# Makefile.in generated by automake 1.8.3 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # $Id: Makefile.am,v 1.6.26.1 2003/10/13 13:15:39 joda Exp $ # $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ # $Id: Makefile.am.common,v 1.37.2.2 2003/10/13 13:15:39 joda Exp $ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_triplet = @host@ DIST_COMMON = $(heimdal_TEXINFOS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/Makefile.am.common \ $(top_srcdir)/cf/Makefile.am.common mdate-sh subdir = doc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/cf/aix.m4 \ $(top_srcdir)/cf/auth-modules.m4 \ $(top_srcdir)/cf/broken-getaddrinfo.m4 \ $(top_srcdir)/cf/broken-getnameinfo.m4 \ $(top_srcdir)/cf/broken-glob.m4 \ $(top_srcdir)/cf/broken-realloc.m4 \ $(top_srcdir)/cf/broken-snprintf.m4 $(top_srcdir)/cf/broken.m4 \ $(top_srcdir)/cf/broken2.m4 $(top_srcdir)/cf/c-attribute.m4 \ $(top_srcdir)/cf/capabilities.m4 \ $(top_srcdir)/cf/check-compile-et.m4 \ $(top_srcdir)/cf/check-declaration.m4 \ $(top_srcdir)/cf/check-getpwnam_r-posix.m4 \ $(top_srcdir)/cf/check-man.m4 \ $(top_srcdir)/cf/check-netinet-ip-and-tcp.m4 \ $(top_srcdir)/cf/check-type-extra.m4 \ $(top_srcdir)/cf/check-var.m4 $(top_srcdir)/cf/check-x.m4 \ $(top_srcdir)/cf/check-xau.m4 $(top_srcdir)/cf/crypto.m4 \ $(top_srcdir)/cf/db.m4 $(top_srcdir)/cf/destdirs.m4 \ $(top_srcdir)/cf/dlopen.m4 \ $(top_srcdir)/cf/find-func-no-libs.m4 \ $(top_srcdir)/cf/find-func-no-libs2.m4 \ $(top_srcdir)/cf/find-func.m4 \ $(top_srcdir)/cf/find-if-not-broken.m4 \ $(top_srcdir)/cf/have-struct-field.m4 \ $(top_srcdir)/cf/have-type.m4 $(top_srcdir)/cf/irix.m4 \ $(top_srcdir)/cf/krb-bigendian.m4 \ $(top_srcdir)/cf/krb-func-getlogin.m4 \ $(top_srcdir)/cf/krb-ipv6.m4 $(top_srcdir)/cf/krb-prog-ln-s.m4 \ $(top_srcdir)/cf/krb-readline.m4 \ $(top_srcdir)/cf/krb-struct-spwd.m4 \ $(top_srcdir)/cf/krb-struct-winsize.m4 \ $(top_srcdir)/cf/mips-abi.m4 $(top_srcdir)/cf/misc.m4 \ $(top_srcdir)/cf/need-proto.m4 $(top_srcdir)/cf/osfc2.m4 \ $(top_srcdir)/cf/otp.m4 $(top_srcdir)/cf/proto-compat.m4 \ $(top_srcdir)/cf/retsigtype.m4 $(top_srcdir)/cf/roken-frag.m4 \ $(top_srcdir)/cf/sunos.m4 $(top_srcdir)/cf/telnet.m4 \ $(top_srcdir)/cf/test-package.m4 $(top_srcdir)/cf/wflags.m4 \ $(top_srcdir)/cf/with-all.m4 $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/include/config.h CONFIG_CLEAN_FILES = depcomp = am__depfiles_maybe = SOURCES = DIST_SOURCES = INFO_DEPS = $(srcdir)/heimdal.info am__TEXINFO_TEX_DIR = $(srcdir) DVIS = heimdal.dvi PDFS = heimdal.pdf PSS = heimdal.ps HTMLS = heimdal.html TEXINFOS = heimdal.texi TEXI2DVI = texi2dvi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips am__installdirs = "$(DESTDIR)$(infodir)" DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AIX4_FALSE = @AIX4_FALSE@ AIX4_TRUE = @AIX4_TRUE@ AIX_DYNAMIC_AFS_FALSE = @AIX_DYNAMIC_AFS_FALSE@ AIX_DYNAMIC_AFS_TRUE = @AIX_DYNAMIC_AFS_TRUE@ AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@ AIX_FALSE = @AIX_FALSE@ AIX_TRUE = @AIX_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CANONICAL_HOST = @CANONICAL_HOST@ CATMAN = @CATMAN@ CATMANEXT = @CATMANEXT@ CATMAN_FALSE = @CATMAN_FALSE@ CATMAN_TRUE = @CATMAN_TRUE@ CC = @CC@ CFLAGS = @CFLAGS@ COMPILE_ET = @COMPILE_ET@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBLIB = @DBLIB@ DCE_FALSE = @DCE_FALSE@ DCE_TRUE = @DCE_TRUE@ DEFS = @DEFS@ DIR_com_err = @DIR_com_err@ DIR_des = @DIR_des@ DIR_roken = @DIR_roken@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ EXTRA_LIB45 = @EXTRA_LIB45@ F77 = @F77@ FFLAGS = @FFLAGS@ GROFF = @GROFF@ HAVE_DB1_FALSE = @HAVE_DB1_FALSE@ HAVE_DB1_TRUE = @HAVE_DB1_TRUE@ HAVE_DB3_FALSE = @HAVE_DB3_FALSE@ HAVE_DB3_TRUE = @HAVE_DB3_TRUE@ HAVE_DLOPEN_FALSE = @HAVE_DLOPEN_FALSE@ HAVE_DLOPEN_TRUE = @HAVE_DLOPEN_TRUE@ HAVE_NDBM_FALSE = @HAVE_NDBM_FALSE@ HAVE_NDBM_TRUE = @HAVE_NDBM_TRUE@ HAVE_OPENSSL_FALSE = @HAVE_OPENSSL_FALSE@ HAVE_OPENSSL_TRUE = @HAVE_OPENSSL_TRUE@ HAVE_X_FALSE = @HAVE_X_FALSE@ HAVE_X_TRUE = @HAVE_X_TRUE@ INCLUDES_roken = @INCLUDES_roken@ INCLUDE_des = @INCLUDE_des@ INCLUDE_hesiod = @INCLUDE_hesiod@ INCLUDE_krb4 = @INCLUDE_krb4@ INCLUDE_openldap = @INCLUDE_openldap@ INCLUDE_readline = @INCLUDE_readline@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ IRIX_FALSE = @IRIX_FALSE@ IRIX_TRUE = @IRIX_TRUE@ KRB4_FALSE = @KRB4_FALSE@ KRB4_TRUE = @KRB4_TRUE@ KRB5_FALSE = @KRB5_FALSE@ KRB5_TRUE = @KRB5_TRUE@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@ LIB_NDBM = @LIB_NDBM@ LIB_XauFileName = @LIB_XauFileName@ LIB_XauReadAuth = @LIB_XauReadAuth@ LIB_XauWriteAuth = @LIB_XauWriteAuth@ LIB_bswap16 = @LIB_bswap16@ LIB_bswap32 = @LIB_bswap32@ LIB_com_err = @LIB_com_err@ LIB_com_err_a = @LIB_com_err_a@ LIB_com_err_so = @LIB_com_err_so@ LIB_crypt = @LIB_crypt@ LIB_db_create = @LIB_db_create@ LIB_dbm_firstkey = @LIB_dbm_firstkey@ LIB_dbopen = @LIB_dbopen@ LIB_des = @LIB_des@ LIB_des_a = @LIB_des_a@ LIB_des_appl = @LIB_des_appl@ LIB_des_so = @LIB_des_so@ LIB_dlopen = @LIB_dlopen@ LIB_dn_expand = @LIB_dn_expand@ LIB_el_init = @LIB_el_init@ LIB_freeaddrinfo = @LIB_freeaddrinfo@ LIB_gai_strerror = @LIB_gai_strerror@ LIB_getaddrinfo = @LIB_getaddrinfo@ LIB_gethostbyname = @LIB_gethostbyname@ LIB_gethostbyname2 = @LIB_gethostbyname2@ LIB_getnameinfo = @LIB_getnameinfo@ LIB_getpwnam_r = @LIB_getpwnam_r@ LIB_getsockopt = @LIB_getsockopt@ LIB_hesiod = @LIB_hesiod@ LIB_hstrerror = @LIB_hstrerror@ LIB_kdb = @LIB_kdb@ LIB_krb4 = @LIB_krb4@ LIB_krb_disable_debug = @LIB_krb_disable_debug@ LIB_krb_enable_debug = @LIB_krb_enable_debug@ LIB_krb_get_kdc_time_diff = @LIB_krb_get_kdc_time_diff@ LIB_krb_get_our_ip_for_realm = @LIB_krb_get_our_ip_for_realm@ LIB_krb_kdctimeofday = @LIB_krb_kdctimeofday@ LIB_loadquery = @LIB_loadquery@ LIB_logout = @LIB_logout@ LIB_logwtmp = @LIB_logwtmp@ LIB_openldap = @LIB_openldap@ LIB_openpty = @LIB_openpty@ LIB_otp = @LIB_otp@ LIB_pidfile = @LIB_pidfile@ LIB_readline = @LIB_readline@ LIB_res_nsearch = @LIB_res_nsearch@ LIB_res_search = @LIB_res_search@ LIB_roken = @LIB_roken@ LIB_security = @LIB_security@ LIB_setsockopt = @LIB_setsockopt@ LIB_socket = @LIB_socket@ LIB_syslog = @LIB_syslog@ LIB_tgetent = @LIB_tgetent@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ NEED_WRITEAUTH_FALSE = @NEED_WRITEAUTH_FALSE@ NEED_WRITEAUTH_TRUE = @NEED_WRITEAUTH_TRUE@ NROFF = @NROFF@ OBJEXT = @OBJEXT@ OTP_FALSE = @OTP_FALSE@ OTP_TRUE = @OTP_TRUE@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ VOID_RETSIGTYPE = @VOID_RETSIGTYPE@ WFLAGS = @WFLAGS@ WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@ WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@ X_CFLAGS = @X_CFLAGS@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_LIBS = @X_LIBS@ X_PRE_LIBS = @X_PRE_LIBS@ YACC = @YACC@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__leading_dot = @am__leading_dot@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ do_roken_rename_FALSE = @do_roken_rename_FALSE@ do_roken_rename_TRUE = @do_roken_rename_TRUE@ dpagaix_cflags = @dpagaix_cflags@ dpagaix_ldadd = @dpagaix_ldadd@ dpagaix_ldflags = @dpagaix_ldflags@ el_compat_FALSE = @el_compat_FALSE@ el_compat_TRUE = @el_compat_TRUE@ exec_prefix = @exec_prefix@ have_err_h_FALSE = @have_err_h_FALSE@ have_err_h_TRUE = @have_err_h_TRUE@ have_fnmatch_h_FALSE = @have_fnmatch_h_FALSE@ have_fnmatch_h_TRUE = @have_fnmatch_h_TRUE@ have_glob_h_FALSE = @have_glob_h_FALSE@ have_glob_h_TRUE = @have_glob_h_TRUE@ have_ifaddrs_h_FALSE = @have_ifaddrs_h_FALSE@ have_ifaddrs_h_TRUE = @have_ifaddrs_h_TRUE@ have_vis_h_FALSE = @have_vis_h_FALSE@ have_vis_h_TRUE = @have_vis_h_TRUE@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) @do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME AM_CFLAGS = $(WFLAGS) CP = cp buildinclude = $(top_builddir)/include LIB_getattr = @LIB_getattr@ LIB_getpwent_r = @LIB_getpwent_r@ LIB_odm_initialize = @LIB_odm_initialize@ LIB_setpcred = @LIB_setpcred@ HESIODLIB = @HESIODLIB@ HESIODINCLUDE = @HESIODINCLUDE@ NROFF_MAN = groff -mandoc -Tascii LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) @KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ @KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la @KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la @DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la AUTOMAKE_OPTIONS = no-texinfo.tex info_TEXINFOS = heimdal.texi heimdal_TEXINFOS = intro.texi install.texi setup.texi kerberos4.texi all: all-am .SUFFIXES: .SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .dvi .html .info .pdf .ps .texi $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign --ignore-deps doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool .texi.info: restore=: && \ backupdir="$(am__leading_dot)am$$$$" && \ am__cwd=`pwd` && cd $(srcdir) && \ rm -rf $$backupdir && mkdir $$backupdir && \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then \ mv $$f $$backupdir; \ restore=mv; \ fi; \ done; \ cd "$$am__cwd"; \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ $<; \ then \ rc=0; \ cd $(srcdir); \ else \ rc=$$?; \ cd $(srcdir) && \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; \ exit $$rc .texi.dvi: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2DVI) $< .texi.pdf: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2PDF) $< .texi.html: $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ $< if test ! -d $@ && test -d $(@:.html=); then \ mv $(@:.html=) $@; else :; fi $(srcdir)/heimdal.info: heimdal.texi $(heimdal_TEXINFOS) heimdal.dvi: heimdal.texi $(heimdal_TEXINFOS) heimdal.pdf: heimdal.texi $(heimdal_TEXINFOS) heimdal.html: heimdal.texi $(heimdal_TEXINFOS) .dvi.ps: $(DVIPS) -o $@ $< uninstall-info-am: $(PRE_UNINSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ (if cd "$(DESTDIR)$(infodir)"; then \ echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ else :; fi); \ done dist-info: $(INFO_DEPS) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for base in $$list; do \ case $$base in \ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$base; then d=.; else d=$(srcdir); fi; \ for file in $$d/$$base*; do \ relfile=`expr "$$file" : "$$d/\(.*\)"`; \ test -f $(distdir)/$$relfile || \ cp -p $$file $(distdir)/$$relfile; \ done; \ done mostlyclean-aminfo: -rm -rf heimdal.aux heimdal.cp heimdal.cps heimdal.fn heimdal.fns heimdal.ky \ heimdal.kys heimdal.log heimdal.pg heimdal.tmp heimdal.toc \ heimdal.tp heimdal.tps heimdal.vr heimdal.vrs heimdal.dvi \ heimdal.pdf heimdal.ps heimdal.html maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) $(mkdir_p) $(distdir)/.. $(distdir)/../cf @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-info dist-hook check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-local check: check-am all-am: Makefile $(INFO_DEPS) all-local installdirs: for dir in "$(DESTDIR)$(infodir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool dvi: dvi-am dvi-am: $(DVIS) html: html-am html-am: $(HTMLS) info: info-am info-am: $(INFO_DEPS) install-data-am: install-info-am @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-exec-am: @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-exec-hook install-info: install-info-am install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)" @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ if test -f $$ifile; then \ relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ else : ; fi; \ done; \ done @$(POST_INSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-aminfo \ maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: $(PDFS) ps: ps-am ps-am: $(PSS) uninstall-am: uninstall-info-am .PHONY: all all-am all-local check check-am check-local clean \ clean-generic clean-libtool dist-info distclean \ distclean-generic distclean-libtool distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-man install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-aminfo maintainer-clean-generic mostlyclean \ mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \ pdf-am ps ps-am uninstall uninstall-am uninstall-info-am install-suid-programs: @foo='$(bin_SUIDS)'; \ for file in $$foo; do \ x=$(DESTDIR)$(bindir)/$$file; \ if chown 0:0 $$x && chmod u+s $$x; then :; else \ echo "*"; \ echo "* Failed to install $$x setuid root"; \ echo "*"; \ fi; done install-exec-hook: install-suid-programs install-build-headers:: $(include_HEADERS) $(build_HEADERZ) @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ for f in $$foo; do \ f=`basename $$f`; \ if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ else file="$$f"; fi; \ if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ : ; else \ echo " $(CP) $$file $(buildinclude)/$$f"; \ $(CP) $$file $(buildinclude)/$$f; \ fi ; \ done all-local: install-build-headers check-local:: @if test '$(CHECK_LOCAL)'; then \ foo='$(CHECK_LOCAL)'; else \ foo='$(PROGRAMS)'; fi; \ if test "$$foo"; then \ failed=0; all=0; \ for i in $$foo; do \ all=`expr $$all + 1`; \ if ./$$i --version > /dev/null 2>&1; then \ echo "PASS: $$i"; \ else \ echo "FAIL: $$i"; \ failed=`expr $$failed + 1`; \ fi; \ done; \ if test "$$failed" -eq 0; then \ banner="All $$all tests passed"; \ else \ banner="$$failed of $$all tests failed"; \ fi; \ dashes=`echo "$$banner" | sed s/./=/g`; \ echo "$$dashes"; \ echo "$$banner"; \ echo "$$dashes"; \ test "$$failed" -eq 0; \ fi .x.c: @cmp -s $< $@ 2> /dev/null || cp $< $@ #NROFF_MAN = nroff -man .1.cat1: $(NROFF_MAN) $< > $@ .3.cat3: $(NROFF_MAN) $< > $@ .5.cat5: $(NROFF_MAN) $< > $@ .8.cat8: $(NROFF_MAN) $< > $@ dist-cat1-mans: @foo='$(man1_MANS)'; \ bar='$(man_MANS)'; \ for i in $$bar; do \ case $$i in \ *.1) foo="$$foo $$i";; \ esac; done ;\ for i in $$foo; do \ x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ done dist-cat3-mans: @foo='$(man3_MANS)'; \ bar='$(man_MANS)'; \ for i in $$bar; do \ case $$i in \ *.3) foo="$$foo $$i";; \ esac; done ;\ for i in $$foo; do \ x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ done dist-cat5-mans: @foo='$(man5_MANS)'; \ bar='$(man_MANS)'; \ for i in $$bar; do \ case $$i in \ *.5) foo="$$foo $$i";; \ esac; done ;\ for i in $$foo; do \ x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ done dist-cat8-mans: @foo='$(man8_MANS)'; \ bar='$(man_MANS)'; \ for i in $$bar; do \ case $$i in \ *.8) foo="$$foo $$i";; \ esac; done ;\ for i in $$foo; do \ x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ done dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans install-cat-mans: $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) install-data-hook: install-cat-mans .et.h: $(COMPILE_ET) $< .et.c: $(COMPILE_ET) $< # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: