/*- * Copyright (c) 1983, 1992, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)mcount.c 8.1 (Berkeley) 6/4/93 * $FreeBSD: src/lib/libc/gmon/mcount.c,v 1.17 1999/12/29 05:04:13 peter Exp $ * $DragonFly: src/lib/libcr/gmon/Attic/mcount.c,v 1.3 2003/11/12 20:21:27 eirikn Exp $ */ #include #include #ifdef _KERNEL #include #include #include #include void bintr (void); void btrap (void); void eintr (void); void user (void); #endif /* * mcount is called on entry to each function compiled with the profiling * switch set. _mcount(), which is declared in a machine-dependent way * with _MCOUNT_DECL, does the actual work and is either inlined into a * C routine or called by an assembly stub. In any case, this magic is * taken care of by the MCOUNT definition in . * * _mcount updates data structures that represent traversals of the * program's call graph edges. frompc and selfpc are the return * address and function address that represents the given call graph edge. * * Note: the original BSD code used the same variable (frompcindex) for * both frompcindex and frompc. Any reasonable, modern compiler will * perform this optimization. */ _MCOUNT_DECL(frompc, selfpc) /* _mcount; may be static, inline, etc */ register uintfptr_t frompc, selfpc; { #ifdef GUPROF u_int delta; #endif register fptrdiff_t frompci; register u_short *frompcindex; register struct tostruct *top, *prevtop; register struct gmonparam *p; register long toindex; #ifdef _KERNEL MCOUNT_DECL(s) #endif p = &_gmonparam; #ifndef GUPROF /* XXX */ /* * check that we are profiling * and that we aren't recursively invoked. */ if (p->state != GMON_PROF_ON) return; #endif #ifdef _KERNEL MCOUNT_ENTER(s); #else p->state = GMON_PROF_BUSY; #endif frompci = frompc - p->lowpc; #ifdef _KERNEL /* * When we are called from an exception handler, frompci may be * for a user address. Convert such frompci's to the index of * user() to merge all user counts. */ if (frompci >= p->textsize) { if (frompci + p->lowpc >= (uintfptr_t)(VM_MAXUSER_ADDRESS + UPAGES * PAGE_SIZE)) goto done; frompci = (uintfptr_t)user - p->lowpc; if (frompci >= p->textsize) goto done; } #endif #ifdef GUPROF if (p->state != GMON_PROF_HIRES) goto skip_guprof_stuff; /* * Look at the clock and add the count of clock cycles since the * clock was last looked at to a counter for frompc. This * solidifies the count for the function containing frompc and * effectively starts another clock for the current function. * The count for the new clock will be solidified when another * function call is made or the function returns. * * We use the usual sampling counters since they can be located * efficiently. 4-byte counters are usually necessary. * * There are many complications for subtracting the profiling * overheads from the counts for normal functions and adding * them to the counts for mcount(), mexitcount() and cputime(). * We attempt to handle fractional cycles, but the overheads * are usually underestimated because they are calibrated for * a simpler than usual setup. */ delta = cputime() - p->mcount_overhead; p->cputime_overhead_resid += p->cputime_overhead_frac; p->mcount_overhead_resid += p->mcount_overhead_frac; if ((int)delta < 0) *p->mcount_count += delta + p->mcount_overhead - p->cputime_overhead; else if (delta != 0) { if (p->cputime_overhead_resid >= CALIB_SCALE) { p->cputime_overhead_resid -= CALIB_SCALE; ++*p->cputime_count; --delta; } if (delta != 0) { if (p->mcount_overhead_resid >= CALIB_SCALE) { p->mcount_overhead_resid -= CALIB_SCALE; ++*p->mcount_count; --delta; } KCOUNT(p, frompci) += delta; } *p->mcount_count += p->mcount_overhead_sub; } *p->cputime_count += p->cputime_overhead; skip_guprof_stuff: #endif /* GUPROF */ #ifdef _KERNEL /* * When we are called from an exception handler, frompc is faked * to be for where the exception occurred. We've just solidified * the count for there. Now convert frompci to the index of btrap() * for trap handlers and bintr() for interrupt handlers to make * exceptions appear in the call graph as calls from btrap() and * bintr() instead of calls from all over. */ if ((uintfptr_t)selfpc >= (uintfptr_t)btrap && (uintfptr_t)selfpc < (uintfptr_t)eintr) { if ((uintfptr_t)selfpc >= (uintfptr_t)bintr) frompci = (uintfptr_t)bintr - p->lowpc; else frompci = (uintfptr_t)btrap - p->lowpc; } #endif /* * check that frompc is a reasonable pc value. * for example: signal catchers get called from the stack, * not from text space. too bad. */ if (frompci >= p->textsize) goto done; frompcindex = &p->froms[frompci / (p->hashfraction * sizeof(*p->froms))]; toindex = *frompcindex; if (toindex == 0) { /* * first time traversing this arc */ toindex = ++p->tos[0].link; if (toindex >= p->tolimit) /* halt further profiling */ goto overflow; *frompcindex = toindex; top = &p->tos[toindex]; top->selfpc = selfpc; top->count = 1; top->link = 0; goto done; } top = &p->tos[toindex]; if (top->selfpc == selfpc) { /* * arc at front of chain; usual case. */ top->count++; goto done; } /* * have to go looking down chain for it. * top points to what we are looking at, * prevtop points to previous top. * we know it is not at the head of the chain. */ for (; /* goto done */; ) { if (top->link == 0) { /* * top is end of the chain and none of the chain * had top->selfpc == selfpc. * so we allocate a new tostruct * and link it to the head of the chain. */ toindex = ++p->tos[0].link; if (toindex >= p->tolimit) goto overflow; top = &p->tos[toindex]; top->selfpc = selfpc; top->count = 1; top->link = *frompcindex; *frompcindex = toindex; goto done; } /* * otherwise, check the next arc on the chain. */ prevtop = top; top = &p->tos[top->link]; if (top->selfpc == selfpc) { /* * there it is. * increment its count * move it to the head of the chain. */ top->count++; toindex = prevtop->link; prevtop->link = top->link; top->link = *frompcindex; *frompcindex = toindex; goto done; } } done: #ifdef _KERNEL MCOUNT_EXIT(s); #else p->state = GMON_PROF_ON; #endif return; overflow: p->state = GMON_PROF_ERROR; #ifdef _KERNEL MCOUNT_EXIT(s); #endif return; } /* * Actual definition of mcount function. Defined in , * which is included by . */ MCOUNT #ifdef GUPROF void mexitcount(selfpc) uintfptr_t selfpc; { struct gmonparam *p; uintfptr_t selfpcdiff; p = &_gmonparam; selfpcdiff = selfpc - (uintfptr_t)p->lowpc; if (selfpcdiff < p->textsize) { u_int delta; /* * Solidify the count for the current function. */ delta = cputime() - p->mexitcount_overhead; p->cputime_overhead_resid += p->cputime_overhead_frac; p->mexitcount_overhead_resid += p->mexitcount_overhead_frac; if ((int)delta < 0) *p->mexitcount_count += delta + p->mexitcount_overhead - p->cputime_overhead; else if (delta != 0) { if (p->cputime_overhead_resid >= CALIB_SCALE) { p->cputime_overhead_resid -= CALIB_SCALE; ++*p->cputime_count; --delta; } if (delta != 0) { if (p->mexitcount_overhead_resid >= CALIB_SCALE) { p->mexitcount_overhead_resid -= CALIB_SCALE; ++*p->mexitcount_count; --delta; } KCOUNT(p, selfpcdiff) += delta; } *p->mexitcount_count += p->mexitcount_overhead_sub; } *p->cputime_count += p->cputime_overhead; } } #endif /* GUPROF */