Basic Installation ================== These are installation instructions for Readline-5.0. The simplest way to compile readline is: 1. `cd' to the directory containing the readline source code and type `./configure' to configure readline for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes some time. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile readline and build the static readline and history libraries. If supported, the shared readline and history libraries will be built also. See below for instructions on compiling the other parts of the distribution. Typing `make everything' will cause the static and shared libraries (if supported) and the example programs to be built. 3. Type `make install' to install the static readline and history libraries, the readline include files, the documentation, and, if supported, the shared readline and history libraries. 4. You can remove the created libraries and object files from the build directory by typing `make clean'. To also remove the files that `configure' created (so you can compile readline for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the readline developers, and should be used with care. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in the build directory, and Makefiles in the `doc', `shlib', and `examples' subdirectories. It also creates a `config.h' file containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, a file `config.cache' that saves the results of its tests to speed up reconfiguring, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). If you need to do unusual things to compile readline, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to so they can be considered for the next release. If at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.in' is used to create `configure' by a program called `autoconf'. You only need `configure.in' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The readline `configure.in' requires autoconf version 2.50 or newer. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. You can give `configure' initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this: CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure Or on systems that have the `env' program, you can do it like this: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure Compiling For Multiple Architectures ==================================== You can compile readline for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not supports the `VPATH' variable, you have to compile readline for one architecture at a time in the source code directory. After you have installed readline for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the readline libraries in `/usr/local/lib', the include files in `/usr/local/include/readline', the man pages in `/usr/local/man', and the info files in `/usr/local/info'. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH' or by supplying a value for the DESTDIR variable when running `make install'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the readline Makefiles will use PATH as the prefix for installing the libraries. Documentation and other data files will still use the regular prefix. Specifying the System Type ========================== There may be some features `configure' can not figure out automatically, but need to determine by the type of host readline will run on. Usually `configure' can figure that out, but if it prints a message saying it can not guess the host type, give it the `--host=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name with three fields: CPU-COMPANY-SYSTEM (e.g., i386-unknown-freebsd4.2). See the file `config.sub' for the possible values of each field. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: the readline `configure' looks for a site script, but not all `configure' scripts do. Operation Controls ================== `configure' recognizes the following options to control how it operates. `--cache-file=FILE' Use and save the results of the tests in FILE instead of `./config.cache'. Set FILE to `/dev/null' to disable caching, for debugging `configure'. `--help' Print a summary of the options to `configure', and exit. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--version' Print the version of Autoconf used to generate the `configure' script, and exit. `configure' also accepts some other, not widely useful, options. Optional Features ================= The readline `configure' recognizes a single `--with-PACKAGE' option: `--with-curses' This tells readline that it can find the termcap library functions (tgetent, et al.) in the curses library, rather than a separate termcap library. Readline uses the termcap functions, but does not link with the termcap or curses library itself, allowing applications which link with readline the to choose an appropriate library. This option tells readline to link the example programs with the curses library rather than libtermcap. `configure' also recognizes two `--enable-FEATURE' options: `--enable-shared' Build the shared libraries by default on supported platforms. The default is `yes'. `--enable-static' Build the static libraries by default. The default is `yes'. Shared Libraries ================ There is support for building shared versions of the readline and history libraries. The configure script creates a Makefile in the `shlib' subdirectory, and typing `make shared' will cause shared versions of the readline and history libraries to be built on supported platforms. If `configure' is given the `--enable-shared' option, it will attempt to build the shared libraries by default on supported platforms. Configure calls the script support/shobj-conf to test whether or not shared library creation is supported and to generate the values of variables that are substituted into shlib/Makefile. If you try to build shared libraries on an unsupported platform, `make' will display a message asking you to update support/shobj-conf for your platform. If you need to update support/shobj-conf, you will need to create a `stanza' for your operating system and compiler. The script uses the value of host_os and ${CC} as determined by configure. For instance, FreeBSD 4.2 with any version of gcc is identified as `freebsd4.2-gcc*'. In the stanza for your operating system-compiler pair, you will need to define several variables. They are: SHOBJ_CC The C compiler used to compile source files into shareable object files. This is normally set to the value of ${CC} by configure, and should not need to be changed. SHOBJ_CFLAGS Flags to pass to the C compiler ($SHOBJ_CC) to create position-independent code. If you are using gcc, this should probably be set to `-fpic'. SHOBJ_LD The link editor to be used to create the shared library from the object files created by $SHOBJ_CC. If you are using gcc, a value of `gcc' will probably work. SHOBJ_LDFLAGS Flags to pass to SHOBJ_LD to enable shared object creation. If you are using gcc, `-shared' may be all that is necessary. These should be the flags needed for generic shared object creation. SHLIB_XLDFLAGS Additional flags to pass to SHOBJ_LD for shared library creation. Many systems use the -R option to the link editor to embed a path within the library for run-time library searches. A reasonable value for such systems would be `-R$(libdir)'. SHLIB_LIBS Any additional libraries that shared libraries should be linked against when they are created. SHLIB_LIBSUFF The suffix to add to `libreadline' and `libhistory' when generating the filename of the shared library. Many systems use `so'; HP-UX uses `sl'. SHLIB_LIBVERSION The string to append to the filename to indicate the version of the shared library. It should begin with $(SHLIB_LIBSUFF), and possibly include version information that allows the run-time loader to load the version of the shared library appropriate for a particular program. Systems using shared libraries similar to SunOS 4.x use major and minor library version numbers; for those systems a value of `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' is appropriate. Systems based on System V Release 4 don't use minor version numbers; use `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' on those systems. Other Unix versions use different schemes. SHLIB_STATUS Set this to `supported' when you have defined the other necessary variables. Make uses this to determine whether or not shared library creation should be attempted. If shared libraries are not supported, this will be set to `unsupported'. You should look at the existing stanzas in support/shobj-conf for ideas. Once you have updated support/shobj-conf, re-run configure and type `make shared' or `make'. The shared libraries will be created in the shlib subdirectory. If shared libraries are created, `make install' will install them. You may install only the shared libraries by running `make install-shared' from the top-level build directory. Running `make install' in the shlib subdirectory will also work. If you don't want to install any created shared libraries, run `make install-static'.