# # $FreeBSD: src/etc/modems,v 1.4 1999/08/27 23:23:42 peter Exp $ # $DragonFly: src/etc/modems,v 1.2 2003/06/17 04:24:45 dillon Exp $ # @(#)modems 3/24/95 # # modems -- modem configuration data base file # see tip(1), modems(5) # # dial_command AT command to dial up remote # echo_off_command AT command to turn off command echo # escape_guard_time Shroud escape sequence with specified delay (ms) # escape_sequence Return to command escape sequence # hangup_command AT command to hangup modem # hw_flow_control Enable RTS/CTS flow control between DTE/DCE # intercharacter_delay Delay between characters sent to modem when issuing # commands # intercommand_delay Minimum delay between commands to modem # init_string AT command to initialize modem before dialing out # lock_baud Use fixed DTE / DCE bit rate # reset_delay Delay required by modem for reset # sportster|st|US Robotics Sportster 14.4K:dial_command=ATDT%s\r:hangup_command=ATH\r:\ :echo_off_command=ATE0\r:reset_command=AT&F1\r:\ :init_string=AT&B1&H1&R2&C1&D2\r:\ :escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\ :intercommand_delay#250:escape_guard_time#500:reset_delay#2000: mt932|multitech|mt|Multitech 932:dial_command=ATDT%s\r:hangup_command=ATH\r:\ :echo_off_command=ATE0\r:reset_command=ATZ\r:\ :init_string=AT$BA0$SB38400&E1&E4&E13&E15Q0V1X4E0S0=0\r:\ :escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\ :intercommand_delay#250:escape_guard_time#500:reset_delay#2000: generic|Generic AT command modem (use defaults):