# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ # # NOTE: Please would any committer updating this file also update the # make.conf(5) manual page, if necessary, which is located in # src/share/man/man5/make.conf.5. # # This file, if present, will be read by make (see /usr/share/mk/sys.mk). # It allows you to override macro definitions to make without changing # your source tree, or anything the source tree installs. # # This file must be in valid Makefile syntax. # # You have to find the things you can put here in the Makefiles and # documentation of the source tree. # # The CPUTYPE variable controls which processor should be targeted for # generated code. This controls processor-specific optimizations in # certain code (currently only OpenSSL) as well as modifying the value # of CFLAGS to contain the appropriate optimization directive to gcc. # The automatic setting of CFLAGS may be overridden using the # NO_CPU_CFLAGS variable below. # Currently the following CPU types are recognized: # Intel x86 architecture: # (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5 # (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486 # # If you experience any problems after setting this flag, please unset # it again before submitting a bug report or attempting to modify code. # It may be that certain types of software will become unstable after being # compiled with processor-specific (or higher - see below) optimization flags. # If in doubt, do not set CPUTYPE or CFLAGS to non-default values. # #CPUTYPE=i686 #NO_CPU_CFLAGS= true # Don't add -march= to CFLAGS automatically #NO_CPU_COPTFLAGS=true # Don't add -march= to COPTFLAGS automatically # # The CCVER variable controls which GCC-version to use by default. It # should be set using ?= so as not to interfere with CCVER overrides from # userland or the buildworld. Note that building world or the kernel using # an experimental compiler might be broken at any time. We currently # recommend that an override NOT be set in /etc/make.conf. # #CCVER?=gcc80 # (use GCC 8, default) # # CFLAGS controls the compiler settings used when compiling C code. # Note that optimization settings above -O (-O2, ...) are not recommended # or supported for compiling the world or the kernel - please revert any # nonstandard optimization settings to "-O" before submitting bug reports # to the developers. # #CFLAGS= -O -pipe # # CXXFLAGS controls the compiler settings used when compiling C++ code. # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" # alone will remove the often needed contents of CFLAGS from CXXFLAGS. # #CXXFLAGS+= -fmemoize-lookups -fsave-memoized # # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested # for use in developing FreeBSD and testing changes. They can be used by # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not # included here due to compiler bugs, e.g., mkdir()'s mode_t argument. # BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ -Wcast-qual -Wchar-subscripts -Winline \ -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings # # To compile just the kernel with special optimizations, you should use # this instead of CFLAGS (which is not applicable to kernel builds anyway). # There is very little to gain by using higher optimization levels, and doing # so can cause problems. # #COPTFLAGS= -O -pipe # # WORLD_CCOPTLEVEL used as a helper to compile world with higher optimizations # than -O, in sys.mk it is internally set into CFLAGS as -O${WORLD_CCOPTLEVEL} # so user needs to account for it when overriding CFLAGS from make.conf. # Available settings are: 0, 1, 2, 3, s, g, fast. WORLD_CCOPTLEVEL?= # # WORLD_CFLAGS is another helper for compiling DPorts (explicitly set as empty). # It is recommended to add extra compiler settings to it rather then to CFLAGS # directly. As WORLD_CCOPTLEVEL the WORLD_CFLAGS are added internally in sys.mk. WORLD_CFLAGS?= # # Strip the file before installing. Setting this to nothing will keep # the debugging symbols in the installed files. #STRIP= -s # # Compare before install #INSTALL=install -C # # Inhibit the automatic backup during installworld #NO_BACKUP= true # # To build ppp with normal permissions #PPP_NOSUID= true # # To enable installing ssh(1) with the setuid bit turned on #ENABLE_SUID_SSH= true # # Default thread library (c_r or thread_xu) THREAD_LIB?= thread_xu # # To enable Hesiod support in libc #WANT_HESIOD= true # # To disable name caching in the nsswitch subsystem. The generic caching # daemon, nscd(8), will not be built either if this option is set. #NO_NS_CACHING= true # # To avoid building various parts of the base system: #NO_ALTBINUTILS=true # do not build the alternative set of binutils #NO_ALTCOMPILER=true # do not build GCC 4.7 and other alt compilers #NO_CVS= true # do not build CVS #NO_GAMES= true # do not enter the games subdirectory #NO_GDB= true # do not build GDB #NO_INITRD= true # do not build initrd #NO_LPR= true # do not build lpr and related programs #NO_MODULES= true # do not build modules with the kernel #NO_SHARE= true # do not enter the share subdirectory #NOMAN= true # do not build manual pages #NOMANCOMPRESS= true # do not compress man pages #NOPROFILE= true # Avoid compiling profiled libraries # # To build sys/modules when building the world (our old way of doing things) #MODULES_WITH_WORLD=true # do not build modules when building kernel # # The list of modules to build instead of all of them. #MODULES_OVERRIDE= net/ipfw # # By default, the system will always use the keyboard/video card as system # console. However, the boot blocks may be dynamically configured to use a # serial port in addition to or instead of the keyboard/video console. # # By default we use COM1 as our serial console port *if* we're going to use # a serial port as our console at all. Alter as necessary. # # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 # #BOOT_COMCONSOLE_PORT= 0x3F8 # # The default serial console speed is 115200. # #BOOT_COMCONSOLE_SPEED= 115200 # # To build the installer as part of buildworld. #WANT_INSTALLER=yes # # OpenSSH: path to xauth program # #XAUTH_PATH=/usr/local/bin/xauth # # The list of locale modules to be compiled-in in the static # libc.a (and profile/libc.a). #STATIC_LOCALES=BIG5 EUC EUCTW ISO2022 MSKanji UTF8 STATIC_LOCALES=UTF8 # sendmail # # The following sets the default m4 configuration file to use at # install time. Use with caution as a make install will overwrite # any existing /etc/mail/sendmail.cf. The value should be a fully # qualified path name. Avoid using a value of /etc/mail/sendmail.mc # as a buildworld will create /etc/mail/sendmail.cf before # installworld installs an updated sendmail binary. # #SENDMAIL_MC=/etc/mail/myconfig.mc # # The following sets the default m4 configuration file for mail # submission to use at install time. Use with caution as a make # install will overwrite any existing /etc/mail/submit.cf. The # value should be a fully qualified path name. Avoid using a value # of /etc/mail/submit.mc as a buildworld will create /etc/mail/submit.cf # before installworld installs an updated sendmail binary. # #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc # # Setting the following variable modifies the flags passed to m4 when # building a .cf file from a .mc file. It can be used to enable # features disabled by default. # #SENDMAIL_M4_FLAGS= # # The permissions to use on alias and map databases generated using # /etc/mail/Makefile. # #SENDMAIL_MAP_PERMS= 640 # # The sendmail.cf and sendmail.submit.cf files are generated from many # m4 files that come from the installed sendmail. Sendmail is now # installed from DPorts together with these m4 files. # #SENDMAIL_CF_DIR= /usr/local/share/sendmail/cf