/*- * Copyright (c) 1992, 1993 Erik Forsberg. * Copyright (c) 1996, 1997 Kazutaka YOKOTA. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Ported to 386bsd Oct 17, 1992 * Sandi Donno, Computer Science, University of Cape Town, South Africa * Please send bug reports to sandi@cs.uct.ac.za * * Thanks are also due to Rick Macklem, rick@snowhite.cis.uoguelph.ca - * although I was only partially successful in getting the alpha release * of his "driver for the Logitech and ATI Inport Bus mice for use with * 386bsd and the X386 port" to work with my Microsoft mouse, I nevertheless * found his code to be an invaluable reference when porting this driver * to 386bsd. * * Further modifications for latest 386BSD+patchkit and port to NetBSD, * Andrew Herbert - 8 June 1993 * * Cloned from the Microsoft Bus Mouse driver, also by Erik Forsberg, by * Andrew Herbert - 12 June 1993 * * Modified for PS/2 mouse by Charles Hannum * - 13 June 1993 * * Modified for PS/2 AUX mouse by Shoji Yuen * - 24 October 1993 * * Hardware access routines and probe logic rewritten by * Kazutaka Yokota * - 3, 14, 22 October 1996. * - 12 November 1996. IOCTLs and rearranging `psmread', `psmioctl'... * - 14, 30 November 1996. Uses `kbdio.c'. * - 13 December 1996. Uses queuing version of `kbdio.c'. * - January/February 1997. Tweaked probe logic for * HiNote UltraII/Latitude/Armada laptops. * - 30 July 1997. Added APM support. * - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX). * Improved sync check logic. * Vendor specific support routines. * * $FreeBSD: src/sys/dev/atkbdc/psm.c,v 1.107 2010/09/09 07:52:15 ed Exp $ * $FreeBSD: stable/11/sys/dev/atkbdc/psm.c 307576 2016-10-18 20:17:57Z gonzo $ */ #include "opt_psm.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Driver specific options: the following options may be set by * `options' statements in the kernel configuration file. */ /* debugging */ #ifndef PSM_DEBUG #define PSM_DEBUG 0 /* * logging: 0: none, 1: brief, 2: verbose * 3: sync errors, 4: all packets */ #endif #define VLOG(level, args) do { \ if (verbose >= level) \ log args; \ } while (0) #ifndef PSM_INPUT_TIMEOUT #define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */ #endif #ifndef PSM_TAP_TIMEOUT #define PSM_TAP_TIMEOUT 125000 #endif #ifndef PSM_TAP_THRESHOLD #define PSM_TAP_THRESHOLD 25 #endif /* end of driver specific options */ #define PSM_DRIVER_NAME "psm" #define PSMCPNP_DRIVER_NAME "psmcpnp" /* input queue */ #define PSM_BUFSIZE 960 #define PSM_SMALLBUFSIZE 240 /* operation levels */ #define PSM_LEVEL_BASE 0 #define PSM_LEVEL_STANDARD 1 #define PSM_LEVEL_MIN PSM_LEVEL_BASE #define PSM_LEVEL_MAX PSM_LEVEL_STANDARD /* Logitech PS2++ protocol */ #define MOUSE_PS2PLUS_CHECKBITS(b) \ ((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f)) #define MOUSE_PS2PLUS_PACKET_TYPE(b) \ (((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4)) /* ring buffer */ typedef struct ringbuf { int count; /* # of valid elements in the buffer */ int head; /* head pointer */ int tail; /* tail poiner */ u_char buf[PSM_BUFSIZE]; } ringbuf_t; /* data buffer */ typedef struct packetbuf { u_char ipacket[16]; /* interim input buffer */ int inputbytes; /* # of bytes in the input buffer */ } packetbuf_t; #ifndef PSM_PACKETQUEUE #define PSM_PACKETQUEUE 128 #endif typedef struct synapticsinfo { struct sysctl_oid *sysctl_tree; struct sysctl_ctx_list sysctl_ctx; int directional_scrolls; int two_finger_scroll; int min_pressure; int max_pressure; int max_width; int margin_top; int margin_right; int margin_bottom; int margin_left; int na_top; int na_right; int na_bottom; int na_left; int window_min; int window_max; int multiplicator; int weight_current; int weight_previous; int weight_previous_na; int weight_len_squared; int div_min; int div_max; int div_max_na; int div_len; int tap_max_delta; int tap_min_queue; int taphold_timeout; int vscroll_ver_area; int vscroll_hor_area; int vscroll_min_delta; int vscroll_div_min; int vscroll_div_max; int touchpad_off; int softbuttons_y; int softbutton2_x; int softbutton3_x; int max_x; int max_y; } synapticsinfo_t; typedef struct synapticspacket { int x; int y; } synapticspacket_t; #define SYNAPTICS_PACKETQUEUE 10 #define SYNAPTICS_QUEUE_CURSOR(x) \ (x + SYNAPTICS_PACKETQUEUE) % SYNAPTICS_PACKETQUEUE #define SYNAPTICS_VERSION_GE(synhw, major, minor) \ ((synhw).infoMajor > (major) || \ ((synhw).infoMajor == (major) && (synhw).infoMinor >= (minor))) typedef struct smoother { synapticspacket_t queue[SYNAPTICS_PACKETQUEUE]; int queue_len; int queue_cursor; int start_x; int start_y; int avg_dx; int avg_dy; int squelch_x; int squelch_y; int is_fuzzy; int active; } smoother_t; typedef struct gesture { int window_min; int fingers_nb; int tap_button; int in_taphold; int in_vscroll; int zmax; /* maximum pressure value */ struct timeval taptimeout; /* tap timeout for touchpads */ } gesture_t; enum { TRACKPOINT_SYSCTL_SENSITIVITY, TRACKPOINT_SYSCTL_NEGATIVE_INERTIA, TRACKPOINT_SYSCTL_UPPER_PLATEAU, TRACKPOINT_SYSCTL_BACKUP_RANGE, TRACKPOINT_SYSCTL_DRAG_HYSTERESIS, TRACKPOINT_SYSCTL_MINIMUM_DRAG, TRACKPOINT_SYSCTL_UP_THRESHOLD, TRACKPOINT_SYSCTL_THRESHOLD, TRACKPOINT_SYSCTL_JENKS_CURVATURE, TRACKPOINT_SYSCTL_Z_TIME, TRACKPOINT_SYSCTL_PRESS_TO_SELECT, TRACKPOINT_SYSCTL_SKIP_BACKUPS }; typedef struct trackpointinfo { struct sysctl_ctx_list sysctl_ctx; struct sysctl_oid *sysctl_tree; int sensitivity; int inertia; int uplateau; int reach; int draghys; int mindrag; int upthresh; int threshold; int jenks; int ztime; int pts; int skipback; } trackpointinfo_t; typedef struct finger { int x; int y; int p; int w; int flags; } finger_t; #define PSM_FINGERS 2 /* # of processed fingers */ #define PSM_FINGER_IS_PEN (1<<0) #define PSM_FINGER_FUZZY (1<<1) #define PSM_FINGER_DEFAULT_P tap_threshold #define PSM_FINGER_DEFAULT_W 1 #define PSM_FINGER_IS_SET(f) ((f).x != -1 && (f).y != -1 && (f).p != 0) #define PSM_FINGER_RESET(f) do { \ (f) = (finger_t) { .x = -1, .y = -1, .p = 0, .w = 0, .flags = 0 }; \ } while (0) typedef struct elantechhw { int hwversion; int fwversion; int sizex; int sizey; int dpmmx; int dpmmy; int ntracesx; int ntracesy; int issemimt; int isclickpad; int hascrc; int hastrackpoint; int haspressure; } elantechhw_t; /* minimum versions supported by this driver */ #define ELANTECH_HW_IS_V1(fwver) ((fwver) < 0x020030 || (fwver) == 0x020600) #define ELANTECH_MAGIC(magic) \ ((magic)[0] == 0x3c && (magic)[1] == 0x03 && \ ((magic)[2] == 0xc8 || (magic)[2] == 0x00)) #define ELANTECH_FW_ID 0x00 #define ELANTECH_FW_VERSION 0x01 #define ELANTECH_CAPABILITIES 0x02 #define ELANTECH_SAMPLE 0x03 #define ELANTECH_RESOLUTION 0x04 #define ELANTECH_REG_READ 0x10 #define ELANTECH_REG_WRITE 0x11 #define ELANTECH_REG_RDWR 0x00 #define ELANTECH_CUSTOM_CMD 0xf8 #define ELANTECH_MAX_FINGERS PSM_FINGERS #define ELANTECH_FINGER_SET_XYP(pb) (finger_t) { \ .x = (((pb)->ipacket[1] & 0x0f) << 8) | (pb)->ipacket[2], \ .y = (((pb)->ipacket[4] & 0x0f) << 8) | (pb)->ipacket[5], \ .p = ((pb)->ipacket[1] & 0xf0) | (((pb)->ipacket[4] >> 4) & 0x0f), \ .w = PSM_FINGER_DEFAULT_W, \ .flags = 0 \ } enum { ELANTECH_PKT_NOP, ELANTECH_PKT_TRACKPOINT, ELANTECH_PKT_V2_COMMON, ELANTECH_PKT_V2_2FINGER, ELANTECH_PKT_V3, ELANTECH_PKT_V4_STATUS, ELANTECH_PKT_V4_HEAD, ELANTECH_PKT_V4_MOTION }; #define ELANTECH_PKT_IS_TRACKPOINT(pb) (((pb)->ipacket[3] & 0x0f) == 0x06) #define ELANTECH_PKT_IS_DEBOUNCE(pb, hwversion) ((hwversion) == 4 ? 0 : \ (pb)->ipacket[0] == ((hwversion) == 2 ? 0x84 : 0xc4) && \ (pb)->ipacket[1] == 0xff && (pb)->ipacket[2] == 0xff && \ (pb)->ipacket[3] == 0x02 && (pb)->ipacket[4] == 0xff && \ (pb)->ipacket[5] == 0xff) #define ELANTECH_PKT_IS_V2(pb) \ (((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0x0f) == 0x02) #define ELANTECH_PKT_IS_V3_HEAD(pb, hascrc) ((hascrc) ? \ ((pb)->ipacket[3] & 0x09) == 0x08 : \ ((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0xcf) == 0x02) #define ELANTECH_PKT_IS_V3_TAIL(pb, hascrc) ((hascrc) ? \ ((pb)->ipacket[3] & 0x09) == 0x09 : \ ((pb)->ipacket[0] & 0x0c) == 0x0c && ((pb)->ipacket[3] & 0xce) == 0x0c) #define ELANTECH_PKT_IS_V4(pb, hascrc) ((hascrc) ? \ ((pb)->ipacket[3] & 0x08) == 0x00 : \ ((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0x1c) == 0x10) typedef struct elantechaction { finger_t fingers[ELANTECH_MAX_FINGERS]; int mask; } elantechaction_t; /* driver control block */ struct psm_softc { /* Driver status information */ int unit; struct kqinfo rkq; /* Processes with registered kevents */ struct lock lock; /* Control lock */ u_char state; /* Mouse driver state */ int config; /* driver configuration flags */ int flags; /* other flags */ KBDC kbdc; /* handle to access kbd controller */ struct resource *intr; /* IRQ resource */ void *ih; /* interrupt handle */ mousehw_t hw; /* hardware information */ synapticshw_t synhw; /* Synaptics hardware information */ synapticsinfo_t syninfo; /* Synaptics configuration */ smoother_t smoother[PSM_FINGERS]; /* Motion smoothing */ gesture_t gesture; /* Gesture context */ elantechhw_t elanhw; /* Elantech hardware information */ elantechaction_t elanaction; /* Elantech action context */ int tphw; /* TrackPoint hardware information */ trackpointinfo_t tpinfo; /* TrackPoint configuration */ mousemode_t mode; /* operation mode */ mousemode_t dflt_mode; /* default operation mode */ mousestatus_t status; /* accumulated mouse movement */ ringbuf_t queue; /* mouse status queue */ packetbuf_t pqueue[PSM_PACKETQUEUE]; /* mouse data queue */ int pqueue_start; /* start of data in queue */ int pqueue_end; /* end of data in queue */ int button; /* the latest button state */ int xold; /* previous absolute X position */ int yold; /* previous absolute Y position */ int xaverage; /* average X position */ int yaverage; /* average Y position */ int squelch; /* level to filter movement at low speed */ int syncerrors; /* # of bytes discarded to synchronize */ int pkterrors; /* # of packets failed during quaranteen. */ struct timeval inputtimeout; struct timeval lastsoftintr; /* time of last soft interrupt */ struct timeval lastinputerr; /* time last sync error happened */ struct timeval idletimeout; packetbuf_t idlepacket; /* packet to send after idle timeout */ int watchdog; /* watchdog timer flag */ struct callout callout; /* watchdog timer call out */ struct callout softcallout; /* buffer timer call out */ struct cdev *dev; int lasterr; int cmdcount; int extended_buttons; }; static devclass_t psm_devclass; #define SYN_OFFSET(field) offsetof(struct psm_softc, syninfo.field) enum { SYNAPTICS_SYSCTL_MIN_PRESSURE = SYN_OFFSET(min_pressure), SYNAPTICS_SYSCTL_MAX_PRESSURE = SYN_OFFSET(max_pressure), SYNAPTICS_SYSCTL_MAX_WIDTH = SYN_OFFSET(max_width), SYNAPTICS_SYSCTL_MARGIN_TOP = SYN_OFFSET(margin_top), SYNAPTICS_SYSCTL_MARGIN_RIGHT = SYN_OFFSET(margin_right), SYNAPTICS_SYSCTL_MARGIN_BOTTOM = SYN_OFFSET(margin_bottom), SYNAPTICS_SYSCTL_MARGIN_LEFT = SYN_OFFSET(margin_left), SYNAPTICS_SYSCTL_NA_TOP = SYN_OFFSET(na_top), SYNAPTICS_SYSCTL_NA_RIGHT = SYN_OFFSET(na_right), SYNAPTICS_SYSCTL_NA_BOTTOM = SYN_OFFSET(na_bottom), SYNAPTICS_SYSCTL_NA_LEFT = SYN_OFFSET(na_left), SYNAPTICS_SYSCTL_WINDOW_MIN = SYN_OFFSET(window_min), SYNAPTICS_SYSCTL_WINDOW_MAX = SYN_OFFSET(window_max), SYNAPTICS_SYSCTL_MULTIPLICATOR = SYN_OFFSET(multiplicator), SYNAPTICS_SYSCTL_WEIGHT_CURRENT = SYN_OFFSET(weight_current), SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS = SYN_OFFSET(weight_previous), SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA = SYN_OFFSET(weight_previous_na), SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED = SYN_OFFSET(weight_len_squared), SYNAPTICS_SYSCTL_DIV_MIN = SYN_OFFSET(div_min), SYNAPTICS_SYSCTL_DIV_MAX = SYN_OFFSET(div_max), SYNAPTICS_SYSCTL_DIV_MAX_NA = SYN_OFFSET(div_max_na), SYNAPTICS_SYSCTL_DIV_LEN = SYN_OFFSET(div_len), SYNAPTICS_SYSCTL_TAP_MAX_DELTA = SYN_OFFSET(tap_max_delta), SYNAPTICS_SYSCTL_TAP_MIN_QUEUE = SYN_OFFSET(tap_min_queue), SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT = SYN_OFFSET(taphold_timeout), SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA = SYN_OFFSET(vscroll_hor_area), SYNAPTICS_SYSCTL_VSCROLL_VER_AREA = SYN_OFFSET(vscroll_ver_area), SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA = SYN_OFFSET(vscroll_min_delta), SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN = SYN_OFFSET(vscroll_div_min), SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX = SYN_OFFSET(vscroll_div_max), SYNAPTICS_SYSCTL_TOUCHPAD_OFF = SYN_OFFSET(touchpad_off), SYNAPTICS_SYSCTL_SOFTBUTTONS_Y = SYN_OFFSET(softbuttons_y), SYNAPTICS_SYSCTL_SOFTBUTTON2_X = SYN_OFFSET(softbutton2_x), SYNAPTICS_SYSCTL_SOFTBUTTON3_X = SYN_OFFSET(softbutton3_x), }; /* driver state flags (state) */ #define PSM_VALID 0x80 #define PSM_OPEN 1 /* Device is open */ #define PSM_ASLP 2 /* Waiting for mouse data */ #define PSM_SOFTARMED 4 /* Software interrupt armed */ #define PSM_NEED_SYNCBITS 8 /* Set syncbits using next data pkt */ /* driver configuration flags (config) */ #define PSM_CONFIG_RESOLUTION 0x000f /* resolution */ #define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */ #define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */ #define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */ #define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */ #define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */ #define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */ #define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */ #define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */ #define PSM_CONFIG_FLAGS \ (PSM_CONFIG_RESOLUTION | \ PSM_CONFIG_ACCEL | \ PSM_CONFIG_NOCHECKSYNC | \ PSM_CONFIG_NOIDPROBE | \ PSM_CONFIG_NORESET | \ PSM_CONFIG_FORCETAP | \ PSM_CONFIG_IGNPORTERROR | \ PSM_CONFIG_HOOKRESUME | \ PSM_CONFIG_INITAFTERSUSPEND) /* other flags (flags) */ #define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */ #define kbdcp(p) ((atkbdc_softc_t *)(p)) /* Tunables */ static int tap_enabled = -1; TUNABLE_INT("hw.psm.tap_enabled", &tap_enabled); static int synaptics_support = 0; TUNABLE_INT("hw.psm.synaptics_support", &synaptics_support); static int verbose = PSM_DEBUG; TUNABLE_INT("debug.psm.loglevel", &verbose); static int trackpoint_support = 0; TUNABLE_INT("hw.psm.trackpoint_support",&trackpoint_support); static int elantech_support = 0; TUNABLE_INT("hw.psm.elantech_support",&elantech_support); /* for backward compatibility */ #define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t) #define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t) #define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t) typedef struct old_mousehw { int buttons; int iftype; int type; int hwid; } old_mousehw_t; typedef struct old_mousemode { int protocol; int rate; int resolution; int accelfactor; } old_mousemode_t; /* packet formatting function */ typedef int packetfunc_t(struct psm_softc *, u_char *, int *, int, mousestatus_t *); /* function prototypes */ static void psmidentify(driver_t *, device_t); static int psmprobe(device_t); static int psmattach(device_t); static int psmdetach(device_t); static int psmresume(device_t); static d_open_t psmopen; static d_close_t psmclose; static d_read_t psmread; static d_ioctl_t psmioctl; static d_kqfilter_t psmkqfilter; static int enable_aux_dev(KBDC); static int disable_aux_dev(KBDC); static int get_mouse_status(KBDC, int *, int, int); static int get_aux_id(KBDC); static int set_mouse_sampling_rate(KBDC, int); static int set_mouse_scaling(KBDC, int); static int set_mouse_resolution(KBDC, int); static int set_mouse_mode(KBDC); static int get_mouse_buttons(KBDC); static void recover_from_error(KBDC); static int restore_controller(KBDC, int); static int doinitialize(struct psm_softc *, mousemode_t *); static int doopen(struct psm_softc *, int); static int reinitialize(struct psm_softc *, int); static char *model_name(int); static void psmsoftintr(void *); static void psmsoftintridle(void *); static void psmintr(void *); static void psmtimeout(void *); static void psmfilter_detach(struct knote *); static int psmfilter(struct knote *, long); static int timeelapsed(const struct timeval *, int, int, const struct timeval *); static void dropqueue(struct psm_softc *); static void flushpackets(struct psm_softc *); static void proc_mmanplus(struct psm_softc *, packetbuf_t *, mousestatus_t *, int *, int *, int *); static int proc_synaptics(struct psm_softc *, packetbuf_t *, mousestatus_t *, int *, int *, int *); static void proc_versapad(struct psm_softc *, packetbuf_t *, mousestatus_t *, int *, int *, int *); static int proc_elantech(struct psm_softc *, packetbuf_t *, mousestatus_t *, int *, int *, int *); static int psmpalmdetect(struct psm_softc *, finger_t *, int); static void psmgestures(struct psm_softc *, finger_t *, int, mousestatus_t *); static void psmsmoother(struct psm_softc *, finger_t *, int, mousestatus_t *, int *, int *); static int tame_mouse(struct psm_softc *, packetbuf_t *, mousestatus_t *, u_char *); /* vendor specific features */ enum probearg { PROBE, REINIT }; typedef int probefunc_t(struct psm_softc *, enum probearg); static int mouse_id_proc1(KBDC, int, int, int *); static int mouse_ext_command(KBDC, int); static int enable_groller(struct psm_softc *sc, enum probearg arg); static int enable_gmouse(struct psm_softc *sc, enum probearg arg); static int enable_aglide(struct psm_softc *sc, enum probearg arg); static int enable_kmouse(struct psm_softc *sc, enum probearg arg); static int enable_msexplorer(struct psm_softc *sc, enum probearg arg); static int enable_msintelli(struct psm_softc *sc, enum probearg arg); static int enable_4dmouse(struct psm_softc *sc, enum probearg arg); static int enable_4dplus(struct psm_softc *sc, enum probearg arg); static int enable_mmanplus(struct psm_softc *sc, enum probearg arg); static int enable_synaptics(struct psm_softc *sc, enum probearg arg); static int enable_trackpoint(struct psm_softc *sc, enum probearg arg); static int enable_versapad(struct psm_softc *sc, enum probearg arg); static int enable_elantech(struct psm_softc *sc, enum probearg arg); static void set_trackpoint_parameters(struct psm_softc *sc); static void synaptics_passthrough_on(struct psm_softc *sc); static void synaptics_passthrough_off(struct psm_softc *sc); static int synaptics_preferred_mode(struct psm_softc *sc); static void synaptics_set_mode(struct psm_softc *sc, int mode_byte); static struct { int model; u_char syncmask; int packetsize; probefunc_t *probefunc; } vendortype[] = { /* * WARNING: the order of probe is very important. Don't mess it * unless you know what you are doing. */ { MOUSE_MODEL_NET, /* Genius NetMouse */ 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse }, { MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */ 0xc8, 6, enable_groller }, { MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */ 0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus }, { MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */ 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer }, { MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */ 0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse }, { MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */ 0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus }, { MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad */ 0xc0, MOUSE_SYNAPTICS_PACKETSIZE, enable_synaptics }, { MOUSE_MODEL_ELANTECH, /* Elantech Touchpad */ 0x04, MOUSE_ELANTECH_PACKETSIZE, enable_elantech }, { MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */ 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli }, { MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */ 0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide }, { MOUSE_MODEL_THINK, /* Kensington ThinkingMouse */ 0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse }, { MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */ 0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad }, { MOUSE_MODEL_TRACKPOINT, /* IBM/Lenovo TrackPoint */ 0xc0, MOUSE_PS2_PACKETSIZE, enable_trackpoint }, { MOUSE_MODEL_GENERIC, 0xc0, MOUSE_PS2_PACKETSIZE, NULL }, }; #define GENERIC_MOUSE_ENTRY (NELEM(vendortype) - 1) /* device driver declaration */ static device_method_t psm_methods[] = { /* Device interface */ DEVMETHOD(device_identify, psmidentify), DEVMETHOD(device_probe, psmprobe), DEVMETHOD(device_attach, psmattach), DEVMETHOD(device_detach, psmdetach), DEVMETHOD(device_resume, psmresume), DEVMETHOD_END }; static driver_t psm_driver = { PSM_DRIVER_NAME, psm_methods, sizeof(struct psm_softc) }; static struct dev_ops psm_ops = { { PSM_DRIVER_NAME, 0, 0 }, .d_open = psmopen, .d_close = psmclose, .d_read = psmread, .d_ioctl = psmioctl, .d_kqfilter = psmkqfilter }; /* device I/O routines */ static int enable_aux_dev(KBDC kbdc) { int res; res = send_aux_command(kbdc, PSMC_ENABLE_DEV); VLOG(2, (LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res)); return (res == PSM_ACK); } static int disable_aux_dev(KBDC kbdc) { int res; res = send_aux_command(kbdc, PSMC_DISABLE_DEV); VLOG(2, (LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res)); return (res == PSM_ACK); } static int get_mouse_status(KBDC kbdc, int *status, int flag, int len) { int cmd; int res; int i; switch (flag) { case 0: default: cmd = PSMC_SEND_DEV_STATUS; break; case 1: cmd = PSMC_SEND_DEV_DATA; break; } empty_aux_buffer(kbdc, 5); res = send_aux_command(kbdc, cmd); VLOG(2, (LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n", (flag == 1) ? "DATA" : "STATUS", res)); if (res != PSM_ACK) return (0); for (i = 0; i < len; ++i) { status[i] = read_aux_data(kbdc); if (status[i] < 0) break; } VLOG(1, (LOG_DEBUG, "psm: %s %02x %02x %02x\n", (flag == 1) ? "data" : "status", status[0], status[1], status[2])); return (i); } static int get_aux_id(KBDC kbdc) { int id; int res; empty_aux_buffer(kbdc, 5); res = send_aux_command(kbdc, PSMC_SEND_DEV_ID); VLOG(2, (LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res)); if (res != PSM_ACK) return (-1); /* 10ms delay */ DRIVERSLEEP(10000); id = read_aux_data(kbdc); VLOG(2, (LOG_DEBUG, "psm: device ID: %04x\n", id)); return (id); } static int set_mouse_sampling_rate(KBDC kbdc, int rate) { int res; res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate); VLOG(2, (LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res)); return ((res == PSM_ACK) ? rate : -1); } static int set_mouse_scaling(KBDC kbdc, int scale) { int res; switch (scale) { case 1: default: scale = PSMC_SET_SCALING11; break; case 2: scale = PSMC_SET_SCALING21; break; } res = send_aux_command(kbdc, scale); VLOG(2, (LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n", (scale == PSMC_SET_SCALING21) ? "21" : "11", res)); return (res == PSM_ACK); } /* `val' must be 0 through PSMD_MAX_RESOLUTION */ static int set_mouse_resolution(KBDC kbdc, int val) { int res; res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val); VLOG(2, (LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res)); return ((res == PSM_ACK) ? val : -1); } /* * NOTE: once `set_mouse_mode()' is called, the mouse device must be * re-enabled by calling `enable_aux_dev()' */ static int set_mouse_mode(KBDC kbdc) { int res; res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE); VLOG(2, (LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res)); return (res == PSM_ACK); } static int get_mouse_buttons(KBDC kbdc) { int c = 2; /* assume two buttons by default */ int status[3]; /* * NOTE: a special sequence to obtain Logitech Mouse specific * information: set resolution to 25 ppi, set scaling to 1:1, set * scaling to 1:1, set scaling to 1:1. Then the second byte of the * mouse status bytes is the number of available buttons. * Some manufactures also support this sequence. */ if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW) return (c); if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) && get_mouse_status(kbdc, status, 0, 3) >= 3 && status[1] != 0) return (status[1]); return (c); } /* misc subroutines */ static char * model_name(int model) { static struct { int model_code; char *model_name; } models[] = { { MOUSE_MODEL_NETSCROLL, "NetScroll" }, { MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" }, { MOUSE_MODEL_GLIDEPOINT, "GlidePoint" }, { MOUSE_MODEL_THINK, "ThinkingMouse" }, { MOUSE_MODEL_INTELLI, "IntelliMouse" }, { MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" }, { MOUSE_MODEL_VERSAPAD, "VersaPad" }, { MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" }, { MOUSE_MODEL_4D, "4D Mouse" }, { MOUSE_MODEL_4DPLUS, "4D+ Mouse" }, { MOUSE_MODEL_SYNAPTICS, "Synaptics Touchpad" }, { MOUSE_MODEL_TRACKPOINT, "IBM/Lenovo TrackPoint" }, { MOUSE_MODEL_ELANTECH, "Elantech Touchpad" }, { MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" }, { MOUSE_MODEL_UNKNOWN, "Unknown" }, }; int i; for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i) if (models[i].model_code == model) break; return (models[i].model_name); } static void recover_from_error(KBDC kbdc) { /* discard anything left in the output buffer */ empty_both_buffers(kbdc, 10); #if 0 /* * NOTE: KBDC_RESET_KBD may not restore the communication between the * keyboard and the controller. */ reset_kbd(kbdc); #else /* * NOTE: somehow diagnostic and keyboard port test commands bring the * keyboard back. */ if (!test_controller(kbdc)) log(LOG_ERR, "psm: keyboard controller failed.\n"); /* if there isn't a keyboard in the system, the following error is OK */ if (test_kbd_port(kbdc) != 0) VLOG(1, (LOG_ERR, "psm: keyboard port failed.\n")); #endif } static int restore_controller(KBDC kbdc, int command_byte) { empty_both_buffers(kbdc, 10); if (!set_controller_command_byte(kbdc, 0xff, command_byte)) { log(LOG_ERR, "psm: failed to restore the keyboard controller " "command byte.\n"); empty_both_buffers(kbdc, 10); return (FALSE); } else { empty_both_buffers(kbdc, 10); return (TRUE); } } /* * Re-initialize the aux port and device. The aux port must be enabled * and its interrupt must be disabled before calling this routine. * The aux device will be disabled before returning. * The keyboard controller must be locked via `kbdc_lock()' before * calling this routine. */ static int doinitialize(struct psm_softc *sc, mousemode_t *mode) { KBDC kbdc = sc->kbdc; int stat[3]; int i; switch((i = test_aux_port(kbdc))) { case 1: /* ignore these errors */ case 2: case 3: case PSM_ACK: if (verbose) log(LOG_DEBUG, "psm%d: strange result for test aux port (%d).\n", sc->unit, i); /* FALLTHROUGH */ case 0: /* no error */ break; case -1: /* time out */ default: /* error */ recover_from_error(kbdc); if (sc->config & PSM_CONFIG_IGNPORTERROR) break; log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n", sc->unit, i); return (FALSE); } if (sc->config & PSM_CONFIG_NORESET) { /* * Don't try to reset the pointing device. It may possibly * be left in the unknown state, though... */ } else { /* * NOTE: some controllers appears to hang the `keyboard' when * the aux port doesn't exist and `PSMC_RESET_DEV' is issued. */ if (!reset_aux_dev(kbdc)) { recover_from_error(kbdc); log(LOG_ERR, "psm%d: failed to reset the aux device.\n", sc->unit); return (FALSE); } } /* * both the aux port and the aux device is functioning, see * if the device can be enabled. */ if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) { log(LOG_ERR, "psm%d: failed to enable the aux device.\n", sc->unit); return (FALSE); } empty_both_buffers(kbdc, 10); /* remove stray data if any */ /* Re-enable the mouse. */ for (i = 0; vendortype[i].probefunc != NULL; ++i) if (vendortype[i].model == sc->hw.model) (*vendortype[i].probefunc)(sc, REINIT); /* set mouse parameters */ if (mode != (mousemode_t *)NULL) { if (mode->rate > 0) mode->rate = set_mouse_sampling_rate(kbdc, mode->rate); if (mode->resolution >= 0) mode->resolution = set_mouse_resolution(kbdc, mode->resolution); set_mouse_scaling(kbdc, 1); set_mouse_mode(kbdc); } /* Record sync on the next data packet we see. */ sc->flags |= PSM_NEED_SYNCBITS; /* just check the status of the mouse */ if (get_mouse_status(kbdc, stat, 0, 3) < 3) log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n", sc->unit); return (TRUE); } static int doopen(struct psm_softc *sc, int command_byte) { int stat[3]; /* * FIXME: Synaptics TouchPad seems to go back to Relative Mode with * no obvious reason. Thus we check the current mode and restore the * Absolute Mode if it was cleared. * * The previous hack at the end of psmprobe() wasn't efficient when * moused(8) was restarted. * * A Reset (FF) or Set Defaults (F6) command would clear the * Absolute Mode bit. But a verbose boot or debug.psm.loglevel=5 * doesn't show any evidence of such a command. */ if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) { mouse_ext_command(sc->kbdc, 1); get_mouse_status(sc->kbdc, stat, 0, 3); if ((SYNAPTICS_VERSION_GE(sc->synhw, 7, 5) || stat[1] == 0x47) && stat[2] == 0x40) { synaptics_set_mode(sc, synaptics_preferred_mode(sc)); VLOG(5, (LOG_DEBUG, "psm%d: Synaptics Absolute Mode " "hopefully restored\n", sc->unit)); } } /* * A user may want to disable tap and drag gestures on a Synaptics * TouchPad when it operates in Relative Mode. */ if (sc->hw.model == MOUSE_MODEL_GENERIC) { if (tap_enabled > 0) { /* * Enable tap & drag gestures. We use a Mode Byte * and clear the DisGest bit (see §2.5 of Synaptics * TouchPad Interfacing Guide). */ VLOG(2, (LOG_DEBUG, "psm%d: enable tap and drag gestures\n", sc->unit)); mouse_ext_command(sc->kbdc, 0x00); set_mouse_sampling_rate(sc->kbdc, 20); } else if (tap_enabled == 0) { /* * Disable tap & drag gestures. We use a Mode Byte * and set the DisGest bit (see §2.5 of Synaptics * TouchPad Interfacing Guide). */ VLOG(2, (LOG_DEBUG, "psm%d: disable tap and drag gestures\n", sc->unit)); mouse_ext_command(sc->kbdc, 0x04); set_mouse_sampling_rate(sc->kbdc, 20); } } /* enable the mouse device */ if (!enable_aux_dev(sc->kbdc)) { /* MOUSE ERROR: failed to enable the mouse because: * 1) the mouse is faulty, * 2) the mouse has been removed(!?) * In the latter case, the keyboard may have hung, and need * recovery procedure... */ recover_from_error(sc->kbdc); #if 0 /* FIXME: we could reset the mouse here and try to enable * it again. But it will take long time and it's not a good * idea to disable the keyboard that long... */ if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) { recover_from_error(sc->kbdc); #else { #endif restore_controller(sc->kbdc, command_byte); /* mark this device is no longer available */ sc->state &= ~PSM_VALID; log(LOG_ERR, "psm%d: failed to enable the device (doopen).\n", sc->unit); return (EIO); } } if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n", sc->unit); /* enable the aux port and interrupt */ if (!set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) { /* CONTROLLER ERROR */ disable_aux_dev(sc->kbdc); restore_controller(sc->kbdc, command_byte); log(LOG_ERR, "psm%d: failed to enable the aux interrupt (doopen).\n", sc->unit); return (EIO); } /* start the watchdog timer */ sc->watchdog = FALSE; callout_reset(&sc->callout, hz * 2, psmtimeout, (void *)(uintptr_t)sc); return (0); } static int reinitialize(struct psm_softc *sc, int doinit) { int err; int c; /* don't let anybody mess with the aux device */ if (!kbdc_lock(sc->kbdc, TRUE)) return (EIO); lockmgr(&sc->lock, LK_EXCLUSIVE); /* block our watchdog timer */ sc->watchdog = FALSE; callout_stop(&sc->callout); /* save the current controller command byte */ empty_both_buffers(sc->kbdc, 10); c = get_controller_command_byte(sc->kbdc); VLOG(2, (LOG_DEBUG, "psm%d: current command byte: %04x (reinitialize).\n", sc->unit, c)); /* enable the aux port but disable the aux interrupt and the keyboard */ if ((c == -1) || !set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { /* CONTROLLER ERROR */ lockmgr(&sc->lock, LK_RELEASE); kbdc_lock(sc->kbdc, FALSE); log(LOG_ERR, "psm%d: unable to set the command byte (reinitialize).\n", sc->unit); return (EIO); } /* flush any data */ if (sc->state & PSM_VALID) { /* this may fail; but never mind... */ disable_aux_dev(sc->kbdc); empty_aux_buffer(sc->kbdc, 10); } flushpackets(sc); sc->syncerrors = 0; sc->pkterrors = 0; memset(&sc->lastinputerr, 0, sizeof(sc->lastinputerr)); /* try to detect the aux device; are you still there? */ err = 0; if (doinit) { if (doinitialize(sc, &sc->mode)) { /* yes */ sc->state |= PSM_VALID; } else { /* the device has gone! */ restore_controller(sc->kbdc, c); sc->state &= ~PSM_VALID; log(LOG_ERR, "psm%d: the aux device has gone! (reinitialize).\n", sc->unit); err = ENXIO; } } lockmgr(&sc->lock, LK_RELEASE); /* restore the driver state */ if ((sc->state & PSM_OPEN) && (err == 0)) { /* enable the aux device and the port again */ err = doopen(sc, c); if (err != 0) log(LOG_ERR, "psm%d: failed to enable the device " "(reinitialize).\n", sc->unit); } else { /* restore the keyboard port and disable the aux port */ if (!set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { /* CONTROLLER ERROR */ log(LOG_ERR, "psm%d: failed to disable the aux port " "(reinitialize).\n", sc->unit); err = EIO; } } kbdc_lock(sc->kbdc, FALSE); return (err); } /* psm driver entry points */ static void psmidentify(driver_t *driver, device_t parent) { device_t psmc; device_t psm; u_long irq; int unit; unit = device_get_unit(parent); /* always add at least one child */ psm = BUS_ADD_CHILD(parent, parent, KBDC_RID_AUX, driver->name, unit); if (psm == NULL) { return; } irq = bus_get_resource_start(psm, SYS_RES_IRQ, KBDC_RID_AUX); if (irq > 0) { return; } /* * If the PS/2 mouse device has already been reported by ACPI or * PnP BIOS, obtain the IRQ resource from it. * (See psmcpnp_attach() below.) */ psmc = device_find_child(device_get_parent(parent), PSMCPNP_DRIVER_NAME, unit); if (psmc == NULL) return; irq = bus_get_resource_start(psmc, SYS_RES_IRQ, 0); if (irq <= 0) { return; } bus_delete_resource(psmc, SYS_RES_IRQ, 0); bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1, machintr_legacy_intr_cpuid(irq)); } #define endprobe(v) do { \ if (bootverbose) \ --verbose; \ set_controller_command_byte(sc->kbdc, \ KBD_AUX_CONTROL_BITS, KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT); \ kbdc_lock(sc->kbdc, FALSE); \ return (v); \ } while (0) static int psmprobe(device_t dev) { int unit = device_get_unit(dev); struct psm_softc *sc = device_get_softc(dev); int stat[3]; int command_byte; /* int rid; */ int i; uintptr_t irq; uintptr_t flags; #if 0 kbdc_debug(TRUE); #endif BUS_READ_IVAR(device_get_parent(dev), dev, KBDC_IVAR_IRQ, &irq); BUS_READ_IVAR(device_get_parent(dev), dev, KBDC_IVAR_FLAGS, &flags); sc->unit = unit; sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev))); sc->config = flags & PSM_CONFIG_FLAGS; /* XXX: for backward compatibility */ #if defined(PSM_HOOKRESUME) sc->config |= #ifdef PSM_RESETAFTERSUSPEND PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND; #else PSM_CONFIG_HOOKRESUME; #endif #endif /* PSM_HOOKRESUME */ sc->flags = 0; if (bootverbose) ++verbose; device_set_desc(dev, "PS/2 Mouse"); if (!kbdc_lock(sc->kbdc, TRUE)) { kprintf("psm%d: unable to lock the controller.\n", unit); if (bootverbose) --verbose; return (ENXIO); } /* * NOTE: two bits in the command byte controls the operation of the * aux port (mouse port): the aux port disable bit (bit 5) and the aux * port interrupt (IRQ 12) enable bit (bit 2). */ /* discard anything left after the keyboard initialization */ empty_both_buffers(sc->kbdc, 10); /* save the current command byte; it will be used later */ command_byte = get_controller_command_byte(sc->kbdc); if (verbose) kprintf("psm%d: current command byte:%04x\n", unit, command_byte); if (command_byte == -1) { /* CONTROLLER ERROR */ kprintf("psm%d: unable to get the current " "command byte value.\n", unit); endprobe(ENXIO); } /* XXX: this note is of the previous code, kept intact in case any * breakage occurs. Since both comments contradict each other. * Previous condition used was: * * if (!set_controller_command_byte(sc->kbdc, * KBD_AUX_CONTROL_BITS, * KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) * * .. * NOTE: We cannot mess with the keyboard port, do NOT disable it * while we are probing the aux port during this routine. * Disabling the keyboard port will break some things * (Acer c720)... probably related to BIOS emulation of the * i8042. */ /* * disable the keyboard port while probing the aux port, which must be * enabled during this routine */ if (!set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { /* * this is CONTROLLER ERROR; I don't know how to recover * from this error... */ kprintf("psm%d: unable to set the command byte.\n", unit); endprobe(ENXIO); } /* * NOTE: Linux doesn't send discrete aux port enablement commands, * it is unclear whether this is needed or helps or hinders * bios emulators. */ write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT); /* * NOTE: `test_aux_port()' is designed to return with zero if the aux * port exists and is functioning. However, some controllers appears * to respond with zero even when the aux port doesn't exist. (It may * be that this is only the case when the controller DOES have the aux * port but the port is not wired on the motherboard.) The keyboard * controllers without the port, such as the original AT, are * supporsed to return with an error code or simply time out. In any * case, we have to continue probing the port even when the controller * passes this test. * * XXX: some controllers erroneously return the error code 1, 2 or 3 * when it has the perfectly functional aux port. We have to ignore * this error code. Even if the controller HAS error with the aux * port, it will be detected later... * XXX: another incompatible controller returns PSM_ACK (0xfa)... */ switch ((i = test_aux_port(sc->kbdc))) { case 1: /* ignore these errors */ case 2: case 3: case PSM_ACK: if (verbose) kprintf("psm%d: strange result for test aux port " "(%d).\n", unit, i); /* FALLTHROUGH */ case 0: /* no error */ break; case -1: /* time out */ default: /* error */ recover_from_error(sc->kbdc); if (sc->config & PSM_CONFIG_IGNPORTERROR) break; if (verbose) kprintf("psm%d: the aux port is not " "functioning (%d).\n", unit, i); endprobe(ENXIO); } if (sc->config & PSM_CONFIG_NORESET) { /* * Don't try to reset the pointing device. It may possibly be * left in the unknown state, though... */ } else { /* * NOTE: some controllers appears to hang the `keyboard' when * the aux port doesn't exist and `PSMC_RESET_DEV' is issued. * * Attempt to reset the controller twice -- this helps * pierce through some KVM switches. The second reset * is non-fatal. */ if (!reset_aux_dev(sc->kbdc)) { recover_from_error(sc->kbdc); if (verbose) kprintf("psm%d: failed to reset the aux " "device.\n", unit); endprobe(ENXIO); } else if (!reset_aux_dev(sc->kbdc)) { recover_from_error(sc->kbdc); if (verbose >= 2) kprintf("psm%d: failed to reset the aux device " "(2).\n", unit); } } /* * both the aux port and the aux device are functioning, see if the * device can be enabled. NOTE: when enabled, the device will start * sending data; we shall immediately disable the device once we know * the device can be enabled. */ if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) { /* MOUSE ERROR */ recover_from_error(sc->kbdc); if (verbose) kprintf("psm%d: failed to enable the aux device.\n", unit); endprobe(ENXIO); } /* save the default values after reset */ if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) { sc->dflt_mode.rate = sc->mode.rate = stat[2]; sc->dflt_mode.resolution = sc->mode.resolution = stat[1]; } else { sc->dflt_mode.rate = sc->mode.rate = -1; sc->dflt_mode.resolution = sc->mode.resolution = -1; } /* hardware information */ sc->hw.iftype = MOUSE_IF_PS2; #if 0 /* verify the device is a mouse */ sc->hw.hwid = get_aux_id(sc->kbdc); /* XXX Check against a list of PS2 device types. */ #endif switch (sc->hw.hwid) { case PSM_BALLPOINT_ID: sc->hw.type = MOUSE_TRACKBALL; break; case PSM_MOUSE_ID: case PSM_INTELLI_ID: case PSM_EXPLORER_ID: case PSM_4DMOUSE_ID: case PSM_4DPLUS_ID: sc->hw.type = MOUSE_MOUSE; break; default: sc->hw.type = MOUSE_UNKNOWN; break; } if (sc->config & PSM_CONFIG_NOIDPROBE) { sc->hw.buttons = 2; i = GENERIC_MOUSE_ENTRY; } else { /* # of buttons */ sc->hw.buttons = get_mouse_buttons(sc->kbdc); /* other parameters */ for (i = 0; vendortype[i].probefunc != NULL; ++i) if ((*vendortype[i].probefunc)(sc, PROBE)) { if (verbose >= 2) kprintf("psm%d: found %s\n", unit, model_name(vendortype[i].model)); break; } } sc->hw.model = vendortype[i].model; sc->dflt_mode.level = PSM_LEVEL_BASE; sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE; sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4; if (sc->config & PSM_CONFIG_NOCHECKSYNC) sc->dflt_mode.syncmask[0] = 0; else sc->dflt_mode.syncmask[0] = vendortype[i].syncmask; if (sc->config & PSM_CONFIG_FORCETAP) sc->dflt_mode.syncmask[0] &= ~MOUSE_PS2_TAP; sc->dflt_mode.syncmask[1] = 0; /* syncbits */ sc->mode = sc->dflt_mode; sc->mode.packetsize = vendortype[i].packetsize; /* set mouse parameters */ #if 0 /* * A version of Logitech FirstMouse+ won't report wheel movement, * if SET_DEFAULTS is sent... Don't use this command. * This f}}}ix was found by Takashi Nishida. */ i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS); if (verbose >= 2) kprintf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i); #endif if (sc->config & PSM_CONFIG_RESOLUTION) sc->mode.resolution = set_mouse_resolution(sc->kbdc, (sc->config & PSM_CONFIG_RESOLUTION) - 1); else if (sc->mode.resolution >= 0) sc->mode.resolution = set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution); if (sc->mode.rate > 0) sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate); set_mouse_scaling(sc->kbdc, 1); /* Record sync on the next data packet we see. */ sc->flags |= PSM_NEED_SYNCBITS; /* just check the status of the mouse */ /* * NOTE: XXX there are some arcane controller/mouse combinations out * there, which hung the controller unless there is data transmission * after ACK from the mouse. */ if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) kprintf("psm%d: failed to get status.\n", unit); else { /* * When in its native mode, some mice operate with different * default parameters than in the PS/2 compatible mode. */ sc->dflt_mode.rate = sc->mode.rate = stat[2]; sc->dflt_mode.resolution = sc->mode.resolution = stat[1]; } /* disable the aux port for now... */ if (!set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { /* * this is CONTROLLER ERROR; I don't know the proper way to * recover from this error... */ kprintf("psm%d: unable to set the command byte.\n", unit); endprobe(ENXIO); } /* done */ kbdc_lock(sc->kbdc, FALSE); return (0); } static int psmattach(device_t dev) { int unit = device_get_unit(dev); struct psm_softc *sc = device_get_softc(dev); int error; int rid; uintptr_t irq; /* Setup initial state */ sc->state = PSM_VALID; callout_init_lk(&sc->callout, &sc->lock); callout_init_lk(&sc->softcallout, &sc->lock); lockinit(&sc->lock, "psmlk", 0, LK_CANRECURSE); /* Setup our interrupt handler */ rid = KBDC_RID_AUX; BUS_READ_IVAR(device_get_parent(dev), dev, KBDC_IVAR_IRQ, &irq); sc->intr = bus_alloc_legacy_irq_resource(dev, &rid, irq, RF_ACTIVE); if (sc->intr == NULL) { return (ENXIO); } error = BUS_SETUP_INTR(device_get_parent(dev), dev, sc->intr, INTR_NOPOLL, psmintr, sc, &sc->ih, NULL, NULL); if (error) { bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr); return (error); } /* Done */ sc->dev = make_dev(&psm_ops, unit, 0, 0, 0666, "psm%d", unit); sc->dev->si_drv1 = sc; /* Some touchpad devices need full reinitialization after suspend. */ switch (sc->hw.model) { case MOUSE_MODEL_SYNAPTICS: case MOUSE_MODEL_GLIDEPOINT: case MOUSE_MODEL_VERSAPAD: case MOUSE_MODEL_ELANTECH: sc->config |= PSM_CONFIG_INITAFTERSUSPEND; break; default: if (sc->synhw.infoMajor >= 4 || sc->tphw > 0) sc->config |= PSM_CONFIG_INITAFTERSUSPEND; break; } /* Elantech trackpad`s sync bit differs from touchpad`s one */ if (sc->hw.model == MOUSE_MODEL_ELANTECH && (sc->elanhw.hascrc || sc->elanhw.hastrackpoint)) sc->config |= PSM_CONFIG_NOCHECKSYNC; if (!verbose) kprintf("psm%d: model %s, device ID %d\n", unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff); else { kprintf("psm%d: model %s, device ID %d-%02x, %d buttons\n", unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff, sc->hw.hwid >> 8, sc->hw.buttons); kprintf("psm%d: config:%08x, flags:%08x, packet size:%d\n", unit, sc->config, sc->flags, sc->mode.packetsize); kprintf("psm%d: syncmask:%02x, syncbits:%02x\n", unit, sc->mode.syncmask[0], sc->mode.syncmask[1]); } if (bootverbose) --verbose; return (0); } static int psmdetach(device_t dev) { struct psm_softc *sc; int rid; sc = device_get_softc(dev); if (sc->state & PSM_OPEN) return (EBUSY); rid = KBDC_RID_AUX; bus_teardown_intr(dev, sc->intr, sc->ih); bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr); destroy_dev(sc->dev); /* XXX: callout_drain in original freebsd11 code */ callout_terminate(&sc->callout); callout_terminate(&sc->softcallout); return (0); } static int psmopen(struct dev_open_args *ap) { cdev_t dev = ap->a_head.a_dev; struct psm_softc *sc; int command_byte; int err; /* Get device data */ sc = dev->si_drv1; if ((sc == NULL) || (sc->state & PSM_VALID) == 0) { /* the device is no longer valid/functioning */ return (ENXIO); } /* Disallow multiple opens */ if (sc->state & PSM_OPEN) return (EBUSY); device_busy(devclass_get_device(psm_devclass, sc->unit)); /* Initialize state */ sc->mode.level = sc->dflt_mode.level; sc->mode.protocol = sc->dflt_mode.protocol; sc->watchdog = FALSE; /* flush the event queue */ sc->queue.count = 0; sc->queue.head = 0; sc->queue.tail = 0; sc->status.flags = 0; sc->status.button = 0; sc->status.obutton = 0; sc->status.dx = 0; sc->status.dy = 0; sc->status.dz = 0; sc->button = 0; sc->pqueue_start = 0; sc->pqueue_end = 0; /* empty input buffer */ flushpackets(sc); sc->syncerrors = 0; sc->pkterrors = 0; /* don't let timeout routines in the keyboard driver to poll the kbdc */ if (!kbdc_lock(sc->kbdc, TRUE)) return (EIO); /* save the current controller command byte */ lockmgr(&sc->lock, LK_EXCLUSIVE); command_byte = get_controller_command_byte(sc->kbdc); /* enable the aux port and temporalily disable the keyboard */ if (command_byte == -1 || !set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { /* CONTROLLER ERROR; do you know how to get out of this? */ kbdc_lock(sc->kbdc, FALSE); lockmgr(&sc->lock, LK_RELEASE); log(LOG_ERR, "psm%d: unable to set the command byte (psmopen).\n", sc->unit); return (EIO); } /* * Now that the keyboard controller is told not to generate * the keyboard and mouse interrupts, allow * the other tty interrupts. The clock interrupt may also occur, * but timeout routines will be blocked by the poll flag set * via `kbdc_lock()' */ lockmgr(&sc->lock, LK_RELEASE); /* enable the mouse device */ err = doopen(sc, command_byte); /* done */ if (err == 0) sc->state |= PSM_OPEN; kbdc_lock(sc->kbdc, FALSE); return (err); } static int psmclose(struct dev_close_args *ap) { cdev_t dev = ap->a_head.a_dev; struct psm_softc *sc = dev->si_drv1; int stat[3]; int command_byte; /* don't let timeout routines in the keyboard driver to poll the kbdc */ if (!kbdc_lock(sc->kbdc, TRUE)) return (EIO); /* save the current controller command byte */ lockmgr(&sc->lock, LK_EXCLUSIVE); command_byte = get_controller_command_byte(sc->kbdc); if (command_byte == -1) { kbdc_lock(sc->kbdc, FALSE); lockmgr(&sc->lock, LK_RELEASE); return (EIO); } /* disable the aux interrupt and temporalily disable the keyboard */ if (!set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { log(LOG_ERR, "psm%d: failed to disable the aux int (psmclose).\n", sc->unit); /* CONTROLLER ERROR; * NOTE: we shall force our way through. Because the only * ill effect we shall see is that we may not be able * to read ACK from the mouse, and it doesn't matter much * so long as the mouse will accept the DISABLE command. */ } lockmgr(&sc->lock, LK_RELEASE); /* stop the watchdog timer */ callout_stop(&sc->callout); /* remove anything left in the output buffer */ empty_aux_buffer(sc->kbdc, 10); /* disable the aux device, port and interrupt */ if (sc->state & PSM_VALID) { if (!disable_aux_dev(sc->kbdc)) { /* MOUSE ERROR; * NOTE: we don't return (error) and continue, * pretending we have successfully disabled the device. * It's OK because the interrupt routine will discard * any data from the mouse hereafter. */ log(LOG_ERR, "psm%d: failed to disable the device (psmclose).\n", sc->unit); } if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) log(LOG_DEBUG, "psm%d: failed to get status (psmclose).\n", sc->unit); } if (!set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { /* * CONTROLLER ERROR; * we shall ignore this error; see the above comment. */ log(LOG_ERR, "psm%d: failed to disable the aux port (psmclose).\n", sc->unit); } /* remove anything left in the output buffer */ empty_aux_buffer(sc->kbdc, 10); /* close is almost always successful */ sc->state &= ~PSM_OPEN; kbdc_lock(sc->kbdc, FALSE); device_unbusy(devclass_get_device(psm_devclass, sc->unit)); return (0); } static int tame_mouse(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *status, u_char *buf) { static u_char butmapps2[8] = { 0, MOUSE_PS2_BUTTON1DOWN, MOUSE_PS2_BUTTON2DOWN, MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN, MOUSE_PS2_BUTTON3DOWN, MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN, MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN, MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN, }; static u_char butmapmsc[8] = { MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP, MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP, MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP, MOUSE_MSC_BUTTON3UP, MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP, MOUSE_MSC_BUTTON2UP, MOUSE_MSC_BUTTON1UP, 0, }; int mapped; int i; if (sc->mode.level == PSM_LEVEL_BASE) { mapped = status->button & ~MOUSE_BUTTON4DOWN; if (status->button & MOUSE_BUTTON4DOWN) mapped |= MOUSE_BUTTON1DOWN; status->button = mapped; buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS]; i = imax(imin(status->dx, 255), -256); if (i < 0) buf[0] |= MOUSE_PS2_XNEG; buf[1] = i; i = imax(imin(status->dy, 255), -256); if (i < 0) buf[0] |= MOUSE_PS2_YNEG; buf[2] = i; return (MOUSE_PS2_PACKETSIZE); } else if (sc->mode.level == PSM_LEVEL_STANDARD) { buf[0] = MOUSE_MSC_SYNC | butmapmsc[status->button & MOUSE_STDBUTTONS]; i = imax(imin(status->dx, 255), -256); buf[1] = i >> 1; buf[3] = i - buf[1]; i = imax(imin(status->dy, 255), -256); buf[2] = i >> 1; buf[4] = i - buf[2]; i = imax(imin(status->dz, 127), -128); buf[5] = (i >> 1) & 0x7f; buf[6] = (i - (i >> 1)) & 0x7f; buf[7] = (~status->button >> 3) & 0x7f; return (MOUSE_SYS_PACKETSIZE); } return (pb->inputbytes); } static int psmread(struct dev_read_args *ap) { cdev_t dev = ap->a_head.a_dev; struct uio *uio = ap->a_uio; struct psm_softc *sc = dev->si_drv1; u_char buf[PSM_SMALLBUFSIZE]; int error = 0; int l; if ((sc->state & PSM_VALID) == 0) return (EIO); /* block until mouse activity occurred */ lockmgr(&sc->lock, LK_EXCLUSIVE); while (sc->queue.count <= 0) { if (ap->a_ioflag & IO_NDELAY) { lockmgr(&sc->lock, LK_RELEASE); return (EWOULDBLOCK); } sc->state |= PSM_ASLP; error = lksleep(sc, &sc->lock, PCATCH, "psmrea", 0); sc->state &= ~PSM_ASLP; if (error) { lockmgr(&sc->lock, LK_RELEASE); return (error); } else if ((sc->state & PSM_VALID) == 0) { /* the device disappeared! */ lockmgr(&sc->lock, LK_RELEASE); return (EIO); } } lockmgr(&sc->lock, LK_RELEASE); /* copy data to the user land */ while ((sc->queue.count > 0) && (uio->uio_resid > 0)) { lockmgr(&sc->lock, LK_EXCLUSIVE); l = imin(sc->queue.count, uio->uio_resid); if (l > sizeof(buf)) l = sizeof(buf); if (l > sizeof(sc->queue.buf) - sc->queue.head) { bcopy(&sc->queue.buf[sc->queue.head], &buf[0], sizeof(sc->queue.buf) - sc->queue.head); bcopy(&sc->queue.buf[0], &buf[sizeof(sc->queue.buf) - sc->queue.head], l - (sizeof(sc->queue.buf) - sc->queue.head)); } else bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l); sc->queue.count -= l; sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf); lockmgr(&sc->lock, LK_RELEASE); error = uiomove(buf, l, uio); if (error) break; } return (error); } static int block_mouse_data(struct psm_softc *sc, int *c) { if (!kbdc_lock(sc->kbdc, TRUE)) return (EIO); lockmgr(&sc->lock, LK_EXCLUSIVE); *c = get_controller_command_byte(sc->kbdc); if ((*c == -1) || !set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { /* this is CONTROLLER ERROR */ lockmgr(&sc->lock, LK_RELEASE); kbdc_lock(sc->kbdc, FALSE); return (EIO); } /* * The device may be in the middle of status data transmission. * The transmission will be interrupted, thus, incomplete status * data must be discarded. Although the aux interrupt is disabled * at the keyboard controller level, at most one aux interrupt * may have already been pending and a data byte is in the * output buffer; throw it away. Note that the second argument * to `empty_aux_buffer()' is zero, so that the call will just * flush the internal queue. * `psmintr()' will be invoked after the lock is released if an * interrupt is pending; it will see no data and returns immediately. */ empty_aux_buffer(sc->kbdc, 0); /* flush the queue */ read_aux_data_no_wait(sc->kbdc); /* throw away data if any */ flushpackets(sc); lockmgr(&sc->lock, LK_RELEASE); return (0); } static void dropqueue(struct psm_softc *sc) { sc->queue.count = 0; sc->queue.head = 0; sc->queue.tail = 0; if ((sc->state & PSM_SOFTARMED) != 0) { sc->state &= ~PSM_SOFTARMED; callout_stop(&sc->softcallout); } sc->pqueue_start = sc->pqueue_end; } static void flushpackets(struct psm_softc *sc) { dropqueue(sc); bzero(&sc->pqueue, sizeof(sc->pqueue)); } static int unblock_mouse_data(struct psm_softc *sc, int c) { int error = 0; /* * We may have seen a part of status data during `set_mouse_XXX()'. * they have been queued; flush it. */ empty_aux_buffer(sc->kbdc, 0); /* restore ports and interrupt */ if (!set_controller_command_byte(sc->kbdc, KBD_AUX_CONTROL_BITS, c & KBD_AUX_CONTROL_BITS)) { /* * CONTROLLER ERROR; this is serious, we may have * been left with the inaccessible keyboard and * the disabled mouse interrupt. */ error = EIO; } kbdc_lock(sc->kbdc, FALSE); return (error); } static int psmioctl(struct dev_ioctl_args *ap) { cdev_t dev = ap->a_head.a_dev; caddr_t addr= ap->a_data; struct psm_softc *sc = dev->si_drv1; mousemode_t mode; mousestatus_t status; #if (defined(MOUSE_GETVARS)) mousevar_t *var; #endif mousedata_t *data; int stat[3]; int command_byte; int error = 0; /* Perform IOCTL command */ switch (ap->a_cmd) { case OLD_MOUSE_GETHWINFO: lockmgr(&sc->lock, LK_EXCLUSIVE); ((old_mousehw_t *)addr)->buttons = sc->hw.buttons; ((old_mousehw_t *)addr)->iftype = sc->hw.iftype; ((old_mousehw_t *)addr)->type = sc->hw.type; ((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff; lockmgr(&sc->lock, LK_RELEASE); break; case MOUSE_GETHWINFO: lockmgr(&sc->lock, LK_EXCLUSIVE); *(mousehw_t *)addr = sc->hw; if (sc->mode.level == PSM_LEVEL_BASE) ((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC; lockmgr(&sc->lock, LK_RELEASE); break; case MOUSE_SYN_GETHWINFO: lockmgr(&sc->lock, LK_EXCLUSIVE); if (sc->synhw.infoMajor >= 4) *(synapticshw_t *)addr = sc->synhw; else error = EINVAL; lockmgr(&sc->lock, LK_RELEASE); break; case OLD_MOUSE_GETMODE: lockmgr(&sc->lock, LK_EXCLUSIVE); switch (sc->mode.level) { case PSM_LEVEL_BASE: ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; break; case PSM_LEVEL_STANDARD: ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE; break; } ((old_mousemode_t *)addr)->rate = sc->mode.rate; ((old_mousemode_t *)addr)->resolution = sc->mode.resolution; ((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor; lockmgr(&sc->lock, LK_RELEASE); break; case MOUSE_GETMODE: lockmgr(&sc->lock, LK_EXCLUSIVE); *(mousemode_t *)addr = sc->mode; if ((sc->flags & PSM_NEED_SYNCBITS) != 0) { ((mousemode_t *)addr)->syncmask[0] = 0; ((mousemode_t *)addr)->syncmask[1] = 0; } ((mousemode_t *)addr)->resolution = MOUSE_RES_LOW - sc->mode.resolution; switch (sc->mode.level) { case PSM_LEVEL_BASE: ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; ((mousemode_t *)addr)->packetsize = MOUSE_PS2_PACKETSIZE; break; case PSM_LEVEL_STANDARD: ((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE; ((mousemode_t *)addr)->packetsize = MOUSE_SYS_PACKETSIZE; ((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK; ((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC; break; } lockmgr(&sc->lock, LK_RELEASE); break; case OLD_MOUSE_SETMODE: case MOUSE_SETMODE: if (ap->a_cmd == OLD_MOUSE_SETMODE) { mode.rate = ((old_mousemode_t *)addr)->rate; /* * resolution old I/F new I/F * default 0 0 * low 1 -2 * medium low 2 -3 * medium high 3 -4 * high 4 -5 */ if (((old_mousemode_t *)addr)->resolution > 0) mode.resolution = -((old_mousemode_t *)addr)->resolution - 1; else mode.resolution = 0; mode.accelfactor = ((old_mousemode_t *)addr)->accelfactor; mode.level = -1; } else mode = *(mousemode_t *)addr; /* adjust and validate parameters. */ if (mode.rate > UCHAR_MAX) return (EINVAL); if (mode.rate == 0) mode.rate = sc->dflt_mode.rate; else if (mode.rate == -1) /* don't change the current setting */ ; else if (mode.rate < 0) return (EINVAL); if (mode.resolution >= UCHAR_MAX) return (EINVAL); if (mode.resolution >= 200) mode.resolution = MOUSE_RES_HIGH; else if (mode.resolution >= 100) mode.resolution = MOUSE_RES_MEDIUMHIGH; else if (mode.resolution >= 50) mode.resolution = MOUSE_RES_MEDIUMLOW; else if (mode.resolution > 0) mode.resolution = MOUSE_RES_LOW; if (mode.resolution == MOUSE_RES_DEFAULT) mode.resolution = sc->dflt_mode.resolution; else if (mode.resolution == -1) /* don't change the current setting */ ; else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */ mode.resolution = MOUSE_RES_LOW - mode.resolution; if (mode.level == -1) /* don't change the current setting */ mode.level = sc->mode.level; else if ((mode.level < PSM_LEVEL_MIN) || (mode.level > PSM_LEVEL_MAX)) return (EINVAL); if (mode.accelfactor == -1) /* don't change the current setting */ mode.accelfactor = sc->mode.accelfactor; else if (mode.accelfactor < 0) return (EINVAL); /* don't allow anybody to poll the keyboard controller */ error = block_mouse_data(sc, &command_byte); if (error) return (error); /* set mouse parameters */ if (mode.rate > 0) mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate); if (mode.resolution >= 0) mode.resolution = set_mouse_resolution(sc->kbdc, mode.resolution); set_mouse_scaling(sc->kbdc, 1); get_mouse_status(sc->kbdc, stat, 0, 3); lockmgr(&sc->lock, LK_EXCLUSIVE); sc->mode.rate = mode.rate; sc->mode.resolution = mode.resolution; sc->mode.accelfactor = mode.accelfactor; sc->mode.level = mode.level; lockmgr(&sc->lock, LK_RELEASE); unblock_mouse_data(sc, command_byte); break; case MOUSE_GETLEVEL: *(int *)addr = sc->mode.level; break; case MOUSE_SETLEVEL: if ((*(int *)addr < PSM_LEVEL_MIN) || (*(int *)addr > PSM_LEVEL_MAX)) return (EINVAL); sc->mode.level = *(int *)addr; break; case MOUSE_GETSTATUS: lockmgr(&sc->lock, LK_EXCLUSIVE); status = sc->status; sc->status.flags = 0; sc->status.obutton = sc->status.button; sc->status.button = 0; sc->status.dx = 0; sc->status.dy = 0; sc->status.dz = 0; lockmgr(&sc->lock, LK_RELEASE); *(mousestatus_t *)addr = status; break; #if (defined(MOUSE_GETVARS)) case MOUSE_GETVARS: var = (mousevar_t *)addr; bzero(var, sizeof(*var)); lockmgr(&sc->lock, LK_EXCLUSIVE); var->var[0] = MOUSE_VARS_PS2_SIG; var->var[1] = sc->config; var->var[2] = sc->flags; lockmgr(&sc->lock, LK_RELEASE); break; case MOUSE_SETVARS: return (ENODEV); #endif /* MOUSE_GETVARS */ case MOUSE_READSTATE: case MOUSE_READDATA: data = (mousedata_t *)addr; if (data->len > sizeof(data->buf)/sizeof(data->buf[0])) return (EINVAL); error = block_mouse_data(sc, &command_byte); if (error) return (error); if ((data->len = get_mouse_status(sc->kbdc, data->buf, (ap->a_cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0) error = EIO; unblock_mouse_data(sc, command_byte); break; #if (defined(MOUSE_SETRESOLUTION)) case MOUSE_SETRESOLUTION: mode.resolution = *(int *)addr; if (mode.resolution >= UCHAR_MAX) return (EINVAL); else if (mode.resolution >= 200) mode.resolution = MOUSE_RES_HIGH; else if (mode.resolution >= 100) mode.resolution = MOUSE_RES_MEDIUMHIGH; else if (mode.resolution >= 50) mode.resolution = MOUSE_RES_MEDIUMLOW; else if (mode.resolution > 0) mode.resolution = MOUSE_RES_LOW; if (mode.resolution == MOUSE_RES_DEFAULT) mode.resolution = sc->dflt_mode.resolution; else if (mode.resolution == -1) mode.resolution = sc->mode.resolution; else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */ mode.resolution = MOUSE_RES_LOW - mode.resolution; error = block_mouse_data(sc, &command_byte); if (error) return (error); sc->mode.resolution = set_mouse_resolution(sc->kbdc, mode.resolution); if (sc->mode.resolution != mode.resolution) error = EIO; unblock_mouse_data(sc, command_byte); break; #endif /* MOUSE_SETRESOLUTION */ #if (defined(MOUSE_SETRATE)) case MOUSE_SETRATE: mode.rate = *(int *)addr; if (mode.rate > UCHAR_MAX) return (EINVAL); if (mode.rate == 0) mode.rate = sc->dflt_mode.rate; else if (mode.rate < 0) mode.rate = sc->mode.rate; error = block_mouse_data(sc, &command_byte); if (error) return (error); sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate); if (sc->mode.rate != mode.rate) error = EIO; unblock_mouse_data(sc, command_byte); break; #endif /* MOUSE_SETRATE */ #if (defined(MOUSE_SETSCALING)) case MOUSE_SETSCALING: if ((*(int *)addr <= 0) || (*(int *)addr > 2)) return (EINVAL); error = block_mouse_data(sc, &command_byte); if (error) return (error); if (!set_mouse_scaling(sc->kbdc, *(int *)addr)) error = EIO; unblock_mouse_data(sc, command_byte); break; #endif /* MOUSE_SETSCALING */ #if (defined(MOUSE_GETHWID)) case MOUSE_GETHWID: error = block_mouse_data(sc, &command_byte); if (error) return (error); sc->hw.hwid &= ~0x00ff; sc->hw.hwid |= get_aux_id(sc->kbdc); *(int *)addr = sc->hw.hwid & 0x00ff; unblock_mouse_data(sc, command_byte); break; #endif /* MOUSE_GETHWID */ case FIONBIO: case FIOASYNC: break; case FIOSETOWN: break; case FIOGETOWN: break; default: return (ENOTTY); } return (error); } static void psmtimeout(void *arg) { struct psm_softc *sc; sc = (struct psm_softc *)arg; lockmgr(&sc->lock, LK_EXCLUSIVE); if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) { VLOG(4, (LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit)); psmintr(sc); kbdc_lock(sc->kbdc, FALSE); } sc->watchdog = TRUE; lockmgr(&sc->lock, LK_RELEASE); callout_reset(&sc->callout, hz, psmtimeout, (void *)(uintptr_t)sc); } /* Add all sysctls under the debug.psm and hw.psm nodes */ SYSCTL_NODE(_debug, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse"); SYSCTL_NODE(_hw, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse"); SYSCTL_INT(_debug_psm, OID_AUTO, loglevel, CTLFLAG_RW, &verbose, 0, "Verbosity level"); static int psmhz = 20; SYSCTL_INT(_debug_psm, OID_AUTO, hz, CTLFLAG_RW, &psmhz, 0, "Frequency of the softcallout (in hz)"); static int psmerrsecs = 2; SYSCTL_INT(_debug_psm, OID_AUTO, errsecs, CTLFLAG_RW, &psmerrsecs, 0, "Number of seconds during which packets will dropped after a sync error"); static int psmerrusecs = 0; SYSCTL_INT(_debug_psm, OID_AUTO, errusecs, CTLFLAG_RW, &psmerrusecs, 0, "Microseconds to add to psmerrsecs"); static int psmsecs = 0; SYSCTL_INT(_debug_psm, OID_AUTO, secs, CTLFLAG_RW, &psmsecs, 0, "Max number of seconds between soft interrupts"); static int psmusecs = 500000; SYSCTL_INT(_debug_psm, OID_AUTO, usecs, CTLFLAG_RW, &psmusecs, 0, "Microseconds to add to psmsecs"); static int pkterrthresh = 2; SYSCTL_INT(_debug_psm, OID_AUTO, pkterrthresh, CTLFLAG_RW, &pkterrthresh, 0, "Number of error packets allowed before reinitializing the mouse"); SYSCTL_INT(_hw_psm, OID_AUTO, tap_enabled, CTLFLAG_RW, &tap_enabled, 0, "Enable tap and drag gestures"); static int tap_threshold = PSM_TAP_THRESHOLD; SYSCTL_INT(_hw_psm, OID_AUTO, tap_threshold, CTLFLAG_RW, &tap_threshold, 0, "Button tap threshold"); static int tap_timeout = PSM_TAP_TIMEOUT; SYSCTL_INT(_hw_psm, OID_AUTO, tap_timeout, CTLFLAG_RW, &tap_timeout, 0, "Tap timeout for touchpads"); /* Tunables; defined near top of file */ SYSCTL_INT(_hw_psm, OID_AUTO, synaptics_support, CTLFLAG_RD, &synaptics_support, 0, "Enable support for Synaptics touchpads"); SYSCTL_INT(_hw_psm, OID_AUTO, trackpoint_support, CTLFLAG_RD, &trackpoint_support, 0, "Enable support for IBM/Lenovo TrackPoint"); SYSCTL_INT(_hw_psm, OID_AUTO, elantech_support, CTLFLAG_RD, &elantech_support, 0, "Enable support for Elantech touchpads"); static void psmintr(void *arg) { struct psm_softc *sc = arg; struct timeval now; int c; packetbuf_t *pb; /* read until there is nothing to read */ while((c = read_aux_data_no_wait(sc->kbdc)) != -1) { pb = &sc->pqueue[sc->pqueue_end]; /* discard the byte if the device is not open */ if ((sc->state & PSM_OPEN) == 0) continue; getmicrouptime(&now); if ((pb->inputbytes > 0) && timevalcmp(&now, &sc->inputtimeout, >)) { VLOG(3, (LOG_DEBUG, "psmintr: delay too long; " "resetting byte count\n")); pb->inputbytes = 0; sc->syncerrors = 0; sc->pkterrors = 0; } sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT / 1000000; sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT % 1000000; timevaladd(&sc->inputtimeout, &now); pb->ipacket[pb->inputbytes++] = c; KKASSERT(pb->inputbytes <= sizeof(pb->ipacket)); if (pb->inputbytes < sc->mode.packetsize) continue; VLOG(4, (LOG_DEBUG, "psmintr: %02x %02x %02x %02x %02x %02x\n", pb->ipacket[0], pb->ipacket[1], pb->ipacket[2], pb->ipacket[3], pb->ipacket[4], pb->ipacket[5])); c = pb->ipacket[0]; if ((sc->flags & PSM_NEED_SYNCBITS) != 0) { sc->mode.syncmask[1] = (c & sc->mode.syncmask[0]); sc->flags &= ~PSM_NEED_SYNCBITS; VLOG(2, (LOG_DEBUG, "psmintr: Sync bytes now %04x,%04x\n", sc->mode.syncmask[0], sc->mode.syncmask[0])); } else if ((c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) { VLOG(3, (LOG_DEBUG, "psmintr: out of sync " "(%04x != %04x) %d cmds since last error.\n", c & sc->mode.syncmask[0], sc->mode.syncmask[1], sc->cmdcount - sc->lasterr)); sc->lasterr = sc->cmdcount; /* * The sync byte test is a weak measure of packet * validity. */ if (sc->syncerrors == 0) sc->pkterrors++; ++sc->syncerrors; if (sc->syncerrors >= sc->mode.packetsize * 2 || sc->pkterrors >= pkterrthresh) { /* * If we've failed to find a single sync byte * in 2 packets worth of data, or we've seen * persistent packet errors during the * validation period, reinitialize the mouse * in hopes of returning it to the expected * mode. * * reset inputbytes in case reinitialize() * fails to prevent it from incrementing * forever. */ VLOG(3, (LOG_DEBUG, "psmintr: reset the mouse.\n")); sc->lastinputerr = now; dropqueue(sc); pb->inputbytes = 0; reinitialize(sc, TRUE); } else if (sc->syncerrors == sc->mode.packetsize) { /* * Try a soft reset after searching for a sync * byte through a packet length of bytes. */ VLOG(3, (LOG_DEBUG, "psmintr: re-enable the mouse.\n")); sc->lastinputerr = now; dropqueue(sc); pb->inputbytes = 0; disable_aux_dev(sc->kbdc); enable_aux_dev(sc->kbdc); } else { VLOG(3, (LOG_DEBUG, "psmintr: discard a byte (%d)\n", sc->syncerrors)); pb->inputbytes--; bcopy(&pb->ipacket[1], &pb->ipacket[0], pb->inputbytes); } continue; } /* * We have what appears to be a valid packet. * Reset the error counters. */ sc->syncerrors = 0; /* * Drop even good packets if they occur within a timeout * period of a sync error. This allows the detection of * a change in the mouse's packet mode without exposing * erratic mouse behavior to the user. Some KVMs forget * enhanced mouse modes during switch events. */ if (!timeelapsed(&sc->lastinputerr, psmerrsecs, psmerrusecs, &now)) { pb->inputbytes = 0; continue; } /* * Now that we're out of the validation period, reset * the packet error count. */ sc->pkterrors = 0; sc->cmdcount++; if (++sc->pqueue_end >= PSM_PACKETQUEUE) sc->pqueue_end = 0; /* * If we've filled the queue then call the softintr ourselves, * otherwise schedule the interrupt for later. */ if (!timeelapsed(&sc->lastsoftintr, psmsecs, psmusecs, &now) || (sc->pqueue_end == sc->pqueue_start)) { if ((sc->state & PSM_SOFTARMED) != 0) { sc->state &= ~PSM_SOFTARMED; callout_stop(&sc->softcallout); } psmsoftintr(arg); } else if ((sc->state & PSM_SOFTARMED) == 0) { sc->state |= PSM_SOFTARMED; callout_reset(&sc->softcallout, psmhz < 1 ? 1 : (hz/psmhz), psmsoftintr, arg); } } } static void proc_mmanplus(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms, int *x, int *y, int *z) { /* * PS2++ protocl packet * * b7 b6 b5 b4 b3 b2 b1 b0 * byte 1: * 1 p3 p2 1 * * * * byte 2: c1 c2 p1 p0 d1 d0 1 0 * * p3-p0: packet type * c1, c2: c1 & c2 == 1, if p2 == 0 * c1 & c2 == 0, if p2 == 1 * * packet type: 0 (device type) * See comments in enable_mmanplus() below. * * packet type: 1 (wheel data) * * b7 b6 b5 b4 b3 b2 b1 b0 * byte 3: h * B5 B4 s d2 d1 d0 * * h: 1, if horizontal roller data * 0, if vertical roller data * B4, B5: button 4 and 5 * s: sign bit * d2-d0: roller data * * packet type: 2 (reserved) */ if (((pb->ipacket[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) && (abs(*x) > 191) && MOUSE_PS2PLUS_CHECKBITS(pb->ipacket)) { /* * the extended data packet encodes button * and wheel events */ switch (MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket)) { case 1: /* wheel data packet */ *x = *y = 0; if (pb->ipacket[2] & 0x80) { /* XXX horizontal roller count - ignore it */ ; } else { /* vertical roller count */ *z = (pb->ipacket[2] & MOUSE_PS2PLUS_ZNEG) ? (pb->ipacket[2] & 0x0f) - 16 : (pb->ipacket[2] & 0x0f); } ms->button |= (pb->ipacket[2] & MOUSE_PS2PLUS_BUTTON4DOWN) ? MOUSE_BUTTON4DOWN : 0; ms->button |= (pb->ipacket[2] & MOUSE_PS2PLUS_BUTTON5DOWN) ? MOUSE_BUTTON5DOWN : 0; break; case 2: /* * this packet type is reserved by * Logitech... */ /* * IBM ScrollPoint Mouse uses this * packet type to encode both vertical * and horizontal scroll movement. */ *x = *y = 0; /* horizontal count */ if (pb->ipacket[2] & 0x0f) *z = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) ? -2 : 2; /* vertical count */ if (pb->ipacket[2] & 0xf0) *z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) ? -1 : 1; break; case 0: /* device type packet - shouldn't happen * * XXX: if this shouldn't happen, shouldn't we at least * add a kprintf indiciating to the user something bad * happened or is it that prevalent that it'd spam? -htse * * */ /* FALLTHROUGH */ default: *x = *y = 0; ms->button = ms->obutton; VLOG(1, (LOG_DEBUG, "psmintr: unknown PS2++ packet " "type %d: 0x%02x 0x%02x 0x%02x\n", MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket), pb->ipacket[0], pb->ipacket[1], pb->ipacket[2])); break; } } else { /* preserve button states */ ms->button |= ms->obutton & MOUSE_EXTBUTTONS; } } static int proc_synaptics(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms, int *x, int *y, int *z) { static int touchpad_buttons; static int guest_buttons; static finger_t f[PSM_FINGERS]; int w, id, nfingers, ewcode, extended_buttons; extended_buttons = 0; /* TouchPad PS/2 absolute mode message format with capFourButtons: * * Bits: 7 6 5 4 3 2 1 0 (LSB) * ------------------------------------------------ * ipacket[0]: 1 0 W3 W2 0 W1 R L * ipacket[1]: Yb Ya Y9 Y8 Xb Xa X9 X8 * ipacket[2]: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0 * ipacket[3]: 1 1 Yc Xc 0 W0 D U * ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 * * Legend: * L: left physical mouse button * R: right physical mouse button * D: down button * U: up button * W: "wrist" value * X: x position * Y: y position * Z: pressure * * * Without capFourButtons but with nExtendeButtons and/or capMiddle * * Bits: 7 6 5 4 3 2 1 0 (LSB) * ------------------------------------------------------ * ipacket[3]: 1 1 Yc Xc 0 W0 E^R M^L * ipacket[4]: X7 X6 X5 X4 X3|b7 X2|b5 X1|b3 X0|b1 * ipacket[5]: Y7 Y6 Y5 Y4 Y3|b8 Y2|b6 Y1|b4 Y0|b2 * * Legend: * M: Middle physical mouse button * E: Extended mouse buttons reported instead of low bits of X and Y * b1-b8: Extended mouse buttons * Only ((nExtendedButtons + 1) >> 1) bits are used in packet * 4 and 5, for reading X and Y value they should be zeroed. * * Absolute reportable limits: 0 - 6143. * Typical bezel limits: 1472 - 5472. * Typical edge marings: 1632 - 5312. * * w = 3 Passthrough Packet * * Byte 2,5,6 == Byte 1,2,3 of "Guest" */ if (!synaptics_support) return (0); /* Sanity check for out of sync packets. */ if ((pb->ipacket[0] & 0xc8) != 0x80 || (pb->ipacket[3] & 0xc8) != 0xc0) return (-1); *x = *y = 0; ms->button = ms->obutton; /* * Pressure value. * Interpretation: * z = 0 No finger contact * z = 10 Finger hovering near the pad * z = 30 Very light finger contact * z = 80 Normal finger contact * z = 110 Very heavy finger contact * z = 200 Finger lying flat on pad surface * z = 255 Maximum reportable Z */ *z = pb->ipacket[2]; /* * Finger width value * Interpretation: * w = 0 Two finger on the pad (capMultiFinger needed) * w = 1 Three or more fingers (capMultiFinger needed) * w = 2 Pen (instead of finger) (capPen needed) * w = 3 Reserved (passthrough?) * w = 4-7 Finger of normal width (capPalmDetect needed) * w = 8-14 Very wide finger or palm (capPalmDetect needed) * w = 15 Maximum reportable width (capPalmDetect needed) */ /* XXX Is checking capExtended enough? */ if (sc->synhw.capExtended) { w = ((pb->ipacket[0] & 0x30) >> 2) | ((pb->ipacket[0] & 0x04) >> 1) | ((pb->ipacket[3] & 0x04) >> 2); } else { /* Assume a finger of regular width. */ w = 4; } switch (w) { case 3: /* * Handle packets from the guest device. See: * Synaptics PS/2 TouchPad Interfacing Guide, Section 5.1 */ if (sc->synhw.capPassthrough) { *x = ((pb->ipacket[1] & 0x10) ? pb->ipacket[4] - 256 : pb->ipacket[4]); *y = ((pb->ipacket[1] & 0x20) ? pb->ipacket[5] - 256 : pb->ipacket[5]); *z = 0; guest_buttons = 0; if (pb->ipacket[1] & 0x01) guest_buttons |= MOUSE_BUTTON1DOWN; if (pb->ipacket[1] & 0x04) guest_buttons |= MOUSE_BUTTON2DOWN; if (pb->ipacket[1] & 0x02) guest_buttons |= MOUSE_BUTTON3DOWN; ms->button = touchpad_buttons | guest_buttons | sc->extended_buttons; } goto SYNAPTICS_END; case 2: /* Handle Extended W mode packets */ ewcode = (pb->ipacket[5] & 0xf0) >> 4; #if PSM_FINGERS > 1 switch (ewcode) { case 1: /* Secondary finger */ if (sc->synhw.capAdvancedGestures) f[1] = (finger_t) { .x = (((pb->ipacket[4] & 0x0f) << 8) | pb->ipacket[1]) << 1, .y = (((pb->ipacket[4] & 0xf0) << 4) | pb->ipacket[2]) << 1, .p = ((pb->ipacket[3] & 0x30) | (pb->ipacket[5] & 0x0f)) << 1, .w = PSM_FINGER_DEFAULT_W, .flags = PSM_FINGER_FUZZY, }; else if (sc->synhw.capReportsV) f[1] = (finger_t) { .x = (((pb->ipacket[4] & 0x0f) << 8) | (pb->ipacket[1] & 0xfe)) << 1, .y = (((pb->ipacket[4] & 0xf0) << 4) | (pb->ipacket[2] & 0xfe)) << 1, .p = ((pb->ipacket[3] & 0x30) | (pb->ipacket[5] & 0x0e)) << 1, .w = (((pb->ipacket[5] & 0x01) << 2) | ((pb->ipacket[2] & 0x01) << 1) | (pb->ipacket[1] & 0x01)) + 8, .flags = PSM_FINGER_FUZZY, }; default: break; } #endif goto SYNAPTICS_END; case 1: case 0: nfingers = w + 2; break; default: nfingers = 1; } if (sc->syninfo.touchpad_off) goto SYNAPTICS_END; /* Button presses */ touchpad_buttons = 0; if (pb->ipacket[0] & 0x01) touchpad_buttons |= MOUSE_BUTTON1DOWN; if (pb->ipacket[0] & 0x02) touchpad_buttons |= MOUSE_BUTTON3DOWN; if (sc->synhw.capExtended && sc->synhw.capFourButtons) { if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x01) touchpad_buttons |= MOUSE_BUTTON4DOWN; if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x02) touchpad_buttons |= MOUSE_BUTTON5DOWN; } else if (sc->synhw.capExtended && sc->synhw.capMiddle && !sc->synhw.capClickPad) { /* Middle Button */ if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01) touchpad_buttons |= MOUSE_BUTTON2DOWN; } else if (sc->synhw.capExtended && (sc->synhw.nExtendedButtons > 0)) { /* Extended Buttons */ if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x02) { if (sc->syninfo.directional_scrolls) { if (pb->ipacket[4] & 0x01) extended_buttons |= MOUSE_BUTTON4DOWN; if (pb->ipacket[5] & 0x01) extended_buttons |= MOUSE_BUTTON5DOWN; if (pb->ipacket[4] & 0x02) extended_buttons |= MOUSE_BUTTON6DOWN; if (pb->ipacket[5] & 0x02) extended_buttons |= MOUSE_BUTTON7DOWN; } else { if (pb->ipacket[4] & 0x01) extended_buttons |= MOUSE_BUTTON1DOWN; if (pb->ipacket[5] & 0x01) extended_buttons |= MOUSE_BUTTON3DOWN; if (pb->ipacket[4] & 0x02) extended_buttons |= MOUSE_BUTTON2DOWN; sc->extended_buttons = extended_buttons; } /* * Zero out bits used by extended buttons to avoid * misinterpretation of the data absolute position. * * The bits represented by * * (nExtendedButtons + 1) >> 1 * * will be masked out in both bytes. * The mask for n bits is computed with the formula * * (1 << n) - 1 */ int maskedbits = 0; int mask = 0; maskedbits = (sc->synhw.nExtendedButtons + 1) >> 1; mask = (1 << maskedbits) - 1; pb->ipacket[4] &= ~(mask); pb->ipacket[5] &= ~(mask); } else if (!sc->syninfo.directional_scrolls && !sc->gesture.in_vscroll) { /* * Keep reporting MOUSE DOWN until we get a new packet * indicating otherwise. */ extended_buttons |= sc->extended_buttons; } } /* Handle ClickPad */ if (sc->synhw.capClickPad && ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01)) touchpad_buttons |= MOUSE_BUTTON1DOWN; if (sc->synhw.capReportsV && nfingers > 1) f[0] = (finger_t) { .x = ((pb->ipacket[3] & 0x10) << 8) | ((pb->ipacket[1] & 0x0f) << 8) | (pb->ipacket[4] & 0xfd), .y = ((pb->ipacket[3] & 0x20) << 7) | ((pb->ipacket[1] & 0xf0) << 4) | (pb->ipacket[5] & 0xfd), .p = *z & 0xfe, .w = (((pb->ipacket[2] & 0x01) << 2) | (pb->ipacket[5] & 0x02) | ((pb->ipacket[4] & 0x02) >> 1)) + 8, .flags = PSM_FINGER_FUZZY, }; else f[0] = (finger_t) { .x = ((pb->ipacket[3] & 0x10) << 8) | ((pb->ipacket[1] & 0x0f) << 8) | pb->ipacket[4], .y = ((pb->ipacket[3] & 0x20) << 7) | ((pb->ipacket[1] & 0xf0) << 4) | pb->ipacket[5], .p = *z, .w = w, .flags = nfingers > 1 ? PSM_FINGER_FUZZY : 0, }; /* Ignore hovering and unmeasurable touches */ if (f[0].p < sc->syninfo.min_pressure || f[0].x < 2) nfingers = 0; for (id = 0; id < PSM_FINGERS; id++) if (id >= nfingers) PSM_FINGER_RESET(f[id]); ms->button = touchpad_buttons; /* Palm detection doesn't terminate the current action. */ if (!psmpalmdetect(sc, &f[0], nfingers)) { psmgestures(sc, &f[0], nfingers, ms); for (id = 0; id < PSM_FINGERS; id++) psmsmoother(sc, &f[id], id, ms, x, y); } else { VLOG(2, (LOG_DEBUG, "synaptics: palm detected! (%d)\n", f[0].w)); } ms->button |= extended_buttons | guest_buttons; SYNAPTICS_END: /* * Use the extra buttons as a scrollwheel * * XXX X.Org uses the Z axis for vertical wheel only, * whereas moused(8) understands special values to differ * vertical and horizontal wheels. * * xf86-input-mouse needs therefore a small patch to * understand these special values. Without it, the * horizontal wheel acts as a vertical wheel in X.Org. * * That's why the horizontal wheel is disabled by * default for now. */ if (ms->button & MOUSE_BUTTON4DOWN) { *z = -1; } else if (ms->button & MOUSE_BUTTON5DOWN) { *z = 1; } else if (ms->button & MOUSE_BUTTON6DOWN) { *z = -2; } else if (ms->button & MOUSE_BUTTON7DOWN) { *z = 2; } else *z = 0; ms->button &= ~(MOUSE_BUTTON4DOWN | MOUSE_BUTTON5DOWN | MOUSE_BUTTON6DOWN | MOUSE_BUTTON7DOWN); return (0); } static int psmpalmdetect(struct psm_softc *sc, finger_t *f, int nfingers) { if (!( ((sc->synhw.capMultiFinger || sc->synhw.capAdvancedGestures) && nfingers > 1) || (sc->synhw.capPalmDetect && f->w <= sc->syninfo.max_width) || (!sc->synhw.capPalmDetect && f->p <= sc->syninfo.max_pressure) || (sc->synhw.capPen && f->flags & PSM_FINGER_IS_PEN))) { /* * We consider the packet irrelevant for the current * action when: * - the width isn't comprised in: * [1; max_width] * - the pressure isn't comprised in: * [min_pressure; max_pressure] * - pen aren't supported but PSM_FINGER_IS_PEN is set */ return (1); } return (0); } static void psmgestures(struct psm_softc *sc, finger_t *fingers, int nfingers, mousestatus_t *ms) { smoother_t *smoother; gesture_t *gest; finger_t *f; int y_ok, center_button, center_x, right_button, right_x, i; f = &fingers[0]; smoother = &sc->smoother[0]; gest = &sc->gesture; /* Find first active finger. */ if (nfingers > 0) { for (i = 0; i < PSM_FINGERS; i++) { if (PSM_FINGER_IS_SET(fingers[i])) { f = &fingers[i]; smoother = &sc->smoother[i]; break; } } } /* * Check pressure to detect a real wanted action on the * touchpad. */ if (f->p >= sc->syninfo.min_pressure) { int x0, y0; int dxp, dyp; int start_x, start_y; int queue_len; int margin_top, margin_right, margin_bottom, margin_left; int window_min, window_max; int vscroll_hor_area, vscroll_ver_area; int two_finger_scroll; int max_x, max_y; /* silence gcc warnings for last VLOG call */ dxp = dyp = 0; /* Read sysctl. */ /* XXX Verify values? */ margin_top = sc->syninfo.margin_top; margin_right = sc->syninfo.margin_right; margin_bottom = sc->syninfo.margin_bottom; margin_left = sc->syninfo.margin_left; window_min = sc->syninfo.window_min; window_max = sc->syninfo.window_max; vscroll_hor_area = sc->syninfo.vscroll_hor_area; vscroll_ver_area = sc->syninfo.vscroll_ver_area; two_finger_scroll = sc->syninfo.two_finger_scroll; max_x = sc->syninfo.max_x; max_y = sc->syninfo.max_y; /* Read current absolute position. */ x0 = f->x; y0 = f->y; /* * Limit the coordinates to the specified margins because * this area isn't very reliable. */ if (x0 <= margin_left) x0 = margin_left; else if (x0 >= max_x - margin_right) x0 = max_x - margin_right; if (y0 <= margin_bottom) y0 = margin_bottom; else if (y0 >= max_y - margin_top) y0 = max_y - margin_top; VLOG(3, (LOG_DEBUG, "synaptics: ipacket: [%d, %d], %d, %d\n", x0, y0, f->p, f->w)); /* * If the action is just beginning, init the structure and * compute tap timeout. */ if (!(sc->flags & PSM_FLAGS_FINGERDOWN)) { VLOG(3, (LOG_DEBUG, "synaptics: ----\n")); /* Initialize queue. */ gest->window_min = window_min; /* Reset pressure peak. */ gest->zmax = 0; /* Reset fingers count. */ gest->fingers_nb = 0; /* Reset virtual scrolling state. */ gest->in_vscroll = 0; /* Compute tap timeout. */ gest->taptimeout.tv_sec = tap_timeout / 1000000; gest->taptimeout.tv_usec = tap_timeout % 1000000; timevaladd(&gest->taptimeout, &sc->lastsoftintr); sc->flags |= PSM_FLAGS_FINGERDOWN; /* Smoother has not been reset yet */ queue_len = 1; start_x = x0; start_y = y0; } else { queue_len = smoother->queue_len + 1; start_x = smoother->start_x; start_y = smoother->start_y; } /* Process ClickPad softbuttons */ if (sc->synhw.capClickPad && ms->button & MOUSE_BUTTON1DOWN) { y_ok = sc->syninfo.softbuttons_y >= 0 ? start_y < sc->syninfo.softbuttons_y : start_y > max_y - sc->syninfo.softbuttons_y; center_button = MOUSE_BUTTON2DOWN; center_x = sc->syninfo.softbutton2_x; right_button = MOUSE_BUTTON3DOWN; right_x = sc->syninfo.softbutton3_x; if (center_x > 0 && right_x > 0 && center_x > right_x) { center_button = MOUSE_BUTTON3DOWN; center_x = sc->syninfo.softbutton3_x; right_button = MOUSE_BUTTON2DOWN; right_x = sc->syninfo.softbutton2_x; } if (right_x > 0 && start_x > right_x && y_ok) ms->button = (ms->button & ~MOUSE_BUTTON1DOWN) | right_button; else if (center_x > 0 && start_x > center_x && y_ok) ms->button = (ms->button & ~MOUSE_BUTTON1DOWN) | center_button; } /* If in tap-hold, add the recorded button. */ if (gest->in_taphold) ms->button |= gest->tap_button; /* * For tap, we keep the maximum number of fingers and the * pressure peak. Also with multiple fingers, we increase * the minimum window. */ if (nfingers > 1) gest->window_min = window_max; gest->fingers_nb = imax(nfingers, gest->fingers_nb); gest->zmax = imax(f->p, gest->zmax); /* Do we have enough packets to consider this a gesture? */ if (queue_len < gest->window_min) return; /* Is a scrolling action occurring? */ if (!gest->in_taphold && !ms->button && (!gest->in_vscroll || two_finger_scroll)) { /* * A scrolling action must not conflict with a tap * action. Here are the conditions to consider a * scrolling action: * - the action in a configurable area * - one of the following: * . the distance between the last packet and the * first should be above a configurable minimum * . tap timed out */ dxp = abs(x0 - start_x); dyp = abs(y0 - start_y); if (timevalcmp(&sc->lastsoftintr, &gest->taptimeout, >) || dxp >= sc->syninfo.vscroll_min_delta || dyp >= sc->syninfo.vscroll_min_delta) { /* * Handle two finger scrolling. * Note that we don't rely on fingers_nb * as that keeps the maximum number of fingers. */ if (two_finger_scroll) { if (nfingers == 2) { gest->in_vscroll += dyp ? 2 : 0; gest->in_vscroll += dxp ? 1 : 0; } } else { /* Check for horizontal scrolling. */ if ((vscroll_hor_area > 0 && start_y <= vscroll_hor_area) || (vscroll_hor_area < 0 && start_y >= max_y + vscroll_hor_area)) gest->in_vscroll += 2; /* Check for vertical scrolling. */ if ((vscroll_ver_area > 0 && start_x <= vscroll_ver_area) || (vscroll_ver_area < 0 && start_x >= max_x + vscroll_ver_area)) gest->in_vscroll += 1; } /* Avoid conflicts if area overlaps. */ if (gest->in_vscroll >= 3) gest->in_vscroll = (dxp > dyp) ? 2 : 1; } } /* * Reset two finger scrolling when the number of fingers * is different from two or any button is pressed. */ if (two_finger_scroll && gest->in_vscroll != 0 && (nfingers != 2 || ms->button)) gest->in_vscroll = 0; VLOG(5, (LOG_DEBUG, "synaptics: virtual scrolling: %s " "(direction=%d, dxp=%d, dyp=%d, fingers=%d)\n", gest->in_vscroll ? "YES" : "NO", gest->in_vscroll, dxp, dyp, gest->fingers_nb)); } else if (sc->flags & PSM_FLAGS_FINGERDOWN) { /* * An action is currently taking place but the pressure * dropped under the minimum, putting an end to it. */ int taphold_timeout, dx, dy, tap_max_delta; dx = abs(smoother->queue[smoother->queue_cursor].x - smoother->start_x); dy = abs(smoother->queue[smoother->queue_cursor].y - smoother->start_y); /* Max delta is disabled for multi-fingers tap. */ if (gest->fingers_nb > 1) tap_max_delta = imax(dx, dy); else tap_max_delta = sc->syninfo.tap_max_delta; sc->flags &= ~PSM_FLAGS_FINGERDOWN; /* Check for tap. */ VLOG(3, (LOG_DEBUG, "synaptics: zmax=%d, dx=%d, dy=%d, " "delta=%d, fingers=%d, queue=%d\n", gest->zmax, dx, dy, tap_max_delta, gest->fingers_nb, smoother->queue_len)); if (!gest->in_vscroll && gest->zmax >= tap_threshold && timevalcmp(&sc->lastsoftintr, &gest->taptimeout, <=) && dx <= tap_max_delta && dy <= tap_max_delta && smoother->queue_len >= sc->syninfo.tap_min_queue) { /* * We have a tap if: * - the maximum pressure went over tap_threshold * - the action ended before tap_timeout * * To handle tap-hold, we must delay any button push to * the next action. */ if (gest->in_taphold) { /* * This is the second and last tap of a * double tap action, not a tap-hold. */ gest->in_taphold = 0; /* * For double-tap to work: * - no button press is emitted (to * simulate a button release) * - PSM_FLAGS_FINGERDOWN is set to * force the next packet to emit a * button press) */ VLOG(2, (LOG_DEBUG, "synaptics: button RELEASE: %d\n", gest->tap_button)); sc->flags |= PSM_FLAGS_FINGERDOWN; /* Schedule button press on next interrupt */ sc->idletimeout.tv_sec = psmhz > 1 ? 0 : 1; sc->idletimeout.tv_usec = psmhz > 1 ? 1000000 / psmhz : 0; } else { /* * This is the first tap: we set the * tap-hold state and notify the button * down event. */ gest->in_taphold = 1; taphold_timeout = sc->syninfo.taphold_timeout; gest->taptimeout.tv_sec = taphold_timeout / 1000000; gest->taptimeout.tv_usec = taphold_timeout % 1000000; sc->idletimeout = gest->taptimeout; timevaladd(&gest->taptimeout, &sc->lastsoftintr); switch (gest->fingers_nb) { case 3: gest->tap_button = MOUSE_BUTTON2DOWN; break; case 2: gest->tap_button = MOUSE_BUTTON3DOWN; break; default: gest->tap_button = MOUSE_BUTTON1DOWN; } VLOG(2, (LOG_DEBUG, "synaptics: button PRESS: %d\n", gest->tap_button)); ms->button |= gest->tap_button; } } else { /* * Not enough pressure or timeout: reset * tap-hold state. */ if (gest->in_taphold) { VLOG(2, (LOG_DEBUG, "synaptics: button RELEASE: %d\n", gest->tap_button)); gest->in_taphold = 0; } else { VLOG(2, (LOG_DEBUG, "synaptics: not a tap-hold\n")); } } } else if (!(sc->flags & PSM_FLAGS_FINGERDOWN) && gest->in_taphold) { /* * For a tap-hold to work, the button must remain down at * least until timeout (where the in_taphold flags will be * cleared) or during the next action. */ if (timevalcmp(&sc->lastsoftintr, &gest->taptimeout, <=)) { ms->button |= gest->tap_button; } else { VLOG(2, (LOG_DEBUG, "synaptics: button RELEASE: %d\n", gest->tap_button)); gest->in_taphold = 0; } } return; } static void psmsmoother(struct psm_softc *sc, finger_t *f, int smoother_id, mousestatus_t *ms, int *x, int *y) { smoother_t *smoother = &sc->smoother[smoother_id]; gesture_t *gest = &(sc->gesture); /* * Check pressure to detect a real wanted action on the * touchpad. */ if (f->p >= sc->syninfo.min_pressure) { int x0, y0; int cursor, peer, window; int dx, dy, dxp, dyp; int max_width, max_pressure; int margin_top, margin_right, margin_bottom, margin_left; int na_top, na_right, na_bottom, na_left; int window_min, window_max; int multiplicator; int weight_current, weight_previous, weight_len_squared; int div_min, div_max, div_len; int vscroll_hor_area, vscroll_ver_area; int two_finger_scroll; int max_x, max_y; int len, weight_prev_x, weight_prev_y; int div_max_x, div_max_y, div_x, div_y; int is_fuzzy; /* Read sysctl. */ /* XXX Verify values? */ max_width = sc->syninfo.max_width; max_pressure = sc->syninfo.max_pressure; margin_top = sc->syninfo.margin_top; margin_right = sc->syninfo.margin_right; margin_bottom = sc->syninfo.margin_bottom; margin_left = sc->syninfo.margin_left; na_top = sc->syninfo.na_top; na_right = sc->syninfo.na_right; na_bottom = sc->syninfo.na_bottom; na_left = sc->syninfo.na_left; window_min = sc->syninfo.window_min; window_max = sc->syninfo.window_max; multiplicator = sc->syninfo.multiplicator; weight_current = sc->syninfo.weight_current; weight_previous = sc->syninfo.weight_previous; weight_len_squared = sc->syninfo.weight_len_squared; div_min = sc->syninfo.div_min; div_max = sc->syninfo.div_max; div_len = sc->syninfo.div_len; vscroll_hor_area = sc->syninfo.vscroll_hor_area; vscroll_ver_area = sc->syninfo.vscroll_ver_area; two_finger_scroll = sc->syninfo.two_finger_scroll; max_x = sc->syninfo.max_x; max_y = sc->syninfo.max_y; is_fuzzy = (f->flags & PSM_FINGER_FUZZY) != 0; /* Read current absolute position. */ x0 = f->x; y0 = f->y; /* * Limit the coordinates to the specified margins because * this area isn't very reliable. */ if (x0 <= margin_left) x0 = margin_left; else if (x0 >= max_x - margin_right) x0 = max_x - margin_right; if (y0 <= margin_bottom) y0 = margin_bottom; else if (y0 >= max_y - margin_top) y0 = max_y - margin_top; /* If the action is just beginning, init the structure. */ if (smoother->active == 0) { VLOG(3, (LOG_DEBUG, "smoother%d: ---\n", smoother_id)); /* Store the first point of this action. */ smoother->start_x = x0; smoother->start_y = y0; dx = dy = 0; /* Initialize queue. */ smoother->queue_cursor = SYNAPTICS_PACKETQUEUE; smoother->queue_len = 0; /* Reset average. */ smoother->avg_dx = 0; smoother->avg_dy = 0; /* Reset squelch. */ smoother->squelch_x = 0; smoother->squelch_y = 0; /* Activate queue */ smoother->active = 1; } else { /* Calculate the current delta. */ cursor = smoother->queue_cursor; dx = x0 - smoother->queue[cursor].x; dy = y0 - smoother->queue[cursor].y; } VLOG(3, (LOG_DEBUG, "smoother%d: ipacket: [%d, %d], %d, %d\n", smoother_id, x0, y0, f->p, f->w)); /* Queue this new packet. */ cursor = SYNAPTICS_QUEUE_CURSOR(smoother->queue_cursor - 1); smoother->queue[cursor].x = x0; smoother->queue[cursor].y = y0; smoother->queue_cursor = cursor; if (smoother->queue_len < SYNAPTICS_PACKETQUEUE) smoother->queue_len++; VLOG(5, (LOG_DEBUG, "smoother%d: cursor[%d]: x=%d, y=%d, dx=%d, dy=%d\n", smoother_id, cursor, x0, y0, dx, dy)); /* Do we have enough packets to consider this a movement? */ if (smoother->queue_len < gest->window_min) return; weight_prev_x = weight_prev_y = weight_previous; div_max_x = div_max_y = div_max; if (gest->in_vscroll) { /* Dividers are different with virtual scrolling. */ div_min = sc->syninfo.vscroll_div_min; div_max_x = div_max_y = sc->syninfo.vscroll_div_max; } else { /* * There's a lot of noise in coordinates when * the finger is on the touchpad's borders. When * using this area, we apply a special weight and * div. */ if (x0 <= na_left || x0 >= max_x - na_right) { weight_prev_x = sc->syninfo.weight_previous_na; div_max_x = sc->syninfo.div_max_na; } if (y0 <= na_bottom || y0 >= max_y - na_top) { weight_prev_y = sc->syninfo.weight_previous_na; div_max_y = sc->syninfo.div_max_na; } } /* * Calculate weights for the average operands and * the divisor. Both depend on the distance between * the current packet and a previous one (based on the * window width). */ window = imin(smoother->queue_len, window_max); peer = SYNAPTICS_QUEUE_CURSOR(cursor + window - 1); dxp = abs(x0 - smoother->queue[peer].x) + 1; dyp = abs(y0 - smoother->queue[peer].y) + 1; len = (dxp * dxp) + (dyp * dyp); weight_prev_x = imin(weight_prev_x, weight_len_squared * weight_prev_x / len); weight_prev_y = imin(weight_prev_y, weight_len_squared * weight_prev_y / len); len = (dxp + dyp) / 2; div_x = div_len * div_max_x / len; div_x = imin(div_max_x, div_x); div_x = imax(div_min, div_x); div_y = div_len * div_max_y / len; div_y = imin(div_max_y, div_y); div_y = imax(div_min, div_y); VLOG(3, (LOG_DEBUG, "smoother%d: peer=%d, len=%d, weight=%d/%d, div=%d/%d\n", smoother_id, peer, len, weight_prev_x, weight_prev_y, div_x, div_y)); /* Compute averages. */ smoother->avg_dx = (weight_current * dx * multiplicator + weight_prev_x * smoother->avg_dx) / (weight_current + weight_prev_x); smoother->avg_dy = (weight_current * dy * multiplicator + weight_prev_y * smoother->avg_dy) / (weight_current + weight_prev_y); VLOG(5, (LOG_DEBUG, "smoother%d: avg_dx~=%d, avg_dy~=%d\n", smoother_id, smoother->avg_dx / multiplicator, smoother->avg_dy / multiplicator)); /* Use these averages to calculate x & y. */ smoother->squelch_x += smoother->avg_dx; dxp = smoother->squelch_x / (div_x * multiplicator); smoother->squelch_x = smoother->squelch_x % (div_x * multiplicator); smoother->squelch_y += smoother->avg_dy; dyp = smoother->squelch_y / (div_y * multiplicator); smoother->squelch_y = smoother->squelch_y % (div_y * multiplicator); switch(gest->in_vscroll) { case 0: /* Pointer movement. */ /* On real<->fuzzy finger switch the x/y pos jumps */ if (is_fuzzy == smoother->is_fuzzy) { *x += dxp; *y += dyp; } VLOG(3, (LOG_DEBUG, "smoother%d: [%d, %d] -> [%d, %d]\n", smoother_id, dx, dy, dxp, dyp)); break; case 1: /* Vertical scrolling. */ if (dyp != 0) ms->button |= (dyp > 0) ? MOUSE_BUTTON4DOWN : MOUSE_BUTTON5DOWN; break; case 2: /* Horizontal scrolling. */ if (dxp != 0) ms->button |= (dxp > 0) ? MOUSE_BUTTON7DOWN : MOUSE_BUTTON6DOWN; break; } smoother->is_fuzzy = is_fuzzy; } else { /* * Deactivate queue. Note: We can not just reset queue here * as these values are still used by gesture processor. * So postpone reset till next touch. */ smoother->active = 0; } } static int proc_elantech(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms, int *x, int *y, int *z) { static int touchpad_button, trackpoint_button; finger_t fn, f[ELANTECH_MAX_FINGERS]; int pkt, id, scale, i, nfingers, mask; if (!elantech_support) return (0); /* Determine packet format and do a sanity check for out of sync packets. */ if (ELANTECH_PKT_IS_DEBOUNCE(pb, sc->elanhw.hwversion)) pkt = ELANTECH_PKT_NOP; else if (ELANTECH_PKT_IS_TRACKPOINT(pb)) pkt = ELANTECH_PKT_TRACKPOINT; else switch (sc->elanhw.hwversion) { case 2: if (!ELANTECH_PKT_IS_V2(pb)) return (-1); pkt = (pb->ipacket[0] & 0xc0) == 0x80 ? ELANTECH_PKT_V2_2FINGER : ELANTECH_PKT_V2_COMMON; break; case 3: if (!ELANTECH_PKT_IS_V3_HEAD(pb, sc->elanhw.hascrc) && !ELANTECH_PKT_IS_V3_TAIL(pb, sc->elanhw.hascrc)) return (-1); pkt = ELANTECH_PKT_V3; break; case 4: if (!ELANTECH_PKT_IS_V4(pb, sc->elanhw.hascrc)) return (-1); switch (pb->ipacket[3] & 0x03) { case 0x00: pkt = ELANTECH_PKT_V4_STATUS; break; case 0x01: pkt = ELANTECH_PKT_V4_HEAD; break; case 0x02: pkt = ELANTECH_PKT_V4_MOTION; break; default: return (-1); } break; default: return (-1); } VLOG(5, (LOG_DEBUG, "elantech: ipacket format: %d\n", pkt)); for (id = 0; id < ELANTECH_MAX_FINGERS; id++) PSM_FINGER_RESET(f[id]); *x = *y = *z = 0; ms->button = ms->obutton; if (sc->syninfo.touchpad_off) return (0); /* Common legend * L: Left mouse button pressed * R: Right mouse button pressed * N: number of fingers on touchpad * X: absolute x value (horizontal) * Y: absolute y value (vertical) * W; width of the finger touch * P: pressure */ switch (pkt) { case ELANTECH_PKT_V2_COMMON: /* HW V2. One/Three finger touch */ /* 7 6 5 4 3 2 1 0 (LSB) * ------------------------------------------- * ipacket[0]: N1 N0 W3 W2 . . R L * ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8 * ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0 * ipacket[3]: N4 VF W1 W0 . . . B2 * ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 * ------------------------------------------- * N4: set if more than 3 fingers (only in 3 fingers mode) * VF: a kind of flag? (only on EF123, 0 when finger * is over one of the buttons, 1 otherwise) * B2: (on EF113 only, 0 otherwise), one button pressed * P & W is not reported on EF113 touchpads */ nfingers = (pb->ipacket[0] & 0xc0) >> 6; if (nfingers == 3 && (pb->ipacket[3] & 0x80)) nfingers = 4; mask = (1 << nfingers) - 1; fn = ELANTECH_FINGER_SET_XYP(pb); if (sc->elanhw.haspressure) { fn.w = ((pb->ipacket[0] & 0x30) >> 2) | ((pb->ipacket[3] & 0x30) >> 4); } else { fn.p = PSM_FINGER_DEFAULT_P; fn.w = PSM_FINGER_DEFAULT_W; } /* * HW v2 dont report exact finger positions when 3 or more * fingers are on touchpad. Use reported value as fingers * position as it is required for tap detection */ if (nfingers > 2) fn.flags = PSM_FINGER_FUZZY; for (id = 0; id < imin(nfingers, ELANTECH_MAX_FINGERS); id++) f[id] = fn; break; case ELANTECH_PKT_V2_2FINGER: /*HW V2. Two finger touch */ /* 7 6 5 4 3 2 1 0 (LSB) * ------------------------------------------- * ipacket[0]: N1 N0 AY8 AX8 . . R L * ipacket[1]: AX7 AX6 AX5 AX4 AX3 AX2 AX1 AX0 * ipacket[2]: AY7 AY6 AY5 AY4 AY3 AY2 AY1 AY0 * ipacket[3]: . . BY8 BX8 . . . . * ipacket[4]: BX7 BX6 BX5 BX4 BX3 BX2 BX1 BX0 * ipacket[5]: BY7 BY6 BY5 BY4 BY3 BY2 BY1 BY0 * ------------------------------------------- * AX: lower-left finger absolute x value * AY: lower-left finger absolute y value * BX: upper-right finger absolute x value * BY: upper-right finger absolute y value */ nfingers = 2; mask = (1 << nfingers) - 1; for (id = 0; id < imin(2, ELANTECH_MAX_FINGERS); id ++) f[id] = (finger_t) { .x = (((pb->ipacket[id * 3] & 0x10) << 4) | pb->ipacket[id * 3 + 1]) << 2, .y = (((pb->ipacket[id * 3] & 0x20) << 3) | pb->ipacket[id * 3 + 2]) << 2, .p = PSM_FINGER_DEFAULT_P, .w = PSM_FINGER_DEFAULT_W, /* HW ver.2 sends bounding box */ .flags = PSM_FINGER_FUZZY }; break; case ELANTECH_PKT_V3: /* HW Version 3 */ /* 7 6 5 4 3 2 1 0 (LSB) * ------------------------------------------- * ipacket[0]: N1 N0 W3 W2 0 1 R L * ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8 * ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0 * ipacket[3]: 0 0 W1 W0 0 0 1 0 * ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 * ------------------------------------------- */ nfingers = (pb->ipacket[0] & 0xc0) >> 6; mask = (1 << nfingers) - 1; id = nfingers - 1; fn = ELANTECH_FINGER_SET_XYP(pb); fn.w = ((pb->ipacket[0] & 0x30) >> 2) | ((pb->ipacket[3] & 0x30) >> 4); /* * HW v3 dont report exact finger positions when 3 or more * fingers are on touchpad. Use reported value as fingers * position as it is required for tap detection */ if (nfingers > 1) fn.flags = PSM_FINGER_FUZZY; for (id = 0; id < imin(nfingers, ELANTECH_MAX_FINGERS); id++) f[id] = fn; if (nfingers == 2) { if (ELANTECH_PKT_IS_V3_HEAD(pb, sc->elanhw.hascrc)) { sc->elanaction.fingers[0] = fn; return (0); } else f[0] = sc->elanaction.fingers[0]; } break; case ELANTECH_PKT_V4_STATUS: /* HW Version 4. Status packet */ /* 7 6 5 4 3 2 1 0 (LSB) * ------------------------------------------- * ipacket[0]: . . . . 0 1 R L * ipacket[1]: . . . F4 F3 F2 F1 F0 * ipacket[2]: . . . . . . . . * ipacket[3]: . . . 1 0 0 0 0 * ipacket[4]: PL . . . . . . . * ipacket[5]: . . . . . . . . * ------------------------------------------- * Fn: finger n is on touchpad * PL: palm * HV ver4 sends a status packet to indicate that the numbers * or identities of the fingers has been changed */ mask = pb->ipacket[1] & 0x1f; nfingers = bitcount32(mask); /* Skip "new finger is on touchpad" packets */ if ((sc->elanaction.mask & mask) == sc->elanaction.mask && (mask & ~sc->elanaction.mask)) { sc->elanaction.mask = mask; return (0); } break; case ELANTECH_PKT_V4_HEAD: /* HW Version 4. Head packet */ /* 7 6 5 4 3 2 1 0 (LSB) * ------------------------------------------- * ipacket[0]: W3 W2 W1 W0 0 1 R L * ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8 * ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0 * ipacket[3]: ID2 ID1 ID0 1 0 0 0 1 * ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 * ------------------------------------------- * ID: finger id * HW ver 4 sends head packets in two cases: * 1. One finger touch and movement. * 2. Next after status packet to tell new finger positions. */ mask = sc->elanaction.mask; nfingers = bitcount32(mask); id = ((pb->ipacket[3] & 0xe0) >> 5) - 1; if (id >= 0 && id < ELANTECH_MAX_FINGERS) { f[id] = ELANTECH_FINGER_SET_XYP(pb); f[id].w = (pb->ipacket[0] & 0xf0) >> 4; } break; case ELANTECH_PKT_V4_MOTION: /* HW Version 4. Motion packet */ /* 7 6 5 4 3 2 1 0 (LSB) * ------------------------------------------- * ipacket[0]: ID2 ID1 ID0 OF 0 1 R L * ipacket[1]: DX7 DX6 DX5 DX4 DX3 DX2 DX1 DX0 * ipacket[2]: DY7 DY6 DY5 DY4 DY3 DY2 DY1 DY0 * ipacket[3]: ID2 ID1 ID0 1 0 0 1 0 * ipacket[4]: DX7 DX6 DX5 DX4 DX3 DX2 DX1 DX0 * ipacket[5]: DY7 DY6 DY5 DY4 DY3 DY2 DY1 DY0 * ------------------------------------------- * OF: delta overflows (> 127 or < -128), in this case * firmware sends us (delta x / 5) and (delta y / 5) * ID: finger id * DX: delta x (two's complement) * XY: delta y (two's complement) * byte 0 ~ 2 for one finger * byte 3 ~ 5 for another finger */ mask = sc->elanaction.mask; nfingers = bitcount32(mask); scale = (pb->ipacket[0] & 0x10) ? 5 : 1; for (i = 0; i <= 3; i += 3) { id = ((pb->ipacket[i] & 0xe0) >> 5) - 1; if (id < 0 || id >= ELANTECH_MAX_FINGERS) continue; if (PSM_FINGER_IS_SET(sc->elanaction.fingers[id])) { f[id] = sc->elanaction.fingers[id]; f[id].x += imax(-f[id].x, (signed char)pb->ipacket[i+1] * scale); f[id].y += imax(-f[id].y, (signed char)pb->ipacket[i+2] * scale); } else { VLOG(3, (LOG_DEBUG, "elantech: " "HW v4 motion packet skipped\n")); } } break; case ELANTECH_PKT_TRACKPOINT: /* 7 6 5 4 3 2 1 0 (LSB) * ------------------------------------------- * ipacket[0]: 0 0 SX SY 0 M R L * ipacket[1]: ~SX 0 0 0 0 0 0 0 * ipacket[2]: ~SY 0 0 0 0 0 0 0 * ipacket[3]: 0 0 ~SY ~SX 0 1 1 0 * ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 * ------------------------------------------- * X and Y are written in two's complement spread * over 9 bits with SX/SY the relative top bit and * X7..X0 and Y7..Y0 the lower bits. */ *x = (pb->ipacket[0] & 0x20) ? pb->ipacket[4] - 256 : pb->ipacket[4]; *y = (pb->ipacket[0] & 0x10) ? pb->ipacket[5] - 256 : pb->ipacket[5]; trackpoint_button = ((pb->ipacket[0] & 0x01) ? MOUSE_BUTTON1DOWN : 0) | ((pb->ipacket[0] & 0x02) ? MOUSE_BUTTON3DOWN : 0) | ((pb->ipacket[0] & 0x04) ? MOUSE_BUTTON2DOWN : 0); ms->button = touchpad_button | trackpoint_button; return (0); case ELANTECH_PKT_NOP: return (0); default: return (-1); } for (id = 0; id < ELANTECH_MAX_FINGERS; id++) if (PSM_FINGER_IS_SET(f[id])) VLOG(2, (LOG_DEBUG, "elantech: " "finger %d: down [%d, %d], %d, %d, %d\n", id + 1, f[id].x, f[id].y, f[id].p, f[id].w, f[id].flags)); /* Touchpad button presses */ if (sc->elanhw.isclickpad) { touchpad_button = ((pb->ipacket[0] & 0x03) ? MOUSE_BUTTON1DOWN : 0); } else { touchpad_button = ((pb->ipacket[0] & 0x01) ? MOUSE_BUTTON1DOWN : 0) | ((pb->ipacket[0] & 0x02) ? MOUSE_BUTTON3DOWN : 0); } ms->button = touchpad_button | trackpoint_button; /* Palm detection doesn't terminate the current action. */ if (!psmpalmdetect(sc, &f[0], nfingers)) { /* Send finger 1 position to gesture processor */ if (PSM_FINGER_IS_SET(f[0]) || PSM_FINGER_IS_SET(f[1]) || nfingers == 0) psmgestures(sc, &f[0], imin(nfingers, 3), ms); /* Send fingers positions to movement smoothers */ for (id = 0; id < PSM_FINGERS; id++) if (PSM_FINGER_IS_SET(f[id]) || !(mask & (1 << id))) psmsmoother(sc, &f[id], id, ms, x, y); } else { VLOG(2, (LOG_DEBUG, "elantech: palm detected! (%d)\n", f[0].w)); } /* Store current finger positions in action context */ for (id = 0; id < ELANTECH_MAX_FINGERS; id++) { if (PSM_FINGER_IS_SET(f[id])) sc->elanaction.fingers[id] = f[id]; if ((sc->elanaction.mask & (1 << id)) && !(mask & (1 << id))) PSM_FINGER_RESET(sc->elanaction.fingers[id]); } sc->elanaction.mask = mask; /* Use the extra buttons as a scrollwheel */ if (ms->button & MOUSE_BUTTON4DOWN) *z = -1; else if (ms->button & MOUSE_BUTTON5DOWN) *z = 1; else if (ms->button & MOUSE_BUTTON6DOWN) *z = -2; else if (ms->button & MOUSE_BUTTON7DOWN) *z = 2; else *z = 0; ms->button &= ~(MOUSE_BUTTON4DOWN | MOUSE_BUTTON5DOWN | MOUSE_BUTTON6DOWN | MOUSE_BUTTON7DOWN); return (0); } static void proc_versapad(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms, int *x, int *y, int *z) { static int butmap_versapad[8] = { 0, MOUSE_BUTTON3DOWN, 0, MOUSE_BUTTON3DOWN, MOUSE_BUTTON1DOWN, MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, MOUSE_BUTTON1DOWN, MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN }; int c, x0, y0; /* VersaPad PS/2 absolute mode message format * * [packet1] 7 6 5 4 3 2 1 0(LSB) * ipacket[0]: 1 1 0 A 1 L T R * ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0 * ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0 * ipacket[3]: 1 1 1 A 1 L T R * ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8 * ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0 * * [note] * R: right physical mouse button (1=on) * T: touch pad virtual button (1=tapping) * L: left physical mouse button (1=on) * A: position data is valid (1=valid) * H: horizontal data (12bit signed integer. H11 is sign bit.) * V: vertical data (12bit signed integer. V11 is sign bit.) * P: pressure data * * Tapping is mapped to MOUSE_BUTTON4. */ c = pb->ipacket[0]; *x = *y = 0; ms->button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS]; ms->button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0; if (c & MOUSE_PS2VERSA_IN_USE) { x0 = pb->ipacket[1] | (((pb->ipacket[4]) & 0x0f) << 8); y0 = pb->ipacket[2] | (((pb->ipacket[4]) & 0xf0) << 4); if (x0 & 0x800) x0 -= 0x1000; if (y0 & 0x800) y0 -= 0x1000; if (sc->flags & PSM_FLAGS_FINGERDOWN) { *x = sc->xold - x0; *y = y0 - sc->yold; if (*x < 0) /* XXX */ ++*x; else if (*x) --*x; if (*y < 0) ++*y; else if (*y) --*y; } else sc->flags |= PSM_FLAGS_FINGERDOWN; sc->xold = x0; sc->yold = y0; } else sc->flags &= ~PSM_FLAGS_FINGERDOWN; } static void psmsoftintridle(void *arg) { struct psm_softc *sc = arg; packetbuf_t *pb; /* Invoke soft handler only when pqueue is empty. Otherwise it will be * invoked from psmintr soon with pqueue filled with real data */ if (sc->pqueue_start == sc->pqueue_end && sc->idlepacket.inputbytes > 0) { /* Grow circular queue backwards to avoid race with psmintr */ if (--sc->pqueue_start < 0) sc->pqueue_start = PSM_PACKETQUEUE - 1; pb = &sc->pqueue[sc->pqueue_start]; memcpy(pb, &sc->idlepacket, sizeof(packetbuf_t)); VLOG(4, (LOG_DEBUG, "psmsoftintridle: %02x %02x %02x %02x %02x %02x\n", pb->ipacket[0], pb->ipacket[1], pb->ipacket[2], pb->ipacket[3], pb->ipacket[4], pb->ipacket[5])); psmsoftintr(arg); } } static void psmsoftintr(void *arg) { /* * the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN) * into `mousestatus' button bits (MOUSE_BUTTON?DOWN). */ static int butmap[8] = { 0, MOUSE_BUTTON1DOWN, MOUSE_BUTTON3DOWN, MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, MOUSE_BUTTON2DOWN, MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN, MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN, MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN }; struct psm_softc *sc = arg; mousestatus_t ms; packetbuf_t *pb; int x, y, z, c, l; getmicrouptime(&sc->lastsoftintr); lockmgr(&sc->lock, LK_EXCLUSIVE); do { pb = &sc->pqueue[sc->pqueue_start]; c = pb->ipacket[0]; /* * A kludge for Kensington device! * The MSB of the horizontal count appears to be stored in * a strange place. */ if (sc->hw.model == MOUSE_MODEL_THINK) pb->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0; /* ignore the overflow bits... */ x = (c & MOUSE_PS2_XNEG) ? pb->ipacket[1] - 256 : pb->ipacket[1]; y = (c & MOUSE_PS2_YNEG) ? pb->ipacket[2] - 256 : pb->ipacket[2]; z = 0; ms.obutton = sc->button; /* previous button state */ ms.button = butmap[c & MOUSE_PS2_BUTTONS]; /* `tapping' action */ if (sc->config & PSM_CONFIG_FORCETAP) ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN; timevalclear(&sc->idletimeout); sc->idlepacket.inputbytes = 0; switch (sc->hw.model) { case MOUSE_MODEL_EXPLORER: /* * b7 b6 b5 b4 b3 b2 b1 b0 * byte 1: oy ox sy sx 1 M R L * byte 2: x x x x x x x x * byte 3: y y y y y y y y * byte 4: * * S2 S1 s d2 d1 d0 * * L, M, R, S1, S2: left, middle, right and side buttons * s: wheel data sign bit * d2-d0: wheel data */ z = (pb->ipacket[3] & MOUSE_EXPLORER_ZNEG) ? (pb->ipacket[3] & 0x0f) - 16 : (pb->ipacket[3] & 0x0f); ms.button |= (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN) ? MOUSE_BUTTON4DOWN : 0; ms.button |= (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN) ? MOUSE_BUTTON5DOWN : 0; break; case MOUSE_MODEL_INTELLI: case MOUSE_MODEL_NET: /* wheel data is in the fourth byte */ z = (char)pb->ipacket[3]; /* * XXX some mice may send 7 when there is no Z movement? */ if ((z >= 7) || (z <= -7)) z = 0; /* some compatible mice have additional buttons */ ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN) ? MOUSE_BUTTON4DOWN : 0; ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN) ? MOUSE_BUTTON5DOWN : 0; break; case MOUSE_MODEL_MOUSEMANPLUS: proc_mmanplus(sc, pb, &ms, &x, &y, &z); break; case MOUSE_MODEL_GLIDEPOINT: /* `tapping' action */ ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN; break; case MOUSE_MODEL_NETSCROLL: /* * three addtional bytes encode buttons and * wheel events */ ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON3DOWN) ? MOUSE_BUTTON4DOWN : 0; ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON1DOWN) ? MOUSE_BUTTON5DOWN : 0; z = (pb->ipacket[3] & MOUSE_PS2_XNEG) ? pb->ipacket[4] - 256 : pb->ipacket[4]; break; case MOUSE_MODEL_THINK: /* the fourth button state in the first byte */ ms.button |= (c & MOUSE_PS2_TAP) ? MOUSE_BUTTON4DOWN : 0; break; case MOUSE_MODEL_VERSAPAD: proc_versapad(sc, pb, &ms, &x, &y, &z); c = ((x < 0) ? MOUSE_PS2_XNEG : 0) | ((y < 0) ? MOUSE_PS2_YNEG : 0); break; case MOUSE_MODEL_4D: /* * b7 b6 b5 b4 b3 b2 b1 b0 * byte 1: s2 d2 s1 d1 1 M R L * byte 2: sx x x x x x x x * byte 3: sy y y y y y y y * * s1: wheel 1 direction * d1: wheel 1 data * s2: wheel 2 direction * d2: wheel 2 data */ x = (pb->ipacket[1] & 0x80) ? pb->ipacket[1] - 256 : pb->ipacket[1]; y = (pb->ipacket[2] & 0x80) ? pb->ipacket[2] - 256 : pb->ipacket[2]; switch (c & MOUSE_4D_WHEELBITS) { case 0x10: z = 1; break; case 0x30: z = -1; break; case 0x40: /* XXX 2nd wheel turning right */ z = 2; break; case 0xc0: /* XXX 2nd wheel turning left */ z = -2; break; } break; case MOUSE_MODEL_4DPLUS: if ((x < 16 - 256) && (y < 16 - 256)) { /* * b7 b6 b5 b4 b3 b2 b1 b0 * byte 1: 0 0 1 1 1 M R L * byte 2: 0 0 0 0 1 0 0 0 * byte 3: 0 0 0 0 S s d1 d0 * * L, M, R, S: left, middle, right, * and side buttons * s: wheel data sign bit * d1-d0: wheel data */ x = y = 0; if (pb->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN) ms.button |= MOUSE_BUTTON4DOWN; z = (pb->ipacket[2] & MOUSE_4DPLUS_ZNEG) ? ((pb->ipacket[2] & 0x07) - 8) : (pb->ipacket[2] & 0x07) ; } else { /* preserve previous button states */ ms.button |= ms.obutton & MOUSE_EXTBUTTONS; } break; case MOUSE_MODEL_SYNAPTICS: if (proc_synaptics(sc, pb, &ms, &x, &y, &z) != 0) goto next; break; case MOUSE_MODEL_ELANTECH: if (proc_elantech(sc, pb, &ms, &x, &y, &z) != 0) goto next; break; case MOUSE_MODEL_TRACKPOINT: case MOUSE_MODEL_GENERIC: default: break; } /* scale values */ if (sc->mode.accelfactor >= 1) { if (x != 0) { x = x * x / sc->mode.accelfactor; if (x == 0) x = 1; if (c & MOUSE_PS2_XNEG) x = -x; } if (y != 0) { y = y * y / sc->mode.accelfactor; if (y == 0) y = 1; if (c & MOUSE_PS2_YNEG) y = -y; } } /* * Store last packet for reinjection if it has not been * set already */ if (timevalisset(&sc->idletimeout) && sc->idlepacket.inputbytes == 0) sc->idlepacket = *pb; ms.dx = x; ms.dy = y; ms.dz = z; ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0) | (ms.obutton ^ ms.button); pb->inputbytes = tame_mouse(sc, pb, &ms, pb->ipacket); sc->status.flags |= ms.flags; sc->status.dx += ms.dx; sc->status.dy += ms.dy; sc->status.dz += ms.dz; sc->status.button = ms.button; sc->button = ms.button; sc->watchdog = FALSE; /* queue data */ if (sc->queue.count + pb->inputbytes < sizeof(sc->queue.buf)) { l = imin(pb->inputbytes, sizeof(sc->queue.buf) - sc->queue.tail); bcopy(&pb->ipacket[0], &sc->queue.buf[sc->queue.tail], l); if (pb->inputbytes > l) bcopy(&pb->ipacket[l], &sc->queue.buf[0], pb->inputbytes - l); sc->queue.tail = (sc->queue.tail + pb->inputbytes) % sizeof(sc->queue.buf); sc->queue.count += pb->inputbytes; } next: pb->inputbytes = 0; if (++sc->pqueue_start >= PSM_PACKETQUEUE) sc->pqueue_start = 0; } while (sc->pqueue_start != sc->pqueue_end); if (sc->state & PSM_ASLP) { sc->state &= ~PSM_ASLP; wakeup(sc); } KNOTE(&sc->rkq.ki_note, 0); sc->state &= ~PSM_SOFTARMED; /* schedule injection of predefined packet after idletimeout * if no data packets have been received from psmintr */ if (timevalisset(&sc->idletimeout)) { sc->state |= PSM_SOFTARMED; callout_reset(&sc->softcallout, tvtohz_high(&sc->idletimeout), psmsoftintridle, sc); VLOG(2, (LOG_DEBUG, "softintr: callout set: %d ticks\n", tvtohz_high(&sc->idletimeout))); } lockmgr(&sc->lock, LK_RELEASE); } static struct filterops psmfiltops = { FILTEROP_ISFD, NULL, psmfilter_detach, psmfilter }; static int psmkqfilter(struct dev_kqfilter_args *ap) { cdev_t dev = ap->a_head.a_dev; struct psm_softc *sc = dev->si_drv1; struct knote *kn = ap->a_kn; struct klist *klist; ap->a_result = 0; switch (kn->kn_filter) { case EVFILT_READ: kn->kn_fop = &psmfiltops; kn->kn_hook = (caddr_t)sc; break; default: ap->a_result = EOPNOTSUPP; return (0); } klist = &sc->rkq.ki_note; knote_insert(klist, kn); return (0); } static void psmfilter_detach(struct knote *kn) { struct psm_softc *sc = (struct psm_softc *)kn->kn_hook; struct klist *klist; klist = &sc->rkq.ki_note; knote_remove(klist, kn); } static int psmfilter(struct knote *kn, long hint) { struct psm_softc *sc = (struct psm_softc *)kn->kn_hook; int ready = 0; lockmgr(&sc->lock, LK_EXCLUSIVE); if (sc->queue.count > 0) ready = 1; lockmgr(&sc->lock, LK_RELEASE); return (ready); } /* vendor/model specific routines */ static int mouse_id_proc1(KBDC kbdc, int res, int scale, int *status) { if (set_mouse_resolution(kbdc, res) != res) return (FALSE); if (set_mouse_scaling(kbdc, scale) && set_mouse_scaling(kbdc, scale) && set_mouse_scaling(kbdc, scale) && (get_mouse_status(kbdc, status, 0, 3) >= 3)) return (TRUE); return (FALSE); } static int mouse_ext_command(KBDC kbdc, int command) { int c; c = (command >> 6) & 0x03; if (set_mouse_resolution(kbdc, c) != c) return (FALSE); c = (command >> 4) & 0x03; if (set_mouse_resolution(kbdc, c) != c) return (FALSE); c = (command >> 2) & 0x03; if (set_mouse_resolution(kbdc, c) != c) return (FALSE); c = (command >> 0) & 0x03; if (set_mouse_resolution(kbdc, c) != c) return (FALSE); return (TRUE); } /* Genius NetScroll Mouse, MouseSystems SmartScroll Mouse */ static int enable_groller(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; int status[3]; /* * The special sequence to enable the fourth button and the * roller. Immediately after this sequence check status bytes. * if the mouse is NetScroll, the second and the third bytes are * '3' and 'D'. */ /* * If the mouse is an ordinary PS/2 mouse, the status bytes should * look like the following. * * byte 1 bit 7 always 0 * bit 6 stream mode (0) * bit 5 disabled (0) * bit 4 1:1 scaling (0) * bit 3 always 0 * bit 0-2 button status * byte 2 resolution (PSMD_RES_HIGH) * byte 3 report rate (?) */ if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status)) return (FALSE); if ((status[1] != '3') || (status[2] != 'D')) return (FALSE); /* FIXME: SmartScroll Mouse has 5 buttons! XXX */ if (arg == PROBE) sc->hw.buttons = 4; return (TRUE); } /* Genius NetMouse/NetMouse Pro, ASCII Mie Mouse, NetScroll Optical */ static int enable_gmouse(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; int status[3]; /* * The special sequence to enable the middle, "rubber" button. * Immediately after this sequence check status bytes. * if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse, * the second and the third bytes are '3' and 'U'. * NOTE: NetMouse reports that it has three buttons although it has * two buttons and a rubber button. NetMouse Pro and MIE Mouse * say they have three buttons too and they do have a button on the * side... */ if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status)) return (FALSE); if ((status[1] != '3') || (status[2] != 'U')) return (FALSE); return (TRUE); } /* ALPS GlidePoint */ static int enable_aglide(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; int status[3]; /* * The special sequence to obtain ALPS GlidePoint specific * information. Immediately after this sequence, status bytes will * contain something interesting. * NOTE: ALPS produces several models of GlidePoint. Some of those * do not respond to this sequence, thus, cannot be detected this way. */ if (set_mouse_sampling_rate(kbdc, 100) != 100) return (FALSE); if (!mouse_id_proc1(kbdc, PSMD_RES_LOW, 2, status)) return (FALSE); if ((status[1] == PSMD_RES_LOW) || (status[2] == 100)) return (FALSE); return (TRUE); } /* Kensington ThinkingMouse/Trackball */ static int enable_kmouse(struct psm_softc *sc, enum probearg arg) { static u_char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 }; KBDC kbdc = sc->kbdc; int status[3]; int id1; int id2; int i; id1 = get_aux_id(kbdc); if (set_mouse_sampling_rate(kbdc, 10) != 10) return (FALSE); /* * The device is now in the native mode? It returns a different * ID value... */ id2 = get_aux_id(kbdc); if ((id1 == id2) || (id2 != 2)) return (FALSE); if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW) return (FALSE); #if PSM_DEBUG >= 2 /* at this point, resolution is LOW, sampling rate is 10/sec */ if (get_mouse_status(kbdc, status, 0, 3) < 3) return (FALSE); #endif /* * The special sequence to enable the third and fourth buttons. * Otherwise they behave like the first and second buttons. */ for (i = 0; i < nitems(rate); ++i) if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) return (FALSE); /* * At this point, the device is using default resolution and * sampling rate for the native mode. */ if (get_mouse_status(kbdc, status, 0, 3) < 3) return (FALSE); if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1])) return (FALSE); /* the device appears be enabled by this sequence, diable it for now */ disable_aux_dev(kbdc); empty_aux_buffer(kbdc, 5); return (TRUE); } /* Logitech MouseMan+/FirstMouse+, IBM ScrollPoint Mouse */ static int enable_mmanplus(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; int data[3]; /* the special sequence to enable the fourth button and the roller. */ /* * NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION * must be called exactly three times since the last RESET command * before this sequence. XXX */ if (!set_mouse_scaling(kbdc, 1)) return (FALSE); if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb)) return (FALSE); if (get_mouse_status(kbdc, data, 1, 3) < 3) return (FALSE); /* * PS2++ protocol, packet type 0 * * b7 b6 b5 b4 b3 b2 b1 b0 * byte 1: * 1 p3 p2 1 * * * * byte 2: 1 1 p1 p0 m1 m0 1 0 * byte 3: m7 m6 m5 m4 m3 m2 m1 m0 * * p3-p0: packet type: 0 * m7-m0: model ID: MouseMan+:0x50, * FirstMouse+:0x51, * ScrollPoint:0x58... */ /* check constant bits */ if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC) return (FALSE); if ((data[1] & 0xc3) != 0xc2) return (FALSE); /* check d3-d0 in byte 2 */ if (!MOUSE_PS2PLUS_CHECKBITS(data)) return (FALSE); /* check p3-p0 */ if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0) return (FALSE); if (arg == PROBE) { sc->hw.hwid &= 0x00ff; sc->hw.hwid |= data[2] << 8; /* save model ID */ } /* * MouseMan+ (or FirstMouse+) is now in its native mode, in which * the wheel and the fourth button events are encoded in the * special data packet. The mouse may be put in the IntelliMouse mode * if it is initialized by the IntelliMouse's method. */ return (TRUE); } /* MS IntelliMouse Explorer */ static int enable_msexplorer(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; static u_char rate0[] = { 200, 100, 80, }; static u_char rate1[] = { 200, 200, 80, }; int id; int i; /* * This is needed for at least A4Tech X-7xx mice - they do not go * straight to Explorer mode, but need to be set to Intelli mode * first. */ enable_msintelli(sc, arg); /* the special sequence to enable the extra buttons and the roller. */ for (i = 0; i < nitems(rate1); ++i) if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i]) return (FALSE); /* the device will give the genuine ID only after the above sequence */ id = get_aux_id(kbdc); if (id != PSM_EXPLORER_ID) return (FALSE); if (arg == PROBE) { sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */ sc->hw.hwid = id; } /* * XXX: this is a kludge to fool some KVM switch products * which think they are clever enough to know the 4-byte IntelliMouse * protocol, and assume any other protocols use 3-byte packets. * They don't convey 4-byte data packets from the IntelliMouse Explorer * correctly to the host computer because of this! * The following sequence is actually IntelliMouse's "wake up" * sequence; it will make the KVM think the mouse is IntelliMouse * when it is in fact IntelliMouse Explorer. */ for (i = 0; i < nitems(rate0); ++i) if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i]) break; get_aux_id(kbdc); return (TRUE); } /* * MS IntelliMouse * Logitech MouseMan+ and FirstMouse+ will also respond to this * probe routine and act like IntelliMouse. */ static int enable_msintelli(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; static u_char rate[] = { 200, 100, 80, }; int id; int i; /* the special sequence to enable the third button and the roller. */ for (i = 0; i < nitems(rate); ++i) if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) return (FALSE); /* the device will give the genuine ID only after the above sequence */ id = get_aux_id(kbdc); if (id != PSM_INTELLI_ID) return (FALSE); if (arg == PROBE) { sc->hw.buttons = 3; sc->hw.hwid = id; } return (TRUE); } /* * A4 Tech 4D Mouse * Newer wheel mice from A4 Tech may use the 4D+ protocol. */ static int enable_4dmouse(struct psm_softc *sc, enum probearg arg) { static u_char rate[] = { 200, 100, 80, 60, 40, 20 }; KBDC kbdc = sc->kbdc; int id; int i; for (i = 0; i < nitems(rate); ++i) if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) return (FALSE); id = get_aux_id(kbdc); /* * WinEasy 4D, 4 Way Scroll 4D: 6 * Cable-Free 4D: 8 (4DPLUS) * WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS) */ if (id != PSM_4DMOUSE_ID) return (FALSE); if (arg == PROBE) { sc->hw.buttons = 3; /* XXX some 4D mice have 4? */ sc->hw.hwid = id; } return (TRUE); } /* * A4 Tech 4D+ Mouse * Newer wheel mice from A4 Tech seem to use this protocol. * Older models are recognized as either 4D Mouse or IntelliMouse. */ static int enable_4dplus(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; int id; /* * enable_4dmouse() already issued the following ID sequence... static u_char rate[] = { 200, 100, 80, 60, 40, 20 }; int i; for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) return (FALSE); */ id = get_aux_id(kbdc); switch (id) { case PSM_4DPLUS_ID: break; case PSM_4DPLUS_RFSW35_ID: break; default: return (FALSE); } if (arg == PROBE) { sc->hw.buttons = (id == PSM_4DPLUS_ID) ? 4 : 3; sc->hw.hwid = id; } return (TRUE); } /* Synaptics Touchpad */ static int synaptics_sysctl(SYSCTL_HANDLER_ARGS) { struct psm_softc *sc; int error, arg; if (oidp->oid_arg1 == NULL || oidp->oid_arg2 < 0 || oidp->oid_arg2 > SYNAPTICS_SYSCTL_SOFTBUTTON3_X) return (EINVAL); sc = oidp->oid_arg1; /* Read the current value. */ arg = *(int *)((char *)sc + oidp->oid_arg2); error = sysctl_handle_int(oidp, &arg, 0, req); /* Sanity check. */ if (error || !req->newptr) return (error); /* * Check that the new value is in the concerned node's range * of values. */ switch (oidp->oid_arg2) { case SYNAPTICS_SYSCTL_MIN_PRESSURE: case SYNAPTICS_SYSCTL_MAX_PRESSURE: if (arg < 0 || arg > 255) return (EINVAL); break; case SYNAPTICS_SYSCTL_MAX_WIDTH: if (arg < 4 || arg > 15) return (EINVAL); break; case SYNAPTICS_SYSCTL_MARGIN_TOP: case SYNAPTICS_SYSCTL_MARGIN_BOTTOM: case SYNAPTICS_SYSCTL_NA_TOP: case SYNAPTICS_SYSCTL_NA_BOTTOM: if (arg < 0 || arg > sc->synhw.maximumYCoord) return (EINVAL); break; case SYNAPTICS_SYSCTL_SOFTBUTTON2_X: case SYNAPTICS_SYSCTL_SOFTBUTTON3_X: /* Softbuttons is clickpad only feature */ if (!sc->synhw.capClickPad && arg != 0) return (EINVAL); /* FALLTHROUGH */ case SYNAPTICS_SYSCTL_MARGIN_RIGHT: case SYNAPTICS_SYSCTL_MARGIN_LEFT: case SYNAPTICS_SYSCTL_NA_RIGHT: case SYNAPTICS_SYSCTL_NA_LEFT: if (arg < 0 || arg > sc->synhw.maximumXCoord) return (EINVAL); break; case SYNAPTICS_SYSCTL_WINDOW_MIN: case SYNAPTICS_SYSCTL_WINDOW_MAX: case SYNAPTICS_SYSCTL_TAP_MIN_QUEUE: if (arg < 1 || arg > SYNAPTICS_PACKETQUEUE) return (EINVAL); break; case SYNAPTICS_SYSCTL_MULTIPLICATOR: case SYNAPTICS_SYSCTL_WEIGHT_CURRENT: case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS: case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA: case SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED: case SYNAPTICS_SYSCTL_DIV_MIN: case SYNAPTICS_SYSCTL_DIV_MAX: case SYNAPTICS_SYSCTL_DIV_MAX_NA: case SYNAPTICS_SYSCTL_DIV_LEN: case SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN: case SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX: if (arg < 1) return (EINVAL); break; case SYNAPTICS_SYSCTL_TAP_MAX_DELTA: case SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT: case SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA: if (arg < 0) return (EINVAL); break; case SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA: if (arg < -sc->synhw.maximumXCoord || arg > sc->synhw.maximumXCoord) return (EINVAL); break; case SYNAPTICS_SYSCTL_SOFTBUTTONS_Y: /* Softbuttons is clickpad only feature */ if (!sc->synhw.capClickPad && arg != 0) return (EINVAL); /* FALLTHROUGH */ case SYNAPTICS_SYSCTL_VSCROLL_VER_AREA: if (arg < -sc->synhw.maximumYCoord || arg > sc->synhw.maximumYCoord) return (EINVAL); break; case SYNAPTICS_SYSCTL_TOUCHPAD_OFF: if (arg < 0 || arg > 1) return (EINVAL); break; default: return (EINVAL); } /* Update. */ *(int *)((char *)sc + oidp->oid_arg2) = arg; return (error); } static void synaptics_sysctl_create_softbuttons_tree(struct psm_softc *sc) { /* * Set predefined sizes for softbuttons. * Values are taken to match HP Pavilion dv6 clickpad drawings * with thin middle softbutton placed on separator */ /* hw.psm.synaptics.softbuttons_y */ sc->syninfo.softbuttons_y = 1700; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "softbuttons_y", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_SOFTBUTTONS_Y, synaptics_sysctl, "I", "Vertical size of softbuttons area"); /* hw.psm.synaptics.softbutton2_x */ sc->syninfo.softbutton2_x = 3100; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "softbutton2_x", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_SOFTBUTTON2_X, synaptics_sysctl, "I", "Horisontal position of 2-nd softbutton left edge (0-disable)"); /* hw.psm.synaptics.softbutton3_x */ sc->syninfo.softbutton3_x = 3900; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "softbutton3_x", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_SOFTBUTTON3_X, synaptics_sysctl, "I", "Horisontal position of 3-rd softbutton left edge (0-disable)"); } static void synaptics_sysctl_create_tree(struct psm_softc *sc, const char *name, const char *descr) { if (sc->syninfo.sysctl_tree != NULL) return; /* Attach extra synaptics sysctl nodes under hw.psm.synaptics */ sysctl_ctx_init(&sc->syninfo.sysctl_ctx); sc->syninfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->syninfo.sysctl_ctx, SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, name, CTLFLAG_RD, 0, descr); /* hw.psm.synaptics.directional_scrolls. */ sc->syninfo.directional_scrolls = 0; SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "directional_scrolls", CTLFLAG_RW|CTLFLAG_ANYBODY, &sc->syninfo.directional_scrolls, 0, "Enable hardware scrolling pad (if non-zero) or register it as " "extended buttons (if 0)"); /* hw.psm.synaptics.max_x. */ sc->syninfo.max_x = 6143; SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "max_x", CTLFLAG_RD|CTLFLAG_ANYBODY, &sc->syninfo.max_x, 0, "Horizontal reporting range"); /* hw.psm.synaptics.max_y. */ sc->syninfo.max_y = 6143; SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "max_y", CTLFLAG_RD|CTLFLAG_ANYBODY, &sc->syninfo.max_y, 0, "Vertical reporting range"); /* * Turn off two finger scroll if we have a * physical area reserved for scrolling or when * there's no multi finger support. */ if (sc->synhw.verticalScroll || (sc->synhw.capMultiFinger == 0 && sc->synhw.capAdvancedGestures == 0)) sc->syninfo.two_finger_scroll = 0; else sc->syninfo.two_finger_scroll = 1; /* hw.psm.synaptics.two_finger_scroll. */ SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "two_finger_scroll", CTLFLAG_RW|CTLFLAG_ANYBODY, &sc->syninfo.two_finger_scroll, 0, "Enable two finger scrolling"); /* hw.psm.synaptics.min_pressure. */ sc->syninfo.min_pressure = 16; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "min_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_MIN_PRESSURE, synaptics_sysctl, "I", "Minimum pressure required to start an action"); /* hw.psm.synaptics.max_pressure. */ sc->syninfo.max_pressure = 220; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "max_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_MAX_PRESSURE, synaptics_sysctl, "I", "Maximum pressure to detect palm"); /* hw.psm.synaptics.max_width. */ sc->syninfo.max_width = 10; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "max_width", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_MAX_WIDTH, synaptics_sysctl, "I", "Maximum finger width to detect palm"); /* hw.psm.synaptics.top_margin. */ sc->syninfo.margin_top = 200; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "margin_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_MARGIN_TOP, synaptics_sysctl, "I", "Top margin"); /* hw.psm.synaptics.right_margin. */ sc->syninfo.margin_right = 200; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "margin_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_MARGIN_RIGHT, synaptics_sysctl, "I", "Right margin"); /* hw.psm.synaptics.bottom_margin. */ sc->syninfo.margin_bottom = 200; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "margin_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_MARGIN_BOTTOM, synaptics_sysctl, "I", "Bottom margin"); /* hw.psm.synaptics.left_margin. */ sc->syninfo.margin_left = 200; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "margin_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_MARGIN_LEFT, synaptics_sysctl, "I", "Left margin"); /* hw.psm.synaptics.na_top. */ sc->syninfo.na_top = 1783; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "na_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_NA_TOP, synaptics_sysctl, "I", "Top noisy area, where weight_previous_na is used instead " "of weight_previous"); /* hw.psm.synaptics.na_right. */ sc->syninfo.na_right = 563; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "na_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_NA_RIGHT, synaptics_sysctl, "I", "Right noisy area, where weight_previous_na is used instead " "of weight_previous"); /* hw.psm.synaptics.na_bottom. */ sc->syninfo.na_bottom = 1408; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "na_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_NA_BOTTOM, synaptics_sysctl, "I", "Bottom noisy area, where weight_previous_na is used instead " "of weight_previous"); /* hw.psm.synaptics.na_left. */ sc->syninfo.na_left = 1600; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "na_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_NA_LEFT, synaptics_sysctl, "I", "Left noisy area, where weight_previous_na is used instead " "of weight_previous"); /* hw.psm.synaptics.window_min. */ sc->syninfo.window_min = 4; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "window_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_WINDOW_MIN, synaptics_sysctl, "I", "Minimum window size to start an action"); /* hw.psm.synaptics.window_max. */ sc->syninfo.window_max = 10; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "window_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_WINDOW_MAX, synaptics_sysctl, "I", "Maximum window size"); /* hw.psm.synaptics.multiplicator. */ sc->syninfo.multiplicator = 10000; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "multiplicator", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_MULTIPLICATOR, synaptics_sysctl, "I", "Multiplicator to increase precision in averages and divisions"); /* hw.psm.synaptics.weight_current. */ sc->syninfo.weight_current = 3; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "weight_current", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_WEIGHT_CURRENT, synaptics_sysctl, "I", "Weight of the current movement in the new average"); /* hw.psm.synaptics.weight_previous. */ sc->syninfo.weight_previous = 6; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "weight_previous", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS, synaptics_sysctl, "I", "Weight of the previous average"); /* hw.psm.synaptics.weight_previous_na. */ sc->syninfo.weight_previous_na = 20; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "weight_previous_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA, synaptics_sysctl, "I", "Weight of the previous average (inside the noisy area)"); /* hw.psm.synaptics.weight_len_squared. */ sc->syninfo.weight_len_squared = 2000; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "weight_len_squared", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED, synaptics_sysctl, "I", "Length (squared) of segments where weight_previous " "starts to decrease"); /* hw.psm.synaptics.div_min. */ sc->syninfo.div_min = 9; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_DIV_MIN, synaptics_sysctl, "I", "Divisor for fast movements"); /* hw.psm.synaptics.div_max. */ sc->syninfo.div_max = 17; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_DIV_MAX, synaptics_sysctl, "I", "Divisor for slow movements"); /* hw.psm.synaptics.div_max_na. */ sc->syninfo.div_max_na = 30; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "div_max_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_DIV_MAX_NA, synaptics_sysctl, "I", "Divisor with slow movements (inside the noisy area)"); /* hw.psm.synaptics.div_len. */ sc->syninfo.div_len = 100; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "div_len", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_DIV_LEN, synaptics_sysctl, "I", "Length of segments where div_max starts to decrease"); /* hw.psm.synaptics.tap_max_delta. */ sc->syninfo.tap_max_delta = 80; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "tap_max_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_TAP_MAX_DELTA, synaptics_sysctl, "I", "Length of segments above which a tap is ignored"); /* hw.psm.synaptics.tap_min_queue. */ sc->syninfo.tap_min_queue = 2; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "tap_min_queue", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_TAP_MIN_QUEUE, synaptics_sysctl, "I", "Number of packets required to consider a tap"); /* hw.psm.synaptics.taphold_timeout. */ sc->gesture.in_taphold = 0; sc->syninfo.taphold_timeout = tap_timeout; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "taphold_timeout", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT, synaptics_sysctl, "I", "Maximum elapsed time between two taps to consider a tap-hold " "action"); /* hw.psm.synaptics.vscroll_hor_area. */ sc->syninfo.vscroll_hor_area = 0; /* 1300 */ SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "vscroll_hor_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA, synaptics_sysctl, "I", "Area reserved for horizontal virtual scrolling"); /* hw.psm.synaptics.vscroll_ver_area. */ sc->syninfo.vscroll_ver_area = -400 - sc->syninfo.margin_right; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "vscroll_ver_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_VSCROLL_VER_AREA, synaptics_sysctl, "I", "Area reserved for vertical virtual scrolling"); /* hw.psm.synaptics.vscroll_min_delta. */ sc->syninfo.vscroll_min_delta = 50; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "vscroll_min_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA, synaptics_sysctl, "I", "Minimum movement to consider virtual scrolling"); /* hw.psm.synaptics.vscroll_div_min. */ sc->syninfo.vscroll_div_min = 100; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "vscroll_div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN, synaptics_sysctl, "I", "Divisor for fast scrolling"); /* hw.psm.synaptics.vscroll_div_min. */ sc->syninfo.vscroll_div_max = 150; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "vscroll_div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX, synaptics_sysctl, "I", "Divisor for slow scrolling"); /* hw.psm.synaptics.touchpad_off. */ sc->syninfo.touchpad_off = 0; SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx, SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, "touchpad_off", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, SYNAPTICS_SYSCTL_TOUCHPAD_OFF, synaptics_sysctl, "I", "Turn off touchpad"); sc->syninfo.softbuttons_y = 0; sc->syninfo.softbutton2_x = 0; sc->syninfo.softbutton3_x = 0; /* skip softbuttons sysctl on not clickpads */ if (sc->synhw.capClickPad) synaptics_sysctl_create_softbuttons_tree(sc); } static int synaptics_preferred_mode(struct psm_softc *sc) { int mode_byte; mode_byte = 0xc4; /* request wmode where available */ if (sc->synhw.capExtended) mode_byte |= 1; return mode_byte; } static void synaptics_set_mode(struct psm_softc *sc, int mode_byte) { mouse_ext_command(sc->kbdc, mode_byte); /* "Commit" the Set Mode Byte command sent above. */ set_mouse_sampling_rate(sc->kbdc, 20); /* * Enable advanced gestures mode if supported and we are not entering * passthrough mode. */ if ((sc->synhw.capAdvancedGestures || sc->synhw.capReportsV) && !(mode_byte & (1 << 5))) { mouse_ext_command(sc->kbdc, 3); set_mouse_sampling_rate(sc->kbdc, 0xc8); } } static int enable_synaptics(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; synapticshw_t synhw; int status[3]; int buttons; VLOG(3, (LOG_DEBUG, "synaptics: BEGIN init\n")); /* * Just to be on the safe side: this avoids troubles with * following mouse_ext_command() when the previous command * was PSMC_SET_RESOLUTION. Set Scaling has no effect on * Synaptics Touchpad behaviour. */ set_mouse_scaling(kbdc, 1); /* Identify the Touchpad version. */ if (mouse_ext_command(kbdc, 0) == 0) return (FALSE); if (get_mouse_status(kbdc, status, 0, 3) != 3) return (FALSE); if (status[1] != 0x47) return (FALSE); bzero(&synhw, sizeof(synhw)); synhw.infoMinor = status[0]; synhw.infoMajor = status[2] & 0x0f; if (verbose >= 2) kprintf("Synaptics Touchpad v%d.%d\n", synhw.infoMajor, synhw.infoMinor); if (synhw.infoMajor < 4) { kprintf(" Unsupported (pre-v4) Touchpad detected\n"); return (FALSE); } /* Get the Touchpad model information. */ if (mouse_ext_command(kbdc, 3) == 0) return (FALSE); if (get_mouse_status(kbdc, status, 0, 3) != 3) return (FALSE); if ((status[1] & 0x01) != 0) { kprintf(" Failed to read model information\n"); return (FALSE); } synhw.infoRot180 = (status[0] & 0x80) != 0; synhw.infoPortrait = (status[0] & 0x40) != 0; synhw.infoSensor = status[0] & 0x3f; synhw.infoHardware = (status[1] & 0xfe) >> 1; synhw.infoNewAbs = (status[2] & 0x80) != 0; synhw.capPen = (status[2] & 0x40) != 0; synhw.infoSimplC = (status[2] & 0x20) != 0; synhw.infoGeometry = status[2] & 0x0f; if (verbose >= 2) { kprintf(" Model information:\n"); kprintf(" infoRot180: %d\n", synhw.infoRot180); kprintf(" infoPortrait: %d\n", synhw.infoPortrait); kprintf(" infoSensor: %d\n", synhw.infoSensor); kprintf(" infoHardware: %d\n", synhw.infoHardware); kprintf(" infoNewAbs: %d\n", synhw.infoNewAbs); kprintf(" capPen: %d\n", synhw.capPen); kprintf(" infoSimplC: %d\n", synhw.infoSimplC); kprintf(" infoGeometry: %d\n", synhw.infoGeometry); } /* Read the extended capability bits. */ if (mouse_ext_command(kbdc, 2) == 0) return (FALSE); if (get_mouse_status(kbdc, status, 0, 3) != 3) return (FALSE); if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) { kprintf(" Failed to read extended capability bits\n"); return (FALSE); } /* Set the different capabilities when they exist. */ buttons = 0; synhw.capExtended = (status[0] & 0x80) != 0; if (synhw.capExtended) { synhw.nExtendedQueries = (status[0] & 0x70) >> 4; synhw.capMiddle = (status[0] & 0x04) != 0; synhw.capPassthrough = (status[2] & 0x80) != 0; synhw.capLowPower = (status[2] & 0x40) != 0; synhw.capMultiFingerReport = (status[2] & 0x20) != 0; synhw.capSleep = (status[2] & 0x10) != 0; synhw.capFourButtons = (status[2] & 0x08) != 0; synhw.capBallistics = (status[2] & 0x04) != 0; synhw.capMultiFinger = (status[2] & 0x02) != 0; synhw.capPalmDetect = (status[2] & 0x01) != 0; if (!set_mouse_scaling(kbdc, 1)) return (FALSE); if (mouse_ext_command(kbdc, 0x08) == 0) return (FALSE); if (get_mouse_status(kbdc, status, 0, 3) != 3) return (FALSE); synhw.infoXupmm = status[0]; synhw.infoYupmm = status[2]; if (verbose >= 2) { kprintf(" Extended capabilities:\n"); kprintf(" capExtended: %d\n", synhw.capExtended); kprintf(" capMiddle: %d\n", synhw.capMiddle); kprintf(" nExtendedQueries: %d\n", synhw.nExtendedQueries); kprintf(" capPassthrough: %d\n", synhw.capPassthrough); kprintf(" capLowPower: %d\n", synhw.capLowPower); kprintf(" capMultiFingerReport: %d\n", synhw.capMultiFingerReport); kprintf(" capSleep: %d\n", synhw.capSleep); kprintf(" capFourButtons: %d\n", synhw.capFourButtons); kprintf(" capBallistics: %d\n", synhw.capBallistics); kprintf(" capMultiFinger: %d\n", synhw.capMultiFinger); kprintf(" capPalmDetect: %d\n", synhw.capPalmDetect); kprintf(" infoXupmm: %d\n", synhw.infoXupmm); kprintf(" infoYupmm: %d\n", synhw.infoYupmm); } /* * If nExtendedQueries is 1 or greater, then the TouchPad * supports this number of extended queries. We can load * more information about buttons using query 0x09. */ if (synhw.nExtendedQueries >= 1) { if (!set_mouse_scaling(kbdc, 1)) return (FALSE); if (mouse_ext_command(kbdc, 0x09) == 0) return (FALSE); if (get_mouse_status(kbdc, status, 0, 3) != 3) return (FALSE); synhw.verticalScroll = (status[0] & 0x01) != 0; synhw.horizontalScroll = (status[0] & 0x02) != 0; synhw.verticalWheel = (status[0] & 0x08) != 0; synhw.nExtendedButtons = (status[1] & 0xf0) >> 4; synhw.capEWmode = (status[0] & 0x04) != 0; if (verbose >= 2) { kprintf(" Extended model ID:\n"); kprintf(" verticalScroll: %d\n", synhw.verticalScroll); kprintf(" horizontalScroll: %d\n", synhw.horizontalScroll); kprintf(" verticalWheel: %d\n", synhw.verticalWheel); kprintf(" nExtendedButtons: %d\n", synhw.nExtendedButtons); kprintf(" capEWmode: %d\n", synhw.capEWmode); } /* * Add the number of extended buttons to the total * button support count, including the middle button * if capMiddle support bit is set. */ buttons = synhw.nExtendedButtons + synhw.capMiddle; } else /* * If the capFourButtons support bit is set, * add a fourth button to the total button count. */ buttons = synhw.capFourButtons ? 1 : 0; /* Read the continued capabilities bits. */ if (synhw.nExtendedQueries >= 4) { if (!set_mouse_scaling(kbdc, 1)) return (FALSE); if (mouse_ext_command(kbdc, 0x0c) == 0) return (FALSE); if (get_mouse_status(kbdc, status, 0, 3) != 3) return (FALSE); synhw.capClickPad = (status[1] & 0x01) << 1; synhw.capClickPad |= (status[0] & 0x10) != 0; synhw.capDeluxeLEDs = (status[1] & 0x02) != 0; synhw.noAbsoluteFilter = (status[1] & 0x04) != 0; synhw.capReportsV = (status[1] & 0x08) != 0; synhw.capUniformClickPad = (status[1] & 0x10) != 0; synhw.capReportsMin = (status[1] & 0x20) != 0; synhw.capInterTouch = (status[1] & 0x40) != 0; synhw.capReportsMax = (status[0] & 0x02) != 0; synhw.capClearPad = (status[0] & 0x04) != 0; synhw.capAdvancedGestures = (status[0] & 0x08) != 0; synhw.capCoveredPad = (status[0] & 0x80) != 0; if (synhw.capReportsMax) { if (!set_mouse_scaling(kbdc, 1)) return (FALSE); if (mouse_ext_command(kbdc, 0x0d) == 0) return (FALSE); if (get_mouse_status(kbdc, status, 0, 3) != 3) return (FALSE); synhw.maximumXCoord = (status[0] << 5) | ((status[1] & 0x0f) << 1); synhw.maximumYCoord = (status[2] << 5) | ((status[1] & 0xf0) >> 3); } else { /* * Typical bezel limits. Taken from 'Synaptics * PS/2 * TouchPad Interfacing Guide' p.3.2.3. */ synhw.maximumXCoord = 5472; synhw.maximumYCoord = 4448; } if (synhw.capReportsMin) { if (!set_mouse_scaling(kbdc, 1)) return (FALSE); if (mouse_ext_command(kbdc, 0x0f) == 0) return (FALSE); if (get_mouse_status(kbdc, status, 0, 3) != 3) return (FALSE); synhw.minimumXCoord = (status[0] << 5) | ((status[1] & 0x0f) << 1); synhw.minimumYCoord = (status[2] << 5) | ((status[1] & 0xf0) >> 3); } else { /* * Typical bezel limits. Taken from 'Synaptics * PS/2 * TouchPad Interfacing Guide' p.3.2.3. */ synhw.minimumXCoord = 1472; synhw.minimumYCoord = 1408; } if (verbose >= 2) { kprintf(" Continued capabilities:\n"); kprintf(" capClickPad: %d\n", synhw.capClickPad); kprintf(" capDeluxeLEDs: %d\n", synhw.capDeluxeLEDs); kprintf(" noAbsoluteFilter: %d\n", synhw.noAbsoluteFilter); kprintf(" capReportsV: %d\n", synhw.capReportsV); kprintf(" capUniformClickPad: %d\n", synhw.capUniformClickPad); kprintf(" capReportsMin: %d\n", synhw.capReportsMin); kprintf(" capInterTouch: %d\n", synhw.capInterTouch); kprintf(" capReportsMax: %d\n", synhw.capReportsMax); kprintf(" capClearPad: %d\n", synhw.capClearPad); kprintf(" capAdvancedGestures: %d\n", synhw.capAdvancedGestures); kprintf(" capCoveredPad: %d\n", synhw.capCoveredPad); if (synhw.capReportsMax) { kprintf(" maximumXCoord: %d\n", synhw.maximumXCoord); kprintf(" maximumYCoord: %d\n", synhw.maximumYCoord); } if (synhw.capReportsMin) { kprintf(" minimumXCoord: %d\n", synhw.minimumXCoord); kprintf(" minimumYCoord: %d\n", synhw.minimumYCoord); } } buttons += synhw.capClickPad; } } if (verbose >= 2) { if (synhw.capExtended) kprintf(" Additional Buttons: %d\n", buttons); else kprintf(" No extended capabilities\n"); } /* * Add the default number of 3 buttons to the total * count of supported buttons reported above. */ buttons += 3; /* * Read the mode byte. * * XXX: Note the Synaptics documentation also defines the first * byte of the response to this query to be a constant 0x3b, this * does not appear to be true for Touchpads with guest devices. */ if (mouse_ext_command(kbdc, 1) == 0) return (FALSE); if (get_mouse_status(kbdc, status, 0, 3) != 3) return (FALSE); if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) { kprintf(" Failed to read mode byte\n"); return (FALSE); } if (arg == PROBE) sc->synhw = synhw; if (!synaptics_support) return (FALSE); synaptics_set_mode(sc, synaptics_preferred_mode(sc)); if (trackpoint_support && synhw.capPassthrough) { enable_trackpoint(sc, arg); } VLOG(3, (LOG_DEBUG, "synaptics: END init (%d buttons)\n", buttons)); if (arg == PROBE) { /* Create sysctl tree. */ synaptics_sysctl_create_tree(sc, "synaptics", "Synaptics TouchPad"); sc->hw.buttons = buttons; } return (TRUE); } static void synaptics_passthrough_on(struct psm_softc *sc) { VLOG(2, (LOG_NOTICE, "psm: setting pass-through mode.\n")); synaptics_set_mode(sc, synaptics_preferred_mode(sc) | (1 << 5)); } static void synaptics_passthrough_off(struct psm_softc *sc) { VLOG(2, (LOG_NOTICE, "psm: turning pass-through mode off.\n")); set_mouse_scaling(sc->kbdc, 2); set_mouse_scaling(sc->kbdc, 1); synaptics_set_mode(sc, synaptics_preferred_mode(sc)); } /* IBM/Lenovo TrackPoint */ static int trackpoint_command(struct psm_softc *sc, int cmd, int loc, int val) { const int seq[] = { 0xe2, cmd, loc, val }; int i; if (sc->synhw.capPassthrough) synaptics_passthrough_on(sc); for (i = 0; i < nitems(seq); i++) { if (sc->synhw.capPassthrough && (seq[i] == 0xff || seq[i] == 0xe7)) if (send_aux_command(sc->kbdc, 0xe7) != PSM_ACK) { synaptics_passthrough_off(sc); return (EIO); } if (send_aux_command(sc->kbdc, seq[i]) != PSM_ACK) { if (sc->synhw.capPassthrough) synaptics_passthrough_off(sc); return (EIO); } } if (sc->synhw.capPassthrough) synaptics_passthrough_off(sc); return (0); } #define PSM_TPINFO(x) offsetof(struct psm_softc, tpinfo.x) #define TPMASK 0 #define TPLOC 1 #define TPINFO 2 static int trackpoint_sysctl(SYSCTL_HANDLER_ARGS) { static const int data[][3] = { { 0x00, 0x4a, PSM_TPINFO(sensitivity) }, { 0x00, 0x4d, PSM_TPINFO(inertia) }, { 0x00, 0x60, PSM_TPINFO(uplateau) }, { 0x00, 0x57, PSM_TPINFO(reach) }, { 0x00, 0x58, PSM_TPINFO(draghys) }, { 0x00, 0x59, PSM_TPINFO(mindrag) }, { 0x00, 0x5a, PSM_TPINFO(upthresh) }, { 0x00, 0x5c, PSM_TPINFO(threshold) }, { 0x00, 0x5d, PSM_TPINFO(jenks) }, { 0x00, 0x5e, PSM_TPINFO(ztime) }, { 0x01, 0x2c, PSM_TPINFO(pts) }, { 0x08, 0x2d, PSM_TPINFO(skipback) } }; struct psm_softc *sc; int error, newval, *oldvalp; const int *tp; if (arg1 == NULL || arg2 < 0 || arg2 >= nitems(data)) return (EINVAL); sc = arg1; tp = data[arg2]; oldvalp = (int *)((intptr_t)sc + tp[TPINFO]); newval = *oldvalp; error = sysctl_handle_int(oidp, &newval, 0, req); if (error != 0) return (error); if (newval == *oldvalp) return (0); if (newval < 0 || newval > (tp[TPMASK] == 0 ? 255 : 1)) return (EINVAL); error = trackpoint_command(sc, tp[TPMASK] == 0 ? 0x81 : 0x47, tp[TPLOC], tp[TPMASK] == 0 ? newval : tp[TPMASK]); if (error != 0) return (error); *oldvalp = newval; return (0); } static void trackpoint_sysctl_create_tree(struct psm_softc *sc) { if (sc->tpinfo.sysctl_tree != NULL) return; /* Attach extra trackpoint sysctl nodes under hw.psm.trackpoint */ sysctl_ctx_init(&sc->tpinfo.sysctl_ctx); sc->tpinfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->tpinfo.sysctl_ctx, SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "trackpoint", CTLFLAG_RD, 0, "IBM/Lenovo TrackPoint"); /* hw.psm.trackpoint.sensitivity */ sc->tpinfo.sensitivity = 0x80; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "sensitivity", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_SENSITIVITY, trackpoint_sysctl, "I", "Sensitivity"); /* hw.psm.trackpoint.negative_inertia */ sc->tpinfo.inertia = 0x06; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "negative_inertia", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_NEGATIVE_INERTIA, trackpoint_sysctl, "I", "Negative inertia factor"); /* hw.psm.trackpoint.upper_plateau */ sc->tpinfo.uplateau = 0x61; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "upper_plateau", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_UPPER_PLATEAU, trackpoint_sysctl, "I", "Transfer function upper plateau speed"); /* hw.psm.trackpoint.backup_range */ sc->tpinfo.reach = 0x0a; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "backup_range", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_BACKUP_RANGE, trackpoint_sysctl, "I", "Backup range"); /* hw.psm.trackpoint.drag_hysteresis */ sc->tpinfo.draghys = 0xff; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "drag_hysteresis", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_DRAG_HYSTERESIS, trackpoint_sysctl, "I", "Drag hysteresis"); /* hw.psm.trackpoint.minimum_drag */ sc->tpinfo.mindrag = 0x14; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "minimum_drag", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_MINIMUM_DRAG, trackpoint_sysctl, "I", "Minimum drag"); /* hw.psm.trackpoint.up_threshold */ sc->tpinfo.upthresh = 0xff; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "up_threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_UP_THRESHOLD, trackpoint_sysctl, "I", "Up threshold for release"); /* hw.psm.trackpoint.threshold */ sc->tpinfo.threshold = 0x08; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_THRESHOLD, trackpoint_sysctl, "I", "Threshold"); /* hw.psm.trackpoint.jenks_curvature */ sc->tpinfo.jenks = 0x87; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "jenks_curvature", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_JENKS_CURVATURE, trackpoint_sysctl, "I", "Jenks curvature"); /* hw.psm.trackpoint.z_time */ sc->tpinfo.ztime = 0x26; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "z_time", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_Z_TIME, trackpoint_sysctl, "I", "Z time constant"); /* hw.psm.trackpoint.press_to_select */ sc->tpinfo.pts = 0x00; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "press_to_select", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_PRESS_TO_SELECT, trackpoint_sysctl, "I", "Press to Select"); /* hw.psm.trackpoint.skip_backups */ sc->tpinfo.skipback = 0x00; SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx, SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO, "skip_backups", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY, sc, TRACKPOINT_SYSCTL_SKIP_BACKUPS, trackpoint_sysctl, "I", "Skip backups from drags"); } static void set_trackpoint_parameters(struct psm_softc *sc) { trackpoint_command(sc, 0x81, 0x4a, sc->tpinfo.sensitivity); trackpoint_command(sc, 0x81, 0x60, sc->tpinfo.uplateau); trackpoint_command(sc, 0x81, 0x4d, sc->tpinfo.inertia); trackpoint_command(sc, 0x81, 0x57, sc->tpinfo.reach); trackpoint_command(sc, 0x81, 0x58, sc->tpinfo.draghys); trackpoint_command(sc, 0x81, 0x59, sc->tpinfo.mindrag); trackpoint_command(sc, 0x81, 0x5a, sc->tpinfo.upthresh); trackpoint_command(sc, 0x81, 0x5c, sc->tpinfo.threshold); trackpoint_command(sc, 0x81, 0x5d, sc->tpinfo.jenks); trackpoint_command(sc, 0x81, 0x5e, sc->tpinfo.ztime); if (sc->tpinfo.pts == 0x01) trackpoint_command(sc, 0x47, 0x2c, 0x01); if (sc->tpinfo.skipback == 0x01) trackpoint_command(sc, 0x47, 0x2d, 0x08); } static int enable_trackpoint(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; int id; /* * If called from enable_synaptics(), make sure that passthrough * mode is enabled so we can reach the trackpoint. * However, passthrough mode must be disabled before setting the * trackpoint parameters, as rackpoint_command() enables and disables * passthrough mode on its own. */ if (sc->synhw.capPassthrough) synaptics_passthrough_on(sc); if (send_aux_command(kbdc, 0xe1) != PSM_ACK || read_aux_data(kbdc) != 0x01) goto no_trackpoint; id = read_aux_data(kbdc); if (id < 0x01) goto no_trackpoint; if (arg == PROBE) sc->tphw = id; if (!trackpoint_support) goto no_trackpoint; if (sc->synhw.capPassthrough) synaptics_passthrough_off(sc); if (arg == PROBE) { trackpoint_sysctl_create_tree(sc); /* * Don't overwrite hwid and buttons when we are * a guest device. */ if (!sc->synhw.capPassthrough) { sc->hw.hwid = id; sc->hw.buttons = 3; } } set_trackpoint_parameters(sc); return (TRUE); no_trackpoint: if (sc->synhw.capPassthrough) synaptics_passthrough_off(sc); return (FALSE); } /* Interlink electronics VersaPad */ static int enable_versapad(struct psm_softc *sc, enum probearg arg) { KBDC kbdc = sc->kbdc; int data[3]; set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */ set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */ set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */ return (FALSE); if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */ return (FALSE); set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ return (TRUE); /* PS/2 absolute mode */ } /* Elantech Touchpad */ static int elantech_read_1(KBDC kbdc, int hwversion, int reg, int *val) { int res, readcmd, retidx; int resp[3]; readcmd = hwversion == 2 ? ELANTECH_REG_READ : ELANTECH_REG_RDWR; retidx = hwversion == 4 ? 1 : 0; res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK; res |= send_aux_command(kbdc, readcmd) != PSM_ACK; res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK; res |= send_aux_command(kbdc, reg) != PSM_ACK; res |= get_mouse_status(kbdc, resp, 0, 3) != 3; if (res == 0) *val = resp[retidx]; return (res); } static int elantech_write_1(KBDC kbdc, int hwversion, int reg, int val) { int res, writecmd; writecmd = hwversion == 2 ? ELANTECH_REG_WRITE : ELANTECH_REG_RDWR; res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK; res |= send_aux_command(kbdc, writecmd) != PSM_ACK; res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK; res |= send_aux_command(kbdc, reg) != PSM_ACK; if (hwversion == 4) { res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK; res |= send_aux_command(kbdc, writecmd) != PSM_ACK; } res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK; res |= send_aux_command(kbdc, val) != PSM_ACK; res |= set_mouse_scaling(kbdc, 1) == 0; return (res); } static int elantech_cmd(KBDC kbdc, int hwversion, int cmd, int *resp) { int res; if (hwversion == 2) { res = set_mouse_scaling(kbdc, 1) == 0; res |= mouse_ext_command(kbdc, cmd) == 0; } else { res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK; res |= send_aux_command(kbdc, cmd) != PSM_ACK; } res |= get_mouse_status(kbdc, resp, 0, 3) != 3; return (res); } static int elantech_init(KBDC kbdc, elantechhw_t *elanhw) { int i, val, res, hwversion, reg10; /* set absolute mode */ hwversion = elanhw->hwversion; reg10 = -1; switch (hwversion) { case 2: reg10 = elanhw->fwversion == 0x020030 ? 0x54 : 0xc4; res = elantech_write_1(kbdc, hwversion, 0x10, reg10); if (res) break; res = elantech_write_1(kbdc, hwversion, 0x11, 0x8A); break; case 3: reg10 = 0x0b; res = elantech_write_1(kbdc, hwversion, 0x10, reg10); break; case 4: res = elantech_write_1(kbdc, hwversion, 0x07, 0x01); break; default: res = 1; } /* Read back reg 0x10 to ensure hardware is ready. */ if (res == 0 && reg10 >= 0) { for (i = 0; i < 5; i++) { if (elantech_read_1(kbdc, hwversion, 0x10, &val) == 0) break; DELAY(2000); } if (i == 5) res = 1; } if (res) kprintf("couldn't set absolute mode\n"); return (res); } static void elantech_init_synaptics(struct psm_softc *sc) { /* Set capabilites required by movement smother */ sc->synhw.infoMajor = sc->elanhw.hwversion; sc->synhw.infoMinor = sc->elanhw.fwversion; sc->synhw.infoXupmm = sc->elanhw.dpmmx; sc->synhw.infoYupmm = sc->elanhw.dpmmy; sc->synhw.verticalScroll = 0; sc->synhw.nExtendedQueries = 4; sc->synhw.capExtended = 1; sc->synhw.capPassthrough = sc->elanhw.hastrackpoint; sc->synhw.capClickPad = sc->elanhw.isclickpad; sc->synhw.capMultiFinger = 1; sc->synhw.capAdvancedGestures = 1; sc->synhw.capPalmDetect = 1; sc->synhw.capPen = 0; sc->synhw.capReportsMax = 1; sc->synhw.maximumXCoord = sc->elanhw.sizex; sc->synhw.maximumYCoord = sc->elanhw.sizey; sc->synhw.capReportsMin = 1; sc->synhw.minimumXCoord = 0; sc->synhw.minimumYCoord = 0; if (sc->syninfo.sysctl_tree == NULL) { synaptics_sysctl_create_tree(sc, "elantech", "Elantech Touchpad"); /* * Adjust synaptic smoother tunables * 1. Disable finger detection pressure threshold. Unlike * synaptics we assume the finger is acting when packet with * its X&Y arrives not when pressure exceedes some threshold * 2. Disable unrelated features like margins and noisy areas * 3. Disable virtual scroll areas as 2nd finger is preferable * 4. For clickpads set bottom quarter as 42% - 16% - 42% sized * softbuttons * 5. Scale down divisors and movement lengths by a factor of 3 * where 3 is Synaptics to Elantech (~2200/800) dpi ratio */ /* Set reporting range to be equal touchpad size */ sc->syninfo.max_x = sc->elanhw.sizex; sc->syninfo.max_y = sc->elanhw.sizey; /* Disable finger detection pressure threshold */ sc->syninfo.min_pressure = 1; /* Use full area of touchpad */ sc->syninfo.margin_top = 0; sc->syninfo.margin_right = 0; sc->syninfo.margin_bottom = 0; sc->syninfo.margin_left = 0; /* Disable noisy area */ sc->syninfo.na_top = 0; sc->syninfo.na_right = 0; sc->syninfo.na_bottom = 0; sc->syninfo.na_left = 0; /* Tune divisors and movement lengths */ sc->syninfo.weight_len_squared = 200; sc->syninfo.div_min = 3; sc->syninfo.div_max = 6; sc->syninfo.div_max_na = 10; sc->syninfo.div_len = 30; sc->syninfo.tap_max_delta = 25; /* Disable virtual scrolling areas and tune its divisors */ sc->syninfo.vscroll_hor_area = 0; sc->syninfo.vscroll_ver_area = 0; sc->syninfo.vscroll_min_delta = 15; sc->syninfo.vscroll_div_min = 30; sc->syninfo.vscroll_div_max = 50; /* Set bottom quarter as 42% - 16% - 42% sized softbuttons */ if (sc->elanhw.isclickpad) { sc->syninfo.softbuttons_y = sc->elanhw.sizey / 4; sc->syninfo.softbutton2_x = sc->elanhw.sizex * 11 / 25; sc->syninfo.softbutton3_x = sc->elanhw.sizex * 14 / 25; } } return; } static int enable_elantech(struct psm_softc *sc, enum probearg arg) { static const int ic2hw[] = /*IC: 0 1 2 3 4 5 6 7 8 9 a b c d e f */ { 0, 0, 2, 0, 2, 3, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 }; elantechhw_t elanhw; int icversion, hwversion, dptracex, dptracey, id, resp[3], dpix, dpiy; KBDC kbdc = sc->kbdc; VLOG(3, (LOG_DEBUG, "elantech: BEGIN init\n")); set_mouse_scaling(kbdc, 1); set_mouse_scaling(kbdc, 1); set_mouse_scaling(kbdc, 1); if (get_mouse_status(kbdc, resp, 0, 3) != 3) return (FALSE); if (!ELANTECH_MAGIC(resp)) return (FALSE); /* Identify the Touchpad version. */ if (elantech_cmd(kbdc, 2, ELANTECH_FW_VERSION, resp)) return (FALSE); bzero(&elanhw, sizeof(elanhw)); elanhw.fwversion = (resp[0] << 16) | (resp[1] << 8) | resp[2]; icversion = resp[0] & 0x0f; hwversion = ic2hw[icversion]; if (verbose >= 2) kprintf("Elantech touchpad hardware v.%d firmware v.0x%06x\n", hwversion, elanhw.fwversion); if (ELANTECH_HW_IS_V1(elanhw.fwversion)) { kprintf (" Unsupported touchpad hardware (v1)\n"); return (FALSE); } if (hwversion == 0) { kprintf (" Unknown touchpad hardware (firmware v.0x%06x)\n", elanhw.fwversion); return (FALSE); } /* Get the Touchpad model information. */ elanhw.hwversion = hwversion; elanhw.issemimt = hwversion == 2; elanhw.isclickpad = (resp[1] & 0x10) != 0; elanhw.hascrc = (resp[1] & 0x40) != 0; elanhw.haspressure = elanhw.fwversion >= 0x020800; /* Read the capability bits. */ if (elantech_cmd(kbdc, hwversion, ELANTECH_CAPABILITIES, resp) != 0) { kprintf(" Failed to read capability bits\n"); return (FALSE); } elanhw.ntracesx = resp[1] - 1; elanhw.ntracesy = resp[2] - 1; elanhw.hastrackpoint = (resp[0] & 0x80) != 0; /* Get the touchpad resolution */ switch (hwversion) { case 4: if (elantech_cmd(kbdc, hwversion, ELANTECH_RESOLUTION, resp) == 0) { dpix = (resp[1] & 0x0f) * 10 + 790; dpiy = ((resp[1] & 0xf0) >> 4) * 10 + 790; elanhw.dpmmx = (dpix * 10 + 5) / 254; elanhw.dpmmy = (dpiy * 10 + 5) / 254; break; } /* FALLTHROUGH */ case 2: case 3: elanhw.dpmmx = elanhw.dpmmy = 32; /* 800 dpi */ break; } if (!elantech_support) return (FALSE); if (elantech_init(kbdc, &elanhw)) { kprintf("couldn't initialize elantech touchpad\n"); return (FALSE); } /* * Get the touchpad reporting range. * On HW v.3 touchpads it should be done after switching hardware * to real resolution mode (by setting bit 3 of reg10) */ if (elantech_cmd(kbdc, hwversion, ELANTECH_FW_ID, resp) != 0) { kprintf(" Failed to read touchpad size\n"); elanhw.sizex = 10000; /* Arbitrary high values to */ elanhw.sizey = 10000; /* prevent clipping in smoother */ } else if (hwversion == 2) { dptracex = dptracey = 64; if ((elanhw.fwversion >> 16) == 0x14 && (resp[1] & 0x10) && !elantech_cmd(kbdc, hwversion, ELANTECH_SAMPLE, resp)) { dptracex = resp[1] / 2; dptracey = resp[2] / 2; } elanhw.sizex = (elanhw.ntracesx - 1) * dptracex; elanhw.sizey = (elanhw.ntracesy - 1) * dptracey; } else { elanhw.sizex = (resp[0] & 0x0f) << 8 | resp[1]; elanhw.sizey = (resp[0] & 0xf0) << 4 | resp[2]; } if (verbose >= 2) { kprintf(" Model information:\n"); kprintf(" MaxX: %d\n", elanhw.sizex); kprintf(" MaxY: %d\n", elanhw.sizey); kprintf(" DpmmX: %d\n", elanhw.dpmmx); kprintf(" DpmmY: %d\n", elanhw.dpmmy); kprintf(" TracesX: %d\n", elanhw.ntracesx); kprintf(" TracesY: %d\n", elanhw.ntracesy); kprintf(" SemiMT: %d\n", elanhw.issemimt); kprintf(" Clickpad: %d\n", elanhw.isclickpad); kprintf(" Trackpoint: %d\n", elanhw.hastrackpoint); kprintf(" CRC: %d\n", elanhw.hascrc); kprintf(" Pressure: %d\n", elanhw.haspressure); } VLOG(3, (LOG_DEBUG, "elantech: END init\n")); if (arg == PROBE) { sc->elanhw = elanhw; sc->hw.buttons = 3; /* Initialize synaptics movement smoother */ elantech_init_synaptics(sc); for (id = 0; id < ELANTECH_MAX_FINGERS; id++) PSM_FINGER_RESET(sc->elanaction.fingers[id]); } return (TRUE); } /* * Return true if 'now' is earlier than (start + (secs.usecs)). * Now may be NULL and the function will fetch the current time from * getmicrouptime(), or a cached 'now' can be passed in. * All values should be numbers derived from getmicrouptime(). */ static int timeelapsed(const struct timeval *start, int secs, int usecs, const struct timeval *now) { struct timeval snow, tv; /* if there is no 'now' passed in, the get it as a convenience. */ if (now == NULL) { getmicrouptime(&snow); now = &snow; } tv.tv_sec = secs; tv.tv_usec = usecs; timevaladd(&tv, start); return (timevalcmp(&tv, now, <)); } static int psmresume(device_t dev) { struct psm_softc *sc = device_get_softc(dev); int unit = device_get_unit(dev); int err; VLOG(2, (LOG_NOTICE, "psm%d: system resume hook called.\n", unit)); if ((sc->config & (PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND)) == 0) return (0); err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND); if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) { /* * Release the blocked process; it must be notified that * the device cannot be accessed anymore. */ sc->state &= ~PSM_ASLP; wakeup(sc); } VLOG(2, (LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit)); return (err); } DRIVER_MODULE(psm, atkbdc, psm_driver, psm_devclass, NULL, NULL); #ifdef DEV_ISA #if 0 /* * This sucks up assignments from PNPBIOS and ACPI. */ /* * When the PS/2 mouse device is reported by ACPI or PnP BIOS, it may * appear BEFORE the AT keyboard controller. As the PS/2 mouse device * can be probed and attached only after the AT keyboard controller is * attached, we shall quietly reserve the IRQ resource for later use. * If the PS/2 mouse device is reported to us AFTER the keyboard controller, * copy the IRQ resource to the PS/2 mouse device instance hanging * under the keyboard controller, then probe and attach it. */ static devclass_t psmcpnp_devclass; static device_probe_t psmcpnp_probe; static device_attach_t psmcpnp_attach; static device_method_t psmcpnp_methods[] = { DEVMETHOD(device_probe, psmcpnp_probe), DEVMETHOD(device_attach, psmcpnp_attach), { 0, 0 } }; static driver_t psmcpnp_driver = { PSMCPNP_DRIVER_NAME, psmcpnp_methods, 1, /* no softc */ }; static struct isa_pnp_id psmcpnp_ids[] = { { 0x030fd041, "PS/2 mouse port" }, /* PNP0F03 */ { 0x0e0fd041, "PS/2 mouse port" }, /* PNP0F0E */ { 0x120fd041, "PS/2 mouse port" }, /* PNP0F12 */ { 0x130fd041, "PS/2 mouse port" }, /* PNP0F13 */ { 0x1303d041, "PS/2 port" }, /* PNP0313, XXX */ { 0x02002e4f, "Dell PS/2 mouse port" }, /* Lat. X200, Dell */ { 0x0002a906, "ALPS Glide Point" }, /* ALPS Glide Point */ { 0x80374d24, "IBM PS/2 mouse port" }, /* IBM3780, ThinkPad */ { 0x81374d24, "IBM PS/2 mouse port" }, /* IBM3781, ThinkPad */ { 0x0190d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9001, Vaio */ { 0x0290d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9002, Vaio */ { 0x0390d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9003, Vaio */ { 0x0490d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9004, Vaio */ { 0 } }; static int create_a_copy(device_t atkbdc, device_t me) { device_t psm; u_long irq; /* find the PS/2 mouse device instance under the keyboard controller */ psm = device_find_child(atkbdc, PSM_DRIVER_NAME, device_get_unit(atkbdc)); if (psm == NULL) return (ENXIO); if (device_get_state(psm) != DS_NOTPRESENT) return (0); /* move our resource to the found device */ irq = bus_get_resource_start(me, SYS_RES_IRQ, 0); bus_delete_resource(me, SYS_RES_IRQ, 0); bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1, machintr_legacy_intr_cpuid(irq)); /* ...then probe and attach it */ return (device_probe_and_attach(psm)); } static int psmcpnp_probe(device_t dev) { struct resource *res; u_long irq; int rid; if (ISA_PNP_PROBE(device_get_parent(dev), dev, psmcpnp_ids)) return (ENXIO); /* * The PnP BIOS and ACPI are supposed to assign an IRQ (12) * to the PS/2 mouse device node. But, some buggy PnP BIOS * declares the PS/2 mouse device node without an IRQ resource! * If this happens, we shall refer to device hints. * If we still don't find it there, use a hardcoded value... XXX */ rid = 0; irq = bus_get_resource_start(dev, SYS_RES_IRQ, rid); if (irq <= 0) { if (resource_long_value(PSM_DRIVER_NAME, device_get_unit(dev),"irq", &irq) != 0) irq = 12; /* XXX */ device_printf(dev, "irq resource info is missing; " "assuming irq %ld\n", irq); bus_set_resource(dev, SYS_RES_IRQ, rid, irq, 1, machintr_legacy_intr_cpuid(irq)); } res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE); bus_release_resource(dev, SYS_RES_IRQ, rid, res); /* keep quiet */ if (!bootverbose) device_quiet(dev); return ((res == NULL) ? ENXIO : 0); } static int psmcpnp_attach(device_t dev) { device_t atkbdc; /* find the keyboard controller, which may be on acpi* or isa* bus */ atkbdc = devclass_get_device(devclass_find(ATKBDC_DRIVER_NAME), device_get_unit(dev)); if ((atkbdc != NULL) && (device_get_state(atkbdc) == DS_ATTACHED)) { create_a_copy(atkbdc, dev); } else { /* * If we don't have the AT keyboard controller yet, * just reserve the IRQ for later use... * (See psmidentify() above.) */ rid = 0; bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE); } return (0); } DRIVER_MODULE(psmcpnp, isa, psmcpnp_driver, psmcpnp_devclass, NULL, NULL); DRIVER_MODULE(psmcpnp, acpi, psmcpnp_driver, psmcpnp_devclass, NULL, NULL); #endif #endif /* DEV_ISA */