/*- * Copyright (c) 1996 Bruce D. Evans. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/i386/isa/prof_machdep.c,v 1.14.2.1 2000/08/03 00:09:30 ps Exp $ * $DragonFly: src/sys/i386/isa/Attic/prof_machdep.c,v 1.2 2003/06/17 04:28:37 dillon Exp $ */ #ifdef GUPROF #include "opt_i586_guprof.h" #include "opt_perfmon.h" #include #include #include #include #include #include #include #include #undef MCOUNT #endif #include #ifdef PC98 #include #else #include #endif #include #ifdef GUPROF #define CPUTIME_CLOCK_UNINITIALIZED 0 #define CPUTIME_CLOCK_I8254 1 #define CPUTIME_CLOCK_TSC 2 #define CPUTIME_CLOCK_I586_PMC 3 #define CPUTIME_CLOCK_I8254_SHIFT 7 int cputime_bias = 1; /* initialize for locality of reference */ static int cputime_clock = CPUTIME_CLOCK_UNINITIALIZED; #ifdef I586_PMC_GUPROF static u_int cputime_clock_pmc_conf = I586_PMC_GUPROF; static int cputime_clock_pmc_init; static struct gmonparam saved_gmp; #endif #endif /* GUPROF */ #ifdef __GNUC__ __asm(" \n\ GM_STATE = 0 \n\ GMON_PROF_OFF = 3 \n\ \n\ .text \n\ .p2align 4,0x90 \n\ .globl __mcount \n\ .type __mcount,@function \n\ __mcount: \n\ # \n\ # Check that we are profiling. Do it early for speed. \n\ # \n\ cmpl $GMON_PROF_OFF," __XSTRING(CNAME(_gmonparam)) "+GM_STATE \n\ je .mcount_exit \n\ # \n\ # __mcount is the same as [.]mcount except the caller \n\ # hasn't changed the stack except to call here, so the \n\ # caller's raddr is above our raddr. \n\ # \n\ movl 4(%esp),%edx \n\ jmp .got_frompc \n\ \n\ .p2align 4,0x90 \n\ .globl " __XSTRING(HIDENAME(mcount)) " \n\ " __XSTRING(HIDENAME(mcount)) ": \n\ cmpl $GMON_PROF_OFF," __XSTRING(CNAME(_gmonparam)) "+GM_STATE \n\ je .mcount_exit \n\ # \n\ # The caller's stack frame has already been built, so \n\ # %ebp is the caller's frame pointer. The caller's \n\ # raddr is in the caller's frame following the caller's \n\ # caller's frame pointer. \n\ # \n\ movl 4(%ebp),%edx \n\ .got_frompc: \n\ # \n\ # Our raddr is the caller's pc. \n\ # \n\ movl (%esp),%eax \n\ \n\ pushfl \n\ pushl %eax \n\ pushl %edx \n\ cli \n\ call " __XSTRING(CNAME(mcount)) " \n\ addl $8,%esp \n\ popfl \n\ .mcount_exit: \n\ ret \n\ "); #else /* !__GNUC__ */ #error #endif /* __GNUC__ */ #ifdef GUPROF /* * [.]mexitcount saves the return register(s), loads selfpc and calls * mexitcount(selfpc) to do the work. Someday it should be in a machine * dependent file together with cputime(), __mcount and [.]mcount. cputime() * can't just be put in machdep.c because it has to be compiled without -pg. */ #ifdef __GNUC__ __asm(" \n\ .text \n\ # \n\ # Dummy label to be seen when gprof -u hides [.]mexitcount. \n\ # \n\ .p2align 4,0x90 \n\ .globl __mexitcount \n\ .type __mexitcount,@function \n\ __mexitcount: \n\ nop \n\ \n\ GMON_PROF_HIRES = 4 \n\ \n\ .p2align 4,0x90 \n\ .globl " __XSTRING(HIDENAME(mexitcount)) " \n\ " __XSTRING(HIDENAME(mexitcount)) ": \n\ cmpl $GMON_PROF_HIRES," __XSTRING(CNAME(_gmonparam)) "+GM_STATE \n\ jne .mexitcount_exit \n\ pushl %edx \n\ pushl %eax \n\ movl 8(%esp),%eax \n\ pushfl \n\ pushl %eax \n\ cli \n\ call " __XSTRING(CNAME(mexitcount)) " \n\ addl $4,%esp \n\ popfl \n\ popl %eax \n\ popl %edx \n\ .mexitcount_exit: \n\ ret \n\ "); #else /* !__GNUC__ */ #error #endif /* __GNUC__ */ /* * Return the time elapsed since the last call. The units are machine- * dependent. */ int cputime() { u_int count; int delta; #if (defined(I586_CPU) || defined(I686_CPU)) && !defined(SMP) && \ defined(PERFMON) && defined(I586_PMC_GUPROF) u_quad_t event_count; #endif u_char high, low; static u_int prev_count; #if (defined(I586_CPU) || defined(I686_CPU)) && !defined(SMP) if (cputime_clock == CPUTIME_CLOCK_TSC) { count = (u_int)rdtsc(); delta = (int)(count - prev_count); prev_count = count; return (delta); } #if defined(PERFMON) && defined(I586_PMC_GUPROF) if (cputime_clock == CPUTIME_CLOCK_I586_PMC) { /* * XXX permon_read() should be inlined so that the * perfmon module doesn't need to be compiled with * profiling disabled and so that it is fast. */ perfmon_read(0, &event_count); count = (u_int)event_count; delta = (int)(count - prev_count); prev_count = count; return (delta); } #endif /* PERFMON && I586_PMC_GUPROF */ #endif /* (I586_CPU || I686_CPU) && !SMP */ /* * Read the current value of the 8254 timer counter 0. */ outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH); low = inb(TIMER_CNTR0); high = inb(TIMER_CNTR0); count = ((high << 8) | low) << CPUTIME_CLOCK_I8254_SHIFT; /* * The timer counts down from TIMER_CNTR0_MAX to 0 and then resets. * While profiling is enabled, this routine is called at least twice * per timer reset (for mcounting and mexitcounting hardclock()), * so at most one reset has occurred since the last call, and one * has occurred iff the current count is larger than the previous * count. This allows counter underflow to be detected faster * than in microtime(). */ delta = prev_count - count; prev_count = count; if ((int) delta <= 0) return (delta + (timer0_max_count << CPUTIME_CLOCK_I8254_SHIFT)); return (delta); } static int sysctl_machdep_cputime_clock(SYSCTL_HANDLER_ARGS) { int clock; int error; #if defined(PERFMON) && defined(I586_PMC_GUPROF) int event; struct pmc pmc; #endif clock = cputime_clock; #if defined(PERFMON) && defined(I586_PMC_GUPROF) if (clock == CPUTIME_CLOCK_I586_PMC) { pmc.pmc_val = cputime_clock_pmc_conf; clock += pmc.pmc_event; } #endif error = sysctl_handle_opaque(oidp, &clock, sizeof clock, req); if (error == 0 && req->newptr != NULL) { #if defined(PERFMON) && defined(I586_PMC_GUPROF) if (clock >= CPUTIME_CLOCK_I586_PMC) { event = clock - CPUTIME_CLOCK_I586_PMC; if (event >= 256) return (EINVAL); pmc.pmc_num = 0; pmc.pmc_event = event; pmc.pmc_unit = 0; pmc.pmc_flags = PMCF_E | PMCF_OS | PMCF_USR; pmc.pmc_mask = 0; cputime_clock_pmc_conf = pmc.pmc_val; cputime_clock = CPUTIME_CLOCK_I586_PMC; } else #endif { if (clock < 0 || clock >= CPUTIME_CLOCK_I586_PMC) return (EINVAL); cputime_clock = clock; } } return (error); } SYSCTL_PROC(_machdep, OID_AUTO, cputime_clock, CTLTYPE_INT | CTLFLAG_RW, 0, sizeof(u_int), sysctl_machdep_cputime_clock, "I", ""); /* * The start and stop routines need not be here since we turn off profiling * before calling them. They are here for convenience. */ void startguprof(gp) struct gmonparam *gp; { if (cputime_clock == CPUTIME_CLOCK_UNINITIALIZED) { cputime_clock = CPUTIME_CLOCK_I8254; #if (defined(I586_CPU) || defined(I686_CPU)) && !defined(SMP) if (tsc_freq != 0) cputime_clock = CPUTIME_CLOCK_TSC; #endif } gp->profrate = timer_freq << CPUTIME_CLOCK_I8254_SHIFT; #if (defined(I586_CPU) || defined(I686_CPU)) && !defined(SMP) if (cputime_clock == CPUTIME_CLOCK_TSC) gp->profrate = tsc_freq; #if defined(PERFMON) && defined(I586_PMC_GUPROF) else if (cputime_clock == CPUTIME_CLOCK_I586_PMC) { if (perfmon_avail() && perfmon_setup(0, cputime_clock_pmc_conf) == 0) { if (perfmon_start(0) != 0) perfmon_fini(0); else { /* XXX 1 event == 1 us. */ gp->profrate = 1000000; saved_gmp = *gp; /* Zap overheads. They are invalid. */ gp->cputime_overhead = 0; gp->mcount_overhead = 0; gp->mcount_post_overhead = 0; gp->mcount_pre_overhead = 0; gp->mexitcount_overhead = 0; gp->mexitcount_post_overhead = 0; gp->mexitcount_pre_overhead = 0; cputime_clock_pmc_init = TRUE; } } } #endif /* PERFMON && I586_PMC_GUPROF */ #endif /* (I586_CPU || I686_CPU) && !SMP */ cputime_bias = 0; cputime(); } void stopguprof(gp) struct gmonparam *gp; { #if defined(PERFMON) && defined(I586_PMC_GUPROF) if (cputime_clock_pmc_init) { *gp = saved_gmp; perfmon_fini(0); cputime_clock_pmc_init = FALSE; } #endif } #else /* !GUPROF */ #ifdef __GNUC__ __asm(" \n\ .text \n\ .p2align 4,0x90 \n\ .globl " __XSTRING(HIDENAME(mexitcount)) " \n\ " __XSTRING(HIDENAME(mexitcount)) ": \n\ ret \n\ "); #else /* !__GNUC__ */ #error #endif /* __GNUC__ */ #endif /* GUPROF */