/* * Device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010 * PCI-SCSI controllers. * * Copyright (C) 1999-2001 Gerard Roudier * * This driver also supports the following Symbios/LSI PCI-SCSI chips: * 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895, * 53C810, 53C815, 53C825 and the 53C1510D is 53C8XX mode. * * * This driver for FreeBSD-CAM is derived from the Linux sym53c8xx driver. * Copyright (C) 1998-1999 Gerard Roudier * * The sym53c8xx driver is derived from the ncr53c8xx driver that had been * a port of the FreeBSD ncr driver to Linux-1.2.13. * * The original ncr driver has been written for 386bsd and FreeBSD by * Wolfgang Stanglmeier * Stefan Esser * Copyright (C) 1994 Wolfgang Stanglmeier * * The initialisation code, and part of the code that addresses * FreeBSD-CAM services is based on the aic7xxx driver for FreeBSD-CAM * written by Justin T. Gibbs. * * Other major contributions: * * NVRAM detection and reading. * Copyright (C) 1997 Richard Waltham * *----------------------------------------------------------------------------- * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* $FreeBSD: src/sys/dev/sym/sym_fw.h,v 1.1.2.2 2001/11/11 17:58:53 groudier Exp $ */ /* $DragonFly: src/sys/dev/disk/sym/sym_fw.h,v 1.2 2003/06/17 04:28:31 dillon Exp $ */ #ifndef SYM_FW_H #define SYM_FW_H /* * Macro used to generate interfaces for script A. */ #define SYM_GEN_FW_A(s) \ SYM_GEN_A(s, start) SYM_GEN_A(s, getjob_begin) \ SYM_GEN_A(s, getjob_end) \ SYM_GEN_A(s, select) SYM_GEN_A(s, wf_sel_done) \ SYM_GEN_A(s, send_ident) \ SYM_GEN_A(s, dispatch) SYM_GEN_A(s, init) \ SYM_GEN_A(s, clrack) SYM_GEN_A(s, complete_error) \ SYM_GEN_A(s, done) SYM_GEN_A(s, done_end) \ SYM_GEN_A(s, idle) SYM_GEN_A(s, ungetjob) \ SYM_GEN_A(s, reselect) \ SYM_GEN_A(s, resel_tag) SYM_GEN_A(s, resel_dsa) \ SYM_GEN_A(s, resel_no_tag) \ SYM_GEN_A(s, data_in) SYM_GEN_A(s, data_in2) \ SYM_GEN_A(s, data_out) SYM_GEN_A(s, data_out2) \ SYM_GEN_A(s, pm0_data) SYM_GEN_A(s, pm1_data) /* * Macro used to generate interfaces for script B. */ #define SYM_GEN_FW_B(s) \ SYM_GEN_B(s, no_data) \ SYM_GEN_B(s, sel_for_abort) SYM_GEN_B(s, sel_for_abort_1) \ SYM_GEN_B(s, msg_bad) SYM_GEN_B(s, msg_weird) \ SYM_GEN_B(s, wdtr_resp) SYM_GEN_B(s, send_wdtr) \ SYM_GEN_B(s, sdtr_resp) SYM_GEN_B(s, send_sdtr) \ SYM_GEN_B(s, ppr_resp) SYM_GEN_B(s, send_ppr) \ SYM_GEN_B(s, nego_bad_phase) \ SYM_GEN_B(s, ident_break) SYM_GEN_B(s, ident_break_atn) \ SYM_GEN_B(s, sdata_in) SYM_GEN_B(s, resel_bad_lun) \ SYM_GEN_B(s, bad_i_t_l) SYM_GEN_B(s, bad_i_t_l_q) \ SYM_GEN_B(s, wsr_ma_helper) \ SYM_GEN_B(s, snooptest) SYM_GEN_B(s, snoopend) /* * Generates structure interface that contains * offsets within script A and script B. */ #define SYM_GEN_A(s, label) s label; #define SYM_GEN_B(s, label) s label; struct sym_fwa_ofs { SYM_GEN_FW_A(u_short) }; struct sym_fwb_ofs { SYM_GEN_FW_B(u_short) SYM_GEN_B(u_short, start64); SYM_GEN_B(u_short, pm_handle); }; /* * Generates structure interface that contains * bus addresses within script A and script B. */ struct sym_fwa_ba { SYM_GEN_FW_A(u32) }; struct sym_fwb_ba { SYM_GEN_FW_B(u32) SYM_GEN_B(u32, start64); SYM_GEN_B(u32, pm_handle); }; #undef SYM_GEN_A #undef SYM_GEN_B /* * Let cc know about the name of the controller data structure. * We need this for function prototype declarations just below. */ struct sym_hcb; /* * Generic structure that defines a firmware. */ struct sym_fw { char *name; /* Name we want to print out */ u32 *a_base; /* Pointer to script A template */ int a_size; /* Size of script A */ struct sym_fwa_ofs *a_ofs; /* Useful offsets in script A */ u32 *b_base; /* Pointer to script B template */ int b_size; /* Size of script B */ struct sym_fwb_ofs *b_ofs; /* Useful offsets in script B */ /* Setup and patch methods for this firmware */ void (*setup)(struct sym_hcb *, struct sym_fw *); void (*patch)(struct sym_hcb *); }; /* * Macro used to declare a firmware. */ #define SYM_FW_ENTRY(fw, name) \ { \ name, \ (u32 *) &fw##a_scr, sizeof(fw##a_scr), &fw##a_ofs, \ (u32 *) &fw##b_scr, sizeof(fw##b_scr), &fw##b_ofs, \ fw##_setup, fw##_patch \ } /* * Macros used from the C code to get useful * SCRIPTS bus addresses. */ #define SCRIPTA_BA(np, label) (np->fwa_bas.label) #define SCRIPTB_BA(np, label) (np->fwb_bas.label) #define SCRIPTB0_BA(np,label) \ (np->scriptb0_ba + (np->fwb_bas.label - np->scriptb_ba)) /* * Macros used by scripts definitions. * * HADDR_1 generates a reference to a field of the controller data. * HADDR_2 generates a reference to a field of the controller data * with offset. * RADDR_1 generates a reference to a script processor register. * RADDR_2 generates a reference to a script processor register * with offset. * PADDR_A generates a reference to another part of script A. * PADDR_B generates a reference to another part of script B. * * SYM_GEN_PADDR_A and SYM_GEN_PADDR_B are used to define respectively * the PADDR_A and PADDR_B macros for each firmware by setting argument * `s' to the name of the corresponding structure. * * SCR_DATA_ZERO is used to allocate a DWORD of data in scripts areas. */ #define RELOC_SOFTC 0x40000000 #define RELOC_LABEL_A 0x50000000 #define RELOC_REGISTER 0x60000000 #define RELOC_LABEL_B 0x80000000 #define RELOC_MASK 0xf0000000 #define HADDR_1(label) (RELOC_SOFTC | offsetof(struct sym_hcb, label)) #define HADDR_2(label,ofs) (RELOC_SOFTC | \ (offsetof(struct sym_hcb, label)+(ofs))) #define RADDR_1(label) (RELOC_REGISTER | REG(label)) #define RADDR_2(label,ofs) (RELOC_REGISTER | ((REG(label))+(ofs))) #define SYM_GEN_PADDR_A(s, label) (RELOC_LABEL_A | offsetof(s, label)) #define SYM_GEN_PADDR_B(s, label) (RELOC_LABEL_B | offsetof(s, label)) #define SCR_DATA_ZERO 0xf00ff00f #endif /* SYM_FW_H */