td->page_cache = pc + n; last_obj = td; usb_pc_cpu_flush(pc + n); } } if (usbd_transfer_setup_sub_malloc( parm, &pc, sizeof(ohci_itd_t), OHCI_ITD_ALIGN, nitd)) { parm->err = USB_ERR_NOMEM; return; } if (parm->buf) { for (n = 0; n != nitd; n++) { ohci_itd_t *itd; usbd_get_page(pc + n, 0, &page_info); itd = page_info.buffer; /* init TD */ itd->itd_self = htole32(page_info.physaddr); itd->obj_next = last_obj; itd->page_cache = pc + n; last_obj = itd; usb_pc_cpu_flush(pc + n); } } xfer->td_start[xfer->flags_int.curr_dma_set] = last_obj; last_obj = NULL; if (usbd_transfer_setup_sub_malloc( parm, &pc, sizeof(ohci_ed_t), OHCI_ED_ALIGN, nqh)) { parm->err = USB_ERR_NOMEM; return; } if (parm->buf) { for (n = 0; n != nqh; n++) { ohci_ed_t *ed; usbd_get_page(pc + n, 0, &page_info); ed = page_info.buffer; /* init QH */ ed->ed_self = htole32(page_info.physaddr); ed->obj_next = last_obj; ed->page_cache = pc + n; last_obj = ed; usb_pc_cpu_flush(pc + n); } } xfer->qh_start[xfer->flags_int.curr_dma_set] = last_obj; if (!xfer->flags_int.curr_dma_set) { xfer->flags_int.curr_dma_set = 1; goto alloc_dma_set; } } static void ohci_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc, struct usb_endpoint *ep) { ohci_softc_t *sc = OHCI_BUS2SC(udev->bus); DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d)\n", ep, udev->address, edesc->bEndpointAddress, udev->flags.usb_mode, sc->sc_addr); if (udev->device_index != sc->sc_addr) { switch (edesc->bmAttributes & UE_XFERTYPE) { case UE_CONTROL: ep->methods = &ohci_device_ctrl_methods; break; case UE_INTERRUPT: ep->methods = &ohci_device_intr_methods; break; case UE_ISOCHRONOUS: if (udev->speed == USB_SPEED_FULL) { ep->methods = &ohci_device_isoc_methods; } break; case UE_BULK: ep->methods = &ohci_device_bulk_methods; break; default: /* do nothing */ break; } } } static void ohci_xfer_unsetup(struct usb_xfer *xfer) { return; } static void ohci_get_dma_delay(struct usb_device *udev, uint32_t *pus) { /* * Wait until hardware has finished any possible use of the * transfer descriptor(s) and QH */ *pus = (1125); /* microseconds */ } static void ohci_device_resume(struct usb_device *udev) { struct ohci_softc *sc = OHCI_BUS2SC(udev->bus); struct usb_xfer *xfer; const struct usb_pipe_methods *methods; ohci_ed_t *ed; DPRINTF("\n"); USB_BUS_LOCK(udev->bus); TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { if (xfer->xroot->udev == udev) { methods = xfer->endpoint->methods; ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; if (methods == &ohci_device_bulk_methods) { OHCI_APPEND_QH(ed, sc->sc_bulk_p_last); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); } if (methods == &ohci_device_ctrl_methods) { OHCI_APPEND_QH(ed, sc->sc_ctrl_p_last); OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); } if (methods == &ohci_device_intr_methods) { OHCI_APPEND_QH(ed, sc->sc_intr_p_last[xfer->qh_pos]); } } } USB_BUS_UNLOCK(udev->bus); return; } static void ohci_device_suspend(struct usb_device *udev) { struct ohci_softc *sc = OHCI_BUS2SC(udev->bus); struct usb_xfer *xfer; const struct usb_pipe_methods *methods; ohci_ed_t *ed; DPRINTF("\n"); USB_BUS_LOCK(udev->bus); TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { if (xfer->xroot->udev == udev) { methods = xfer->endpoint->methods; ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; if (methods == &ohci_device_bulk_methods) { OHCI_REMOVE_QH(ed, sc->sc_bulk_p_last); } if (methods == &ohci_device_ctrl_methods) { OHCI_REMOVE_QH(ed, sc->sc_ctrl_p_last); } if (methods == &ohci_device_intr_methods) { OHCI_REMOVE_QH(ed, sc->sc_intr_p_last[xfer->qh_pos]); } } } USB_BUS_UNLOCK(udev->bus); return; } static void ohci_set_hw_power_sleep(struct usb_bus *bus, uint32_t state) { struct ohci_softc *sc = OHCI_BUS2SC(bus); switch (state) { case USB_HW_POWER_SUSPEND: case USB_HW_POWER_SHUTDOWN: ohci_suspend(sc); break; case USB_HW_POWER_RESUME: ohci_resume(sc); break; default: break; } } static void ohci_set_hw_power(struct usb_bus *bus) { struct ohci_softc *sc = OHCI_BUS2SC(bus); uint32_t temp; uint32_t flags; DPRINTF("\n"); USB_BUS_LOCK(bus); flags = bus->hw_power_state; temp = OREAD4(sc, OHCI_CONTROL); temp &= ~(OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE); if (flags & USB_HW_POWER_CONTROL) temp |= OHCI_CLE; if (flags & USB_HW_POWER_BULK) temp |= OHCI_BLE; if (flags & USB_HW_POWER_INTERRUPT) temp |= OHCI_PLE; if (flags & USB_HW_POWER_ISOC) temp |= OHCI_IE | OHCI_PLE; OWRITE4(sc, OHCI_CONTROL, temp); USB_BUS_UNLOCK(bus); return; } static const struct usb_bus_methods ohci_bus_methods = { .endpoint_init = ohci_ep_init, .xfer_setup = ohci_xfer_setup, .xfer_unsetup = ohci_xfer_unsetup, .get_dma_delay = ohci_get_dma_delay, .device_resume = ohci_device_resume, .device_suspend = ohci_device_suspend, .set_hw_power = ohci_set_hw_power, .set_hw_power_sleep = ohci_set_hw_power_sleep, .roothub_exec = ohci_roothub_exec, .xfer_poll = ohci_do_poll, };