/* * Copyright 1998, Joerg Wunsch * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/i386/isa/if_rdp.c,v 1.6.2.2 2000/07/17 21:24:32 archie Exp $ * $DragonFly: src/sys/dev/netif/rdp/if_rdp.c,v 1.12 2004/07/23 07:16:27 joerg Exp $ */ /* * Device driver for RealTek RTL 8002 (`REDP') based pocket-ethernet * adapters, hooked up to a printer port. `rdp' is a shorthand for * REDP since some tools like netstat work best if the interface name * has no more than three letters. * * Driver configuration flags so far: * flags 0x1 -- assume 74S288 EEPROM (default 94C46) * flags 0x2 -- use `slow' mode (mode 3 of the packet driver, default 0) * * Maybe this driver will some day also work with the successor, RTL * 8012 (`AREDP'), which is unfortunately not fully register- * compatible with the 8002. The 8012 offers support for faster * transfer modi like bidirectional SPP and EPP, 64 K x 4 buffer * memory as opposed to 16 K x 4 for the 8002, a multicast filter, and * a builtin multiplexer that allows chaining a printer behind the * ethernet adapter. * * About the only documentation i've been able to find about the RTL * 8002 was the packet driver source code at ftp.realtek.com.tw, so * this driver is somewhat based on the way the packet driver handles * the chip. The exact author of the packet driver is unknown, the * only name that i could find in the source was someone called Chiu, * supposedly an employee of RealTek. So credits to them for that * piece of code which has proven valuable to me. * * Later on, Leo kuo has been very helpful to me * by sending me a readable (PDF) file documenting the RTL 8012, which * helped me to also understand the 8002, as well as by providing me * with the source code of the 8012 packet driver that i haven't been * able to find on the FTP site. A big Thanks! goes here to RealTek * for this kind of service. */ #include "use_rdp.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #endif #ifdef NS #include #include #endif #include #include #include #include #include #include #include "if_rdpreg.h" #include #define IOCTL_CMD_T u_long /* * Debug levels (ORed together): * != 0 - general (bad packets etc.) * 2 - debug EEPROM IO * 4 - debug interrupt status */ #undef DEBUG #define DEBUG 0 /* * rdp_softc: per interface info and status */ struct rdp_softc { struct arpcom arpcom; /* * Ethernet common, always goes first so * a rdp_softc * can be cast into an * arpcom * or into an ifnet *. */ /* * local stuff, somewhat sorted by memory alignment class */ u_short baseaddr; /* IO port address */ u_short txsize; /* tx size for next (buffered) packet, * there's only one additional packet * we can buffer, thus a single variable * ought to be enough */ int txbusy; /* tx is transmitting */ int txbuffered; /* # of packets in tx buffer */ int slow; /* use lpt_control to send data */ u_char irqenbit; /* mirror of current Ctrl_IRQEN */ /* * type of parameter EEPROM; device flags 0x1 selects 74S288 */ enum { EEPROM_93C46, EEPROM_74S288 /* or 82S123 */ } eeprom; }; DECLARE_DUMMY_MODULE(if_rdp); static struct rdp_softc rdp_softc[NRDP]; /* * Since there's no fixed location in the EEPROM about where to find * the ethernet hardware address, we drop a table of valid OUIs here, * and search through the EEPROM until we find a possible valid * Ethernet address. Only the first 16 bits of all possible OUIs are * recorded in the table (as obtained from * http://standards.ieee.org/regauth/oui/oui.txt). */ static u_short allowed_ouis[] = { 0x0000, 0x0001, 0x0002, 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0010, 0x001C, 0x0020, 0x0040, 0x0050, 0x0060, 0x0070, 0x0080, 0x0090, 0x009D, 0x00A0, 0x00AA, 0x00BB, 0x00C0, 0x00CF, 0x00DD, 0x00E0, 0x00E6, 0x0207, 0x021C, 0x0260, 0x0270, 0x029D, 0x02AA, 0x02BB, 0x02C0, 0x02CF, 0x02E6, 0x040A, 0x04E0, 0x0800, 0x08BB, 0x1000, 0x1100, 0x8000, 0xAA00 }; /* * ISA bus support. */ static int rdp_probe (struct isa_device *); static int rdp_attach (struct isa_device *); /* * Required entry points. */ static void rdp_init(void *); static int rdp_ioctl(struct ifnet *, IOCTL_CMD_T, caddr_t, struct ucred *); static void rdp_start(struct ifnet *); static void rdp_reset(struct ifnet *); static void rdp_watchdog(struct ifnet *); static void rdpintr(int); /* * REDP private functions. */ static void rdp_stop(struct rdp_softc *); static void rdp_rint(struct rdp_softc *); static void rdp_get_packet(struct rdp_softc *, unsigned); static u_short rdp_write_mbufs(struct rdp_softc *, struct mbuf *); static int rdp_gethwaddr_93c46(struct rdp_softc *, u_char *); static void rdp_gethwaddr_74s288(struct rdp_softc *, u_char *); static void rdp_93c46_cmd(struct rdp_softc *, u_short, unsigned); static u_short rdp_93c46_read(struct rdp_softc *); struct isa_driver rdpdriver = { rdp_probe, rdp_attach, "rdp", 1 /* we wanna get a chance before lptN */ }; /* * REDP-specific functions. * * They are inlined, thus go first in this file. Together with gcc's * usual optimization, these functions probably come close to the * packet driver's hand-optimized code. ;-) * * Comments are partially obtained from the packet driver as well. * Some of the function names contain register names which don't make * much sense for us, but i've kept them for easier reference in * comparision to the packet driver. * * Some of the functions are currently not used by the driver; it's * not quite clear whether we ever need them at all. They are * supposedly even slower than what is currently implemented as `slow' * mode. Right now, `fast' (default) mode is what the packet driver * calls mode 0, slow mode is mode 3 (writing through lpt_control, * reading twice). * * We should autoprobe the modi, as opposed to making them dependent * on a kernel configuration flag. */ /* * read a nibble from rreg; end-of-data cmd is not issued; * used for general register read. * * Unlike the packet driver's version, i'm shifting the result * by 3 here (as opposed to within the caller's code) for clarity. * -- Joerg */ static __inline u_char RdNib(struct rdp_softc *sc, u_char rreg) { outb(sc->baseaddr + lpt_data, EOC + rreg); outb(sc->baseaddr + lpt_data, RdAddr + rreg); /* write addr */ (void)inb(sc->baseaddr + lpt_status); return (inb(sc->baseaddr + lpt_status) >> 3) & 0x0f; } #if 0 /* * read a byte from MAR register through lpt_data; the low nibble is * read prior to the high one; end-of-read command is not issued; used * for remote DMA in mode 4 + 5 */ static __inline u_char RdByte(struct rdp_softc *sc) { u_char hinib, lonib; outb(sc->baseaddr + lpt_data, RdAddr + MAR); /* cmd for low nibble */ lonib = (inb(sc->baseaddr + lpt_status) >> 3) & 0x0f; outb(sc->baseaddr + lpt_data, RdAddr + MAR + HNib); hinib = (inb(sc->baseaddr + lpt_status) << 1) & 0xf0; return hinib + lonib; } /* * read a byte from MAR register through lpt_data; the low nibble is * read prior to the high one; end-of-read command is not issued; used * for remote DMA in mode 6 + 7 */ static __inline u_char RdByte1(struct rdp_softc *sc) { u_char hinib, lonib; outb(sc->baseaddr + lpt_data, RdAddr + MAR); /* cmd for low nibble */ (void)inb(sc->baseaddr + lpt_status); lonib = (inb(sc->baseaddr + lpt_status) >> 3) & 0x0f; outb(sc->baseaddr + lpt_data, RdAddr + MAR + HNib); (void)inb(sc->baseaddr + lpt_status); hinib = (inb(sc->baseaddr + lpt_status) << 1) & 0xf0; return hinib + lonib; } #endif /* * read a byte from MAR register through lpt_control; the low nibble is * read prior to the high one; end-of-read command is not issued; used * for remote DMA in mode 0 + 1 */ static __inline u_char RdByteA1(struct rdp_softc *sc) { u_char hinib, lonib; outb(sc->baseaddr + lpt_control, Ctrl_LNibRead); lonib = (inb(sc->baseaddr + lpt_status) >> 3) & 0x0f; outb(sc->baseaddr + lpt_control, Ctrl_HNibRead); hinib = (inb(sc->baseaddr + lpt_status) << 1) & 0xf0; return hinib + lonib; } /* * read a byte from MAR register through lpt_control; the low nibble is * read prior to the high one; end-of-read command is not issued; used * for remote DMA in mode 2 + 3 */ static __inline u_char RdByteA2(struct rdp_softc *sc) { u_char hinib, lonib; outb(sc->baseaddr + lpt_control, Ctrl_LNibRead); (void)inb(sc->baseaddr + lpt_status); lonib = (inb(sc->baseaddr + lpt_status) >> 3) & 0x0f; outb(sc->baseaddr + lpt_control, Ctrl_HNibRead); (void)inb(sc->baseaddr + lpt_status); hinib = (inb(sc->baseaddr + lpt_status) << 1) & 0xf0; return hinib + lonib; } /* * End-of-read cmd */ static __inline void RdEnd(struct rdp_softc *sc, u_char rreg) { outb(sc->baseaddr + lpt_data, EOC + rreg); } /* * Write a nibble to a register; end-of-write is issued. * Used for general register write. */ static __inline void WrNib(struct rdp_softc *sc, u_char wreg, u_char wdata) { /* prepare and write address */ outb(sc->baseaddr + lpt_data, EOC + wreg); outb(sc->baseaddr + lpt_data, WrAddr + wreg); outb(sc->baseaddr + lpt_data, WrAddr + wreg); /* prepare and write data */ outb(sc->baseaddr + lpt_data, WrAddr + wdata); outb(sc->baseaddr + lpt_data, wdata); outb(sc->baseaddr + lpt_data, wdata); /* end-of-write */ outb(sc->baseaddr + lpt_data, EOC + wdata); } /* * Write a byte to a register; end-of-write is issued. * Used for general register write. */ static __inline void WrByte(struct rdp_softc *sc, u_char wreg, u_char wdata) { /* prepare and write address */ outb(sc->baseaddr + lpt_data, EOC + wreg); outb(sc->baseaddr + lpt_data, WrAddr + wreg); outb(sc->baseaddr + lpt_data, WrAddr + wreg); /* prepare and write low nibble */ outb(sc->baseaddr + lpt_data, WrAddr + (wdata & 0x0F)); outb(sc->baseaddr + lpt_data, (wdata & 0x0F)); outb(sc->baseaddr + lpt_data, (wdata & 0x0F)); /* prepare and write high nibble */ wdata >>= 4; outb(sc->baseaddr + lpt_data, wdata); outb(sc->baseaddr + lpt_data, wdata + HNib); outb(sc->baseaddr + lpt_data, wdata + HNib); /* end-of-write */ outb(sc->baseaddr + lpt_data, EOC + wdata + HNib); } /* * Write the byte to DRAM via lpt_data; * used for remote DMA write in mode 0 / 2 / 4 */ static __inline void WrByteALToDRAM(struct rdp_softc *sc, u_char val) { outb(sc->baseaddr + lpt_data, val & 0x0F); outb(sc->baseaddr + lpt_data, MkHi(val)); } /* * Write the byte to DRAM via lpt_control; * used for remote DMA write in mode 1 / 3 / 5 */ static __inline void WrByteALToDRAMA(struct rdp_softc *sc, u_char val) { outb(sc->baseaddr + lpt_data, val & 0x0F); outb(sc->baseaddr + lpt_control, Ctrl_LNibRead | sc->irqenbit); outb(sc->baseaddr + lpt_data, val >> 4); outb(sc->baseaddr + lpt_control, Ctrl_HNibRead | sc->irqenbit); } #if 0 /* they could be used for the RAM test */ /* * Write the u_short to DRAM via lpt_data; * used for remote DMA write in mode 0 / 2 / 4 */ static __inline void WrWordbxToDRAM(struct rdp_softc *sc, u_short val) { outb(sc->baseaddr + lpt_data, val & 0x0F); val >>= 4; outb(sc->baseaddr + lpt_data, (val & 0x0F) + HNib); val >>= 4; outb(sc->baseaddr + lpt_data, val & 0x0F); val >>= 4; outb(sc->baseaddr + lpt_data, val + HNib); } /* * Write the u_short to DRAM via lpt_control; * used for remote DMA write in mode 1 / 3 / 5 */ static __inline void WrWordbxToDRAMA(struct rdp_softc *sc, u_short val) { outb(sc->baseaddr + lpt_data, val & 0x0F); outb(sc->baseaddr + lpt_control, Ctrl_LNibRead | sc->irqenbit); val >>= 4; outb(sc->baseaddr + lpt_data, (val & 0x0F) + HNib); outb(sc->baseaddr + lpt_control, Ctrl_HNibRead | sc->irqenbit); val >>= 4; outb(sc->baseaddr + lpt_data, val & 0x0F); outb(sc->baseaddr + lpt_control, Ctrl_LNibRead | sc->irqenbit); val >>= 4; outb(sc->baseaddr + lpt_data, val + HNib); outb(sc->baseaddr + lpt_control, Ctrl_HNibRead | sc->irqenbit); } #endif /* * Determine if the device is present * * on entry: * a pointer to an isa_device struct * on exit: * 0 if device not found * or # of i/o addresses used (if found) */ static int rdp_probe(struct isa_device *isa_dev) { int unit = isa_dev->id_unit; struct rdp_softc *sc = &rdp_softc[unit]; u_char b1, b2; intrmask_t irqmap[3]; u_char sval[3]; if (unit < 0 || unit >= NRDP) return 0; sc->baseaddr = isa_dev->id_iobase; if (isa_dev->id_flags & 1) sc->eeprom = EEPROM_74S288; /* else defaults to 93C46 */ if (isa_dev->id_flags & 2) sc->slow = 1; /* let R/WB = A/DB = CSB = high to be ready for next r/w cycle */ outb(sc->baseaddr + lpt_data, 0xFF); /* DIR = 0 for write mode, IRQEN=0, SLCT=INIT=AUTOFEED=STB=high */ outb(sc->baseaddr + lpt_control, Ctrl_SelData); /* software reset */ WrNib(sc, CMR1 + HNib, MkHi(CMR1_RST)); DELAY(2000); /* is EPLC alive? */ b1 = RdNib(sc, CMR1); RdEnd(sc, CMR1); b2 = RdNib(sc, CMR2) & 0x0f; b2 |= RdNib(sc, CMR2 + HNib) << 4; RdEnd(sc, CMR2 + HNib); /* * After the reset, we expect CMR1 & 7 to be 1 (rx buffer empty), * and CMR2 & 0xf7 to be 0x20 (receive mode set to physical and * broadcasts). */ if (bootverbose) printf("rdp%d: CMR1 = %#x, CMR2 = %#x\n", unit, b1, b2); if ((b1 & (CMR1_BUFE | CMR1_IRQ | CMR1_TRA)) != CMR1_BUFE || (b2 & ~CMR2_IRQINV) != CMR2_AM_PB) return 0; /* * We have found something that could be a RTL 80[01]2, now * see whether we can generate an interrupt. */ cpu_disable_intr(); /* * Test whether our configured IRQ is working. * * Set to no acception mode + IRQout, then enable RxE + TxE, * then cause RBER (by advancing the read pointer although * the read buffer is empty) to generate an interrupt. */ WrByte(sc, CMR2, CMR2_IRQOUT); WrNib(sc, CMR1 + HNib, MkHi(CMR1_TE | CMR1_RE)); WrNib(sc, CMR1, CMR1_RDPAC); DELAY(1000); irqmap[0] = isa_irq_pending(); sval[0] = inb(sc->baseaddr + lpt_status); /* allow IRQs to pass the parallel interface */ outb(sc->baseaddr + lpt_control, Ctrl_IRQEN + Ctrl_SelData); DELAY(1000); /* generate interrupt */ WrNib(sc, IMR + HNib, MkHi(ISR_RBER)); DELAY(1000); irqmap[1] = isa_irq_pending(); sval[1] = inb(sc->baseaddr + lpt_status); /* de-assert and disable IRQ */ WrNib(sc, IMR + HNib, MkHi(0)); (void)inb(sc->baseaddr + lpt_status); /* might be necessary to clear IRQ */ DELAY(1000); irqmap[2] = isa_irq_pending(); sval[2] = inb(sc->baseaddr + lpt_status); WrNib(sc, CMR1 + HNib, MkHi(0)); outb(sc->baseaddr + lpt_control, Ctrl_SelData); WrNib(sc, CMR2, CMR2_IRQINV); cpu_enable_intr(); if (bootverbose) printf("rdp%d: irq maps / lpt status " "%#x/%#x - %#x/%#x - %#x/%#x (id_irq %#x)\n", unit, irqmap[0], sval[0], irqmap[1], sval[1], irqmap[2], sval[2], isa_dev->id_irq); if ((irqmap[1] & isa_dev->id_irq) == 0) { printf("rdp%d: configured IRQ (%d) cannot be asserted " "by device", unit, ffs(isa_dev->id_irq) - 1); if (irqmap[1]) printf(" (probable IRQ: %d)", ffs(irqmap[1]) - 1); printf("\n"); return 0; } /* * XXX should do RAMtest here */ switch (sc->eeprom) { case EEPROM_93C46: if (rdp_gethwaddr_93c46(sc, sc->arpcom.ac_enaddr) == 0) { printf("rdp%d: failed to find a valid hardware " "address in EEPROM\n", unit); return 0; } break; case EEPROM_74S288: rdp_gethwaddr_74s288(sc, sc->arpcom.ac_enaddr); break; } return lpt_control + 1; } /* * Install interface into kernel networking data structures */ static int rdp_attach(struct isa_device *isa_dev) { int unit = isa_dev->id_unit; struct rdp_softc *sc = &rdp_softc[unit]; struct ifnet *ifp = &sc->arpcom.ac_if; isa_dev->id_ointr = rdpintr; /* * Reset interface */ rdp_stop(sc); /* * Initialize ifnet structure */ ifp->if_softc = sc; if_initname(ifp, "rdp", unit); ifp->if_start = rdp_start; ifp->if_ioctl = rdp_ioctl; ifp->if_watchdog = rdp_watchdog; ifp->if_init = rdp_init; ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX; /* * Attach the interface */ ether_ifattach(ifp, sc->arpcom.ac_enaddr); /* * Print additional info when attached */ printf("%s: RealTek RTL%s pocket ethernet, EEPROM %s, %s mode\n", ifp->if_xname, "8002", /* hook for 8012 */ sc->eeprom == EEPROM_93C46? "93C46": "74S288", sc->slow? "slow": "fast"); return 1; } /* * Reset interface. */ static void rdp_reset(struct ifnet *ifp) { struct rdp_softc *sc = ifp->if_softc; int s; s = splimp(); /* * Stop interface and re-initialize. */ rdp_stop(sc); rdp_init(sc); (void) splx(s); } /* * Take interface offline. */ static void rdp_stop(struct rdp_softc *sc) { sc->txbusy = sc->txbusy = 0; /* disable printer interface interrupts */ sc->irqenbit = 0; outb(sc->baseaddr + lpt_control, Ctrl_SelData); outb(sc->baseaddr + lpt_data, 0xff); /* reset the RTL 8002 */ WrNib(sc, CMR1 + HNib, MkHi(CMR1_RST)); DELAY(100); } /* * Device timeout/watchdog routine. Entered if the device neglects to * generate an interrupt after a transmit has been started on it. */ static void rdp_watchdog(struct ifnet *ifp) { log(LOG_ERR, "%s: device timeout\n", ifp->if_xname); ifp->if_oerrors++; rdp_reset(ifp); } /* * Initialize device. */ static void rdp_init(void *xsc) { struct rdp_softc *sc = xsc; struct ifnet *ifp = &sc->arpcom.ac_if; int i, s; u_char reg; /* address not known */ if (TAILQ_EMPTY(&ifp->if_addrhead)) return; s = splimp(); ifp->if_timer = 0; /* program ethernet ID into the chip */ for (i = 0, reg = IDR0; i < 6; i++, reg++) WrByte(sc, reg, sc->arpcom.ac_enaddr[i]); /* set accept mode */ WrNib(sc, CMR2 + HNib, MkHi((ifp->if_flags & IFF_PROMISC)? CMR2_AM_ALL: CMR2_AM_PB)); /* enable tx and rx */ WrNib(sc, CMR1 + HNib, MkHi(CMR1_TE | CMR1_RE)); /* allow interrupts to happen */ WrNib(sc, CMR2, CMR2_IRQOUT | CMR2_IRQINV); WrNib(sc, IMR, ISR_TOK | ISR_TER | ISR_ROK | ISR_RER); WrNib(sc, IMR + HNib, MkHi(ISR_RBER)); /* allow IRQs to pass the parallel interface */ sc->irqenbit = Ctrl_IRQEN; outb(sc->baseaddr + lpt_control, sc->irqenbit + Ctrl_SelData); /* clear all flags */ sc->txbusy = sc->txbuffered = 0; /* * Set 'running' flag, and clear output active flag. */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; /* * ...and attempt to start output */ rdp_start(ifp); (void) splx(s); } /* * Start output on interface. * We make two assumptions here: * 1) that the current priority is set to splimp _before_ this code * is called *and* is returned to the appropriate priority after * return * 2) that the IFF_OACTIVE flag is checked before this code is called * (i.e. that the output part of the interface is idle) */ static void rdp_start(struct ifnet *ifp) { struct rdp_softc *sc = ifp->if_softc; struct mbuf *m; int len; outloop: /* * See if there is room to put another packet in the buffer. */ if (sc->txbuffered) { /* * No room. Indicate this to the outside world and exit. */ ifp->if_flags |= IFF_OACTIVE; return; } IF_DEQUEUE(&ifp->if_snd, m); if (m == 0) { /* * We are using the !OACTIVE flag to indicate to the outside * world that we can accept an additional packet rather than * that the transmitter is _actually_ active. Indeed, the * transmitter may be active, but if we haven't filled all the * buffers with data then we still want to accept more. */ ifp->if_flags &= ~IFF_OACTIVE; return; } /* * Copy the mbuf chain into the transmit buffer */ len = rdp_write_mbufs(sc, m); if (len == 0) goto outloop; /* ensure minimal valid ethernet length */ len = max(len, (ETHER_MIN_LEN-ETHER_CRC_LEN)); /* * Actually start the transceiver. Set a timeout in case the * Tx interrupt never arrives. */ if (!sc->txbusy) { WrNib(sc, TBCR1, len >> 8); WrByte(sc, TBCR0, len & 0xff); WrNib(sc, CMR1, CMR1_TRA); sc->txbusy = 1; ifp->if_timer = 2; } else { sc->txbuffered = 1; sc->txsize = len; } /* * Tap off here if there is a bpf listener. */ if (ifp->if_bpf) { bpf_mtap(ifp, m); } m_freem(m); /* * Loop back to the top to possibly buffer more packets */ goto outloop; } /* * Process an ioctl request. */ static int rdp_ioctl(struct ifnet *ifp, IOCTL_CMD_T command, caddr_t data, struct ucred *ur) { struct rdp_softc *sc = ifp->if_softc; int s, error = 0; s = splimp(); switch (command) { case SIOCSIFADDR: case SIOCGIFADDR: case SIOCSIFMTU: error = ether_ioctl(ifp, command, data); break; case SIOCSIFFLAGS: /* * If the interface is marked up and stopped, then start it. * If it is marked down and running, then stop it. */ if (ifp->if_flags & IFF_UP) { if ((ifp->if_flags & IFF_RUNNING) == 0) rdp_init(sc); } else { if (ifp->if_flags & IFF_RUNNING) { rdp_stop(sc); ifp->if_flags &= ~IFF_RUNNING; } } /* * Promiscuous flag may have changed, propagage this * to the NIC. */ if (ifp->if_flags & IFF_UP) WrNib(sc, CMR2 + HNib, MkHi((ifp->if_flags & IFF_PROMISC)? CMR2_AM_ALL: CMR2_AM_PB)); break; case SIOCADDMULTI: case SIOCDELMULTI: /* * Multicast list has changed; we don't support it. */ error = ENOTTY; break; default: error = EINVAL; } (void) splx(s); return (error); } /* * External interrupt service routine. */ void rdpintr(int unit) { struct rdp_softc *sc = rdp_softc + unit; struct ifnet *ifp = (struct ifnet *)sc; u_char isr, tsr, rsr, colls; /* disable interrupts, so SD3 can be routed to the pin */ sc->irqenbit = 0; outb(sc->baseaddr + lpt_control, Ctrl_SelData); WrNib(sc, CMR2, CMR2_IRQINV); /* * loop until there are no more new interrupts */ for (;;) { isr = RdNib(sc, ISR); isr |= RdNib(sc, ISR + HNib) << 4; RdEnd(sc, ISR + HNib); if (isr == 0) break; #if DEBUG & 4 printf("rdp%d: ISR = %#x\n", unit, isr); #endif /* * Clear the pending interrupt bits. */ WrNib(sc, ISR, isr & 0x0f); if (isr & 0xf0) WrNib(sc, ISR + HNib, MkHi(isr)); /* * Handle transmitter interrupts. */ if (isr & (ISR_TOK | ISR_TER)) { tsr = RdNib(sc, TSR); RdEnd(sc, TSR); #if DEBUG & 4 if (isr & ISR_TER) printf("rdp%d: tsr %#x\n", unit, tsr); #endif if (tsr & TSR_TABT) ifp->if_oerrors++; else /* * Update total number of successfully * transmitted packets. */ ifp->if_opackets++; if (tsr & TSR_COL) { colls = RdNib(sc, COLR); RdEnd(sc, COLR); ifp->if_collisions += colls; } /* * reset tx busy and output active flags */ sc->txbusy = 0; ifp->if_flags &= ~IFF_OACTIVE; /* * If we had already queued up another packet, * start sending it now. */ if (sc->txbuffered) { WrNib(sc, TBCR1, sc->txsize >> 8); WrByte(sc, TBCR0, sc->txsize & 0xff); WrNib(sc, CMR1, CMR1_TRA); sc->txbusy = 1; sc->txbuffered = 0; ifp->if_timer = 2; } else { /* * clear watchdog timer */ ifp->if_timer = 0; } } /* * Handle receiver interrupts */ if (isr & (ISR_ROK | ISR_RER | ISR_RBER)) { rsr = RdNib(sc, RSR); rsr |= RdNib(sc, RSR + HNib) << 4; RdEnd(sc, RSR + HNib); #if DEBUG & 4 if (isr & (ISR_RER | ISR_RBER)) printf("rdp%d: rsr %#x\n", unit, rsr); #endif if (rsr & (RSR_PUN | RSR_POV)) { printf("rdp%d: rsr %#x, resetting\n", unit, rsr); rdp_reset(ifp); break; } if (rsr & RSR_BUFO) /* * CRC and FA errors are recorded in * rdp_rint() on a per-packet basis */ ifp->if_ierrors++; if (isr & (ISR_ROK | ISR_RER)) rdp_rint(sc); } /* * If it looks like the transmitter can take more data, * attempt to start output on the interface. This is done * after handling the receiver to give the receiver priority. */ if ((ifp->if_flags & IFF_OACTIVE) == 0) rdp_start(ifp); } /* re-enable interrupts */ WrNib(sc, CMR2, CMR2_IRQOUT | CMR2_IRQINV); sc->irqenbit = Ctrl_IRQEN; outb(sc->baseaddr + lpt_control, Ctrl_SelData + sc->irqenbit); } /* * Ethernet interface receiver interrupt. */ static void rdp_rint(struct rdp_softc *sc) { struct ifnet *ifp = &sc->arpcom.ac_if; struct rdphdr rh; u_short len; size_t i; u_char *packet_ptr, b, status; int excessive_bad_pkts = 0; /* * Fetch the packets from the NIC's buffer. */ for (;;) { b = RdNib(sc, CMR1); RdEnd(sc, CMR1); if (b & CMR1_BUFE) /* no more packets */ break; /* first, obtain the buffer header */ outb(sc->baseaddr + lpt_data, MAR + EOC); /* prepare addr */ outb(sc->baseaddr + lpt_control, Ctrl_LNibRead); outb(sc->baseaddr + lpt_data, MAR + RdAddr + HNib); packet_ptr = (u_char *)&rh; if (sc->slow) for (i = 0; i < sizeof rh; i++, packet_ptr++) *packet_ptr = RdByteA2(sc); else for (i = 0; i < sizeof rh; i++, packet_ptr++) *packet_ptr = RdByteA1(sc); RdEnd(sc, MAR + HNib); outb(sc->baseaddr + lpt_control, Ctrl_SelData); len = rh.pktlen - ETHER_CRC_LEN; status = rh.status; if ((status & (RSR_ROK | RSR_CRC | RSR_FA)) != RSR_ROK || len > (ETHER_MAX_LEN - ETHER_CRC_LEN) || len < (ETHER_MIN_LEN - ETHER_CRC_LEN) || len > MCLBYTES) { #if DEBUG printf("%s: bad packet in buffer, " "len %d, status %#x\n", ifp->if_xname, (int)len, (int)status); #endif ifp->if_ierrors++; /* rx jump packet */ WrNib(sc, CMR1, CMR1_RDPAC); if (++excessive_bad_pkts > 5) { /* * the chip seems to be stuck, we are * probably seeing the same bad packet * over and over again */ #if DEBUG printf("%s: resetting due to an " "excessive number of bad packets\n", ifp->if_xname); #endif rdp_reset(ifp); return; } continue; } /* * Go get packet. */ excessive_bad_pkts = 0; rdp_get_packet(sc, len); ifp->if_ipackets++; } } /* * Retreive packet from NIC memory and send to the next level up via * ether_input(). */ static void rdp_get_packet(struct rdp_softc *sc, unsigned len) { struct ifnet *ifp = &sc->arpcom.ac_if; struct mbuf *m; u_char *packet_ptr; size_t s; /* Allocate a header mbuf */ MGETHDR(m, MB_DONTWAIT, MT_DATA); if (m == NULL) return; m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = len; /* * We always put the received packet in a single buffer - * either with just an mbuf header or in a cluster attached * to the header. The +2 is to compensate for the alignment * fixup below. */ if ((len + 2) > MHLEN) { /* Attach an mbuf cluster */ MCLGET(m, MB_DONTWAIT); /* Insist on getting a cluster */ if ((m->m_flags & M_EXT) == 0) { m_freem(m); return; } } /* * The +2 is to longword align the start of the real packet. * This is important for NFS. */ m->m_data += 2; /* * Get packet, including link layer address, from interface. */ outb(sc->baseaddr + lpt_control, Ctrl_LNibRead); outb(sc->baseaddr + lpt_data, RdAddr + MAR); packet_ptr = mtod(m, u_char *); if (sc->slow) for (s = 0; s < len; s++, packet_ptr++) *packet_ptr = RdByteA2(sc); else for (s = 0; s < len; s++, packet_ptr++) *packet_ptr = RdByteA1(sc); RdEnd(sc, MAR + HNib); outb(sc->baseaddr + lpt_control, Ctrl_SelData); WrNib(sc, CMR1, CMR1_RDPAC); (*ifp->if_input)(ifp, m); } /* * Write an mbuf chain to the NIC's tx buffer. */ static u_short rdp_write_mbufs(struct rdp_softc *sc, struct mbuf *m) { u_short total_len; struct mbuf *mp; u_char *dp, b; int i; /* First, count up the total number of bytes to copy */ for (total_len = 0, mp = m; mp; mp = mp->m_next) total_len += mp->m_len; if (total_len == 0) return 0; outb(sc->baseaddr + lpt_data, MAR | EOC); /* * Transfer the mbuf chain to the NIC memory. */ if (sc->slow) { /* writing the first byte is complicated */ outb(sc->baseaddr + lpt_control, Ctrl_LNibRead | sc->irqenbit); outb(sc->baseaddr + lpt_data, MAR | WrAddr); b = *(u_char *)m->m_data; outb(sc->baseaddr + lpt_data, (b & 0x0f) | 0x40); outb(sc->baseaddr + lpt_data, b & 0x0f); outb(sc->baseaddr + lpt_data, b >> 4); outb(sc->baseaddr + lpt_control, Ctrl_HNibRead | sc->irqenbit); /* advance the mbuf pointer */ mp = m; m->m_len--; m->m_data++; /* write the remaining bytes */ while (m) { for (i = 0, dp = (u_char *)m->m_data; i < m->m_len; i++, dp++) WrByteALToDRAMA(sc, *dp); m = m->m_next; } /* * restore old mbuf in case we have to hand it off to * BPF again */ m = mp; m->m_len++; m->m_data--; /* the RTL 8002 requires an even byte-count remote DMA */ if (total_len & 1) WrByteALToDRAMA(sc, 0); } else { outb(sc->baseaddr + lpt_data, MAR | WrAddr); while (m) { for (i = 0, dp = (u_char *)m->m_data; i < m->m_len; i++, dp++) WrByteALToDRAM(sc, *dp); m = m->m_next; } /* the RTL 8002 requires an even byte-count remote DMA */ if (total_len & 1) WrByteALToDRAM(sc, 0); } outb(sc->baseaddr + lpt_data, 0xff); outb(sc->baseaddr + lpt_control, Ctrl_HNibRead | Ctrl_SelData | sc->irqenbit); return total_len; } /* * Read the designated ethernet hardware address out of a 93C46 * (serial) EEPROM. * Note that the 93C46 uses 16-bit words in big-endian notation. */ static int rdp_gethwaddr_93c46(struct rdp_softc *sc, u_char *etheraddr) { int i, magic; size_t j = 0; u_short w; WrNib(sc, CMR2, CMR2_PAGE | CMR2_IRQINV); /* select page 1 */ /* * The original RealTek packet driver had the ethernet address * starting at EEPROM address 0. Other vendors seem to have * gone `creative' here -- while they didn't do anything else * than changing a few strings in the entire driver, compared * to the RealTek version, they also moved out the ethernet * address to a different location in the EEPROM, so the * original RealTek driver won't work correctly with them, and * vice versa. Sounds pretty cool, eh? $@%&! * * Anyway, we walk through the EEPROM, until we find some * allowable value based upon our table of IEEE OUI assignments. */ for (i = magic = 0; magic < 3 && i < 32; i++) { /* read cmd (+ 6 bit address) */ rdp_93c46_cmd(sc, 0x180 + i, 10); w = rdp_93c46_read(sc); switch (magic) { case 0: for (j = 0; j < sizeof allowed_ouis / sizeof(u_short); j++) if (w == allowed_ouis[j]) { etheraddr[0] = (w >> 8) & 0xff; etheraddr[1] = w & 0xff; magic++; break; } break; case 1: /* * If the first two bytes have been 00:00, we * discard the match iff the next two bytes * are also 00:00, so we won't get fooled by * an EEPROM that has been filled with zeros. * This in theory would disallow 64 K of legal * addresses assigned to Xerox, but it's * almost certain that those addresses haven't * been used for RTL80[01]2 chips anyway. */ if ((etheraddr[0] | etheraddr[1]) == 0 && w == 0) { magic--; break; } etheraddr[2] = (w >> 8) & 0xff; etheraddr[3] = w & 0xff; magic++; break; case 2: etheraddr[4] = (w >> 8) & 0xff; etheraddr[5] = w & 0xff; magic++; break; } } WrNib(sc, CMR2, CMR2_IRQINV); /* back to page 0 */ return magic == 3; } /* * Read the designated ethernet hardware address out of a 74S288 * EEPROM. * * This is untested, since i haven't seen any adapter actually using * a 74S288. In the RTL 8012, only the serial EEPROM (94C46) is * supported anymore. */ static void rdp_gethwaddr_74s288(struct rdp_softc *sc, u_char *etheraddr) { int i; u_char b; WrNib(sc, CMR2, CMR2_PAGE | CMR2_IRQINV); /* select page 1 */ for (i = 0; i < 6; i++) { WrNib(sc, PCMR, i & 0x0f); /* lower 4 bit of addr */ WrNib(sc, PCMR + HNib, HNib + 4); /* upper 2 bit addr + /CS */ WrNib(sc, PCMR + HNib, HNib); /* latch data now */ b = RdNib(sc, PDR) & 0x0f; b |= (RdNib(sc, PDR + HNib) & 0x0f) << 4; etheraddr[i] = b; } RdEnd(sc, PDR + HNib); WrNib(sc, CMR2, CMR2_IRQINV); /* reselect page 0 */ } /* * Send nbits of data (starting with MSB) out to the 93c46 as a * command. Assumes register page 1 has already been selected. */ static void rdp_93c46_cmd(struct rdp_softc *sc, u_short data, unsigned nbits) { u_short mask = 1 << (nbits - 1); unsigned i; u_char b; #if DEBUG & 2 printf("rdp_93c46_cmd(): "); #endif for (i = 0; i < nbits; i++, mask >>= 1) { b = HNib + PCMR_SK + PCMR_CS; if (data & mask) b += PCMR_DO; #if DEBUG & 2 printf("%d", b & 1); #endif WrNib(sc, PCMR + HNib, b); DELAY(1); WrNib(sc, PCMR + HNib, b & ~PCMR_SK); DELAY(1); } #if DEBUG & 2 printf("\n"); #endif } /* * Read one word of data from the 93c46. Actually, we have to read * 17 bits, and discard the very first bit. Assumes register page 1 * to be selected as well. */ static u_short rdp_93c46_read(struct rdp_softc *sc) { u_short data = 0; u_char b; int i; #if DEBUG & 2 printf("rdp_93c46_read(): "); #endif for (i = 0; i < 17; i++) { WrNib(sc, PCMR + HNib, PCMR_SK + PCMR_CS + HNib); DELAY(1); WrNib(sc, PCMR + HNib, PCMR_CS + HNib); DELAY(1); b = RdNib(sc, PDR); data <<= 1; if (b & 1) data |= 1; #if DEBUG & 2 printf("%d", b & 1); #endif RdEnd(sc, PDR); DELAY(1); } #if DEBUG & 2 printf("\n"); #endif /* end of cycle */ WrNib(sc, PCMR + HNib, PCMR_SK + HNib); DELAY(1); return data; }