/* * Copyright (c) 1997, 1998 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: src/sys/pci/if_wbreg.h,v 1.7 1999/08/30 23:08:30 wpaul Exp $ * $DragonFly: src/sys/dev/netif/wb/if_wbreg.h,v 1.5 2005/05/28 22:15:07 joerg Exp $ */ /* * Winbond register definitions. */ #define WB_BUSCTL 0x00 /* bus control */ #define WB_TXSTART 0x04 /* tx start demand */ #define WB_RXSTART 0x08 /* rx start demand */ #define WB_RXADDR 0x0C /* rx descriptor list start addr */ #define WB_TXADDR 0x10 /* tx descriptor list start addr */ #define WB_ISR 0x14 /* interrupt status register */ #define WB_NETCFG 0x18 /* network config register */ #define WB_IMR 0x1C /* interrupt mask */ #define WB_FRAMESDISCARDED 0x20 /* # of discarded frames */ #define WB_SIO 0x24 /* MII and ROM/EEPROM access */ #define WB_BOOTROMADDR 0x28 #define WB_TIMER 0x2C /* general timer */ #define WB_CURRXCTL 0x30 /* current RX descriptor */ #define WB_CURRXBUF 0x34 /* current RX buffer */ #define WB_MAR0 0x38 /* multicast filter 0 */ #define WB_MAR1 0x3C /* multicast filter 1 */ #define WB_NODE0 0x40 /* station address 0 */ #define WB_NODE1 0x44 /* station address 1 */ #define WB_BOOTROMSIZE 0x48 /* boot ROM size */ #define WB_CURTXCTL 0x4C /* current TX descriptor */ #define WB_CURTXBUF 0x50 /* current TX buffer */ /* * Bus control bits. */ #define WB_BUSCTL_RESET 0x00000001 #define WB_BUSCTL_ARBITRATION 0x00000002 #define WB_BUSCTL_SKIPLEN 0x0000007C #define WB_BUSCTL_BUF_BIGENDIAN 0x00000080 #define WB_BUSCTL_BURSTLEN 0x00003F00 #define WB_BUSCTL_CACHEALIGN 0x0000C000 #define WB_BUSCTL_DES_BIGENDIAN 0x00100000 #define WB_BUSCTL_WAIT 0x00200000 #define WB_BUSCTL_MUSTBEONE 0x00400000 #define WB_SKIPLEN_1LONG 0x00000004 #define WB_SKIPLEN_2LONG 0x00000008 #define WB_SKIPLEN_3LONG 0x00000010 #define WB_SKIPLEN_4LONG 0x00000020 #define WB_SKIPLEN_5LONG 0x00000040 #define WB_CACHEALIGN_NONE 0x00000000 #define WB_CACHEALIGN_8LONG 0x00004000 #define WB_CACHEALIGN_16LONG 0x00008000 #define WB_CACHEALIGN_32LONG 0x0000C000 #define WB_BURSTLEN_USECA 0x00000000 #define WB_BURSTLEN_1LONG 0x00000100 #define WB_BURSTLEN_2LONG 0x00000200 #define WB_BURSTLEN_4LONG 0x00000400 #define WB_BURSTLEN_8LONG 0x00000800 #define WB_BURSTLEN_16LONG 0x00001000 #define WB_BURSTLEN_32LONG 0x00002000 #define WB_BUSCTL_CONFIG (WB_CACHEALIGN_8LONG|WB_SKIPLEN_3LONG| \ WB_BURSTLEN_8LONG) /* * Interrupt status bits. */ #define WB_ISR_TX_OK 0x00000001 #define WB_ISR_TX_IDLE 0x00000002 #define WB_ISR_TX_NOBUF 0x00000004 #define WB_ISR_RX_EARLY 0x00000008 #define WB_ISR_RX_ERR 0x00000010 #define WB_ISR_TX_UNDERRUN 0x00000020 #define WB_ISR_RX_OK 0x00000040 #define WB_ISR_RX_NOBUF 0x00000080 #define WB_ISR_RX_IDLE 0x00000100 #define WB_ISR_TX_EARLY 0x00000400 #define WB_ISR_TIMER_EXPIRED 0x00000800 #define WB_ISR_BUS_ERR 0x00002000 #define WB_ISR_ABNORMAL 0x00008000 #define WB_ISR_NORMAL 0x00010000 #define WB_ISR_RX_STATE 0x000E0000 #define WB_ISR_TX_STATE 0x00700000 #define WB_ISR_BUSERRTYPE 0x03800000 /* * The RX_STATE and TX_STATE fields are not described anywhere in the * Winbond datasheet, however it appears that the Winbond chip is an * attempt at a DEC 'tulip' clone, hence the ISR register is identical * to that of the tulip chip and we can steal the bit definitions from * the tulip documentation. */ #define WB_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */ #define WB_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */ #define WB_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */ #define WB_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */ #define WB_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */ #define WB_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */ #define WB_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */ #define WB_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */ #define WB_TXSTATE_RESET 0x00000000 /* 000 - reset */ #define WB_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */ #define WB_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */ #define WB_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */ #define WB_TXSTATE_RSVD 0x00400000 /* 100 - reserved */ #define WB_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */ #define WB_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */ #define WB_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */ /* * Network config bits. */ #define WB_NETCFG_RX_ON 0x00000002 #define WB_NETCFG_RX_ALLPHYS 0x00000008 #define WB_NETCFG_RX_MULTI 0x00000010 #define WB_NETCFG_RX_BROAD 0x00000020 #define WB_NETCFG_RX_RUNT 0x00000040 #define WB_NETCFG_RX_ERR 0x00000080 #define WB_NETCFG_FULLDUPLEX 0x00000200 #define WB_NETCFG_LOOPBACK 0x00000C00 #define WB_NETCFG_TX_ON 0x00002000 #define WB_NETCFG_TX_THRESH 0x001FC000 #define WB_NETCFG_RX_EARLYTHRSH 0x1FE00000 #define WB_NETCFG_100MBPS 0x20000000 #define WB_NETCFG_TX_EARLY_ON 0x40000000 #define WB_NETCFG_RX_EARLY_ON 0x80000000 /* * The tx threshold can be adjusted in increments of 32 bytes. */ #define WB_TXTHRESH(x) ((x >> 5) << 14) #define WB_TXTHRESH_CHUNK 32 #define WB_TXTHRESH_INIT 0 /*72*/ /* * Interrupt mask bits. */ #define WB_IMR_TX_OK 0x00000001 #define WB_IMR_TX_IDLE 0x00000002 #define WB_IMR_TX_NOBUF 0x00000004 #define WB_IMR_RX_EARLY 0x00000008 #define WB_IMR_RX_ERR 0x00000010 #define WB_IMR_TX_UNDERRUN 0x00000020 #define WB_IMR_RX_OK 0x00000040 #define WB_IMR_RX_NOBUF 0x00000080 #define WB_IMR_RX_IDLE 0x00000100 #define WB_IMR_TX_EARLY 0x00000400 #define WB_IMR_TIMER_EXPIRED 0x00000800 #define WB_IMR_BUS_ERR 0x00002000 #define WB_IMR_ABNORMAL 0x00008000 #define WB_IMR_NORMAL 0x00010000 #define WB_INTRS \ (WB_IMR_RX_OK|WB_IMR_TX_OK|WB_IMR_RX_NOBUF|WB_IMR_RX_ERR| \ WB_IMR_TX_NOBUF|WB_IMR_TX_UNDERRUN|WB_IMR_BUS_ERR| \ WB_IMR_ABNORMAL|WB_IMR_NORMAL|WB_IMR_TX_EARLY) /* * Serial I/O (EEPROM/ROM) bits. */ #define WB_SIO_EE_CS 0x00000001 /* EEPROM chip select */ #define WB_SIO_EE_CLK 0x00000002 /* EEPROM clock */ #define WB_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */ #define WB_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */ #define WB_SIO_ROMDATA4 0x00000010 #define WB_SIO_ROMDATA5 0x00000020 #define WB_SIO_ROMDATA6 0x00000040 #define WB_SIO_ROMDATA7 0x00000080 #define WB_SIO_ROMCTL_WRITE 0x00000200 #define WB_SIO_ROMCTL_READ 0x00000400 #define WB_SIO_EESEL 0x00000800 #define WB_SIO_MII_CLK 0x00010000 /* MDIO clock */ #define WB_SIO_MII_DATAIN 0x00020000 /* MDIO data out */ #define WB_SIO_MII_DIR 0x00040000 /* MDIO dir */ #define WB_SIO_MII_DATAOUT 0x00080000 /* MDIO data in */ #define WB_EECMD_WRITE 0x140 #define WB_EECMD_READ 0x180 #define WB_EECMD_ERASE 0x1c0 /* * Winbond TX/RX descriptor structure. */ struct wb_desc { uint32_t wb_status; uint32_t wb_ctl; uint32_t wb_ptr1; uint32_t wb_ptr2; }; #define wb_data wb_ptr1 #define wb_next wb_ptr2 #define WB_RXSTAT_CRCERR 0x00000002 #define WB_RXSTAT_DRIBBLE 0x00000004 #define WB_RXSTAT_MIIERR 0x00000008 #define WB_RXSTAT_LATEEVENT 0x00000040 #define WB_RXSTAT_GIANT 0x00000080 #define WB_RXSTAT_LASTFRAG 0x00000100 #define WB_RXSTAT_FIRSTFRAG 0x00000200 #define WB_RXSTAT_MULTICAST 0x00000400 #define WB_RXSTAT_RUNT 0x00000800 #define WB_RXSTAT_RXTYPE 0x00003000 #define WB_RXSTAT_RXERR 0x00008000 #define WB_RXSTAT_RXLEN 0x3FFF0000 #define WB_RXSTAT_RXCMP 0x40000000 #define WB_RXSTAT_OWN 0x80000000 #define WB_RXBYTES(x) ((x & WB_RXSTAT_RXLEN) >> 16) #define WB_RXSTAT (WB_RXSTAT_FIRSTFRAG|WB_RXSTAT_LASTFRAG|WB_RXSTAT_OWN) #define WB_RXCTL_BUFLEN1 0x00000FFF #define WB_RXCTL_BUFLEN2 0x00FFF000 #define WB_RXCTL_RLINK 0x01000000 #define WB_RXCTL_RLAST 0x02000000 #define WB_TXSTAT_DEFER 0x00000001 #define WB_TXSTAT_UNDERRUN 0x00000002 #define WB_TXSTAT_COLLCNT 0x00000078 #define WB_TXSTAT_SQE 0x00000080 #define WB_TXSTAT_ABORT 0x00000100 #define WB_TXSTAT_LATECOLL 0x00000200 #define WB_TXSTAT_NOCARRIER 0x00000400 #define WB_TXSTAT_CARRLOST 0x00000800 #define WB_TXSTAT_TXERR 0x00001000 #define WB_TXSTAT_OWN 0x80000000 #define WB_TXCTL_BUFLEN1 0x000007FF #define WB_TXCTL_BUFLEN2 0x003FF800 #define WB_TXCTL_PAD 0x00800000 #define WB_TXCTL_TLINK 0x01000000 #define WB_TXCTL_TLAST 0x02000000 #define WB_TXCTL_NOCRC 0x08000000 #define WB_TXCTL_FIRSTFRAG 0x20000000 #define WB_TXCTL_LASTFRAG 0x40000000 #define WB_TXCTL_FINT 0x80000000 #define WB_MAXFRAGS 16 #define WB_RX_LIST_CNT 64 #define WB_TX_LIST_CNT 128 #define WB_MIN_FRAMELEN 60 #define ETHER_ALIGN 2 /* * A transmit 'super descriptor' is actually WB_MAXFRAGS regular * descriptors clumped together. The idea here is to emulate the * multi-fragment descriptor layout found in devices such as the * Texas Instruments ThunderLAN and 3Com boomerang and cylone chips. * The advantage to using this scheme is that it avoids buffer copies. * The disadvantage is that there's a certain amount of overhead due * to the fact that each 'fragment' is 16 bytes long. In my tests, * this limits top speed to about 10.5MB/sec. It should be more like * 11.5MB/sec. However, the upshot is that you can achieve better * results on slower machines: a Pentium 200 can pump out packets at * same speed as a PII 400. */ struct wb_txdesc { struct wb_desc wb_frag[WB_MAXFRAGS]; }; #define WB_TXNEXT(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_next #define WB_TXSTATUS(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_status #define WB_TXCTL(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_ctl #define WB_TXDATA(x) x->wb_ptr->wb_frag[x->wb_lastdesc].wb_data #define WB_TXOWN(x) x->wb_ptr->wb_frag[0].wb_status #define WB_UNSENT 0x1234 #define WB_BUFBYTES (1024 * sizeof(uint32_t)) struct wb_buf { uint32_t wb_data[1024]; }; struct wb_list_data { struct wb_buf wb_rxbufs[WB_RX_LIST_CNT]; struct wb_desc wb_rx_list[WB_RX_LIST_CNT]; struct wb_txdesc wb_tx_list[WB_TX_LIST_CNT]; }; struct wb_chain { struct wb_txdesc *wb_ptr; struct mbuf *wb_mbuf; struct wb_chain *wb_nextdesc; uint8_t wb_lastdesc; }; struct wb_chain_onefrag { struct wb_desc *wb_ptr; struct mbuf *wb_mbuf; void *wb_buf; struct wb_chain_onefrag *wb_nextdesc; uint8_t wb_rlast; }; struct wb_chain_data { uint8_t wb_pad[WB_MIN_FRAMELEN]; struct wb_chain_onefrag wb_rx_chain[WB_RX_LIST_CNT]; struct wb_chain wb_tx_chain[WB_TX_LIST_CNT]; struct wb_chain_onefrag *wb_rx_head; struct wb_chain *wb_tx_head; struct wb_chain *wb_tx_tail; struct wb_chain *wb_tx_free; }; struct wb_type { uint16_t wb_vid; uint16_t wb_did; char *wb_name; }; struct wb_mii_frame { uint8_t mii_stdelim; uint8_t mii_opcode; uint8_t mii_phyaddr; uint8_t mii_regaddr; uint8_t mii_turnaround; uint16_t mii_data; }; /* * MII constants */ #define WB_MII_STARTDELIM 0x01 #define WB_MII_READOP 0x02 #define WB_MII_WRITEOP 0x01 #define WB_MII_TURNAROUND 0x02 struct wb_softc { struct arpcom arpcom; /* interface info */ device_t wb_miibus; bus_space_handle_t wb_bhandle; bus_space_tag_t wb_btag; struct resource *wb_res; struct resource *wb_irq; void *wb_intrhand; struct wb_type *wb_info; /* Winbond adapter info */ uint8_t wb_unit; /* interface number */ uint8_t wb_type; uint16_t wb_txthresh; int wb_cachesize; caddr_t wb_ldata_ptr; struct wb_list_data *wb_ldata; struct wb_chain_data wb_cdata; struct callout wb_stat_timer; }; /* * register space access macros */ #define CSR_WRITE_4(sc, reg, val) \ bus_space_write_4(sc->wb_btag, sc->wb_bhandle, reg, val) #define CSR_WRITE_2(sc, reg, val) \ bus_space_write_2(sc->wb_btag, sc->wb_bhandle, reg, val) #define CSR_WRITE_1(sc, reg, val) \ bus_space_write_1(sc->wb_btag, sc->wb_bhandle, reg, val) #define CSR_READ_4(sc, reg) \ bus_space_read_4(sc->wb_btag, sc->wb_bhandle, reg) #define CSR_READ_2(sc, reg) \ bus_space_read_2(sc->wb_btag, sc->wb_bhandle, reg) #define CSR_READ_1(sc, reg) \ bus_space_read_1(sc->wb_btag, sc->wb_bhandle, reg) #define WB_TIMEOUT 1000 /* * General constants that are fun to know. * * Winbond PCI vendor ID */ #define WB_VENDORID 0x1050 /* * Winbond device IDs. */ #define WB_DEVICEID_840F 0x0840 /* * Compex vendor ID. */ #define CP_VENDORID 0x11F6 /* * Compex device IDs. */ #define CP_DEVICEID_RL100 0x2011 /* * PCI low memory base and low I/O base register, and * other PCI registers. */ #define WB_PCI_VENDOR_ID 0x00 #define WB_PCI_DEVICE_ID 0x02 #define WB_PCI_COMMAND 0x04 #define WB_PCI_STATUS 0x06 #define WB_PCI_CLASSCODE 0x09 #define WB_PCI_CACHELEN 0x0C #define WB_PCI_LATENCY_TIMER 0x0D #define WB_PCI_HEADER_TYPE 0x0E #define WB_PCI_LOIO 0x10 #define WB_PCI_LOMEM 0x14 #define WB_PCI_BIOSROM 0x30 #define WB_PCI_INTLINE 0x3C #define WB_PCI_INTPIN 0x3D #define WB_PCI_MINGNT 0x3E #define WB_PCI_MINLAT 0x0F #define WB_PCI_RESETOPT 0x48 #define WB_PCI_EEPROM_DATA 0x4C /* power management registers */ #define WB_PCI_CAPID 0xDC /* 8 bits */ #define WB_PCI_NEXTPTR 0xDD /* 8 bits */ #define WB_PCI_PWRMGMTCAP 0xDE /* 16 bits */ #define WB_PCI_PWRMGMTCTRL 0xE0 /* 16 bits */ #define WB_PSTATE_MASK 0x0003 #define WB_PSTATE_D0 0x0000 #define WB_PSTATE_D1 0x0002 #define WB_PSTATE_D2 0x0002 #define WB_PSTATE_D3 0x0003 #define WB_PME_EN 0x0010 #define WB_PME_STATUS 0x8000