/* * Copyright (c) 1994 Herb Peyerl * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Herb Peyerl. * 4. The name of Herb Peyerl may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: src/sys/dev/vx/if_vx.c,v 1.25.2.6 2002/02/13 00:43:10 dillon Exp $ * $DragonFly: src/sys/dev/netif/vx/if_vx.c,v 1.21 2005/07/01 20:18:39 joerg Exp $ * */ /* * Created from if_ep.c driver by Fred Gray (fgray@rice.edu) to support * the 3c590 family. */ /* * Modified from the FreeBSD 1.1.5.1 version by: * Andres Vega Garcia * INRIA - Sophia Antipolis, France * avega@sophia.inria.fr */ /* * Promiscuous mode added and interrupt logic slightly changed * to reduce the number of adapter failures. Transceiver select * logic changed to use value from EEPROM. Autoconfiguration * features added. * Done by: * Serge Babkin * Chelindbank (Chelyabinsk, Russia) * babkin@hq.icb.chel.su */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "if_vxreg.h" DECLARE_DUMMY_MODULE(if_vx); static struct connector_entry { int bit; const char *name; } conn_tab[VX_CONNECTORS] = { #define CONNECTOR_UTP 0 { 0x08, "utp"}, #define CONNECTOR_AUI 1 { 0x20, "aui"}, /* dummy */ { 0, "???"}, #define CONNECTOR_BNC 3 { 0x10, "bnc"}, #define CONNECTOR_TX 4 { 0x02, "tx"}, #define CONNECTOR_FX 5 { 0x04, "fx"}, #define CONNECTOR_MII 6 { 0x40, "mii"}, { 0, "???"} }; /* int vxattach (struct vx_softc *); */ static void vxtxstat (struct vx_softc *); static int vxstatus (struct vx_softc *); static void vxinit (void *); static int vxioctl (struct ifnet *, u_long, caddr_t, struct ucred *); static void vxstart (struct ifnet *ifp); static void vxwatchdog (struct ifnet *); static void vxreset (struct vx_softc *); /* void vxstop (struct vx_softc *); */ static void vxread (struct vx_softc *); static struct mbuf *vxget (struct vx_softc *, u_int); static void vxmbuffill (void *); static void vxmbufempty (struct vx_softc *); static void vxsetfilter (struct vx_softc *); static void vxgetlink (struct vx_softc *); static void vxsetlink (struct vx_softc *); /* int vxbusyeeprom (struct vx_softc *); */ int vxattach(device_t dev) { struct vx_softc *sc; struct ifnet *ifp; int i; sc = device_get_softc(dev); callout_init(&sc->vx_timer); GO_WINDOW(0); CSR_WRITE_2(sc, VX_COMMAND, GLOBAL_RESET); VX_BUSY_WAIT; ifp = &sc->arpcom.ac_if; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); vxgetlink(sc); /* * Read the station address from the eeprom */ GO_WINDOW(0); for (i = 0; i < 3; i++) { int x; if (vxbusyeeprom(sc)) return 0; CSR_WRITE_2(sc, VX_W0_EEPROM_COMMAND, EEPROM_CMD_RD | (EEPROM_OEM_ADDR_0 + i)); if (vxbusyeeprom(sc)) return 0; x = CSR_READ_2(sc, VX_W0_EEPROM_DATA); sc->arpcom.ac_enaddr[(i << 1)] = x >> 8; sc->arpcom.ac_enaddr[(i << 1) + 1] = x; } ifp->if_mtu = ETHERMTU; ifq_set_maxlen(&ifp->if_snd, IFQ_MAXLEN); ifq_set_ready(&ifp->if_snd); ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_start = vxstart; ifp->if_ioctl = vxioctl; ifp->if_init = vxinit; ifp->if_watchdog = vxwatchdog; ifp->if_softc = sc; ether_ifattach(ifp, sc->arpcom.ac_enaddr); sc->tx_start_thresh = 20; /* probably a good starting point. */ vxstop(sc); return 1; } /* * The order in here seems important. Otherwise we may not receive * interrupts. ?! */ static void vxinit(xsc) void *xsc; { struct vx_softc *sc = (struct vx_softc *) xsc; struct ifnet *ifp = &sc->arpcom.ac_if; int i; VX_BUSY_WAIT; GO_WINDOW(2); for (i = 0; i < 6; i++) /* Reload the ether_addr. */ CSR_WRITE_1(sc, VX_W2_ADDR_0 + i, sc->arpcom.ac_enaddr[i]); CSR_WRITE_2(sc, VX_COMMAND, RX_RESET); VX_BUSY_WAIT; CSR_WRITE_2(sc, VX_COMMAND, TX_RESET); VX_BUSY_WAIT; GO_WINDOW(1); /* Window 1 is operating window */ for (i = 0; i < 31; i++) CSR_READ_1(sc, VX_W1_TX_STATUS); CSR_WRITE_2(sc, VX_COMMAND,SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL); CSR_WRITE_2(sc, VX_COMMAND,SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL); /* * Attempt to get rid of any stray interrupts that occured during * configuration. On the i386 this isn't possible because one may * already be queued. However, a single stray interrupt is * unimportant. */ CSR_WRITE_2(sc, VX_COMMAND, ACK_INTR | 0xff); vxsetfilter(sc); vxsetlink(sc); CSR_WRITE_2(sc, VX_COMMAND, RX_ENABLE); CSR_WRITE_2(sc, VX_COMMAND, TX_ENABLE); vxmbuffill((caddr_t) sc); /* Interface is now `running', with no output active. */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; /* Attempt to start output, if any. */ vxstart(ifp); } static void vxsetfilter(sc) struct vx_softc *sc; { struct ifnet *ifp = &sc->arpcom.ac_if; GO_WINDOW(1); /* Window 1 is operating window */ CSR_WRITE_2(sc, VX_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST | FIL_MULTICAST | ((ifp->if_flags & IFF_PROMISC) ? FIL_PROMISC : 0 )); } static void vxgetlink(sc) struct vx_softc *sc; { int n, k; GO_WINDOW(3); sc->vx_connectors = CSR_READ_2(sc, VX_W3_RESET_OPT) & 0x7f; for (n = 0, k = 0; k < VX_CONNECTORS; k++) { if (sc->vx_connectors & conn_tab[k].bit) { if (n == 0) if_printf(&sc->arpcom.ac_if, "%s", conn_tab[k].name); else printf("/%s", conn_tab[k].name); n++; } } if (n == 0) { if_printf(&sc->arpcom.ac_if, "no connectors!\n"); return; } GO_WINDOW(3); sc->vx_connector = (CSR_READ_4(sc, VX_W3_INTERNAL_CFG) & INTERNAL_CONNECTOR_MASK) >> INTERNAL_CONNECTOR_BITS; if (sc->vx_connector & 0x10) { sc->vx_connector &= 0x0f; printf("[*%s*]", conn_tab[(int)sc->vx_connector].name); printf(": disable 'auto select' with DOS util!\n"); } else { printf("[*%s*]\n", conn_tab[(int)sc->vx_connector].name); } } static void vxsetlink(sc) struct vx_softc *sc; { struct ifnet *ifp = &sc->arpcom.ac_if; int i, j, k; const char *reason, *warning; static short prev_flags; static char prev_conn = -1; if (prev_conn == -1) { prev_conn = sc->vx_connector; } /* * S.B. * * Now behavior was slightly changed: * * if any of flags link[0-2] is used and its connector is * physically present the following connectors are used: * * link0 - AUI * highest precedence * link1 - BNC * link2 - UTP * lowest precedence * * If none of them is specified then * connector specified in the EEPROM is used * (if present on card or UTP if not). */ i = sc->vx_connector; /* default in EEPROM */ reason = "default"; warning = 0; if (ifp->if_flags & IFF_LINK0) { if (sc->vx_connectors & conn_tab[CONNECTOR_AUI].bit) { i = CONNECTOR_AUI; reason = "link0"; } else { warning = "aui not present! (link0)"; } } else if (ifp->if_flags & IFF_LINK1) { if (sc->vx_connectors & conn_tab[CONNECTOR_BNC].bit) { i = CONNECTOR_BNC; reason = "link1"; } else { warning = "bnc not present! (link1)"; } } else if (ifp->if_flags & IFF_LINK2) { if (sc->vx_connectors & conn_tab[CONNECTOR_UTP].bit) { i = CONNECTOR_UTP; reason = "link2"; } else { warning = "utp not present! (link2)"; } } else if ((sc->vx_connectors & conn_tab[(int)sc->vx_connector].bit) == 0) { warning = "strange connector type in EEPROM."; reason = "forced"; i = CONNECTOR_UTP; } /* Avoid unnecessary message. */ k = (prev_flags ^ ifp->if_flags) & (IFF_LINK0 | IFF_LINK1 | IFF_LINK2); if ((k != 0) || (prev_conn != i)) { if (warning != 0) { if_printf(ifp, "warning: %s\n", warning); } if_printf(ifp, "selected %s. (%s)\n", conn_tab[i].name, reason); } /* Set the selected connector. */ GO_WINDOW(3); j = CSR_READ_4(sc, VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK; CSR_WRITE_4(sc, VX_W3_INTERNAL_CFG, j | (i <if_flags; prev_conn = i; } static void vxstart(ifp) struct ifnet *ifp; { struct vx_softc *sc = ifp->if_softc; struct mbuf *m0; int len, pad; /* Don't transmit if interface is busy or not running */ if ((sc->arpcom.ac_if.if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) return; startagain: /* Sneak a peek at the next packet */ m0 = ifq_poll(&ifp->if_snd); if (m0 == NULL) return; /* We need to use m->m_pkthdr.len, so require the header */ if ((m0->m_flags & M_PKTHDR) == 0) panic("vxstart: no header mbuf"); len = m0->m_pkthdr.len; pad = (4 - len) & 3; /* * The 3c509 automatically pads short packets to minimum ethernet length, * but we drop packets that are too large. Perhaps we should truncate * them instead? */ if (len + pad > ETHER_MAX_LEN) { /* packet is obviously too large: toss it */ ++ifp->if_oerrors; m0 = ifq_dequeue(&ifp->if_snd); m_freem(m0); goto readcheck; } VX_BUSY_WAIT; if (CSR_READ_2(sc, VX_W1_FREE_TX) < len + pad + 4) { CSR_WRITE_2(sc, VX_COMMAND, SET_TX_AVAIL_THRESH | ((len + pad + 4) >> 2)); /* not enough room in FIFO */ if (CSR_READ_2(sc, VX_W1_FREE_TX) < len + pad + 4) { /* make sure */ ifp->if_flags |= IFF_OACTIVE; ifp->if_timer = 1; return; } } CSR_WRITE_2(sc, VX_COMMAND, SET_TX_AVAIL_THRESH | (8188 >> 2)); m0 = ifq_dequeue(&ifp->if_snd); VX_BUSY_WAIT; CSR_WRITE_2(sc, VX_COMMAND, SET_TX_START_THRESH | ((len / 4 + sc->tx_start_thresh) >> 2)); BPF_MTAP(&sc->arpcom.ac_if, m0); /* * Do the output in a critical section so that an interrupt from another device * won't cause a FIFO underrun. */ crit_enter(); CSR_WRITE_4(sc, VX_W1_TX_PIO_WR_1, len | TX_INDICATE); while (m0) { if (m0->m_len > 3) bus_space_write_multi_4(sc->vx_btag, sc->vx_bhandle, VX_W1_TX_PIO_WR_1, (u_int32_t *)mtod(m0, caddr_t), m0->m_len / 4); if (m0->m_len & 3) bus_space_write_multi_1(sc->vx_btag, sc->vx_bhandle, VX_W1_TX_PIO_WR_1, mtod(m0, caddr_t) + (m0->m_len & ~3), m0->m_len & 3); m0 = m_free(m0); } while (pad--) CSR_WRITE_1(sc, VX_W1_TX_PIO_WR_1, 0); /* Padding */ crit_exit(); ++ifp->if_opackets; ifp->if_timer = 1; readcheck: if ((CSR_READ_2(sc, VX_W1_RX_STATUS) & ERR_INCOMPLETE) == 0) { /* We received a complete packet. */ if ((CSR_READ_2(sc, VX_STATUS) & S_INTR_LATCH) != 0) { /* Got an interrupt, return so that it gets serviced. */ return; } /* * No interrupt, read the packet and continue * Is this supposed to happen? Is my motherboard * completely busted? */ vxread(sc); } else { /* Check if we are stuck and reset [see XXX comment] */ if (vxstatus(sc)) { if (ifp->if_flags & IFF_DEBUG) if_printf(ifp, "adapter reset\n"); vxreset(sc); } } goto startagain; } /* * XXX: The 3c509 card can get in a mode where both the fifo status bit * FIFOS_RX_OVERRUN and the status bit ERR_INCOMPLETE are set * We detect this situation and we reset the adapter. * It happens at times when there is a lot of broadcast traffic * on the cable (once in a blue moon). */ static int vxstatus(sc) struct vx_softc *sc; { int fifost; /* * Check the FIFO status and act accordingly */ GO_WINDOW(4); fifost = CSR_READ_2(sc, VX_W4_FIFO_DIAG); GO_WINDOW(1); if (fifost & FIFOS_RX_UNDERRUN) { if (sc->arpcom.ac_if.if_flags & IFF_DEBUG) if_printf(&sc->arpcom.ac_if, "RX underrun\n"); vxreset(sc); return 0; } if (fifost & FIFOS_RX_STATUS_OVERRUN) { if (sc->arpcom.ac_if.if_flags & IFF_DEBUG) if_printf(&sc->arpcom.ac_if, "RX Status overrun\n"); return 1; } if (fifost & FIFOS_RX_OVERRUN) { if (sc->arpcom.ac_if.if_flags & IFF_DEBUG) if_printf(&sc->arpcom.ac_if, "RX overrun\n"); return 1; } if (fifost & FIFOS_TX_OVERRUN) { if (sc->arpcom.ac_if.if_flags & IFF_DEBUG) if_printf(&sc->arpcom.ac_if, "TX overrun\n"); vxreset(sc); return 0; } return 0; } static void vxtxstat(sc) struct vx_softc *sc; { int i; /* * We need to read+write TX_STATUS until we get a 0 status * in order to turn off the interrupt flag. */ while ((i = CSR_READ_1(sc, VX_W1_TX_STATUS)) & TXS_COMPLETE) { CSR_WRITE_1(sc, VX_W1_TX_STATUS, 0x0); if (i & TXS_JABBER) { ++sc->arpcom.ac_if.if_oerrors; if (sc->arpcom.ac_if.if_flags & IFF_DEBUG) if_printf(&sc->arpcom.ac_if, "jabber (%x)\n", i); vxreset(sc); } else if (i & TXS_UNDERRUN) { ++sc->arpcom.ac_if.if_oerrors; if (sc->arpcom.ac_if.if_flags & IFF_DEBUG) { if_printf(&sc->arpcom.ac_if, "fifo underrun (%x) @%d\n", i, sc->tx_start_thresh); } if (sc->tx_succ_ok < 100) sc->tx_start_thresh = min(ETHER_MAX_LEN, sc->tx_start_thresh + 20); sc->tx_succ_ok = 0; vxreset(sc); } else if (i & TXS_MAX_COLLISION) { ++sc->arpcom.ac_if.if_collisions; CSR_WRITE_2(sc, VX_COMMAND, TX_ENABLE); sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE; } else sc->tx_succ_ok = (sc->tx_succ_ok+1) & 127; } } void vxintr(voidsc) void *voidsc; { short status; struct vx_softc *sc = voidsc; struct ifnet *ifp = &sc->arpcom.ac_if; for (;;) { CSR_WRITE_2(sc, VX_COMMAND, C_INTR_LATCH); status = CSR_READ_2(sc, VX_STATUS); if ((status & (S_TX_COMPLETE | S_TX_AVAIL | S_RX_COMPLETE | S_CARD_FAILURE)) == 0) break; /* * Acknowledge any interrupts. It's important that we do this * first, since there would otherwise be a race condition. * Due to the i386 interrupt queueing, we may get spurious * interrupts occasionally. */ CSR_WRITE_2(sc, VX_COMMAND, ACK_INTR | status); if (status & S_RX_COMPLETE) vxread(sc); if (status & S_TX_AVAIL) { ifp->if_timer = 0; sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE; vxstart(&sc->arpcom.ac_if); } if (status & S_CARD_FAILURE) { if_printf(ifp, "adapter failure (%x)\n", status); ifp->if_timer = 0; vxreset(sc); return; } if (status & S_TX_COMPLETE) { ifp->if_timer = 0; vxtxstat(sc); vxstart(ifp); } } /* no more interrupts */ } static void vxread(sc) struct vx_softc *sc; { struct ifnet *ifp = &sc->arpcom.ac_if; struct mbuf *m; struct ether_header *eh; u_int len; len = CSR_READ_2(sc, VX_W1_RX_STATUS); again: if (ifp->if_flags & IFF_DEBUG) { int err = len & ERR_MASK; const char *s = NULL; if (len & ERR_INCOMPLETE) s = "incomplete packet"; else if (err == ERR_OVERRUN) s = "packet overrun"; else if (err == ERR_RUNT) s = "runt packet"; else if (err == ERR_ALIGNMENT) s = "bad alignment"; else if (err == ERR_CRC) s = "bad crc"; else if (err == ERR_OVERSIZE) s = "oversized packet"; else if (err == ERR_DRIBBLE) s = "dribble bits"; if (s) if_printf(ifp, "%s\n", s); } if (len & ERR_INCOMPLETE) return; if (len & ERR_RX) { ++ifp->if_ierrors; goto abort; } len &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */ /* Pull packet off interface. */ m = vxget(sc, len); if (m == 0) { ifp->if_ierrors++; goto abort; } ++ifp->if_ipackets; /* We assume the header fit entirely in one mbuf. */ eh = mtod(m, struct ether_header *); /* * XXX: Some cards seem to be in promiscous mode all the time. * we need to make sure we only get our own stuff always. * bleah! */ if ((eh->ether_dhost[0] & 1) == 0 /* !mcast and !bcast */ && bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN) != 0) { m_freem(m); return; } (*ifp->if_input)(ifp, m); /* * In periods of high traffic we can actually receive enough * packets so that the fifo overrun bit will be set at this point, * even though we just read a packet. In this case we * are not going to receive any more interrupts. We check for * this condition and read again until the fifo is not full. * We could simplify this test by not using vxstatus(), but * rechecking the RX_STATUS register directly. This test could * result in unnecessary looping in cases where there is a new * packet but the fifo is not full, but it will not fix the * stuck behavior. * * Even with this improvement, we still get packet overrun errors * which are hurting performance. Maybe when I get some more time * I'll modify vxread() so that it can handle RX_EARLY interrupts. */ if (vxstatus(sc)) { len = CSR_READ_2(sc, VX_W1_RX_STATUS); /* Check if we are stuck and reset [see XXX comment] */ if (len & ERR_INCOMPLETE) { if (ifp->if_flags & IFF_DEBUG) if_printf(ifp, "adapter reset\n"); vxreset(sc); return; } goto again; } return; abort: CSR_WRITE_2(sc, VX_COMMAND, RX_DISCARD_TOP_PACK); } static struct mbuf * vxget(sc, totlen) struct vx_softc *sc; u_int totlen; { struct ifnet *ifp = &sc->arpcom.ac_if; struct mbuf *top, **mp, *m; int len; m = sc->mb[sc->next_mb]; sc->mb[sc->next_mb] = 0; if (m == 0) { MGETHDR(m, MB_DONTWAIT, MT_DATA); if (m == 0) return 0; } else { /* If the queue is no longer full, refill. */ if (sc->last_mb == sc->next_mb && sc->buffill_pending == 0) { callout_reset(&sc->vx_timer, 1, vxmbuffill, sc); sc->buffill_pending = 1; } /* Convert one of our saved mbuf's. */ sc->next_mb = (sc->next_mb + 1) % MAX_MBS; m->m_data = m->m_pktdat; m->m_flags = M_PKTHDR; bzero(&m->m_pkthdr, sizeof(m->m_pkthdr)); } m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = totlen; len = MHLEN; top = 0; mp = ⊤ /* * We read the packet in a critical section so that an interrupt from another * device doesn't cause the card's buffer to overflow while we're * reading it. We may still lose packets at other times. */ crit_enter(); /* * Since we don't set allowLargePackets bit in MacControl register, * we can assume that totlen <= 1500bytes. * The while loop will be performed iff we have a packet with * MLEN < m_len < MINCLSIZE. */ while (totlen > 0) { if (top) { m = sc->mb[sc->next_mb]; sc->mb[sc->next_mb] = 0; if (m == 0) { MGET(m, MB_DONTWAIT, MT_DATA); if (m == 0) { crit_exit(); m_freem(top); return 0; } } else { sc->next_mb = (sc->next_mb + 1) % MAX_MBS; } len = MLEN; } if (totlen >= MINCLSIZE) { MCLGET(m, MB_DONTWAIT); if (m->m_flags & M_EXT) len = MCLBYTES; } len = min(totlen, len); if (len > 3) bus_space_read_multi_4(sc->vx_btag, sc->vx_bhandle, VX_W1_RX_PIO_RD_1, mtod(m, u_int32_t *), len / 4); if (len & 3) { bus_space_read_multi_1(sc->vx_btag, sc->vx_bhandle, VX_W1_RX_PIO_RD_1, mtod(m, u_int8_t *) + (len & ~3), len & 3); } m->m_len = len; totlen -= len; *mp = m; mp = &m->m_next; } CSR_WRITE_2(sc, VX_COMMAND, RX_DISCARD_TOP_PACK); crit_exit(); return top; } static int vxioctl(ifp, cmd, data, cr) struct ifnet *ifp; u_long cmd; caddr_t data; struct ucred *cr; { struct vx_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; int error = 0; crit_enter(); switch (cmd) { case SIOCSIFFLAGS: if ((ifp->if_flags & IFF_UP) == 0 && (ifp->if_flags & IFF_RUNNING) != 0) { /* * If interface is marked up and it is stopped, then * start it. */ vxstop(sc); ifp->if_flags &= ~IFF_RUNNING; } else if ((ifp->if_flags & IFF_UP) != 0 && (ifp->if_flags & IFF_RUNNING) == 0) { /* * If interface is marked up and it is stopped, then * start it. */ vxinit(sc); } else { /* * deal with flags changes: * IFF_MULTICAST, IFF_PROMISC, * IFF_LINK0, IFF_LINK1, */ vxsetfilter(sc); vxsetlink(sc); } break; case SIOCSIFMTU: /* * Set the interface MTU. */ if (ifr->ifr_mtu > ETHERMTU) { error = EINVAL; } else { ifp->if_mtu = ifr->ifr_mtu; } break; case SIOCADDMULTI: case SIOCDELMULTI: /* * Multicast list has changed; set the hardware filter * accordingly. */ vxreset(sc); error = 0; break; default: ether_ioctl(ifp, cmd, data); break; } crit_exit(); return (error); } static void vxreset(sc) struct vx_softc *sc; { crit_enter(); vxstop(sc); vxinit(sc); crit_exit(); } static void vxwatchdog(ifp) struct ifnet *ifp; { struct vx_softc *sc = ifp->if_softc; if (ifp->if_flags & IFF_DEBUG) if_printf(ifp, "device timeout\n"); ifp->if_flags &= ~IFF_OACTIVE; vxstart(ifp); vxintr(sc); } void vxstop(sc) struct vx_softc *sc; { struct ifnet *ifp = &sc->arpcom.ac_if; ifp->if_timer = 0; CSR_WRITE_2(sc, VX_COMMAND, RX_DISABLE); CSR_WRITE_2(sc, VX_COMMAND, RX_DISCARD_TOP_PACK); VX_BUSY_WAIT; CSR_WRITE_2(sc, VX_COMMAND, TX_DISABLE); CSR_WRITE_2(sc, VX_COMMAND, STOP_TRANSCEIVER); DELAY(800); CSR_WRITE_2(sc, VX_COMMAND, RX_RESET); VX_BUSY_WAIT; CSR_WRITE_2(sc, VX_COMMAND, TX_RESET); VX_BUSY_WAIT; CSR_WRITE_2(sc, VX_COMMAND, C_INTR_LATCH); CSR_WRITE_2(sc, VX_COMMAND, SET_RD_0_MASK); CSR_WRITE_2(sc, VX_COMMAND, SET_INTR_MASK); CSR_WRITE_2(sc, VX_COMMAND, SET_RX_FILTER); vxmbufempty(sc); } int vxbusyeeprom(sc) struct vx_softc *sc; { int j, i = 100; while (i--) { j = CSR_READ_2(sc, VX_W0_EEPROM_COMMAND); if (j & EEPROM_BUSY) DELAY(100); else break; } if (!i) { if_printf(&sc->arpcom.ac_if, "eeprom failed to come ready\n"); return (1); } return (0); } static void vxmbuffill(sp) void *sp; { struct vx_softc *sc = (struct vx_softc *) sp; int i; crit_enter(); i = sc->last_mb; do { if (sc->mb[i] == NULL) MGET(sc->mb[i], MB_DONTWAIT, MT_DATA); if (sc->mb[i] == NULL) break; i = (i + 1) % MAX_MBS; } while (i != sc->next_mb); sc->last_mb = i; /* If the queue was not filled, try again. */ if (sc->last_mb != sc->next_mb) { callout_reset(&sc->vx_timer, 1, vxmbuffill, sc); sc->buffill_pending = 1; } else { sc->buffill_pending = 0; } crit_exit(); } static void vxmbufempty(sc) struct vx_softc *sc; { int i; crit_enter(); for (i = 0; i < MAX_MBS; i++) { if (sc->mb[i]) { m_freem(sc->mb[i]); sc->mb[i] = NULL; } } sc->last_mb = sc->next_mb = 0; if (sc->buffill_pending != 0) callout_stop(&sc->vx_timer); crit_exit(); }