/* * WPA Supplicant / EAP state machines (RFC 4137) * Copyright (c) 2004-2005, Jouni Malinen * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Alternatively, this software may be distributed under the terms of BSD * license. * * See README and COPYING for more details. * * This file implements the Peer State Machine as defined in RFC 4137. The used * states and state transitions match mostly with the RFC. However, there are * couple of additional transitions for working around small issues noticed * during testing. These exceptions are explained in comments within the * functions in this file. The method functions, m.func(), are similar to the * ones used in RFC 4137, but some small changes have used here to optimize * operations and to add functionality needed for fast re-authentication * (session resumption). */ #include #include #include #include #include "common.h" #include "eap_i.h" #include "wpa_supplicant.h" #include "config_ssid.h" #include "tls.h" #include "crypto.h" #include "pcsc_funcs.h" #include "wpa_ctrl.h" #define EAP_MAX_AUTH_ROUNDS 50 #ifdef EAP_MD5 extern const struct eap_method eap_method_md5; #endif #ifdef EAP_TLS extern const struct eap_method eap_method_tls; #endif #ifdef EAP_MSCHAPv2 extern const struct eap_method eap_method_mschapv2; #endif #ifdef EAP_PEAP extern const struct eap_method eap_method_peap; #endif #ifdef EAP_TTLS extern const struct eap_method eap_method_ttls; #endif #ifdef EAP_GTC extern const struct eap_method eap_method_gtc; #endif #ifdef EAP_OTP extern const struct eap_method eap_method_otp; #endif #ifdef EAP_SIM extern const struct eap_method eap_method_sim; #endif #ifdef EAP_LEAP extern const struct eap_method eap_method_leap; #endif #ifdef EAP_PSK extern const struct eap_method eap_method_psk; #endif #ifdef EAP_AKA extern const struct eap_method eap_method_aka; #endif #ifdef EAP_FAST extern const struct eap_method eap_method_fast; #endif #ifdef EAP_PAX extern const struct eap_method eap_method_pax; #endif static const struct eap_method *eap_methods[] = { #ifdef EAP_MD5 &eap_method_md5, #endif #ifdef EAP_TLS &eap_method_tls, #endif #ifdef EAP_MSCHAPv2 &eap_method_mschapv2, #endif #ifdef EAP_PEAP &eap_method_peap, #endif #ifdef EAP_TTLS &eap_method_ttls, #endif #ifdef EAP_GTC &eap_method_gtc, #endif #ifdef EAP_OTP &eap_method_otp, #endif #ifdef EAP_SIM &eap_method_sim, #endif #ifdef EAP_LEAP &eap_method_leap, #endif #ifdef EAP_PSK &eap_method_psk, #endif #ifdef EAP_AKA &eap_method_aka, #endif #ifdef EAP_FAST &eap_method_fast, #endif #ifdef EAP_PAX &eap_method_pax, #endif }; #define NUM_EAP_METHODS (sizeof(eap_methods) / sizeof(eap_methods[0])) /** * eap_sm_get_eap_methods - Get EAP method based on type number * @method: EAP type number * Returns: Pointer to EAP method of %NULL if not found */ const struct eap_method * eap_sm_get_eap_methods(int method) { int i; for (i = 0; i < NUM_EAP_METHODS; i++) { if (eap_methods[i]->method == method) return eap_methods[i]; } return NULL; } static Boolean eap_sm_allowMethod(struct eap_sm *sm, EapType method); static u8 * eap_sm_buildNak(struct eap_sm *sm, int id, size_t *len); static void eap_sm_processIdentity(struct eap_sm *sm, const u8 *req, size_t len); static void eap_sm_processNotify(struct eap_sm *sm, const u8 *req, size_t len); static u8 * eap_sm_buildNotify(struct eap_sm *sm, int id, size_t *len); static void eap_sm_parseEapReq(struct eap_sm *sm, const u8 *req, size_t len); static const char * eap_sm_method_state_txt(EapMethodState state); static const char * eap_sm_decision_txt(EapDecision decision); /* Definitions for clarifying state machine implementation */ #define SM_STATE(machine, state) \ static void sm_ ## machine ## _ ## state ## _Enter(struct eap_sm *sm, \ int global) #define SM_ENTRY(machine, state) \ if (!global || sm->machine ## _state != machine ## _ ## state) { \ sm->changed = TRUE; \ wpa_printf(MSG_DEBUG, "EAP: " #machine " entering state " #state); \ } \ sm->machine ## _state = machine ## _ ## state; #define SM_ENTER(machine, state) \ sm_ ## machine ## _ ## state ## _Enter(sm, 0) #define SM_ENTER_GLOBAL(machine, state) \ sm_ ## machine ## _ ## state ## _Enter(sm, 1) #define SM_STEP(machine) \ static void sm_ ## machine ## _Step(struct eap_sm *sm) #define SM_STEP_RUN(machine) sm_ ## machine ## _Step(sm) static Boolean eapol_get_bool(struct eap_sm *sm, enum eapol_bool_var var) { return sm->eapol_cb->get_bool(sm->eapol_ctx, var); } static void eapol_set_bool(struct eap_sm *sm, enum eapol_bool_var var, Boolean value) { sm->eapol_cb->set_bool(sm->eapol_ctx, var, value); } static unsigned int eapol_get_int(struct eap_sm *sm, enum eapol_int_var var) { return sm->eapol_cb->get_int(sm->eapol_ctx, var); } static void eapol_set_int(struct eap_sm *sm, enum eapol_int_var var, unsigned int value) { sm->eapol_cb->set_int(sm->eapol_ctx, var, value); } static u8 * eapol_get_eapReqData(struct eap_sm *sm, size_t *len) { return sm->eapol_cb->get_eapReqData(sm->eapol_ctx, len); } static void eap_deinit_prev_method(struct eap_sm *sm, const char *txt) { if (sm->m == NULL || sm->eap_method_priv == NULL) return; wpa_printf(MSG_DEBUG, "EAP: deinitialize previously used EAP method " "(%d, %s) at %s", sm->selectedMethod, sm->m->name, txt); sm->m->deinit(sm, sm->eap_method_priv); sm->eap_method_priv = NULL; sm->m = NULL; } /* * This state initializes state machine variables when the machine is * activated (portEnabled = TRUE). This is also used when re-starting * authentication (eapRestart == TRUE). */ SM_STATE(EAP, INITIALIZE) { SM_ENTRY(EAP, INITIALIZE); if (sm->fast_reauth && sm->m && sm->m->has_reauth_data && sm->m->has_reauth_data(sm, sm->eap_method_priv)) { wpa_printf(MSG_DEBUG, "EAP: maintaining EAP method data for " "fast reauthentication"); sm->m->deinit_for_reauth(sm, sm->eap_method_priv); } else { eap_deinit_prev_method(sm, "INITIALIZE"); } sm->selectedMethod = EAP_TYPE_NONE; sm->methodState = METHOD_NONE; sm->allowNotifications = TRUE; sm->decision = DECISION_FAIL; eapol_set_int(sm, EAPOL_idleWhile, sm->ClientTimeout); eapol_set_bool(sm, EAPOL_eapSuccess, FALSE); eapol_set_bool(sm, EAPOL_eapFail, FALSE); free(sm->eapKeyData); sm->eapKeyData = NULL; sm->eapKeyAvailable = FALSE; eapol_set_bool(sm, EAPOL_eapRestart, FALSE); sm->lastId = -1; /* new session - make sure this does not match with * the first EAP-Packet */ /* * RFC 4137 does not reset eapResp and eapNoResp here. However, this * seemed to be able to trigger cases where both were set and if EAPOL * state machine uses eapNoResp first, it may end up not sending a real * reply correctly. This occurred when the workaround in FAIL state set * eapNoResp = TRUE.. Maybe that workaround needs to be fixed to do * something else(?) */ eapol_set_bool(sm, EAPOL_eapResp, FALSE); eapol_set_bool(sm, EAPOL_eapNoResp, FALSE); sm->num_rounds = 0; } /* * This state is reached whenever service from the lower layer is interrupted * or unavailable (portEnabled == FALSE). Immediate transition to INITIALIZE * occurs when the port becomes enabled. */ SM_STATE(EAP, DISABLED) { SM_ENTRY(EAP, DISABLED); sm->num_rounds = 0; } /* * The state machine spends most of its time here, waiting for something to * happen. This state is entered unconditionally from INITIALIZE, DISCARD, and * SEND_RESPONSE states. */ SM_STATE(EAP, IDLE) { SM_ENTRY(EAP, IDLE); } /* * This state is entered when an EAP packet is received (eapReq == TRUE) to * parse the packet header. */ SM_STATE(EAP, RECEIVED) { const u8 *eapReqData; size_t eapReqDataLen; SM_ENTRY(EAP, RECEIVED); eapReqData = eapol_get_eapReqData(sm, &eapReqDataLen); /* parse rxReq, rxSuccess, rxFailure, reqId, reqMethod */ eap_sm_parseEapReq(sm, eapReqData, eapReqDataLen); sm->num_rounds++; } /* * This state is entered when a request for a new type comes in. Either the * correct method is started, or a Nak response is built. */ SM_STATE(EAP, GET_METHOD) { SM_ENTRY(EAP, GET_METHOD); if (eap_sm_allowMethod(sm, sm->reqMethod)) { int reinit = 0; /* * RFC 4137 does not define specific operation for fast * re-authentication (session resumption). The design here is * to allow the previously used method data to be maintained * for re-authentication if the method support session * resumption. Otherwise, the previously used method data is * freed and a new method is allocated here. */ if (sm->fast_reauth && sm->m && sm->m->method == sm->reqMethod && sm->m->has_reauth_data && sm->m->has_reauth_data(sm, sm->eap_method_priv)) { wpa_printf(MSG_DEBUG, "EAP: Using previous method data" " for fast re-authentication"); reinit = 1; } else eap_deinit_prev_method(sm, "GET_METHOD"); sm->selectedMethod = sm->reqMethod; if (sm->m == NULL) sm->m = eap_sm_get_eap_methods(sm->selectedMethod); if (sm->m) { wpa_printf(MSG_DEBUG, "EAP: Initialize selected EAP " "method (%d, %s)", sm->selectedMethod, sm->m->name); if (reinit) sm->eap_method_priv = sm->m->init_for_reauth( sm, sm->eap_method_priv); else sm->eap_method_priv = sm->m->init(sm); if (sm->eap_method_priv == NULL) { struct wpa_ssid *config = eap_get_config(sm); wpa_msg(sm->msg_ctx, MSG_INFO, "EAP: Failed to initialize EAP method " "%d (%s)", sm->selectedMethod, sm->m->name); sm->m = NULL; sm->methodState = METHOD_NONE; sm->selectedMethod = EAP_TYPE_NONE; if (sm->reqMethod == EAP_TYPE_TLS && config && (config->pending_req_pin || config->pending_req_passphrase)) { /* * Return without generating Nak in * order to allow entering of PIN code * or passphrase to retry the current * EAP packet. */ wpa_printf(MSG_DEBUG, "EAP: Pending " "PIN/passphrase request - " "skip Nak"); return; } } else { sm->methodState = METHOD_INIT; wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_METHOD "EAP method %d (%s) selected", sm->selectedMethod, sm->m->name); return; } } } free(sm->eapRespData); sm->eapRespData = eap_sm_buildNak(sm, sm->reqId, &sm->eapRespDataLen); } /* * The method processing happens here. The request from the authenticator is * processed, and an appropriate response packet is built. */ SM_STATE(EAP, METHOD) { u8 *eapReqData; size_t eapReqDataLen; struct eap_method_ret ret; SM_ENTRY(EAP, METHOD); if (sm->m == NULL) { wpa_printf(MSG_WARNING, "EAP::METHOD - method not selected"); return; } eapReqData = eapol_get_eapReqData(sm, &eapReqDataLen); /* * Get ignore, methodState, decision, allowNotifications, and * eapRespData. RFC 4137 uses three separate method procedure (check, * process, and buildResp) in this state. These have been combined into * a single function call to m->process() in order to optimize EAP * method implementation interface a bit. These procedures are only * used from within this METHOD state, so there is no need to keep * these as separate C functions. * * The RFC 4137 procedures return values as follows: * ignore = m.check(eapReqData) * (methodState, decision, allowNotifications) = m.process(eapReqData) * eapRespData = m.buildResp(reqId) */ memset(&ret, 0, sizeof(ret)); ret.ignore = sm->ignore; ret.methodState = sm->methodState; ret.decision = sm->decision; ret.allowNotifications = sm->allowNotifications; free(sm->eapRespData); sm->eapRespData = sm->m->process(sm, sm->eap_method_priv, &ret, eapReqData, eapReqDataLen, &sm->eapRespDataLen); wpa_printf(MSG_DEBUG, "EAP: method process -> ignore=%s " "methodState=%s decision=%s", ret.ignore ? "TRUE" : "FALSE", eap_sm_method_state_txt(ret.methodState), eap_sm_decision_txt(ret.decision)); sm->ignore = ret.ignore; if (sm->ignore) return; sm->methodState = ret.methodState; sm->decision = ret.decision; sm->allowNotifications = ret.allowNotifications; if (sm->m->isKeyAvailable && sm->m->getKey && sm->m->isKeyAvailable(sm, sm->eap_method_priv)) { free(sm->eapKeyData); sm->eapKeyData = sm->m->getKey(sm, sm->eap_method_priv, &sm->eapKeyDataLen); } } /* * This state signals the lower layer that a response packet is ready to be * sent. */ SM_STATE(EAP, SEND_RESPONSE) { SM_ENTRY(EAP, SEND_RESPONSE); free(sm->lastRespData); if (sm->eapRespData) { if (sm->workaround) memcpy(sm->last_md5, sm->req_md5, 16); sm->lastId = sm->reqId; sm->lastRespData = malloc(sm->eapRespDataLen); if (sm->lastRespData) { memcpy(sm->lastRespData, sm->eapRespData, sm->eapRespDataLen); sm->lastRespDataLen = sm->eapRespDataLen; } eapol_set_bool(sm, EAPOL_eapResp, TRUE); } else sm->lastRespData = NULL; eapol_set_bool(sm, EAPOL_eapReq, FALSE); eapol_set_int(sm, EAPOL_idleWhile, sm->ClientTimeout); } /* * This state signals the lower layer that the request was discarded, and no * response packet will be sent at this time. */ SM_STATE(EAP, DISCARD) { SM_ENTRY(EAP, DISCARD); eapol_set_bool(sm, EAPOL_eapReq, FALSE); eapol_set_bool(sm, EAPOL_eapNoResp, TRUE); } /* * Handles requests for Identity method and builds a response. */ SM_STATE(EAP, IDENTITY) { const u8 *eapReqData; size_t eapReqDataLen; SM_ENTRY(EAP, IDENTITY); eapReqData = eapol_get_eapReqData(sm, &eapReqDataLen); eap_sm_processIdentity(sm, eapReqData, eapReqDataLen); free(sm->eapRespData); sm->eapRespData = eap_sm_buildIdentity(sm, sm->reqId, &sm->eapRespDataLen, 0); } /* * Handles requests for Notification method and builds a response. */ SM_STATE(EAP, NOTIFICATION) { const u8 *eapReqData; size_t eapReqDataLen; SM_ENTRY(EAP, NOTIFICATION); eapReqData = eapol_get_eapReqData(sm, &eapReqDataLen); eap_sm_processNotify(sm, eapReqData, eapReqDataLen); free(sm->eapRespData); sm->eapRespData = eap_sm_buildNotify(sm, sm->reqId, &sm->eapRespDataLen); } /* * This state retransmits the previous response packet. */ SM_STATE(EAP, RETRANSMIT) { SM_ENTRY(EAP, RETRANSMIT); free(sm->eapRespData); if (sm->lastRespData) { sm->eapRespData = malloc(sm->lastRespDataLen); if (sm->eapRespData) { memcpy(sm->eapRespData, sm->lastRespData, sm->lastRespDataLen); sm->eapRespDataLen = sm->lastRespDataLen; } } else sm->eapRespData = NULL; } /* * This state is entered in case of a successful completion of authentication * and state machine waits here until port is disabled or EAP authentication is * restarted. */ SM_STATE(EAP, SUCCESS) { SM_ENTRY(EAP, SUCCESS); if (sm->eapKeyData != NULL) sm->eapKeyAvailable = TRUE; eapol_set_bool(sm, EAPOL_eapSuccess, TRUE); /* * RFC 4137 does not clear eapReq here, but this seems to be required * to avoid processing the same request twice when state machine is * initialized. */ eapol_set_bool(sm, EAPOL_eapReq, FALSE); /* * RFC 4137 does not set eapNoResp here, but this seems to be required * to get EAPOL Supplicant backend state machine into SUCCESS state. In * addition, either eapResp or eapNoResp is required to be set after * processing the received EAP frame. */ eapol_set_bool(sm, EAPOL_eapNoResp, TRUE); wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_SUCCESS "EAP authentication completed successfully"); } /* * This state is entered in case of a failure and state machine waits here * until port is disabled or EAP authentication is restarted. */ SM_STATE(EAP, FAILURE) { SM_ENTRY(EAP, FAILURE); eapol_set_bool(sm, EAPOL_eapFail, TRUE); /* * RFC 4137 does not clear eapReq here, but this seems to be required * to avoid processing the same request twice when state machine is * initialized. */ eapol_set_bool(sm, EAPOL_eapReq, FALSE); /* * RFC 4137 does not set eapNoResp here. However, either eapResp or * eapNoResp is required to be set after processing the received EAP * frame. */ eapol_set_bool(sm, EAPOL_eapNoResp, TRUE); wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_FAILURE "EAP authentication failed"); } static int eap_success_workaround(struct eap_sm *sm, int reqId, int lastId) { /* * At least Microsoft IAS and Meetinghouse Aegis seem to be sending * EAP-Success/Failure with lastId + 1 even though RFC 3748 and * RFC 4137 require that reqId == lastId. In addition, it looks like * Ringmaster v2.1.2.0 would be using lastId + 2 in EAP-Success. * * Accept this kind of Id if EAP workarounds are enabled. These are * unauthenticated plaintext messages, so this should have minimal * security implications (bit easier to fake EAP-Success/Failure). */ if (sm->workaround && (reqId == ((lastId + 1) & 0xff) || reqId == ((lastId + 2) & 0xff))) { wpa_printf(MSG_DEBUG, "EAP: Workaround for unexpected " "identifier field in EAP Success: " "reqId=%d lastId=%d (these are supposed to be " "same)", reqId, lastId); return 1; } wpa_printf(MSG_DEBUG, "EAP: EAP-Success Id mismatch - reqId=%d " "lastId=%d", reqId, lastId); return 0; } /* * RFC 4137 - Appendix A.1: EAP Peer State Machine - State transitions */ SM_STEP(EAP) { int duplicate; if (eapol_get_bool(sm, EAPOL_eapRestart) && eapol_get_bool(sm, EAPOL_portEnabled)) SM_ENTER_GLOBAL(EAP, INITIALIZE); else if (!eapol_get_bool(sm, EAPOL_portEnabled) || sm->force_disabled) SM_ENTER_GLOBAL(EAP, DISABLED); else if (sm->num_rounds > EAP_MAX_AUTH_ROUNDS) { /* RFC 4137 does not place any limit on number of EAP messages * in an authentication session. However, some error cases have * ended up in a state were EAP messages were sent between the * peer and server in a loop (e.g., TLS ACK frame in both * direction). Since this is quite undesired outcome, limit the * total number of EAP round-trips and abort authentication if * this limit is exceeded. */ if (sm->num_rounds == EAP_MAX_AUTH_ROUNDS + 1) { wpa_msg(sm->msg_ctx, MSG_INFO, "EAP: more than %d " "authentication rounds - abort", EAP_MAX_AUTH_ROUNDS); sm->num_rounds++; SM_ENTER_GLOBAL(EAP, FAILURE); } } else switch (sm->EAP_state) { case EAP_INITIALIZE: SM_ENTER(EAP, IDLE); break; case EAP_DISABLED: if (eapol_get_bool(sm, EAPOL_portEnabled) && !sm->force_disabled) SM_ENTER(EAP, INITIALIZE); break; case EAP_IDLE: /* * The first three transitions are from RFC 4137. The last two * are local additions to handle special cases with LEAP and * PEAP server not sending EAP-Success in some cases. */ if (eapol_get_bool(sm, EAPOL_eapReq)) SM_ENTER(EAP, RECEIVED); else if ((eapol_get_bool(sm, EAPOL_altAccept) && sm->decision != DECISION_FAIL) || (eapol_get_int(sm, EAPOL_idleWhile) == 0 && sm->decision == DECISION_UNCOND_SUCC)) SM_ENTER(EAP, SUCCESS); else if (eapol_get_bool(sm, EAPOL_altReject) || (eapol_get_int(sm, EAPOL_idleWhile) == 0 && sm->decision != DECISION_UNCOND_SUCC) || (eapol_get_bool(sm, EAPOL_altAccept) && sm->methodState != METHOD_CONT && sm->decision == DECISION_FAIL)) SM_ENTER(EAP, FAILURE); else if (sm->selectedMethod == EAP_TYPE_LEAP && sm->leap_done && sm->decision != DECISION_FAIL && sm->methodState == METHOD_DONE) SM_ENTER(EAP, SUCCESS); else if (sm->selectedMethod == EAP_TYPE_PEAP && sm->peap_done && sm->decision != DECISION_FAIL && sm->methodState == METHOD_DONE) SM_ENTER(EAP, SUCCESS); break; case EAP_RECEIVED: duplicate = (sm->reqId == sm->lastId) && sm->rxReq; if (sm->workaround && duplicate && memcmp(sm->req_md5, sm->last_md5, 16) != 0) { /* * RFC 4137 uses (reqId == lastId) as the only * verification for duplicate EAP requests. However, * this misses cases where the AS is incorrectly using * the same id again; and unfortunately, such * implementations exist. Use MD5 hash as an extra * verification for the packets being duplicate to * workaround these issues. */ wpa_printf(MSG_DEBUG, "EAP: AS used the same Id again," " but EAP packets were not identical"); wpa_printf(MSG_DEBUG, "EAP: workaround - assume this " "is not a duplicate packet"); duplicate = 0; } /* * Two special cases below for LEAP are local additions to work * around odd LEAP behavior (EAP-Success in the middle of * authentication and then swapped roles). Other transitions * are based on RFC 4137. */ if (sm->rxSuccess && sm->decision != DECISION_FAIL && (sm->reqId == sm->lastId || eap_success_workaround(sm, sm->reqId, sm->lastId))) SM_ENTER(EAP, SUCCESS); else if (sm->methodState != METHOD_CONT && ((sm->rxFailure && sm->decision != DECISION_UNCOND_SUCC) || (sm->rxSuccess && sm->decision == DECISION_FAIL && (sm->selectedMethod != EAP_TYPE_LEAP || sm->methodState != METHOD_MAY_CONT))) && (sm->reqId == sm->lastId || eap_success_workaround(sm, sm->reqId, sm->lastId))) SM_ENTER(EAP, FAILURE); else if (sm->rxReq && duplicate) SM_ENTER(EAP, RETRANSMIT); else if (sm->rxReq && !duplicate && sm->reqMethod == EAP_TYPE_NOTIFICATION && sm->allowNotifications) SM_ENTER(EAP, NOTIFICATION); else if (sm->rxReq && !duplicate && sm->selectedMethod == EAP_TYPE_NONE && sm->reqMethod == EAP_TYPE_IDENTITY) SM_ENTER(EAP, IDENTITY); else if (sm->rxReq && !duplicate && sm->selectedMethod == EAP_TYPE_NONE && sm->reqMethod != EAP_TYPE_IDENTITY && sm->reqMethod != EAP_TYPE_NOTIFICATION) SM_ENTER(EAP, GET_METHOD); else if (sm->rxReq && !duplicate && sm->reqMethod == sm->selectedMethod && sm->methodState != METHOD_DONE) SM_ENTER(EAP, METHOD); else if (sm->selectedMethod == EAP_TYPE_LEAP && (sm->rxSuccess || sm->rxResp)) SM_ENTER(EAP, METHOD); else SM_ENTER(EAP, DISCARD); break; case EAP_GET_METHOD: if (sm->selectedMethod == sm->reqMethod) SM_ENTER(EAP, METHOD); else SM_ENTER(EAP, SEND_RESPONSE); break; case EAP_METHOD: if (sm->ignore) SM_ENTER(EAP, DISCARD); else SM_ENTER(EAP, SEND_RESPONSE); break; case EAP_SEND_RESPONSE: SM_ENTER(EAP, IDLE); break; case EAP_DISCARD: SM_ENTER(EAP, IDLE); break; case EAP_IDENTITY: SM_ENTER(EAP, SEND_RESPONSE); break; case EAP_NOTIFICATION: SM_ENTER(EAP, SEND_RESPONSE); break; case EAP_RETRANSMIT: SM_ENTER(EAP, SEND_RESPONSE); break; case EAP_SUCCESS: break; case EAP_FAILURE: break; } } static Boolean eap_sm_allowMethod(struct eap_sm *sm, EapType method) { struct wpa_ssid *config = eap_get_config(sm); int i; if (!wpa_config_allowed_eap_method(config, method)) return FALSE; for (i = 0; i < NUM_EAP_METHODS; i++) { if (eap_methods[i]->method == method) return TRUE; } return FALSE; } static u8 * eap_sm_buildNak(struct eap_sm *sm, int id, size_t *len) { struct wpa_ssid *config = eap_get_config(sm); struct eap_hdr *resp; u8 *pos; int i, found = 0; wpa_printf(MSG_DEBUG, "EAP: Building EAP-Nak (requested type %d not " "allowed)", sm->reqMethod); *len = sizeof(struct eap_hdr) + 1; resp = malloc(*len + NUM_EAP_METHODS); if (resp == NULL) return NULL; resp->code = EAP_CODE_RESPONSE; resp->identifier = id; pos = (u8 *) (resp + 1); *pos++ = EAP_TYPE_NAK; for (i = 0; i < NUM_EAP_METHODS; i++) { if (eap_methods[i]->method != sm->reqMethod && wpa_config_allowed_eap_method(config, eap_methods[i]->method)) { *pos++ = eap_methods[i]->method; (*len)++; found++; } } if (!found) { *pos = EAP_TYPE_NONE; (*len)++; } wpa_hexdump(MSG_DEBUG, "EAP: allowed methods", ((u8 *) (resp + 1)) + 1, found); resp->length = host_to_be16(*len); return (u8 *) resp; } static void eap_sm_processIdentity(struct eap_sm *sm, const u8 *req, size_t len) { const struct eap_hdr *hdr = (const struct eap_hdr *) req; const u8 *pos = (const u8 *) (hdr + 1); pos++; wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_STARTED "EAP authentication started"); /* * RFC 3748 - 5.1: Identity * Data field may contain a displayable message in UTF-8. If this * includes NUL-character, only the data before that should be * displayed. Some EAP implementasitons may piggy-back additional * options after the NUL. */ /* TODO: could save displayable message so that it can be shown to the * user in case of interaction is required */ wpa_hexdump_ascii(MSG_DEBUG, "EAP: EAP-Request Identity data", pos, be_to_host16(hdr->length) - 5); } static int eap_sm_imsi_identity(struct eap_sm *sm, struct wpa_ssid *ssid) { int aka = 0; char imsi[100]; size_t imsi_len; u8 *pos = ssid->eap_methods; imsi_len = sizeof(imsi); if (scard_get_imsi(sm->scard_ctx, imsi, &imsi_len)) { wpa_printf(MSG_WARNING, "Failed to get IMSI from SIM"); return -1; } wpa_hexdump_ascii(MSG_DEBUG, "IMSI", (u8 *) imsi, imsi_len); while (pos && *pos != EAP_TYPE_NONE) { if (*pos == EAP_TYPE_AKA) { aka = 1; break; } pos++; } free(ssid->identity); ssid->identity = malloc(1 + imsi_len); if (ssid->identity == NULL) { wpa_printf(MSG_WARNING, "Failed to allocate buffer for " "IMSI-based identity"); return -1; } ssid->identity[0] = aka ? '0' : '1'; memcpy(ssid->identity + 1, imsi, imsi_len); ssid->identity_len = 1 + imsi_len; return 0; } static int eap_sm_get_scard_identity(struct eap_sm *sm, struct wpa_ssid *ssid) { if (scard_set_pin(sm->scard_ctx, ssid->pin)) { /* * Make sure the same PIN is not tried again in order to avoid * blocking SIM. */ free(ssid->pin); ssid->pin = NULL; wpa_printf(MSG_WARNING, "PIN validation failed"); eap_sm_request_pin(sm, ssid); return -1; } return eap_sm_imsi_identity(sm, ssid); } /** * eap_sm_buildIdentity - Build EAP-Identity/Response for the current network * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @id: EAP identifier for the packet * @len: Pointer to a variable that will be set to the length of the response * @encrypted: Whether the packet is for encrypted tunnel (EAP phase 2) * Returns: Pointer to the allocated EAP-Identity/Response packet or %NULL on * failure * * This function allocates and builds an EAP-Identity/Response packet for the * current network. The caller is responsible for freeing the returned data. */ u8 * eap_sm_buildIdentity(struct eap_sm *sm, int id, size_t *len, int encrypted) { struct wpa_ssid *config = eap_get_config(sm); struct eap_hdr *resp; u8 *pos; const u8 *identity; size_t identity_len; if (config == NULL) { wpa_printf(MSG_WARNING, "EAP: buildIdentity: configuration " "was not available"); return NULL; } if (sm->m && sm->m->get_identity && (identity = sm->m->get_identity(sm, sm->eap_method_priv, &identity_len)) != NULL) { wpa_hexdump_ascii(MSG_DEBUG, "EAP: using method re-auth " "identity", identity, identity_len); } else if (!encrypted && config->anonymous_identity) { identity = config->anonymous_identity; identity_len = config->anonymous_identity_len; wpa_hexdump_ascii(MSG_DEBUG, "EAP: using anonymous identity", identity, identity_len); } else { identity = config->identity; identity_len = config->identity_len; wpa_hexdump_ascii(MSG_DEBUG, "EAP: using real identity", identity, identity_len); } if (identity == NULL) { wpa_printf(MSG_WARNING, "EAP: buildIdentity: identity " "configuration was not available"); if (config->pcsc) { if (eap_sm_get_scard_identity(sm, config) < 0) return NULL; identity = config->identity; identity_len = config->identity_len; wpa_hexdump_ascii(MSG_DEBUG, "permanent identity from " "IMSI", identity, identity_len); } else { eap_sm_request_identity(sm, config); return NULL; } } *len = sizeof(struct eap_hdr) + 1 + identity_len; resp = malloc(*len); if (resp == NULL) return NULL; resp->code = EAP_CODE_RESPONSE; resp->identifier = id; resp->length = host_to_be16(*len); pos = (u8 *) (resp + 1); *pos++ = EAP_TYPE_IDENTITY; memcpy(pos, identity, identity_len); return (u8 *) resp; } static void eap_sm_processNotify(struct eap_sm *sm, const u8 *req, size_t len) { const struct eap_hdr *hdr = (const struct eap_hdr *) req; const u8 *pos; char *msg; size_t msg_len; int i; pos = (const u8 *) (hdr + 1); pos++; msg_len = be_to_host16(hdr->length); if (msg_len < 5) return; msg_len -= 5; wpa_hexdump_ascii(MSG_DEBUG, "EAP: EAP-Request Notification data", pos, msg_len); msg = malloc(msg_len + 1); if (msg == NULL) return; for (i = 0; i < msg_len; i++) msg[i] = isprint(pos[i]) ? (char) pos[i] : '_'; msg[msg_len] = '\0'; wpa_msg(sm->msg_ctx, MSG_INFO, "%s%s", WPA_EVENT_EAP_NOTIFICATION, msg); free(msg); } static u8 * eap_sm_buildNotify(struct eap_sm *sm, int id, size_t *len) { struct eap_hdr *resp; u8 *pos; wpa_printf(MSG_DEBUG, "EAP: Generating EAP-Response Notification"); *len = sizeof(struct eap_hdr) + 1; resp = malloc(*len); if (resp == NULL) return NULL; resp->code = EAP_CODE_RESPONSE; resp->identifier = id; resp->length = host_to_be16(*len); pos = (u8 *) (resp + 1); *pos = EAP_TYPE_NOTIFICATION; return (u8 *) resp; } static void eap_sm_parseEapReq(struct eap_sm *sm, const u8 *req, size_t len) { const struct eap_hdr *hdr; size_t plen; sm->rxReq = sm->rxResp = sm->rxSuccess = sm->rxFailure = FALSE; sm->reqId = 0; sm->reqMethod = EAP_TYPE_NONE; if (req == NULL || len < sizeof(*hdr)) return; hdr = (const struct eap_hdr *) req; plen = be_to_host16(hdr->length); if (plen > len) { wpa_printf(MSG_DEBUG, "EAP: Ignored truncated EAP-Packet " "(len=%lu plen=%lu)", (unsigned long) len, (unsigned long) plen); return; } sm->reqId = hdr->identifier; if (sm->workaround) { md5_vector(1, (const u8 **) &req, &len, sm->req_md5); } switch (hdr->code) { case EAP_CODE_REQUEST: sm->rxReq = TRUE; if (plen > sizeof(*hdr)) sm->reqMethod = *((u8 *) (hdr + 1)); wpa_printf(MSG_DEBUG, "EAP: Received EAP-Request method=%d " "id=%d", sm->reqMethod, sm->reqId); break; case EAP_CODE_RESPONSE: if (sm->selectedMethod == EAP_TYPE_LEAP) { /* * LEAP differs from RFC 4137 by using reversed roles * for mutual authentication and because of this, we * need to accept EAP-Response frames if LEAP is used. */ sm->rxResp = TRUE; if (plen > sizeof(*hdr)) sm->reqMethod = *((u8 *) (hdr + 1)); wpa_printf(MSG_DEBUG, "EAP: Received EAP-Response for " "LEAP method=%d id=%d", sm->reqMethod, sm->reqId); break; } wpa_printf(MSG_DEBUG, "EAP: Ignored EAP-Response"); break; case EAP_CODE_SUCCESS: wpa_printf(MSG_DEBUG, "EAP: Received EAP-Success"); sm->rxSuccess = TRUE; break; case EAP_CODE_FAILURE: wpa_printf(MSG_DEBUG, "EAP: Received EAP-Failure"); sm->rxFailure = TRUE; break; default: wpa_printf(MSG_DEBUG, "EAP: Ignored EAP-Packet with unknown " "code %d", hdr->code); break; } } /** * eap_sm_init - Allocate and initialize EAP state machine * @eapol_ctx: Context data to be used with eapol_cb calls * @eapol_cb: Pointer to EAPOL callback functions * @msg_ctx: Context data for wpa_msg() calls * @conf: EAP configuration * Returns: Pointer to the allocated EAP state machine or %NULL on failure * * This function allocates and initializes an EAP state machine. In addition, * this initializes TLS library for the new EAP state machine. eapol_cb pointer * will be in use until eap_sm_deinit() is used to deinitialize this EAP state * machine. Consequently, the caller must make sure that this data structure * remains alive while the EAP state machine is active. */ struct eap_sm * eap_sm_init(void *eapol_ctx, struct eapol_callbacks *eapol_cb, void *msg_ctx, struct eap_config *conf) { struct eap_sm *sm; struct tls_config tlsconf; sm = malloc(sizeof(*sm)); if (sm == NULL) return NULL; memset(sm, 0, sizeof(*sm)); sm->eapol_ctx = eapol_ctx; sm->eapol_cb = eapol_cb; sm->msg_ctx = msg_ctx; sm->ClientTimeout = 60; memset(&tlsconf, 0, sizeof(tlsconf)); tlsconf.opensc_engine_path = conf->opensc_engine_path; tlsconf.pkcs11_engine_path = conf->pkcs11_engine_path; tlsconf.pkcs11_module_path = conf->pkcs11_module_path; sm->ssl_ctx = tls_init(&tlsconf); if (sm->ssl_ctx == NULL) { wpa_printf(MSG_WARNING, "SSL: Failed to initialize TLS " "context."); free(sm); return NULL; } return sm; } /** * eap_sm_deinit - Deinitialize and free an EAP state machine * @sm: Pointer to EAP state machine allocated with eap_sm_init() * * This function deinitializes EAP state machine and frees all allocated * resources. */ void eap_sm_deinit(struct eap_sm *sm) { if (sm == NULL) return; eap_deinit_prev_method(sm, "EAP deinit"); eap_sm_abort(sm); tls_deinit(sm->ssl_ctx); free(sm); } /** * eap_sm_step - Step EAP state machine * @sm: Pointer to EAP state machine allocated with eap_sm_init() * Returns: 1 if EAP state was changed or 0 if not * * This function advances EAP state machine to a new state to match with the * current variables. This should be called whenever variables used by the EAP * state machine have changed. */ int eap_sm_step(struct eap_sm *sm) { int res = 0; do { sm->changed = FALSE; SM_STEP_RUN(EAP); if (sm->changed) res = 1; } while (sm->changed); return res; } /** * eap_sm_abort - Abort EAP authentication * @sm: Pointer to EAP state machine allocated with eap_sm_init() * * Release system resources that have been allocated for the authentication * session without fully deinitializing the EAP state machine. */ void eap_sm_abort(struct eap_sm *sm) { free(sm->lastRespData); sm->lastRespData = NULL; free(sm->eapRespData); sm->eapRespData = NULL; free(sm->eapKeyData); sm->eapKeyData = NULL; } static const char * eap_sm_state_txt(int state) { switch (state) { case EAP_INITIALIZE: return "INITIALIZE"; case EAP_DISABLED: return "DISABLED"; case EAP_IDLE: return "IDLE"; case EAP_RECEIVED: return "RECEIVED"; case EAP_GET_METHOD: return "GET_METHOD"; case EAP_METHOD: return "METHOD"; case EAP_SEND_RESPONSE: return "SEND_RESPONSE"; case EAP_DISCARD: return "DISCARD"; case EAP_IDENTITY: return "IDENTITY"; case EAP_NOTIFICATION: return "NOTIFICATION"; case EAP_RETRANSMIT: return "RETRANSMIT"; case EAP_SUCCESS: return "SUCCESS"; case EAP_FAILURE: return "FAILURE"; default: return "UNKNOWN"; } } static const char * eap_sm_method_state_txt(EapMethodState state) { switch (state) { case METHOD_NONE: return "NONE"; case METHOD_INIT: return "INIT"; case METHOD_CONT: return "CONT"; case METHOD_MAY_CONT: return "MAY_CONT"; case METHOD_DONE: return "DONE"; default: return "UNKNOWN"; } } static const char * eap_sm_decision_txt(EapDecision decision) { switch (decision) { case DECISION_FAIL: return "FAIL"; case DECISION_COND_SUCC: return "COND_SUCC"; case DECISION_UNCOND_SUCC: return "UNCOND_SUCC"; default: return "UNKNOWN"; } } /** * eap_sm_get_status - Get EAP state machine status * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @buf: Buffer for status information * @buflen: Maximum buffer length * @verbose: Whether to include verbose status information * Returns: Number of bytes written to buf. * * Query EAP state machine for status information. This function fills in a * text area with current status information from the EAPOL state machine. If * the buffer (buf) is not large enough, status information will be truncated * to fit the buffer. */ int eap_sm_get_status(struct eap_sm *sm, char *buf, size_t buflen, int verbose) { int len; if (sm == NULL) return 0; len = snprintf(buf, buflen, "EAP state=%s\n", eap_sm_state_txt(sm->EAP_state)); if (sm->selectedMethod != EAP_TYPE_NONE) { const char *name; if (sm->m) { name = sm->m->name; } else { const struct eap_method *m = eap_sm_get_eap_methods(sm->selectedMethod); if (m) name = m->name; else name = "?"; } len += snprintf(buf + len, buflen - len, "selectedMethod=%d (EAP-%s)\n", sm->selectedMethod, name); if (sm->m && sm->m->get_status) { len += sm->m->get_status(sm, sm->eap_method_priv, buf + len, buflen - len, verbose); } } if (verbose) { len += snprintf(buf + len, buflen - len, "reqMethod=%d\n" "methodState=%s\n" "decision=%s\n" "ClientTimeout=%d\n", sm->reqMethod, eap_sm_method_state_txt(sm->methodState), eap_sm_decision_txt(sm->decision), sm->ClientTimeout); } return len; } typedef enum { TYPE_IDENTITY, TYPE_PASSWORD, TYPE_OTP, TYPE_PIN, TYPE_NEW_PASSWORD, TYPE_PASSPHRASE } eap_ctrl_req_type; static void eap_sm_request(struct eap_sm *sm, struct wpa_ssid *config, eap_ctrl_req_type type, const char *msg, size_t msglen) { char *buf; size_t buflen; int len; char *field; char *txt, *tmp; if (config == NULL || sm == NULL) return; switch (type) { case TYPE_IDENTITY: field = "IDENTITY"; txt = "Identity"; config->pending_req_identity++; break; case TYPE_PASSWORD: field = "PASSWORD"; txt = "Password"; config->pending_req_password++; break; case TYPE_NEW_PASSWORD: field = "NEW_PASSWORD"; txt = "New Password"; config->pending_req_new_password++; break; case TYPE_PIN: field = "PIN"; txt = "PIN"; config->pending_req_pin++; break; case TYPE_OTP: field = "OTP"; if (msg) { tmp = malloc(msglen + 3); if (tmp == NULL) return; tmp[0] = '['; memcpy(tmp + 1, msg, msglen); tmp[msglen + 1] = ']'; tmp[msglen + 2] = '\0'; txt = tmp; free(config->pending_req_otp); config->pending_req_otp = tmp; config->pending_req_otp_len = msglen + 3; } else { if (config->pending_req_otp == NULL) return; txt = config->pending_req_otp; } break; case TYPE_PASSPHRASE: field = "PASSPHRASE"; txt = "Private key passphrase"; config->pending_req_passphrase++; break; default: return; } buflen = 100 + strlen(txt) + config->ssid_len; buf = malloc(buflen); if (buf == NULL) return; len = snprintf(buf, buflen, WPA_CTRL_REQ "%s-%d:%s needed for SSID ", field, config->id, txt); if (config->ssid && buflen > len + config->ssid_len) { memcpy(buf + len, config->ssid, config->ssid_len); len += config->ssid_len; buf[len] = '\0'; } wpa_msg(sm->msg_ctx, MSG_INFO, "%s", buf); free(buf); } /** * eap_sm_request_identity - Request identity from user (ctrl_iface) * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @config: Pointer to the current network configuration * * EAP methods can call this function to request identity information for the * current network. This is normally called when the identity is not included * in the network configuration. The request will be sent to monitor programs * through the control interface. */ void eap_sm_request_identity(struct eap_sm *sm, struct wpa_ssid *config) { eap_sm_request(sm, config, TYPE_IDENTITY, NULL, 0); } /** * eap_sm_request_password - Request password from user (ctrl_iface) * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @config: Pointer to the current network configuration * * EAP methods can call this function to request password information for the * current network. This is normally called when the password is not included * in the network configuration. The request will be sent to monitor programs * through the control interface. */ void eap_sm_request_password(struct eap_sm *sm, struct wpa_ssid *config) { eap_sm_request(sm, config, TYPE_PASSWORD, NULL, 0); } /** * eap_sm_request_new_password - Request new password from user (ctrl_iface) * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @config: Pointer to the current network configuration * * EAP methods can call this function to request new password information for * the current network. This is normally called when the EAP method indicates * that the current password has expired and password change is required. The * request will be sent to monitor programs through the control interface. */ void eap_sm_request_new_password(struct eap_sm *sm, struct wpa_ssid *config) { eap_sm_request(sm, config, TYPE_NEW_PASSWORD, NULL, 0); } /** * eap_sm_request_pin - Request SIM or smart card PIN from user (ctrl_iface) * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @config: Pointer to the current network configuration * * EAP methods can call this function to request SIM or smart card PIN * information for the current network. This is normally called when the PIN is * not included in the network configuration. The request will be sent to * monitor programs through the control interface. */ void eap_sm_request_pin(struct eap_sm *sm, struct wpa_ssid *config) { eap_sm_request(sm, config, TYPE_PIN, NULL, 0); } /** * eap_sm_request_otp - Request one time password from user (ctrl_iface) * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @config: Pointer to the current network configuration * @msg: Message to be displayed to the user when asking for OTP * @msg_len: Length of the user displayable message * * EAP methods can call this function to request open time password (OTP) for * the current network. The request will be sent to monitor programs through * the control interface. */ void eap_sm_request_otp(struct eap_sm *sm, struct wpa_ssid *config, const char *msg, size_t msg_len) { eap_sm_request(sm, config, TYPE_OTP, msg, msg_len); } /** * eap_sm_request_passphrase - Request passphrase from user (ctrl_iface) * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @config: Pointer to the current network configuration * * EAP methods can call this function to request passphrase for a private key * for the current network. This is normally called when the passphrase is not * included in the network configuration. The request will be sent to monitor * programs through the control interface. */ void eap_sm_request_passphrase(struct eap_sm *sm, struct wpa_ssid *config) { eap_sm_request(sm, config, TYPE_PASSPHRASE, NULL, 0); } /** * eap_sm_notify_ctrl_attached - Notification of attached monitor * @sm: Pointer to EAP state machine allocated with eap_sm_init() * * Notify EAP state machines that a monitor was attached to the control * interface to trigger re-sending of pending requests for user input. */ void eap_sm_notify_ctrl_attached(struct eap_sm *sm) { struct wpa_ssid *config = eap_get_config(sm); if (config == NULL) return; /* Re-send any pending requests for user data since a new control * interface was added. This handles cases where the EAP authentication * starts immediately after system startup when the user interface is * not yet running. */ if (config->pending_req_identity) eap_sm_request_identity(sm, config); if (config->pending_req_password) eap_sm_request_password(sm, config); if (config->pending_req_new_password) eap_sm_request_new_password(sm, config); if (config->pending_req_otp) eap_sm_request_otp(sm, config, NULL, 0); if (config->pending_req_pin) eap_sm_request_pin(sm, config); if (config->pending_req_passphrase) eap_sm_request_passphrase(sm, config); } /** * eap_get_type - Get EAP type for the given EAP method name * @name: EAP method name, e.g., TLS * Returns: EAP method type or %EAP_TYPE_NONE if not found * * This function maps EAP type names into EAP type numbers based on the list of * EAP methods included in the build. */ u8 eap_get_type(const char *name) { int i; for (i = 0; i < NUM_EAP_METHODS; i++) { if (strcmp(eap_methods[i]->name, name) == 0) return eap_methods[i]->method; } return EAP_TYPE_NONE; } /** * eap_get_name - Get EAP method name for the given EAP type * @type: EAP method type * Returns: EAP method name, e.g., TLS, or %NULL if not found * * This function maps EAP type numbers into EAP type names based on the list of * EAP methods included in the build. */ const char * eap_get_name(EapType type) { int i; for (i = 0; i < NUM_EAP_METHODS; i++) { if (eap_methods[i]->method == type) return eap_methods[i]->name; } return NULL; } /** * eap_get_names - Get space separated list of names for supported EAP methods * @buf: Buffer for names * @buflen: Buffer length * Returns: Number of characters written into buf (not including nul * termination) */ size_t eap_get_names(char *buf, size_t buflen) { char *pos, *end; int i; pos = buf; end = pos + buflen; for (i = 0; i < NUM_EAP_METHODS; i++) { pos += snprintf(pos, end - pos, "%s%s", i == 0 ? "" : " ", eap_methods[i]->name); } return pos - buf; } static int eap_allowed_phase2_type(int type) { return type != EAP_TYPE_PEAP && type != EAP_TYPE_TTLS && type != EAP_TYPE_FAST; } /** * eap_get_phase2_type - Get EAP type for the given EAP phase 2 method name * @name: EAP method name, e.g., MD5 * Returns: EAP method type or %EAP_TYPE_NONE if not found * * This function maps EAP type names into EAP type numbers that are allowed for * Phase 2, i.e., for tunneled authentication. Phase 2 is used, e.g., with * EAP-PEAP, EAP-TTLS, and EAP-FAST. */ u8 eap_get_phase2_type(const char *name) { u8 type = eap_get_type(name); if (eap_allowed_phase2_type(type)) return type; return EAP_TYPE_NONE; } /** * eap_get_phase2_types - Get list of allowed EAP phase 2 types * @config: Pointer to a network configuration * @count: Pointer to a variable to be filled with number of returned EAP types * Returns: Pointer to allocated type list or %NULL on failure * * This function generates an array of allowed EAP phase 2 (tunneled) types for * the given network configuration. */ u8 *eap_get_phase2_types(struct wpa_ssid *config, size_t *count) { u8 *buf, method; int i; *count = 0; buf = malloc(NUM_EAP_METHODS); if (buf == NULL) return NULL; for (i = 0; i < NUM_EAP_METHODS; i++) { method = eap_methods[i]->method; if (eap_allowed_phase2_type(method)) { if (method == EAP_TYPE_TLS && config && config->private_key2 == NULL) continue; buf[*count] = method; (*count)++; } } return buf; } /** * eap_set_fast_reauth - Update fast_reauth setting * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @enabled: 1 = Fast reauthentication is enabled, 0 = Disabled */ void eap_set_fast_reauth(struct eap_sm *sm, int enabled) { sm->fast_reauth = enabled; } /** * eap_set_workaround - Update EAP workarounds setting * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @workaround: 1 = Enable EAP workarounds, 0 = Disable EAP workarounds */ void eap_set_workaround(struct eap_sm *sm, unsigned int workaround) { sm->workaround = workaround; } /** * eap_get_config - Get current network configuration * @sm: Pointer to EAP state machine allocated with eap_sm_init() * Returns: Pointer to the current network configuration or %NULL if not found */ struct wpa_ssid * eap_get_config(struct eap_sm *sm) { return sm->eapol_cb->get_config(sm->eapol_ctx); } /** * eap_key_available - Get key availability (eapKeyAvailable variable) * @sm: Pointer to EAP state machine allocated with eap_sm_init() * Returns: 1 if EAP keying material is available, 0 if not */ int eap_key_available(struct eap_sm *sm) { return sm ? sm->eapKeyAvailable : 0; } /** * eap_notify_success - Notify EAP state machine about external success trigger * @sm: Pointer to EAP state machine allocated with eap_sm_init() * * This function is called when external event, e.g., successful completion of * WPA-PSK key handshake, is indicating that EAP state machine should move to * success state. This is mainly used with security modes that do not use EAP * state machine (e.g., WPA-PSK). */ void eap_notify_success(struct eap_sm *sm) { if (sm) { sm->decision = DECISION_COND_SUCC; sm->EAP_state = EAP_SUCCESS; } } /** * eap_notify_lower_layer_success - Notification of lower layer success * @sm: Pointer to EAP state machine allocated with eap_sm_init() * * Notify EAP state machines that a lower layer has detected a successful * authentication. This is used to recover from dropped EAP-Success messages. */ void eap_notify_lower_layer_success(struct eap_sm *sm) { if (sm == NULL) return; if (eapol_get_bool(sm, EAPOL_eapSuccess) || sm->decision == DECISION_FAIL || (sm->methodState != METHOD_MAY_CONT && sm->methodState != METHOD_DONE)) return; if (sm->eapKeyData != NULL) sm->eapKeyAvailable = TRUE; eapol_set_bool(sm, EAPOL_eapSuccess, TRUE); wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_SUCCESS "EAP authentication completed successfully (based on lower " "layer success)"); } /** * eap_get_eapKeyData - Get master session key (MSK) from EAP state machine * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @len: Pointer to variable that will be set to number of bytes in the key * Returns: Pointer to the EAP keying data or %NULL on failure * * Fetch EAP keying material (MSK, eapKeyData) from the EAP state machine. The * key is available only after a successful authentication. EAP state machine * continues to manage the key data and the caller must not change or free the * returned data. */ const u8 * eap_get_eapKeyData(struct eap_sm *sm, size_t *len) { if (sm == NULL || sm->eapKeyData == NULL) { *len = 0; return NULL; } *len = sm->eapKeyDataLen; return sm->eapKeyData; } /** * eap_get_eapKeyData - Get EAP response data * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @len: Pointer to variable that will be set to the length of the response * Returns: Pointer to the EAP response (eapRespData) or %NULL on failure * * Fetch EAP response (eapRespData) from the EAP state machine. This data is * available when EAP state machine has processed an incoming EAP request. The * EAP state machine does not maintain a reference to the response after this * function is called and the caller is responsible for freeing the data. */ u8 * eap_get_eapRespData(struct eap_sm *sm, size_t *len) { u8 *resp; if (sm == NULL || sm->eapRespData == NULL) { *len = 0; return NULL; } resp = sm->eapRespData; *len = sm->eapRespDataLen; sm->eapRespData = NULL; sm->eapRespDataLen = 0; return resp; } /** * eap_sm_register_scard_ctx - Notification of smart card context * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @ctx: Context data for smart card operations * * Notify EAP state machines of context data for smart card operations. This * context data will be used as a parameter for scard_*() functions. */ void eap_register_scard_ctx(struct eap_sm *sm, void *ctx) { if (sm) sm->scard_ctx = ctx; } /** * eap_hdr_validate - Validate EAP header * @eap_type: Expected EAP type number * @msg: EAP frame (starting with EAP header) * @msglen: Length of msg * @plen: Pointer to variable to contain the returned payload length * Returns: Pointer to EAP payload (after type field), or %NULL on failure * * This is a helper function for EAP method implementations. This is usually * called in the beginning of struct eap_method::process() function to verify * that the received EAP request packet has a valid header. */ const u8 * eap_hdr_validate(EapType eap_type, const u8 *msg, size_t msglen, size_t *plen) { const struct eap_hdr *hdr; const u8 *pos; size_t len; hdr = (const struct eap_hdr *) msg; pos = (const u8 *) (hdr + 1); if (msglen < sizeof(*hdr) + 1 || *pos != eap_type) { wpa_printf(MSG_INFO, "EAP: Invalid frame type"); return NULL; } len = be_to_host16(hdr->length); if (len < sizeof(*hdr) + 1 || len > msglen) { wpa_printf(MSG_INFO, "EAP: Invalid EAP length"); return NULL; } *plen = len - sizeof(*hdr) - 1; return pos + 1; } /** * eap_set_config_blob - Set or add a named configuration blob * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @blob: New value for the blob * * Adds a new configuration blob or replaces the current value of an existing * blob. */ void eap_set_config_blob(struct eap_sm *sm, struct wpa_config_blob *blob) { sm->eapol_cb->set_config_blob(sm->eapol_ctx, blob); } /** * eap_get_config_blob - Get a named configuration blob * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @name: Name of the blob * Returns: Pointer to blob data or %NULL if not found */ const struct wpa_config_blob * eap_get_config_blob(struct eap_sm *sm, const char *name) { return sm->eapol_cb->get_config_blob(sm->eapol_ctx, name); } /** * eap_set_force_disabled - Set force_disabled flag * @sm: Pointer to EAP state machine allocated with eap_sm_init() * @disabled: 1 = EAP disabled, 0 = EAP enabled * * This function is used to force EAP state machine to be disabled when it is * not in use (e.g., with WPA-PSK or plaintext connections). */ void eap_set_force_disabled(struct eap_sm *sm, int disabled) { sm->force_disabled = disabled; }