.\" Copyright (c) 1980, 1991, 1993 .\" Regents of the University of California. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)dump.8 8.3 (Berkeley) 5/1/95 .\" $FreeBSD: src/sbin/dump/dump.8,v 1.27.2.18 2003/02/23 19:58:23 trhodes Exp $ .\" .Dd September 29, 2016 .Dt DUMP 8 .Os .Sh NAME .Nm dump , .Nm rdump .Nd UFS file system backup .Sh SYNOPSIS .Nm .Op Fl 0123456789acknSu .Op Fl B Ar records .Op Fl b Ar blocksize .Op Fl D Ar dumpdates .Op Fl C Ar cachesize .Op Fl d Ar density .Op Fl f Ar file .Op Fl h Ar level .Op Fl s Ar feet .Op Fl T Ar date .Ar filesystem .Nm .Fl W | Fl w .Sh DESCRIPTION The .Nm utility examines files on a file system and determines which files need to be backed up. These files are copied to the given disk, tape or other storage medium for safe keeping (see the .Fl f option below for doing remote backups). A dump that is larger than the output medium is broken into multiple volumes. On most media the size is determined by writing until an end-of-media indication is returned. This can be enforced by using the .Fl a option. .Pp On media that cannot reliably return an end-of-media indication (such as some cartridge tape drives) each volume is of a fixed size; the actual size is determined by the tape size and density and/or .Fl B options. By default, the same output file name is used for each volume after prompting the operator to change media. .Pp The file system to be dumped is specified by the argument .Ar filesystem as either its device-special file or its mount point (if that is in a standard entry in .Pa /etc/fstab ) . .Pp .Nm may also be invoked as .Nm rdump . The .Bx 4.3 option syntax is implemented for backward compatibility, but is not documented here. .Pp The following options are supported by .Nm : .Bl -tag -width Ds .It Fl 0-9 Dump levels. A level 0, full backup, guarantees the entire file system is copied (but see also the .Fl h option below). A level number above 0, incremental backup, tells dump to copy all files new or modified since the last dump of any lower level. The default level is 0. .It Fl a .Dq auto-size . Bypass all tape length considerations, and enforce writing until an end-of-media indication is returned. This fits best for most modern tape drives. Use of this option is particularly recommended when appending to an existing tape, or using a tape drive with hardware compression (where you can never be sure about the compression ratio). .It Fl B Ar records The number of kilobytes per output volume, except that if it is not an integer multiple of the output block size, the command uses the next smaller such multiple. This option overrides the calculation of tape size based on length and density. .It Fl b Ar blocksize The number of kilobytes per output block, except that if it is larger than 64, the command uses 64. (See the BUGS section.) The default block size is 10. .It Fl c Change the defaults for use with a cartridge tape drive, with a density of 8000 bpi, and a length of 1700 feet. .It Fl D Ar dumpdates Specify an alternate path to the .Pa dumpdates file. The default is .Pa /etc/dumpdates . .It Fl C Ar cachesize Specify the cache size in megabytes. This will greatly improve performance at the cost of .Nm possibly not noticing changes in the filesystem between passes. Beware that .Nm forks, and the actual memory use may be larger than the specified cache size. The recommended cache size is between 8 and 32 (megabytes). .It Fl d Ar density Set tape density to .Ar density . The default is 1600BPI. .It Fl f Ar file Write the backup to .Ar file ; .Ar file may be a special device file like .Pa /dev/sa0 (a tape drive), .Pa /dev/fd1 (a floppy disk drive), an ordinary file, or .Sq Fl (the standard output). Multiple file names may be given as a single argument separated by commas. Each file will be used for one dump volume in the order listed; if the dump requires more volumes than the number of names given, the last file name will used for all remaining volumes after prompting for media changes. If the name of the file is of the form .Dq host:file , or .Dq user@host:file , .Nm writes to the named file on the remote host using .Xr rmt 8 . The default path name of the remote .Xr rmt 8 program is .\" rmt path, is the path on the remote host .Pa /etc/rmt ; this can be overridden by the environment variable .Ev RMT . .It Fl h Ar level Honor the user .Dq nodump flag .Pq Dv UF_NODUMP only for dumps at or above the given .Ar level . The default honor level is 1, so that incremental backups omit such files but full backups retain them. .It Fl k Use Kerberos authentication to talk to remote tape servers. (Only available if this option was enabled when .Nm was compiled.) .It Fl n Whenever .Nm requires operator attention, notify all operators in the group .Dq operator by means similar to a .Xr wall 1 . .It Fl s Ar feet Attempt to calculate the amount of tape needed at a particular density. If this amount is exceeded, .Nm prompts for a new tape. It is recommended to be a bit conservative on this option. The default tape length is 2300 feet. .It Fl S Display an estimate of the backup size and the number of tapes required, and exit without actually performing the dump. .It Fl T Ar date Use the specified date as the starting time for the dump instead of the time determined from looking in the .Pa dumpdates file. The format of date is the same as that of .Xr ctime 3 . This option is useful for automated dump scripts that wish to dump over a specific period of time. The .Fl T option is mutually exclusive from the .Fl u option. .It Fl u Update the .Pa dumpdates file after a successful dump. The format of the .Pa dumpdates file is readable by people, consisting of one free format record per line: file system name, increment level and .Xr ctime 3 format dump date. There may be only one entry per file system at each level. The .Pa dumpdates file may be edited to change any of the fields, if necessary. The default path for the .Pa dumpdates file is .Pa /etc/dumpdates , but the .Fl D option may be used to change it. .It Fl W Tell the operator what file systems need to be dumped. This information is gleaned from the files .Pa dumpdates and .Pa /etc/fstab . The .Fl W option causes .Nm to print out, for each file system in the .Pa dumpdates file the most recent dump date and level, and highlights those file systems that should be dumped. If the .Fl W option is set, all other options are ignored, and .Nm exits immediately. .It Fl w Is like .Fl W , but prints only those file systems which need to be dumped. .El .Pp Directories and regular files which have their .Dq nodump flag .Pq Dv UF_NODUMP set will be omitted along with everything under such directories, subject to the .Fl h option. .Pp The .Nm utility requires operator intervention on these conditions: end of tape, end of dump, tape write error, tape open error or disk read error (if there are more than a threshold of 32). In addition to alerting all operators implied by the .Fl n key, .Nm interacts with the operator on .Em dump's control terminal at times when .Nm can no longer proceed, or if something is grossly wrong. All questions .Nm poses .Em must be answered by typing .Dq yes or .Dq no , appropriately. .Pp Since making a dump involves a lot of time and effort for full dumps, .Nm checkpoints itself at the start of each tape volume. If writing that volume fails for some reason, .Nm will, with operator permission, restart itself from the checkpoint after the old tape has been rewound and removed, and a new tape has been mounted. .Pp The .Nm utility tells the operator what is going on at periodic intervals (every 5 minutes, or promptly after receiving .Dv SIGINFO ) , including usually low estimates of the number of blocks to write, the number of tapes it will take, the time to completion, and the time to the tape change. The output is verbose, so that others know that the terminal controlling .Nm is busy, and will be for some time. .Pp In the event of a catastrophic disk event, the time required to restore all the necessary backup tapes or files to disk can be kept to a minimum by staggering the incremental dumps. An efficient method of staggering incremental dumps to minimize the number of tapes follows: .Bl -bullet -offset indent .It Always start with a level 0 backup, for example: .Bd -literal -offset indent /sbin/dump -0u -f /dev/nsa0 /usr/src .Ed .Pp This should be done at set intervals, say once a month or once every two months, and on a set of fresh tapes that is saved forever. .It After a level 0, dumps of active file systems are taken on a daily basis, using a modified Tower of Hanoi algorithm, with this sequence of dump levels: .Bd -literal -offset indent 3 2 5 4 7 6 9 8 9 9 ... .Ed .Pp For the daily dumps, it should be possible to use a fixed number of tapes for each day, used on a weekly basis. Each week, a level 1 dump is taken, and the daily Hanoi sequence repeats beginning with 3. For weekly dumps, another fixed set of tapes per dumped file system is used, also on a cyclical basis. .El .Pp After several months or so, the daily and weekly tapes should get rotated out of the dump cycle and fresh tapes brought in. .Sh ENVIRONMENT .Bl -tag -width ".Ev TAPE" .It Ev TAPE Device from which to read backup. .It Ev RMT Pathname of the remote .Xr rmt 8 program. .El .Sh FILES .Bl -tag -width /etc/dumpdates -compact .It Pa /dev/sa0 default tape unit to dump to .It Pa /etc/dumpdates dump date records (this can be changed; see the .Fl D option) .It Pa /etc/fstab dump table: file systems and frequency .It Pa /etc/group to find group .Em operator .El .Sh EXIT STATUS Dump exits with zero status on success. Startup errors are indicated with an exit code of 1; abnormal termination is indicated with an exit code of 3. .Sh DIAGNOSTICS Many, and verbose. .Sh SEE ALSO .Xr chflags 1 , .Xr fstab 5 , .Xr UFS 5 , .Xr restore 8 , .Xr rmt 8 .Sh HISTORY A .Nm utility appeared in .At v4 . .Sh BUGS Fewer than 32 read errors on the file system are ignored. .Pp Each reel requires a new process, so parent processes for reels already written just hang around until the entire tape is written. .Pp Currently, .Xr physio 9 slices all requests into chunks of 64 KB. Therefore, it is impossible to use a larger output block size, so .Nm will prevent this from happening. .Pp The .Nm utility with the .Fl W or .Fl w options does not report file systems that have never been recorded in the .Pa dumpdates file, even if listed in .Pa /etc/fstab . .Pp It would be nice if .Nm knew about the dump sequence, kept track of the tapes scribbled on, told the operator which tape to mount when, and provided more assistance for the operator running .Xr restore 8 . .Pp The .Nm utility cannot do remote backups without being run as root, due to its security history. This may be fixed in a later version of .Dx . Presently, it works if you set it setuid (like it used to be), but this might constitute a security risk.