This is mpfr.info, produced by makeinfo version 4.13 from mpfr.texi. This manual documents how to install and use the Multiple Precision Floating-Point Reliable Library, version 2.4.2. Copyright 1991, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in *note GNU Free Documentation License::. INFO-DIR-SECTION Software libraries START-INFO-DIR-ENTRY * mpfr: (mpfr). Multiple Precision Floating-Point Reliable Library. END-INFO-DIR-ENTRY  File: mpfr.info, Node: Top, Next: Copying, Prev: (dir), Up: (dir) GNU MPFR ******** This manual documents how to install and use the Multiple Precision Floating-Point Reliable Library, version 2.4.2. Copyright 1991, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in *note GNU Free Documentation License::. * Menu: * Copying:: MPFR Copying Conditions (LGPL). * Introduction to MPFR:: Brief introduction to GNU MPFR. * Installing MPFR:: How to configure and compile the MPFR library. * Reporting Bugs:: How to usefully report bugs. * MPFR Basics:: What every MPFR user should now. * MPFR Interface:: MPFR functions and macros. * Contributors:: * References:: * GNU Free Documentation License:: * Concept Index:: * Function Index::  File: mpfr.info, Node: Copying, Next: Introduction to MPFR, Prev: Top, Up: Top MPFR Copying Conditions *********************** This library is "free"; this means that everyone is free to use it and free to redistribute it on a free basis. The library is not in the public domain; it is copyrighted and there are restrictions on its distribution, but these restrictions are designed to permit everything that a good cooperating citizen would want to do. What is not allowed is to try to prevent others from further sharing any version of this library that they might get from you. Specifically, we want to make sure that you have the right to give away copies of the library, that you receive source code or else can get it if you want it, that you can change this library or use pieces of it in new free programs, and that you know you can do these things. To make sure that everyone has such rights, we have to forbid you to deprive anyone else of these rights. For example, if you distribute copies of the GNU MPFR library, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must tell them their rights. Also, for our own protection, we must make certain that everyone finds out that there is no warranty for the GNU MPFR library. If it is modified by someone else and passed on, we want their recipients to know that what they have is not what we distributed, so that any problems introduced by others will not reflect on our reputation. The precise conditions of the license for the GNU MPFR library are found in the Lesser General Public License that accompanies the source code. See the file COPYING.LIB.  File: mpfr.info, Node: Introduction to MPFR, Next: Installing MPFR, Prev: Copying, Up: Top 1 Introduction to MPFR ********************** MPFR is a portable library written in C for arbitrary precision arithmetic on floating-point numbers. It is based on the GNU MP library. It aims to extend the class of floating-point numbers provided by the GNU MP library by a precise semantics. The main differences with the `mpf' class from GNU MP are: * the MPFR code is portable, i.e. the result of any operation does not depend (or should not) on the machine word size `mp_bits_per_limb' (32 or 64 on most machines); * the precision in bits can be set exactly to any valid value for each variable (including very small precision); * MPFR provides the four rounding modes from the IEEE 754-1985 standard. In particular, with a precision of 53 bits, MPFR should be able to exactly reproduce all computations with double-precision machine floating-point numbers (e.g., `double' type in C, with a C implementation that rigorously follows Annex F of the ISO C99 standard and `FP_CONTRACT' pragma set to `OFF') on the four arithmetic operations and the square root, except the default exponent range is much wider and subnormal numbers are not implemented (but can be emulated). This version of MPFR is released under the GNU Lesser General Public License, Version 2.1 or any later version. It is permitted to link MPFR to most non-free programs, as long as when distributing them the MPFR source code and a means to re-link with a modified MPFR library is provided. 1.1 How to Use This Manual ========================== Everyone should read *note MPFR Basics::. If you need to install the library yourself, you need to read *note Installing MPFR::, too. The rest of the manual can be used for later reference, although it is probably a good idea to glance through it.  File: mpfr.info, Node: Installing MPFR, Next: Reporting Bugs, Prev: Introduction to MPFR, Up: Top 2 Installing MPFR ***************** 2.1 How to Install ================== Here are the steps needed to install the library on Unix systems (more details are provided in the `INSTALL' file): 1. To build MPFR, you first have to install GNU MP (version 4.1 or higher) on your computer. You need a C compiler, preferably GCC, but any reasonable compiler should work. And you need a standard Unix `make' program, plus some other standard Unix utility programs. Then, in the MPFR build directory, type the following commands. 2. `./configure' This will prepare the build and setup the options according to your system. You can give options to specify the install directories (instead of the default `/usr/local'), threading support, and so on. See the `INSTALL' file and/or the output of `./configure --help' for more information, in particular if you get error messages. 3. `make' This will compile MPFR, and create a library archive file `libmpfr.a'. On most platforms, a dynamic library will be produced too (see configure). 4. `make check' This will make sure MPFR was built correctly. If you get error messages, please report this to `mpfr@loria.fr'. (*Note Reporting Bugs::, for information on what to include in useful bug reports.) 5. `make install' This will copy the files `mpfr.h' and `mpf2mpfr.h' to the directory `/usr/local/include', the library files (`libmpfr.a' and possibly others) to the directory `/usr/local/lib', the file `mpfr.info' to the directory `/usr/local/share/info', and some other documentation files to the directory `/usr/local/share/doc/mpfr' (or if you passed the `--prefix' option to `configure', using the prefix directory given as argument to `--prefix' instead of `/usr/local'). 2.2 Other `make' Targets ======================== There are some other useful make targets: * `mpfr.info' or `info' Create or update an info version of the manual, in `mpfr.info'. This file is already provided in the MPFR archives. * `mpfr.pdf' or `pdf' Create a PDF version of the manual, in `mpfr.pdf'. * `mpfr.dvi' or `dvi' Create a DVI version of the manual, in `mpfr.dvi'. * `mpfr.ps' or `ps' Create a Postscript version of the manual, in `mpfr.ps'. * `mpfr.html' or `html' Create a HTML version of the manual, in several pages in the directory `mpfr.html'; if you want only one output HTML file, then type `makeinfo --html --no-split mpfr.texi' instead. * `clean' Delete all object files and archive files, but not the configuration files. * `distclean' Delete all generated files not included in the distribution. * `uninstall' Delete all files copied by `make install'. 2.3 Build Problems ================== In case of problem, please read the `INSTALL' file carefully before reporting a bug, in particular section "In case of problem". Some problems are due to bad configuration on the user side (not specific to MPFR). Problems are also mentioned in the FAQ `http://www.mpfr.org/faq.html'. Please report problems to `mpfr@loria.fr'. *Note Reporting Bugs::. Some bug fixes are available on the MPFR 2.4.2 web page `http://www.mpfr.org/mpfr-2.4.2/'. 2.4 Getting the Latest Version of MPFR ====================================== The latest version of MPFR is available from `ftp://ftp.gnu.org/gnu/mpfr/' or `http://www.mpfr.org/'.  File: mpfr.info, Node: Reporting Bugs, Next: MPFR Basics, Prev: Installing MPFR, Up: Top 3 Reporting Bugs **************** If you think you have found a bug in the MPFR library, first have a look on the MPFR 2.4.2 web page `http://www.mpfr.org/mpfr-2.4.2/' and the FAQ `http://www.mpfr.org/faq.html': perhaps this bug is already known, in which case you may find there a workaround for it. Otherwise, please investigate and report it. We have made this library available to you, and it is not to ask too much from you, to ask you to report the bugs that you find. There are a few things you should think about when you put your bug report together. You have to send us a test case that makes it possible for us to reproduce the bug. Include instructions on how to run the test case. You also have to explain what is wrong; if you get a crash, or if the results printed are incorrect and in that case, in what way. Please include compiler version information in your bug report. This can be extracted using `cc -V' on some machines, or, if you're using gcc, `gcc -v'. Also, include the output from `uname -a' and the MPFR version (the GMP version may be useful too). If your bug report is good, we will do our best to help you to get a corrected version of the library; if the bug report is poor, we will not do anything about it (aside of chiding you to send better bug reports). Send your bug report to: `mpfr@loria.fr'. If you think something in this manual is unclear, or downright incorrect, or if the language needs to be improved, please send a note to the same address.  File: mpfr.info, Node: MPFR Basics, Next: MPFR Interface, Prev: Reporting Bugs, Up: Top 4 MPFR Basics ************* 4.1 Headers and Libraries ========================= All declarations needed to use MPFR are collected in the include file `mpfr.h'. It is designed to work with both C and C++ compilers. You should include that file in any program using the MPFR library: #include Note however that prototypes for MPFR functions with `FILE *' parameters are provided only if `' is included too (before `mpfr.h'). #include #include Likewise `' (or `') is required for prototypes with `va_list' parameters, such as `mpfr_vprintf'. And for any functions using `intmax_t', you must include `' or `' before `mpfr.h', to allow `mpfr.h' to define prototypes for these functions. Moreover, users of C++ compilers under some platforms may need to define the `__STDC_CONSTANT_MACROS' macro (before `' or `' has been included) or `MPFR_USE_INTMAX_T' (before `mpfr.h' has been included), at least for portability; of course, it is possible to do that on the command line, e.g., with `-DMPFR_USE_INTMAX_T'. You can avoid the use of MPFR macros encapsulating functions by defining the `MPFR_USE_NO_MACRO' macro before `mpfr.h' is included. In general this should not be necessary, but this can be useful when debugging user code: with some macros, the compiler may emit spurious warnings with some warning options, and macros can prevent some prototype checking. All programs using MPFR must link against both `libmpfr' and `libgmp' libraries. On a typical Unix-like system this can be done with `-lmpfr -lgmp' (in that order), for example gcc myprogram.c -lmpfr -lgmp MPFR is built using Libtool and an application can use that to link if desired, *note GNU Libtool: (libtool.info)Top. If MPFR has been installed to a non-standard location, then it may be necessary to set up environment variables such as `C_INCLUDE_PATH' and `LIBRARY_PATH', or use `-I' and `-L' compiler options, in order to point to the right directories. For a shared library, it may also be necessary to set up some sort of run-time library path (e.g., `LD_LIBRARY_PATH') on some systems. Please read the `INSTALL' file for additional information. 4.2 Nomenclature and Types ========================== A "floating-point number" or "float" for short, is an arbitrary precision significand (also called mantissa) with a limited precision exponent. The C data type for such objects is `mpfr_t' (internally defined as a one-element array of a structure, and `mpfr_ptr' is the C data type representing a pointer to this structure). A floating-point number can have three special values: Not-a-Number (NaN) or plus or minus Infinity. NaN represents an uninitialized object, the result of an invalid operation (like 0 divided by 0), or a value that cannot be determined (like +Infinity minus +Infinity). Moreover, like in the IEEE 754 standard, zero is signed, i.e. there are both +0 and -0; the behavior is the same as in the IEEE 754 standard and it is generalized to the other functions supported by MPFR. Unless documented otherwise, the sign bit of a NaN is unspecified. The "precision" is the number of bits used to represent the significand of a floating-point number; the corresponding C data type is `mp_prec_t'. The precision can be any integer between `MPFR_PREC_MIN' and `MPFR_PREC_MAX'. In the current implementation, `MPFR_PREC_MIN' is equal to 2. Warning! MPFR needs to increase the precision internally, in order to provide accurate results (and in particular, correct rounding). Do not attempt to set the precision to any value near `MPFR_PREC_MAX', otherwise MPFR will abort due to an assertion failure. Moreover, you may reach some memory limit on your platform, in which case the program may abort, crash or have undefined behavior (depending on your C implementation). The "rounding mode" specifies the way to round the result of a floating-point operation, in case the exact result can not be represented exactly in the destination significand; the corresponding C data type is `mp_rnd_t'. A "limb" means the part of a multi-precision number that fits in a single word. (We chose this word because a limb of the human body is analogous to a digit, only larger, and containing several digits.) Normally a limb contains 32 or 64 bits. The C data type for a limb is `mp_limb_t'. 4.3 Function Classes ==================== There is only one class of functions in the MPFR library: 1. Functions for floating-point arithmetic, with names beginning with `mpfr_'. The associated type is `mpfr_t'. 4.4 MPFR Variable Conventions ============================= As a general rule, all MPFR functions expect output arguments before input arguments. This notation is based on an analogy with the assignment operator. MPFR allows you to use the same variable for both input and output in the same expression. For example, the main function for floating-point multiplication, `mpfr_mul', can be used like this: `mpfr_mul (x, x, x, rnd_mode)'. This computes the square of X with rounding mode `rnd_mode' and puts the result back in X. Before you can assign to an MPFR variable, you need to initialize it by calling one of the special initialization functions. When you're done with a variable, you need to clear it out, using one of the functions for that purpose. A variable should only be initialized once, or at least cleared out between each initialization. After a variable has been initialized, it may be assigned to any number of times. For efficiency reasons, avoid to initialize and clear out a variable in loops. Instead, initialize it before entering the loop, and clear it out after the loop has exited. You do not need to be concerned about allocating additional space for MPFR variables, since any variable has a significand of fixed size. Hence unless you change its precision, or clear and reinitialize it, a floating-point variable will have the same allocated space during all its life. 4.5 Rounding Modes ================== The following four rounding modes are supported: * `GMP_RNDN': round to nearest (roundTiesToEven in IEEE 754-2008) * `GMP_RNDZ': round toward zero (roundTowardZero in IEEE 754-2008) * `GMP_RNDU': round toward plus infinity (roundTowardPositive in IEEE 754-2008) * `GMP_RNDD': round toward minus infinity (roundTowardNegative in IEEE 754-2008) The `round to nearest' mode works as in the IEEE 754 standard: in case the number to be rounded lies exactly in the middle of two representable numbers, it is rounded to the one with the least significant bit set to zero. For example, the number 5/2, which is represented by (10.1) in binary, is rounded to (10.0)=2 with a precision of two bits, and not to (11.0)=3. This rule avoids the "drift" phenomenon mentioned by Knuth in volume 2 of The Art of Computer Programming (Section 4.2.2). Most MPFR functions take as first argument the destination variable, as second and following arguments the input variables, as last argument a rounding mode, and have a return value of type `int', called the "ternary value". The value stored in the destination variable is correctly rounded, i.e. MPFR behaves as if it computed the result with an infinite precision, then rounded it to the precision of this variable. The input variables are regarded as exact (in particular, their precision does not affect the result). As a consequence, in case of a non-zero real rounded result, the error on the result is less or equal to 1/2 ulp (unit in the last place) of the target in the rounding to nearest mode, and less than 1 ulp of the target in the directed rounding modes (a ulp is the weight of the least significant represented bit of the target after rounding). Unless documented otherwise, functions returning an `int' return a ternary value. If the ternary value is zero, it means that the value stored in the destination variable is the exact result of the corresponding mathematical function. If the ternary value is positive (resp. negative), it means the value stored in the destination variable is greater (resp. lower) than the exact result. For example with the `GMP_RNDU' rounding mode, the ternary value is usually positive, except when the result is exact, in which case it is zero. In the case of an infinite result, it is considered as inexact when it was obtained by overflow, and exact otherwise. A NaN result (Not-a-Number) always corresponds to an exact return value. The opposite of a returned ternary value is guaranteed to be representable in an `int'. Unless documented otherwise, functions returning a `1' (or any other value specified in this manual) for special cases (like `acos(0)') should return an overflow or an underflow if `1' is not representable in the current exponent range. 4.6 Floating-Point Values on Special Numbers ============================================ This section specifies the floating-point values (of type `mpfr_t') returned by MPFR functions. For functions returning several values (like `mpfr_sin_cos'), the rules apply to each result separately. Functions can have one or several input arguments. An input point is a mapping from these input arguments to the set of the MPFR numbers. When none of its components are NaN, an input point can also be seen as a tuple in the extended real numbers (the set of the real numbers with both infinities). When the input point is in the domain of the mathematical function, the result is rounded as described in Section "Rounding Modes" (but see below for the specification of the sign of an exact zero). Otherwise the general rules from this section apply unless stated otherwise in the description of the MPFR function (*note MPFR Interface::). When the input point is not in the domain of the mathematical function but is in its closure in the extended real numbers and the function can be extended by continuity, the result is the obtained limit. Examples: `mpfr_hypot' on (+Inf,0) gives +Inf. But `mpfr_pow' cannot be defined on (1,+Inf) using this rule, as one can find sequences (X_N,Y_N) such that X_N goes to 1, Y_N goes to +Inf and X_N to the Y_N goes to any positive value when N goes to the infinity. When the input point is in the closure of the domain of the mathematical function and an input argument is +0 (resp. -0), one considers the limit when the corresponding argument approaches 0 from above (resp. below). If the limit is not defined (e.g., `mpfr_log' on -0), the behavior must be specified in the description of the MPFR function. When the result is equal to 0, its sign is determined by considering the limit as if the input point were not in the domain: If one approaches 0 from above (resp. below), the result is +0 (resp. -0). In the other cases, the sign must be specified in the description of the MPFR function. Example: `mpfr_sin' on +0 gives +0. When the input point is not in the closure of the domain of the function, the result is NaN. Example: `mpfr_sqrt' on -17 gives NaN. When an input argument is NaN, the result is NaN, possibly except when a partial function is constant on the finite floating-point numbers; such a case is always explicitly specified in *note MPFR Interface::. Example: `mpfr_hypot' on (NaN,0) gives NaN, but `mpfr_hypot' on (NaN,+Inf) gives +Inf (as specified in *note Special Functions::), since for any finite input X, `mpfr_hypot' on (X,+Inf) gives +Inf. 4.7 Exceptions ============== MPFR supports 5 exception types: * Underflow: An underflow occurs when the exact result of a function is a non-zero real number and the result obtained after the rounding, assuming an unbounded exponent range (for the rounding), has an exponent smaller than the minimum exponent of the current range. In the round-to-nearest mode, the halfway case is rounded toward zero. Note: This is not the single definition of the underflow. MPFR chooses to consider the underflow after rounding. The underflow before rounding can also be defined. For instance, consider a function that has the exact result 7 multiplied by two to the power E-4, where E is the smallest exponent (for a significand between 1/2 and 1) in the current range, with a 2-bit target precision and rounding toward plus infinity. The exact result has the exponent E-1. With the underflow before rounding, such a function call would yield an underflow, as E-1 is outside the current exponent range. However, MPFR first considers the rounded result assuming an unbounded exponent range. The exact result cannot be represented exactly in precision 2, and here, it is rounded to 0.5 times 2 to E, which is representable in the current exponent range. As a consequence, this will not yield an underflow in MPFR. * Overflow: An overflow occurs when the exact result of a function is a non-zero real number and the result obtained after the rounding, assuming an unbounded exponent range (for the rounding), has an exponent larger than the maximum exponent of the current range. In the round-to-nearest mode, the result is infinite. * NaN: A NaN exception occurs when the result of a function is a NaN. * Inexact: An inexact exception occurs when the result of a function cannot be represented exactly and must be rounded. * Range error: A range exception occurs when a function that does not return a MPFR number (such as comparisons and conversions to an integer) has an invalid result (e.g. an argument is NaN in `mpfr_cmp' or in a conversion to an integer). MPFR has a global flag for each exception, which can be cleared, set or tested by functions described in *note Exception Related Functions::. Differences with the ISO C99 standard: * In C, only quiet NaNs are specified, and a NaN propagation does not raise an invalid exception. Unless explicitly stated otherwise, MPFR sets the NaN flag whenever a NaN is generated, even when a NaN is propagated (e.g. in NaN + NaN), as if all NaNs were signaling. * An invalid exception in C corresponds to either a NaN exception or a range error in MPFR. 4.8 Memory Handling =================== MPFR functions may create caches, e.g. when computing constants such as Pi, either because the user has called a function like `mpfr_const_pi' directly or because such a function was called internally by the MPFR library itself to compute some other function. At any time, the user can free the various caches with `mpfr_free_cache'. It is strongly advised to do that before terminating a thread, or before exiting when using tools like `valgrind' (to avoid memory leaks being reported). MPFR internal data such as flags, the exponent range, the default precision and rounding mode, and caches (i.e., data that are not accessed via parameters) are either global (if MPFR has not been compiled as thread safe) or per-thread (thread local storage).  File: mpfr.info, Node: MPFR Interface, Next: Contributors, Prev: MPFR Basics, Up: Top 5 MPFR Interface **************** The floating-point functions expect arguments of type `mpfr_t'. The MPFR floating-point functions have an interface that is similar to the GNU MP integer functions. The function prefix for floating-point operations is `mpfr_'. There is one significant characteristic of floating-point numbers that has motivated a difference between this function class and other GNU MP function classes: the inherent inexactness of floating-point arithmetic. The user has to specify the precision for each variable. A computation that assigns a variable will take place with the precision of the assigned variable; the cost of that computation should not depend from the precision of variables used as input (on average). The semantics of a calculation in MPFR is specified as follows: Compute the requested operation exactly (with "infinite accuracy"), and round the result to the precision of the destination variable, with the given rounding mode. The MPFR floating-point functions are intended to be a smooth extension of the IEEE 754 arithmetic. The results obtained on one computer should not differ from the results obtained on a computer with a different word size. MPFR does not keep track of the accuracy of a computation. This is left to the user or to a higher layer. As a consequence, if two variables are used to store only a few significant bits, and their product is stored in a variable with large precision, then MPFR will still compute the result with full precision. The value of the standard C macro `errno' may be set to non-zero by any MPFR function or macro, whether or not there is an error. * Menu: * Initialization Functions:: * Assignment Functions:: * Combined Initialization and Assignment Functions:: * Conversion Functions:: * Basic Arithmetic Functions:: * Comparison Functions:: * Special Functions:: * Input and Output Functions:: * Formatted Output Functions:: * Integer Related Functions:: * Rounding Related Functions:: * Miscellaneous Functions:: * Exception Related Functions:: * Compatibility with MPF:: * Custom Interface:: * Internals::  File: mpfr.info, Node: Initialization Functions, Next: Assignment Functions, Prev: MPFR Interface, Up: MPFR Interface 5.1 Initialization Functions ============================ An `mpfr_t' object must be initialized before storing the first value in it. The functions `mpfr_init' and `mpfr_init2' are used for that purpose. -- Function: void mpfr_init2 (mpfr_t X, mp_prec_t PREC) Initialize X, set its precision to be *exactly* PREC bits and its value to NaN. (Warning: the corresponding `mpf' functions initialize to zero instead.) Normally, a variable should be initialized once only or at least be cleared, using `mpfr_clear', between initializations. To change the precision of a variable which has already been initialized, use `mpfr_set_prec'. The precision PREC must be an integer between `MPFR_PREC_MIN' and `MPFR_PREC_MAX' (otherwise the behavior is undefined). -- Function: void mpfr_inits2 (mp_prec_t PREC, mpfr_t X, ...) Initialize all the `mpfr_t' variables of the given `va_list', set their precision to be *exactly* PREC bits and their value to NaN. See `mpfr_init2' for more details. The `va_list' is assumed to be composed only of type `mpfr_t' (or equivalently `mpfr_ptr'). It begins from X. It ends when it encounters a null pointer (whose type must also be `mpfr_ptr'). -- Function: void mpfr_clear (mpfr_t X) Free the space occupied by X. Make sure to call this function for all `mpfr_t' variables when you are done with them. -- Function: void mpfr_clears (mpfr_t X, ...) Free the space occupied by all the `mpfr_t' variables of the given `va_list'. See `mpfr_clear' for more details. The `va_list' is assumed to be composed only of type `mpfr_t' (or equivalently `mpfr_ptr'). It begins from X. It ends when it encounters a null pointer (whose type must also be `mpfr_ptr'). Here is an example of how to use multiple initialization functions: { mpfr_t x, y, z, t; mpfr_inits2 (256, x, y, z, t, (mpfr_ptr) 0); ... mpfr_clears (x, y, z, t, (mpfr_ptr) 0); } -- Function: void mpfr_init (mpfr_t X) Initialize X and set its value to NaN. Normally, a variable should be initialized once only or at least be cleared, using `mpfr_clear', between initializations. The precision of X is the default precision, which can be changed by a call to `mpfr_set_default_prec'. Warning! In a given program, some other libraries might change the default precision and not restore it. Thus it is safer to use `mpfr_init2'. -- Function: void mpfr_inits (mpfr_t X, ...) Initialize all the `mpfr_t' variables of the given `va_list', set their precision to be the default precision and their value to NaN. See `mpfr_init' for more details. The `va_list' is assumed to be composed only of type `mpfr_t' (or equivalently `mpfr_ptr'). It begins from X. It ends when it encounters a null pointer (whose type must also be `mpfr_ptr'). Warning! In a given program, some other libraries might change the default precision and not restore it. Thus it is safer to use `mpfr_inits2'. -- Macro: MPFR_DECL_INIT (NAME, PREC) This macro declares NAME as an automatic variable of type `mpfr_t', initializes it and sets its precision to be *exactly* PREC bits and its value to NaN. NAME must be a valid identifier. You must use this macro in the declaration section. This macro is much faster than using `mpfr_init2' but has some drawbacks: * You *must not* call `mpfr_clear' with variables created with this macro (the storage is allocated at the point of declaration and deallocated when the brace-level is exited). * You *cannot* change their precision. * You *should not* create variables with huge precision with this macro. * Your compiler must support `Non-Constant Initializers' (standard in C++ and ISO C99) and `Token Pasting' (standard in ISO C89). If PREC is not a constant expression, your compiler must support `variable-length automatic arrays' (standard in ISO C99). `GCC 2.95.3' and above supports all these features. If you compile your program with gcc in c89 mode and with `-pedantic', you may want to define the `MPFR_USE_EXTENSION' macro to avoid warnings due to the `MPFR_DECL_INIT' implementation. -- Function: void mpfr_set_default_prec (mp_prec_t PREC) Set the default precision to be *exactly* PREC bits. The precision of a variable means the number of bits used to store its significand. All subsequent calls to `mpfr_init' will use this precision, but previously initialized variables are unaffected. This default precision is set to 53 bits initially. The precision can be any integer between `MPFR_PREC_MIN' and `MPFR_PREC_MAX'. -- Function: mp_prec_t mpfr_get_default_prec (void) Return the default MPFR precision in bits. Here is an example on how to initialize floating-point variables: { mpfr_t x, y; mpfr_init (x); /* use default precision */ mpfr_init2 (y, 256); /* precision _exactly_ 256 bits */ ... /* When the program is about to exit, do ... */ mpfr_clear (x); mpfr_clear (y); mpfr_free_cache (); } The following functions are useful for changing the precision during a calculation. A typical use would be for adjusting the precision gradually in iterative algorithms like Newton-Raphson, making the computation precision closely match the actual accurate part of the numbers. -- Function: void mpfr_set_prec (mpfr_t X, mp_prec_t PREC) Reset the precision of X to be *exactly* PREC bits, and set its value to NaN. The previous value stored in X is lost. It is equivalent to a call to `mpfr_clear(x)' followed by a call to `mpfr_init2(x, prec)', but more efficient as no allocation is done in case the current allocated space for the significand of X is enough. The precision PREC can be any integer between `MPFR_PREC_MIN' and `MPFR_PREC_MAX'. In case you want to keep the previous value stored in X, use `mpfr_prec_round' instead. -- Function: mp_prec_t mpfr_get_prec (mpfr_t X) Return the precision actually used for assignments of X, i.e. the number of bits used to store its significand.  File: mpfr.info, Node: Assignment Functions, Next: Combined Initialization and Assignment Functions, Prev: Initialization Functions, Up: MPFR Interface 5.2 Assignment Functions ======================== These functions assign new values to already initialized floats (*note Initialization Functions::). -- Function: int mpfr_set (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_set_ui (mpfr_t ROP, unsigned long int OP, mp_rnd_t RND) -- Function: int mpfr_set_si (mpfr_t ROP, long int OP, mp_rnd_t RND) -- Function: int mpfr_set_uj (mpfr_t ROP, uintmax_t OP, mp_rnd_t RND) -- Function: int mpfr_set_sj (mpfr_t ROP, intmax_t OP, mp_rnd_t RND) -- Function: int mpfr_set_d (mpfr_t ROP, double OP, mp_rnd_t RND) -- Function: int mpfr_set_ld (mpfr_t ROP, long double OP, mp_rnd_t RND) -- Function: int mpfr_set_decimal64 (mpfr_t ROP, _Decimal64 OP, mp_rnd_t RND) -- Function: int mpfr_set_z (mpfr_t ROP, mpz_t OP, mp_rnd_t RND) -- Function: int mpfr_set_q (mpfr_t ROP, mpq_t OP, mp_rnd_t RND) -- Function: int mpfr_set_f (mpfr_t ROP, mpf_t OP, mp_rnd_t RND) Set the value of ROP from OP, rounded toward the given direction RND. Note that the input 0 is converted to +0 by `mpfr_set_ui', `mpfr_set_si', `mpfr_set_sj', `mpfr_set_uj', `mpfr_set_z', `mpfr_set_q' and `mpfr_set_f', regardless of the rounding mode. If the system does not support the IEEE 754 standard, `mpfr_set_d', `mpfr_set_ld' and `mpfr_set_decimal64' might not preserve the signed zeros. The `mpfr_set_decimal64' function is built only with the configure option `--enable-decimal-float', which also requires `--with-gmp-build', and when the compiler or system provides the `_Decimal64' data type (GCC version 4.2.0 is known to support this data type, but only when configured with `--enable-decimal-float' too). `mpfr_set_q' might not be able to work if the numerator (or the denominator) can not be representable as a `mpfr_t'. Note: If you want to store a floating-point constant to a `mpfr_t', you should use `mpfr_set_str' (or one of the MPFR constant functions, such as `mpfr_const_pi' for Pi) instead of `mpfr_set_d', `mpfr_set_ld' or `mpfr_set_decimal64'. Otherwise the floating-point constant will be first converted into a reduced-precision (e.g., 53-bit) binary number before MPFR can work with it. -- Function: int mpfr_set_ui_2exp (mpfr_t ROP, unsigned long int OP, mp_exp_t E, mp_rnd_t RND) -- Function: int mpfr_set_si_2exp (mpfr_t ROP, long int OP, mp_exp_t E, mp_rnd_t RND) -- Function: int mpfr_set_uj_2exp (mpfr_t ROP, uintmax_t OP, intmax_t E, mp_rnd_t RND) -- Function: int mpfr_set_sj_2exp (mpfr_t ROP, intmax_t OP, intmax_t E, mp_rnd_t RND) Set the value of ROP from OP multiplied by two to the power E, rounded toward the given direction RND. Note that the input 0 is converted to +0. -- Function: int mpfr_set_str (mpfr_t ROP, const char *S, int BASE, mp_rnd_t RND) Set ROP to the value of the string S in base BASE, rounded in the direction RND. See the documentation of `mpfr_strtofr' for a detailed description of the valid string formats. Contrary to `mpfr_strtofr', `mpfr_set_str' requires the _whole_ string to represent a valid floating-point number. This function returns 0 if the entire string up to the final null character is a valid number in base BASE; otherwise it returns -1, and ROP may have changed. -- Function: int mpfr_strtofr (mpfr_t ROP, const char *NPTR, char **ENDPTR, int BASE, mp_rnd_t RND) Read a floating-point number from a string NPTR in base BASE, rounded in the direction RND; BASE must be either 0 (to detect the base, as described below) or a number from 2 to 36 (otherwise the behavior is undefined). If NPTR starts with valid data, the result is stored in ROP and `*ENDPTR' points to the character just after the valid data (if ENDPTR is not a null pointer); otherwise ROP is set to zero and the value of NPTR is stored in the location referenced by ENDPTR (if ENDPTR is not a null pointer). The usual ternary value is returned. Parsing follows the standard C `strtod' function with some extensions. Case is ignored. After optional leading whitespace, one has a subject sequence consisting of an optional sign (`+' or `-'), and either numeric data or special data. The subject sequence is defined as the longest initial subsequence of the input string, starting with the first non-whitespace character, that is of the expected form. The form of numeric data is a non-empty sequence of significand digits with an optional decimal point, and an optional exponent consisting of an exponent prefix followed by an optional sign and a non-empty sequence of decimal digits. A significand digit is either a decimal digit or a Latin letter (62 possible characters), with `a' = 10, `b' = 11, ..., `z' = 35; its value must be strictly less than the base. The decimal point can be either the one defined by the current locale or the period (the first one is accepted for consistency with the C standard and the practice, the second one is accepted to allow the programmer to provide MPFR numbers from strings in a way that does not depend on the current locale). The exponent prefix can be `e' or `E' for bases up to 10, or `@' in any base; it indicates a multiplication by a power of the base. In bases 2 and 16, the exponent prefix can also be `p' or `P', in which case it introduces a binary exponent: it indicates a multiplication by a power of 2 (there is a difference only for base 16). The value of an exponent is always written in base 10. In base 2, the significand can start with `0b' or `0B', and in base 16, it can start with `0x' or `0X'. If the argument BASE is 0, then the base is automatically detected as follows. If the significand starts with `0b' or `0B', base 2 is assumed. If the significand starts with `0x' or `0X', base 16 is assumed. Otherwise base 10 is assumed. Note: The exponent must contain at least a digit. Otherwise the possible exponent prefix and sign are not part of the number (which ends with the significand). Similarly, if `0b', `0B', `0x' or `0X' is not followed by a binary/hexadecimal digit, then the subject sequence stops at the character `0'. Special data (for infinities and NaN) can be `@inf@' or `@nan@(n-char-sequence)', and if BASE <= 16, it can also be `infinity', `inf', `nan' or `nan(n-char-sequence-opt)', all case insensitive. A `n-char-sequence-opt' is a possibly empty string containing only digits, Latin letters and the underscore (0, 1, 2, ..., 9, a, b, ..., z, A, B, ..., Z, _). Note: one has an optional sign for all data, even NaN. -- Function: void mpfr_set_inf (mpfr_t X, int SIGN) -- Function: void mpfr_set_nan (mpfr_t X) Set the variable X to infinity or NaN (Not-a-Number) respectively. In `mpfr_set_inf', X is set to plus infinity iff SIGN is nonnegative. -- Function: void mpfr_swap (mpfr_t X, mpfr_t Y) Swap the values X and Y efficiently. Warning: the precisions are exchanged too; in case the precisions are different, `mpfr_swap' is thus not equivalent to three `mpfr_set' calls using a third auxiliary variable.  File: mpfr.info, Node: Combined Initialization and Assignment Functions, Next: Conversion Functions, Prev: Assignment Functions, Up: MPFR Interface 5.3 Combined Initialization and Assignment Functions ==================================================== -- Macro: int mpfr_init_set (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Macro: int mpfr_init_set_ui (mpfr_t ROP, unsigned long int OP, mp_rnd_t RND) -- Macro: int mpfr_init_set_si (mpfr_t ROP, signed long int OP, mp_rnd_t RND) -- Macro: int mpfr_init_set_d (mpfr_t ROP, double OP, mp_rnd_t RND) -- Macro: int mpfr_init_set_ld (mpfr_t ROP, long double OP, mp_rnd_t RND) -- Macro: int mpfr_init_set_z (mpfr_t ROP, mpz_t OP, mp_rnd_t RND) -- Macro: int mpfr_init_set_q (mpfr_t ROP, mpq_t OP, mp_rnd_t RND) -- Macro: int mpfr_init_set_f (mpfr_t ROP, mpf_t OP, mp_rnd_t RND) Initialize ROP and set its value from OP, rounded in the direction RND. The precision of ROP will be taken from the active default precision, as set by `mpfr_set_default_prec'. -- Function: int mpfr_init_set_str (mpfr_t X, const char *S, int BASE, mp_rnd_t RND) Initialize X and set its value from the string S in base BASE, rounded in the direction RND. See `mpfr_set_str'.  File: mpfr.info, Node: Conversion Functions, Next: Basic Arithmetic Functions, Prev: Combined Initialization and Assignment Functions, Up: MPFR Interface 5.4 Conversion Functions ======================== -- Function: double mpfr_get_d (mpfr_t OP, mp_rnd_t RND) -- Function: long double mpfr_get_ld (mpfr_t OP, mp_rnd_t RND) -- Function: _Decimal64 mpfr_get_decimal64 (mpfr_t OP, mp_rnd_t RND) Convert OP to a `double' (respectively `_Decimal64' or `long double'), using the rounding mode RND. If OP is NaN, some fixed NaN (either quiet or signaling) or the result of 0.0/0.0 is returned. If OP is ±Inf, an infinity of the same sign or the result of ±1.0/0.0 is returned. If OP is zero, these functions return a zero, trying to preserve its sign, if possible. The `mpfr_get_decimal64' function is built only under some conditions: see the documentation of `mpfr_set_decimal64'. -- Function: double mpfr_get_d_2exp (long *EXP, mpfr_t OP, mp_rnd_t RND) -- Function: long double mpfr_get_ld_2exp (long *EXP, mpfr_t OP, mp_rnd_t RND) Return D and set EXP such that 0.5<=abs(D)<1 and D times 2 raised to EXP equals OP rounded to double (resp. long double) precision, using the given rounding mode. If OP is zero, then a zero of the same sign (or an unsigned zero, if the implementation does not have signed zeros) is returned, and EXP is set to 0. If OP is NaN or an infinity, then the corresponding double precision (resp. long-double precision) value is returned, and EXP is undefined. -- Function: long mpfr_get_si (mpfr_t OP, mp_rnd_t RND) -- Function: unsigned long mpfr_get_ui (mpfr_t OP, mp_rnd_t RND) -- Function: intmax_t mpfr_get_sj (mpfr_t OP, mp_rnd_t RND) -- Function: uintmax_t mpfr_get_uj (mpfr_t OP, mp_rnd_t RND) Convert OP to a `long', an `unsigned long', an `intmax_t' or an `uintmax_t' (respectively) after rounding it with respect to RND. If OP is NaN, the result is undefined. If OP is too big for the return type, it returns the maximum or the minimum of the corresponding C type, depending on the direction of the overflow. The _erange_ flag is set too. See also `mpfr_fits_slong_p', `mpfr_fits_ulong_p', `mpfr_fits_intmax_p' and `mpfr_fits_uintmax_p'. -- Function: mp_exp_t mpfr_get_z_exp (mpz_t ROP, mpfr_t OP) Put the scaled significand of OP (regarded as an integer, with the precision of OP) into ROP, and return the exponent EXP (which may be outside the current exponent range) such that OP exactly equals ROP multiplied by two exponent EXP. If OP is zero, the minimal exponent `emin' is returned. If the exponent is not representable in the `mp_exp_t' type, the behavior is undefined. -- Function: void mpfr_get_z (mpz_t ROP, mpfr_t OP, mp_rnd_t RND) Convert OP to a `mpz_t', after rounding it with respect to RND. If OP is NaN or Inf, the result is undefined. -- Function: int mpfr_get_f (mpf_t ROP, mpfr_t OP, mp_rnd_t RND) Convert OP to a `mpf_t', after rounding it with respect to RND. Return zero iff no error occurred, in particular a non-zero value is returned if OP is NaN or Inf, which do not exist in `mpf'. -- Function: char * mpfr_get_str (char *STR, mp_exp_t *EXPPTR, int B, size_t N, mpfr_t OP, mp_rnd_t RND) Convert OP to a string of digits in base B, with rounding in the direction RND, where N is either zero (see below) or the number of significant digits; in the latter case, N must be greater or equal to 2. The base may vary from 2 to 36. The generated string is a fraction, with an implicit radix point immediately to the left of the first digit. For example, the number -3.1416 would be returned as "-31416" in the string and 1 written at EXPPTR. If RND is to nearest, and OP is exactly in the middle of two possible outputs, the one with an even significand is chosen: that significand is considered with the exponent of OP. Note that for an odd base, this may not correspond to an even last digit: for example with 2 digits in base 7, 16 and a half is rounded to 20 which is 14 in decimal, 36 and a half is rounded to 40 which is 28 in decimal, and 66 and a half is rounded to 66 which is 48 in decimal. If N is zero, the number of digits of the significand is chosen large enough so that re-reading the printed value with the same precision, assuming both output and input use rounding to nearest, will recover the original value of OP. More precisely, in most cases, the chosen precision of STR is the minimal precision depending on P = PREC(OP) and B only that satisfies the above property, i.e., m = 1 + ceil(P*log(2)/log(B)), with P replaced by P-1 if B is a power of 2, but in some very rare cases, it might be m+1 (the smallest case for bases up to 62 is when P equals 186564318007 for bases 7 and 49). If STR is a null pointer, space for the significand is allocated using the current allocation function, and a pointer to the string is returned. To free the returned string, you must use `mpfr_free_str'. If STR is not a null pointer, it should point to a block of storage large enough for the significand, i.e., at least `max(N + 2, 7)'. The extra two bytes are for a possible minus sign, and for the terminating null character. If the input number is an ordinary number, the exponent is written through the pointer EXPPTR (the current minimal exponent for 0). A pointer to the string is returned, unless there is an error, in which case a null pointer is returned. -- Function: void mpfr_free_str (char *STR) Free a string allocated by `mpfr_get_str' using the current unallocation function (preliminary interface). The block is assumed to be `strlen(STR)+1' bytes. For more information about how it is done: *note Custom Allocation: (gmp.info)Custom Allocation. -- Function: int mpfr_fits_ulong_p (mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_fits_slong_p (mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_fits_uint_p (mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_fits_sint_p (mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_fits_ushort_p (mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_fits_sshort_p (mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_fits_intmax_p (mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_fits_uintmax_p (mpfr_t OP, mp_rnd_t RND) Return non-zero if OP would fit in the respective C data type, when rounded to an integer in the direction RND.  File: mpfr.info, Node: Basic Arithmetic Functions, Next: Comparison Functions, Prev: Conversion Functions, Up: MPFR Interface 5.5 Basic Arithmetic Functions ============================== -- Function: int mpfr_add (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_add_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int OP2, mp_rnd_t RND) -- Function: int mpfr_add_si (mpfr_t ROP, mpfr_t OP1, long int OP2, mp_rnd_t RND) -- Function: int mpfr_add_d (mpfr_t ROP, mpfr_t OP1, double OP2, mp_rnd_t RND) -- Function: int mpfr_add_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2, mp_rnd_t RND) -- Function: int mpfr_add_q (mpfr_t ROP, mpfr_t OP1, mpq_t OP2, mp_rnd_t RND) Set ROP to OP1 + OP2 rounded in the direction RND. For types having no signed zero, it is considered unsigned (i.e. (+0) + 0 = (+0) and (-0) + 0 = (-0)). The `mpfr_add_d' function assumes that the radix of the `double' type is a power of 2, with a precision at most that declared by the C implementation (macro `IEEE_DBL_MANT_DIG', and if not defined 53 bits). -- Function: int mpfr_sub (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_ui_sub (mpfr_t ROP, unsigned long int OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_sub_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int OP2, mp_rnd_t RND) -- Function: int mpfr_si_sub (mpfr_t ROP, long int OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_sub_si (mpfr_t ROP, mpfr_t OP1, long int OP2, mp_rnd_t RND) -- Function: int mpfr_d_sub (mpfr_t ROP, double OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_sub_d (mpfr_t ROP, mpfr_t OP1, double OP2, mp_rnd_t RND) -- Function: int mpfr_sub_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2, mp_rnd_t RND) -- Function: int mpfr_sub_q (mpfr_t ROP, mpfr_t OP1, mpq_t OP2, mp_rnd_t RND) Set ROP to OP1 - OP2 rounded in the direction RND. For types having no signed zero, it is considered unsigned (i.e. (+0) - 0 = (+0), (-0) - 0 = (-0), 0 - (+0) = (-0) and 0 - (-0) = (+0)). The same restrictions than for `mpfr_add_d' apply to `mpfr_d_sub' and `mpfr_sub_d'. -- Function: int mpfr_mul (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_mul_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int OP2, mp_rnd_t RND) -- Function: int mpfr_mul_si (mpfr_t ROP, mpfr_t OP1, long int OP2, mp_rnd_t RND) -- Function: int mpfr_mul_d (mpfr_t ROP, mpfr_t OP1, double OP2, mp_rnd_t RND) -- Function: int mpfr_mul_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2, mp_rnd_t RND) -- Function: int mpfr_mul_q (mpfr_t ROP, mpfr_t OP1, mpq_t OP2, mp_rnd_t RND) Set ROP to OP1 times OP2 rounded in the direction RND. When a result is zero, its sign is the product of the signs of the operands (for types having no signed zero, it is considered positive). The same restrictions than for `mpfr_add_d' apply to `mpfr_mul_d'. -- Function: int mpfr_sqr (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the square of OP rounded in the direction RND. -- Function: int mpfr_div (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_ui_div (mpfr_t ROP, unsigned long int OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_div_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int OP2, mp_rnd_t RND) -- Function: int mpfr_si_div (mpfr_t ROP, long int OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_div_si (mpfr_t ROP, mpfr_t OP1, long int OP2, mp_rnd_t RND) -- Function: int mpfr_d_div (mpfr_t ROP, double OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_div_d (mpfr_t ROP, mpfr_t OP1, double OP2, mp_rnd_t RND) -- Function: int mpfr_div_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2, mp_rnd_t RND) -- Function: int mpfr_div_q (mpfr_t ROP, mpfr_t OP1, mpq_t OP2, mp_rnd_t RND) Set ROP to OP1/OP2 rounded in the direction RND. When a result is zero, its sign is the product of the signs of the operands (for types having no signed zero, it is considered positive). The same restrictions than for `mpfr_add_d' apply to `mpfr_d_div' and `mpfr_div_d'. -- Function: int mpfr_sqrt (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_sqrt_ui (mpfr_t ROP, unsigned long int OP, mp_rnd_t RND) Set ROP to the square root of OP rounded in the direction RND. Return -0 if OP is -0 (to be consistent with the IEEE 754 standard). Set ROP to NaN if OP is negative. -- Function: int mpfr_rec_sqrt (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the reciprocal square root of OP rounded in the direction RND. Return +Inf if OP is ±0, and +0 if OP is +Inf. Set ROP to NaN if OP is negative. -- Function: int mpfr_cbrt (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_root (mpfr_t ROP, mpfr_t OP, unsigned long int K, mp_rnd_t RND) Set ROP to the cubic root (resp. the Kth root) of OP rounded in the direction RND. An odd (resp. even) root of a negative number (including -Inf) returns a negative number (resp. NaN). The Kth root of -0 is defined to be -0, whatever the parity of K. -- Function: int mpfr_pow (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) -- Function: int mpfr_pow_ui (mpfr_t ROP, mpfr_t OP1, unsigned long int OP2, mp_rnd_t RND) -- Function: int mpfr_pow_si (mpfr_t ROP, mpfr_t OP1, long int OP2, mp_rnd_t RND) -- Function: int mpfr_pow_z (mpfr_t ROP, mpfr_t OP1, mpz_t OP2, mp_rnd_t RND) -- Function: int mpfr_ui_pow_ui (mpfr_t ROP, unsigned long int OP1, unsigned long int OP2, mp_rnd_t RND) -- Function: int mpfr_ui_pow (mpfr_t ROP, unsigned long int OP1, mpfr_t OP2, mp_rnd_t RND) Set ROP to OP1 raised to OP2, rounded in the direction RND. Special values are currently handled as described in the ISO C99 standard for the `pow' function (note this may change in future versions): * `pow(±0, Y)' returns plus or minus infinity for Y a negative odd integer. * `pow(±0, Y)' returns plus infinity for Y negative and not an odd integer. * `pow(±0, Y)' returns plus or minus zero for Y a positive odd integer. * `pow(±0, Y)' returns plus zero for Y positive and not an odd integer. * `pow(-1, ±Inf)' returns 1. * `pow(+1, Y)' returns 1 for any Y, even a NaN. * `pow(X, ±0)' returns 1 for any X, even a NaN. * `pow(X, Y)' returns NaN for finite negative X and finite non-integer Y. * `pow(X, -Inf)' returns plus infinity for 0 < abs(x) < 1, and plus zero for abs(x) > 1. * `pow(X, +Inf)' returns plus zero for 0 < abs(x) < 1, and plus infinity for abs(x) > 1. * `pow(-Inf, Y)' returns minus zero for Y a negative odd integer. * `pow(-Inf, Y)' returns plus zero for Y negative and not an odd integer. * `pow(-Inf, Y)' returns minus infinity for Y a positive odd integer. * `pow(-Inf, Y)' returns plus infinity for Y positive and not an odd integer. * `pow(+Inf, Y)' returns plus zero for Y negative, and plus infinity for Y positive. -- Function: int mpfr_neg (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to -OP rounded in the direction RND. Just changes the sign if ROP and OP are the same variable. -- Function: int mpfr_abs (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the absolute value of OP, rounded in the direction RND. Just changes the sign if ROP and OP are the same variable. -- Function: int mpfr_dim (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) Set ROP to the positive difference of OP1 and OP2, i.e., OP1 - OP2 rounded in the direction RND if OP1 > OP2, and +0 otherwise. Returns NaN when OP1 or OP2 is NaN. -- Function: int mpfr_mul_2ui (mpfr_t ROP, mpfr_t OP1, unsigned long int OP2, mp_rnd_t RND) -- Function: int mpfr_mul_2si (mpfr_t ROP, mpfr_t OP1, long int OP2, mp_rnd_t RND) Set ROP to OP1 times 2 raised to OP2 rounded in the direction RND. Just increases the exponent by OP2 when ROP and OP1 are identical. -- Function: int mpfr_div_2ui (mpfr_t ROP, mpfr_t OP1, unsigned long int OP2, mp_rnd_t RND) -- Function: int mpfr_div_2si (mpfr_t ROP, mpfr_t OP1, long int OP2, mp_rnd_t RND) Set ROP to OP1 divided by 2 raised to OP2 rounded in the direction RND. Just decreases the exponent by OP2 when ROP and OP1 are identical.  File: mpfr.info, Node: Comparison Functions, Next: Special Functions, Prev: Basic Arithmetic Functions, Up: MPFR Interface 5.6 Comparison Functions ======================== -- Function: int mpfr_cmp (mpfr_t OP1, mpfr_t OP2) -- Function: int mpfr_cmp_ui (mpfr_t OP1, unsigned long int OP2) -- Function: int mpfr_cmp_si (mpfr_t OP1, signed long int OP2) -- Function: int mpfr_cmp_d (mpfr_t OP1, double OP2) -- Function: int mpfr_cmp_ld (mpfr_t OP1, long double OP2) -- Function: int mpfr_cmp_z (mpfr_t OP1, mpz_t OP2) -- Function: int mpfr_cmp_q (mpfr_t OP1, mpq_t OP2) -- Function: int mpfr_cmp_f (mpfr_t OP1, mpf_t OP2) Compare OP1 and OP2. Return a positive value if OP1 > OP2, zero if OP1 = OP2, and a negative value if OP1 < OP2. Both OP1 and OP2 are considered to their full own precision, which may differ. If one of the operands is NaN, set the _erange_ flag and return zero. Note: These functions may be useful to distinguish the three possible cases. If you need to distinguish two cases only, it is recommended to use the predicate functions (e.g., `mpfr_equal_p' for the equality) described below; they behave like the IEEE 754 comparisons, in particular when one or both arguments are NaN. But only floating-point numbers can be compared (you may need to do a conversion first). -- Function: int mpfr_cmp_ui_2exp (mpfr_t OP1, unsigned long int OP2, mp_exp_t E) -- Function: int mpfr_cmp_si_2exp (mpfr_t OP1, long int OP2, mp_exp_t E) Compare OP1 and OP2 multiplied by two to the power E. Similar as above. -- Function: int mpfr_cmpabs (mpfr_t OP1, mpfr_t OP2) Compare |OP1| and |OP2|. Return a positive value if |OP1| > |OP2|, zero if |OP1| = |OP2|, and a negative value if |OP1| < |OP2|. If one of the operands is NaN, set the _erange_ flag and return zero. -- Function: int mpfr_nan_p (mpfr_t OP) -- Function: int mpfr_inf_p (mpfr_t OP) -- Function: int mpfr_number_p (mpfr_t OP) -- Function: int mpfr_zero_p (mpfr_t OP) Return non-zero if OP is respectively NaN, an infinity, an ordinary number (i.e. neither NaN nor an infinity) or zero. Return zero otherwise. -- Macro: int mpfr_sgn (mpfr_t OP) Return a positive value if OP > 0, zero if OP = 0, and a negative value if OP < 0. If the operand is NaN, set the _erange_ flag and return zero. -- Function: int mpfr_greater_p (mpfr_t OP1, mpfr_t OP2) Return non-zero if OP1 > OP2, zero otherwise. -- Function: int mpfr_greaterequal_p (mpfr_t OP1, mpfr_t OP2) Return non-zero if OP1 >= OP2, zero otherwise. -- Function: int mpfr_less_p (mpfr_t OP1, mpfr_t OP2) Return non-zero if OP1 < OP2, zero otherwise. -- Function: int mpfr_lessequal_p (mpfr_t OP1, mpfr_t OP2) Return non-zero if OP1 <= OP2, zero otherwise. -- Function: int mpfr_lessgreater_p (mpfr_t OP1, mpfr_t OP2) Return non-zero if OP1 < OP2 or OP1 > OP2 (i.e. neither OP1, nor OP2 is NaN, and OP1 <> OP2), zero otherwise (i.e. OP1 and/or OP2 are NaN, or OP1 = OP2). -- Function: int mpfr_equal_p (mpfr_t OP1, mpfr_t OP2) Return non-zero if OP1 = OP2, zero otherwise (i.e. OP1 and/or OP2 are NaN, or OP1 <> OP2). -- Function: int mpfr_unordered_p (mpfr_t OP1, mpfr_t OP2) Return non-zero if OP1 or OP2 is a NaN (i.e. they cannot be compared), zero otherwise.  File: mpfr.info, Node: Special Functions, Next: Input and Output Functions, Prev: Comparison Functions, Up: MPFR Interface 5.7 Special Functions ===================== All those functions, except explicitly stated, return zero for an exact return value, a positive value for a return value larger than the exact result, and a negative value otherwise. Important note: in some domains, computing special functions (either with correct or incorrect rounding) is expensive, even for small precision, for example the trigonometric and Bessel functions for large argument. -- Function: int mpfr_log (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_log2 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_log10 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the natural logarithm of OP, log2(OP) or log10(OP), respectively, rounded in the direction RND. Return -Inf if OP is -0 (i.e. the sign of the zero has no influence on the result). -- Function: int mpfr_exp (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_exp2 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_exp10 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the exponential of OP, to 2 power of OP or to 10 power of OP, respectively, rounded in the direction RND. -- Function: int mpfr_cos (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_sin (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_tan (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the cosine of OP, sine of OP, tangent of OP, rounded in the direction RND. -- Function: int mpfr_sec (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_csc (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_cot (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the secant of OP, cosecant of OP, cotangent of OP, rounded in the direction RND. -- Function: int mpfr_sin_cos (mpfr_t SOP, mpfr_t COP, mpfr_t OP, mp_rnd_t RND) Set simultaneously SOP to the sine of OP and COP to the cosine of OP, rounded in the direction RND with the corresponding precisions of SOP and COP, which must be different variables. Return 0 iff both results are exact. -- Function: int mpfr_acos (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_asin (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_atan (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the arc-cosine, arc-sine or arc-tangent of OP, rounded in the direction RND. Note that since `acos(-1)' returns the floating-point number closest to Pi according to the given rounding mode, this number might not be in the output range 0 <= ROP < \pi of the arc-cosine function; still, the result lies in the image of the output range by the rounding function. The same holds for `asin(-1)', `asin(1)', `atan(-Inf)', `atan(+Inf)'. -- Function: int mpfr_atan2 (mpfr_t ROP, mpfr_t Y, mpfr_t X, mp_rnd_t RND) Set ROP to the arc-tangent2 of Y and X, rounded in the direction RND: if `x > 0', `atan2(y, x) = atan (y/x)'; if `x < 0', `atan2(y, x) = sign(y)*(Pi - atan (abs(y/x)))'. As for `atan', in case the exact mathematical result is +Pi or -Pi, its rounded result might be outside the function output range. `atan2(y, 0)' does not raise any floating-point exception. Special values are currently handled as described in the ISO C99 standard for the `atan2' function (note this may change in future versions): * `atan2(+0, -0)' returns +Pi. * `atan2(-0, -0)' returns -Pi. * `atan2(+0, +0)' returns +0. * `atan2(-0, +0)' returns -0. * `atan2(+0, x)' returns +Pi for x < 0. * `atan2(-0, x)' returns -Pi for x < 0. * `atan2(+0, x)' returns +0 for x > 0. * `atan2(-0, x)' returns -0 for x > 0. * `atan2(y, 0)' returns -Pi/2 for y < 0. * `atan2(y, 0)' returns +Pi/2 for y > 0. * `atan2(+Inf, -Inf)' returns +3*Pi/4. * `atan2(-Inf, -Inf)' returns -3*Pi/4. * `atan2(+Inf, +Inf)' returns +Pi/4. * `atan2(-Inf, +Inf)' returns -Pi/4. * `atan2(+Inf, x)' returns +Pi/2 for finite x. * `atan2(-Inf, x)' returns -Pi/2 for finite x. * `atan2(y, -Inf)' returns +Pi for finite y > 0. * `atan2(y, -Inf)' returns -Pi for finite y < 0. * `atan2(y, +Inf)' returns +0 for finite y > 0. * `atan2(y, +Inf)' returns -0 for finite y < 0. -- Function: int mpfr_cosh (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_sinh (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_tanh (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the hyperbolic cosine, sine or tangent of OP, rounded in the direction RND. -- Function: int mpfr_sinh_cosh (mpfr_t SOP, mpfr_t COP, mpfr_t OP, mp_rnd_t RND) Set simultaneously SOP to the hyperbolic sine of OP and COP to the hyperbolic cosine of OP, rounded in the direction RND with the corresponding precision of SOP and COP which must be different variables. Return 0 iff both results are exact. -- Function: int mpfr_sech (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_csch (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_coth (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the hyperbolic secant of OP, cosecant of OP, cotangent of OP, rounded in the direction RND. -- Function: int mpfr_acosh (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_asinh (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_atanh (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the inverse hyperbolic cosine, sine or tangent of OP, rounded in the direction RND. -- Function: int mpfr_fac_ui (mpfr_t ROP, unsigned long int OP, mp_rnd_t RND) Set ROP to the factorial of the `unsigned long int' OP, rounded in the direction RND. -- Function: int mpfr_log1p (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the logarithm of one plus OP, rounded in the direction RND. -- Function: int mpfr_expm1 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the exponential of OP minus one, rounded in the direction RND. -- Function: int mpfr_eint (mpfr_t Y, mpfr_t X, mp_rnd_t RND) Set Y to the exponential integral of X, rounded in the direction RND. For positive X, the exponential integral is the sum of Euler's constant, of the logarithm of X, and of the sum for k from 1 to infinity of X to the power k, divided by k and factorial(k). For negative X, the returned value is NaN. -- Function: int mpfr_li2 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND_MODE) Set ROP to real part of the dilogarithm of OP, rounded in the direction RND_MODE. The dilogarithm function is defined here as the integral of -log(1-t)/t from 0 to x. -- Function: int mpfr_gamma (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the value of the Gamma function on OP, rounded in the direction RND. When OP is a negative integer, NaN is returned. -- Function: int mpfr_lngamma (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the value of the logarithm of the Gamma function on OP, rounded in the direction RND. When -2K-1 <= X <= -2K, K being a non-negative integer, NaN is returned. See also `mpfr_lgamma'. -- Function: int mpfr_lgamma (mpfr_t ROP, int *SIGNP, mpfr_t OP, mp_rnd_t RND) Set ROP to the value of the logarithm of the absolute value of the Gamma function on OP, rounded in the direction RND. The sign (1 or -1) of Gamma(OP) is returned in the object pointed to by SIGNP. When OP is an infinity or a non-positive integer, +Inf is returned. When OP is NaN, -Inf or a negative integer, *SIGNP is undefined, and when OP is ±0, *SIGNP is the sign of the zero. -- Function: int mpfr_zeta (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_zeta_ui (mpfr_t ROP, unsigned long OP, mp_rnd_t RND) Set ROP to the value of the Riemann Zeta function on OP, rounded in the direction RND. -- Function: int mpfr_erf (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the value of the error function on OP, rounded in the direction RND. -- Function: int mpfr_erfc (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the value of the complementary error function on OP, rounded in the direction RND. -- Function: int mpfr_j0 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_j1 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_jn (mpfr_t ROP, long N, mpfr_t OP, mp_rnd_t RND) Set ROP to the value of the first kind Bessel function of order 0, 1 and N on OP, rounded in the direction RND. When OP is NaN, ROP is always set to NaN. When OP is plus or minus Infinity, ROP is set to +0. When OP is zero, and N is not zero, ROP is +0 or -0 depending on the parity and sign of N, and the sign of OP. -- Function: int mpfr_y0 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_y1 (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_yn (mpfr_t ROP, long N, mpfr_t OP, mp_rnd_t RND) Set ROP to the value of the second kind Bessel function of order 0, 1 and N on OP, rounded in the direction RND. When OP is NaN or negative, ROP is always set to NaN. When OP is +Inf, ROP is +0. When OP is zero, ROP is +Inf or -Inf depending on the parity and sign of N. -- Function: int mpfr_fma (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mpfr_t OP3, mp_rnd_t RND) Set ROP to (OP1 times OP2) + OP3, rounded in the direction RND. -- Function: int mpfr_fms (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mpfr_t OP3, mp_rnd_t RND) Set ROP to (OP1 times OP2) - OP3, rounded in the direction RND. -- Function: int mpfr_agm (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) Set ROP to the arithmetic-geometric mean of OP1 and OP2, rounded in the direction RND. The arithmetic-geometric mean is the common limit of the sequences u[n] and v[n], where u[0]=OP1, v[0]=OP2, u[n+1] is the arithmetic mean of u[n] and v[n], and v[n+1] is the geometric mean of u[n] and v[n]. If any operand is negative, the return value is NaN. -- Function: int mpfr_hypot (mpfr_t ROP, mpfr_t X, mpfr_t Y, mp_rnd_t RND) Set ROP to the Euclidean norm of X and Y, i.e. the square root of the sum of the squares of X and Y, rounded in the direction RND. Special values are currently handled as described in Section F.9.4.3 of the ISO C99 standard, for the `hypot' function (note this may change in future versions): If X or Y is an infinity, then plus infinity is returned in ROP, even if the other number is NaN. -- Function: int mpfr_const_log2 (mpfr_t ROP, mp_rnd_t RND) -- Function: int mpfr_const_pi (mpfr_t ROP, mp_rnd_t RND) -- Function: int mpfr_const_euler (mpfr_t ROP, mp_rnd_t RND) -- Function: int mpfr_const_catalan (mpfr_t ROP, mp_rnd_t RND) Set ROP to the logarithm of 2, the value of Pi, of Euler's constant 0.577..., of Catalan's constant 0.915..., respectively, rounded in the direction RND. These functions cache the computed values to avoid other calculations if a lower or equal precision is requested. To free these caches, use `mpfr_free_cache'. -- Function: void mpfr_free_cache (void) Free various caches used by MPFR internally, in particular the caches used by the functions computing constants (currently `mpfr_const_log2', `mpfr_const_pi', `mpfr_const_euler' and `mpfr_const_catalan'). You should call this function before terminating a thread, even if you did not call these functions directly (they could have been called internally). -- Function: int mpfr_sum (mpfr_t ROP, mpfr_ptr const TAB[], unsigned long N, mp_rnd_t RND) Set ROP to the sum of all elements of TAB, whose size is N, rounded in the direction RND. Warning, TAB is a table of pointers to mpfr_t, not a table of mpfr_t (preliminary interface). If the returned `int' value is zero, ROP is guaranteed to be the exact sum; otherwise ROP might be smaller than, equal to, or larger than the exact sum (in accordance to the rounding mode). However, `mpfr_sum' does guarantee the result is correctly rounded.  File: mpfr.info, Node: Input and Output Functions, Next: Formatted Output Functions, Prev: Special Functions, Up: MPFR Interface 5.8 Input and Output Functions ============================== This section describes functions that perform input from an input/output stream, and functions that output to an input/output stream. Passing a null pointer for a `stream' to any of these functions will make them read from `stdin' and write to `stdout', respectively. When using any of these functions, you must include the `' standard header before `mpfr.h', to allow `mpfr.h' to define prototypes for these functions. -- Function: size_t mpfr_out_str (FILE *STREAM, int BASE, size_t N, mpfr_t OP, mp_rnd_t RND) Output OP on stream STREAM, as a string of digits in base BASE, rounded in the direction RND. The base may vary from 2 to 36. Print N significant digits exactly, or if N is 0, enough digits so that OP can be read back exactly (see `mpfr_get_str'). In addition to the significant digits, a decimal point (defined by the current locale) at the right of the first digit and a trailing exponent in base 10, in the form `eNNN', are printed. If BASE is greater than 10, `@' will be used instead of `e' as exponent delimiter. Return the number of bytes written, or if an error occurred, return 0. -- Function: size_t mpfr_inp_str (mpfr_t ROP, FILE *STREAM, int BASE, mp_rnd_t RND) Input a string in base BASE from stream STREAM, rounded in the direction RND, and put the read float in ROP. This function reads a word (defined as a sequence of characters between whitespace) and parses it using `mpfr_set_str' (it may change). See the documentation of `mpfr_strtofr' for a detailed description of the valid string formats. Return the number of bytes read, or if an error occurred, return 0.  File: mpfr.info, Node: Formatted Output Functions, Next: Integer Related Functions, Prev: Input and Output Functions, Up: MPFR Interface 5.9 Formatted Output Functions ============================== 5.9.1 Requirements ------------------ The class of `mpfr_printf' functions provides formatted output in a similar manner as the standard C `printf'. These functions are defined only if your system supports ISO C variadic functions and the corresponding argument access macros. When using any of these functions, you must include the `' standard header before `mpfr.h', to allow `mpfr.h' to define prototypes for these functions. 5.9.2 Format String ------------------- The format specification accepted by `mpfr_printf' is an extension of the `printf' one. The conversion specification is of the form: % [flags] [width] [.[precision]] [type] [rounding] conv `flags', `width', and `precision' have the same meaning as for the standard `printf' (in particular, notice that the `precision' is related to the number of digits displayed in the base chosen by `conv' and not related to the internal precision of the `mpfr_t' variable). `mpfr_printf' accepts the same `type' specifiers as GMP (except the non-standard and deprecated `q', use `ll' instead), plus `R' and `P': `h' `short' `hh' `char' `j' `intmax_t' or `uintmax_t' `l' `long' or `wchar_t' `ll' `long long' `L' `long double' `t' `ptrdiff_t' `z' `size_t' `F' `mpf_t', float conversions `Q' `mpq_t', integer conversions `M' `mp_limb_t', integer conversions `N' `mp_limb_t' array, integer conversions `Z' `mpz_t', integer conversions `P' `mp_prec_t', integer conversions `R' `mpfr_t', float conversions The `type' specifiers have the same restrictions as those mentioned in the GMP documentation: *note Formatted Output Strings: (gmp.info)Formatted Output Strings. In particular, the `type' specifiers (except `R' and `P' defined by MPFR) are supported only if they are supported by `gmp_printf' in your GMP build; this implies that the standard specifiers, such as `t', must _also_ be supported by your C library if you want to use them. The `rounding' field is specific to `mpfr_t' arguments and should not be used with other types. With conversion specification not involving `P' and `R' types, `mpfr_printf' behaves exactly as `gmp_printf'. The `P' type specifies that a following `o', `u', `x', or `X' conversion specifier applies to a `mp_prec_t' argument. It is needed because the `mp_prec_t' type does not necessarily correspond to an `unsigned int' or any fixed standard type. The `precision' field specifies the minimum number of digits to appear. The default `precision' is 1. For example: mpfr_t x; mp_prec_t p; mpfr_init (x); ... p = mpfr_get_prec (x); mpfr_printf ("variable x with %Pu bits", p); The `R' type specifies that a following `a', `A', `b', `e', `E', `f', `F', `g', `G', or `n' conversion specifier applies to a `mpfr_t' argument. The `R' type can be followed by a `rounding' specifier denoted by one of the following characters: `U' round toward plus infinity `D' round toward minus infinity `Z' round toward zero `N' round to nearest `*' rounding mode indicated by the `mp_rnd_t' argument just before the corresponding `mpfr_t' variable. The default rounding mode is rounding to nearest. The following three examples are equivalent: mpfr_t x; mpfr_init (x); ... mpfr_printf ("%.128Rf", x); mpfr_printf ("%.128RNf", x); mpfr_printf ("%.128R*f", GMP_RNDN, x); The output `conv' specifiers allowed with `mpfr_t' parameter are: `a' `A' hex float, C99 style `b' binary output `e' `E' scientific format float `f' `F' fixed point float `g' `G' fixed or scientific float The conversion specifier `b' which displays the argument in binary is specific to `mpfr_t' arguments and should not be used with other types. Other conversion specifiers have the same meaning as for a `double' argument. In case of non-decimal output, only the significand is written in the specified base, the exponent is always displayed in decimal. Special values are always displayed as `nan', `-inf', and `inf' for `a', `b', `e', `f', and `g' specifiers and `NAN', `-INF', and `INF' for `A', `E', `F', and `G' specifiers. If the `precision' field is not empty, the `mpfr_t' number is rounded to the given precision in the direction specified by the rounding mode. If the precision is zero with rounding to nearest mode and one of the following `conv' specifier: `a', `A', `b', `e', `E', tie case is rounded to even when it lies between two values at the wanted precision which have the same exponent, otherwise, it is rounded away from zero. For instance, 85 is displayed as "8e+1" and 95 is displayed as "1e+2" with the format specification `"%.0RNe"'. This also applies when the `g' (resp. `G') conversion specifier uses the `e' (resp. `E') style. If the precision is set to a value greater than the maximum value for an `int', it will be silently reduced down to `INT_MAX'. If the `precision' field is empty (as in `%Re' or `%.Re') with `conv' specifier `e' and `E', the number is displayed with enough digits so that it can be read back exactly, assuming that the input and output variables have the same precision and that the input and output rounding modes are both rounding to nearest (as for `mpfr_get_str'). The default precision for an empty `precision' field with `conv' specifiers `f', `F', `g', and `G' is 6. 5.9.3 Functions --------------- -- Function: int mpfr_fprintf (FILE *STREAM, const char *TEMPLATE, ...) -- Function: int mpfr_vfprintf (FILE *STREAM, const char *TEMPLATE, va_list AP) Print to the stream STREAM the optional arguments under the control of the template string TEMPLATE. Return the number of characters written or a negative value if an error occurred. If the number of characters which ought to be written appears to exceed the maximum limit for an `int', nothing is written in the stream, the function returns -1, sets the _erange_ flag, and (in POSIX system only) `errno' is set to `EOVERFLOW'. -- Function: int mpfr_printf (const char *TEMPLATE, ...) -- Function: int mpfr_vprintf (const char *TEMPLATE, va_list AP) Print to `stdout' the optional arguments under the control of the template string TEMPLATE. Return the number of characters written or a negative value if an error occurred. If the number of characters which ought to be written appears to exceed the maximum limit for an `int', nothing is written in `stdout', the function returns -1, sets the _erange_ flag, and (in POSIX system only) `errno' is set to `EOVERFLOW'. -- Function: int mpfr_sprintf (char *BUF, const char *TEMPLATE, ...) -- Function: int mpfr_vsprintf (char *BUF, const char *TEMPLATE, va_list AP) Form a null-terminated string in BUF. No overlap is permitted between BUF and the other arguments. Return the number of characters written in the array BUF not counting the terminating null character or a negative value if an error occurred. If the number of characters which ought to be written appears to exceed the maximum limit for an `int', nothing is written in BUF, the function returns -1, sets the _erange_ flag, and (in POSIX system only) `errno' is set to `EOVERFLOW'. -- Function: int mpfr_snprintf (char *BUF, size_t N, const char *TEMPLATE, ...) -- Function: int mpfr_vsnprintf (char *BUF, size_t N, const char *TEMPLATE, va_list AP) Form a null-terminated string in BUF. If N is zero, nothing is written and BUF may be a null pointer, otherwise, the `n-1' first characters are written in BUF and the N-th is a null character. Return the number of characters that would have been written had N be sufficiently large, not counting the terminating null character or a negative value if an error occurred. If the number of characters produced by the optional arguments under the control of the template string TEMPLATE appears to exceed the maximum limit for an `int', nothing is written in BUF, the function returns -1, sets the _erange_ flag, and (in POSIX system only) `errno' is set to `EOVERFLOW'. -- Function: int mpfr_asprintf (char **STR, const char *TEMPLATE, ...) -- Function: int mpfr_vasprintf (char **STR, const char *TEMPLATE, va_list AP) Write their output as a null terminated string in a block of memory allocated using the current allocation function. A pointer to the block is stored in STR. The block of memory must be freed using `mpfr_free_str'. The return value is the number of characters written in the string, excluding the null-terminator or a negative value if an error occurred. If the number of characters produced by the optional arguments under the control of the template string TEMPLATE appears to exceed the maximum limit for an `int', STR is a null pointer, the function returns -1, sets the _erange_ flag, and (in POSIX system only) `errno' is set to `EOVERFLOW'.  File: mpfr.info, Node: Integer Related Functions, Next: Rounding Related Functions, Prev: Formatted Output Functions, Up: MPFR Interface 5.10 Integer and Remainder Related Functions ============================================ -- Function: int mpfr_rint (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_ceil (mpfr_t ROP, mpfr_t OP) -- Function: int mpfr_floor (mpfr_t ROP, mpfr_t OP) -- Function: int mpfr_round (mpfr_t ROP, mpfr_t OP) -- Function: int mpfr_trunc (mpfr_t ROP, mpfr_t OP) Set ROP to OP rounded to an integer. `mpfr_rint' rounds to the nearest representable integer in the given rounding mode, `mpfr_ceil' rounds to the next higher or equal representable integer, `mpfr_floor' to the next lower or equal representable integer, `mpfr_round' to the nearest representable integer, rounding halfway cases away from zero (as in the roundTiesToAway mode of IEEE 754-2008), and `mpfr_trunc' to the next representable integer toward zero. The returned value is zero when the result is exact, positive when it is greater than the original value of OP, and negative when it is smaller. More precisely, the returned value is 0 when OP is an integer representable in ROP, 1 or -1 when OP is an integer that is not representable in ROP, 2 or -2 when OP is not an integer. Note that `mpfr_round' is different from `mpfr_rint' called with the rounding to nearest mode (where halfway cases are rounded to an even integer or significand). Note also that no double rounding is performed; for instance, 4.5 (100.1 in binary) is rounded by `mpfr_round' to 4 (100 in binary) in 2-bit precision, though `round(4.5)' is equal to 5 and 5 (101 in binary) is rounded to 6 (110 in binary) in 2-bit precision. -- Function: int mpfr_rint_ceil (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_rint_floor (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_rint_round (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) -- Function: int mpfr_rint_trunc (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to OP rounded to an integer. `mpfr_rint_ceil' rounds to the next higher or equal integer, `mpfr_rint_floor' to the next lower or equal integer, `mpfr_rint_round' to the nearest integer, rounding halfway cases away from zero, and `mpfr_rint_trunc' to the next integer toward zero. If the result is not representable, it is rounded in the direction RND. The returned value is the ternary value associated with the considered round-to-integer function (regarded in the same way as any other mathematical function). -- Function: int mpfr_frac (mpfr_t ROP, mpfr_t OP, mp_rnd_t RND) Set ROP to the fractional part of OP, having the same sign as OP, rounded in the direction RND (unlike in `mpfr_rint', RND affects only how the exact fractional part is rounded, not how the fractional part is generated). -- Function: int mpfr_modf (mpfr_t IOP, mpfr_t FOP, mpfr_t OP, mp_rnd_t RND) Set simultaneously IOP to the integral part of OP and FOP to the fractional part of OP, rounded in the direction RND with the corresponding precision of IOP and FOP (equivalent to `mpfr_trunc(IOP, OP, RND)' and `mpfr_frac(FOP, OP, RND)'). The variables IOP and FOP must be different. Return 0 iff both results are exact. -- Function: int mpfr_fmod (mpfr_t R, mpfr_t X, mpfr_t Y, mp_rnd_t RND) -- Function: int mpfr_remainder (mpfr_t R, mpfr_t X, mpfr_t Y, mp_rnd_t RND) -- Function: int mpfr_remquo (mpfr_t R, long* Q, mpfr_t X, mpfr_t Y, mp_rnd_t RND) Set R to the value of x - n y, rounded according to the direction RND, where n is the integer quotient of X divided by Y, defined as follows: n is rounded toward zero for `mpfr_fmod', and to the nearest integer (ties rounded to even) for `mpfr_remainder' and `mpfr_remquo'. Special values are handled as described in Section F.9.7.1 of the ISO C99 standard: If X is infinite or Y is zero, R is NaN. If Y is infinite and X is finite, R is X rounded to the precision of R. If R is zero, it has the sign of X. The return value is the ternary value corresponding to R. Additionally, `mpfr_remquo' stores the low significant bits from the quotient in *Q (more precisely the number of bits in a `long' minus one), with the sign of X divided by Y (except if those low bits are all zero, in which case zero is returned). Note that X may be so large in magnitude relative to Y that an exact representation of the quotient is not practical. `mpfr_remainder' and `mpfr_remquo' functions are useful for additive argument reduction. -- Function: int mpfr_integer_p (mpfr_t OP) Return non-zero iff OP is an integer.  File: mpfr.info, Node: Rounding Related Functions, Next: Miscellaneous Functions, Prev: Integer Related Functions, Up: MPFR Interface 5.11 Rounding Related Functions =============================== -- Function: void mpfr_set_default_rounding_mode (mp_rnd_t RND) Set the default rounding mode to RND. The default rounding mode is to nearest initially. -- Function: mp_rnd_t mpfr_get_default_rounding_mode (void) Get the default rounding mode. -- Function: int mpfr_prec_round (mpfr_t X, mp_prec_t PREC, mp_rnd_t RND) Round X according to RND with precision PREC, which must be an integer between `MPFR_PREC_MIN' and `MPFR_PREC_MAX' (otherwise the behavior is undefined). If PREC is greater or equal to the precision of X, then new space is allocated for the significand, and it is filled with zeros. Otherwise, the significand is rounded to precision PREC with the given direction. In both cases, the precision of X is changed to PREC. -- Function: int mpfr_round_prec (mpfr_t X, mp_rnd_t RND, mp_prec_t PREC) [This function is obsolete. Please use `mpfr_prec_round' instead.] -- Function: int mpfr_can_round (mpfr_t B, mp_exp_t ERR, mp_rnd_t RND1, mp_rnd_t RND2, mp_prec_t PREC) Assuming B is an approximation of an unknown number X in the direction RND1 with error at most two to the power E(b)-ERR where E(b) is the exponent of B, return a non-zero value if one is able to round correctly X to precision PREC with the direction RND2, and 0 otherwise (including for NaN and Inf). This function *does not modify* its arguments. Note: if one wants to also determine the correct ternary value when rounding B to precision PREC, a useful trick is the following: if (mpfr_can_round (b, err, rnd1, GMP_RNDZ, prec + (rnd2 == GMP_RNDN))) ... Indeed, if RND2 is `GMP_RNDN', this will check if one can round to PREC+1 bits with a directed rounding: if so, one can surely round to nearest to PREC bits, and in addition one can determine the correct ternary value, which would not be the case when B is near from a value exactly representable on PREC bits. -- Function: const char * mpfr_print_rnd_mode (mp_rnd_t RND) Return the input string (GMP_RNDD, GMP_RNDU, GMP_RNDN, GMP_RNDZ) corresponding to the rounding mode RND or a null pointer if RND is an invalid rounding mode.  File: mpfr.info, Node: Miscellaneous Functions, Next: Exception Related Functions, Prev: Rounding Related Functions, Up: MPFR Interface 5.12 Miscellaneous Functions ============================ -- Function: void mpfr_nexttoward (mpfr_t X, mpfr_t Y) If X or Y is NaN, set X to NaN. Otherwise, if X is different from Y, replace X by the next floating-point number (with the precision of X and the current exponent range) in the direction of Y, if there is one (the infinite values are seen as the smallest and largest floating-point numbers). If the result is zero, it keeps the same sign. No underflow or overflow is generated. -- Function: void mpfr_nextabove (mpfr_t X) Equivalent to `mpfr_nexttoward' where Y is plus infinity. -- Function: void mpfr_nextbelow (mpfr_t X) Equivalent to `mpfr_nexttoward' where Y is minus infinity. -- Function: int mpfr_min (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) Set ROP to the minimum of OP1 and OP2. If OP1 and OP2 are both NaN, then ROP is set to NaN. If OP1 or OP2 is NaN, then ROP is set to the numeric value. If OP1 and OP2 are zeros of different signs, then ROP is set to -0. -- Function: int mpfr_max (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) Set ROP to the maximum of OP1 and OP2. If OP1 and OP2 are both NaN, then ROP is set to NaN. If OP1 or OP2 is NaN, then ROP is set to the numeric value. If OP1 and OP2 are zeros of different signs, then ROP is set to +0. -- Function: int mpfr_urandomb (mpfr_t ROP, gmp_randstate_t STATE) Generate a uniformly distributed random float in the interval 0 <= ROP < 1. More precisely, the number can be seen as a float with a random non-normalized significand and exponent 0, which is then normalized (thus if E denotes the exponent after normalization, then the least -E significant bits of the significand are always 0). Return 0, unless the exponent is not in the current exponent range, in which case ROP is set to NaN and a non-zero value is returned (this should never happen in practice, except in very specific cases). The second argument is a `gmp_randstate_t' structure which should be created using the GMP `gmp_randinit' function, see the GMP manual. -- Function: void mpfr_random (mpfr_t ROP) Generate a uniformly distributed random float in the interval 0 <= ROP < 1. This function is deprecated and will be suppressed in the next release; `mpfr_urandomb' should be used instead. -- Function: void mpfr_random2 (mpfr_t ROP, mp_size_t SIZE, mp_exp_t EXP) Generate a random float of at most SIZE limbs, with long strings of zeros and ones in the binary representation. The exponent of the number is in the interval -EXP to EXP. This function is useful for testing functions and algorithms, since this kind of random numbers have proven to be more likely to trigger corner-case bugs. Negative random numbers are generated when SIZE is negative. Put +0 in ROP when size if zero. The internal state of the default pseudorandom number generator is modified by a call to this function (the same one as GMP if MPFR was built using `--with-gmp-build'). This function is deprecated and will be suppressed in the next release. -- Function: mp_exp_t mpfr_get_exp (mpfr_t X) Get the exponent of X, assuming that X is a non-zero ordinary number and the significand is chosen in [1/2,1). The behavior for NaN, infinity or zero is undefined. -- Function: int mpfr_set_exp (mpfr_t X, mp_exp_t E) Set the exponent of X if E is in the current exponent range, and return 0 (even if X is not a non-zero ordinary number); otherwise, return a non-zero value. The significand is assumed to be in [1/2,1). -- Function: int mpfr_signbit (mpfr_t OP) Return a non-zero value iff OP has its sign bit set (i.e. if it is negative, -0, or a NaN whose representation has its sign bit set). -- Function: int mpfr_setsign (mpfr_t ROP, mpfr_t OP, int S, mp_rnd_t RND) Set the value of ROP from OP, rounded toward the given direction RND, then set (resp. clear) its sign bit if S is non-zero (resp. zero), even when OP is a NaN. -- Function: int mpfr_copysign (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) Set the value of ROP from OP1, rounded toward the given direction RND, then set its sign bit to that of OP2 (even when OP1 or OP2 is a NaN). This function is equivalent to `mpfr_setsign (ROP, OP1, mpfr_signbit (OP2), RND)'. -- Function: const char * mpfr_get_version (void) Return the MPFR version, as a null-terminated string. -- Macro: MPFR_VERSION -- Macro: MPFR_VERSION_MAJOR -- Macro: MPFR_VERSION_MINOR -- Macro: MPFR_VERSION_PATCHLEVEL -- Macro: MPFR_VERSION_STRING `MPFR_VERSION' is the version of MPFR as a preprocessing constant. `MPFR_VERSION_MAJOR', `MPFR_VERSION_MINOR' and `MPFR_VERSION_PATCHLEVEL' are respectively the major, minor and patch level of MPFR version, as preprocessing constants. `MPFR_VERSION_STRING' is the version (with an optional suffix, used in development and pre-release versions) as a string constant, which can be compared to the result of `mpfr_get_version' to check at run time the header file and library used match: if (strcmp (mpfr_get_version (), MPFR_VERSION_STRING)) fprintf (stderr, "Warning: header and library do not match\n"); Note: Obtaining different strings is not necessarily an error, as in general, a program compiled with some old MPFR version can be dynamically linked with a newer MPFR library version (if allowed by the library versioning system). -- Macro: long MPFR_VERSION_NUM (MAJOR, MINOR, PATCHLEVEL) Create an integer in the same format as used by `MPFR_VERSION' from the given MAJOR, MINOR and PATCHLEVEL. Here is an example of how to check the MPFR version at compile time: #if (!defined(MPFR_VERSION) || (MPFR_VERSION' line, #include #include any program written for MPF can be compiled directly with MPFR without any changes. All operations are then performed with the default MPFR rounding mode, which can be reset with `mpfr_set_default_rounding_mode'. Warning: the `mpf_init' and `mpf_init2' functions initialize to zero, whereas the corresponding MPFR functions initialize to NaN: this is useful to detect uninitialized values, but is slightly incompatible with `mpf'. -- Function: void mpfr_set_prec_raw (mpfr_t X, mp_prec_t PREC) Reset the precision of X to be *exactly* PREC bits. The only difference with `mpfr_set_prec' is that PREC is assumed to be small enough so that the significand fits into the current allocated memory space for X. Otherwise the behavior is undefined. -- Function: int mpfr_eq (mpfr_t OP1, mpfr_t OP2, unsigned long int OP3) Return non-zero if OP1 and OP2 are both non-zero ordinary numbers with the same exponent and the same first OP3 bits, both zero, or both infinities of the same sign. Return zero otherwise. This function is defined for compatibility with `mpf'. Do not use it if you want to know whether two numbers are close to each other; for instance, 1.011111 and 1.100000 are currently regarded as different for any value of OP3 larger than 1 (but this may change in the next release). -- Function: void mpfr_reldiff (mpfr_t ROP, mpfr_t OP1, mpfr_t OP2, mp_rnd_t RND) Compute the relative difference between OP1 and OP2 and store the result in ROP. This function does not guarantee the correct rounding on the relative difference; it just computes |OP1-OP2|/OP1, using the rounding mode RND for all operations and the precision of ROP. -- Function: int mpfr_mul_2exp (mpfr_t ROP, mpfr_t OP1, unsigned long int OP2, mp_rnd_t RND) -- Function: int mpfr_div_2exp (mpfr_t ROP, mpfr_t OP1, unsigned long int OP2, mp_rnd_t RND) See `mpfr_mul_2ui' and `mpfr_div_2ui'. These functions are only kept for compatibility with MPF.  File: mpfr.info, Node: Custom Interface, Next: Internals, Prev: Compatibility with MPF, Up: MPFR Interface 5.15 Custom Interface ===================== Some applications use a stack to handle the memory and their objects. However, the MPFR memory design is not well suited for such a thing. So that such applications are able to use MPFR, an auxiliary memory interface has been created: the Custom Interface. The following interface allows them to use MPFR in two ways: * Either they directly store the MPFR FP number as a `mpfr_t' on the stack. * Either they store their own representation of a FP number on the stack and construct a new temporary `mpfr_t' each time it is needed. Nothing has to be done to destroy the FP numbers except garbaging the used memory: all the memory stuff (allocating, destroying, garbaging) is kept to the application. Each function in this interface is also implemented as a macro for efficiency reasons: for example `mpfr_custom_init (s, p)' uses the macro, while `(mpfr_custom_init) (s, p)' uses the function. Note 1: MPFR functions may still initialize temporary FP numbers using standard mpfr_init. See Custom Allocation (GNU MP). Note 2: MPFR functions may use the cached functions (mpfr_const_pi for example), even if they are not explicitly called. You have to call `mpfr_free_cache' each time you garbage the memory iff mpfr_init, through GMP Custom Allocation, allocates its memory on the application stack. Note 3: This interface is preliminary. -- Function: size_t mpfr_custom_get_size (mp_prec_t PREC) Return the needed size in bytes to store the significand of a FP number of precision PREC. -- Function: void mpfr_custom_init (void *SIGNIFICAND, mp_prec_t PREC) Initialize a significand of precision PREC. SIGNIFICAND must be an area of `mpfr_custom_get_size (prec)' bytes at least and be suitably aligned for an array of `mp_limb_t'. -- Function: void mpfr_custom_init_set (mpfr_t X, int KIND, mp_exp_t EXP, mp_prec_t PREC, void *SIGNIFICAND) Perform a dummy initialization of a `mpfr_t' and set it to: * if `ABS(kind) == MPFR_NAN_KIND', X is set to NaN; * if `ABS(kind) == MPFR_INF_KIND', X is set to the infinity of sign `sign(kind)'; * if `ABS(kind) == MPFR_ZERO_KIND', X is set to the zero of sign `sign(kind)'; * if `ABS(kind) == MPFR_REGULAR_KIND', X is set to a regular number: `x = sign(kind)*significand*2^exp' In all cases, it uses SIGNIFICAND directly for further computing involving X. It will not allocate anything. A FP number initialized with this function cannot be resized using `mpfr_set_prec', or cleared using `mpfr_clear'! SIGNIFICAND must have been initialized with `mpfr_custom_init' using the same precision PREC. -- Function: int mpfr_custom_get_kind (mpfr_t X) Return the current kind of a `mpfr_t' as used by `mpfr_custom_init_set'. The behavior of this function for any `mpfr_t' not initialized with `mpfr_custom_init_set' is undefined. -- Function: void * mpfr_custom_get_mantissa (mpfr_t X) Return a pointer to the significand used by a `mpfr_t' initialized with `mpfr_custom_init_set'. The behavior of this function for any `mpfr_t' not initialized with `mpfr_custom_init_set' is undefined. -- Function: mp_exp_t mpfr_custom_get_exp (mpfr_t X) Return the exponent of X, assuming that X is a non-zero ordinary number. The return value for NaN, Infinity or Zero is unspecified but does not produce any trap. The behavior of this function for any `mpfr_t' not initialized with `mpfr_custom_init_set' is undefined. -- Function: void mpfr_custom_move (mpfr_t X, void *NEW_POSITION) Inform MPFR that the significand has moved due to a garbage collect and update its new position to `new_position'. However the application has to move the significand and the `mpfr_t' itself. The behavior of this function for any `mpfr_t' not initialized with `mpfr_custom_init_set' is undefined. See the test suite for examples.  File: mpfr.info, Node: Internals, Prev: Custom Interface, Up: MPFR Interface 5.16 Internals ============== The following types and functions were mainly designed for the implementation of MPFR, but may be useful for users too. However no upward compatibility is guaranteed. You may need to include `mpfr-impl.h' to use them. The `mpfr_t' type consists of four fields. * The `_mpfr_prec' field is used to store the precision of the variable (in bits); this is not less than `MPFR_PREC_MIN'. * The `_mpfr_sign' field is used to store the sign of the variable. * The `_mpfr_exp' field stores the exponent. An exponent of 0 means a radix point just above the most significant limb. Non-zero values n are a multiplier 2^n relative to that point. A NaN, an infinity and a zero are indicated by a special value of the exponent. * Finally, the `_mpfr_d' is a pointer to the limbs, least significant limbs stored first. The number of limbs in use is controlled by `_mpfr_prec', namely ceil(`_mpfr_prec'/`mp_bits_per_limb'). Non-singular values always have the most significant bit of the most significant limb set to 1. When the precision does not correspond to a whole number of limbs, the excess bits at the low end of the data are zero.  File: mpfr.info, Node: Contributors, Next: References, Prev: MPFR Interface, Up: Top Contributors ************ The main developers of MPFR are Guillaume Hanrot, Vincent Lefèvre, Patrick Pélissier, Philippe Théveny and Paul Zimmermann. Sylvie Boldo from ENS-Lyon, France, contributed the functions `mpfr_agm' and `mpfr_log'. Emmanuel Jeandel, from ENS-Lyon too, contributed the generic hypergeometric code, as well as the `mpfr_exp3', a first implementation of the sine and cosine, and improved versions of `mpfr_const_log2' and `mpfr_const_pi'. Mathieu Dutour contributed the functions `mpfr_atan' and `mpfr_asin', and a previous version of `mpfr_gamma'; David Daney contributed the hyperbolic and inverse hyperbolic functions, the base-2 exponential, and the factorial function. Fabrice Rouillier contributed the original version of `mul_ui.c', the `gmp_op.c' file, and helped to the Microsoft Windows porting. Jean-Luc Rémy contributed the `mpfr_zeta' code. Ludovic Meunier helped in the design of the `mpfr_erf' code. Damien Stehlé contributed the `mpfr_get_ld_2exp' function. We would like to thank Jean-Michel Muller and Joris van der Hoeven for very fruitful discussions at the beginning of that project, Torbjörn Granlund and Kevin Ryde for their help about design issues, and Nathalie Revol for her careful reading of a previous version of this documentation. Kevin Ryde did a tremendous job for the portability of MPFR in 2002-2004. The development of the MPFR library would not have been possible without the continuous support of INRIA, and of the LORIA (Nancy, France) and LIP (Lyon, France) laboratories. In particular the main authors were or are members of the PolKA, Spaces, Cacao project-teams at LORIA and of the Arenaire project-team at LIP. This project was started during the Fiable (reliable in French) action supported by INRIA, and continued during the AOC action. The development of MPFR was also supported by a grant (202F0659 00 MPN 121) from the Conseil Régional de Lorraine in 2002, and from INRIA by an "associate engineer" grant (2003-2005) and an "opération de développement logiciel" grant (2007-2009).  File: mpfr.info, Node: References, Next: GNU Free Documentation License, Prev: Contributors, Up: Top References ********** * Laurent Fousse, Guillaume Hanrot, Vincent Lefèvre, Patrick Pélissier and Paul Zimmermann, "MPFR: A Multiple-Precision Binary Floating-Point Library With Correct Rounding", ACM Transactions on Mathematical Software, volume 33, issue 2, article 13, 15 pages, 2007, `http://doi.acm.org/10.1145/1236463.1236468'. * Torbjörn Granlund, "GNU MP: The GNU Multiple Precision Arithmetic Library", version 4.2.2, 2007, `http://gmplib.org'. * IEEE standard for binary floating-point arithmetic, Technical Report ANSI-IEEE Standard 754-1985, New York, 1985. Approved March 21, 1985: IEEE Standards Board; approved July 26, 1985: American National Standards Institute, 18 pages. * IEEE Standard for Floating-Point Arithmetic, ANSI-IEEE Standard 754-2008, 2008. Revision of ANSI-IEEE Standard 754-1985, approved June 12, 2008: IEEE Standards Board, 70 pages. * Donald E. Knuth, "The Art of Computer Programming", vol 2, "Seminumerical Algorithms", 2nd edition, Addison-Wesley, 1981. * Jean-Michel Muller, "Elementary Functions, Algorithms and Implementation", Birkhauser, Boston, 2nd edition, 2006.  File: mpfr.info, Node: GNU Free Documentation License, Next: Concept Index, Prev: References, Up: Top Appendix A GNU Free Documentation License ***************************************** Version 1.2, November 2002 Copyright (C) 2000,2001,2002 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. 0. PREAMBLE The purpose of this License is to make a manual, textbook, or other functional and useful document "free" in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others. This License is a kind of "copyleft", which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software. We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference. 1. APPLICABILITY AND DEFINITIONS This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The "Document", below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as "you". You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law. A "Modified Version" of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language. A "Secondary Section" is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them. The "Invariant Sections" are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none. The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words. A "Transparent" copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not "Transparent" is called "Opaque". Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only. The "Title Page" means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, "Title Page" means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text. A section "Entitled XYZ" means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as "Acknowledgements", "Dedications", "Endorsements", or "History".) To "Preserve the Title" of such a section when you modify the Document means that it remains a section "Entitled XYZ" according to this definition. The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License. 2. VERBATIM COPYING You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3. You may also lend copies, under the same conditions stated above, and you may publicly display copies. 3. COPYING IN QUANTITY If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects. If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages. If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public. It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document. 4. MODIFICATIONS You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version: A. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission. B. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement. C. State on the Title page the name of the publisher of the Modified Version, as the publisher. D. Preserve all the copyright notices of the Document. E. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices. F. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below. G. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice. H. Include an unaltered copy of this License. I. Preserve the section Entitled "History", Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled "History" in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence. J. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the "History" section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission. K. For any section Entitled "Acknowledgements" or "Dedications", Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein. L. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles. M. Delete any section Entitled "Endorsements". Such a section may not be included in the Modified Version. N. Do not retitle any existing section to be Entitled "Endorsements" or to conflict in title with any Invariant Section. O. Preserve any Warranty Disclaimers. If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles. You may add a section Entitled "Endorsements", provided it contains nothing but endorsements of your Modified Version by various parties--for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard. You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one. The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version. 5. COMBINING DOCUMENTS You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers. The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work. In the combination, you must combine any sections Entitled "History" in the various original documents, forming one section Entitled "History"; likewise combine any sections Entitled "Acknowledgements", and any sections Entitled "Dedications". You must delete all sections Entitled "Endorsements." 6. COLLECTIONS OF DOCUMENTS You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects. You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document. 7. AGGREGATION WITH INDEPENDENT WORKS A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an "aggregate" if the copyright resulting from the compilation is not used to limit the legal rights of the compilation's users beyond what the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document. If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document's Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate. 8. TRANSLATION Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail. If a section in the Document is Entitled "Acknowledgements", "Dedications", or "History", the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title. 9. TERMINATION You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 10. FUTURE REVISIONS OF THIS LICENSE The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See `http://www.gnu.org/copyleft/'. Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License "or any later version" applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. A.1 ADDENDUM: How to use this License for your documents ======================================================== To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page: Copyright (C) YEAR YOUR NAME. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled ``GNU Free Documentation License''. If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the "with...Texts." line with this: with the Invariant Sections being LIST THEIR TITLES, with the Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation. If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.  File: mpfr.info, Node: Concept Index, Next: Function Index, Prev: GNU Free Documentation License, Up: Top Concept Index ************* [index] * Menu: * Accuracy: MPFR Interface. (line 28) * Arithmetic functions: Basic Arithmetic Functions. (line 3) * Assignment functions: Assignment Functions. (line 3) * Basic arithmetic functions: Basic Arithmetic Functions. (line 3) * Combined initialization and assignment functions: Combined Initialization and Assignment Functions. (line 3) * Comparison functions: Comparison Functions. (line 3) * Compatibility with MPF: Compatibility with MPF. (line 3) * Conditions for copying MPFR: Copying. (line 6) * Conversion functions: Conversion Functions. (line 3) * Copying conditions: Copying. (line 6) * Custom interface: Custom Interface. (line 3) * Exception related functions: Exception Related Functions. (line 3) * FDL, GNU Free Documentation License: GNU Free Documentation License. (line 6) * Float arithmetic functions: Basic Arithmetic Functions. (line 3) * Float comparisons functions: Comparison Functions. (line 3) * Float functions: MPFR Interface. (line 6) * Float input and output functions: Input and Output Functions. (line 3) * Float output functions: Formatted Output Functions. (line 3) * Floating-point functions: MPFR Interface. (line 6) * Floating-point number: MPFR Basics. (line 61) * GNU Free Documentation License: GNU Free Documentation License. (line 6) * I/O functions <1>: Formatted Output Functions. (line 3) * I/O functions: Input and Output Functions. (line 3) * Initialization functions: Initialization Functions. (line 3) * Input functions: Input and Output Functions. (line 3) * Installation: Installing MPFR. (line 6) * Integer related functions: Integer Related Functions. (line 3) * Internals: Internals. (line 3) * intmax_t: MPFR Basics. (line 25) * inttypes.h: MPFR Basics. (line 25) * libmpfr: MPFR Basics. (line 41) * Libraries: MPFR Basics. (line 41) * Libtool: MPFR Basics. (line 47) * Limb: MPFR Basics. (line 94) * Linking: MPFR Basics. (line 41) * Miscellaneous float functions: Miscellaneous Functions. (line 3) * mpfr.h: MPFR Basics. (line 9) * Output functions <1>: Formatted Output Functions. (line 3) * Output functions: Input and Output Functions. (line 3) * Precision <1>: MPFR Interface. (line 20) * Precision: MPFR Basics. (line 75) * Reporting bugs: Reporting Bugs. (line 6) * Rounding mode related functions: Rounding Related Functions. (line 3) * Rounding Modes: MPFR Basics. (line 89) * Special functions: Special Functions. (line 3) * stdarg.h: MPFR Basics. (line 22) * stdint.h: MPFR Basics. (line 25) * stdio.h: MPFR Basics. (line 15) * uintmax_t: MPFR Basics. (line 25)  File: mpfr.info, Node: Function Index, Prev: Concept Index, Up: Top Function and Type Index *********************** [index] * Menu: * mp_prec_t: MPFR Basics. (line 75) * mp_rnd_t: MPFR Basics. (line 89) * mpfr_abs: Basic Arithmetic Functions. (line 177) * mpfr_acos: Special Functions. (line 48) * mpfr_acosh: Special Functions. (line 131) * mpfr_add: Basic Arithmetic Functions. (line 8) * mpfr_add_d: Basic Arithmetic Functions. (line 14) * mpfr_add_q: Basic Arithmetic Functions. (line 18) * mpfr_add_si: Basic Arithmetic Functions. (line 12) * mpfr_add_ui: Basic Arithmetic Functions. (line 10) * mpfr_add_z: Basic Arithmetic Functions. (line 16) * mpfr_agm: Special Functions. (line 221) * mpfr_asin: Special Functions. (line 49) * mpfr_asinh: Special Functions. (line 132) * mpfr_asprintf: Formatted Output Functions. (line 193) * mpfr_atan: Special Functions. (line 50) * mpfr_atan2: Special Functions. (line 60) * mpfr_atanh: Special Functions. (line 133) * mpfr_can_round: Rounding Related Functions. (line 29) * mpfr_cbrt: Basic Arithmetic Functions. (line 107) * mpfr_ceil: Integer Related Functions. (line 8) * mpfr_check_range: Exception Related Functions. (line 38) * mpfr_clear: Initialization Functions. (line 31) * mpfr_clear_erangeflag: Exception Related Functions. (line 111) * mpfr_clear_flags: Exception Related Functions. (line 121) * mpfr_clear_inexflag: Exception Related Functions. (line 110) * mpfr_clear_nanflag: Exception Related Functions. (line 109) * mpfr_clear_overflow: Exception Related Functions. (line 108) * mpfr_clear_underflow: Exception Related Functions. (line 107) * mpfr_clears: Initialization Functions. (line 35) * mpfr_cmp: Comparison Functions. (line 7) * mpfr_cmp_d: Comparison Functions. (line 10) * mpfr_cmp_f: Comparison Functions. (line 14) * mpfr_cmp_ld: Comparison Functions. (line 11) * mpfr_cmp_q: Comparison Functions. (line 13) * mpfr_cmp_si: Comparison Functions. (line 9) * mpfr_cmp_si_2exp: Comparison Functions. (line 31) * mpfr_cmp_ui: Comparison Functions. (line 8) * mpfr_cmp_ui_2exp: Comparison Functions. (line 29) * mpfr_cmp_z: Comparison Functions. (line 12) * mpfr_cmpabs: Comparison Functions. (line 35) * mpfr_const_catalan: Special Functions. (line 242) * mpfr_const_euler: Special Functions. (line 241) * mpfr_const_log2: Special Functions. (line 239) * mpfr_const_pi: Special Functions. (line 240) * mpfr_copysign: Miscellaneous Functions. (line 93) * mpfr_cos: Special Functions. (line 29) * mpfr_cosh: Special Functions. (line 111) * mpfr_cot: Special Functions. (line 37) * mpfr_coth: Special Functions. (line 127) * mpfr_csc: Special Functions. (line 36) * mpfr_csch: Special Functions. (line 126) * mpfr_custom_get_exp: Custom Interface. (line 78) * mpfr_custom_get_kind: Custom Interface. (line 67) * mpfr_custom_get_mantissa: Custom Interface. (line 72) * mpfr_custom_get_size: Custom Interface. (line 38) * mpfr_custom_init: Custom Interface. (line 42) * mpfr_custom_init_set: Custom Interface. (line 48) * mpfr_custom_move: Custom Interface. (line 85) * mpfr_d_div: Basic Arithmetic Functions. (line 82) * mpfr_d_sub: Basic Arithmetic Functions. (line 37) * MPFR_DECL_INIT: Initialization Functions. (line 75) * mpfr_dim: Basic Arithmetic Functions. (line 182) * mpfr_div: Basic Arithmetic Functions. (line 72) * mpfr_div_2exp: Compatibility with MPF. (line 49) * mpfr_div_2si: Basic Arithmetic Functions. (line 197) * mpfr_div_2ui: Basic Arithmetic Functions. (line 195) * mpfr_div_d: Basic Arithmetic Functions. (line 84) * mpfr_div_q: Basic Arithmetic Functions. (line 88) * mpfr_div_si: Basic Arithmetic Functions. (line 80) * mpfr_div_ui: Basic Arithmetic Functions. (line 76) * mpfr_div_z: Basic Arithmetic Functions. (line 86) * mpfr_eint: Special Functions. (line 150) * mpfr_eq: Compatibility with MPF. (line 28) * mpfr_equal_p: Comparison Functions. (line 71) * mpfr_erangeflag_p: Exception Related Functions. (line 129) * mpfr_erf: Special Functions. (line 186) * mpfr_erfc: Special Functions. (line 190) * mpfr_exp: Special Functions. (line 23) * mpfr_exp10: Special Functions. (line 25) * mpfr_exp2: Special Functions. (line 24) * mpfr_expm1: Special Functions. (line 146) * mpfr_fac_ui: Special Functions. (line 138) * mpfr_fits_intmax_p: Conversion Functions. (line 120) * mpfr_fits_sint_p: Conversion Functions. (line 117) * mpfr_fits_slong_p: Conversion Functions. (line 115) * mpfr_fits_sshort_p: Conversion Functions. (line 119) * mpfr_fits_uint_p: Conversion Functions. (line 116) * mpfr_fits_uintmax_p: Conversion Functions. (line 121) * mpfr_fits_ulong_p: Conversion Functions. (line 114) * mpfr_fits_ushort_p: Conversion Functions. (line 118) * mpfr_floor: Integer Related Functions. (line 9) * mpfr_fma: Special Functions. (line 213) * mpfr_fmod: Integer Related Functions. (line 64) * mpfr_fms: Special Functions. (line 217) * mpfr_fprintf: Formatted Output Functions. (line 139) * mpfr_frac: Integer Related Functions. (line 49) * mpfr_free_cache: Special Functions. (line 249) * mpfr_free_str: Conversion Functions. (line 107) * mpfr_gamma: Special Functions. (line 162) * mpfr_get_d: Conversion Functions. (line 7) * mpfr_get_d_2exp: Conversion Functions. (line 20) * mpfr_get_decimal64: Conversion Functions. (line 9) * mpfr_get_default_prec: Initialization Functions. (line 109) * mpfr_get_default_rounding_mode: Rounding Related Functions. (line 11) * mpfr_get_emax: Exception Related Functions. (line 8) * mpfr_get_emax_max: Exception Related Functions. (line 30) * mpfr_get_emax_min: Exception Related Functions. (line 29) * mpfr_get_emin: Exception Related Functions. (line 7) * mpfr_get_emin_max: Exception Related Functions. (line 28) * mpfr_get_emin_min: Exception Related Functions. (line 27) * mpfr_get_exp: Miscellaneous Functions. (line 71) * mpfr_get_f: Conversion Functions. (line 56) * mpfr_get_ld: Conversion Functions. (line 8) * mpfr_get_ld_2exp: Conversion Functions. (line 22) * mpfr_get_patches: Miscellaneous Functions. (line 130) * mpfr_get_prec: Initialization Functions. (line 143) * mpfr_get_si: Conversion Functions. (line 31) * mpfr_get_sj: Conversion Functions. (line 33) * mpfr_get_str: Conversion Functions. (line 62) * mpfr_get_ui: Conversion Functions. (line 32) * mpfr_get_uj: Conversion Functions. (line 34) * mpfr_get_version: Miscellaneous Functions. (line 99) * mpfr_get_z: Conversion Functions. (line 52) * mpfr_get_z_exp: Conversion Functions. (line 44) * mpfr_greater_p: Comparison Functions. (line 54) * mpfr_greaterequal_p: Comparison Functions. (line 57) * mpfr_hypot: Special Functions. (line 230) * mpfr_inexflag_p: Exception Related Functions. (line 128) * mpfr_inf_p: Comparison Functions. (line 42) * mpfr_init: Initialization Functions. (line 51) * mpfr_init2: Initialization Functions. (line 11) * mpfr_init_set: Combined Initialization and Assignment Functions. (line 7) * mpfr_init_set_d: Combined Initialization and Assignment Functions. (line 12) * mpfr_init_set_f: Combined Initialization and Assignment Functions. (line 17) * mpfr_init_set_ld: Combined Initialization and Assignment Functions. (line 14) * mpfr_init_set_q: Combined Initialization and Assignment Functions. (line 16) * mpfr_init_set_si: Combined Initialization and Assignment Functions. (line 11) * mpfr_init_set_str: Combined Initialization and Assignment Functions. (line 23) * mpfr_init_set_ui: Combined Initialization and Assignment Functions. (line 9) * mpfr_init_set_z: Combined Initialization and Assignment Functions. (line 15) * mpfr_inits: Initialization Functions. (line 63) * mpfr_inits2: Initialization Functions. (line 23) * mpfr_inp_str: Input and Output Functions. (line 33) * mpfr_integer_p: Integer Related Functions. (line 90) * mpfr_j0: Special Functions. (line 194) * mpfr_j1: Special Functions. (line 195) * mpfr_jn: Special Functions. (line 196) * mpfr_less_p: Comparison Functions. (line 60) * mpfr_lessequal_p: Comparison Functions. (line 63) * mpfr_lessgreater_p: Comparison Functions. (line 66) * mpfr_lgamma: Special Functions. (line 172) * mpfr_li2: Special Functions. (line 157) * mpfr_lngamma: Special Functions. (line 166) * mpfr_log: Special Functions. (line 16) * mpfr_log10: Special Functions. (line 18) * mpfr_log1p: Special Functions. (line 142) * mpfr_log2: Special Functions. (line 17) * mpfr_max: Miscellaneous Functions. (line 29) * mpfr_min: Miscellaneous Functions. (line 22) * mpfr_modf: Integer Related Functions. (line 56) * mpfr_mul: Basic Arithmetic Functions. (line 51) * mpfr_mul_2exp: Compatibility with MPF. (line 47) * mpfr_mul_2si: Basic Arithmetic Functions. (line 190) * mpfr_mul_2ui: Basic Arithmetic Functions. (line 188) * mpfr_mul_d: Basic Arithmetic Functions. (line 57) * mpfr_mul_q: Basic Arithmetic Functions. (line 61) * mpfr_mul_si: Basic Arithmetic Functions. (line 55) * mpfr_mul_ui: Basic Arithmetic Functions. (line 53) * mpfr_mul_z: Basic Arithmetic Functions. (line 59) * mpfr_nan_p: Comparison Functions. (line 41) * mpfr_nanflag_p: Exception Related Functions. (line 127) * mpfr_neg: Basic Arithmetic Functions. (line 173) * mpfr_nextabove: Miscellaneous Functions. (line 15) * mpfr_nextbelow: Miscellaneous Functions. (line 18) * mpfr_nexttoward: Miscellaneous Functions. (line 7) * mpfr_number_p: Comparison Functions. (line 43) * mpfr_out_str: Input and Output Functions. (line 17) * mpfr_overflow_p: Exception Related Functions. (line 126) * mpfr_pow: Basic Arithmetic Functions. (line 116) * mpfr_pow_si: Basic Arithmetic Functions. (line 120) * mpfr_pow_ui: Basic Arithmetic Functions. (line 118) * mpfr_pow_z: Basic Arithmetic Functions. (line 122) * mpfr_prec_round: Rounding Related Functions. (line 15) * mpfr_print_rnd_mode: Rounding Related Functions. (line 46) * mpfr_printf: Formatted Output Functions. (line 152) * mpfr_random: Miscellaneous Functions. (line 48) * mpfr_random2: Miscellaneous Functions. (line 56) * mpfr_rec_sqrt: Basic Arithmetic Functions. (line 102) * mpfr_reldiff: Compatibility with MPF. (line 39) * mpfr_remainder: Integer Related Functions. (line 66) * mpfr_remquo: Integer Related Functions. (line 68) * mpfr_rint: Integer Related Functions. (line 7) * mpfr_rint_ceil: Integer Related Functions. (line 35) * mpfr_rint_floor: Integer Related Functions. (line 36) * mpfr_rint_round: Integer Related Functions. (line 37) * mpfr_rint_trunc: Integer Related Functions. (line 38) * mpfr_root: Basic Arithmetic Functions. (line 109) * mpfr_round: Integer Related Functions. (line 10) * mpfr_round_prec: Rounding Related Functions. (line 25) * mpfr_sec: Special Functions. (line 35) * mpfr_sech: Special Functions. (line 125) * mpfr_set: Assignment Functions. (line 10) * mpfr_set_d: Assignment Functions. (line 16) * mpfr_set_decimal64: Assignment Functions. (line 19) * mpfr_set_default_prec: Initialization Functions. (line 101) * mpfr_set_default_rounding_mode: Rounding Related Functions. (line 7) * mpfr_set_emax: Exception Related Functions. (line 16) * mpfr_set_emin: Exception Related Functions. (line 15) * mpfr_set_erangeflag: Exception Related Functions. (line 118) * mpfr_set_exp: Miscellaneous Functions. (line 76) * mpfr_set_f: Assignment Functions. (line 22) * mpfr_set_inexflag: Exception Related Functions. (line 117) * mpfr_set_inf: Assignment Functions. (line 129) * mpfr_set_ld: Assignment Functions. (line 17) * mpfr_set_nan: Assignment Functions. (line 130) * mpfr_set_nanflag: Exception Related Functions. (line 116) * mpfr_set_overflow: Exception Related Functions. (line 115) * mpfr_set_prec: Initialization Functions. (line 131) * mpfr_set_prec_raw: Compatibility with MPF. (line 21) * mpfr_set_q: Assignment Functions. (line 21) * mpfr_set_si: Assignment Functions. (line 13) * mpfr_set_si_2exp: Assignment Functions. (line 49) * mpfr_set_sj: Assignment Functions. (line 15) * mpfr_set_sj_2exp: Assignment Functions. (line 53) * mpfr_set_str: Assignment Functions. (line 59) * mpfr_set_ui: Assignment Functions. (line 12) * mpfr_set_ui_2exp: Assignment Functions. (line 47) * mpfr_set_uj: Assignment Functions. (line 14) * mpfr_set_uj_2exp: Assignment Functions. (line 51) * mpfr_set_underflow: Exception Related Functions. (line 114) * mpfr_set_z: Assignment Functions. (line 20) * mpfr_setsign: Miscellaneous Functions. (line 87) * mpfr_sgn: Comparison Functions. (line 49) * mpfr_si_div: Basic Arithmetic Functions. (line 78) * mpfr_si_sub: Basic Arithmetic Functions. (line 33) * mpfr_signbit: Miscellaneous Functions. (line 82) * mpfr_sin: Special Functions. (line 30) * mpfr_sin_cos: Special Functions. (line 42) * mpfr_sinh: Special Functions. (line 112) * mpfr_sinh_cosh: Special Functions. (line 118) * mpfr_snprintf: Formatted Output Functions. (line 177) * mpfr_sprintf: Formatted Output Functions. (line 163) * mpfr_sqr: Basic Arithmetic Functions. (line 68) * mpfr_sqrt: Basic Arithmetic Functions. (line 95) * mpfr_sqrt_ui: Basic Arithmetic Functions. (line 97) * mpfr_strtofr: Assignment Functions. (line 70) * mpfr_sub: Basic Arithmetic Functions. (line 27) * mpfr_sub_d: Basic Arithmetic Functions. (line 39) * mpfr_sub_q: Basic Arithmetic Functions. (line 43) * mpfr_sub_si: Basic Arithmetic Functions. (line 35) * mpfr_sub_ui: Basic Arithmetic Functions. (line 31) * mpfr_sub_z: Basic Arithmetic Functions. (line 41) * mpfr_subnormalize: Exception Related Functions. (line 58) * mpfr_sum: Special Functions. (line 258) * mpfr_swap: Assignment Functions. (line 135) * mpfr_t: MPFR Basics. (line 61) * mpfr_tan: Special Functions. (line 31) * mpfr_tanh: Special Functions. (line 113) * mpfr_trunc: Integer Related Functions. (line 11) * mpfr_ui_div: Basic Arithmetic Functions. (line 74) * mpfr_ui_pow: Basic Arithmetic Functions. (line 126) * mpfr_ui_pow_ui: Basic Arithmetic Functions. (line 124) * mpfr_ui_sub: Basic Arithmetic Functions. (line 29) * mpfr_underflow_p: Exception Related Functions. (line 125) * mpfr_unordered_p: Comparison Functions. (line 75) * mpfr_urandomb: Miscellaneous Functions. (line 35) * mpfr_vasprintf: Formatted Output Functions. (line 195) * MPFR_VERSION: Miscellaneous Functions. (line 102) * MPFR_VERSION_MAJOR: Miscellaneous Functions. (line 103) * MPFR_VERSION_MINOR: Miscellaneous Functions. (line 104) * MPFR_VERSION_NUM: Miscellaneous Functions. (line 122) * MPFR_VERSION_PATCHLEVEL: Miscellaneous Functions. (line 105) * MPFR_VERSION_STRING: Miscellaneous Functions. (line 106) * mpfr_vfprintf: Formatted Output Functions. (line 141) * mpfr_vprintf: Formatted Output Functions. (line 153) * mpfr_vsnprintf: Formatted Output Functions. (line 179) * mpfr_vsprintf: Formatted Output Functions. (line 165) * mpfr_y0: Special Functions. (line 203) * mpfr_y1: Special Functions. (line 204) * mpfr_yn: Special Functions. (line 205) * mpfr_zero_p: Comparison Functions. (line 44) * mpfr_zeta: Special Functions. (line 180) * mpfr_zeta_ui: Special Functions. (line 182)  Tag Table: Node: Top868 Node: Copying2107 Node: Introduction to MPFR3837 Node: Installing MPFR5749 Node: Reporting Bugs9367 Node: MPFR Basics10983 Node: MPFR Interface26220 Node: Initialization Functions28439 Node: Assignment Functions35007 Node: Combined Initialization and Assignment Functions42602 Node: Conversion Functions43884 Node: Basic Arithmetic Functions50591 Node: Comparison Functions59443 Node: Special Functions62865 Node: Input and Output Functions75336 Node: Formatted Output Functions77266 Node: Integer Related Functions86778 Node: Rounding Related Functions91669 Node: Miscellaneous Functions94139 Node: Exception Related Functions100925 Node: Compatibility with MPF107078 Node: Custom Interface109570 Node: Internals113753 Node: Contributors115076 Node: References117241 Node: GNU Free Documentation License118549 Node: Concept Index140992 Node: Function Index146076  End Tag Table  Local Variables: coding: iso-8859-1 End: