# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
#
# NOTE:  Please would any committer updating this file also update the
# make.conf(5) manual page, if necessary, which is located in
# src/share/man/man5/make.conf.5.
#
# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
# It allows you to override macro definitions to make without changing
# your source tree, or anything the source tree installs.
#
# This file must be in valid Makefile syntax.
#
# You have to find the things you can put here in the Makefiles and 
# documentation of the source tree.
#
# The CPUTYPE variable controls which processor should be targeted for
# generated code.  This controls processor-specific optimizations in
# certain code (currently only OpenSSL) as well as modifying the value
# of CFLAGS to contain the appropriate optimization directive to gcc.
# The automatic setting of CFLAGS may be overridden using the
# NO_CPU_CFLAGS variable below.
# Currently the following CPU types are recognized:
#   Intel x86 architecture:
#       (AMD CPUs)	opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5
#       (Intel CPUs)	p4 pentium-m p3 p2 i686 i586/mmx i586 i486
#
# If you experience any problems after setting this flag, please unset
# it again before submitting a bug report or attempting to modify code.
# It may be that certain types of software will become unstable after being
# compiled with processor-specific (or higher - see below) optimization flags.
# If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
#
#CPUTYPE=i686
#NO_CPU_CFLAGS=	true	# Don't add -march=<cpu> to CFLAGS automatically
#NO_CPU_COPTFLAGS=true	# Don't add -march=<cpu> to COPTFLAGS automatically
#
# The CCVER variable controls which GCC-version to use by default.  It
# should be set using ?= so as not to interfere with CCVER overrides from
# userland or the buildworld.  Note that building world or the kernel using
# an experimental compiler might be broken at any time.  We currently
# recommend that an override NOT be set in /etc/make.conf.
#
#CCVER?=gcc80	# (use GCC 8, default)
#
# CFLAGS controls the compiler settings used when compiling C code.
# Note that optimization settings above -O (-O2, ...) are not recommended
# or supported for compiling the world or the kernel - please revert any
# nonstandard optimization settings to "-O" before submitting bug reports
# to the developers.
#
#CFLAGS= -O -pipe
#
# CXXFLAGS controls the compiler settings used when compiling C++ code.
# Note that CXXFLAGS is initially set to the value of CFLAGS.  If you wish
# to add to CXXFLAGS value, "+=" must be used rather than "=".  Using "="
# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
#
#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
#
# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
# for use in developing FreeBSD and testing changes.  They can be used by
# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf.  -Wconversion is not
# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
#
BDECFLAGS=	-W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
		-Wcast-qual -Wchar-subscripts -Winline \
		-Wmissing-prototypes -Wnested-externs -Wpointer-arith \
		-Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
#
# To compile just the kernel with special optimizations, you should use
# this instead of CFLAGS (which is not applicable to kernel builds anyway).
# There is very little to gain by using higher optimization levels, and doing
# so can cause problems.
#
#COPTFLAGS= -O -pipe
#
# WORLD_CCOPTLEVEL used as a helper to compile world with higher optimizations
# than -O, in sys.mk it is internally set into CFLAGS as -O${WORLD_CCOPTLEVEL}
# so user needs to account for it when overriding CFLAGS from make.conf.
# Available settings are: 0, 1, 2, 3, s, g, fast.
WORLD_CCOPTLEVEL?=
#
# WORLD_CFLAGS is another helper for compiling DPorts (explicitly set as empty).
# It is recommended to add extra compiler settings to it rather then to CFLAGS
# directly. As WORLD_CCOPTLEVEL the WORLD_CFLAGS are added internally in sys.mk.
WORLD_CFLAGS?=
#
# Strip the file before installing.  Setting this to nothing will keep
# the debugging symbols in the installed files.
#STRIP=	-s
#
# Compare before install
#INSTALL=install -C
#
# Inhibit the automatic backup during installworld
#NO_BACKUP= true
#
# To build ppp with normal permissions
#PPP_NOSUID=	true
#
# To enable installing ssh(1) with the setuid bit turned on
#ENABLE_SUID_SSH=	true
#
# Default thread library (c_r or thread_xu)
THREAD_LIB?=	thread_xu
#
# To enable Hesiod support in libc
#WANT_HESIOD=	true
#
# To disable name caching in the nsswitch subsystem.  The generic caching
# daemon, nscd(8), will not be built either if this option is set.
#NO_NS_CACHING=	true
#
# To avoid building various parts of the base system:
#NO_ALTBINUTILS=true	# do not build the alternative set of binutils
#NO_ALTCOMPILER=true	# do not build GCC 4.7 and other alt compilers
#NO_CVS=	true	# do not build CVS
#NO_GAMES=	true	# do not enter the games subdirectory
#NO_GDB=	true	# do not build GDB
#NO_LIBC_R=	true	# do not build libc_r (re-entrant version of libc)
#NO_LPR=	true	# do not build lpr and related programs
#NO_MODULES=	true	# do not build modules with the kernel
#NO_SHARE=	true	# do not enter the share subdirectory
#NOMAN=		true	# do not build manual pages
#NOMANCOMPRESS=	true	# do not compress man pages
#NOPROFILE=	true	# Avoid compiling profiled libraries
#
# To build sys/modules when building the world (our old way of doing things)
#MODULES_WITH_WORLD=true	# do not build modules when building kernel
#
# The list of modules to build instead of all of them.
#MODULES_OVERRIDE=	net/ipfw
#
# By default, the system will always use the keyboard/video card as system
# console.  However, the boot blocks may be dynamically configured to use a
# serial port in addition to or instead of the keyboard/video console.
#
# By default we use COM1 as our serial console port *if* we're going to use
# a serial port as our console at all.  Alter as necessary.
#
#   COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
#
#BOOT_COMCONSOLE_PORT=	0x3F8
#
# The default serial console speed is 9600.  Set the speed to a larger value
# for better interactive response.
#
#BOOT_COMCONSOLE_SPEED=	115200
#
# To build the installer as part of buildworld.
#WANT_INSTALLER=yes
#
# OpenSSH: path to xauth program
#
#XAUTH_PATH=/usr/local/bin/xauth
#
# The list of locale modules to be compiled-in in the static
# libc.a (and profile/libc.a).
#STATIC_LOCALES=BIG5 EUC EUCTW ISO2022 MSKanji UTF8
STATIC_LOCALES=UTF8
# sendmail
#
# The following sets the default m4 configuration file to use at
# install time.  Use with caution as a make install will overwrite
# any existing /etc/mail/sendmail.cf. The value should be a fully
# qualified path name.  Avoid using a value of /etc/mail/sendmail.mc
# as a buildworld will create /etc/mail/sendmail.cf before
# installworld installs an updated sendmail binary.
#
#SENDMAIL_MC=/etc/mail/myconfig.mc
#
# The following sets the default m4 configuration file for mail
# submission to use at install time.  Use with caution as a make
# install will overwrite any existing /etc/mail/submit.cf.  The
# value should be a fully qualified path name.  Avoid using a value
# of /etc/mail/submit.mc as a buildworld will create /etc/mail/submit.cf
# before installworld installs an updated sendmail binary.
#
#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
#
# Setting the following variable modifies the flags passed to m4 when
# building a .cf file from a .mc file.  It can be used to enable
# features disabled by default.
#
#SENDMAIL_M4_FLAGS=
#
# The permissions to use on alias and map databases generated using
# /etc/mail/Makefile.
#
#SENDMAIL_MAP_PERMS=	640
#
# The sendmail.cf and sendmail.submit.cf files are generated from many
# m4 files that come from the installed sendmail.  Sendmail is now
# installed from DPorts together with these m4 files.
#
#SENDMAIL_CF_DIR=	/usr/local/share/sendmail/cf