/*- * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 scanning support. */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include /* XXX until it's implemented as attach ops */ #include #include /* * Roaming-related defaults. RSSI thresholds are as returned by the * driver (.5dBm). Transmit rate thresholds are IEEE rate codes (i.e * .5M units) or MCS. */ /* rssi thresholds */ #define ROAM_RSSI_11A_DEFAULT 14 /* 11a bss */ #define ROAM_RSSI_11B_DEFAULT 14 /* 11b bss */ #define ROAM_RSSI_11BONLY_DEFAULT 14 /* 11b-only bss */ /* transmit rate thresholds */ #define ROAM_RATE_11A_DEFAULT 2*12 /* 11a bss */ #define ROAM_RATE_11B_DEFAULT 2*5 /* 11b bss */ #define ROAM_RATE_11BONLY_DEFAULT 2*1 /* 11b-only bss */ #define ROAM_RATE_HALF_DEFAULT 2*6 /* half-width 11a/g bss */ #define ROAM_RATE_QUARTER_DEFAULT 2*3 /* quarter-width 11a/g bss */ #define ROAM_MCS_11N_DEFAULT (1 | IEEE80211_RATE_MCS) /* 11n bss */ void ieee80211_scan_attach(struct ieee80211com *ic) { /* * If there's no scan method pointer, attach the * swscan set as a default. */ if (ic->ic_scan_methods == NULL) ieee80211_swscan_attach(ic); else ic->ic_scan_methods->sc_attach(ic); } void ieee80211_scan_detach(struct ieee80211com *ic) { /* * Ideally we'd do the ss_ops detach call here; * but then sc_detach() would need to be split in two. * * I'll do that later. */ ic->ic_scan_methods->sc_detach(ic); } static const struct ieee80211_roamparam defroam[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_11A] = { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_11G] = { .rssi = ROAM_RSSI_11B_DEFAULT, .rate = ROAM_RATE_11B_DEFAULT }, [IEEE80211_MODE_11B] = { .rssi = ROAM_RSSI_11BONLY_DEFAULT, .rate = ROAM_RATE_11BONLY_DEFAULT }, [IEEE80211_MODE_TURBO_A]= { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_TURBO_G]= { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_STURBO_A]={ .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_HALF] = { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_HALF_DEFAULT }, [IEEE80211_MODE_QUARTER]= { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_QUARTER_DEFAULT }, [IEEE80211_MODE_11NA] = { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_MCS_11N_DEFAULT }, [IEEE80211_MODE_11NG] = { .rssi = ROAM_RSSI_11B_DEFAULT, .rate = ROAM_MCS_11N_DEFAULT }, }; void ieee80211_scan_vattach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; vap->iv_bgscanidle = (IEEE80211_BGSCAN_IDLE_DEFAULT*1000)/hz; vap->iv_bgscanintvl = IEEE80211_BGSCAN_INTVAL_DEFAULT*hz; vap->iv_scanvalid = IEEE80211_SCAN_VALID_DEFAULT*hz; vap->iv_roaming = IEEE80211_ROAMING_AUTO; memcpy(vap->iv_roamparms, defroam, sizeof(defroam)); ic->ic_scan_methods->sc_vattach(vap); } void ieee80211_scan_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK(ic); ss = ic->ic_scan; ic->ic_scan_methods->sc_vdetach(vap); if (ss != NULL && ss->ss_vap == vap) { if (ss->ss_ops != NULL) { ss->ss_ops->scan_detach(ss); ss->ss_ops = NULL; } ss->ss_vap = NULL; } IEEE80211_UNLOCK(ic); } /* * Simple-minded scanner module support. */ static const char *scan_modnames[IEEE80211_OPMODE_MAX] = { "wlan_scan_sta", /* IEEE80211_M_IBSS */ "wlan_scan_sta", /* IEEE80211_M_STA */ "wlan_scan_wds", /* IEEE80211_M_WDS */ "wlan_scan_sta", /* IEEE80211_M_AHDEMO */ "wlan_scan_ap", /* IEEE80211_M_HOSTAP */ "wlan_scan_monitor", /* IEEE80211_M_MONITOR */ "wlan_scan_sta", /* IEEE80211_M_MBSS */ }; static const struct ieee80211_scanner *scanners[IEEE80211_OPMODE_MAX]; const struct ieee80211_scanner * ieee80211_scanner_get(enum ieee80211_opmode mode) { if (mode >= IEEE80211_OPMODE_MAX) return NULL; if (scanners[mode] == NULL) ieee80211_load_module(scan_modnames[mode]); return scanners[mode]; } void ieee80211_scanner_register(enum ieee80211_opmode mode, const struct ieee80211_scanner *scan) { if (mode >= IEEE80211_OPMODE_MAX) return; scanners[mode] = scan; } void ieee80211_scanner_unregister(enum ieee80211_opmode mode, const struct ieee80211_scanner *scan) { if (mode >= IEEE80211_OPMODE_MAX) return; if (scanners[mode] == scan) scanners[mode] = NULL; } void ieee80211_scanner_unregister_all(const struct ieee80211_scanner *scan) { int m; for (m = 0; m < IEEE80211_OPMODE_MAX; m++) if (scanners[m] == scan) scanners[m] = NULL; } /* * Update common scanner state to reflect the current * operating mode. This is called when the state machine * is transitioned to RUN state w/o scanning--e.g. when * operating in monitor mode. The purpose of this is to * ensure later callbacks find ss_ops set to properly * reflect current operating mode. */ void ieee80211_scan_update_locked(struct ieee80211vap *vap, const struct ieee80211_scanner *scan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); #ifdef IEEE80211_DEBUG if (ss->ss_vap != vap || ss->ss_ops != scan) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: current scanner is <%s:%s>, switch to <%s:%s>\n", __func__, ss->ss_vap != NULL ? ss->ss_vap->iv_ifp->if_xname : "none", ss->ss_vap != NULL ? ieee80211_opmode_name[ss->ss_vap->iv_opmode] : "none", vap->iv_ifp->if_xname, ieee80211_opmode_name[vap->iv_opmode]); } #endif ss->ss_vap = vap; if (ss->ss_ops != scan) { /* * Switch scanners; detach old, attach new. Special * case where a single scan module implements multiple * policies by using different scan ops but a common * core. We assume if the old and new attach methods * are identical then it's ok to just change ss_ops * and not flush the internal state of the module. */ if (scan == NULL || ss->ss_ops == NULL || ss->ss_ops->scan_attach != scan->scan_attach) { if (ss->ss_ops != NULL) ss->ss_ops->scan_detach(ss); if (scan != NULL && !scan->scan_attach(ss)) { /* XXX attach failure */ /* XXX stat+msg */ scan = NULL; } } ss->ss_ops = scan; } } void ieee80211_scan_dump_channels(const struct ieee80211_scan_state *ss) { struct ieee80211com *ic = ss->ss_ic; const char *sep; int i; sep = ""; for (i = ss->ss_next; i < ss->ss_last; i++) { const struct ieee80211_channel *c = ss->ss_chans[i]; kprintf("%s%u%c", sep, ieee80211_chan2ieee(ic, c), ieee80211_channel_type_char(c)); sep = ", "; } } #ifdef IEEE80211_DEBUG void ieee80211_scan_dump(struct ieee80211_scan_state *ss) { struct ieee80211vap *vap = ss->ss_vap; if_printf(vap->iv_ifp, "scan set "); ieee80211_scan_dump_channels(ss); kprintf(" dwell min %lums max %lums\n", ticks_to_msecs(ss->ss_mindwell), ticks_to_msecs(ss->ss_maxdwell)); } #endif /* IEEE80211_DEBUG */ void ieee80211_scan_copy_ssid(struct ieee80211vap *vap, struct ieee80211_scan_state *ss, int nssid, const struct ieee80211_scan_ssid ssids[]) { if (nssid > IEEE80211_SCAN_MAX_SSID) { /* XXX printf */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: too many ssid %d, ignoring all of them\n", __func__, nssid); return; } memcpy(ss->ss_ssid, ssids, nssid * sizeof(ssids[0])); ss->ss_nssid = nssid; } /* * Start a scan unless one is already going. */ int ieee80211_start_scan(struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { const struct ieee80211_scanner *scan; struct ieee80211com *ic = vap->iv_ic; scan = ieee80211_scanner_get(vap->iv_opmode); if (scan == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no scanner support for %s mode\n", __func__, ieee80211_opmode_name[vap->iv_opmode]); /* XXX stat */ return 0; } return ic->ic_scan_methods->sc_start_scan(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. */ int ieee80211_check_scan(struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; const struct ieee80211_scanner *scan; int result; scan = ieee80211_scanner_get(vap->iv_opmode); if (scan == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no scanner support for %d mode\n", __func__, vap->iv_opmode); /* XXX stat */ return 0; } /* * Check if there's a list of scan candidates already. * XXX want more than the ap we're currently associated with */ IEEE80211_LOCK(ic); IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, %s%s%s%s%s\n" , __func__ , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive" , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append" , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : "" , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : "" , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : "" , flags & IEEE80211_SCAN_ONCE ? ", once" : "" ); if (ss->ss_ops != scan) { /* XXX re-use cache contents? e.g. adhoc<->sta */ flags |= IEEE80211_SCAN_FLUSH; } /* * XXX TODO: separate things out a bit better. */ ieee80211_scan_update_locked(vap, scan); result = ic->ic_scan_methods->sc_check_scan(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); IEEE80211_UNLOCK(ic); return (result); } /* * Check the scan cache for an ap/channel to use; if that fails * then kick off a scan using the current settings. */ int ieee80211_check_scan_current(struct ieee80211vap *vap) { return ieee80211_check_scan(vap, IEEE80211_SCAN_ACTIVE, IEEE80211_SCAN_FOREVER, 0, 0, vap->iv_des_nssid, vap->iv_des_ssid); } /* * Restart a previous scan. If the previous scan completed * then we start again using the existing channel list. */ int ieee80211_bg_scan(struct ieee80211vap *vap, int flags) { struct ieee80211com *ic = vap->iv_ic; const struct ieee80211_scanner *scan; // IEEE80211_UNLOCK_ASSERT(sc); scan = ieee80211_scanner_get(vap->iv_opmode); if (scan == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no scanner support for %d mode\n", __func__, vap->iv_opmode); /* XXX stat */ return 0; } /* * XXX TODO: pull apart the bgscan logic into whatever * belongs here and whatever belongs in the software * scanner. */ return (ic->ic_scan_methods->sc_bg_scan(scan, vap, flags)); } /* * Cancel any scan currently going on for the specified vap. */ void ieee80211_cancel_scan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; ic->ic_scan_methods->sc_cancel_scan(vap); } /* * Cancel any scan currently going on. * * This is called during normal 802.11 data path to cancel * a scan so a newly arrived normal data packet can be sent. */ void ieee80211_cancel_anyscan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; ic->ic_scan_methods->sc_cancel_anyscan(vap); } /* * Manually switch to the next channel in the channel list. * Provided for drivers that manage scanning themselves * (e.g. for firmware-based devices). */ void ieee80211_scan_next(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; ic->ic_scan_methods->sc_scan_next(vap); } /* * Manually stop a scan that is currently running. * Provided for drivers that are not able to scan single channels * (e.g. for firmware-based devices). */ void ieee80211_scan_done(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); IEEE80211_LOCK(ic); ss = ic->ic_scan; ss->ss_next = ss->ss_last; /* all channels are complete */ ic->ic_scan_methods->sc_scan_done(vap); IEEE80211_UNLOCK(ic); } /* * Probe the current channel, if allowed, while scanning. * If the channel is not marked passive-only then send * a probe request immediately. Otherwise mark state and * listen for beacons on the channel; if we receive something * then we'll transmit a probe request. */ void ieee80211_probe_curchan(struct ieee80211vap *vap, int force) { struct ieee80211com *ic = vap->iv_ic; if ((ic->ic_curchan->ic_flags & IEEE80211_CHAN_PASSIVE) && !force) { ic->ic_flags_ext |= IEEE80211_FEXT_PROBECHAN; return; } ic->ic_scan_methods->sc_scan_probe_curchan(vap, force); } #ifdef IEEE80211_DEBUG static void dump_country(const uint8_t *ie) { const struct ieee80211_country_ie *cie = (const struct ieee80211_country_ie *) ie; int i, nbands, schan, nchan; if (cie->len < 3) { kprintf(" ", cie->len); return; } kprintf(" country [%c%c%c", cie->cc[0], cie->cc[1], cie->cc[2]); nbands = (cie->len - 3) / sizeof(cie->band[0]); for (i = 0; i < nbands; i++) { schan = cie->band[i].schan; nchan = cie->band[i].nchan; if (nchan != 1) kprintf(" %u-%u,%u", schan, schan + nchan-1, cie->band[i].maxtxpwr); else kprintf(" %u,%u", schan, cie->band[i].maxtxpwr); } kprintf("]"); } void ieee80211_scan_dump_probe_beacon(uint8_t subtype, int isnew, const uint8_t mac[IEEE80211_ADDR_LEN], const struct ieee80211_scanparams *sp, int rssi) { kprintf("[%s] %s%s on chan %u (bss chan %u) ", ether_sprintf(mac), isnew ? "new " : "", ieee80211_mgt_subtype_name(subtype), sp->chan, sp->bchan); ieee80211_print_essid(sp->ssid + 2, sp->ssid[1]); kprintf(" rssi %d\n", rssi); if (isnew) { kprintf("[%s] caps 0x%x bintval %u erp 0x%x", ether_sprintf(mac), sp->capinfo, sp->bintval, sp->erp); if (sp->country != NULL) dump_country(sp->country); kprintf("\n"); } } #endif /* IEEE80211_DEBUG */ /* * Process a beacon or probe response frame. */ void ieee80211_add_scan(struct ieee80211vap *vap, struct ieee80211_channel *curchan, const struct ieee80211_scanparams *sp, const struct ieee80211_frame *wh, int subtype, int rssi, int noise) { struct ieee80211com *ic = vap->iv_ic; return (ic->ic_scan_methods->sc_add_scan(vap, curchan, sp, wh, subtype, rssi, noise)); } /* * Timeout/age scan cache entries; called from sta timeout * timer (XXX should be self-contained). */ void ieee80211_scan_timeout(struct ieee80211com *ic) { struct ieee80211_scan_state *ss = ic->ic_scan; if (ss->ss_ops != NULL) ss->ss_ops->scan_age(ss); } /* * Mark a scan cache entry after a successful associate. */ void ieee80211_scan_assoc_success(struct ieee80211vap *vap, const uint8_t mac[]) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN, mac, "%s", __func__); ss->ss_ops->scan_assoc_success(ss, mac); } } /* * Demerit a scan cache entry after failing to associate. */ void ieee80211_scan_assoc_fail(struct ieee80211vap *vap, const uint8_t mac[], int reason) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN, mac, "%s: reason %u", __func__, reason); ss->ss_ops->scan_assoc_fail(ss, mac, reason); } } /* * Iterate over the contents of the scan cache. */ void ieee80211_scan_iterate(struct ieee80211vap *vap, ieee80211_scan_iter_func *f, void *arg) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL) ss->ss_ops->scan_iterate(ss, f, arg); } /* * Flush the contents of the scan cache. */ void ieee80211_scan_flush(struct ieee80211vap *vap) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL && ss->ss_vap == vap) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s\n", __func__); ss->ss_ops->scan_flush(ss); } } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. */ struct ieee80211_channel * ieee80211_scan_pickchannel(struct ieee80211com *ic, int flags) { struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); if (ss == NULL || ss->ss_ops == NULL || ss->ss_vap == NULL) { /* XXX printf? */ return NULL; } if (ss->ss_ops->scan_pickchan == NULL) { IEEE80211_DPRINTF(ss->ss_vap, IEEE80211_MSG_SCAN, "%s: scan module does not support picking a channel, " "opmode %d\n", __func__, ss->ss_vap->iv_opmode); return NULL; } return ss->ss_ops->scan_pickchan(ss, flags); }