/* ascreg.h - port and bit definitions for the GI-1904 interface * * Copyright (c) 1995 Gunther Schadow. All rights reserved. * Copyright (c) 1995 Luigi Rizzo. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Gunther Schadow. * and Luigi Rizzo * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * $FreeBSD: src/sys/i386/isa/ascreg.h,v 1.5 1999/08/28 00:44:37 peter Exp $ * $DragonFly: src/sys/i386/isa/Attic/ascreg.h,v 1.2 2003/06/17 04:28:36 dillon Exp $ */ /*** Registers (base=3EB): ************/ #define ASC_CFG (scu->base) /*** ASC_CFG 3EB: configuration register. Write only, mirror in RAM *** 7 6 5 4 3 2 1 0 *** - - I_5 I_3 I10 D_3 - D_1 ***/ /*** #define ASC_CNF_MASK 0x3D */ /* was 0x5a */ #define ASC_CNF_DMA1 0x01 /* was (~0x02 & ASC_CNF_MASK) */ #define ASC_CNF_DMA3 0x04 /* was (~0x08 & ASC_CNF_MASK) */ #define ASC_CNF_IRQ3 0x10 /* was (~0x10 & ASC_CNF_MASK) */ #define ASC_CNF_IRQ5 0x20 /* was (~0x40 & ASC_CNF_MASK) */ #define ASC_CNF_IRQ10 0x08 /* was (~0x40 & ASC_CNF_MASK) */ /*** ASC_STAT 3EC: command/status; rw, mirror in ram *** 7 6 5 4 3 2 1 0 *** BSY - - - - - - - *** [<-- Resolution -->] 13h,10h,0eh,0ch,09h, 07h, 04h, 02h ***/ #define ASC_STAT (scu->base + 1) #define ASC_RDY_FLAG 0x80 #define ASC_RES_MASK 0x3f #define ASC_RES_800 0x13 #define ASC_RES_700 0x10 #define ASC_RES_600 0x0e #define ASC_RES_500 0x0c #define ASC_RES_400 0x09 /* 0x00 */ #define ASC_RES_300 0x07 /* 0x04 */ #define ASC_RES_200 0x04 /* 0x20 */ #define ASC_RES_100 0x02 /* 0x24 */ /*** ASC_CMD 3EC: command/status; rw, mirror in ram *** W: 7 6 5 4 3 2 1 0 *** . - - . . . . . *** b0: 1: light on & get resolution, 0: light off *** b1: 0: load scan len (sub_16, with b4=1, b7=1) *** b2: 1/0 : dma stuff *** b3: 0/1 : dma stuff *** b4: 1 : load scan len (sub_16, with b1=0, b7=1) *** b5: ? *** b6: ? *** b7: ? : set at beginning of sub_16 ***/ #define ASC_CMD (scu->base + 1) #define ASC_LIGHT_ON 0x01 #define ASC_SET_B2 0x04 #define ASC_OPERATE 0x91 /* from linux driver... */ #define ASC_STANDBY 0x05 /* from linux driver... */ /*** ASC_LEN_L, ASC_LEN_H 3ED, 3EE: transfer length, lsb first ***/ #define ASC_LEN_L ((scu->base)+2) #define ASC_LEN_H ((scu->base)+3) /*** 3EE ASC_PROBE (must read ASC_PROBE_VALUE) ***/ #define ASC_PROBE ((scu->base)+3) #define ASC_PROBE_VALUE 0xA5 /*** ASC_BOH 3EF: always write 0 at the moment, read some values ? ***/ #define ASC_BOH ((scu->base)+4)