/*
 * file: sbcard.h
 *
 * $FreeBSD: src/sys/i386/isa/sound/sbcard.h,v 1.4 1999/12/27 04:37:19 tanimura Exp $
 * $DragonFly: src/sys/platform/pc32/isa/sound/Attic/sbcard.h,v 1.2 2003/06/17 04:28:38 dillon Exp $
 *
 */

extern int sbc_major, sbc_minor ;
/*
 * sound blaster registers
 */

#ifdef PC98
#define DSP_RESET      (sbc_base + 0x600)
#define DSP_READ       (sbc_base + 0xA00)
#define DSP_WRITE      (sbc_base + 0xC00)
#define DSP_COMMAND    (sbc_base + 0xC00)
#define DSP_STATUS     (sbc_base + 0xC00)
#define DSP_DATA_AVAIL (sbc_base + 0xE00)
#define DSP_DATA_AVL16 (sbc_base + 0xF00)
#define MIXER_ADDR     (sbc_base + 0x400)
#define MIXER_DATA     (sbc_base + 0x500)
#define OPL3_LEFT      (sbc_base + 0x000)
#define OPL3_RIGHT     (sbc_base + 0x200)
#define OPL3_BOTH      (sbc_base + 0x800)
#else
#define DSP_RESET	(sbc_base + 0x6)
#define DSP_READ	(sbc_base + 0xA)
#define DSP_WRITE	(sbc_base + 0xC)
#define DSP_COMMAND	(sbc_base + 0xC)
#define DSP_STATUS	(sbc_base + 0xC)
#define DSP_DATA_AVAIL	(sbc_base + 0xE)
#define DSP_DATA_AVL16	(sbc_base + 0xF)
#define MIXER_ADDR	(sbc_base + 0x4)
#define MIXER_DATA	(sbc_base + 0x5)
#define OPL3_LEFT	(sbc_base + 0x0)
#define OPL3_RIGHT	(sbc_base + 0x2)
#define OPL3_BOTH	(sbc_base + 0x8)
#endif

/*
 * DSP Commands. There are many, and in many cases they are used explicitly
 */

#define DSP_CMD_SPKON		0xD1
#define DSP_CMD_SPKOFF		0xD3
#define DSP_CMD_DMAON		0xD0	/* ??? the comment says Halt DMA */
#define DSP_CMD_DMAOFF		0xD4	/* ??? comment says continue dma */

#define	DSP_CMD_DMAHALT		0xD0
#define	DSP_CMD_TCONST		0x40	/* set time constant */
#define	DSP_CMD_HSSIZE		0x48	/* high speed dma count */
#define	DSP_CMD_HSDAC		0x91	/* high speed dac */
#define	DSP_CMD_HSADC		0x99	/* high speed adc */
#define	DSP_CMD_DAC8		0x14	/* 8-bit dac (dma count) */
#define	DSP_CMD_ADC8		0x24	/* 8-bit adc (dma count) */

#define	DSP_CMD_GETVER		0xE1
#define	DSP_CMD_GETID		0xE7	/* return id bytes */

#if 0 /*** unknown ***/

#endif

#define IMODE_NONE		0
#define IMODE_OUTPUT		PCM_ENABLE_OUTPUT
#define IMODE_INPUT		PCM_ENABLE_INPUT
#define IMODE_INIT		3
#define IMODE_MIDI		4

#define NORMAL_MIDI	0
#define UART_MIDI	1